K U B O TA D I E S E L T R A C T O R

M

R

High clearance, more speeds and robust M-series tractor features to meet your expectations.

Mudder TractorM96SHDM

The mudder tractor engineered with hto enhance performance in harvestin

Kubota Diesel EnginePut the M96SHDM into gear and you’ll immediately feel the power of this 95 net horsepower engine. You’ll notice it in all applications, but especially when pulling heavy loads. The M96SHDM’s engine also boasts an output of 84 PTO horsepower, low fuel consumption, and Kubota reliability.

Instrument Panel With LCD ReadoutThe new instrument panel makes viewing the vital functions of the tractor clear and easy. The LCD readout displays travel speed, PTO revolutions and hour meter information digitally. Illuminated analog indicators include a large tachometer, temperature gauge and fuel gauge. A battery warning light helps prevent surprise battery failures, and indicator lights show 4WD engagement, PTO and oil pressure indications.

Slanted Full-open HoodThe slant-nosed, full-open hood design makes maintenance easier. The one-piece hood’s dual-gas-shock assist makes it easy to lift.

Tire Options To enable the M96SHDM to perform at its best, we offer 13.6-38 Bias R1, 9.5 R48, and 12.4 R46 R1W Radial tires as options.

■Ground ClearanceBy using a rear drop axle and same size, large diameter tires, the front axle clearance is 30.3 in. (770 mm), giving you ample clearance to help lessen potential crop damage. Tire tread options range from narrow (61.6 in.) to wide (79.7 in.), with three more tread variations in between.

30.3 in.(770 mm)

Min tread (standard) 60 in. Max tread (optional) 80 in.64 in., 72 in. and 76 in. are also available

high clearance and more speeds ng applications.

3-point HitchThe Category II 3-point hitch accepts a variety of rear-mounted implements. The hitch's telescopic stabilizers and lower link ends simplify hook-up and adjustments. The hitch has a capacity of 4630 lbs. (2100 kg). Optional dual assist cylinders raise the capacity to 7490 lbs. (3400 kg).

Hydraulic Independent PTO The hydraulic PTO clutch allows you to engage the implement drive system smoothly, which helps reduce operator fatigue. And because the PTO is independent, you don’t have to stop the tractor to engage or disengage the PTO, saving you time when operating implements.

■ Swing Shift With Creep"Swing Shift" with creep speeds give you access to a total of 24 speeds! The synchronized main shift's "H" pattern provides the first 4 speeds. Swing Shift adds four more speeds by actuating the electric-over-hydraulic high/low synchronized range shift, giving you access to a total of 8 speeds, all controlled by a single lever. If a task requires more than 8 speeds, move the auxiliary range lever on the left of the seat to gain access to 16 more speeds, including 8 creep speeds.

Hydraulic Shuttle ShiftMounted to the left of the steering column, the shuttle lever’s fingertip control makes it possible to shift smoothly from forward to reverse without using the clutch or stopping the tractor.

Multiple Wet-disc Main ClutchOur multiple wet-disc main clutch operates smoothly and reliably and offers greater durability.

R e v e r s e

F o r w a r d

Shuttleshift lever

Range gearshift lever

Main gearshift lever 105 15 mph(km/h)

C r e e p

L o w

H i g h

C r e e p

L o w

H i g h

Traveling speed at rated engine RPM: M96SHDM (with 13.6--38 rear tire)

1 0.12 (0.19)

0.12 (0.19)0.15 (0.24)0.19 (0.30)0.23 (0.37)0.29 (0.47)0.37 (0.60)0.46 (0.74)0.56 (0.91)

0.67 (1.07)0.85 (1.36)

1.04 (1.68)1.28 (2.06)

1.64 (2.63)2.08 (3.35)

2.57 (4.13)3.15 (5.06)

3.35 (5.38)

5.25 (8.45)6.43 (10.35)

8.23 (13.25)10.48 (16.87)

12.91 (20.78)15.83 (25.47)

0.15 (0.24)0.19 (0.30)0.23 (0.37)0.29 (0.47)0.37 (0.60)0.46 (0.73)0.56 (0.90)

0.66 (1.06)0.84 (1.35)

1.03 (1.67)1.27 (2.04)

1.62 (2.61)2.07 (3.33)

2.55 (4.10)3.12 (5.02)

3.32 (5.34)

5.20 (8.37)6.38 (10.26)

8.16 (13.13)10.39 (16.73)

12.80 (20.60)15.69 (25.26)

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

4.22 (6.80)

4.26 (6.86)

(Shown with optional Drawbar Clevis)

*1) Fuel tank stay *2) 4WD engaged @80” treadThe company reserves the right to change the above specifications without notice. This brochure is for descriptive purposes only. Please contact your local Kubota dealer for warranty information. For your safety, Kubota strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt in almost all applications. For complete operational information, the operator's manual should be consulted. Not for sale in Nebraska.

Specifications

©2010 Kubota Corporation

KUBOTA CANADA LTD.Head Office: 5900 14th Avenue, Markham, Ontario L3S 4K4 TEL: (905) 294-7477 FAX: (905) 294-6651Delta Distribution Centre: 7979 82nd Street, Delta, B.C. V4G 1L7 TEL: (604) 940-6061 FAX: (604) 940-6067Drummondville Distribution Office: 5705 Place Kubota, Drummondville, PQ, J2B 6V4 TEL: (819) 478-7151 FAX: (819) 478-7836

Visit our web site at: www.kubota.ca

Cat.No.0000-00-COM Printed in Japan.D.REX.'10-000.

Center direct injection (E-CDIS), liquid cooled 4 cylinder diesel

Turbocharged

2600

84 (62.7)

46.2 (175)

45 Amp, 80 Amp: Opt.

Dry, dual-element

8/Fully synchronized (with swing shift)

3-speeds

Steering column-mounted lever

Hydraulic independent PTO with PTO brake, wet discs

Telescopic lower link ends, Telescopic stabilizer

II

1 standard (2nd, 3rd & flow control valve optional)

540 rpm (540/1000 rpm optional)

Model

Engine

Transmission

Type

V3800-DI-TE3Model (Make: KUBOTA)

rpm

HP(kW)

Cu in. ( )

Fuel tank capacity gal. ( )

Aspiration

Rated speed

95 (70.9)HP(kW)Engine net power

PTO power

Total displacement

Air Cleaner

Alternator Amp

Main gear shift

in. (mm)

gpm ( /min.)

Hydraulic-shuttle

Range shift

Main clutch type/Brake type

Mechanical differential lock

PTO

Hydraulics

Other features

Dimensions & weight

Type

Speed

Pump capacity (3-Point Hitch)

3-Point Hitch

in. (mm)

in. (mm)

in. (mm)

in. (mm)

in. (mm)

Overall width (minimum tread)

Category

Control system

No. of standard remote valves

Overall length

Overall height

in. (mm)Wheelbase

Front axle clearance

Tread width Front

Rear

111.6 (2835)

30.3 (770)

61.6-65.6 (1565-1665)［ 72.0-79.7 (1830-2025) with 80" tread spacer ］60.8-64.8 (1545-1645)［ 73.4-81.1 (1865-2060) with 80" tread spacer ］

4WD drive system

Steering

Hood type

Deck type / Pedal type

Bevel gear type

Hydrostatic power steering

Single piece full open hood, twin gas shock assist

Standard tire size Front/Rear

Optional tire size

13.6-38/13.6-38

9.5R48/9.5R48 , 12.4R46/12.4R46

ISO-mounted full flat deck with rubber mat/ hanging pedal

Number of F/R speedsTransmission

M96SHDM

230 (3.8)

Front & Rear

24F/24R (with creep)

79.9 (2030)

168.3 (4275)

95.3 (2420)

in. (mm)Minimum crop clearance 27.3 (693)*1)

ft. (m)Turning radius (w/o brake) 17.1 (5.2)*2)

lb. (kg)Tractor weight 7948 (3605)

Hydraulic wet discs/Hydraulic wet discs

Position, draft (top link sensing) & mix control

Lift capacity at 24 in. behind lift point lbs. (kgf) 4630(2100),7490(3400) w/dual assist cylinder (optional)

17.2 (65)