new 2 13 April 2015 11:13

Linux version 2.6.18-348.6.1.el5PAE (mockbuild@builder17.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue May 21 16:17:08 EDT 2013BIOS-provided physical RAM map: BIOS-e820: 0000000000010000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe70000 (usable) BIOS-e820: 00000000cfe70000 - 00000000cfe7d000 (ACPI data) BIOS-e820: 00000000cfe7d000 - 00000000cfe80000 (ACPI NVS) BIOS-e820: 00000000cfe80000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable)8064MB HIGHMEM available.896MB LOWMEM available.found SMP MP-table at 000f6510Memory for crash kernel (0x0 to 0x0) notwithin permissible rangedisabling kdumpNX (Execute Disable) protection: activeOn node 0 totalpages: 2293760 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 2064384 pages, LIFO batch:31DMI present.DMI: Supermicro X7SBi/X7SBi, BIOS 1.3a 11/03/2009Using APIC driver defaultACPI: RSDP (v002 PTLTD ) @ 0x000f64e0ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0xcfe7223fACPI: FADT (v003 INTEL 0x06040000 PTL 0x00000002) @ 0xcfe7c466ACPI: _MAR (v001 Intel OEMDMAR 0x06040000 LOHR 0x00000001) @ 0xcfe7c55aACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0xcfe7c58aACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xcfe7c5c6ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xcfe7c63aACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0xcfe7c662ACPI: ERST (v001 SMCI ERSTTBL 0x06040000 SMCI 0x00000001) @ 0xcfe7c6b2

-1-

new 2 13 April 2015 11:13

ACPI: HEST (v001 SMCI HESTTBL 0x06040000 SMCI 0x00000001) @ 0xcfe7cc42ACPI: BERT (v001 SMCI BERTTBL 0x06040000 SMCI 0x00000001) @ 0xcfe7cceaACPI: EINJ (v001 SMCI EINJTBL 0x06040000 SMCI 0x00000001) @ 0xcfe7cd1aACPI: SLIC (v001 OEMID_ OEMTABLE 0x06040000 LTP 0x00000000) @ 0xcfe7ce8aACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050228) @ 0xcfe73b76ACPI: SSDT (v001 PmRef Cpu7Tst 0x00003000 INTL 0x20050228) @ 0xcfe73ad0ACPI: SSDT (v001 PmRef Cpu6Tst 0x00003000 INTL 0x20050228) @ 0xcfe73a2aACPI: SSDT (v001 PmRef Cpu5Tst 0x00003000 INTL 0x20050228) @ 0xcfe73984ACPI: SSDT (v001 PmRef Cpu4Tst 0x00003000 INTL 0x20050228) @ 0xcfe738deACPI: SSDT (v001 PmRef Cpu3Tst 0x00003000 INTL 0x20050228) @ 0xcfe73838ACPI: SSDT (v001 PmRef Cpu2Tst 0x00003000 INTL 0x20050228) @ 0xcfe73792ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050228) @ 0xcfe736ecACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0xcfe72303ACPI: DSDT (v001 INTEL BEARLAKE 0x06040000 MSFT 0x03000001) @ 0x(null)ACPI: PM-Timer IO Port: 0x1008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 7:7 APIC version 20ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Processor #1 7:7 APIC version 20ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])IOAPIC[1]: apic_id 3, version 32, address 0xfecc0000, GSI 24-47ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 2 I/O APICsUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at d1000000 (gap:

-2-

new 2 13 April 2015 11:13

d0000000:10000000)Detected 2533.595 MHz processor.Built 1 zonelists. Total pages: 2293760Kernel command line: ro root=LABEL=/mapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)mapped IOAPIC to ffffb000 (fecc0000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0CPU 0 irqstacks, hard=c0775000 soft=c0755000PID hash table entries: 4096 (order: 12, 16384 bytes)Console: colour VGA+ 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 8305884k/9175040k available (2218k kernel code, 79796k reserved, 915k data, 232k init, 7469504k highmem)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay loop (skipped), value calculated using timer frequency.. 5067.19 BogoMIPS (lpj=2533595)Security Framework v1.0.0 initializedSELinux: Initializing.SELinux: Starting in permissive modeselinux_register_security: Registering secondary module capabilityCapability LSM initialized as secondaryMount-cache hash table entries: 512CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001monitor/mwait feature present.using mwait in idle threads.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 3072KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0008e39d 00000000 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.Checking 'hlt' instruction... OK.SMP alternatives: switching to UP codeACPI: Core revision 20060707CPU0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping 06SMP alternatives: switching to SMP codeBooting processor 1/1 eip 11000CPU 1 irqstacks, hard=c0776000 soft=c0756000

-3-

new 2 13 April 2015 11:13

Initializing CPU#1Calibrating delay using timer specific routine.. 5066.09 BogoMIPS (lpj=2533048)CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001monitor/mwait feature present.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 3072KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0008e39d 00000000 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.CPU1: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping 06Total of 2 processors activated (10133.28 BogoMIPS).ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1Using local APIC timer interrupts.checking TSC synchronization across 2 CPUs: passed.Brought up 2 CPUssizeof(vma)=88 bytessizeof(page)=32 bytessizeof(inode)=340 bytessizeof(dentry)=136 bytessizeof(ext3inode)=492 bytessizeof(buffer_head)=52 bytessizeof(skbuff)=176 bytesmigration_cost=34checking if image is initramfs... it isFreeing initrd memory: 2596k freedNET: Registered protocol family 16ACPI: bus type pci registeredPCI: Using MMCONFIGSetting up standard PCI resourcesACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: No dock devices found._OSC invalid UUID_OSC invalid revisionACPI: PCI Root Bridge [PCI0] (0000:00)pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]pci 0000:00:1a.7: reg 10: [mem 0xd0000000-0xd00003ff]pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]

-4-

new 2 13 April 2015 11:13

pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]pci 0000:00:1d.7: reg 10: [mem 0xd0001000-0xd00013ff]pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]pci 0000:00:1f.2: reg 20: [io 0x1c10-0x1c1f]pci 0000:00:1f.2: reg 24: [io 0x1c00-0x1c0f]PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2pci 0000:00:1f.3: reg 10: [mem 0xd0002000-0xd00020ff 64bit]pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f]pci 0000:00:1f.5: reg 10: [io 0x1c68-0x1c6f]pci 0000:00:1f.5: reg 14: [io 0x1c5c-0x1c5f]pci 0000:00:1f.5: reg 18: [io 0x1c60-0x1c67]pci 0000:00:1f.5: reg 1c: [io 0x1c58-0x1c5b]pci 0000:00:1f.5: reg 20: [io 0x1c30-0x1c3f]pci 0000:00:1f.5: reg 24: [io 0x1c20-0x1c2f]pci 0000:00:1f.6: reg 10: [mem 0xd0003000-0xd0003fff 64bit]PCI: PXH quirk detected, disabling MSI for SHPC devicepci 0000:01:00.1: reg 10: [mem 0xd0100000-0xd0100fff]pci 0000:00:01.0: PCI bridge to [bus 01-02]pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]pci 0000:01:00.0: PCI bridge to [bus 02-02]pci 0000:00:1c.0: PCI bridge to [bus 05-05]pci 0000:0d:00.0: reg 10: [mem 0xd0200000-0xd021ffff]pci 0000:0d:00.0: reg 18: [io 0x2000-0x201f]pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd02fffff]pci 0000:0f:00.0: reg 10: [mem 0xd0300000-0xd031ffff]pci 0000:0f:00.0: reg 18: [io 0x3000-0x301f]pci 0000:00:1c.5: PCI bridge to [bus 0f-0f]pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]pci 0000:00:1c.5: bridge window [mem 0xd0300000-0xd03fffff]pci 0000:11:03.0: reg 10: [mem 0xd8000000-0xdfffffff pref]pci 0000:11:03.0: reg 14: [io 0x4000-0x40ff]pci 0000:11:03.0: reg 18: [mem 0xd0400000-0xd040ffff]pci 0000:11:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]pci 0000:11:04.0: reg 10: [io 0x4420-0x4427]pci 0000:11:04.0: reg 14: [io 0x4414-0x4417]pci 0000:11:04.0: reg 18: [io 0x4418-0x441f]pci 0000:11:04.0: reg 1c: [io 0x4410-0x4413]pci 0000:11:04.0: reg 20: [io 0x4400-0x440f]pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff

-5-

new 2 13 April 2015 11:13

64bit pref]host bridge window [io 0x0000-0x0cf7] (ignored)host bridge window [mem 0x000a0000-0x000bffff] (ignored)host bridge window [mem 0x000cc000-0x000cffff] (ignored)host bridge window [mem 0x000d0000-0x000d3fff] (ignored)host bridge window [mem 0x000d4000-0x000d7fff] (ignored)host bridge window [mem 0x000d8000-0x000dbfff] (ignored)host bridge window [mem 0x000dc000-0x000dffff] (ignored)host bridge window [mem 0xd0000000-0xdfffffff] (ignored)host bridge window [io 0x0d00-0xfdff] (ignored)ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]_OSC invalid UUID_OSC invalid revisionACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_.PXHA._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 13 devicesusbcore: registered new driver usbfsusbcore: registered new driver hubPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportNetLabel: InitializingNetLabel: domain hash size = 128NetLabel: protocols = UNLABELED CIPSOv4NetLabel: unlabeled traffic allowed by defaultsystem 00:01: iomem range 0xfed14000-0xfed17fff has been reservedsystem 00:01: iomem range 0xe0000000-0xefffffff has been reservedsystem 00:01: iomem range 0xfef00000-0xfeffffff has been reservedpci 0000:01:00.0: PCI bridge to [bus 02-02]pci 0000:01:00.0: bridge window [io disabled]pci 0000:01:00.0: bridge window [mem disabled]pci 0000:01:00.0: bridge window [mem pref disabled]

-6-

new 2 13 April 2015 11:13

pci 0000:00:01.0: PCI bridge to [bus 01-02]pci 0000:00:01.0: bridge window [io disabled]pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]pci 0000:00:01.0: bridge window [mem pref disabled]pci 0000:00:1c.0: PCI bridge to [bus 05-05]pci 0000:00:1c.0: bridge window [io disabled]pci 0000:00:1c.0: bridge window [mem disabled]pci 0000:00:1c.0: bridge window [mem pref disabled]pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd02fffff]pci 0000:00:1c.4: bridge window [mem pref disabled]pci 0000:00:1c.5: PCI bridge to [bus 0f-0f]pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]pci 0000:00:1c.5: bridge window [mem 0xd0300000-0xd03fffff]pci 0000:00:1c.5: bridge window [mem pref disabled]pci 0000:11:03.0: BAR 6: assigned [mem 0xd0420000-0xd043ffff pref]pci 0000:00:1e.0: PCI bridge to [bus 11-11]pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169pci 0000:00:01.0: setting latency timer to 64pci 0000:01:00.0: setting latency timer to 64ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169pci 0000:00:1c.0: setting latency timer to 64ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169pci 0000:00:1c.4: setting latency timer to 64ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177pci 0000:00:1c.5: setting latency timer to 64pci 0000:00:1e.0: setting latency timer to 64NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredSimple Boot Flag at 0x36 set to 0x80apm: BIOS not found.audit: initializing netlink socket (disabled)type=2000 audit(1380785698.980:1): initializedhighmem bounce pool size: 64 pages

-7-

new 2 13 April 2015 11:13

Total HugeTLB memory allocated, 0VFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)SELinux: Registering netfilter hooksInitializing Cryptographic APIalg: No test for crc32c (crc32c-generic)ksign: Installing public key dataLoading keyring- Added public key 3159ABF57721E18D- User ID: CentOS (Kernel Module GPG key)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)Boot video device is 0000:11:03.0pcieport-driver 0000:00:01.0: setting latency timer to 64pcieport-driver 0000:00:1c.0: setting latency timer to 64pcieport-driver 0000:00:1c.4: setting latency timer to 64pcieport-driver 0000:00:1c.5: setting latency timer to 64pci_hotplug: PCI Hot Plug PCI Core version: 0.5ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]ACPI: Processor [CPU0] (supports 8 throttling states)ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]ACPI: Processor [CPU1] (supports 8 throttling states)ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu2Ist] [20060707]ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu3Ist] [20060707]ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ CPU4Ist] [20060707]ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ CPU5Ist] [20060707]ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu6Ist] [20060707]ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu7Ist] [20060707]Real Time Clock Driver v1.12acNon-volatile memory driver v1.2Linux agpgart interface v0.101 (c) Dave JonesSerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Aserial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550Abrd: module loaded

-8-

new 2 13 April 2015 11:13

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxProbing IDE interface ide0...hda: ST3250318AS, ATA DISK drivehdb: Slimtype DVD A DS8A4S, ATAPI CD/DVD-ROM driveProbing IDE interface ide1...hdc: ST3250318AS, ATA DISK driveide0 at 0x1f0-0x1f7,0x3f6 on irq 14ide1 at 0x170-0x177,0x376 on irq 15hda: max request size: 512KiBhda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63hda: cache flushes supported hda: hda1 hda2 hda3hdc: max request size: 512KiBhdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63hdc: cache flushes supported hdc: hdc1 hdc2 hdc3ide-floppy driver 0.99.newideusbcore: registered new driver hiddevusbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driverPNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micemd: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27md: bitmap version 4.39TCP bic registeredInitializing IPsec netlink socketNET: Registered protocol family 1NET: Registered protocol family 17Using IPI No-Shortcut modeACPI: (supports S0 S1 S4 S5)Initalizing network drop monitor serviceFreeing unused kernel memory: 232k freedTime: acpi_pm clocksource has been installed.Write protecting the kernel read-only data: 418kACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225ehci_hcd 0000:00:1a.7: setting latency timer to 64ehci_hcd 0000:00:1a.7: EHCI Host Controllerehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:1a.7: debug port 1

-9-

new 2 13 April 2015 11:13

ehci_hcd 0000:00:1a.7: cache line size of 32 is not supportedehci_hcd 0000:00:1a.7: irq 225, io mem 0xd0000000ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 6 ports detectedACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233ehci_hcd 0000:00:1d.7: setting latency timer to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2ehci_hcd 0000:00:1d.7: debug port 1ehci_hcd 0000:00:1d.7: cache line size of 32 is not supportedehci_hcd 0000:00:1d.7: irq 233, io mem 0xd0001000ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 6 ports detectedohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)USB Universal Host Controller Interface driver v3.0ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169uhci_hcd 0000:00:1a.0: setting latency timer to 64uhci_hcd 0000:00:1a.0: UHCI Host Controlleruhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1a.0: irq 169, io base 0x00001820usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177uhci_hcd 0000:00:1a.1: setting latency timer to 64uhci_hcd 0000:00:1a.1: UHCI Host Controlleruhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1a.1: irq 177, io base 0x00001840usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225uhci_hcd 0000:00:1a.2: setting latency timer to 64uhci_hcd 0000:00:1a.2: UHCI Host Controller

-10-

new 2 13 April 2015 11:13

uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5uhci_hcd 0000:00:1a.2: irq 225, io base 0x00001860usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233uhci_hcd 0000:00:1d.0: setting latency timer to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6uhci_hcd 0000:00:1d.0: irq 233, io base 0x00001880usb usb6: configuration #1 chosen from 1 choicehub 6-0:1.0: USB hub foundhub 6-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 50uhci_hcd 0000:00:1d.1: setting latency timer to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7uhci_hcd 0000:00:1d.1: irq 50, io base 0x000018a0usb usb7: configuration #1 chosen from 1 choicehub 7-0:1.0: USB hub foundhub 7-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225uhci_hcd 0000:00:1d.2: setting latency timer to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8uhci_hcd 0000:00:1d.2: irq 225, io base 0x000018c0usb usb8: configuration #1 chosen from 1 choicehub 8-0:1.0: USB hub foundhub 8-0:1.0: 2 ports detectedusb 6-2: new full speed USB device using uhci_hcd and address 2usb 6-2: configuration #1 chosen from 1 choiceinput: Logitech USB Receiver as /class/input/input0input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2input: Logitech USB Receiver as /class/input/input1inputhiddev96,hidraw96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2SCSI subsystem initializedlibata version 3.00 loaded.device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised:

-11-

new 2 13 April 2015 11:13

dm-devel@redhat.comdevice-mapper: dm-raid45: initialized v0.2594lkjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.SELinux: Disabled at runtime.SELinux: Unregistering netfilter hookstype=1404 audit(1380785724.339:2): selinux=0 auid=4294967295 ses=4294967295input: PC Speaker as /class/input/input2Floppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077EDAC MC: Ver: 2.0.1 May 21 2013EDAC MC0: Giving out device to i3200_edac i3200: DEV 0000:00:00.0parport: PnPBIOS parport detected.parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]ata_piix 0000:00:1f.2: version 2.12ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]ata_piix 0000:00:1f.2: 0x1F0 IDE port busyata_piix 0000:00:1f.2: 0x170 IDE port busyata_piix 0000:00:1f.2: no available legacy portACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 225ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]ata_piix 0000:00:1f.5: setting latency timer to 64scsi0 : ata_piixscsi1 : ata_piixata1: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 225ata2: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 225e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-ke1000e: Copyright(c) 1999 - 2012 Intel Corporation.hdb: ATAPI 8X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB CacheUniform CD-ROM driver Revision: 3.20ata1: SATA link down (SStatus 0 SControl 300)ata2: SATA link down (SStatus 0 SControl 300)e1000e 0000:0d:00.0: Disabling ASPM L0s L1ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 169e1000e 0000:0d:00.0: setting latency timer to 64e1000e 0000:0d:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative modee1000e 0000:0d:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:30:48:fc:87:eee1000e 0000:0d:00.0: eth0: Intel(R) PRO/1000 Network Connectione1000e 0000:0d:00.0: eth0: MAC: 2, PHY: 2, PBA No: 0100FF-0FFe1000e 0000:0f:00.0: Disabling ASPM L0s L1ACPI: PCI Interrupt 0000:0f:00.0[A] -> GSI 17 (level, low) -> IRQ

-12-

new 2 13 April 2015 11:13

177e1000e 0000:0f:00.0: setting latency timer to 64e1000e 0000:0f:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative modee1000e 0000:0f:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:30:48:fc:87:efe1000e 0000:0f:00.0: eth1: Intel(R) PRO/1000 Network Connectione1000e 0000:0f:00.0: eth1: MAC: 2, PHY: 2, PBA No: FFFFFF-0FFPCI: Enabling device 0000:00:1f.3 (0001 -> 0003)ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177lp0: using parport0 (interrupt-driven).lp0: console readyACPI: Power Button (FF) [PWRF]ACPI: Power Button (CM) [PWRB]ACPI: Mapper loadeddell-wmi: No known WMI GUID foundmd: Autodetecting RAID arrays.md: autorun ...md: ... autorun DONE.device-mapper: multipath: version 1.0.6 loadedEXT3 FS on dm-3, internal journalkjournald starting. Commit interval 5 secondsEXT3 FS on dm-1, internal journalEXT3-fs: mounted filesystem with ordered data mode.Adding 2048276k swap on /dev/mapper/ddf1_VOL1GSPp2. Priority:-1 extents:1 across:2048276kIA-32 Microcode Update Driver: v1.14a microcode: CPU0 updated from revision 0x60c to 0x60f, date = 09292010microcode: CPU1 updated from revision 0x60c to 0x60f, date = 09292010Loading iSCSI transport class v2.0-871.802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)iscsi: registered transport (cxgb3i)NET: Registered protocol family 10lo: Disabled Privacy ExtensionsIPv6 over IPv4 tunneling driversit0: Disabled Privacy Extensionscnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012)iscsi: registered transport (bnx2i)

-13-

new 2 13 April 2015 11:13

iscsi: registered transport (tcp)iscsi: registered transport (iser)iscsi: registered transport (be2iscsi)8021q: adding VLAN 0 to HW filter on device eth0ADDRCONF(NETDEV_UP): eth0: link is not readye1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Nonee1000e 0000:0d:00.0: eth0: 10/100 speed: disabling TSOADDRCONF(NETDEV_CHANGE): eth0: link becomes ready8021q: adding VLAN 0 to HW filter on device eth1ADDRCONF(NETDEV_UP): eth1: link is not readye1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: NoneADDRCONF(NETDEV_CHANGE): eth1: link becomes readyeth0: no IPv6 routers presenteth1: no IPv6 routers presentBluetooth: Core ver 2.10NET: Registered protocol family 31Bluetooth: HCI device and connection manager initializedBluetooth: HCI socket layer initializedBluetooth: L2CAP ver 2.8Bluetooth: L2CAP socket layer initializedBluetooth: HIDP (Human Interface Emulation) ver 1.1usb 6-2: USB disconnect, address 2usb 6-2: new full speed USB device using uhci_hcd and address 3usb 6-2: configuration #1 chosen from 1 choiceinput: Logitech USB Receiver as /class/input/input3input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2input: Logitech USB Receiver as /class/input/input4inputhiddev96,hidraw96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-28021q: adding VLAN 0 to HW filter on device eth0ADDRCONF(NETDEV_UP): eth0: link is not readye1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Nonee1000e 0000:0d:00.0: eth0: 10/100 speed: disabling TSOADDRCONF(NETDEV_CHANGE): eth0: link becomes ready8021q: adding VLAN 0 to HW filter on device eth1ADDRCONF(NETDEV_UP): eth1: link is not readye1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: NoneADDRCONF(NETDEV_CHANGE): eth1: link becomes readyeth0: no IPv6 routers presenteth1: no IPv6 routers present8021q: adding VLAN 0 to HW filter on device eth0ADDRCONF(NETDEV_UP): eth0: link is not readye1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:

-14-

new 2 13 April 2015 11:13

Nonee1000e 0000:0d:00.0: eth0: 10/100 speed: disabling TSOADDRCONF(NETDEV_CHANGE): eth0: link becomes ready8021q: adding VLAN 0 to HW filter on device eth1ADDRCONF(NETDEV_UP): eth1: link is not readye1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: NoneADDRCONF(NETDEV_CHANGE): eth1: link becomes readyeth0: no IPv6 routers presenteth1: no IPv6 routers presentYou need to implement a remote task_setrlimit in your security module and call it directly from this functionWARNING: at security/security.c:51 security_ops_task_setrlimit() [] security_ops_task_setrlimit+0x6e/0x85 [] do_prlimit+0xb6/0x18a [] sys_setrlimit+0x35/0x3e [] syscall_call+0x7/0xb =======================usb 6-2: USB disconnect, address 3device eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modehda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successdevice eth0 entered promiscuous modedevice eth0 left promiscuous modehdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXT

-15-

new 2 13 April 2015 11:13

ide0: reset: successINFO: task kjournald:473 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.kjournald D 00084EDE 2732 473 11 498 471 (L-TLB) c5730ed4 00000046 f1da3140 00084ede dc0b83c0 f89107e9

00000000 0000000a c576b0d0 f1da3140 00084ede 00000000 00000000 c576b1dc

c5612a00 f75c4200 16c5f6d4 f7c83cd4 00000000 f7c83cec c043ad9c c042e8db

f7c83ccc 16c5f6d4Call Trace: [] dm_request+0xe2/0xe8 [dm_mod] [] ktime_get_ts+0x16/0x44 [] getnstimeofday+0x30/0xb6 [] io_schedule+0x36/0x59 [] sync_buffer+0x30/0x33 [] __wait_on_bit+0x33/0x58 [] sync_buffer+0x0/0x33 [] sync_buffer+0x0/0x33 [] out_of_line_wait_on_bit+0x62/0x6a [] wake_bit_function+0x0/0x3c [] __wait_on_buffer+0x1c/0x1f [] journal_commit_transaction+0x4d6/0xf60 [jbd] [] lock_timer_base+0x15/0x2f [] try_to_del_timer_sync+0x65/0x6c [] kjournald+0xa1/0x1c2 [jbd] [] autoremove_wake_function+0x0/0x2d [] kjournald+0x0/0x1c2 [jbd] [] kthread+0xc0/0xee [] kthread+0x0/0xee [] kernel_thread_helper+0x7/0x10 =======================INFO: task java:11767 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.java D 00084F07 2544 11767 1 11773 11766 (NOTLB) e0d5af10 00000086 72cba7c0 00084f07 dee70600 000003aa

00001c56 0000000a f77401f0 7354fc00 00084f07 00895440 00000000 f77402fc

c5612a00 c577fac0 c04f6add 00000000 00000000 e0d5af54 c0480d73 e0d5aef4

c5612ebc 00000000Call Trace: [] copy_to_user+0x33/0x4a [] cp_new_stat64+0xfc/0x10e

-16-

new 2 13 April 2015 11:13

[] __mutex_lock_slowpath+0x4d/0x7c [] .text.lock.mutex+0xf/0x14 [] generic_file_llseek_size+0x2a/0x9c [] generic_file_llseek+0x5a/0x62 [] generic_file_llseek+0x0/0x62 [] vfs_llseek+0x30/0x34 [] sys_llseek+0x43/0x84 [] do_syscall_trace+0xab/0xb1 [] syscall_call+0x7/0xb =======================INFO: task kjournald:473 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.kjournald D 00084F0F 2732 473 11 498 471 (L-TLB) c5730ed4 00000046 77a39c00 00084f0f decc3640 f89107e9

00000000 0000000a c576b0d0 77a39c00 00084f0f 00000000 00000000 c576b1dc

c5612a00 f7be7040 16cc52fa f7c83cd4 00000000 f7c83cec c043ad9c c042e8db

c5612ebc 16cc52faCall Trace: [] dm_request+0xe2/0xe8 [dm_mod] [] ktime_get_ts+0x16/0x44 [] getnstimeofday+0x30/0xb6 [] io_schedule+0x36/0x59 [] sync_buffer+0x30/0x33 [] __wait_on_bit+0x33/0x58 [] sync_buffer+0x0/0x33 [] sync_buffer+0x0/0x33 [] out_of_line_wait_on_bit+0x62/0x6a [] wake_bit_function+0x0/0x3c [] __wait_on_buffer+0x1c/0x1f [] journal_commit_transaction+0x4d6/0xf60 [jbd] [] lock_timer_base+0x15/0x2f [] try_to_del_timer_sync+0x65/0x6c [] kjournald+0xa1/0x1c2 [jbd] [] autoremove_wake_function+0x0/0x2d [] kjournald+0x0/0x1c2 [jbd] [] kthread+0xc0/0xee [] kthread+0x0/0xee [] kernel_thread_helper+0x7/0x10 =======================INFO: task auditd:2195 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.auditd D 00084F0E 1792 2195 1 2226 2194 (NOTLB)

-17-

new 2 13 April 2015 11:13

f774eed0 00000082 4b1ccb80 00084f0e 00084efd 0000000e 00000000 0000000a

f704d9f0 4b1ccb80 00084f0e 00000000 00000000 f704dafc c5612a00 f76fae40

f7818268 00000000 00000000 f774eecc c04200ec 00000000 00000000 ffffffff

Call Trace: [] __wake_up+0x2a/0x3d [] prepare_to_wait+0x24/0x46 [] log_wait_commit+0x80/0xc7 [jbd] [] autoremove_wake_function+0x0/0x2d [] journal_stop+0x196/0x1bb [jbd] [] __writeback_single_inode+0x199/0x2a5 [] do_writepages+0x2b/0x32 [] __filemap_fdatawrite_range+0x66/0x72 [] sync_inode+0x19/0x24 [] ext3_sync_file+0xb1/0xdc [ext3] [] do_fsync+0x41/0x83 [] __do_fsync+0x1d/0x2b [] sysenter_past_esp+0x56/0x79 =======================INFO: task syslogd:2226 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.syslogd D 00084F0E 1868 2226 1 2229 2195 (NOTLB) f705bed0 00000086 4b1ccb80 00084f0e 00084f0c 0000000e

00000000 0000000a f7595930 4b1ccb80 00084f0e 00000000 00000000 f7595a3c

c5612a00 f74fb3c0 f7818268 00000000 00000000 f705becc c04200ec 00000000

00000000 ffffffffCall Trace: [] __wake_up+0x2a/0x3d [] prepare_to_wait+0x24/0x46 [] log_wait_commit+0x80/0xc7 [jbd] [] autoremove_wake_function+0x0/0x2d [] journal_stop+0x196/0x1bb [jbd] [] __writeback_single_inode+0x199/0x2a5 [] do_writepages+0x2b/0x32 [] __filemap_fdatawrite_range+0x66/0x72 [] sync_inode+0x19/0x24 [] ext3_sync_file+0xb1/0xdc [ext3] [] do_fsync+0x41/0x83 [] __do_fsync+0x1d/0x2b [] syscall_call+0x7/0xb =======================INFO: task java:11767 blocked for more than 120 seconds.

-18-

new 2 13 April 2015 11:13

"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.java D 00084F07 2544 11767 1 11773 11766 (NOTLB) e0d5af10 00000086 72cba7c0 00084f07 dee70600 000003aa

00001c56 0000000a f77401f0 7354fc00 00084f07 00895440 00000000 f77402fc

c5612a00 c577fac0 c04f6add 00000000 00000000 e0d5af54 c0480d73 e0d5aef4

c5612ebc 00000000Call Trace: [] copy_to_user+0x33/0x4a [] cp_new_stat64+0xfc/0x10e [] __mutex_lock_slowpath+0x4d/0x7c [] .text.lock.mutex+0xf/0x14 [] generic_file_llseek_size+0x2a/0x9c [] generic_file_llseek+0x5a/0x62 [] generic_file_llseek+0x0/0x62 [] vfs_llseek+0x30/0x34 [] sys_llseek+0x43/0x84 [] do_syscall_trace+0xab/0xb1 [] syscall_call+0x7/0xb =======================INFO: task vi:3284 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.vi D 00084F0E 2572 3284 32435 (NOTLB) e04eded0 00000082 4b1ccb80 00084f0e 00084f06 0000000e

00000000 0000000a e0aa82f0 4b1ccb80 00084f0e 00000000 00000000 e0aa83fc

c5612a00 e0672c80 f7818268 00000000 00000000 e04edecc c04200ec 00000000

00000000 ffffffffCall Trace: [] __wake_up+0x2a/0x3d [] prepare_to_wait+0x24/0x46 [] log_wait_commit+0x80/0xc7 [jbd] [] autoremove_wake_function+0x0/0x2d [] journal_stop+0x196/0x1bb [jbd] [] __writeback_single_inode+0x199/0x2a5 [] do_writepages+0x2b/0x32 [] __filemap_fdatawrite_range+0x66/0x72 [] sync_inode+0x19/0x24 [] ext3_sync_file+0xb1/0xdc [ext3] [] do_fsync+0x41/0x83 [] __do_fsync+0x1d/0x2b [] syscall_call+0x7/0xb

-19-

new 2 13 April 2015 11:13

=======================hda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successdevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modehda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }

-20-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successdevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth1 entered promiscuous mode

-21-

new 2 13 April 2015 11:13

device eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modehda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }

-22-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }

-23-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }

-24-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }

-25-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }

-26-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }

-27-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }

-28-

new 2 13 April 2015 11:13

ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successINFO: task kjournald:473 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.kjournald D 002C7616 2732 473 11 498 471 (L-TLB) c5730ed8 00000046 4083b3c0 002c7616 f89107e9 00000000

1bed4308 0000000a c576b0d0 4083b3c0 002c7616 00000000 00000000 c576b1dc

c5612a00 f740d3c0 d3df89ba f7c83cd4 00000000 f7c83cec c043ad9c c042e8db

f7c83ccc d3df89baCall Trace: [] dm_request+0xe2/0xe8 [dm_mod] [] ktime_get_ts+0x16/0x44 [] getnstimeofday+0x30/0xb6 [] io_schedule+0x36/0x59 [] sync_buffer+0x0/0x33 [] sync_buffer+0x30/0x33 [] __wait_on_bit_lock+0x2a/0x52 [] sync_buffer+0x0/0x33 [] out_of_line_wait_on_bit_lock+0x62/0x6a [] wake_bit_function+0x0/0x3c [] __lock_buffer+0x21/0x24 [] journal_commit_transaction+0x2d4/0xf60 [jbd] [] lock_timer_base+0x15/0x2f [] try_to_del_timer_sync+0x65/0x6c [] kjournald+0xa1/0x1c2 [jbd] [] autoremove_wake_function+0x0/0x2d [] kjournald+0x0/0x1c2 [jbd] [] kthread+0xc0/0xee [] kthread+0x0/0xee [] kernel_thread_helper+0x7/0x10 =======================INFO: task syslogd:2226 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.syslogd D 002C7615 1868 2226 1 2229 2195

-29-

new 2 13 April 2015 11:13

(NOTLB) f705bed0 00000086 10f2b080 002c7615 c0459770 0000000e

00000000 0000000a f7595930 10f2b080 002c7615 00000000 00000000 f7595a3c

c5612a00 f74fb3c0 f7818268 00000000 00000000 f705becc c04200ec 00000000

c5612a44 00000003Call Trace: [] find_get_pages_tag+0x30/0x75 [] __wake_up+0x2a/0x3d [] prepare_to_wait+0x24/0x46 [] log_wait_commit+0x80/0xc7 [jbd] [] autoremove_wake_function+0x0/0x2d [] journal_stop+0x196/0x1bb [jbd] [] __writeback_single_inode+0x199/0x2a5 [] do_writepages+0x2b/0x32 [] __filemap_fdatawrite_range+0x66/0x72 [] sync_inode+0x19/0x24 [] ext3_sync_file+0xb1/0xdc [ext3] [] do_fsync+0x41/0x83 [] __do_fsync+0x1d/0x2b [] syscall_call+0x7/0xb =======================INFO: task java:7164 blocked for more than 120 seconds."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.java D 002C7615 2508 7164 1 7165 7163 (NOTLB) d09d8cb4 00200086 167dc1c0 002c7615 8f4dd788 00000001

f7968c80 0000000a d97c28d0 167dc1c0 002c7615 00000000 00000000 d97c29dc

c5612a00 f76a3200 f7905468 05f08d48 00000000 00000008 0fd00003 c042e8db

df36f4ec d3df62aaCall Trace: [] getnstimeofday+0x30/0xb6 [] io_schedule+0x36/0x59 [] sync_buffer+0x30/0x33 [] __wait_on_bit+0x33/0x58 [] sync_buffer+0x0/0x33 [] sync_buffer+0x0/0x33 [] out_of_line_wait_on_bit+0x62/0x6a [] wake_bit_function+0x0/0x3c [] __wait_on_buffer+0x1c/0x1f [] sync_dirty_buffer+0x80/0xb2 [] journal_dirty_data+0xee/0x1df [jbd] [] ext3_journal_dirty_data+0xc/0x2a [ext3] [] walk_page_buffers+0x4b/0x64 [ext3]

-30-

new 2 13 April 2015 11:13

[] ext3_ordered_write_end+0x60/0x109 [ext3] [] ext3_journal_dirty_data+0x0/0x2a [ext3] [] generic_file_buffered_write+0x159/0x5bf [] __generic_file_aio_write_nolock+0x4a6/0x52a [] futex_wake+0x81/0xb0 [] generic_file_aio_write+0x59/0xac [] ext3_file_write+0x19/0x83 [ext3] [] do_sync_write+0xb6/0xf1 [] tcp_ioctl+0xff/0x10a [] do_ioctl+0x1c/0x5d [] autoremove_wake_function+0x0/0x2d [] audit_syscall_entry+0x193/0x1bd [] do_sync_write+0x0/0xf1 [] vfs_write+0xa1/0x143 [] sys_write+0x3c/0x63 [] syscall_call+0x7/0xb =======================hda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successdevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth0 entered promiscuous mode

-31-

new 2 13 April 2015 11:13

device eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modehdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXT

-32-

new 2 13 April 2015 11:13

ide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXT

-33-

new 2 13 April 2015 11:13

ide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXT

-34-

new 2 13 April 2015 11:13

ide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXT

-35-

new 2 13 April 2015 11:13

ide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXT

-36-

new 2 13 April 2015 11:13

ide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXT

-37-

new 2 13 April 2015 11:13

ide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXT

-38-

new 2 13 April 2015 11:13

ide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXT

-39-

new 2 13 April 2015 11:13

ide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXT

-40-

new 2 13 April 2015 11:13

ide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXT

-41-

new 2 13 April 2015 11:13

ide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXT

-42-

new 2 13 April 2015 11:13

ide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successi2c /dev entries driverw83627hf: Found W83627HF chip at 0x290ip_tables: (C) 2000-2006 Netfilter Core TeamNetfilter messages via NETLINK v0.30.ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrackdevice eth0 entered promiscuous mode

-43-

new 2 13 April 2015 11:13

device eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modehda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successdevice eth0 entered promiscuous modedevice eth0 left promiscuous modehda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhda: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhda: no DRQ after issuing MULTWRITE_EXTide0: reset: successhdc: status timeout: status=0xd0 { Busy }ide: failed opcode was: unknownhdc: no DRQ after issuing MULTWRITE_EXTide1: reset: successdevice eth1 entered promiscuous modedevice eth1 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous mode

-44-

new 2 13 April 2015 11:13

device eth0 left promiscuous modedevice eth1 entered promiscuous modedevice eth1 left promiscuous mode8021q: adding VLAN 0 to HW filter on device eth0ADDRCONF(NETDEV_UP): eth0: link is not readye1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Nonee1000e 0000:0d:00.0: eth0: 10/100 speed: disabling TSOADDRCONF(NETDEV_CHANGE): eth0: link becomes ready8021q: adding VLAN 0 to HW filter on device eth1ADDRCONF(NETDEV_UP): eth1: link is not readye1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: NoneADDRCONF(NETDEV_CHANGE): eth1: link becomes readyeth0: no IPv6 routers presenteth1: no IPv6 routers present8021q: adding VLAN 0 to HW filter on device eth0ADDRCONF(NETDEV_UP): eth0: link is not readye1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Nonee1000e 0000:0d:00.0: eth0: 10/100 speed: disabling TSOADDRCONF(NETDEV_CHANGE): eth0: link becomes ready8021q: adding VLAN 0 to HW filter on device eth1ADDRCONF(NETDEV_UP): eth1: link is not readye1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: NoneADDRCONF(NETDEV_CHANGE): eth1: link becomes readyeth0: no IPv6 routers presenteth1: no IPv6 routers presentusb 6-2: new full speed USB device using uhci_hcd and address 4usb 6-2: configuration #1 chosen from 1 choiceinput: Logitech USB Receiver as /class/input/input5input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2input: Logitech USB Receiver as /class/input/input6inputhiddev96,hidraw96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2usb 6-2: USB disconnect, address 4device eth0 entered promiscuous modedevice eth0 left promiscuous modedevice eth0 entered promiscuous modedevice eth0 left promiscuous mode

-45-