enclosures 15 enclosure 2 meters above ground Ø50 and 60 mm plastic-coated steel tubular posts trim...
TRANSCRIPT
ENCLOSURES ENCL
OSUR
ES
BALL-STOPRANGE PRESENTATION
NORMS All ball stop netting structures must meet the requirements of AFNOR standard XP ENV 1991-2-4.This standard is now a benchmark for invitations to tender or for project management. It takes into account the actions of the wind on the ball stop depending on installation environment, height above ground level, spacing between posts and the net filling (mesh, net, screenbreak..). Calculation can be used to determine the appropriate steel tube section for your netting. See the wind map in the “informations” section. Certified calculation notes may be delivered when ordering.
INFORMATION
Metalu-Plast’s team realizes made-to-measure project on basis of the information provided by customer:- Length and height to fit,- Installation of the structure (angle, straight line, adaptation on existing structure...),- Sports practice or other intended use (barrier papers, rockfall, center penitentiary...),See the “ball-stop project” spreadsheet in the “Informations” section.
The knowledge of these elements and the study of the strength on the structure allow to determine:- Type of posts: bipode (for the most exposed area), or monotube- Dimension and height of post- Mesh of the net- Filling type at the lower part
PRODUCT BENEFITS
Available in very high height Very high resistance 100% made-to-measure Very easy and quick to install With or without wind bracing No collars or deck fittings to be screwed
GREEN, RAL6005
COLOR +
10
ADVICE
For high height projects or enclosures with tighter mesh (windbreak, arrow-stop...) or for ones that will be subjected to considerable constraint (tighter mesh...), «Bipode» per-mits structure to be reinforced without using wind bracing.
BALL-STOP
Description Plastic-coated steel tubular posts. Height available from 3 to 13 m above ground Standard spacing between posts: from 5 to 7.5 m
(according to the calculation note). The structure is composed of different types of
posts: end, corner, retention, line post, wind bracer, straining post, strut.
Fixing the filling:- The posts are adapted to facilitate the mounting of the net.- The lower parts of the posts are adapted to receive welded mesh panels or simple twist toasting or, upon request, other type of filling (wood – concrete...).
- Deck fittings: - Brake nut anticorrosion - Pulley support, stiffener plate and fully welded stainless steel rings - dB-Stop mounted on posts
Description: 4 post dimensions: Ø114/102 mm, Ø 102/102 mm, Ø 102/90 mm or Ø 80/60 mm. Suitable for projects up to 13 meters above ground and/or dense filling. Very resistant structure due to its form: plastic-coated, galvanized double post, linked with 3 mm welded sheet metal, on 70 % of the length.
Posts can be spaced further apart compared to the installation of single posts.
Description : 7 round or rectangular posts sections: Ø 50, 60, 80, 90, 102, 114 mm and 80x150 mm
Structure adapted to project up to 10m above ground
POSTS
Ref. BA020210
BIPODE POST SINGLE POST
ENCL
OSUR
ES
11
12
BALL-STOPFILLING
NET ON UPPER PART
SINGLE TWIST WIRE MESH
The dimensions of the net, on upper and lower part, are adapted to each ball-stop.
The mesh size selected differs depending on the usage: - 25 mm for golf enclosure and projectile-stop
- 48 mm for baseball, tennis, hockey, basque pelota enclosures and paper- stop - 100, 120 and 145 mm for the enclosure of balls sports (basketball, handball, football, rugby …) - Arrow backstop netting for archery - Windbreak and screen-break
Net accessories - Green sheathed steel 5 mm cable in the entire perimeter of the net.
- Split rings for connecting the cable and the net (3 rings/meter except for the golf and the tennis 4 rings/meter). - N°4 stiffeners for tensioning the cable.
Trim of the lower part of the ball-stop up to 2 meters height (standard), or more on request.
Adaptation of posts for an easiest installation of the toasting: - On end and corner posts: welded plate in order to fix the stiffener. - On retention and line posts: stainless steel rings or wire guides welded every 50cm.
Toasting to choose: diameter of 3.9/4.4 or 2.7/3.1 mm, with a 50 mm wire mesh.
ENCL
OSUR
ES
13
FILLING
Trim of the lower part of the ball-stop up to 2 meters (standard height) or more, on request The «dB-Stop flange» is delivered already mounted on the posts
Trim of the lower part of the ball-stop up to 2 meters (standard height). Panels attached with stainless steel clips on an aluminium shiplap posts or on an aluminium profile fixed on a steel post.
Panel description: - Double wire Ø 6 mm, total height 2.25 m
- Height of lower section 1.05 m with mesh 55 x 150 mm - Height of upper section 1.20 m with mesh 165 x 150 mm + pins
Fixing with «dB-Stop»flange.
WELDED MESH PANELS WITH DB-STOP SYSTEM
SHIPLAP SYSTEM
MEDITERRANEAN LEAGUE PANEL
«dB-Stop» flange presentation:The «dB-Stop» flange has the double advantage to be quick and easy to install on stadium fencing. This fixing system limits the noise pollution and vibration of ball stop structures, offering a better longevity of the product.
The polypropylene plug shock absorbers come attached on the posts by an insert.
The «dB-Stop» flange allows you to attach 2 panels at the same time for an easiest installation.
The product is compatible with all the straight, double- wire welded mesh panels, available on the market (8/6/8 – 6/5/6).
Panel attached by brushed stainless steel stirrups and tamper-proof torx screws.
ADVICES
Why choosing Mediterranean League panel?- For the sports center and to conform to Mediterranean league, to Languedoc-Roussillon and Corsica
- For «class 1 and 2 - F.F.F rules” stadium
BALL-STOP
14
BALL-STOPSPECIFIC STRUCTURES
Electro galvanized welded U which allows to receive a concrete or wood plate thickness 40mm (for Hockey field for example)
Wall or ground mounting plate ball-stop Cranked top ball-stop
Option Grey RAL Option Red RAL Windbreak
Arrow-backstop
Hockey fence adaptation for ball-stop
OPTIONS
ACHIEVEMENTS AND PRACTICAL USE
Welded plate at the bottom of the post. Anticorrosion treatment adapted to seaside or polluted areas
Enhances of an existing structure. Other RAL colors on request
ENCL
OSUR
ES
15
ENCLOSURE 2 METERS ABOVE GROUND
Ø50 and 60 mm plastic-coated steel tubular posts Trim of the lower part of the ball-stop up to 2 meters 5 fixing points per post:
- With Welded plates on the end, angle, or retention post - With welded wire guides (2.7/3.1 toasting) or welded stainless steel rings (3.9/4.4 toasting) for the line post
Ø60 mm plastic-coated steel tubular posts Trim of the lower part of the ball-stop up to 2 meters Fixing of welded mesh panels with 5 «dB-Stop»flanges per post (cf.boxed text p.13)
Ø60 mm plastic-coated aluminium posts Trim of the lower part up to 2 meters
Panels fixed to the aluminium shiplap posts with stainless steel clips and tamper-proof screw
Grillage simple torsion
SINGLE TWIST TOASTING
WELDED MESH WITH DB-STOP SYSTEM
Ø 80 mm plastic-coated galvanized steel posts Height 2.3m above ground Trim of the lower part of the ball-stop up to 2.25 meters
Mediterranean League panels attached with 6 «dB-Stop»flanges per post (cf.boxed text p.13)
MEDITERRANEAN LEAGUE PANELS
SHIPLAP POST
Metalu-Plast’s team realizes made-to-measure project on basis of the information provided by customer:- Length to fit- Setting up of the structure (angle, straight line, adaptation on existing structure...)
GREEN, RAL6005
COLOR +
16
HANDRAILRANGE PRESENTATION
Description
Handrail dimensions: - Total post height 1.50 m - Post height above ground: 1.04 m. - Handrail height above ground:1.10 m
Ø60 mm posts and rails
3 different finishing: - Hot galvanized, - Plastic-coated galvanized, - Plastic-coated aluminium.
Spacing between posts: - Aluminium handrail 2 m or 2.50 m (and 2.55 for «Axle» version) - Steel handrail 2 m, 2.50 m or 3 m.
Details about the assembly: - Handrail assembled with one-piece or half-shells tees. - Tees attached by screws or rivets. - Handrail finishing by male or female elbow. - Corners realized by 90° angles or orientable angles.
Metalu-Plast’s team realizes the project implantation on basis of the information provided by customer:- Length to fit,- Type of trim on the lower part,- Type of sport.Our solutions allow adaptation to all field constraints (not defined curve and angle) due to variousaluminium connectors, for all models.
WHITE, RAL9010
COLOR +
ENCL
OSUR
ES
17
WITH WELDED MESH PANELS
80 x 60 mm ovoid plastic-coated aluminium post Plastic-coated aluminium rail Mounting the panels with ««dB-Lock®»» system. The «dB-Lock®» system is a fixing for 1m height panel. It allows to fix the panel in the axle and integrate it in the rail of the handrail. It ensures a perfect mechanical outfit and integrate an anti-noise system Trim: use straight panels with double wire 8/6/8 or 6/5/6 with dimensions 2.48 x 1 m. Tee fixing with CHC. screw Optional: wood baseboard, 40mm thickness, on lower part integrated with a «U» fixed on the post
Steel posts pre-fitted with dB-Stop flanges (3 per post) fixed by an insert (cf.boxed text p.13). Aluminium or plastic-coated galvanized steel rail Trim:
- Use straight panels with double wire 8/6/8 or 6/5/6 with dimensions 2.48 x 0.83 m. - Pleated panels on request.
Panels attached with stainless steel clips and tamper proof screw to the shiplap posts. Trim: large range of available panels.
OVOID ALUMINIUM POST WITH PANEL IN THE AXLE
FIXING WITH DB-STOP SYSTEM
ON SHIPLAP POST
HANDRAIL
PRODUCT BENEFITS
Panel integrated in the handrail Ovoid Tube Panel on the axle «dB-Lock®» noise and vibrations absorbing system
PRODUCT BENEFITS
Flange delivered mounted on the post Quick and easy to install «dB-Stop» noise and vibrations absorbing system
Système «dB-Lock®»
18
HANDRAILWITH TOASTING OR WITHOUT TRIM
SINGLE TWIST TOASTING
WITHOUT TRIM
Plastic-coated galvanized steel posts. Stainless steel rings welded to the posts every 50 cm. Rails made of plastic-coated galvanized steel or plastic-
coated aluminium. Trim: heavy-duty single twist wire mesh (4.4 mm),green
(RAL6005) or white (RAL9010). Delivered with accessories: toasting, sheathed cable,
hot dip galvanized fasteners, cable tie, stiffener N°4.
Height of the handrail: 1.10 m. Post and rails Ø 60 mm. Access for handrail without infill:
- Ø 55 mm sliding gate in Ø60 mm tube. Available from 1 to 3 meters. - Ø 60 mm swing gate with angle reinforcement bracket. Available in 1 and 3 meters.
PRODUCT BENEFITS
Non-rustable stainless ring. Low deformation of the 4.4 mm toasted wire. Low noise nuisance during the impact of balls
PRODUCT BENEFITS
Economical product Quick and easy to install
ENCL
OSUR
ES
19
« SPECIFIC »
Ø60 mm plastic-coated galvanized post, steel rail, height 1.10 m.
Electro galvanized welded U (plate thickness 40 mm). Trim:
- Full wood - Mixed: wood (lower part) / welded wire mesh fixed by dB-Stop (upper part) - Mixed: wood (lower part) / toasting single twist (upper part)
Plastic-coated galvanized handrail post Ø 60 mm, on welded mounting plate 150 x 150 mm (Ref. on request).
Triangular aluminium mounting plate for tube Ø 60 mm: - Made of primary aluminium. Ref. MC300320. - Made of plastic-coated aluminium. Ref. MC300325.
Handrail with collar attachment.Other colors than green RAL 6005, and white RAL 9010, available on request.
HOCKEY FIELD ENCLOSURES
POST ON MOUNTING PLATE
HANDRAIL WITH COLLAR ATTACHMENT
HANDRAIL
20
WITH WELDED WIRE MESH OR BAR PANELS
Dimensions: - Height: 1.10 m - 1 door leaf with a width 1 m, 1.5 m and 2 m. - 2 leaves for gate width 3 m and 4 m.
Gate description: - Round frame Ø 60 mm galvanized steel. - Anticorrosion treatment. - Panels filled with welded wire mesh, wire Ø 8/6/8 mm. - 180 ° opening, reversible hinges, steel bayonet. - Swing gate. - Lockable with a European canon.
Posts description: - 80 x 80 mm section, hot galvanized plastic-coated steel. - Handrail attached by half-round groove Ø 60 mm. - Anticorrosion treatment.
Dimensions: - Height 1.10 m and 2 m - 1 leaf gate with a width 1.5 m and 2 m - 2 leaves for gate width 3 m and 4 m
Gates: - Frame made of square 50x50 mm steel. - Panels filled with 40x20 mm bar panels. - 180° opening, reversible hinges, steel bayonet. - Swing gate. - Lockable with a European canon. - Anticorrosion treatment for doors and gates.
Posts:Gate height 1.10 m for handrail: - 80 x 80 mm section, hot galvanized plastic-coated steel. - Handrail attached by half-round groove Ø 60 mm.Doors height 2 m for ball-stop: - Square 100x100 mm section, plastic-coated steel.
WITH WELDED WIRE MESH
WITH BAR PANELS
GATES AND DOORS
PRODUCT BENEFIT
Possible custom made manufacture
DOOR: GREEN RAL 6005
GATE :WHITE, RAL9010
COLOR +
ENCL
OSUR
ES
21
PRODUCT BENEFITS
Easy and quick to install due to the stainless steel rings and welded plates. Post’s diameter adapted to the structure exposition and to the
trim type (screenbreak or toasting single twist).
Description : - Plastic-coated galvanized steel tubular posts Ø 50 to 102 mm. - Heights available: 3 m, 3.50 m and 4 m. - Post diameter depends on the height above ground, the spacing between the posts, and the presence of screens and windbreaks. - Straight sealing brace. - Standard spacing between posts: 3.60 m.
Filling: - Green plastic-coated toasting single twist 45 mm mesh.■ - Welded wire guides every 50 cm on the post.■ - Welded plates on end posts and corners.■ - Toasting available with wire Ø 1.9/2.4 mm or 2.4/2.9 mm.
2 versions:- Door with 1 leaf: Ref. CLTNPOR31- Door with 2 leaves: Ref. CLTNPOR32
Doors: - Frame made of 40x40 mm plastic-coated galvanized steel section. - Wire mesh door infill 45 mm wire Ø 4 mm. - Frame assembly by cutting welded tabs. - Cylindrical European barrel lock. - Possible integration of all types of locks. - Standard colors green 6005 with anticorrosion undercoat.
Frame: - 1 door version: Ø50 mm plastic-coated galvanized steel tube. - 2 doors versions: - 2 round Ø60 mm posts and 2 spacer bars Ø50 mm on the top and bottom part, galvanized and plastic-coated. - Welded plates for attaching the single twist wire mesh to the door. - 2 braces for attachment to the frame.
FENCING
TENNIS COURT DOORS
TENNIS FENCING
PRODUCT BENEFITS
Easy and quick installation. Anticorrosion treatment. 2 opening directions of the door.
GREEN, RAL6005
22
Description: - Tubular steel handrail diameter 60 mm, galvanized or
plastic-coated galvanized. - Total post height: 1.50 m and height above ground 1.10 m. - Spacing between posts: 2 m, 2.50 m and 3 m. - Handrail with assembled aluminium one piece or half- shells tees - Stainless steel rings to the post for installing the toasting.
COURT SEPARATION RAILS
Non-standard dimensions available on request.
TENNIS FENCING
Description: - Available height: 3 m. - 4 corners Ø 60 mm. - 8 braces Ø 50 mm. - 26 line posts Ø 60 mm. - 1 door 40x40 mm and 2 m x 1.20 m. - 6 rolls of FFT standard wire mesh. - RAL 6005 Standard - Structure trim: toasting single twist available with wire Ø 2.9 mm. Ref. TN080620
Description: - Windbreak: High-density polyethylene monofilament woven net. PVC tapes around the edge and eyelets every 50 cm.
- Screen: High-density polyethylene strip woven net. PVC tapes around the edge and eyelets every 30 cm.
Standard dimensions
Windbreak 50% 2m and 3m
Windbreak 65% 2m
Screenbreak 80% 1m, 1.2m, 1.5m, 1.8m, 2m, 3m
Screenbreak 95% 2m
TENNIS FENCING KIT
WINDBREAK AND SCREENBREAK
INFORMATIONS
- Marking possible on windbreak 65% (on request, please contact us).- Installation accessories available: attachment collars or metal S hooks.
GREEN, RAL6005
GREEN, RAL6005
GREEN, RAL6005
COLOR +
COLOR +