1400 architura-s outdoor linear led proect ype date · led options leds deliver even diffused light...

DateProject Type

LED OptionsLEDs deliver even diffused light without LED imagesColor variation within 3 MacAdam stepsLife >50,000 hours (LM79)Standard output - 5W/ft. compare with T5 Standard lamps (29% energy saving)High output - 7.5 W/ft. compare with T5 HO lamps (44% energy saving)Extra high output - 9W/ft.

ConstructionExtruded aluminum housing. Diecast endcaps. Wire through connections optional. Slide-in polycarbonate lens. Cast swivels. Cantilever arms. All hardware is stainless steel.

LengthsAll length dimensions are nominal and actual lengths may vary.

LED5 year / 50,000 hour warranty. LM-79 and LM-80. See wattage/lumen table for full specifications.

Driver / ElectricalChoice of integral Universal Voltage (120-277V), electric driver or integral 347V electronic drivers – in either Non-Dim or 0-10v / 10% Dimming. Optional Emergency Battery Pack also available.

OpticsChoice of asymmetric, flood or grazing distribution.

MountingWall, ceiling or ground post mount. Sliding swivels; or space saving sliding bracket; Hub brackets for toolless push fit wire-thru row mounting.

FinishPolyester powder coat applied over a 5 stage pretreatment. Silver, bronze, black or white. Custom colors at added cost.

OptionsGlare Shields and external blade louvers.

CertificationsListed ETC IP65 UL 1598, CSA sprinkler location within 4 feet off the ground.

IES photometric files online at orgatech.com

Asymmetric optic

Summer 2016 www.orgatech.com

ORDERINGLUMINAIRE SERIES

Architura-S 1400Luminaire Length

2' nominal - 23' nominal - 34' nominal - 46' nominal - 68' nominal - 8

Rows: 12' nominal - 12Rows: 16' nominal - 16Rows: 20' nominal - 20Rows: 24' nominal - 24

LED Output System5W/ft (618 lm/ft) - LS

7.5W/ft (870 lm/ft) - LH9W/ft (1004 lm/ft) - LEH

Color TemperatureCRI =>90 - 2700k - 27CRI =>80 - 3000k - 30CRI =>80 - 3500k - 35CRI =>80 - 4000k - 40CRI =>80 - 5000k - 50

Voltage120V - 277V - Universal - U

347V - 3Driver

Non-Dimming - ND0-10V/10% Dimming - D1

Emergency - ESpecify manufacturer, if applicable

OpticsAsymmetric - A

(Symmetric) Flood - F15° x 60° Grazing - G

Mounting(Individual or Row Mount) Sliding Bracket - SB(Individual or Row Mount) Swivel Mount - SW

4" Extended Arm - A4up to 24" Extended Arm - A24

Permapost - PHub Bracket – Row Mount

3" Bracket (Recommend for Grazing) - HB34" Bracket - HB48" Bracket - HB8

10" Bracket - HB1012" Bracket - HB1218" Bracket - HB1824" Bracket - HB24

Custom - CUFinish

Silver - SOBlack - BL

Bronze - BZWhite - WH

Finish Color Code: ______ Custom - CUNatatorium Finish (add to end of Finish) - 2

OptionsNone - N

Glare Shield - GExternal Blade Louvers - B

1400

1400 Architura-SOutdoor Linear LED

2.75”

3”

Fixture

Actual size

2' 24"

3' 35.75"

4' 46"

6' 68"

8' 90"

12' 139"

16' 180.5"

20' 238"

24' 284.5"

IES ROAD REPORTPHOTOMETRIC FILENAME : 1400-LS-A.IES

POLAR GRAPH

108

216

324

432

1

2

Maximum Candela = 432.24 Located At Horizontal Angle = 0, Vertical Angle = 35# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (35) (Through Max. Cd.)

Specifications are correct at the time of publishing, but may be modified or improved in accordance with current electrical, safety or manufacturing methods without notification.


¼"

½" NPT x ⅞" threaded nipple

(4) 10-32 threaded hole

⅞"

1"

1¼"

¼"

1¾"

¾"

1½"

mounting plate

Wall bracket – angled up or down

30°

120°

adjustable along the length of the fixture

½" NPT Nipple

2.75"

2.835"5.75"

1400 Architura-SOutdoor Linear LED – Mounting Options

SB – Sliding Bracket (adjustable; enables close mounting)Fixture mounts to the adjustable sliding bracket at any position along the length of the fixture. Mount bracket with ¼" screws or bolts (not supplied). Use for individual fixture or for multiple fixtures mounted in a row. Individual fixtures up to 2' long can be supported by a single sliding bracket attached to the center of the fixture.

Note: Add 1/2" to each fixture length when using sliding brackets with interconnected fixture rows.

135°

135° 15°

15°

Surface or recess mounting

Wall mounting, bracket down

30°

120°

30°

120°

Wall mounting, bracket up

Swivel mount

up or down aiming

30° 30°

120° 120°

Fixture

Extended Arm Center

2' Center3' 24"4' 32"6' 48"8' 64"

Add 1/2" to each fixture length when using hub brackets with interconnected fixtures.

SW – Swivel Mount (½" NPT Nipple)Heavy duty adjustable mounting arm bracket with 1/2" NPT. Fixture mounts to swivel mount arm bracket, field adjustable along the length of the fixture. Use for individual fixture or for multiple fixtures mounted in a row. The Standard Swivel Mount bracket (SW) arm extends approximately 3". Extended arms are available from 4" (A4) up to 24" (A24), see next page. 16" weatherproof cord exits 6" from the back right end of individual fixtures with the lens in the up position. All brackets can be installed at rough-in, allowing the fixture to be attached and connected to power later.

Note: Add 1/2" to each fixture length when using Swivel Mount Brackets with interconnected fixture rows.

wire access/ power cord entry

4" to 36" extended arm(s)(48" with cantilever support)

A4 to A24 – 4" to 24" Extended ArmPower cords can be routed through arms, exiting close to the wall to connect to an adjacent J-Box or other power outlet, providing a tidy installation.



P – PermapostPerma posts provide easy at-grade installation. Includes standard 3" (SW) swivel mount bracket.

PermaPost Installation

Elevation Side View: Scale: N.T.S.

PermaPost assembly(Finish: Black)

Architura-SLED assembly

Ground line

Conduitby others

Swivel Mount(Swivel fastens to PermaPostvia 1/2” i.p. nipple)

Cup

Cap

Post with fins

Permapost

Swivel Assembly

LineGround

Neutral

Section View: Scale: N.T.S.

Accepts 1/2" I.P. threaded nipple

51/8"±

155/8"±

215/8”141/2”

2"

5" x 6" aluminummounting plate

1¾" square arm with swivel #2

Wire access holeand cover with(2) 6-32 screws

3¾"

4¾" 6"

5"

2½"

5/8"

(4) slotted mounting holesfor screws for ¼" Ø (screws not provided)

5/8"




OmegaluxLED assembly

Ground line

Conduitby others


Cup

Cap

Post with fins

Permapost

Swivel Assembly

LineGround

Neutral



51/8"±

155/8"±

215/8”141/2”




OmegaluxLED assembly

Ground line

Conduitby others


Cup

Cap

Post with fins

Permapost

Swivel Assembly

LineGround

Neutral



51/8"±

155/8"±

215/8”141/2”


Row Mounting – SB, SW, A4-A24, PP (Sliding Bracket, Swivel Mount, A4-A24 Extended Arm, Permapost)

Specifying Interconnecting fixturesTool-less, wire-thru, push fit hub connections allow individual fixture rotation during installation, solving the problem of aiming connected rows.

Note: Add 1/2" to each fixture length when using Hub Brackets with interconnected fixture rows.

Row mounting18" weatherproof cord exits 6" from the back left end of fixtures with the lens in the up position. When fixtures are inverted down aiming, the cord will be on the right. All fixtures are provided with capped liquid tight connectors allowing field modification.



End connector

Starter connector

Unit powered

Row mounting: Architura-S shown as downlightMaximum row length: 150 ft.

Row mounting: Architura-S shown as uplightMaximum row length: 150 ft.

Optional locking bracket: Secures fixtures at connecting points. 2.75" long slides into the channel and secures with two screws at the base.

For swivel mounting, locking bracket will be on the cord grip side of the fixture.

Row mountingSupplied with 18" weatherproof cord 6" from the back right with the lens facing up. For down aiming, the power cord will be on the right. Field modifiable.


HB – Hub BracketHeavy duty mounting arm with a choice of a 3" (HB3) arm extension, recommended for grazing, up to a 24" (HB24) extended arm bracket used for row mounting of multiple Architura fixtures. Consult factory for custom arm extension lengths. Brackets include locking set screws and fixture alignment brackets to secure fixtures after aiming.

Row mounted fixtures include patented tool-less, push-fit wire-through connection system. Row starter fixtures include 18" of weatherproof wire leads.

Installation of Hub Bracket on interconnected rowsMounting brackets require structural support at bracket mounting centers. We recommend that this should be at least 4"H x 4'W. Refer to table below for mounting centers.

1. Set the first bracket where you want the row to begin with the mounting screw side of the bracket outwards for access to mounting screws after installation.

2. Add ½" to the fixture length (not including the connecting hubs.) This will be the center of the next mounting arm (see length table to right).

3. Using a bracket as a template, mark the position of the mounting holes at the center of the slots. Mount the next bracket with the mounting slots outward. Repeat for each fixture length in the row.

4. Do not fully tighten the bracket mounting screws after the second bracket to enable sliding adjustment to insert the next fixture.

5. Slide the locking bracket onto each fixture before installing. Then, slide into place to connect fixtures after aiming and secure with screws.

6. Support fixtures and connect the push on power connection plugs through the Hub Bracket hole, then connect fixtures with a slight rotating motion and the tool-less precision push-fit hub system seals against moisture while enabling free rotation and aiming. The long male connector allows for open connection of up to ¼" without compromising structural strength or the wet seal.

7. Lamp install. Remove any plastic protection on the reflectors. Back off the captive screws to remove the lens retainer. Slide out the lens. Insert the lamp until it locks. Replace the lens and retainer.



Hub bracket with locking set-screw to secure fixtures after aiming.

±8”

211/16”

4 slotted mounting holesfor ¼” 0 screws (by others)

±0¼½¾10-32 threaded hole 2¼”

Hub bracket slotted for wall mounting adjustment

Aiming lock, set screw


For swivel mounting, locking bracket will be on the cord grip side of the fixture.


Row Mounting – HB (Hub Bracket)

Specifying Interconnecting fixturesTool-less, wire-thru, push fit hub connections allow individual fixture rotation during installation, solving the problem of aiming connected rows.

Note: Add 1/2" to each fixture length when using Hub Brackets with interconnected fixture rows.

Row mounting18" weatherproof cord exits 6" from the back left end of fixtures with the lens in the up position. When fixtures are inverted down aiming, the cord will be on the right. All fixtures are provided with capped liquid tight connectors allowing field modification.




End connector

Starter connector

Unit powered Row mountingSupplied with 18" weatherproof cord 6" from the back right with the lens facing up. For down aiming, the power cord will be on the right. Field modifiable.

Row mounting: Architura-S shown as downlightMaximum row length: 150 ft.

Row mounting: Architura-S shown as uplightMaximum row length: 150 ft.

DateProject Type


External Louver

Glare Shield


1400 Architura-SOutdoor Linear LED – Options

glare shield hooks into this groove

IES ROAD REPORTPHOTOMETRIC FILENAME : 1400-LEH-F.IES

POLAR GRAPH

389

777

1166

1554

1

2


Architura-S LED Flood

IES ROAD REPORTPHOTOMETRIC FILENAME : 1400-LS-A.IES

POLAR GRAPH

108

216

324

432

1

2


Architura-S LED Asymmetric

1400 architura-s outdoor linear led proect ype date · led options leds deliver even diffused light...

Documents