Upload File

15...30 a max. 0.8-5.0 vdc 20 a max. 0-3.3 vdc 16 a max. 3.4-5.0 vdc suffix letters and/or numbers...

  • Home
  • Documents
  • 15...30 A max. 0.8-5.0 VDC 20 A max. 0-3.3 VDC 16 A max. 3.4-5.0 VDC Suffix letters and/or numbers denoting non-safety-critical options such as, but not limited to, positive or negative
5

Upload: others

Post on 17-Jul-2020

2 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: 15...30 A max. 0.8-5.0 VDC 20 A max. 0-3.3 VDC 16 A max. 3.4-5.0 VDC Suffix letters and/or numbers denoting non-safety-critical options such as, but not limited to, positive or negative
Page 2: 15...30 A max. 0.8-5.0 VDC 20 A max. 0-3.3 VDC 16 A max. 3.4-5.0 VDC Suffix letters and/or numbers denoting non-safety-critical options such as, but not limited to, positive or negative
Page 3: 15...30 A max. 0.8-5.0 VDC 20 A max. 0-3.3 VDC 16 A max. 3.4-5.0 VDC Suffix letters and/or numbers denoting non-safety-critical options such as, but not limited to, positive or negative
Page 4: 15...30 A max. 0.8-5.0 VDC 20 A max. 0-3.3 VDC 16 A max. 3.4-5.0 VDC Suffix letters and/or numbers denoting non-safety-critical options such as, but not limited to, positive or negative
Page 5: 15...30 A max. 0.8-5.0 VDC 20 A max. 0-3.3 VDC 16 A max. 3.4-5.0 VDC Suffix letters and/or numbers denoting non-safety-critical options such as, but not limited to, positive or negative

 · Book 1000 Led 550 550 1000 Star GD 20 Star GD 20 Led Star GD 40 Led Newton max Content of the package See picture 1 See picture 1 See picture 1 Motor 24 Vdc 24 Vdc 24 Vdc Code

NON-DISPERSIVE NFRARED ANALYZER MODULE · POWER REQUIREMENTS: 24 VDC ±5%, 100 W max.; ripple and noise:

Presentazione standard di PowerPoint · technical features master code spn8 power supply 9-36 vdc / current consumption 50 ma at 24 vdc (stand by mode) input total 24 max 8 analogic

az8521 - azettler.com · RELAY ORDERING DATA NON-LATCHING VERSION - STANDARD Nominal Coil Max. Continuous Must Operate ORDER NUMBER VDC VDC VDC THT SMT* SMT Short Leg* 1.5 2.2 1.13

Industrial Slim Relay Rated at 6 Amps · Rated load 6 A at 250 VAC; 6 A at 30 VDC 2.5 A at 250 VAC; 2 A at 30 VDC Rated carry current 6 A Max. switching voltage 400 VAC, 125 VDC Max

SERIES SS SWITCHES€¦ · SS Example Ordering Number SS_075_03_01_F030_P1_A SPECIFICATIONS Contact Rating: Gold .4VA max. @ 20 VDC or VAC Max. 0.1 Amps @ 1.5 Amps @ 3 Amps @ Life

Sector CSI 04 Spec [260943] 10-07-2009 · Web view8 — 30VDC, 40mA power supply input 0 — 30 VDC, 130mA output rating 30 VDC max, 100 mA max, relay driver Attached external Whip

Scanned by CamScanner · TECHNICAL SPECIFICATIONS FOR EXTERIOR GRADE COMPACT LAMINATES GREENLAM CLADS Greenlam Clads Value 6.00± 0.35 3.0 max. + 5.0 I .00 max. dwiotion 1.00 max

Culligan High Efficiency Iron-Cleer Water Filter Owners Guide · Max. Clear Water (Soluble) Iron 10 ppm 10 ppm Max. Hydrogen Sulfide3 5.0 ppm 5.0 ppm Minimum Alkalinity 100 ppm 100

TruStability Board Mount Pressure Sensors · operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure absolute, gage, or differential pressures. The

ARx Series...ARx Series Air Cooled Active Resistance DC Electronic Load MAGNALOAD Number of Models 18 Power Levels 7.5 kW to 45 kW+ Max. Voltage Levels From 200 Vdc to 1,000 Vdc Max

S10 | Hohner Automáticosdocs.encoderhohner.com/SERIE-10/S10_EN_01web.pdf · “High” signal level VOH > 22 VDC (24 VDC) VOH > 2.5 VDC VOH > 2.5 VDC VOH > VCC – 3 VDC Frequency

i7A Series Datasheet - TDKInput Transient (t < 100 ms) Vdc 65 max 36 max Input Current (max) A 50 Efficiency % 91 - 98 93 - 98.5 Safety Agency Certifications - IEC/EN/UL/CSA 62368-1,

P-600 User Manual WGS 31MAY2011 - ProCare Medical...Charger Input: 100-240 VAC, 0.35 Amps Charger Output: 29.5 VDC, 1.3 Amps Batteries: 24 VDC (2 x 12 VDC) 5.0 AH Lift Case: Flame

Series C / B 4500 - Schaefer · 2019-05-03 · Output VDC 10 –16 VDC Output Amps 20 – 32 VDC Output Amps 40 – 64 VDC 50 – 80 VDC 80 –160 VDC 160 – 320 VDC 320 – 380

FCM II (Flow Control Module)...2020/06/16  · FCM II DC OUT Min. 19 Vdc Max. 36 Vdc 100mA Max 30 Vdc 250mA max. 6K Cycles, Pilot Duty Figure 1.2 FCM II Module Electrical Ratings Chapter

Freescale Semiconductor MPXV4006 · 2016. 11. 23. · MPXV4006 Sensors Freescale Semiconductor 3 Pressure Operating Characteristics Table 1. Operating Characteristics (VS = 5.0 Vdc,

T-H Control System - Home :: TPS Thermal Controls · 2x relay outputs, max 2 A - 230 Vac 5x triac outputs, max 3 A - 230 Vac 1x analog output 0-10 Vdc 1x analog output 3 Vdc (20 mA)

Access - Gate Openers | Automatic Gate Openers · Technical data Access Access-L Access Pro Access Pro-L Barrier width Max. 3.5 m Max. 5.0 m Max. 3.5 m Max. 6.0 m Opening/closing

Guía de inicio rápido - Bosch Security and Safety ...resource.boschsecurity.com/documents/B4512_B5512_Quick_Install… · SLOT 2 SLOT Open 3.7 - 5.0 VDC Normal 2.0 - 3.0 VDC Short

Non-Contact Shaft-to-Shaft Rotary Torque Sensor with … Drawings/trs705.pdf · Rotational Speed 7000 Max ELECTRICAL Rated Output (RO) ±5 VDC Excitation (VDC or VAC) 11–26 VDC,

28 Vdc MIL-COTS DESIGN GUIDE VIPAC - Vicor Corporation · 2020. 11. 23. · 28 Vdc Input MIL-COTS Version ParameterMinTyp Max Unit Notes Operating input voltage 18 28 36 Vdc Continuous

L RECOGNIZED 0.50 Watt 1.25 Watt · 500 VDC Q05 QH05 600 VDC Q06 QH06 700 VDC Q07 QH07 800 VDC Q08 QH08 900 VDC Q09 QH09 1,000 VDC Q10 QH10 1,200 VDC Q12 QH12 1,500 VDC Q15 QH15 2,000

SUN STORAGE - Ingeteam€¦ · MSSU SA Power U B Series 1,500 Vdc Notes: (1) Minimum voltage DC (VDC, min) for Vgrid,max = 1.1 p.u. and Power Factor=1 If Vgrid,max is higher than

Installation Instructions for the Basic Amplified …...1Sensors are either 3.3 Vdc or 5.0 Vdc based on the catalog listing selected. 2Ratiometricity of the sensor (the ability of

PFE1300-48-054NA 1300 W, 48 VDC Output - Bel - Power · PDF filePFE1300-48-054NA 1300 W, 48 VDC Output ... The always-on standby output, with selectable voltage level (3.3/5.0 Volts),

VYCON DIRECT CONNECT VDC and VDC XE - Extranet …lit.powerware.com/ll_download.asp?file=VDC VDC XE User Manual UL... · VYCON VDC and VDC XE User Manual i TABLE OF CONTENTS 1.0 Important

Insat C-band 10W BUC series - New Japan Radio(NJR) · 2.0 : 1 max.-28 dBc typ. @total power = +40dBm - 3dB +24 / +48 VDC (+18 to +60 VDC) / 73 W typ., 80 W max. AC Power Option: 90

CTVS Ceramic transient voltage suppressors · Electrical specifications and ordering codes Maximum ratings (Top,max) Type Ordering code VRMS,max V VDC,max V Isurge,max (8/20 µs)

Not just your ordinary Autopilot - FURUNOšng Processor Unit: IP55 Control Unit: IP56 Gesture Controller: IP67 POWER SUPPLY Processor Unit 12-24 VDC 0.22 A max. Control Unit 15 VDC

Grove - 4-Digit Display - mouser.com · Stopwatch Sensors’ input display. 5 4. Specifications Item Min Typical Max Unit Voltage 3.3 5.0 5.5 VDC Current 0.2 27 80 mA Dimensions 42x24x14

EPSILON...Epsilon 495 C0 / C180 C90 / C270 cd / 1000 lm 16000 90˚ 60˚ 30 2691 1092 673 4852 99 273 168 1751 08 = 5.0˚+ 5.0˚ = 5.0˚+ 5.0˚ m Max Med 1.00 2.00 3.00 4.00 5.00 4368

LM567/LM567C Tone Decoder (Rev. D)LM567 LM567C/LM567CM Parameters Conditions Units Min Typ Max Min Typ Max Power Supply Voltage Range 4.75 5.0 9.0 4.75 5.0 9.0 V Power Supply Current

LON Automation Interface Module (Serial Model# AIM-lon-seR ... · 6 C D 9 # ONOFF VDC +24 CH21 VDC +24 OFF CH19 VDC CH20 ON CH22 OFF ON VDC +24 7CH 8 VDC VDC VDC 3 5 VDC +24 OFF VDC

NX-series EtherCAT Coupler Unit NX-ECC · Power supply voltage 24 VDC (20.4 to 28.8 VDC) NX Unit power supply capacity 10 W max. Refer to Installation orientation and restrictions