12g broadcast connectors
TRANSCRIPT
12G Broadcast connectors
www.coax-connectors.com
Delivering 12G in a single punch
for more information visit: www.coax-connectors.comNeed help? Call us today: +44 (0)20 8538 90902 3
COAX CableGroup
Typical Cable Dimensions Typical Cable Typesfor more information visit
www.coax-connectors.com
EF 0.023”0.58mm
0.102”2.59mm
0.159”4mm Belden 1855A, Belden 1865A, Belden 4855R
FB 0.032”0.81mm
0.145”3.68mm
0.234”5.94mm Belden 1505A, Belden 70081NH
FC 0.04”1.02mm
0.18”4.57mm
0.275”7mm Belden 1694A, Belden 1694F
FI 0.051”1.29mm
0.225”5.72mm
0.32”8.13mm Belden 1794A, Belden 4794R
Cables shown are typical of those that can be used with a COAX connector in a specified ‘Cable Group’The inclusion of any cable above does not necessarily indicate that it is suitable for any specific
application, 12G or otherwise. Please check cable manufacturer specification for suitability.
Testing notesThe above data was derived from the tests carried out on the connector part numbers indicated, and where possible using a cable rated by the manufacturer for 12G use. Where no suitable 12G cable was available, the best performing equivalent was used.
12G BNC Plug return loss
Cables & cable groups
Welcome to COAXCOAX Connectors Ltd is a leading UK designer, manufacturer and supplier of high performance RF connectors.Our products are underpinned by a high level of design expertise and an unfaltering commitment to service and quality. Having gone through a rigorous development process and extensive testing, the refined design of a COAX connector is sure to deliver the reliable and enduring performance your business needs.
The range shown in this short form brochure includes BNC and Micro BNC (HD BNC) that can be used with North American standard crimp tooling. The full range of 75ohm connectors can be found in our ‘Broadcast Catalogue’ or at www.coax-connectors.com.
COAX also offer a wide range of other 50 & 75 ohm RF connectors and cable assemblies, including SMA, SMB, N Type, TNC, MCX etc.
COAX in BroadcastFor many years, COAX Connectors Ltd., have focused on developing RF connector solutions to support the increasing demands of the Broadcast equipment and installer markets.
In this publication we feature our range of 12G BNC and Micro BNC (HD BNC) connectors that are specifically designed to handle 4K, SMPTE ST2082-1 transmissions, these connectors are suitable for a range of cable sizes and are tested to 18GHz, see chart opposite.
Korus BNCThe ‘KORUS’ 12G BNC range have distinctive black coupling nuts together with gold plated inner and outer contacts. ‘KORUS’ connectors can be used to easily distinguish new 12G circuits from the existing infrastructure.
Micro BNC (HD BNC)As equipment footprints reduce, the Micro BNC range has been developed to meet the demand for smaller 75ohm RF connectors that save space, yet still provide low loss transmission at high broadcast frequencies. Micro BNC, in certain parts of the industry, is referred to as HD BNC and both are fully compatible and intermateable. The Micro BNC from COAX has a unique and patented coupling nut that is extended at the back to make handling easier in confined spaces, United States Patent No.9,071.013 applies.
Conductor JacketInsulation
-60
-50
-40
-30
-20
-10
0
1.5GHz 3GHz 6GHz 12GHz 18GHz
10-005-W66-FA1 10-005-W66-FB1 10-005-W66-FC1 10-005-W66-FI Typical 3GHz BNC
SMPTE ST 2082-1 Return loss limits shown in red
for more information visit: www.coax-connectors.comNeed help? Call us today: +44 (0)20 8538 90904 5
Part Number Typical Cable Types(for more visit website)
CableGroup
Centre ContactCrimp
Outer ContactCrimp Features
10-005-W126-EF1Belden 1855A Belden 1865A Belden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm)
‘KORUS’ Black Coupling Nut
10-005-W126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square
(1.07mm)0.255”Hex (6.48mm)
‘KORUS’ Black Coupling Nut
10-005-W126-FC1 Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm)
‘KORUS’ Black Coupling Nut
10-005-D126-FI Belden 1794A Belden 4794R FI 0.10”Hex
(2.54mm)0.429” Hex(10.9mm) Nickel Coupling Nut
10-005-D126-EF1Belden 1855A Belden 1865A Belden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm) Nickel Coupling Nut
10-005-D126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square
(1.07mm)0.255”Hex (6.48mm) Nickel Coupling Nut
10-005-D126-FC1 Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm) Nickel Coupling Nut
Part Number Typical Cable Types(for more visit website)
CableGroup
Centre ContactCrimp
Outer ContactCrimp Features
10-104-W126-EF1Belden 1855A Belden 1865A Belden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm)
‘KORUS’ Black Coupling Nut
10-104-W126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square
(1.07mm)0.255”Hex (6.48mm)
‘KORUS’ Black Coupling Nut
10-104-W126-FC1 Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm)
‘KORUS’ Black Coupling Nut
10-104-D126-EF1Belden 1855A Belden 1865A Belden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm) Nickel Coupling Nut
10-104-D126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square
(1.07mm)0.255”Hex (6.48mm) Nickel Coupling Nut
10-104-D126-FC1 Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm) Nickel Coupling Nut
Part Number Typical Cable Types(for more visit website)
CableGroup
Centre ContactCrimp
Outer ContactCrimp Features
10-258-W126-EF1Belden 1855A Belden 1865A Belden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm)
‘KORUS’ Black Insulating bush
10-258-W126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square
(1.07mm)0.255”Hex (6.48mm)
‘KORUS’ Black Insulating bush
10-258-W126-FC1 Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm)
‘KORUS’ Black Insulating bush
10-258-B126-EF1Belden 1855A Belden 1865A Belden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm)
Nickel Plated BodyBlack Insulating bush
10-258-B126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square
(1.07mm)0.255”Hex (6.48mm)
Nickel Plated BodyBlack Insulating bush
10-258-B126-FC1 Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm)
Nickel Plated BodyBlack Insulating bush
Right angle crimp plugThe 12G BNC plugs are available with either the ‘KORUS’ black coupling nuts or standard nickel.
Straight crimp plugThe 12G BNC plugs are available with either the
‘KORUS’ black coupling nuts or standard nickel.
PCB end launch jack
Part Number Features
10-462-1-D126 - 1.6 Gold plated body with black nickel nut and washer0.623” Board
10-462-1-B126 - 1.6Nickel plated body and hardware
0.623” Board
Straight bulkhead jack insulated
BNC 75 ohm 12G BNC 75 ohm 12G
for more information visit: www.coax-connectors.comNeed help? Call us today: +44 (0)20 8538 90906 7
Part Number Figure Description Interface ArrangementLeft Right Features
10-500-W126 Fig. 1 Straight Adaptor Jack Jack ‘KORUS’ 12GHzGold plated
10-503-2-W126 Fig. 2 Straight BulkheadInsulated Adaptor Jack Jack ‘KORUS’ 12GHz
Gold plated
10-550-W126 Fig. 3 Straight Bulkhead Insulated Adaptor Jack Jack
Push-Fit to panel‘KORUS’ 12GHz see
Gold plated.
Adaptors in a range of configurations for connection within the BNC series. All adaptors have gold plated centre contacts. For connecting BNC to other coaxial connector types, see our range of Inter Series Adaptors.
Figure 1
Micro BNC (HD BNC) Micro BNC (also known as HD BNC) connectors are used extensively in the Broadcast industry as a smaller alternative to the standard BNC connector. Where high performance in a high density package is required, the Micro BNC is the ideal solution. Micro BNC connectors are fully intermateable and interchangeable with other series of HD-BNC/High density BNC.
These Micro BNCs meet the requirements of SMPTE ST 2082-1, for used in 12G UHD-SDI and Ultra HD 4K applications. With a diameter of only 0.31” (7.8mm), mounting density is increased by more than 4 times when compared with a standard BNC. If space allows, the extended coupling nut (US Patent No. 9,071.013) enables the connectors to be mated and unmated without the use of a tool.
Key features: - True 75 ohm - Tested to 18 GHz - Patented coupling nut for easy connection - Meets SMPTE ST 2082-1 for 12G-SDI
Micro BNC (HD BNC)Standard BNC
3.8” (96mm) Square Area
475% more
25 Connectors 144 Connectors0.315” (8mm) Pitch
Part Number Typical Cable Types(for more visit website)
CableGroup Centre Contact Outer Contact Features
67-005-B66-EF1Belden 1855A Belden 1865A Belden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm)
67-005-B66-FB1 Belden 1505ABelden 70081NH FB 0.042”Square
(1.07mm)0.255”Hex (6.48mm)
67-005-B66-FC1 Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm)
Straight crimp plug
BNC 75 ohm 12G Micro BNC 75 ohm 12G
Figure 3
Figure 2
Adaptors
for more information visit: www.coax-connectors.comNeed help? Call us today: +44 (0)20 8538 90908 9
Figure 1
Figure 2
Figure 1
Part Number Centre Contact
Outer Contact
DimensionA Features
67-476-D66 12.25 Solder Solder 0.490” Figure 1 - 3 Leg + Centre contact 6GHz
67-476-D66-8.3 Solder Solder 0.327” Figure 1 - 3 Leg + Centre contact 6GHz
67-468-D66 Solder Solder 0.094” Figure 2
67-468-1-D66 Solder Solder 0.146” Figure 2 - Centre contact - plated 15µ” gold
67-468-2-D66 Solder Solder 0.079” Figure 2
67-468-3-D66 Solder Solder 0.146” Figure 2
Straight and Right angle PCB jacks
Figure 2
Straight crimp jack
Part Number Typical Cable Types(for more visit website)
CableGroup Centre Contact Outer Contact
67-054-B66-EF1Belden 1855A Belden 1865ABelden 4855R
EF 0.042”Square(1.07mm)
0.178” Hex(4.52mm)
67-054-B66-FB1Belden 1505A
Belden 70081NH FB 0.042”Square(1.07mm)
0.255”Hex (6.48mm)
67-054-B66-FC1Belden 1694ABelden 1694F FC 0.042”Square
(1.07mm)0.278”Hex(7.06mm)
PCB push-on plug(without bayonet nut)These PCB plugs do not have the bayonet locking nut fitted so are ideal for board to board applications or for situations where locking is not required.
Part Number Figure Features
67-403-D126 Figure 1 Straight, surface mount, PCB jack
67-409-D126-1.6 Figure 2 End launch, PCB jack, for 0.623” Board
Figure 1
Figure 2
Figure 1
Micro BNC 75 ohm 12G Micro BNC 75 ohm 12G
Figure 2
for more information visit: www.coax-connectors.comNeed help? Call us today: +44 (0)20 8538 909010 11
Part Number Features
67-463-D66 1.6Board edge fitting to
0.623” Board12GHz
End launch PCB jack Adaptors
Part Number Features
67-863-B36 Return Loss: -30dB @ 3GHz
75 ohm termination This plug device provides a 75 ohm termination for anyunused jack port.
This part has the same rear extended coupling nut (sleeve) used for the plug connectors. The sleeve incorporates a feature that allows it to be connected and disconnected with the standard tool (96-1132) used for cable plugs.
Twin right angle PCB jack Offset & vertical stacked
Part Number Features
92-67-468-3 Figure 1
Offset stacked with screw fix to panel. 0.079”PCB legs
92-67-468-2-B126Figure 2
Vertical stacked with bulkhead nut fixing to panel. 0.094” PCB legsFigure 1
Micro BNC 75 ohm 12G Micro BNC 75 ohm 12G
See data sheet for mounting
details
General information and product safety notice.This short form publication contains only limited information on a selected range of products. Information on safety, warranty, handling
and full product details are contained in our catalogues, data sheets, website or can be supplied on request. Failure to observe this information and the operating conditions specified could result in hazardous conditions.
COAX Connectors Limited continuously works to improve their products, therefore products may deviate from the description, technical data and shape as shown in this catalogue and data sheets.
Figure 2
Figure 1
Part Number Features
67-503-D126 Bulkhead Jack to Jack with isolated metal threaded bush - Figure 1
67-512-B66 Bulkhead Plug to Jack - without coupling nut on jack, for quick test applications - Figure 2
Figure 2
Figure 1
www.coax-connectors.com
COAX Connectors Ltd.6-8 Colne Road
TwickenhamMiddlesex TW1 4JR
United Kingdom
t : +44 (0)20 8538 9090f: +44 (0)20 8538 9890
March 2017 Edition
No. 96Q13579
No. 92E13579