13. building works_repairs to building

8/12/2019 13. Building Works_repairs to Building

1/9

SH:13/REPAIRS TO BUILDING

Code No. Description Unit Rate

13.1 Repairs to plaster of thickness 12 mm to 20 mm in

patches of area 2.5 sqm and under including cutting the

patch in proper shape and preparing and plastering thesurface of the walls complete including disposal of

rubbish to the dumping ground with all leads and lifts

including finishing even and smooth and curing complete

as per direction of the Engineer in charge:-

13.1.1 With cement mortar 1:3 ( 1 cement : 3 fine sand ). Sqm. R 136.40



13.1.4 With cement mortar 1:6 ( 1 cement : 6 fine sand ).

Sqm.R 80.90

13.2 Fixing chowkhats in existing opening including

embedding chowkhats in floors or walls, cutting masonry

/ RCC / CC for hold fasts, embedding hold fasts in

cement concrete blocks with cement concrete 1 : 3 : 6 ( 1

cement : 3 fine sand : 6 graded well burnt brick aggregate

20 mm nominal size ) painting two coats of coal tar to

sides of chowkhats and making good the damages to

walls and floors as required including disposal of rubbish

to the dumping ground with all leads and lifts complete

as per direction of the Engineer in charge:-

13.2.1 Door chowkhats. Each R 597.00

13.2.2 Window chowkhats. Each R 404.70

13.2.3 Clerestory Window chowkhats. Each R 262.70

13.3 Making the opening in brick masonry including

dismantling, fixing chowkhats in floors or walls, cutting

masonry / RCC / CC for hold fasts, embedding hold fasts

in cement concrete blocks with cement concrete 1 : 3 : 6 (

1 cement : 3 fine sand : 6 graded well burnt brickaggregate 20 mm nominal size ) painting two coats of

coal tar to sides of chowkhats and making good the

damages to walls and floors as required to match the

existing surface including disposal of rubbish to the

dumping ground with all leads and lifts complete as per

direction of the Engineer in charge:-

13.3.1 Door chowkhats. Each R 668.10

SUB HEAD : 13.0REPAIRS TO BUILDING

\\vboxsrv\conversion_tmp\scratch_2\218140930.xls.ms_office/Schedule SH:13.0-Page:4


2/9



13.3.2 Window chowkhats. Each R 463.80

13.3.3 Clerestory Window chowkhats. Each R 278.00

13.4 Renewing glass panes with putty and nails wherever

necessary, including painting or varnishing or bees

waxing as required to match the existing surfaceincluding disposal of broken glass panes and other

damaged materials to the dumping ground with all leads

and lifts complete as per direction of the Engineer in

charge:-

13.4.1 Glass panes of 3 mm thick ( 7.5 kg / sqm ). Sqm. R 463.70


13.4.3 Glass panes of 5.5 mm thick ( 13.50 kg / sqm ). Sqm. R 657.90

13.4.4 Frosted glass panes of 3 mm thick ( 7.5 kg / sqm ). Sqm. R 496.10

13.5 Renewing glass panes with existing wooden fillets or new

wooden fillets ( payment for new wooden fillets should

be made separately ), including painting or varnishing or

bees waxing as required to match the existing surface

including disposal of broken glass panes and other

damaged materials to the dumping ground with all leads


charge:-



13.5.3 Glass panes of 5.5 mm thick ( 13.50 kg / sqm ). Sqm. R 672.50

13.5.4 Frosted glass panes of 3 mm thick ( 7.5 kg / sqm ). Sqm. R 507.40

13.6 Providing and fitting fixing new wooden fillets including

painting as required to match the existing surface

including disposal of damaged wooden fillets to the

dumping ground with all leads and lifts complete as per


13.6.1 Local teak wood fillets. Metre R 12.1013.6.2 Gamair wood fillets. Metre R 12.50

13.6.3 Soft wood fillets Metre R 9.80

13.7 Renewal of old putty of glass panes including painting as

required to match the existing surface including disposal

of damaged putty to the dumping ground with all leads


charge.

Metre R 9.60



3/9



13.8 Refixing of old glass panes with putty & nails including

painting as required to match the existing surface

including disposal of damaged putty etc. to the dumping

ground with all leads and lifts complete as per direction

of the Engineer in charge.

Sqm. R 115.90

13.9 Refixing of old glass panes with existing / new wooden

fillets ( excluding cost of new fillets) including painting as

required to match the existing surface including disposal

of damaged putty / fillets etc. to the dumping ground

with all leads and lifts complete as per direction of the

Engineer in charge.

Sqm. R 107.40

13.10 Providing and fixing 16 mm dia M.S. fan clamps of

standard shape and size in existing RCC slab including

cutting chase and making good and painting exposedportion of the clamps as required including disposal of

rubbish etc. to the dumping ground with all leads and

lifts complete as per direction of the Engineer in charge.

Each R 102.40

13.11 Renewing wooden battens in roofs, including making

good the holes in wall and painting with oil type wood

preservative of approved brand and manufacture as

required including removal of rubbish to the dumping


of the Engineer in charge:-

13.11.1 Sal wood. Cum. R 33007.30

13.11.2 Karai wood. Cum. R 19890.70

13.11.3 Soft wood. Cum. R 16368.90

13.12 Renewing wooden beams in roofs, including making good

the holes in wall and painting with oil type wood

preservative of approved brand and manufacture as

required including removal of rubbish to the dumping


of the Engineer in charge:-

13.12.1 Not exceeding 4.0 metre in length:-

13.12.1.1 Sal wood. Cum. R 35366.90

13.12.1.2 Karai wood. Cum. R 31389.50

13.12.2 Above 4.0 m and upto 5.0 m in length:-

13.12.2.1 Sal wood. Cum. R 34852.70

13.12.2.2 Karai wood. Cum. R 30825.80



4/9



13.13 Fixing of old wind tie with new fittings including painting

two or or more coats with anticorrosive bitumastic paint

of approved brand and manufacture over and including

priming coat of zinc chromate yellow primer of approved

brand and manufacture as required complete as per

direction of the Engineer in charge.

Metre R 49.30

13.14 Renewing bottom rail and / or top runner of collapsible

gate including making good all damages and applying

priming coat of zinc chromate yellow primer of approved

brand and manufacture as required including removal of

rubbish to the dumping ground with all leads and lifts

complete as per direction of the Engineer in charge.

Kg. R 184.10

13.15 Dismantling rolling shutters with all accessories and

stacking properly and refitting the same after oiling andgreasing the same with necessary cement concrete for

fitting fixing of hold fasts etc. for all lifts and upto a lead

of 50 m as required complete as per direction of the

Engineer in charge.

Sqm. R 274.20

13.16 Providing and applying cement slurry on old CC / RCC /

Brick works in joints to receive new and fresh CC / RCC /

Brick works including roughening and cleaning the old

surface as required complete as per direction of the

Engineer in charge.

Sqm. R 43.10

13.17 White washing with lime to give an even shade on old

work as required complete as per direction of the

Engineer in charge.

13.17.1 one or more coat. Sqm. R 2.90

13.17.2 two or more coat. Sqm. R 4.00

13.18 White washing with whiting to give an even shade on old

work as required complete as per direction of the

Engineer in charge:-

13.18.1 one or more coat. Sqm. R 3.30

13.18.2 two or more coat. Sqm. R 4.60

13.19 Removing White / colour wash by steel wire brushing,

scrapping and sand papering and preparing the surface

smooth including repairs to scratches etc. as required

complete as per direction of the Engineer in charge.Sqm. R 3.90



5/9



13.20 Colour washing such as green, blue or buff ( one or more

coat ) to give an even shade on old work as required

complete as per direction of the Engineer in charge:-

13.20.1 With white lime. Sqm. R 4.70

13.20.2 With whiting. Sqm. R 4.75

13.21 Distempering with dry distemper of approved brand and

manufacture and of required shade on old work ( one or

more coats ), to give an even shade as required complete

as per direction of the Engineer in charge.Sqm. R 15.10

13.22 Distempering with oil bound washable distemper of

approved brand and manufacture and of required shade

on old work ( one or more coats ), to give an even shade

as required complete as per direction of the Engineer incharge.

Sqm. R 17.60

13.23 Distempering with 1st quality acrylic washable

distemper of approved brand and manufacture and of

required shade on old work ( one or more coats ) to give

an even shade as required complete as per direction of

the Engineer in charge.

Sqm. R 15.60

13.24 Removing dry / oil bound distemper by scrapping, sand

papering and preparing the surface smooth & repairs to

scratches etc. as required. Sqm.R 5.10

13.25 Finishing walls with water proofing cement paint of

required shade of approved brand and manufacture on

old work ( one or more coats ) including preparation of


Engineer in charge.

Sqm. R 25.10

13.26 Finishing walls with textured exterior paint of required

shade of approved brand and manufacture on old work (

one or more coats ) including preparation of surface asrequired complete as per direction of the Engineer in

charge.

Sqm. R 69.10



6/9



13.27 Finishing walls with acrylic smooth exterior paint of

required shade of approved brand and manufacture on

old work ( one or more coats ) including preparation of


Engineer in charge.

Sqm. R 31.50

13.28 Finishing walls with premium acrylic smooth exterior

paint of required shade of approved brand and

manufacture on old work ( one or more coats ) including

preparation of surface as required complete as per


Sqm. R 39.50

13.29 Painting one thin coat with white lead of approved brand

and manufacture on wet or patchy portion of plastered

surface on old work including preparation of surface as

required complete as per direction of the Engineer in

charge.

Sqm. R 29.10

13.30 Finishing with epoxy paint ( one or more coats ) of

approved brand and manufacture at all locations

prepared and applied as per manufacturer's specification

on old work including preparation of surface etc. as

required complete as per direction of the Engineer in

charge:-

13.30.1 On steel work. Sqm. R 49.00

13.30.2 On concrete work. Sqm. R 49.80

13.31 Painting on G.S. sheet with synthetic enamel paint ( one

or more coats ) of approved brand and manufacture of

required colour to give an even shade on old work

including preparation of surface as required complete as

per direction of the Engineer in charge:-

Sqm. R 23.80

13.32 Painting on rain water, soil, waste and vent pipes and

fittings with black anticorrosive bitumastic paint ( one or

more coats ) of approved brand and manufacture to give

an even shade on old work including preparation of

surface as required complete as per direction of theEngineer in charge:-

13.32.1 50 mm dia. Metre R 7.50

13.32.2 75 mm dia. Metre R 10.00

13.32.3 100 mm dia. Metre R 13.10

13.32.4 150 mm dia. Metre R 20.10



7/9



13.33 Painting on rain water, soil, waste and vent pipes and

fittings with synthetic enamel paint ( one or more coats )

of required colour of approved brand and manufacture to

give an even shade on old work over and including



13.33.1 50 mm dia. Metre R 8.30

13.33.2 75 mm dia. Metre R 11.10

13.33.3 100 mm dia. Metre R 14.70

13.33.4 150 mm dia. Metre R 20.30

13.34 Painting on wood work with oil type wood preservative (

one or more coats ) of approved brand and manufacture

on old work including preparation of surface as required

complete as per direction of the Engineer in charge.Sqm. R 15.90

13.35 Providing and applying fire retardant paint unthinned on

cleaned wood / ply surface ( one or more coats ) of

required colour of approved brand and manufacture on

old work including preparation of surface as per

recommendation of the manufacturer to make the

surface fire returdant and as required complete as per


Sqm. R 189.80

13.36 Coal tarring ( one or more coats ) of approved brand andmanufacture on old work @ 0.16 litre coal tar per sqm


per direction of the Engineer in charge.Sqm. R 16.80

13.37 Wall painting with plastic emulsion paint (one or more

coats ) of required colour of approved brand and

manufacture on old work to give an even shade including



Sqm. R 37.60

13.38 Painting with enamel paint ( one or more coats ) of

required colour of approved brand and manufacture on

old work to give an even shade including preparation of


Engineer in charge.

Sqm. R 22.40



8/9



13.39 Painting with synthetic enamel paint ( one or more coats )

of required colour of approved brand and manufacture

on old work to give an even shade including preparation

of surface as required complete as per direction of the

Engineer in charge.

Sqm. R 27.70

13.40 Painting with aluminium paint (one or more coats ) of

approved brand and manufacture on old work to give an

even shade including preparation of surface as required


Sqm. R 21.20

13.41 Painting with acid proof paint ( one or more coats ) of

approved brand and manufacture of required colour on



Engineer in charge.

Sqm. R 25.60

13.42 Painting with black anticorrosive bitumastic paint ( one

or more coats ) of approved brand and manufacture on



Engineer in charge.

Sqm. R 19.60

13.43 Floor painting with floor enamel paint ( one or more

coats ) of approved brand and manufacture of required

colour on old work to give an even shade including

preparation of surface as required complete as perdirection of the Engineer in charge.

Sqm. R 27.30

13.44 Varnishing with varnish ( one or more coats of glue

sizing ) of approved brand and manufacture on old work


per direction of the Engineer in charge:-

13.44.1 With copal varnish. Sqm. R 33.30

13.44.2 With spar varnish. Sqm. R 33.30

13.45 French spirit polishing ( one or more coats of glue sizing )

on old work including preparation of surface clean, dirt

and dust free, sand papered smooth as required


Sqm. R 51.00



9/9



13.46 Polishing on wood work with readymade wax polish (

two or more coats ) of approved brand and manufacture

on old work including preparation of surface as required


Sqm. R 22.10

13.47 Floor polishing on masonry / concrete floors withreadymade wax polish ( two or more coats ) of approved

brand and manufacture on old work including



Sqm. R 9.40

13.48 Re-lettering with black japan paint of approved brand

and manufacture on old work as required complete as

per direction of the Engineer-in-charge.

Letter

per Cm

height

R 0.60

13.49 Painting ( one or more coat ) with black japan paint of

approved brand and manufacture on old work to give an

even shade as required complete as per direction of the

Engineer in charge.

Sqm. R 24.40

13.50 Renewing of wooden cleats to doors, windows etc. with

new cleat and bright finished MS butt hinges with

necessary screws incuding painting to match the existing

shade and colour including removal and disposal of old

cleats as required complete as per direction of the

Engineer in charge:-

13.50.1 Local teak wood. Each R 24.60

13.50.2 Gamair wood. Each R 25.80

13.50.3 Soft wood. Each R 17.10

\\vboxsrv\conversion tmp\scratch 2\218140930.xls.ms office/Schedule SH:13.0-Page:12

13. building works_repairs to building

Documents