13-1

Learning ObjectivesLearning Objectives

Explain what is meant by the term lean operations system.

List each of the goals of JIT and explain its importance.

List and briefly describe the building blocks of JIT. List the benefits of the JIT system. Outline the considerations important in converting

a traditional mode of operations to a JIT system. List some of the obstacles that might be

encountered when converting to a JIT system.

13-2

JIT/Lean ProductionJIT/Lean Production

Just-in-time (JIT): A highly coordinated processing system in which goods move through the system, and services are performed, just as they are needed,

JIT lean production

JIT pull (demand) system

JIT operates with very little “fat”

13-3

Goal of JITGoal of JIT

The ultimate goal of JIT is a balanced system.

Achieves a smooth, rapid flow of materials through the system

13-4

Summary JIT Goals and Building Summary JIT Goals and Building BlocksBlocksFigure 13.1

Product Design

ProcessDesign

PersonnelElements

Manufactur-ing Planning

Eliminate disruptions

Make the system flexible Eliminate waste

Abalancedrapid flow

UltimateGoal

SupportingGoals

BuildingBlocks

13-5

Supporting GoalsSupporting Goals

Eliminate disruptions

Make system flexible

Eliminate waste, especially excess inventory

13-6

Sources of WasteSources of Waste

Overproduction

Waiting time

Unnecessary transportation

Processing waste

Inefficient work methods

Product defects

13-7

Kaizen PhilosophyKaizen Philosophy

Waste is the enemy Improvement should be done gradually and

continuously Everyone should be involved Built on a cheap strategy Can be applied anywhere

13-8

Kaizen Philosophy (cont’d)Kaizen Philosophy (cont’d)

Supported by a visual system Focuses attention where value is created Process orienteted Stresses main effort of improvement should

come from new thinking and work style The essence of organizational learning is to

learn while doing

13-9

Big JIT – broad focus Vendor relations Human relations Technology management Materials and inventory management

Little JIT – narrow focus Scheduling materials Scheduling services of production

Big vs. Little JITBig vs. Little JIT

13-10

JITJIT a Building Blocksa Building Blocks

Product design

Process design

Personnel/organizationalelements

Manufacturing planning and control

13-11

Product DesignProduct Design

Standard parts

Modular design

Highly capable production systems

Concurrentengineering

13-12

Process DesignProcess Design

Small lot sizes Setup time reduction Manufacturing cells Limited work in process Quality improvement Production flexibility Balanced system Little inventory storage

13-13

Benefits of Small Lot SizesBenefits of Small Lot Sizes

Reduces inventory

Less storage space

Less rework

Problems are more apparent

Increases product flexibility

Easier to balance operations

13-14

Single-Minute ExchangeSingle-Minute Exchange

Single-minute exchange of die (SMED): A system for reducing changeover time

Categorize changeover activities Internal – activities that can only be done while

machine is stopped External – activities that do not require stopping

the machine

13-15

Production FlexibilityProduction Flexibility

Reduce downtime by reducing changeover time

Use preventive maintenance to reduce breakdowns

Cross-train workers to help clear bottlenecks

13-16

Production Flexibility (cont’d)Production Flexibility (cont’d)

Use many small units of capacity Use off-line buffers Reserve capacity for important customers

13-17

Quality ImprovementQuality Improvement

Autonomation

Automatic detection of defects during production

Jidoka

Japanese term for autonomation

13-18

Production FlexibilityProduction Flexibility

Balance system: Distributing the workload evenly among work stations

Work assigned to each work station must be less than or equal to the cycle time

Cycle time is set equal to the takt time Takt time is the cycle time needed to match

customer demand for final product

13-19

Personnel/Organizational Personnel/Organizational ElementsElements

Workers as assets

Cross-trained workers

Continuous improvement

Cost accounting

Leadership/project management

13-20

Manufacturing Planning and Manufacturing Planning and ControlControl

Level loading

Pull systems

Visual systems

Close vendor relationships

Reduced transaction processing

Preventive maintenance

13-21

Pull/Push SystemsPull/Push Systems

Pull system: System for moving work where a workstation pulls output from the preceding station as needed. (e.g. Kanban)

Push system: System for moving work where output is pushed to the next station as it is completed

13-22

Kanban Production Control Kanban Production Control SystemSystem

Kanban: Card or other device that communicates demand for work or materials from the preceding station

Kanban is the Japanese word meaning “signal” or “visible record”

Paperless production control system

Authority to pull, or produce comes from a downstream process.

13-23

Kanban FormulaKanban Formula

N = DT(1+X)C

N = Total number of containers

D = Planned usage rate of using work center

T = Average waiting time for replenishment of parts plus average production time for a container of parts

X = Policy variable set by management - possible inefficiency in the system

C = Capacity of a standard container

13-24

Limited Work in ProcessLimited Work in Process

Benefits Lower carrying costs Increased flexibility Aids scheduling Saves cost of rework and scrap

Two general approaches Kanban – focuses on individual work stations Constant work in process (CONWIP) – focuses

on the system as a whole

13-25

Traditional Supplier NetworkTraditional Supplier Network

BuyerBuyer

SupplierSupplierSupplierSupplier SupplierSupplier SupplierSupplier

SupplierSupplier

SupplierSupplierSupplierSupplier

Figure 13.4a

13-26

Tiered Supplier NetworkTiered Supplier NetworkFigure 13.4b

SupplierSupplier

SupplierSupplier

SupplierSupplier

SupplierSupplierSupplierSupplier SupplierSupplier

BuyerBuyer

SupplierSupplierFirst Tier SupplierFirst Tier Supplier

Second Tier SupplierSecond Tier Supplier

Third Tier SupplierThird Tier Supplier

13-27

Preventive Maintenance andPreventive Maintenance andHousekeepingHousekeeping

Preventative maintenance: Maintaining equipment in good condition and replacing parts that have a tendency to fail before they actually fail.

Housekeeping: Maintaining a workplace that is clean and free of unnecessary materials.

13-28

Housekeeping Five S’sHousekeeping Five S’s

1. Sort

2. Straighten

3. Sweep

4. Standardize

5. Self-discipline

13-29

Comparison of JIT and Comparison of JIT and TraditionalTraditional

Factor Traditional JIT

Inventory Much to offset forecast errors, late deliveries

Minimal necessary to operate

Deliveries Few, large Many, small

Lot sizes Large Small

Setup; runs Few, long runs Many, short runs

Vendors Long-term relationships are unusual

Partners

Workers Necessary to do the work Assets

Table 13.3

13-30

Transitioning to a JIT SystemTransitioning to a JIT System

Get top management commitment

Decide which parts need most effort

Obtain support of workers

Start by trying to reduce setup times

Gradually convert operations

Convert suppliers to JIT

Prepare for obstacles

13-31

Obstacles to ConversionObstacles to Conversion

Management may not be committed

Workers/management may not be cooperative

Difficult to change company culture

Suppliers may resist Why?

13-32

Suppliers May Resist JITSuppliers May Resist JIT

Unwilling to commit resources Uneasy about long-term commitments Frequent, small deliveries may be difficult Burden of quality control shifts to supplier Frequent engineering changes may cause

JIT changes

13-33

JIT in ServicesJIT in Services

The basic goal of the demand flow technology in the service organization is to provide optimum response to the customer with the highest quality service and lowest possible cost. Eliminate disruptions Make system flexible Reduce setup and lead times Eliminate waste Minimize WIP Simplify the process

13-34

JIT II: a supplier representative works right in the company’s plant, making sure there is an appropriate supply on hand.

JIT IIJIT II

13-35

Benefits of JIT SystemsBenefits of JIT Systems

Reduced inventory levels

High quality

Flexibility

Reduced lead times

Increased productivity

13-36

Benefits of JIT Systems (cont’d)Benefits of JIT Systems (cont’d)

Increased equipment utilization

Reduced scrap and rework

Reduced space requirements

Pressure for good vendor relationships

Reduced need for indirect labor

13-37

Smooth flow of work (the ultimate goal) Elimination of waste Continuous improvement Eliminating anything that does not add

value Simple systems that are easy to

manage Use of product layouts to minimize

moving materials and parts Quality at the source

Elements of JITElements of JITTable 13.4

13-38

Poka-yoke – fail safe tools and methods Preventative maintenance Good housekeeping Set-up time reduction

Cross-trained employees

A pull system

Elements of JIT (cont’d)Elements of JIT (cont’d)Table 13.4