16620y

CLASS 16620Y

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 1 ISSUE DATE: APRIL 2013 Design limits

Temperature (°C) -45

-50 0 50 75 100 125 150

Pressure (Bar ga) DN 15- 150 450

20.0 20.0 19.5 18.6 17.7 16.7 15.8

DN 500- 600 19.6 19.6 19.2 18.4 17.7 16.7 15.8 Table of schedules

DN Schedule

15 40S 20 40S 25 10S 40 10S 50 10S 80 10S

100 10S 150 10S 200 20 10S ALL EXCEPT WNFL 200 60 Note 1 WNFL 250 20 10S ALL EXCEPT WNFL 250 60 Note 1 WNFL 300 20 10S ALL EXCEPT WNFL 300 40 Note 1 WNFL 350 20 10S ALL EXCEPT WNFL 350 40 Note 1 WNFL 400 20 10S ALL EXCEPT WNFL 400 30 Note 1 WNFL 450 20 10S ALL EXCEPT WNFL 450 30 Note 1 WNFL 500 20 600 20

Alloy 825/ 625 LT Sour (16620Y) Plant Ghaba North Class no. 16620Y Consignee PDO ASME rating CLASS 150 Engineered by STST Corrosion allowance 0 mm Principal PDO Revision letter 032 Contr. job no. - Revision date 02/2013 Project no. 13265

Notes

- DN 15-100 150: Design limits acc. to ASME B16.5 flange rating mat. grp 3.8, and limited by allowable stress of bolting material

- DN 150 200-600: Design limits acc. to ASME B16.5 flange rating mat. grp 1.1, and limited by allowable stress of bolting material

- For basis of design see DEP 31.38.01.10-Gen. - Piping class contains a combination of solid and carbon steel with clad material - Use of coated bolt sets should be considered when exposed to marine environments. - The use of red. bore ball valves is considered most economical. Use full bore ball valves only when necessary for

process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their

functionality

“Y” stands for following changes : - In this Project specific Piping Class all Pipe and Pipe fittings, Reducing pipe fittings 1/2” (DN 15) to 6”

(DN 150) made of solid Incoloy 825 and are added from DEP 31.38.01.15 Class ep 16620 rev. A, 8” (DN 200) to 18” (DN 450) made of solid Incoloy 825 and 20” (DN 500) to 24” (DN 600) made of CS base material with weld overlay Inconel 625 clad are added from DEP 31.38.01.15 Class ep 16520 rev. A.

- 9.5mm minimum thickness of backing material (CS) shall be considered for all 625 weld overlay pipes, fittings and flanges.

- In this Project specific Piping Class all valves, flanges and blind flanges from 1/2” (DN 15) to 6” (DN 150) are made of solid Incoloy 825 and added from DEP 31.38.01.15 class ep16620 rev. A, 8’’ (200DN) to 24” (DN 600) are made of CS base material with weld overlay Inconel 625 clad and added from DEP 31.38.01.15 Class ep 16520 rev. A.

- Lap joint flanges, Orifice flanges, Spades, Spacer rings, Spectacle blind, Instruments and Miscellaneous from ½” (DN 15) to 24”(DN 600) are made of solid Incoloy 825 and added from DEP 31.38.01.15 Class ep 16620 rev. A.

- All Gaskets, stud bolt and nuts are included from DEP 31.38.01.15 Class ep 16620 rev. A, for flange joint with both flanges of CS with Alloy 625 weld overlay stud bolt and nuts with material ASTM A320-L7M/A194-7M shall be used, for flanges either on both side joints with solid Alloy 825 or in combination with one side flange of Alloy 825 solid and CS with alloy 625 weld overlay stud bolt and nuts with material ASTM A320-L7M/A194-7M Zn-Ni Electro pl + PTFE top coat shall be used.

- Wherever MESC no. of piping components are not available it is followed as ABXXXXXXXX, where AB is the same no. from MESC for the respective piping components category.

- The CRA lining (Inconel 625) weld overlaid with CS backup material shall be acceptable. - For CRA lining (Inconel 625) weld overlaid pipe, requirement of weld overlay to be clearly mark on pipe

spool in construction Isometrics. - Cladding through weld overlay of incoloy 825 is not acceptable, Weld overlay cladding shall be only by

Inconel 625 welding. - The CRA clad pipe shall comply with the requirements of DEP 31.40.20.32 and API 5LD. - This project specific piping class is restricted for temperature upto - 45 Deg C as the base material is

LTCS for cladding. - The CRA clad shall also meet the requirements of ASTM A265. - Bolt length is revised by considering 3 mm extra weld overlay cladding on flange face for each flange

size 8” (DN 200) and above. - Orifice flanges shall be made of solid Alloy 825 for all sizes with pressure rating 300# and thickness shall

be same as pipe - For all CS with Inconel 625 weld overlay 10% Iron dilution is acceptable. - Solid Alloy 825 Drip Ring assembly for size DN 50 and DN80 is added in the spec. - Stiffeners to be provided for branch connections below DN 50 Note 1 – Schedule shall be applicable only for cladded flanges to marked sizes.

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 2 ISSUE DATE: APRIL 2013 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

600 -C -C -C -C E E E E E E B B B B B A 500 -C -C -C -C E E E E E E B B B B A 450 -C -C -C -C E E E E E B B B B A 400 -C -C -C -C E E E E E B B B A 350 -C -C -C -C E E E E B B B A 300 -C -C -C -C E E E B B B A 250 -C -C -C -C E E B B B A 200 -C -C -C -C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A

Code Explanation of characters

- Not applicable A Equal tee B Reducing tee C Branch fitting E Branch outlet

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 3 ISSUE DATE: APRIL 2013 COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.)

Pipe

PIPE Pipe DN 15-100 ASTM B423 UNS N08825

PIPE Pipe DN 150- 450 ASTM B474 Cl 1,3 UNS N08825

PIPE Pipe DN 200-600 ASTM A333-6/A671-CC65 cl 22 + Clad UNS N08825

PIPE Pipe DN 500-600 ASTM A333-6 + Clad UNS N06625

Flanges

BLFL Blind flange DN 15-150 ASTM B564 UNS N08825

BLFL Blind flange DN 200-600 ASTM A350-LF2 cl 1 + Clad UNS N08825


LJFL Lap joint flange --- ASTM B564 UNS N08825

SBFL Spectacle blind DN 15-400 ASTM B564/B424 UNS N08825

SPFL Spade DN 15-600 ASTM B564/B424 UNS N08825 SPRT Spacer ring DN 15-600 ASTM B564/B424 UNS N08825 WNFL Welding neck flange DN 15-150 ASTM B564 UNS N08825 WNFL Welding neck flange DN 200-600 ASTM A350-LF2 cl 1 + Clad UNS N08825 WNFL Welding neck flange DN 200-600 ASTM A350-LF2 cl 1 + Clad UNS N06625 WNFF Welding neck flange-flat face DN 50-100 ASTM B564 UNS N08825 DRIP Drip Ring DN 50-80 ASTM B564 UNS N08825

Fittings

CAPB Cap bw DN 15-150 450 ASTM B366-WPNICMC

CAPB Cap bw DN 200-600 ASTM A420-WPL6 + Clad UNS N08825


E45B Elbow 45 deg LR bw DN 15-150 450 ASTM B366-WPNICMC

E45B Elbow 45 deg LR bw DN 200-600 ASTM A420-WPL6 + Clad UNS N08825


E90B Elbow 90 deg LR bw DN 15-150 450 ASTM B366-WPNICMC E90B Elbow 90 deg LR bw DN 200-600 ASTM A420-WPL6 + Clad UNS N08825 E90B Elbow 90 deg LR bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625 TEEB Tee equal bw DN 15-150 450 ASTM B366-WPNICMC TEEB Tee equal bw DN 200-600 ASTM A420-WPL6 + Clad UNS N08825 TEEB Tee equal bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625

Reducing fittings

BNIP Branch fitting plain DN 15-40 ASTM B564 UNS N08825

BNLF Branch fitt light-weight flgd DN 15-40 ASTM B564 UNS N08825

BROB Branch outlet bw DN 150-600 ASTM B564 UNS N08825

BROB Branch outlet bw DN 400-600 ASTM A350-LF2 cl 1 + Clad UNS N08825

RECB DN 20-350 600 ASTM B366-WPNICMC RECB Reducer concentric bw DN 250-600 ASTM A420-WPL6 + Clad UNS N08825 RECB Reducer concentric bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625 REEB Reducer eccentric bw DN 20-600 ASTM B366-WPNICMC REEB Reducer eccentric bw DN 250-600 ASTM A420-WPL6 + Clad UNS N08825 REEB Reducer eccentric bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625 TERB Tee reducing bw DN 20-300 600 ASTM B366-WPNICMC TERB Tee reducing bw DN 250-600 ASTM A420-WPL6 + Clad UNS N08825 TERB Tee reducing bw DN 600 ASTM A420-WPL6 + Clad UNS N06625

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 4 ISSUE DATE: APRIL 2013 Pipe

PIPE Pipe DN 15-100 ASTM B423 UNS N08825

PIPE Pipe DN 150- 450 ASTM B474 Cl 1,3 UNS N08825

PIPE Pipe DN 200-600 ASTM A333-6/A671-CC65 cl 22 + Clad UNS N08825

PIPE Pipe DN 500-600 ASTM A333-6 + Clad UNS N06625

Flanges

BLFL Blind flange DN 15-150 ASTM B564 UNS N08825



LJFL Lap joint flange --- ASTM B564 UNS N08825

SBFL Spectacle blind DN 15-400 ASTM B424 UNS N08825

SPFL Spade DN 15-600 ASTM B424 UNS N08825 SPRT Spacer ring DN 15-600 ASTM B424 UNS N08825 WNFL Welding neck flange DN 15-150 ASTM B564 UNS N08825 WNFL Welding neck flange DN 200-600 ASTM A350-LF2 cl 1 + Clad UNS N08825 WNFL Welding neck flange DN 200-600 ASTM A350-LF2 cl 1 + Clad UNS N06625 DRIP Drip Ring DN 50-80 ASTM B564 UNS N08825 Fittings

CAPB Cap bw DN 15-150 450 ASTM B366-WPNICMC



E45B Elbow 45 deg LR bw DN 15-150 450 ASTM B366-WPNICMC



E90B Elbow 90 deg LR bw DN 15-150 450 ASTM B366-WPNICMC E90B Elbow 90 deg LR bw DN 200-600 ASTM A420-WPL6 + Clad UNS N08825 E90B Elbow 90 deg LR bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625 TEEB Tee equal bw DN 15-150 450 ASTM B366-WPNICMC TEEB Tee equal bw DN 200-600 ASTM A420-WPL6 + Clad UNS N08825 TEEB Tee equal bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625 Reducing fittings

BNIP Branch fitting plain DN 15-40 ASTM B564 UNS N08825

BNLF Branch fitt light-weight flgd DN 15-40 ASTM B564 UNS N08825

BROB Branch outlet bw DN 150-600 ASTM B564 UNS N08825

BROB Branch outlet bw DN 400-600 ASTM A350-LF2 cl 1 + Clad UNS N08825

RECB DN 20-350 600 ASTM B366-WPNICMC RECB Reducer concentric bw DN 250-600 ASTM A420-WPL6 + Clad UNS N08825 RECB Reducer concentric bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625 REEB Reducer eccentric bw DN 20-600 ASTM B366-WPNICMC REEB Reducer eccentric bw DN 250-600 ASTM A420-WPL6 + Clad UNS N08825 REEB Reducer eccentric bw DN 500-600 ASTM A420-WPL6 + Clad UNS N06625 TERB Tee reducing bw DN 20-300 600 ASTM B366-WPNICMC TERB Tee reducing bw DN 250-600 ASTM A420-WPL6 + Clad UNS N08825 TERB Tee reducing bw DN 600 ASTM A420-WPL6 + Clad UNS N06625

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 5 ISSUE DATE: APRIL 2013 Valves BAFF Ball valve float FB flgd DN 15-150 Body: ASTM B564 UNS

N08825/A494-CU5MCUC Trim: Alloy 825, PTFE BARF Ball valve float RB flgd DN 15-150 Body: ASTM B564 UNS

N08825/A494-CU5MCUC Trim: Alloy 825, PTFE BARF Ball valve float RB flgd DN 200-250 Body: ASTM A352-LCC + Clad UNS N06625 Trim: Alloy 625, PTFE BTFF Ball valve trunn FB flgd DN 200-600 Body: ASTM A352-LCC + Clad UNS N06625 Trim: Alloy 625, filled PTFE BTRF Ball valve trunn RB flgd DN 300-600 Body: ASTM A352-LCC + Clad UNS N06625 Trim: Alloy 625, filled PTFE CHDF Check valve dual plate flgd DN 300-600 Body: ASTM A352-LCC + Clad UNS N06625 Trim: Alloy 625 CHVF Check valve flgd DN 15-150 Body: ASTM B564 UNS

N08825/A494-CU5MCUC Trim: Alloy 825 CHNF Check valve flgd Non SlamType DN 15-150 Body: ASTM B564 UNS

N08825/A494-CU5MCUC Trim: Alloy 825 CHVF Check valve flgd DN 200-600 Body: ASTM A352-LCC + Clad UNS N06625 Trim: Alloy 625 GABF Gate valve bellows seal flgd DN 15-40 Body: ASTM B564 UNS N08825 Trim: Alloy 825 GAVF Gate valve flgd DN 200-600 Body: ASTM A352-LCC + Clad UNS N06625 Trim: Alloy 625 GAVF Gate valve flgd DN 50-150 Body: ASTM B564 UNS

N08825/A494-CU5MCUC Trim: Alloy 825 GLBF Globe valve bellows seal flgd DN 15-40 Body: ASTM B564 UNS N08825 Trim: Alloy 825 GLVF Globe valve flgd DN 200-200 Body: ASTM A352-LCC + Clad UNS N06625 Trim: Alloy 625 GLVF Globe valve flgd DN 50-150 Body: ASTM B564 UNS

N08825/A494-CU5MCUC Trim: Alloy 825 VDBN Monofl ball double bl & bl NPT DN 15 - 50 Body: ASTM B564 UNS N08825 Trim: Alloy 825, PTFE

VDFF Both side Flgd ball double bl & bl DN 50-80 Body: ASTM B564 UNS N08825 Trim: Alloy 825, PTFE Instruments

TWND Thermowell flgd DN 40 DN 40-40 ASTM B564 UNS N08825

TWNL Thermowell flgd DN 40 L=255 mm --- ASTM B564 UNS N08825

TWNS Thermowell flgd DN 40 L=230 mm --- ASTM B564 UNS N08825

Miscellaneous GKSW Gasket spiral wound DN 15-600 Alloy 825, Graphite

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 6 ISSUE DATE: APRIL 2013 CS centring ring/Alloy 825 inner ring MTRR Meterrun DN 15-40 Alloy 825 ORFS Orifice flange set DN 50-600 ASTM B564 UNS N08825 STB1 Studbolt with nuts --- ASTM A320-L7M/A194-7M Zn-Ni Electro pl + PTFE top coat STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M STYB Strainer Y-type DN 50-400 Sieve: Alloy 825

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 7 ISSUE DATE: APRIL 2013 PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC

Pipe Pipe 747861 0181 0261 0331 0491 0571 0651 0751 Pipe 747861 Pipe 74XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

Pipe 749100 1041 1281 1531 1821 2141 2451 2751 3051 Pipe 74XXXX XXXX XXXX

Fittings Cap bw 762817 0361 0461 0541 0741 0841 1041 1241 1441 Cap bw 762817 1541 1641 1741 Cap bw 76XXXX XXXX XXXX XXXX Cap bw 769112 1041 1281 1521 1821 2141 2451 2751 3051 Cap bw 769112 6081 6381 Elbow 45 deg LR bw 762837 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 45 deg LR bw 762837 1541 1641 1741 Elbow 45 deg LR bw 76XXXX XXXX XXXX XXXX Elbow 45 deg LR bw 769117 1041 1281 1521 1821 2141 2451 2751 3051 Elbow 45 deg LR bw 769117 6081 6381 Elbow 90 deg LR bw 762842 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 90 deg LR bw 762842 1541 1641 1741 Elbow 90 deg LR bw 76XXXX XXXX XXXX XXXX Elbow 90 deg LR bw 769122 1041 1281 1521 1821 2141 2451 2751 3051 Elbow 90 deg LR bw 769122 6081 6381 Tee equal bw 762887 0361 0461 0541 0741 0841 1041 1241 1441 Tee equal bw 762887 1541 1641 1741 Tee equal bw 76XXXX XXXX XXXX XXXX Tee equal bw 769183 1041 1281 1521 1821 2141 2451 2751 3051 Tee equal bw 769183 6081 6381

Flanges Blind flange 766000 0011 0021 0031 0041 0051 0061 0071 0081 Blind flange 769127 0091 0101 0111 0121 0131 0141 0151 0161 Blind flange 769127 1091 1101 1111 1121 1131 1141 1151 1161 Spacer ring 768820 8021 8031 8041 8051 8061 8071 8081 8091 8101 8111 8121 8131 8141 8151 8161 8171 Spade 768899 0021 0031 0041 0051 0061 0071 0081 0091 0101 0111 0121 0131 0141 0151 0161 0171 Spectacle blind 768825 0021 0031 0041 0051 0061 0071 0081 0091 0101 0111 0121 0131 0141 Welding neck flange 766078 0221 0231 0031 0051 0061 0081 0101 0121 Welding neck flange 769140 0011 0021 0031 0041 0051 0061 0071 0091 Welding neck flange 76XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

Welding neck flange-flat face 76XXXX XXXX XXXX

Drip Ring 76XXXX XXXX XXXX

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 8 ISSUE DATE: APRIL 2013

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 9 ISSUE DATE: APRIL 2013 PIPING COMPONENTS

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 10 ISSUE DATE: APRIL 2013 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC

Pipe Pipe 747861 0181 0261 0331 0491 0571 0651 0751 Pipe 747861 Pipe 74XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

Pipe 749100 1041 1281 1531 1821 2141 2451 2751 3051 Pipe 74XXXX XXXX XXXX

Fittings Cap bw 762817 0361 0461 0541 0741 0841 1041 1241 1441 Cap bw 762817 1541 1641 1741 Cap bw 76XXXX XXXX XXXX XXXX Cap bw 769112 1041 1281 1521 1821 2141 2451 2751 3051 Cap bw 769112 6081 6381 Elbow 45 deg LR bw 762837 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 45 deg LR bw 762837 1541 1641 1741 Elbow 45 deg LR bw 76XXXX XXXX XXXX XXXX Elbow 45 deg LR bw 769117 1041 1281 1521 1821 2141 2451 2751 3051 Elbow 45 deg LR bw 769117 6081 6381 Elbow 90 deg LR bw 762842 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 90 deg LR bw 762842 1541 1641 1741 Elbow 90 deg LR bw 76XXXX XXXX XXXX XXXX Elbow 90 deg LR bw 769122 1041 1281 1521 1821 2141 2451 2751 3051 Elbow 90 deg LR bw 769122 6081 6381 Tee equal bw 762887 0361 0461 0541 0741 0841 1041 1241 1441 Tee equal bw 762887 1541 1641 1741 Tee equal bw 76XXXX XXXX XXXX XXXX Tee equal bw 769183 1041 1281 1521 1821 2141 2451 2751 3051 Tee equal bw 769183 6081 6381

Flanges Blind flange 766000 0011 0021 0031 0041 0051 0061 0071 0081 Blind flange 769127 0091 0101 0111 0121 0131 0141 0151 0161 Blind flange 769127 1091 1101 1111 1121 1131 1141 1151 1161 Spacer ring 768820 8021 8031 8041 8051 8061 8071 8081 8091 8101 8111 8121 8131 8141 8151 8161 8171 Spade 768899 0021 0031 0041 0051 0061 0071 0081 0091 0101 0111 0121 0131 0141 0151 0161 0171 Spectacle blind 768825 0021 0031 0041 0051 0061 0071 0081 0091 0101 0111 0121 0131 0141 Welding neck flange 766078 0221 0231 0031 0051 0061 0081 0101 0121 Welding neck flange 769140 0011 0021 0031 0041 0051 0061 0071 0091 Welding neck flange 76XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

Drip Ring 76XXXX XXXX XXXX

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 11 ISSUE DATE: APRIL 2013 PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC

Valves Ball valve float FB flgd 770654 5031 5041 5051 5071 5081 5101 5121 5131 Ball valve float RB flgd 770222 0151 0161 Ball valve float RB flgd 770654 0031 0041 0051 0071 0081 0101 0121 0131 Ball valve trunn FB flgd 770089 5151 5161 5171 5181 5191 5201 5211 5231 Ball valve trunn RB flgd 770089 0171 0181 0191 0201 0211 0231 Check valve dual plate flgd 776723 0171 0181 0191 0201 0211 0231 Check valve flgd 771052 0151 0161 0171 0181 0191 0201 0211 0231 Check valve flgd 771640 0031 0041 0051 0071 0081 0101 0121 0141 Check valve flgd non slam type 77XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Gate valve bellows seal flgd 772640 0031 0041 0051 0071 Gate valve flgd 772055 0151 0161 0171 0181 0191 0201 0211 0231 Gate valve flgd 772640 3081 3101 3121 3141 Globe valve bellows seal flgd 773640 0031 0041 0051 0071 Globe valve flgd 773052 0151 Globe valve flgd 773640 3081 3131 3121 3141 Monofl ball double bl & bl NPT 778568 6531 Monofl ball double block NPT 778568 2531 Monofl ball double bl & bl NPT 77XXXX XXXX XXXX Both side flgd ball double bl & bl 77XXXX XXXX XXXX Miscellaneous Gasket spiral wound 854360 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3421 Meterrun 766496 1521 1541 1561 1581 Orifice flange set 766096 1011 1021 0011 0021 0111 0121 0131 0141 0151 0161 0171 0181 Orifice flange set 76XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX Strainer Y-type 768307 0011 0021 0031 0041 0101 0111 0121 0131 0141

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 12 ISSUE DATE: APRIL 2013 REDUCING/PIPING COMPONENTS

DOC. NO. 13265-00/2988001 CLASS 16620Y, REV.023 PAGE 13 ISSUE DATE: APRIL 2013 Run x Br BROB RECB REEB TERB

20 x 15 7628670661 7628750661 7628926181 25 x 15 7628670791 7628750791 7628926321 25 x 20 7628670891 7628750891 7628926371 40 x 15 7628670991 7628750991 40 x 20 7628671191 7628751191 7628926471 40 x 25 7628671241 7628751241 7628926721 50 x 20 7628671311 7628751311 50 x 25 7628671341 7628751341 7628926771 50 x 40 7628671441 7628751441 7628926831 80 x 40 7628671741 7628751741 80 x 50 7628671841 7628751841 7628926891

100 x 40 7628671941 7628751941 100 x 50 7628672041 7628752041 7628926921 100 x 80 7628672141 7628752141 7628926961 150 x 50 7677350071 150 x 80 7628672441 7628752441 7628926981 150 x 100 7628672541 7628752541 7628927021 200 x 50 7677350781 200 x 80 7677350881 200 x 100 76XXXXXXXX 76XXXXXXXX 76XXXXXXXX

200 x 150 76XXXXXXXX 76XXXXXXXX 76XXXXXXXX

250 x 50 7677350791 250 x 80 7677350891 250 x 100 76XXXXXXXX 76XXXXXXXX 76XXXXXXXX



300 x 50 7677350801 300 x 80 7677350901 300 x 100 7677350991 300 x 150 76XXXXXXXX 76XXXXXXXX 76XXXXXXXX



350 x 50 7677350811 350 x 80 7677350911 350 x 100 7677351001 350 x 150 7677351081 76XXXXXXXX 76XXXXXXXX




Comp.name Description

BNIP Branch fitting plain BNLF Branch fitt light-weight flgd BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw

Run x Br BROB RECB REEB TERB

400 x 50 7677350821 400 x 80 7677350921 400 x 100 7677351011 400 x 150 7677351091 400 x 200 76XXXXXXXX 76XXXXXXXX 76XXXXXXXX




450 x 50 7677350831 450 x 80 7677350931 450 x 100 7677351021 450 x 150 7677351101 450 x 200 76XXXXXXXX





500 x 50 7677350841 500 x 80 7677350941 500 x 100 7677351031 500 x 150 7677351111 500 x 200 76XXXXXXXX

500 x 250 76XXXXXXXX 500 x 300 76XXXXXXXX 76XXXXXXXX 76XXXXXXXX




600 x 50 7677350851 600 x 80 7677350951 600 x 100 7677351041 600 x 150 7677351121 600 x 200 76XXXXXXXX

600 x 250 76XXXXXXXX





600 x 500 7691529781 7691639781 7691899781

Thermowell flgd DN 40 Length MESC number

230 7683371811 255 7683371821 305 7683371831 355 7683371841 405 7683371851 455 7683371861

Branch Run pipe BNIP BNLF

15 40 - 40 7680306021 7680543511 15 50 - 50 7680306031 7680543521 15 80 - 200 7680306041 7680543531 15 250 - 600 7680306051 7680543541 20 50 - 50 7680306061 7680543561 20 80 - 100 7680306071 7680543571 20 150 - 300 7680306081 7680543581 20 350 - 600 7680306091 7680543591 25 80 - 80 7680306111 7680543611 25 100 - 100 7680306121 7680543621 25 150 - 250 7680306131 7680543631 25 300 - 600 7680306141 7680543641 40 80 - 80 7680306161 7680543661 40 100 - 100 7680306171 7680543671 40 150 - 150 7680306181 7680543681 40 200 - 300 7680306191 7680543691 40 350 - 600 7680306201 7680543701

DOC. NO. 13265-00/2988001 Class 16620Y, rev.01 page 14 Issue date: December 2012

BOLTING

Coated boltset std flange DN nr inch x mm MESC number

15 4 1/2 x 60 8138270231 20 4 1/2 x 70 8138270251 25 4 1/2 x 70 8138270251 40 4 1/2 x 80 8138270271 50 4 5/8 x 90 8138270751 80 4 5/8 x 100 8138270771 100 8 5/8 x 100 8138270771 150 8 3/4 x 110 8138271431 200 8 3/4 x 110 8138271431 250 12 7/8 x 120 8138272161 300 12 7/8 x 120 8138272161 350 12 1 x 140 8138272991 400 16 1 x 140 8138272991 450 16 1 1/8 x 150 8138273841 500 20 1 1/8 x 160 8138273861 600 20 1 1/4 x 180 8138274701

Std boltset standard flg DN nr inch x mm MESC number

15 4 1/2 x 60 8138671531 20 4 1/2 x 70 8138671551 25 4 1/2 x 70 8138671551 40 4 1/2 x 80 8138671571 50 4 5/8 x 90 8138672711 80 4 5/8 x 100 8138672731 100 8 5/8 x 100 8138672731 150 8 3/4 x 110 8138673301 200 8 3/4 x 110 8138673301 200 8 3/4 x 120 8138673321 250 12 7/8 x 120 8138674011 250 12 7/8 x 130 8138674031 300 12 7/8 x 120 8138674011 300 12 7/8 x 130 8138674031 350 12 1 x 140 8138674691 350 12 1 x 150 8138674711 400 16 1 x 140 8138674691 400 16 1 x 140 8138674691 450 16 1 1/8 x 150 8138675291 450 16 1 1/8 x 160 8138675301 500 20 1 1/8 x 160 8138675301 500 20 1 1/8 x 170 8138675321 600 20 1 1/4 x 180 8138675901 600 20 1 1/4 x 190 8138675921 Coated boltset mrun flg DN nr inch x mm MESC number

15 4 5/8 x 130 8138270831 20 4 5/8 x 130 8138270831 25 4 5/8 x 130 8138270831 40 4 3/4 x 140 8138271491

Coated boltset orificeflg DN nr inch x mm MESC number

50 8 5/8 x 130 8138270831 80 8 3/4 x 140 8138271491 100 8 3/4 x 150 8138271511 150 12 3/4 x 150 8138271511 200 12 7/8 x 170 8138272261 250 16 1 x 190 8138273091 300 16 1 1/8 x 210 8138273961 350 20 1 1/8 x 220 8138273981 400 20 1 1/4 x 230 8138274801 450 24 1 1/4 x 250 8138274841 500 24 1 1/4 x 260 8138274861 600 24 1 1/2 x 290 8138276411 Std boltset orifice flg DN nr inch x mm MESC number

50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091 250 16 1 x 190 8138674771 300 16 1 1/8 x 210 8138675381 350 20 1 1/8 x 220 8138675401 400 20 1 1/4 x 230 8138675981 450 24 1 1/4 x 250 8138676061 500 24 1 1/4 x 260 8138676031 600 24 1 1/2 x 290 8138676901 Coated boltset blind/spc DN nr inch x mm MESC number

15 4 1/2 x 70 8138270251 20 4 1/2 x 80 8138270271 25 4 1/2 x 80 8138270271 40 4 1/2 x 80 8138270271 50 4 5/8 x 100 8138270771 80 4 5/8 x 110 8138270791 100 8 5/8 x 110 8138270791 150 8 3/4 x 120 8138271451 200 8 3/4 x 130 8138271471 200 8 3/4 x 140 8138271491 250 12 7/8 x 140 8138272201 250 12 7/8 x 150 8138272221 300 12 7/8 x 150 8138272221 300 12 7/8 x 160 8138272241 350 12 1 x 160 8138273031 350 12 1 x 170 8138273051 400 16 1 x 170 8138273051 400 16 1 x 180 8138273071 450 16 1 1/8 x 180 8138273901 450 16 1 1/8 x 190 8138273921 500 20 1 1/8 x 200 8138273941 500 20 1 1/8 x 210 8138273961 600 20 1 1/4 x 220 8138274781 600 20 1 1/4 x 230 8138274801

Std boltset orifice flg DN nr inch x mm MESC number

50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091 250 16 1 x 190 8138674771 300 16 1 1/8 x 210 8138675381 350 20 1 1/8 x 220 8138675401 400 20 1 1/4 x 230 8138675981 450 24 1 1/4 x 250 8138676061 500 24 1 1/4 x 260 8138676031 600 24 1 1/2 x 290 8138676901

Std boltset blind/spacer DN nr inch x mm MESC number

15 4 1/2 x 70 8138671551 20 4 1/2 x 80 8138671571 25 4 1/2 x 80 8138671571 40 4 1/2 x 80 8138671571 50 4 5/8 x 100 8138672731 80 4 5/8 x 110 8138672741 100 8 5/8 x 110 8138672741 150 8 3/4 x 120 8138673321 200 8 3/4 x 130 8138673341 250 12 7/8 x 140 8138674041 300 12 7/8 x 150 8138674061 350 12 1 x 160 8138674721 400 16 1 x 170 8138674741 450 16 1 1/8 x 180 8138675331 500 20 1 1/8 x 200 8138675441 500 20 1 1/8 x 210 8138675381 600 20 1 1/4 x 220 8138675971 600 20 1 1/4 x 230 8138675981

Std boltset mrun flg. DN nr inch x mm MESC number

15 4 5/8 x 130 8138672781 20 4 5/8 x 130 8138672781 25 4 5/8 x 130 8138672781 40 4 3/4 x 140 8138673351

Coated boltset orificeflg DN nr inch x mm MESC number

50 8 5/8 x 130 8138270831 80 8 3/4 x 140 8138271491 100 8 3/4 x 150 8138271511 150 12 3/4 x 150 8138271511 200 12 7/8 x 170 8138272261 250 16 1 x 190 8138273091 300 16 1 1/8 x 210 8138273961 350 20 1 1/8 x 220 8138273981 400 20 1 1/4 x 230 8138274801 450 24 1 1/4 x 250 8138274841 500 24 1 1/4 x 260 8138274861 600 24 1 1/2 x 290 8138276411


ASSEMBLIES Drain or vent point DN 15 Fig.I DN15 - 15 Branch: according to branch table Blind flange 1 7660000011 Gasket spiral wound 1 8543603041 Welding neck flange 1 7660780221 Studbolt with nuts 4 8138671531 8138270231 Drain or vent point DN 20 Fig.I DN20 - 40 Branch: according to branch table Blind flange 1 7660000021 Gasket spiral wound 1 8543603061 Welding neck flange 1 7660780231 Studbolt with nuts 4 8138671551 8138270251 Drain or vent point DN 20 Fig.H DN50 - 50 Branch: branch nipple flanged Blind flange 1 7660000021 Gasket spiral wound 1 8543603061 Studbolt with nuts 4 8138671551 8138270251 Drain or vent point DN 25 Fig.H DN80 - 300 Branch: branch nipple flanged Blind flange 1 7660000031 Gasket spiral wound 1 8543603081 Studbolt with nuts 4 8138671551 8138270251 Drain or vent point DN 40 Fig.H DN350 - 600 Branch: branch nipple flanged Blind flange 1 7660000041 Gasket spiral wound 1 8543603121 Studbolt with nuts 4 8138671571 8138270271 ASSEMBLIES Meter run connection DN 15 Fig.AA DN15 - 40 Branch: not applicable Gasket spiral wound 2 8543603041 Monofl ball double block NPT 2 7785682531 Studbolt with nuts 8 8138671531 8138270231

Orifice connection DN 15 Fig.AB DN50 - 600 Branch: not applicable Gasket spiral wound 2 8543603041 Welding neck flange 2 7660780221 Monofl ball double block NPT 2 7785682531 77XXXXXXXX Studbolt with nuts 8 8138671531 8138270231 Pressure instr conn DN 15 Fig.AB DN15 - 40 Branch: according to branch table Gasket spiral wound 1 8543603041 Welding neck flange 1 7660780221 Monofl ball double block NPT 1 7785682531 Studbolt with nuts 8 8138671531 Pressure instr conn DN 15 50 Fig.AA DN50 - 600 Branch: branch nipple flanged According to branch table.

Gasket spiral wound 1 8543603041 Monofl ball double block NPT 1 7785682531 Studbolt with nuts 8 8138671531 Gasket spiral wound 1 8543603141 Welding neck flange 1 7660780061 Monofl ball double bl & bl NPT 1 77XXXXXXXX Studbolt with nuts 8 8138270751 Temp instr conn DN 40 Fig.NS DN80 - 100 Branch: branch nipple flanged Thermowell flgd DN 40 L=230 mm 1 7683371811 Gasket spiral wound 1 8543603121 Lap joint flange 1 7660240041 Studbolt with nuts 4 8138671591 8138270271 Temp instr conn DN 40 Fig.NL DN150 - 600 Branch: branch nipple flanged Thermowell flgd DN 40 L=255 mm 1 7683371821 Gasket spiral wound 1 8543603121 Lap joint flange 1 7660240041 Studbolt with nuts 4 8138671591 Drip Ring Assembly DN 50

8138270271

Drip Ring 1 76XXXXXXXX Branch fitt light-weight flgd 2 7680543531 Drip Ring Assembly DN 80 Drip Ring 1 76XXXXXXXX Branch fitt light-weight flgd 2 7680543531


Drain or vent point DN 15 Fig.I DN15 - 15 Branch: according to branch table Blind flange 1 7660000011 Gasket spiral wound 1 8543603041 Welding neck flange 1 7660780221 Studbolt with nuts 4 8138671531 8138270231 Drain or vent point DN 20 Fig.H DN50 - 50 Branch: branch nipple flanged Blind flange 1 7660000021 Gasket spiral wound 1 8543603061 Studbolt with nuts 4 8138671551 8138270251 Drain or vent point DN 25 Fig.H DN80 - 300 Branch: branch nipple flanged Blind flange 1 7660000031 Gasket spiral wound 1 8543603081 Studbolt with nuts 4 8138671551 8138270251 Drain or vent point DN 40 Fig.H DN350 - 600 Branch: branch nipple flanged Blind flange 1 7660000041 Gasket spiral wound 1 8543603121 Studbolt with nuts 4 8138671571 8138270271

16620y

Documents