129990041-endo-lec-4
TRANSCRIPT
-
7/29/2019 129990041-Endo-lec-4
1/11
1 | P a g e
Working Length Determination, Endodontic Radiology
Today we will talk about working length determination , radiology in endodontic
, why we need to have working length and why its important.
We will know all of these things in todays lecture.
We will not be able to do any proper work in endodontic if you dont know
1- where you are working 2- how long you need to go deep into the canal
S0 at first we need to have a reference point to measure the distance , the
reference point should be stable.
Stable reference pointmeans that it doesnt have undermined caries which
may affect this point so it will be lost in the next visit [ so you will lose it and you
have to start again ] .
USUALLY , the reference point for : anterior teeth is the incisal edge
Posterior teeth is tip of the cusp
*You should record your reference point location and mark the working length on
the file.
Optimal length
Usually , the opening or apical foramen of the canal doesnt locate exactly at the
tip of the root , so if you have a radiograph you measure the length of the tooth
from the incisal edge to the radiographic apex [ anatomical apex ] this will be
the length of the tooth .
-
7/29/2019 129990041-Endo-lec-4
2/11
2 | P a g e
If we calculate the location of the apical foramen where it locates , usually it is up
to 2mm from the anatomical apex.
SO >> if we find out that our working length is 22mm when measure it on the
radiograph , we should subtract 2mm and we will work on 20mm.
The length that you should work on = the working length [which is the length you
have measured for the whole tooth] - 2mm
There are some terms that you will get in contact while you are working in root
canal .
FIRST The apical foramen : as we said before it isnt always on the tip of the
root so it could be on the side.
THENAnatomical apex : which is the final end of the root or the tip of the
root.
Apical constriction : you will see what do we mean by apical construction
As you see in fallowing picture :
Anatomical apex
-
7/29/2019 129990041-Endo-lec-4
3/11
3 | P a g e
If we said that our working length will start from the anatomical apex thiswill be mistaken ; because when we insert our files into the canal we will
be pushing infected materials and necrotic tissues beyond the the apex, sowe should confined our instrumentation into the canal space only.
Theoretically we said that we need to end our preparation to the apicalconstriction but it is not always present , however we need to finish our
obturation at this point to get safety distance not to push infected material
beyond the apex.
First of all as we said before , we should have a pre-operative
radiograph which one of its uses to estimate the working length and as we
said we should subtract 2mm ( 1mmfor apical constriction and the other
1mmfor magnification error )
Once you measure the length of this tooth , you take a file which can goeasily into the canal passively and you mark the length that you measured
using the ruler.
( ex : if you measure the length of central incisor and it was 22mm ,so youneed to :
mark the file using a rubber stopper which comes with the file [ yellow in
color ].
slide the rubber stopper down to 20mm length.
insert the file into the canal.
let the rubber stopper seat physically on your reference point [ to be in
touch physically with your reference point ].
-
7/29/2019 129990041-Endo-lec-4
4/11
4 | P a g e
This is film hogar [sry Im not sure of the spelling ] which especially used in
endodontic , it has empty pops inside.
Rubber stopper
To obtain accurate measurements of your working length , we need to take
radio graph after inserting the file into the tooth to make sure of our
measurements.
for our measurements on the x-ray film to be reliable we should use the
minimum file size .
the minimum size of the file for working length determination should be 20
( because the tip of the file beyond or smaller than this will not appear in the
radio graph specially in anterior teeth ) .
We said before that we have to place the rubber dam on the tooth beforeinserting any file.
It is imperative that the rubber dam be left in place during working lengthdetermination to ensure an aseptic environment and to protect the
patient from swallowing or aspirating instruments.
-
7/29/2019 129990041-Endo-lec-4
5/11
5 | P a g e
There is something called paralleling technique in taking radio graphs we
use it in endodontic to make the length of the tooth near accurate on the film and
to make everything on the tooth clear.
According to the bookthis idea is specific to maxillary teeth which is toput the film on the opposite side of the median raphe of the palate.
Ex: if you want to take a radio graph for upper right molar , so you have toput the film beyond the median raphe of the palate on the left side.
After we took the estimated working length , inserted the file into the
canal & took a radio graph we need to look and measure and see where
does the tip locate.
If its longer than apical constriction we need to estimate or calculate how much
its longer and correct it.
[ we need to calculate and measure how much the difference from theanatomical apex , If its 1mm for example we add or subtract according to
the condition )
If the difference more than 3mm , we need to take another radio graph.
-
7/29/2019 129990041-Endo-lec-4
6/11
6 | P a g e
This picture shows the variations in the calculations of corrected working
length according to the condition of the apical area
So , if we have any kind of bone resorption but there is no apical resotption=> we subtract 1.5 instead of 1
But if there is bone resorption as well as apical resorption=>we subtract 2
sometimes we have some causes that prevent us from taking a radio graph and
we cant proceed doing RCT without knowing the working length , So what we
have to do ?
There is something called apex locator this is a new technology that wasfound to tell us where is the apex of that canal and most of the time it is
really accurate , but we cant rely on this device only.
So , however you took the reading by the apex locator , you need toconfirm it with radio graph.
They say that there are some contraindications of using the apex locatorbecause it uses electrical signals that may affect patients with cardiac
pacemakers. [ its not true all the time ]
-
7/29/2019 129990041-Endo-lec-4
7/11
7 | P a g e
IMPORTANCE OF RADIOGRAPHY IN ENDODONTI
endodontic radiology needs kind of modification or manipulation of
instruments or the beam .
Radiographs perform essential functions in three areas. However, they have
limitations that require special approaches.
A single radiograph is a 2-dimensional shadow of a 3-dimensional object.
For maximum information, the third dimension must be visualized andinterpreted.
The three general areas of application are :
- diagnosis
( Root and pulp anatomy , Identifying Pathosis & Characterizing normal
structures. )
-treatment
( Determinig working length , Moving superimposed structure
Locating canals & Evaluating obturation )
- recall
( Identifying new pathosis & Evaluating Healing )
-
7/29/2019 129990041-Endo-lec-4
8/11
8 | P a g e
In the two pictures above :
Pic (A)this radio graph was taken in 90 degrees , so you will see two canals but
there is a shadow for another root .
Pic (B)this is when we took another radio graph with mesial angulations 20
degrees , we saw the small second MB canal which is arrowed by red.
A
this is a premolar where you can see a large radiolucency in the center whichrefers to ( pulp tissue ) and then suddenly this radiolucency will break and
become narrow which means a bifurcation area at that part (another root canal)
So >> you need to take another radio graph with an angulations in order to
separate these two objects from each other and to measure them.
-
7/29/2019 129990041-Endo-lec-4
9/11
9 | P a g e
Bthe same tooth but the x-ray was taken from the mesial side but in the
patients mouth we cant take it mesial because there is another tooth.
So this radio graph to show the deference between radio graph according to
the side the it was taken from it.
when two objects and the film are in a fixed position and the radiation source
(cone) is moved, images of both objects move in the opposite direction.
So , they discover a rule which is calledSLOB Rule
(Same Lingual Opposite Buccal)
* same and opposite in comparison with the direction of angulations or movemen
of the cone.
SLOB Rulemeans when you see the two canals in the film [ assuming that the
tooth is upper and the radio graph was taken mesially ]
The mesial canal on the film is the lingual canal on the tooth
The opposite one will be buccal
In the above picture :Central (x-ray) beam passing directly through a root containing two canals
will superimpose the canals on the film.
When the cone is shifted to the mesial or distal aspect, the lingual objectwill move in the same direction as the cone; the buccal object will move in
the opposite direction (SLOB rule).
-
7/29/2019 129990041-Endo-lec-4
10/11
10 | P a g e
(*actually they both move opposite to the direction of moving the cone
but the final result will be the SLOB
* The buccal shifts furthest away.
Ahere we cant see separated apex , but when we shift it mesially it
appears as two different tips
In the lower we always do distal shift
*but anterior of the lower we domesial shift
In the upper we always domesial shift
Canine right angle
Premolarsmesial shift (20 degrees)
Molars distal shift (20 degrees)
-
7/29/2019 129990041-Endo-lec-4
11/11
11 | P a g e
PLEASE GO BACK TO THE SLIDES.
forgive me for any mistake
https://www.facebook.com/muad.alzoubi.3