Fab academy 2012

MECHANICAL DESIGN (Apr 18) STUDENT: WALTER HECTOR GONZALES ARNAO

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy

summary This week was held the election of the theme to work. AND WAS THE MTM (MACHINE MACHINE TO MAKE SNAP). THAT BROUGHT THE CREATORS OF THE MTM (NADYA AND JHONATAN), IN WHICH LEFT INCOMPLETE FAB 7. THAT TIME IS WITH OXIDE http://mtm.cba.mit.edu/machines/mtm_snap-lock/ CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy

FIRST STEP. An inventory of the parts of MTM, the structure CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy

STEP 2. -the electronics was packaged, and agree to ordain importance -then proceeded to clean all CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy

STEP 3. -once clean. -MTM is assembled CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy

STEP 4. -the installation of shafts and guides was done carefully and accurately CLASS 13: mechanical design (Apr 18) UNIVERSIDAD NACIONAL DE INGENIERÍA

FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy

STEP 5. was performed twice the installation of the axles.. Failure in armed CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy

STEP 6. - testing was performed moving parts CLASS 13: mechanical design (Apr 18) UNIVERSIDAD NACIONAL DE INGENIERÍA

FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy 2012 STEP 7.

-was calibrated parties that support the moving parts CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy 2012 STEP 8.

was placed on the workpiece motor Cell CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy 2012 STEP 9.

-will place the last piece CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy 2012

STEP 10. because is employed tools they need experience CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy 2012 STEP 11.

-proceeds has to verify that all parts are complete to complete the assemblyPUSH CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Fab academy 2012 STEP 12.

-support were manufactured engines 1, 2 and 3 -Diego was manufactured in acrylic CLASS 13: mechanical design (Apr 18) UNIVERSIDAD NACIONAL DE INGENIERÍA

FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

part 1

part 2

part 3

Fab academy 2012

STEP 13. MTM shows the armed CLASS 13: mechanical design (Apr 18)

UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES

Conclusions. 1. coordinate schedules between the hours of work, was difficult. 2. the assembly is difficult because of lack of parts. 3. el sistema de ensambles del MTM requiere 2 personas 4. experience has helped to know in detail this machine