13ade2 brochure
TRANSCRIPT
Collision Avoidance and Well Interceptions – “Hits and Misses”
Technical Program Committee
WORKSHOP6-8 November 2013 | The Brown Palace | Denver, CO, USA
The discipline of wellbore positioning in the oil and gas industry was born as a way to manage corporate risk. While a portion of this risk is economic, the process risk of a wellbore collision and subsequent well-control event make wellbore positioning a safety-critical activity. Planning to ensure that unintended well collisions do not occur during drilling requires a sound management plan for wellbore positioning technologies and techniques.
The potential for well collisions, and the need for interceptions is rising due to:• Drilling more complex-shaped wells in increasingly dense fields, often with less experienced crews• Potentially catastrophic consequences from an uncontrolled well flow event that mandates competently intercepting a blowout
well• Legislature that requires well abandonment often necessitates subsequent subsurface interception to complete the work
Also, well proximity control and well interceptions are used to develop new architecture for improved reservoir drainage such as system assisted gravity drainage (SAGD). In addition, understanding the full cycle of well-positioning activities with improved policies, planning, and data management reduces uncertainty of downhole locations, leading to improved reserve evaluations.
Cochairpersons John Wright
Bearco International
Pete Clark Chevron
William Allen BP
Steve Grindrod Copsegrove Developments Ltd.
Ben Hawkinson Scientific Drilling
International
Angus Jamieson University of the Highlands
and Islands
Carol Mann Dynamic Graphics, Inc.
Steve Mullin Gyrodata Inc.
Benny Poedjono Schlumberger
John de Wardt De WarDt anD Company
Robert Wylie National Oilwell Varco
SPE Workshop Technical Program
Receptions
Corporate sponsor
Lunches
Collision Avoidance and Well Interceptions – “Hits and Misses”
Find out more at
slb.com/iPZIG
iPZIG is a mark of Schlumberger. © 2013 Schlumberger. 13-PF-0089
iPZIG service—the industry’s first gamma ray imaging and inclination service positioned directly behind the drill bit—acquires real-time measurements to reduce directional drilling risk in critical hole sections. With imaging data retrieved at the bit, geosteering can be adjusted immediately to stay within the target zone.
AT-BIT INCLINATION, GAMMA RAY, AND IMAGING SERVICE
iPZIG
Real-time, at-bit data for time-critical geosteering decisions.
General Information:Accessibility: Our events and functions are accessible to all attendees with wheelchairs. If you require special arrangements, please contact our staff at the registration desk.
Alcohol Policy: SPE recognizes the legitimate serving of alco-holic beverages in the process of conducting business and social activities. We also recognize that the use and consumption of al-cohol carries with it the requirement for all attendees to consume those beverages responsibly.
Commercialism: In remaining consistent with workshop objec-tives and SPE guidelines, commercialism in presentations will not be permitted. Company logos should be used only to indicate the affiliation of the presenter(s).
Continuing Education Units: Attendees will receive 2.0 CEUs.
One CEU equals 10 contact hours of participation. CEUs will be awarded through SPE Professional Development for participation and completion of SPE workshop. A permanent record of a participant’s involvement and awarding of CEUs will be maintained by SPE.
Documentation: The workshop series online community will contain released copies of the workshop presentations.
Electronic Devices: As a courtesy to the speakers and your fellow registrants, please turn off all electronic devices during presentations.
Name Badges: Please wear your badge at all times. It is a cour-tesy to your fellow registrants, speakers and sponsors.
Photography Policy: SPE reserves the exclusive rights to all re-cording or reproductions of the workshop. Unauthorized recording is expressly prohibited, whether by video, still or digital camera, mobile phone, or any other means or form of reproduction.
Any person attending may be photographed or videotaped, and by your attendance, you give permission to use your image in possible future marketing publications including print, online, and video.
Workshop Format: Workshops maximize the exchange of ideas among attendees and presenters through brief technical presen-tations followed by extended Q&A periods. Focused topics attract an informed audience eager to discuss issues critical to advanc-ing both technology and best practices.
Many of the presentations are in the form of case studies, highlighting engineering achievements and lessons learned. In order to stimulate frank discussion, no proceedings are published and members of the press are not invited to attend.
6-8 November 2013 | The Brown Palace | Denver, CO, USA
Schedule at a Glance:Tuesday, 5 November 1730-1900 Welcome Reception Brown Palace Club
All technical sessions are located in Ballroom A
Wednesday, 6 November 0700-0800 Registration and Continental Breakfast Foyer
0800-0900 Welcome Keynote
0900-1000 Session I: Survey Database Integrity
1000-1030 Coffee Break Foyer
1030-1200 Session I: Survey Database Integrity (Continued)
1200-1330 Lunch Ballroom B
1330-1500 Session II: Collision Avoidance Management
1500-1530 Coffee Break Foyer
1530-1700 Session II: Collision Avoidance Management (Continued)
1700-1830 Reception Central City
Thursday, 7 November0700-0800 Continental Breakfast Foyer
0800-0930 Session III: Practical Directional Drilling
0930-1000 Coffee Break Foyer
1000-1130 Session III: Practical Directional Drilling (Continued)
1000-1045 Breakout Session
1045-1130 Review Breakout Results
1130-1300 Lunch Ballroom B
1300-1430 Session IV: Relief Well Design
1430-1500 Coffee Break Foyer
1500-1700 Session IV: Relief Well Design (Continued)
Friday, 8 November0700-0800 Continental Breakfast Foyer
0800-0900 Session V: Interception Techniques
0900-1100 Breakout Session
1100-1200 Review Breakout Results and Wrap-Up
Collision Avoidance and Well Interceptions – “Hits and Misses”
Tuesday, 5 November 1730-1900 Welcome Reception
Wednesday, 6 November 0700-0800 Registration and Continental Breakfast
0800-0900 Welcome Keynote John Wright, Bearco International
0900-1000 Session I: Survey Database Integrity Chairs: John de Wardt, De Wardt and Company
Carol Mann, Dynamic Graphics, Inc.
Presentation 1: Directional Database Defined Jerry Codling, Landmark Software & Services, Halliburton
Presentation 2: Managing Directional Survey Data Mike Terpening, Schlumberger
1000-1030 Coffee Break
1030-1200 Session I: Survey Database Integrity (Continued) Presentation 3: Data Quality 101 and Directional Surveys Rusty Foreman, BP
Panel Discussion
1200-1330 Lunch
1330-1500 Session II: Collision Avoidance Management Chairs: Pete Clark, Chevron
Steve Mullin, Gyrodata Inc.
Presentation 1: The Importance of a Survey Program Mike Long, Baker Hughes
Exercise: Developing a Survey Program Facilitators: Pete Clark, Chevron; Mike Long, Baker Hughes; Steve Mullin, Gyrodata Inc.
Presentation 2: Positional Uncertainty and Collision Avoidance Pete Schiermeier, Halliburton
1500-1530 Coffee Break
1530-1700 Session II: Collision Avoidance Management (Continued) Exercise: Current Common (C-C) and Seperation Factor (SF) Calculations Plus Ranging Interval Plan Facilitators: Pete Clark, Chevron; Steve Mullin, Gyrodata Inc.; Pete Schiermeier, Halliburton
Presentation 3: Drilling and Completions Operations Management System – Policy, Roles, and Responsibilities
Roger Goobie, BP
1700-1830 Reception
6-8 November 2013 | The Brown Palace | Denver, CO, USA
Thursday, 7 November0700-0800 Continental Breakfast
0800-0930 Session III: Practical Directional Drilling Chairs: William Allen, BP
Benny Poedjono, Schlumberger
Presentation 1: Process Management Control and Consistency Robert Hillman, Halliburton
Presentation 2: Enabling Compliance and Quality Assurance Jeffrey Mohammed, Baker Hughes
Presentation 3: Role of the Directional Driller – Hit a Given Target in a Safe and Most Economical Way Possible
Benjamin Zapata, Schlumberger
0930-1000 Coffee Break
1000-1130 Session III: Practical Directional Drilling (Continued)
1000-1045 Breakout Session Participants will engage in one of four different topic groups through a detailed round table discussion.
Feedback highlights from the session will be provided to all.
1045-1130 Review Breakout Results Facilitators: Benny Poedjono, Schlumberger
Bill Allen, BP
1130-1300 Lunch
1300-1430 Session IV: Relief Well Design Chairs: Angus Jamieson, University of the Highlands and Islands
Steve Grindrod, Copsegrove Developments Ltd.
Presentation 1: Relief Well Design and Execution – Realities and Results Jim Woodruff, Bearco International
Presentation 2: Planning the Relief Well Steve Grindrod, Copesgrove Developments Ltd.
Presentation 3: Introduction to Directional Drilling Simulator Angus Jamieson, University of the Highlands and Islands
1430-1500 Coffee Break
1500-1700 Session IV: Relief Well Design (Continued) Drilling Exercise: An Opportunity to Drill a Relief Well on a PC-Based Simulator Including Steering
and Ranging.
Please bring laptops fully charged to this session.
Public Confession Lessons learned from previous drilling exercise will be discussed
Collision Avoidance and Well Interceptions – “Hits and Misses”
Friday, 8 November0700-0800 Continental Breakfast
0800-0900 Session V: Interception Techniques Chairs: Robert Wylie, National Oilwell Varco
Ben Hawkinson, Scientific Driling International
Presentation 1: Active Ranging Is Always a Hit Joe Burke, Halliburton
Presentation 2: Measurement While Drilling Ranging as a Real-Time Risk Mitigation Tool Jim Towle, Scientific Drilling International
0900-1100 Breakout Session: At each station, the facilitator will have the role of a customer with a specific scenario needing a recommended ranging technique. The group will need to recommend a solution to the problem presented.
1100-1200 Review Breakout Results and Wrap-Up Presenters: Breakout Facilitators
Posters1. Collision Avoidance in 3D Carol Mann, DGI
2. Magnetic Ranging Jim Towle, Scientific Drilling International
3. Gyro Surveying and Survey Quality Stephen Morrow, Scientific Drilling International
4. High Inclination Gas Well Deliquification (GWD) Keith Beattie, Gyrodata Inc.
5. Gyro Surveying at High Latitudes Adrian Ledroz, Gyrodata Inc.
6. Advancing Vertical Wellbore Survey Practices for the US Land Market Johnathan Wojtewicz, National Oilwell Varco
7. Case History: Knock-On Effects of a Broached Gas Blowout Beneath a Fixed Leg Platform John Wright, Bearco International
8. Pad Design Key for Marcellus Drilling Benny Poedjono, Schlumberger
9. Introduction to Borehole Surveying: An E-Book Angus Jamieson, University of the Highlands and Islands
10. Operator’s Wellbore Survey Group (OWSG) Survey Tool Error Models Son Pham, ConocoPhillips; Pete Clark, Chevron; Steve Grindrod, Copsegrove Development Ltd.
6-8 November 2013 | The Brown Palace | Denver, CO, USA
201310-12 December
Understanding Well Performance and Optimizing Completions in the Bakken Workshop
San Diego, CA, USA
201428-29 January AAPG/SPE Deepwater Reservoirs Geoscience Technology Workshop Houston, TX, USA
19-20 February Production Chemistry and Chemical Systems Workshop Austin, TX, USA
23-28 February Numerical Modeling in Unconventional Reservoirs Forum Newport Beach, CA, USA
11-12 March SPE/AAPG/SEG Pore Pressure Workshop San Antonio, TX, USA
17-18 March Worst Case Discharge Summit New Orleans, LA, USA
NORTH AMERICA WORKSHOPS and FORUMS
C
M
Y
CM
MY
CY
CMY
K
Drilling Contractor_June2013_PRINT.pdf 1 6/19/2013 2:08:21 PM