Elementa l LED, LLCwebs i te : e lementa l led .com 1195 Park Ave. , Su i te 211Emeryv i l le , CA 94608to l l f ree 877.564.5051fax 510.740.4457

wattage weight dimensions input output frequency protection rating

20W 1 lb. 8 oz. L=5.03 in., W=2.14 in., D=2 in. 120V AC 12V DC 60 Hz IP32 / Nema 3R

60W 4 lb. 1 oz. L=6.06 in., W=2.59 in., D=2.2 in. 120V AC 12V DC 60 Hz IP32 / Nema 3R

100W 5 lb. 12 oz. L=9.8 in., W=3 in., D=2.75 in. 120V AC 12V DC 60 Hz IP32 / Nema 3R

200W 6 lb. 5 oz. L=9.8 in., W=3 in., D=2.75 in. 120V AC 12V DC 60 Hz IP32 / Nema 3R

300W 6 lb. 5 oz. L=9.8 in., W=4.125 in., D=3.375 in. 120V AC 12V DC 60 Hz IP32 / Nema 3R

12V Dimmable DriverEL-TMDRVR

ETL Listed #4001928CSA ListedClass 2 (20W & 60W)Compatible with: 120V AC magnetic low voltage dimmersMinimum load: noneWorking Temp.: < 158°F / 70°C (104°F / 40°C ambient temp.)Knockouts: 2 x 3/4 in.

The 12V Dimmable Driver is perfect for supplying low voltage power to our dim-mable LED lights. Have you been searching everywhere for a way to dim your LED lights by using a household dimmer switch, whether you have one already in-stalled or for a new construction project? Look no further. This 12V DC transform-er can be used to power any of our dimmable LED lights, and allows you to install our low voltage LED light fixtures while using a common 120V dimmer switch. Our 12V Dimmable LED Drivers are compatible with many models of dimmer by brands such as Lutron and Leviton, which are commonly used in home and com-mercial installations, and widely available at home improvement stores.

The following Lutron brand 120V dimmers are examples of switches that are com-patible with our Dimmable Drivers: Ariadni, Diva, Glyder, Maestro Wireless, Nova, RadioRA, Skylark, Skylark Contour, Vareo, Vierti. These drivers are also compati-ble with the Control 4 Wireless Dimmer. These switches are examples of standard AC dimmers described as “magnetic low voltage.” This driver is NOT COMPAT-IBLE with our Reign Dimmer Switches, or with our 12V Inline Dimmer Switch.

This 12V indoor power supply is ETL and CSA Listed, and has a sturdy powder-coated black steel housing, for protection against the elements. The driver comes with full instructions, safety guidelines, and wiring diagrams.

For optimum performance, do not load the power supply to more than 80% of its labeled rating.

Transformer The actual transformer is encapsulated in the enclosure. Input leads are 20 AWG. Output leads are 16 AWG. Lead insulation is 105 °C.

EnclosureEnclosure temperature will not exceed 70 °C @ 40 °C ambient. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by a screw. The enclosure is black powder coated.

General • Manual reset thermal circuit breaker on the secondary

side. • Controlled with a low-voltage dimmer. • ETL listed• CSA listed• UL standard 5085-1

Max Load 20 WInput Voltage 120 V 60 HzOutput Voltage Full Load 11.4 VInput Current Full Load 206 mAOpen Circuit Volts 12.5 VDCOutput Current Full Load 1.6 AEfficiency 85.70%Coil Former Double Section BobbinThermal Class B 130 °CLeads Primary PVC 600 V #20Leads Secondary PVC 300 V #16

Dimensions in inches:Length 5.03" Width 2.14"Depth 2.00"

Input Output120 V 60 Hz 12 V DC 20 W

20W Dimmable 12V Driver

(DI-0920)

Transformer Input leads are 20 AWG. Output leads are 14 AWG. Lead insulation is 105 °C. The transformer uses a class B 130 °C insulation system.

EnclosureEnclosure temperature will not exceed 70 °C @ 40 °C ambient. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by a screw. The enclosure is black powder coated.

General • Manual reset thermal circuit breaker on the secondary side. • Controlled with a low-voltage dimmer. • ETL listed• CSA listed• UL standard 5085-1• NEMA 3R enclosure

Maximum Load 60 WInput Voltage 120 V 60 HzOutput Voltage Full Load 11.5 VDCInput Current Full Load 540 mAOpen Circuit Volts 12.5 VDCOutput Current Full Load 4.8 AEfficiency 89.20%Coil Former Double Section BobbinThermal Class B 130 °CLeads Primary PVC 600 V #20Leads Secondary PVC 300 V #14

Dimensions in inches:Length 6.06" Width 2.59"Depth 2.20"

Input Output120 V 60 Hz 12 V DC 60 W

60W Dimmable 12V Driver

(DI-0922)

Transformer Input leads are 18 AWG. Output leads are 12 AWG. Lead insulation is 105 °C. The transformer uses a class B 130 °C insulation system.

EnclosureEnclosure temperature will not exceed 70 °C @ 40 °C ambient. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by a screw. The enclosure is black powder coated.

General • Manual reset thermal circuit breaker on the secondary side. • Controlled with a low-voltage dimmer. • ETL listed• CSA listed• UL standard 5085-1• NEMA 3R enclosure

Max Load 100 WInput Voltage 120 V 60 HzOutput Voltage Full Load 11.57 VDCInput Current Full Load 898 mAOpen Circuit Volts 12.5 VDCOutput Current Full Load 8.05 AEfficiency 87.20%Coil Former Double Section BobbinThermal Class B 130 °CLeads Primary PVC 600 V #18Leads Secondary PVC 300 V #12

100W Dimmable 12V Driver

(DI-0925)

Input Output120 V 60 Hz 12 VDC 100 W

Dimensions in inches:Height 9.17" Width 3.06"Depth 2.94"

Elementa l LED, LLCwww.e lementa l led .com 1195 Park Ave. , Su i te 211Emeryv i l le , CA 94608to l l f ree 877.564.5051fax 510.740.4457

-+

Flexible LED Strip Light

12V Dimmable Driver

AC Power

120V ACMagneticLow VoltageDimmer Switch

ground

12V DC

LN

120V ACN

L