16 18 july 2018 pressure vessel training using … · pressure vessel design and vessel component...
TRANSCRIPT
W H O S H O U L D
A T T E N D
Design Engineers work-ing in the fields of boiler, pressure vessel and heat exchanger design and analysis; practicing vessel engineers requiring background on Code compliance and trends in vessel design. Existing and prospective PVELITE users.
G E N E R A L S C O P E
C O U R S E C O N T E N T
The basic theoretical background to
pressure vessel design and vessel
component analysis is covered, in-
cluding compliance with mechanical
codes. Training makes use of PVElite,
Codecalc and NozzlePro Software. A
discussion/ question/answer format is
also employed in order to maximize
retention of course material and the-
oretical concepts.
Some of the specific topics covered
are outlined below.
Chempute Software will provide training venue, computers, training dongles, printed training notes, teas, lunches, course certificate.
3 CPD points are awarded according to the ECSA Continuing Professional Development program. NB: Please bring a calculator to the course.
1 6— 1 8 J U L Y 2 0 1 8
P R E S S U R E V E S S E L T R A I N I N G U S I N G P V E L I T E
ASME VIII Div 1 Code overview ASME VIII Div 2 Code
Comparison of vessel codes* Flange Leakage
PD5500 Code Corrosion
Gaskets / Bolting Tall Vertical Towers
Welded Flat Heads Large Openings
Half-Pipe Jackets Wind and Seismic loads
Load combinations Welds
Fracture Mechanics Theory Control of Fracture
Thermal Stress WRC 449
Cones and Conical sections Flange Design and Analysis
Appendix 1-7 Large Nozzles
Skirt and base ring design
Internal pressure on shells and heads
External pressure on shells and heads
Support Legs, Support Lugs, Lifting Lugs
Nozzle reinforcement and Failure Path Calculations
Flanged and flued and metal bellows expansion joints
Heat Exchanger Floating Heads and Spherically dished covers
Horizontal Vessels on Saddle Supports Vibration Analysis
Heat Exchanger Tubesheets, including the TEMA fixed tubesheet requirements
Local Stresses / WRC107
Complete the registration form and fax it to 031 764 5934 or e-mail
through to [email protected].
Acknowledgement will be faxed or e-mailed back to you.
Final confirmation of your booking and all details of the course will be faxed or e-mailed to you only on receipt of full payment for the course.
Form to be completed by each delegate
By signing and returning this form, you will be registered on the
course and will be liable for payment. Please ensure that you have
proper authorisation to do this.
Cancellations are accepted in writing and without penalty up to 14
days prior to the start of the training.
Delegates cancelling in writing between 7 and 14 days prior to the start of the training will be liable for 25% of the training cost.
Delegates cancelling in writing less than 7 days prior to the start of the training will be liable for 50% of the training cost.
Full Payment needs to be received by Chempute Software prior to the training.
In case of insufficient delegates for the training, Chempute Software may cancel this course. In this case, registered delegates will be noti-fied, and any payments will be refunded.
H O W T O E N R O L
C O N D I T I O N S O F R E G I S T R A T I O N
P R E S E N T E R
Hans Ruff
Hans Ruff is of Swiss Nationali-
ty, and has spent the last 45
years in the fields of mechani-
cal design/draughting, welding,
design of road tankers, boilers,
pressure vessels, storage tanks,
and heat exchangers, and also
the inspection of pressurized
equipment.
He currently runs a consulting
business in Johannesburg
called SC&A Projects, and uses
PVELITE software program on a
regular basis.
D E L E G A T E S I N F O R M A T I O N :
Title: ______ Surname: _______________________ First Name:_______________________ Full Company Name: _______________________ Job Title: ________________________ Vat Registration Number: ______________________ Postal Address (to which invoice must be sent): _________________________________________________________________________________ _________________________________________ Code: __________ Tel: (_____)___________________Fax: (___)___________________Cell: ______________________ E-mail: ________________________________________ Special Dietary Requirements: ________________________________ Contact/Accounts Information: Title: ______ Surname: _______________________ First Name:________________________ Tel: (_____) _________________ Fax: (_____) __________________ E-mail: _______________________________________ Cost of Course: 1st Delegate R 9,900 + VAT 2nd / Additional Delegates from same Company less 10% I have read and agreed to all the conditions of enrolment and payment as stipulated in this registra-tion form: Signature: ___________________________ Date:___________________
C O U R S E N A M E D A T E S
Pressure Vessel & Heat Exchanger Design 16-18 July 2018
Using PVElite
T I M E S D U R A T I O N
8:00 a.m.—4:30 p.m. 3 Days
L O C A T I O N C P D P O I N T S
Chempute Software / Unit G14 3 – (SAIMechE 1033-01/20)
Pinewood Office Park, Pinewood Square,
33 Riley road,
Woodmead, Sandton
D I R E C T I O N S T O T H E V E N U E :
Chempute Software, Unit G14, Pinewood Square, Pinewood Office Park,
33 Riley road, Woodmead, Sandton
Telephone: 031 764 6840 / 011 803 6559 for directions.
D I R E C T I O N S F R O M P R E T O R I A :
Get on N1 from Francis Baard St/N4 and Exit 145 Take N1
Continue on N1. Drive from Pretoria Main Rd to Sandton.
Take exit 100-Sandton from N1 Western Bypass
Use the right lane to merge onto Rivonia Rd/M9
Use the right 2 lanes to turn right onto Witkoppen Rd
Turn right onto Bowling Ave
Turn left at the 1st cross street onto Riley Rd
D I R E C T I O N S F R O M J O H A N N E S B U R G :
Take M31 and Houghton Dr to De Villiers Graaff Motorway/M1
Follow De Villiers Graaff Motorway/M1 to Woodmead Dr/R55 in Sandton. Take exit 29 from De Villiers Graaff Motorway/M1
Use the left 2 lanes to turn left onto Woodlands Dr
Turn right onto Lincoln St
Turn left onto Plymouth St
Plymouth St turns right and becomes Hillman St
Continue onto Riley Rd