1.4kesd5.0 thru 1.4kesd170ca axial-lead tvs
TRANSCRIPT
-
8/14/2019 1.4kesd5.0 Thru 1.4kesd170ca Axial-lead Tvs
1/5
AXIAL-LEAD TVS
S C O T T S D A L E D I V I S I O N
1.4KESD5.0 thru 1.4KESD170CA
DESCRIPTION APPEARANCE
These small axial-leaded TVS devices feature the ability to clampdangerous high voltage short-term transients such as produced by directedor radiated electrostatic discharge phenomena before entering sensitivecomponent regions of a circuit design. They are small economical transientvoltage suppressors targeted primarily for short-term transients below a fewmicroseconds while still achieving significant peak-pulse-power capabilityas illustrated in Figure #1.
IMPORTANT: For the most current data, consult MICROSEMIs website: http://www.microsemi.com
FEATURES APPLICATIONS / BENEFITS
Excellent protection in clamping direct ESD leveltransients in excess of 15,000 V per MIL-STD-750,Method 1020 (approx. 150 ns exponential wave)
Absorbs ESD level transients* of 1400 Watts perMIL-STD-750, Method 1020 (approx. 150 nsexponential wave, or one microsecond transients upto 400 watts. See Figure #1 and #2 for overalltransient Peak Pulse Power.
Clamps Transients in less than 100 picoseconds
Working Stand-off Voltage range of 5 V to 170 V
Hermetic DO-35 Package. Also available in surface
mount DO-213AA MELF package (see separatedata sheet)
Protects Sensitive circuits from short duration fastrise time transients such as Electrostatic Discharge(ESD) or Electrical Fast Transients (EFT)
Low inherent capacitance for high-frequencyapplications (See Figure #4)
Flexible axial-lead mounting terminals
Bidirectional features available by adding a C orCA suffix
MAXIMUM RATINGS MECHANICAL AND PACKAGING
400 Watts for One Microsecond Square Wave or1400 watts per ESD Wave form of MIL-STD-750,method 1020.
See Surge Rating curve in Figures #1 and 2.
Operating and storage temperature 65oC to 175
oC
THERMAL RESISTANCE: Less than 250oC/W
junction to lead at 0.375 inches from body.
DC power dissipation 500 mW at TL = 75o
C at 3/8inch (10 mm) lead length from body.
Derate at 2.3 W/oC above 25
oC for PPP (1s) and at
5 mW/oC above 100
oC for dc power.
Forward Surge Current 50 amps for 1s at TL = 25oC
(rise time > 100 ns).
CASE: Hermetically sealed axial-lead glass DO-35(DO-204AH) package
TERMINALS: Leads, tin-lead plated solderable perMIL-STD-750, method 2026
POLARITY: Banded end is cathode
WEIGHT: 0.2 grams (typical)
MARKING: Part number
TAPE & REEL option: Standard per EIA-296 (addTR suffix to part number)
See package dimension on last page
DO-35(DO-204AH)
MicrosemiScottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1Copyright 200210-02-2003 REV A
http://www.microsemi.com/http://www.microsemi.com/ -
8/14/2019 1.4kesd5.0 Thru 1.4kesd170ca Axial-lead Tvs
2/5
AXIAL-LEAD TVS
S C O T T S D A L E D I V I S I O N
1.4KESD5.0 thru 1.4KESD170CA
ELECTRICAL CHARACTERISTICS
REVERSESTAND-OFFVOLTAGE
BREAKDOWNVOLTAGE
VBRMINIMUM
BREAKDOWNCURRENT
MAXIMUMSTANDBYCURRENT
MAXIMUMCLAMPINGVOLTAGE
PEAKPULSE
CURRENTTYPENUMBER* VWM V(BR) I(BR) ID @ VWM VC @ IPP IPP**
VOLTS VOLTS mA A VOLTS AMPS1.4KESD5.01.4KESD5.0A1.4KESD6.01.4KESD6.0A
5.05.06.06.0
6.406.406.676.67
10101010
600600600600
13.713.214.814.0
29.2029.8527.0028.50
1.4KESD6.51.4KESD6.5A1.4KESD7.01.4KESD7.0A
6.56.57.07.0
7.227.227.787.78
10101010
400400150150
16.015.217.316.4
24.9426.3223.1224.42
1.4KESD7.51.4KESD7.5A1.4KESD8.0
1.4KESD8.0A
7.57.58.0
8.0
8.338.338.89
8.89
1.01.01.0
1.0
505025
25
18.517.519.8
18.7
21.5722.8120.20
21.371.4KESD8.51.4KESD8.5A1.4KESD9.01.4KESD9.0A
8.58.59.09.0
9.449.4410.010.0
1.01.01.01.0
55
1.01.0
20.919.822.221.1
19.1020.1618.0218.96
1.4KESD101.4KESD10A1.4KESD111.4KESD11A
10101111
11.111.112.212.2
1.01.01.01.0
1.01.01.01.0
24.723.427.125.7
16.1917.0914.7615.56
1.4KESD121.4KESD12A1.4KESD131.4KESD13A
12121313
13.313.314.414.4
1.01.01.01.0
1.01.01.01.0
29.628.032.030.3
13.5114.2912.5013.20
1.4KESD141.4KESD14A1.4KESD151.4KESD15A
14141515
15.615.616.716.7
1.01.01.01.0
1.01.01.01.0
31.229.533.431.7
12.8113.6011.9812.63
1.4KESD16
1.4KESD16A1.4KESD171.4KESD17A
16
161717
17.8
17.818.918.9
1.0
1.01.01.0
1.0
1.01.01.0
35.6
33.837.835.8
11.22
11.8510.5811.17
1.4KESD181.4KESD18A1.4KESD201.4KESD20A
18182020
20.020.022.222.2
1.01.01.01.0
1.01.01.01.0
40.037.944.442.0
10.0010.569.029.52
1.4KESD221.4KESD22A1.4KESD241.4KESD24A
22222424
24.424.426.726.7
1.01.01.01.0
1.01.01.01.0
48.846.253.450.6
8.208.667.497.91
1.4KESD261.4KESD26A1.4KESD281.4KESD28A
26262828
28.928.931.131.1
1.01.01.01.0
1.01.01.01.0
57.854.762.259.0
6.937.316.436.79
1.4KESD301.4KESD30A1.4KESD331.4KESD33A
30303333
33.333.336.736. 7
1.01.01.01.0
1.01.01.01.0
66.663.173.469.6
6.016.345.455.75
1.4KESD361.4KESD36A1.4KESD401.4KESD40A
36364040
40.040.044.444.4
1.01.01.01.0
1.01.01.01.0
80.075.888.884.2
5.005.284.504.75
1.4KESD431.4KESD43A1.4KESD451.4KESD45A
43434545
47.847.850.050.0
1.01.01.01.0
1.01.01.01.0
95.690.5
100.094.8
4.184.424.004.22
1.4KESD481.4KESD48A1.4KESD511.4KESD51A
48485151
53.353.356.756.7
1.01.01.01.0
1.01.01.01.0
106.6101.0113.4107.5
3.753.963.533.72
MicrosemiScottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2Copyright 200210-02-2003 REV A
-
8/14/2019 1.4kesd5.0 Thru 1.4kesd170ca Axial-lead Tvs
3/5
AXIAL-LEAD TVS
S C O T T S D A L E D I V I S I O N
1.4KESD5.0 thru 1.4KESD170CA
REVERSESTAND-OFF
VOLTAGE
BREAKDOWNVOLTAGE
VBR
MINIMUM
BREAKDOWN
CURRENT
MAXIMUMSTANDBY
CURRENT
MAXIMUMCLAMPING
VOLTAGE
PEAKPULSE
CURRENTTYPENUMBER* VWM V(BR) I(BR) ID @ VWM VC @ IPP IPP**
VOLTS VOLTS mA A VOLTS AMPS1.4KESD541.4KESD54A1.4KESD581.4KESD58A
54545858
60.060.064.464.4
1.01.01.01.0
1.01.01.01.0
120.0113.7128.9122.0
3.333.523.103.28
1.4KESD601.4KESD60A1.4KESD641.4KESD64A
60606464
66.766.771.171.1
1.01.01.01.0
1.01.01.01.0
133.4126.4142.2134.7
3.003.172.812.97
1.4KESD701.4KESD70A1.4KESD751.4KESD75A
70707575
77.877.883.383.3
1.01.01.01.0
1.01.01.01.0
155.6147.4166.8158.0
2.572.712.402.53
1.4KESD781.4KESD78A
1.4KESD851.4KESD85A
7878
8585
86.786.7
94.494.4
1.01.0
1.01.0
1.01.0
1.01.0
173.4164.3
188.5178.6
2.312.44
2.122.24
1.4KESD901.4KESD90A1.4KESD1001.4KESD100A
9090100100
100.0100.0111.0111.0
1.01.01.01.0
1.01.01.01.0
199.8189.9222.3210.6
2.002.111.801.90
1.4KESD1101.4KESD110A1.4KESD1201.4KESD120A
110110120120
122.0122.0133.0133.0
1.01.01.01.0
1.01.01.01.0
243.9213.3266.4252.0
1.641.731.501.59
1.4KESD1301.4KESD130A1.4KESD1501.4KESD150A
130130150150
144.0144.0167.0167.0
1.01.01.01.0
1.01.01.01.0
288.0273.0333.9316.8
1.391.471.201.26
1.4KESD1601.4KESD160A1.4KESD1701.4KESD170A
160160170170
178.0178.0189.0189.0
1.01.01.01.0
1.01.01.01.0
356.4337.5378.0358.2
1.121.191.061.12
* For bidirectional, add a C or CA suffix after the part number, e.g. 1.4KESD5.0C or 1.4KESD5.0CA for the
1.4KESD5.0 or 1.4KESD5.0A part numbers respectively. Capacitance will be one-half that shown in Figure 4 at zero volts.** At 400 watts 1s square wave rating (See Figures 1 and 2).
OUTLINE AND CIRCUIT
PPP
P
eakPulsePower
tp Pulse Time
FIGURE 1 FIGURE 3Peak Pulse Power vs. Pulse Width
(*Exponential Wave Form Pulse Width to 50% Decay of Peak.)
MicrosemiScottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3Copyright 200210-02-2003 REV A
-
8/14/2019 1.4kesd5.0 Thru 1.4kesd170ca Axial-lead Tvs
4/5
AXIAL-LEAD TVS
MicrosemiScottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4Copyright 200210-02-2003 REV A
S C O T T S D A L E D I V I S I O N
1.4KESD5.0 thru 1.4KESD170CA
ClampingFactorVC/V(BR)
Breakdown Voltage V(BR) in Volts FIGURE 4FIGURE 2 Capacitance vs. V(BR) for unidirectional.
Clamping Factor vs. Breakdown Voltage for Various Power Levels For Bidirectional, value is one-half thatshown at zero volts.
PACKAGE DIMENSIONS
DO-35
-
8/14/2019 1.4kesd5.0 Thru 1.4kesd170ca Axial-lead Tvs
5/5
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.
http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/