17 frames, suspension & fenders (chassis, suspension et pare-boue) 2010

All part numbers in BOLD MAGENTA are new for 2010.

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

932

PART # DESCRIPTION SUG. RETAIL0501-0049 Bagger-style frame $2,967.95

BAGGER-STYLE FRAME•The closest frame to stock made in the aftermarket industry

•Designed to accept all OEM parts without any modifications needed

•Handcrafted using the highest-quality CNC’d and laser-cut components, allowing the builder a painless bike build

•The strength and quality of this frame makes it like no other in the industry

•Features stock rake and stock stretch

•Accepts a 130-150mm rear tire, or 200mm tire with any 200mm kit for a stock frame

•Main frame rails are 11/8” tubing•Use with any Evolution or Twin Cam FLT drivetrain•Rear motor mounts are CNC-machined•Accepts stock gas tank, fenders, seat, axle, covers and accessories; stock pivot shaft and components; stock front end; stock battery box; stock or Chopper Guys custom billet swingarm; or 200mm wide tire kit for a stock frame

•Made in the U.S.A.

NOTE: Swingarm not included, see page 934 for custom billet swingarm.

FAT GUY 200MM TIRE BAGGER FRAME KIT•Run 200mm tire on all bagger models•CNC-machined, lasered and formed components•Features a 30° rake•1” extended, billet steel swingarm, accepts 1” axle•Lowered 1” to provide a lower center of gravity for weight ratio•Symmetrically widened for balance•Accepts stock or custom Evolution or Twin Cam FLT style motor, transmission, front end assembly and gas tank•Made in the U.S.A.

NOTE: Swingarm bushing kit PART #1302-0167, sold separately.

NOTE: Transmission not included.

NOTE: Minor gas tank modifications required.

PART # DESCRIPTION SUG. RETAIL0501-0050 200mm tire bagger frame kit $3,333.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

933

PART # DESCRIPTION SUG. RETAIL0501-0048 Bobber 130

Rigid frame $1,662.95

FAT GUY RIGID BOBBER FRAME•Lightweight construction•CNC billet construction of frame components•Accept stock FXST/FLST-style oil tank and rear caliper•Has 0” stretch at the backbone with a 30° rake in the neck

•Accepts chain or OEM drive belt set-up•Made in the U.S.A.

NOTE: Rigid frames will accept Evo and Shovelhead engines, or Panheads with upper mount modifications.

TWIN CAM FXR-STYLE FRAME KITS•Main frame rails are 11/4” tubing with a 21/2” square backbone•Feature a 28° rake and 1” backbone stretch•Will work with Twin Cam “A” motor and FLT complete drivetrain•Forward or mid control mounts included, along with a battery box cover•Wide-tire kit will accept up to a 180mm tire with stock 11/2” belt•Wide-tire and standard-width kits accept stock-length front ends, stock fuel tanks and most FXR stock components

•Wide-tire frame is symmetrically widened with engine offset 5/8” to the left; requires custom seat

•Standard-width frames available in kit or frame-only versions•Kits include custom billet swingarm, pivot shaft and axle with hardware (unless otherwise noted)

•All are rubber mounted•Made in the U.S.A.

PART # DESCRIPTION SUG.RETAILWIDE-TIRE FRAME KIT0501-0025 Twin Cam FXR frame kit w/ billet swingarm $2,500.95

PART # DESCRIPTION SUG.RETAILSTANDARD-WIDTH FRAME KITS0501-0027 Twin Cam FXR frame only (no swingarm) $1,662.95

240 FXR DROP SEAT FRAME KITS•The first frame kit of its kind!•Set up to run Twin Cam “A” or Evolution drivetrains with a 240 wide tire and dropped seat

•Features include a 21/2” square backbone, side rails that have been lowered 2”, 11/4” frame rails, dual swingarm shock mounts and a billet swingarm

•Add stock or aftermarket FXR model components•Has both forward and mid control mounts•Accept custom side covers, stock oil tanks and stock or aftermarket gas tanks

•CNC-milled mounts and brackets are precision formed•28° rake•1/2” offset chain drive kit required•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0501-0059 240 FXR Twin Cam

frame kit $2,767.95

0501-0025

0501-0027


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

934

PART # DESCRIPTION SUG. RETAIL0501-0066 FXR Pro Street $2,764.95

PRO-STREET DROP-SEAT FXR FRAME KIT•The frame dedicated to those who live in the fast lane•Includes a 30° rake, 3” lowered neck height, 2” backbone stretch and a drop-seat

•Frame rails are 11/4”, .120 wall with a 21/2” square, .120 wall Pro-Street backbone

•Precision formed and CNC-milled mounts and brackets with forward and mid-control mounts

•Accepts Twin Cam “A” or Evolution FXR/FLT drivetrains•Accepts Buell or any 29”-30” long front end•Kit also includes billet swingarm, pivot shaft and axle kit (pivot shaft is 3/4” and axle is 1”)


PART # DESCRIPTION SUG. RETAILDS-111115 Wide FXR Pro-Street w/ billet swingarm $2,500.950501-0024 Standard FXR frame w/ billet swingarm 2,166.95DS-111127 Standard FXR frame only 1,662.95

FXR FRAME KITS•Rubber mount like stock•Stronger and lighter than stock•Kit includes a rear axle•Frame weighs 50 lb. and swingarm weighs 15 lb.•Pro-Street frame will accept a 180 series rear tire with a stock 11/2” rear belt

•Pro-Street specs – 2” stretch, 33° rake, 5/8” offset•The standard FXR frame has 1” stretch, 28° rake•Accepts stock FXR accessories•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1301-0058 Custom swingarm $847.95

PART # DESCRIPTION SUG. RETAIL1302-0167 Bushing kit $285.95

CUSTOM SWINGARM•CNC-machined billet steel•More rigid than a stock swingarm; improves handling•Fits Chopper Guys Bagger-style frame (PART #0501-0049) and 82-01 OEM FLHT/FLHX/FLHR/FLTR frames•Accepts stock pivot shaft and components; 1” axle not included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-111167 For 88-94 FXR $42.95

FXR BRAKE ADAPTER•Brake adapter required to mount OEM brake caliper on Chopper Guys FXR steel billet swingarm


1301-0058

1302-0167

DS-111115

0501-0024

DS-111127


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

935

PART # DESCRIPTION SUG. RETAIL0501-0063 98-06 Dresser-style frame $2,103.95

DRESSER FRAME•OEM-style 98-06 Dresser frame with 26° rake•Accepts Twin Cam 88 and Evo-style engines with matching FLT/FLHT transmissions•Accepts stock sheet metal, forks, swingarm and suspension•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILXL FRAMES2406-2610 0” stretch frame $993.952406-2611 2”/4” stretch frame 1,176.952406-2612 3”/6” stretch frame 1,176.95

PART # DESCRIPTION SUG. RETAILACCESSORIES2005-2610 Raw oil tank $149.950912-2610 Battery box 56.95

XL RIGID FRAMES•Available in three styles for use with 86-03 XL motors•PART #2406-2610 has 0” stretch and 30° rake; uses stock length XL front fork (31”), accepts a flat-side Fat Bob gas tank and uses a 5” or 6” rear fender•PART #2406-2611 has a 2” stretch in the backbone and 4” stretch in the down tubes with a 40° rake; requires a 12”-over (39”) front fork, does not have fuel tank mounts and uses a 5” or 6” rear fender

•PART #2406-2612 has a 3” stretch in the backbone and 6” stretch in the down tubes with a 40° rake; requires 15”-over (42”) front fork, does not have fuel tank mounts and uses a 5” or 6” fender

•Frames are all 1” tubing and include a 3/4” rear axle•Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive•Use PM or GMA rigid rear brake caliper kits•Will also accept XL forward controls or stock mid-controls and most exhaust systems•Frames will require neck post bearing cups, oil tank and battery box (must be purchased separately)•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0501-0055 Big Twin bobber style frame $1,333.950501-0060 Big Twin bobber 200 style frame 1,333.950501-0067 Rigid wishbone frame 1,539.95

BIG TWIN BOBBER STYLE RIGID FRAMES•Made with 11/4” DOM tubing (.120” wall thickness)•Features 0” stretch in backbone and down tubes; 30° rake•Designed with an hourglass style neck with internal fork stop•Includes CNC OEM styled axle adjusters plates, neck gussets, motor mounts and transmission mounting brackets

•Can be run with 4- or 5-speed transmissions•Frames will accept all Big Twin style motors except Twin Cam•Will accept direct exchange of FXST/FLST components; some welding will be required

•PART #0501-0055 will accept 130-series tire with a belt drive or a 180-series tire with a chain drive

•PART #0501-0060 will accept 180-series tire with a belt drive or a 200-series tire with a chain drive

•PART #0501-0067 will accept 180-series tire with a belt drive or a 180-series with a belt drive or a 200-series with a chain drive

NOTE: Will require a 86-99 FXST/FLST length rear axle and axle adjusters with coarse thread.

2406-2610

0501-0067

2406-2612

2005-2610

0912-2610

0501-0055

0501-0060


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

936

PART # DESCRIPTION SUG. RETAILHIDDEN-AXLE DESIGN0503-0047 For 07 FLST, FXST, 240mm tire $3,475.95DS-111061 For 00-05 FXST, 00-06 FLST, 200mm tire 3,626.95DS-111062 For 00-06 FXST, FLST, 240mm tire 3,626.95

SOFTAIL WIDE DRIVE KITS•Available in two styles: one style keeps the transmission in the center of the bike (stock location), and the other offsets the transmission; offset versions are available in a hidden-axle or open-axle design

•Come in two sizes: for use with 200mm tires or 240mm tires

•Wide drive kits require an experienced mechanic to install them; installation of kits that keep the transmission in the stock location requires the disassembly of the transmission to replace the main shaft and 5th gear (mainshaft and 5th gear included)

•Require the removal of the cast fender strut ears; maintain stock ride height•Wide drive kits for 00-07 models include swingarm, 3/4” axle, fender struts, spacers, front pulley, all required hardware and instructions

•Wide drive kits for 88-99 models include swingarm, 3/4” axle, fender struts, transmission offset mount, shaft extensions, spacers and other required hardware and instructions

•200mm kits require a 11/8” belt and a 9” fender; the 240mm kits use a 11/8” belt (07 models use a 20mm belt), require offset 8.5” wheel and require a 101/2” fender (sold separately)

NOTE: Stock calipers on 88-99 applications will not clear rim; require custom calipers.

NOTE: Installation of Wide Drive kits requires a trained technician.

PART # DESCRIPTION SUG. RETAIL0503-0044 For 00-06 FXST, FLST models $3,368.950503-0045 For 90-99 FXST, FLST models 3,368.95

240MM SOFTAIL WIDE DRIVE KITS WITHOUT STRUTS•Kits include wide swingarm, 3/4” axle, axle covers, shaft extensions, transmission mount (for 90-99 only), spacers and required hardware

•Does not include rear fender struts; designed for use with RSD Vintage Rear Fender Kit, PART #1401-0178, or custom 101/2” rear fender and custom struts

•Installation requires the removal of stock fender struts•Requires the use of a 11/8” or narrower rear belt

KITS WITH TRANSMISSION IN STOCK LOCATION KITS WITH TRANSMISSION OFFSET

PART # DESCRIPTION SUG. RETAILOPEN-AXLE DESIGNDS-111055 For 88-99 FXST, FLST, 200mm tire $2,311.95DS-111057 For 88-99 FXST, FLST, 240mm tire 2,355.95HIDDEN-AXLE DESIGNDS-111056 For 88-99 FXST, FLST, 200mm tire 2,311.95DS-111058 For 88-99 FXST, FLST, 240mm tire 2,355.95

0503-0047

DS-111061

DS-111055

DS-111056


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

937

PART # DESCRIPTION SUG. RETAILWIDE DRIVE KITS0503-00571 For 07-08 FLHT, FLHR and FLTR models, OEM-style fender $3,520.950503-00581 For 07-08 FLHT, FLHR and FLTR models, custom-style fender with taillight assembly 4,142.950503-00591 For 07-08 FLHT, FLHR and FLTR models, smooth-style fender 3,520.950503-0021 For 02-06 FLHT, FLHR and FLTR models, OEM-style fender 5,457.95ACCESSORIES3501-0358 Saddlebag relocation kit for 07-08 FLHT, FLHR and FLTR models 500.950431-0317 Air valve relocation bracket for 97-08 FLHT, FLHR and FLTR models 47.95REAR FENDERS FOR 97-06 FLHT, FLHR, FLTR1401-0188 Repl. OEM-style fender 796.951401-0189 Optional smooth-style fender 796.951401-0190 Optional custom-style fender w/ taillight assembly 1,502.951 Requires saddlebag relocation kit, PART #3501-0358, in order to reuse stock saddlebags.

200MM WIDE DRIVE KITS FOR DRESSERS•A revolutionary customization for Dressers; makes a Dresser look unlike any other bike on the road

•The easiest way to install a wide drive; bolt-on kit requires no modification•Allows owner to retain saddlebags and stock exhaust; tourpak and backrest will require OEM detachable docking hardware to properly mount

•Kit includes a wide swingarm with a 1” rear axle, rear fender, fender strut covers, saddlebag support, billet aluminum primary spacers, transmission components, shaft extension and all necessary brackets and hardware; 07-08 kits do not require replacing the transmission shaft, gear, belt or pulley

•Accepts 16” x 5.5” or 18” x 5.5” rear wheels and most tires up to 200mm wide•97-06 models require a 11/8” belt and rear pulley•Models with 18” rear use OEM brake caliper; models with 16” rear require a smaller custom brake caliper

•Installation of tourpak or backrest will require OEM detachable docking hardware and docking kit PART #3550-0075 (sold separately)

•Air valve relocation bracket relocates the air fill valve for the rear suspension when using Wide Drive kit; available separately


0503-00570503-0058

0503-0059 0503-0021

3501-03580431-0317

1401-0188

1401-0189

1401-0190


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

938

WIDE FENDER KITS FOR DRESSERS•The easiest way to install a wide fender; bolt-on kit requires no modification•Allows owner to retain stock saddlebags and exhaust•Kits include one-piece, 14-gauge steel wide fender, fender strut covers, frame extension, support bracket and all necessary hardware

•Accept tires up to 200mm with a wide swingarm conversion or 180mm tires with a chain drive conversion

•Three styles available•Installation of tourpak and backrest will require OEM detachable docking hardware and docking kit PART #3550-0075 (sold separately)

PART # DESCRIPTION SUG. RETAIL3550-0075 Docking kit $369.95

PART # DESCRIPTION SUG. RETAIL0503-0060 06-09 Dyna Glide; requires a 20mm wide belt $3,475.952406-1536 02-05 Dyna Glide; requires a 11/8” wide belt 3,733.952406-1535 00-01 Dyna Glide; requires a 11/8” wide belt 3,733.952406-1534 96-99 Dyna Glide; requires a 11/8” wide belt 3,733.95

240MM WIDE DRIVE KITS FOR DYNA GLIDE•With these kits you can install a 240mm tire on a Dyna Glide and still keep everything in the center of the bike

•96-05 kits include swingarm, 3/4” axle, fender struts, shaft extensions, spacers and all required hardware and instructions; 06-09 kits include swingarm, 1” axle, fender struts, spacers and all required hardware and instructions (requires the removal of the cast fender strut ears)

•Installation requires the disassembly of the transmission to replace the main shaft (96-05 only) and frame modifications; the 240mm kits require some clearancing on the inner primary

•Will require the use of a custom wide rear fender (sold separately)


PART # DESCRIPTION SUG. RETAIL0503-0043 For 90-94 FXR $3,733.95

200MM WIDE DRIVE KIT FOR FXR•With these kits you can install a 200mm tire using a 11/8” rear belt and still keep everything in the center of the bike

•Kits include swingarm, 1” axle, billet aluminum primary spacer with hardware, all necessary transmission parts, shaft extension for compensating sprocket, starter with hardware and etailed instructions

•Will require the use of a custom wide rear fender (sold separately)


PART # DESCRIPTION SUG. RETAILFOR 97-07 FLHT, FLHR, FLTR1401-0185 OEM, taillight cutout $1,395.951401-0186 Smooth, no taillight cutout 1,395.951401-0187 Custom w/ taillight assembly 2,115.95

DOCKING KIT FOR WIDE FENDERS•Allows use of OEM mounting brackets for tourpaks and backrests on Custom Valley wide fenders for Dressers•Stainless steel construction

2406-1536

1401-0185

1401-0186

1401-0187


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

939

BAGGER MO’TIRE 180 REAR TIRE KIT•The ultimate MO (MakeOver) for a bagger allows the use of a 180 rear tire while using an OEM belt; riders get the cleanliness and reliability of a belt drive without a lot of the work required with other wide tire kits, as it does not require swingarm replacement or disassembly of the transmission

•Kits include stretched fender, Curvaceous upper filler panels (lower filler panels must be purchased separately), pulleys, all necessary mounting hardware and gaskets (08 kits do not include pulleys or gaskets, not required). There is no need for an extended main shaft or offset primary; just quick, easy installation with the use of Klock Werks Signature E-coated, predrilled, stamped steel fender and fillers

•Kits are available in 6” or 2” stretch (over stock length) with or without frenched license plate pocket•Detachable 180 tire kits are for use with detachable Tour-pak® and feature slotted fillers and require the use of Tour-Pak® Rack•Chrome rack with logo accepts OEM Tour-Pak® and Klock Werks Passenger Backrest•Made in the U.S.A.

NOTE: Kit requires purchase of Drag Specialties belt PART #1204-0061 H-D OEM belt part #40024-07 for 97-06 models and also requires purchase of an 18” x 5.5” rear wheel with a 3.485” pulley side hub.

PART # DESCRIPTION SUG. RETAILFOR 08 FLHT, FLHR, FLTR W/ STOCK 6-SPEED AND CUSH DRIVE0503-0082 6” stretch, frenched license; detachable $1,584.950503-0078 6” stretch, frenched license; non-detachable 1,584.950503-0084 6” stretch, smooth; detachable 1,584.950503-0080 6” stretch, smooth; non-detachable 1,584.950503-0081 2” stretch, frenched license; detachable 1,584.950503-0077 2” stretch, frenched license; non-detachable 1,584.950503-0083 2” stretch, smooth; detachable 1,584.950503-0079 2” stretch, smooth; non-detachable 1,584.95FOR 07 FLHT, FLHR, FLTR W/ STOCK 6-SPEED OR 97-07 W/ S&S 6-SPEED0503-0074 6” stretch, frenched license; detachable 1,884.950503-0070 6” stretch, frenched license; non-detachable 1,884.950503-0076 6” stretch, smooth; detachable 1,884.950503-0072 6” stretch, smooth; non-detachable 1,884.950503-0073 2” stretch, frenched license; detachable 1,884.950503-0069 2” stretch, frenched license; non-detachable 1,884.950503-0075 2” stretch, smooth; detachable 1,884.950503-0071 2” stretch, smooth; non-detachable 1,884.95

PART # DESCRIPTION SUG. RETAILFOR 97-06 FLT, FLHT, FLHR, FLTR W/ STOCK 5-SPEED OR BAKER DD60503-0066 6” stretch, frenched license; detachable $1,884.950503-0062 6” stretch, frenched license; non-detachable 1,884.950503-0068 6” stretch, smooth; detachable 1,884.950503-0064 6” stretch, smooth; non-detachable 1,884.950503-0065 2” stretch, frenched license; detachable 1,884.950503-0061 2” stretch, frenched license; non-detachable 1,884.950503-0067 2” stretch, smooth; detachable 1,884.950503-0063 2” stretch, smooth; non-detachable 1,884.95FRENCHED LICENSE PLATES2030-0307 Chrome lighted 199.952030-0308 Chrome non-lighted 99.952030-0309 Raw non-lighted 59.95ACCESSORIES1501-02491, 2 Detachable passenger backrest 229.953516-00581 Detachable Tour-Pak® Rack 299.951 Requires the use of OEM camlocks to properly mount.2 Accepts OEM backrest pads.

0503-0075

0503-0082

3516-0058

1501-02492030-0307


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

940

TXR STABILIZERS•CNC-machined from 6061 T-6 aluminum•Improve handling by triangulating motor and transmission in the chassis to eliminate frame wobble at high speeds and while cornering

•Adjustable intermediate member with integrated patented Gooden-Tite polyurethane and aluminum isolator bushings

•Open plate design with ventilating air scoops to assist in transmission cooling

•Easy bolt-up installation•Available in black anodized or polished finish•Include stainless steel hardware and Heim joints


PART # DESCRIPTION SUG. RETAILFOR 93-08 FLT, FLHT, FLHR, FLTR, FLHX MODELS1111-0001 Black anodized $399.951111-0003 Polished 449.95

PART # DESCRIPTION SUG. RETAILFOR 93-08 FLT, FLHT, FLHR, FLTR, FLHX MODELS WITH BAKER PLUS ONE OIL PAN OR CUSTOM CYCLE ENGINEERING FINNED OIL PAN1111-0007 Black anodized $347.951111-0008 Polished 398.95

DXR STABILIZERS•CNC-machined from 6061 T-6 aluminum•Improve handling by triangulating motor and transmission in the chassis to eliminate frame wobble at high speeds and while cornering

•Adjustable intermediate member with integrated patented Gooden-Tite polyurethane and aluminum isolator bushings

•Open plate design with ventilating air scoops to assist in transmission cooling

•Easy bolt-up installation•Available in black anodized or polished finish•Include stainless steel hardware and Heim joints•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 06-10 DYNA MODELS1111-0009 Black anodized $399.951111-0010 Polished 449.95

PART # DESCRIPTION SUG. RETAIL1111-0006 93-08 FL models (all) $199.95

TOURING LINK•The answer to the handling challenges faced by most touring models has arrived

•Helps stabilize the chassis by keeping the motor/swingarm assembly aligned with chassis without causing unnecessary vibration to the rider

•Ground clearance will not be affected

•Easy to install •Made in the U.S.A.

ULTRA RIDE STABILIZING SYSTEM•Dramatically frees your bike from that “loose” feeling and high-speed wobbles that can plague the bike at speed

•System connects the powertrain to the frame by adding stabilizing links

•Allows the drivetrain to move freely in a forward motion, but eliminates side-to-side movement

•Cut pattern on rear mount plate allows unrestricted air to circulate around the oil bag

•Mount brackets manufactured from 6061-T6 billet aluminum, all mounting hardware and turnbuckles are stainless steel


PART # DESCRIPTION SUG. RETAILFOR 93-08 FLHT/FLTR/FLHR/FLHX0933-0047 Brushed aluminum $399.950933-0049 Black 399.95

SWINGARM RETROFIT•Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models

•No need to alter transmission housing•Will require the purchase of a 02-08 style OEM swingarm with bearings, rear caliper, 1” diameter rear axle and 1” rear wheel bearings


PART # DESCRIPTION SUG. RETAILFOR 80-84 FLT/FLHT/FLHS1302-0257 Retrofit kit $255.951302-0258 Retrofit kit w/ pivot shaft 296.95

SWINGARM CONVERSION RETROFIT KITS•Replaces stock Cleve Bloc style swingarm bushings with spherical bearings

•Dramatically changes handling and tracking of Dresser models

•Spherical bearings greatly reduce the stiction at the swingarm pivot, which provides a quicker reaction time to harsh road conditions

•Negates any lateral and torsional movement in the swingarm•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-01 FLT/FXR MODELS1302-0207 Swingarm conversion retrofit kit $283.951302-0208 Swingarm conversion retrofit kit

w/ pivot shaft 345.95

1111-00011111-0003

1111-0007

1111-0009

0933-0047

1302-0257

1302-0258

Swingarm not included

1302-0207

1302-0208


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

941

SWINGARM PIVOT SHAFTS•Each part has a 12-point head on both ends for a symmetrical look and performance

•Special 12-point nuts without a flange have been CNC-machined for each application; CNC-machined and hand-polished flange washers replace the factory-stamped washers for a precision look

•Nut end is mirror-polished•Made from 630 stainless steel with a tensile strength of 170,000 psi (15% stronger than GR8)


PART # DESCRIPTION SUG. RETAIL1302-0091 For 00-10 Softail models;

repl. OEM #s 9270A, 11282 $41.951302-0084 For 84-99 Softail models;

repl. OEM #s 9076, 11158 44.951302-0001 For 85-86 FX/FXWG models

(except Softail, FXR/FLT) 25.95

SWINGARM BEARING KITS•Individual bearing kits that include required bearings, seals, spacers and lock tabs

PART # DESCRIPTIONSUG.

RETAILDS-540795 Bearing w/ race for 85-86 FX/FXWG (set);

repl. OEM #s 9033 and 9052 $12.95DS-540796 Bearing only for 85-86 FX/FXWG (ea.) 7.95DS-540797 Race only for 85-86 FX/FXWG (ea.) 5.950215-0205 Bearing w/ race for 85-86 FX/FXWG (set);

repl. OEM #s 9033 and 9052 10.950502-0194 Right bearing and race for 86-99 XL; also fits left

swingarm bearing and race for 91-05 Dyna Glide; repl. OEM #47082-81 (set) 7.95

0502-0195 Left bushing for 86-03 XL; repl. OEM #47083-81 (ea.) 5.95

SWINGARM BEARINGS, RACES, BUSHINGS•Bearings, bushings or races for various H-D models•Sold as a set or individually•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1302-0166 For 00-07 FXST/FLST; repl. OEM #47610-00 $112.95

SOFTAIL FLUSH-MOUNT SWING-ARM PIVOT SHAFT•Eliminates the nut-bolt and cotter key look with a flush-mount swing-arm bolt

•Includes shaft with peaked, polished stainless steel end caps

PART # DESCRIPTION SUG. RETAIL0309-2250 For 00-07 FXST/FLST; repl. OEM #s 47610-00,

48048-00 and 48049-00 $46.95

SWINGARM PIVOT SHAFT KIT•Kit includes pivot shaft, two bushings, two chrome spacers, chrome nut and washer

PART # DESCRIPTION SUG. RETAIL1302-0278 For 02-10 FLT/FLHT; repl. OEM #47505-02 $72.951302-0279 For 84-94, 99-00 FXR; repl. OEM #47492-89A 77.95

SWINGARM PIVOT SHAFTS•Stronger and more rigid than stock•Has a memory which helps prevent bending and twisting by high-powered motors


PART # DESCRIPTION SUG. RETAIL1302-0260 For 08-10 FXST/FLST $149.951302-0259 For 00-07 FXST/FLST $149.95

PART # DESCRIPTION SUG. RETAILDS-190901 For 84-99 Softail $26.95

SOFTAIL SWINGARM AXIS TUBE BOLT KIT•Kit contains two chrome-plated

3/4”-16 x 3” grade 8 hex bolts and two chrome washers


PART # DESCRIPTION SUG. RETAIL1302-0168 For 84-99 Softail models $62.95

SWINGARM PIVOT BOLT SET•Socket cap fasteners made from stainless steel with a polished finish

•Manufactured from only the best materials that are certified SDF (Seamless and Defect Free), heat treated to a minimum of 180,000 psi (20% stronger than GR8) and then the threads are rolled to a UNJ3A spec


PART # DESCRIPTION SUG. RETAILFOR 84-94/99-00 FXR1303-0076 Smooth $102.952406-8768 Ball-milled 102.95

SWINGARM PIVOT BLOCKS•Chrome-plated, CNC-machined T-6 billet aluminum

•Available in smooth or ball-milled design

•Include mounting hardware•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL

FOR FXR OR FLT; REPL. OEM #S 4729 AND 3782DS-190121 7/16” -14 x 11/4” w/ center cap plugs;

repl. OEM #67830-59 $12.95DS-190123 7/16” -20 x 11/4” 10.95

SOCKET-HEAD SWINGARM END CAP BOLT KITS•Chrome finish•Sold in 4-pk.•Made in the U.S.A.

1302-00841302-0001

DS-540795

0215-0205

0502-0194

1302-0278

1302-0279

1302-0259

1303-0076

2406-8768

DS-190123

DS-190121


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

942

PART # DESCRIPTION SUG. RETAIL0933-00531 For 86-08 FLT,

86-94 FXR; repl. OEM #47564-86B $19.95

1 Will fit 85 models that have been updated with OEM swingarm pivot update kit.

SWINGARM MOUNT•Meets or exceeds OEM specifications

•Sold each

PART # DESCRIPTION SUG. RETAIL2401-0120 For 00-07 FXST/FLST (except

FLSTF/FXSTD/FLSTN) $30.95

SWINGARM PIVOT COVERS•Chrome-plated domed covers with a smooth finish

•Easy installation with setscrews

•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-190982 Repl. OEM #s 67865-89

and 67830-59 $4.95

HEADLIGHT VISOR HOLE PLUG/SWINGARM PIVOT CAP•Chrome-plated cap plugs the headlight mounting hole on 86-06 XL and 84-06 FX headlight visors

•Also for dressing up 82-94 FXR swingarm pivots•Made in the U.S.A.; sold each

PART # DESCRIPTION SUG. RETAILFOR 00-07 FXST/FLST (EXCEPT FXSTD, FLSTF, FLSTN)1303-0044 Warrior $59.951303-0045 Smooth 59.951303-0046 Milled 59.951303-0047 Crusader Maltese cross 59.95

PART # DESCRIPTION SUG. RETAILFOR 04-07 XL1303-0094 Warrior $56.951303-0091 Nasty 56.951303-0093 Milled 56.951303-0092 Crusader Maltese cross 56.95

SWINGARM PIVOT BOLT COVERS•Quality chrome-plated billet aluminum construction



RETAIL1303-0026 For 00-07 Softail models $17.951303-0025 For 84-99 Softail models 13.95

SWINGARM PIVOT BOLT COVERS•Die-cast, chromed and securely held in place by a setscrew

•Add a clean look

PART # DESCRIPTION SUG. RETAIL0502-0078 For 84-99 Big Twin $174.95

BOLT-ON SPRINGLESS KICKSTAND•Clean, no-spring look in a bolt-on version•Completely smooth, chrome-plated design•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL

DS-240019 For 89-06 FXST and FLST models $79.950510-0108 For 90-10 FXD models 79.95

1” LOWERED KICKSTANDS•Chrome-plated forged steel•1” shorter than stock kickstand•Mounts to stock mount and accepts stock spring

PART # DESCRIPTION SUG. RETAIL1902-0036 Front mount, 84-99 FXST models,

4-speed FX models $199.951902-0037 Rear mount, 84-99 FXST (drilling required) 199.951902-0038 Rear mount, 00-10 FXST models 199.951902-0039 Rear mount, all FXR models 199.95

CHROME TELESCOPIC KICKSTAND•Telescopic design allows adjustment of 1”•Mounting brackets are machined from stainless steel to eliminate chrome wear in contact area

•Hidden ball-bearing design return spring for positive feel and clean look•Works great for bikes that have been lowered•Made in the U.S.A.


RETAILDS-233677 Complete kickstand kit for 85-86 FXST, FX models $65.950510-0038 Complete kickstand kit for 89-99 Softail models

(standard length) 62.950510-0039 Complete kickstand kit for 89-99 Softail models

(1” under stock length) 62.95DS-233675 Kickstand mounting repair kit for PART #DS-233677 22.95DS-233676 Repl. mounting bracket only; repl. OEM #50041-80A 16.95

CHROME KICKSTAND KITS•Complete kit includes a one-piece polished chrome mount with spring tab, kickstand, leg stop, spring and nut

•Mounting repair kit available; includes mount, spring, leg stop and nut

•Mounting bracket only may be purchased separately

1902-0039

0510-0108DS-240019

1902-00371902-0038

0510-0038

1902-0036

DS-233677

1303-0044

1303-0047

1303-0046

1303-0025

1303-0045

DS-233675


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

943

CHROME KICKSTANDS•High-strength steel kickstands with a brilliant chrome finish

•Replaces OEM kickstands perfectly•Overstock kickstand lengths are for bikes with longer suspension than stock

•Understock kickstands are for bikes with lowered suspension

PART # DESCRIPTION SUG. RETAILFOR 89-06 FXST, FLST AND 84-00 FLTDS-2400551 Stock length for 89-06 FXST and FLST models;

repl. OEM #50087-89A (11” L) $46.95DS-2400541 Stock length for 84-00 FLT models; repl. OEM

#50075-83/50075-91A (11” L) 46.95FOR 85-86 BIG TWIN AND 84-88 FXST, FLSTDS-2400441 Stock length; repl. OEM #50061-36E (101/2” L) 42.950510-00611 Stock length, round (101/2” L) 58.950510-0062 1” over stock length, round 58.95DS-2400502 1” over stock length, OEM style 47.95DS-2400452 1” under stock length, custom round 81.95FOR 84-94 FXR MODELSDS-2400433 Stock length for 84-90 FXR, FXRS and FXLR;

repl. OEM #50031-84A (123/4” L) 31.95

PART # DESCRIPTION SUG. RETAILFOR 86-10 XL MODELS0510-0078 For 04-10 models, stock length $49.950510-0079 For 04-10 models, 1” shorter than stock length 49.95DS-2400011 For 86-88 models that have been

lowered 2” (7” L) 52.95DS-240003 Fits 92-03 Hugger and 97-99 1200 Custom;

repl. OEM #50072-92 (81/4” L) 52.951 Big Twin, Softail, FLT and XL kickstands are measured from the first bend

at the top to the first bend at the bottom of the kickstand.2 Kickstands that are shorter than stock length are for bikes that have

been lowered. Kickstands that are longer than stock length are for bikes with 4-6” longer fork tubes with no change in rake.

3 FXR kickstands are measured from the center of the mounting hole to the first bend at the bottom of the kickstand.

CHROMED KICKSTAND COMPONENTS•For various Big Twin models

PART # DESCRIPTION SUG. RETAILDS-240004 Kickstand mounting support for 85-99 FXST,

FLST models; repl. OEM #50018-85 $16.95DS-240201 Kickstand mounting support for 84-85 FX, FXST,

FXWG (except FXR, FXRS); repl. OEM #50014-74 16.95DS-240210 Kickstand leg stop for 84-87 FX, FXST, FXWG;

repl. OEM #50028-74 7.95DS-240205 Kickstand spring plate for 84-90 FX, FXST, FXWG;

repl. OEM #s 50036-36, 50028-74A 8.95

CHROME KICKSTAND SPRINGS•Available for a wide selection of Big Twin and XL models

•Springs are measured from hook to hook; sold each

PART # DESCRIPTION SUG. RETAILDS-240330 For 84-90 FLT, FLHT; 84-90 FXR, FXRS, FXRT;

repl. OEM #50011-30 (3.4”) $3.95DS-233678 For 91-06 FXST/FLST, 85-98 FLT, 91-10 XL and

95-06 Buell; repl. OEM #50005-85A (3.7”) 4.95DS-233679 86-90 XL; repl. OEM #41836-84 (3.9”) 4.95

UNIVERSAL KICKSTAND MOUNT•CNC-machined from billet steel•Can be welded to any 11/8” diameter tubing•Accepts 52-E84 XL-style kickstands•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-111000 Universal kickstand mount $61.95

KICKSTAND WEDGE KIT•This kit, designed by Don Hotop, allows you to change the angle of your kickstand at the frame, rather than heating and bending your chrome kickstand to work for lowered bikes

•Maintains the original angle of the foot board

•6061 billet aluminum construction

•Includes both fine- and coarse-thread bolts for early and late models and installation instructions

PART # DESCRIPTION SUG. RETAIL0510-0028 84-06 FLT, FLHT, FLHS and FLHR models

lowered up to 2” $43.95

KICKSTAND WEDGES•4° and 8° kickstand wedges for 84-08 FL models

•The 4° wedge allows for a kickstand adjustment when using a 16”, 18” or 21” front wheel and prevents the bike from leaning to the left while utilizing the stock kickstand

•The 8° wedge maintains the stock upright position when using a 23” front wheel with no kickstand modifications required

•The 8° also works for a 21” wheel with extended forks•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0510-0112 4° $59.950510-0113 8° 59.95

DS-240055

DS-240043

DS-240054 DS-240044 DS-240045

DS-240201 DS-240210

DS-240205DS-240330

DS-233678

DS-233679DS-240004

0510-0112

0510-0079

0510-0078


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

944

PART # DESCRIPTION SUG. RETAIL0510-0040 Kickstand wedge $14.95

6° ANGLE KICKSTAND WEDGE•Plate enables a 6° lean angle adjustment (up or down) on side stands with mounting holes 17/16” apart

•CNC-machined from billet with a polished, chromed finish

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILDS-240202 For 84-99 Big Twin models $22.95

KICKSTAND WEDGE•Aluminum wedge changes the angle of the kickstand so it does not have to be bent

•For lowered models only•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0510-0090 For 84-99 Big Twin (except FL) $23.95

KICKSTAND ANGLE PLATE•For use on lowered bikes•Allows you to adjust the angle of your kickstand quickly and easily

•Sold each

PART # DESCRIPTION SUG. RETAILDS-240021 For 86-06 FXST, FLST (except 05-06 FLSTN),

84-06 FLT, FLHR and FLTR models $29.95DS-240022 For 93-05 FXD models 29.95

EASY FIND KICKSTAND EXTENSION•Chrome extension makes hard-to-reach kickstands easier to operate

•Comes with hardware

NOTE: Drilling required.

PART # DESCRIPTION SUG. RETAILDS-240015 For 84-08 FLT/FLHT/FLHR/FLTR and

86-06 Softail models (except 05-06 FLSTN); repl. OEM #50055-90 $19.95

KICKSTAND EXTENSION•Chrome extension for easy reach

•Comes with rubber bumper, mounting hardware and instructions

NOTE: Kickstand sold separately.

NOTE: Must drill 1/4” hole in kickstand.

PART # DESCRIPTION SUG. RETAILDS-240212 For all 89-99 Softail models w/ stock kickstand

bracket OEM #50018-85 $12.95

ADJUSTABLE KICKSTAND STOP•Adjustable kickstand stop protects the primary case from the kickstand

•Eliminates the need for the glue-on rubber pad

•Nylon tip screw with jam nut provides adjustment for proper kickstand position

•Made from 5/16” thick high-strength steel


RETAIL0710-0039 For 86-06 FLT/FLHT models and 84-94 FXR models $38.95

KICKSTAND EXTENSION•Made of highly polished stainless steel•Attaches to the stock kickstand and is adjustable to extend outward from 13/4” to 23/4”

•Works great with stock covers for easier accessibility of stock kickstands and necessary when using oversized primary covers such as the Barnett billet aluminum cover

•Installation is easy without drilling holes•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-240008 For 89-06 FXST, 95-04 FXDS- Convertible, FXDX,

FXDXT 86-00 XL; repl. OEM #62123-66 $1.95 (ea.)

KICKSTAND BUMPER•Rubber bumpers•Sold each to consumer; sold to dealer in 5-pack

PART # DESCRIPTION SUG. RETAIL0510-0034 Kickstand boot $7.95 (ea.)

KICKSTANDBOOT•Distributes your bike’s weight and prevents sinking into hot asphalt, dirt or grass

•Sold in pack of 12

PART # DESCRIPTION SUG. RETAILDS-173388 Genuine James kickstand bumpers (10-pk.) $1.95 (ea.)DS-375631 Kickstand bumpers (6-pk.) 1.25 (ea.)

KICKSTAND BUMPERS•Easy attachment with double-backed adhesive (included)

PART # DESCRIPTION SUG. RETAILDS-375641 11/8” bumper for 91-01 Dyna Glide

(except FXDS-CON); repl. OEM #50054-90 $4.95DS-375642 1” bumper for 85-00 FLT/FLHT models;

repl. OEM #50059-85 4.95

FRAME-MOUNTKICKSTAND BUMPERS•Rubber kickstand bumpers clip to the round frame tubes under the primary cover

•Great for custom applications•Sold each

DS-375631

DS-375641 DS-375642

DS-240021

DS-240022


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

945

PART # DESCRIPTION SUG. RETAIL0504-0094 For 95-07

FLT models $199.95

CRUZ COVERS•Molded polyurethane covers replace OEM parts

•Left side features molded bottle-holder that accepts 20 oz. torpedo-style bottles and most 16 oz. bottles; right side covers the starter and wiring

•Built-in air deflectors keep engine heat off of the rider’s legs

•Ready for paint with minimal prep work

•Install easily without tools•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-373675 For 84-94/99-00 FXR models $76.95

CHROME SIDE COVERS•Impressively chromed steel side covers are designed to replace the stock black covers

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL0504-0111 For 97-07 FLHT/FLHR/FLTR models $104.95

BEHIND THE ENGINE FILLER PANEL FRAME COVER•Show-chromed cover fills the “black hole” behind the rear cylinder and the starter motor

•Also hides the gap between the y-frame member•No drilling or modifications required for cruise-control equipped models

PART # DESCRIPTION SUG. RETAILDS-373676 For 84-94/99-00 FXR models $89.95

CUSTOMSIDE COVERS•ABS plastic comesready to sand and paint

•Completely cover the triangle portion of the frame


PART # DESCRIPTION SUG. RETAILFOR 04-10 XL MODELS0520-0404 Right side $87.950520-0784 Left side 84.95

SIDE COVERS•Stamped-steel construction•Polished and chrome-plated•Replace stock painted covers in minutes; no drilling required•Sold each

PART # DESCRIPTION SUG. RETAIL0520-0786 For 09-10 FLHT/FLHR/FLTR/FLHX $199.950520-0785 For 97-08 FLT/FLHT/FLHR/FLTR/FLHX 199.95DS-373760 For 93-96 FLT/FLHT/FLHR 149.95

CUSTOM SIDE COVER SETS•Adds a “beefier” look while providing more area to continue your paint scheme

•Made of perfectly formed ABS plastic

•Covers are designed to mount to rear side panels

PART # DESCRIPTION SUG. RETAILKITS WITH LED PHANTOM COVERS1303-0086 For 08-10 FXST/FLST (except FLSTF, FLSTN) $199.951303-0110 For 06-07 FXST, FXSTB, FXSTC, FXSTS, 07 FLSTF 199.950504-0002 For 00-07 FXTSD models 199.950504-0018 For 00-05 FXST, 00-07 FLST (except 07 FLSTF,

FXSTD and FLSTN) 199.951303-0031 For 86-99 Softail 199.95KITS WITHOUT LED PHANTOM COVERS1303-0087 For 08-10 FXST/FLST (except FLSTF, FLSTN) 159.951303-0038 For 00-05 FXST, 00-07 FLST (except 07 FLSTF,

FXSTD and FLSTN) 169.951303-0077 For 86-99 FXST 169.95

SWINGARM COVERS/PHANTOM COVERS KIT•Easy-to-install chrome covers offer an alternative to downtime and plating

•Lighted and unlighted versions available•Both kits include four covers for tube section of swingarm, two upper swingarm covers, two Phantom covers and all necessary hardware

•Lighted covers have single-function LEDs that can be wired as auxiliary lights, turn signals or brake lights

NOTE: LEDs are not DOT approved.

NOTE: Kit will fit FLSTF, FXSTD or FLSTN models only if stock over-under shotgun exhaust has been replaced with a staggered dual or 2-into-1 system.

0520-0404 0520-0784

0520-0785DS-373760

0504-0002

1303-0038


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

946

PART # DESCRIPTION SUG. RETAIL1303-0032 For 00-05 FXST, 00-07 FLST (except FLSTF, FXSTD, FLSTN) $136.951303-0033 For 86-99 Softail 129.95

SWINGARM COVER SET•Intended for riders who already have Küryakyn’s Phantom Covers or other axle cover kit•Set includes a pair of sleek upper swingarm covers and four easy-to-install covers for the tubular sections of the swingarm

NOTE: In some applications there may be a small gap between the tubular swingarm covers and the axle cover.


RETAIL1303-0088 For 06-10 FXD/FXDWG $199.95

CHROME SWINGARM COVERS•Two-piece design for simple, quick installation

•Covers all visible parts of the swingarm, even the axles

•Sold as a set

DELUXE NECK COVER KIT•Add brilliance to a dull area with these smooth, quickly installed covers that shroud the neck and extend down the frame•Cover is enlarged enough on the right side to accommodate the in-line cruise control pull-off switch found on all Road King 02-05 models•Deluxe kit also includes two snap-on down tube pieces that add coverage almost all the way down to the floorboard mounts•Easy to install


RETAIL0502-0311 For 07-10 FLSTC, FLSTN, FLSTF $79.950504-0003 For 00-08 FXST (except FXSTD) 94.950504-0109 For 00-07 FXSTD 94.950504-0029 For 00-06 FLSTC, FLSTF and 05-06 FLSTN 84.950504-0108 For 86-99 FLSTC, FLSTF, FLSTN (does not fit FLSTS) 89.950504-0158 For 06-10 Dyna (except FXDWG) 146.95

NECK COVERS•Chrome-plated, die-cast construction•Covers the ugly stock welds on frame•Two-piece construction for easy installation•Wiring modifications required on models using the plug-in-style ignition modules that mount on the frame neck

PART # DESCRIPTION SUG. RETAIL0502-0310 For 09-10 FLHT/FLHR/FLTR/FLHX $199.950502-0312 For 08 FLHT/FLHR/FLTR/FLHX 199.95

PART # DESCRIPTION SUG. RETAIL0504-0077 For 95-05 FLT, FLHT, FLTR, FLHR models $169.95

NECK COVER SET•Cover up those unsightly stock welds without the hassle and expense of molding and painting

•Made of perfectly formed ABS plastic and comes ready to paint

•Designed to mount to neck area•Made in the U.S.A.


RETAILDS-373759 For 93-07 FLT/

FLHT/FLHR $79.95

0504-0158

0504-0003

0504-0108

0504-0029 0504-00290504-0029

0502-0310

0504-00770504-0077

1303-0032 1303-0033

0502-0312


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

947

PART # DESCRIPTION SUG. RETAIL0504-0159 For 92-99 FXST/FLST $59.950504-0078 For 00-06 FXST/FLST 59.950504-0112 For 07-10 FXST/FLST 59.95

DOWN TUBE COVERS•The easy way to add a touch of chrome to the front frame down tubes

•Simple snap-on installation•Sold as a set

PART # DESCRIPTION SUG. RETAIL0502-0074 For 00-07 FXST/FLST (except FXSTD) $94.950502-0075 For 00-07 FXSTD 94.95

MID-FRAME COVERS•Quick, easy way to conceal top frame tubes on Softails

•Steel construction with chrome-plated, creamy smooth finish

•Tuck in behind fender struts and slip up under the fuel tank•Sold in pairs

PART # DESCRIPTION SUG. RETAIL0502-0314 For 09-10 FLHT/FLHR/FLTR/FLHX models $119.950502-0313 For 08 FLHT/FLHR/FLTR/FLHX models 103.950504-0030 For 97-07 FLHT/FLTR/FLHR models 104.95

MID-FRAME COVERS•Chrome-plated steel covers create a beautiful highlight

•Conceal frame welds for a smooth, seamless look•Install in just minutes•Sold in pairs

PART # DESCRIPTION SUG. RETAIL0504-0079 For 95-07 Softail models $39.95

LOWER FRAME COVER•Eye-catching and easy to install

•Fits below Küryakyn’s Boomerang frame cover on the left side of the bike

•Not for use with models that have cross-over exhaust

•Sold each

0504-0159 0502-00740502-0074

0502-0075

0502-0314

0502-0313

0502-0313

0504-0030

RIGHT REAR LOWER FRAME COVER•Stamped chrome lower frame cover bridges the gap between the OEM side cover and the passenger floorboard

•Covers up the exposed frame tubes and rubber isolation mount•Sold each

PART # DESCRIPTION SUG. RETAIL0504-0113 For 91-08 FLT, FLHT,

FLHR, FLHX and FLTR w/o fairing lowers $69.95

LOWER FRONT FRAME COVER•Shrouds the kickstand assembly, front engine stabilizer and footboard mount with beautiful chrome

FENDER-TO-SADDLEBAG FILLER PANELS WITH LEDS•Panels feature dual-function LEDs

•Available with chrome or raw finish

•Mount to OEM fender brace

•LEDs are not DOT approved; recommended for off-road or show use only

•Use of LEDs as marker lights requires a load equalizer (PART #DS-272236 or BLLE02)

•Will not work with most bag guards•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 93-08 FLT, FLHT, FLTR AND FLHR (EXCEPT FLHX, FLHRCI, FLHRS/SI)DS-280303 Chrome filler panels (pr.) $327.95DS-280304 Raw filler panels (pr.) 308.95

PART # DESCRIPTION SUG. RETAIL0504-0119 For 07-08 FLHT/FLHR/FLTR $69.95

DS-280303

DS-280304

0504-0078


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

948

PART # DESCRIPTION SUG. RETAILFOR 93-08 FLT, FLHT, FLTR AND FLHR MODELS (EXCEPT FLHX, FLHRCI, FLHRS, SI) WITHOUT SADDLEBAG GUARDSDS-720121 Chrome covers $139.95DS-720129 Raw covers 59.95

FENDER-TO-SADDLEBAG COVERS•These covers fill the empty space between the rear fender and OEM saddlebags; without saddlebag guards

•Mount to OEM rear fender braces•Provides additional surfaces to mount marker lights or turn signals

•Available in a chrome or raw finish•Made in the U.S.A.

NOTE: Not for use with detachable hardware.

PART # DESCRIPTION SUG. RETAILFOR 09-10 FLHT, FLHR, FLTR MODELS0504-0180 No cutouts $379.950504-0182 W/ round LED cutout 399.950504-0181 W/ horizontal cateye/oval LED cutout 399.950504-0183 W/ vertical cateye/oval LED cutout 399.95

ONE-PIECE FILLERS•Constructed from 16-gauge steel and E-coated for rust and corrosion resistance and are designed to fill the void between the fender and saddlebags; a minor detail that makes a major impact

•Bolts directly to existing mounting locations; works with OEM detachable mounting kits

•LED auxiliary light cutouts are laser cut for precision fit; oval cutout for cateye/oval LEDs measures 1.875” L x 1” W and round cutout’s diameter is 1.625”; LEDs sold separately, see LIGHTING SECTION

•All are sold in pairs and include all necessary hardware and instructions to install them


PART # DESCRIPTION SUG. RETAILFOR 06-08 FLHX0504-0080 Smooth fillers for use w/ or w/o

detachable backrest $169.950504-0081 Slotted fillers for use w/ detachable tour

rack pack 169.95

CURVACEOUS UPPER FILLERS•Accent the line of your fender and hide clutter for a custom look

•Steel construction with E-coating, ready to color match paint

•Upper fillers mate up to the stock fender/lower filler on Street Glides

•Requires removal of stock license plate mount bar•Two versions – smooth for models with or without detachable backrests; slotted for models with detachable TourPak®

•Must remove stock license plate mount bar•Made in the U.S.A.

NOTE: Can also be used on 95-08 FLT, FLHT, FLHR and FLTR models when used in conjunction with Klock Werks lower filler panels

DS-720121

DS-720129

0504-0080

PART # DESCRIPTION SUG. RETAIL0504-0028 For 95-08 FLT, FLHT, FLTR, FLHR (except FLHX) $249.95

FLT FILLER PANELS•Designed for FLT Baggers with hard bags

•Fiberglass construction with gray gel coat finish

•Will not work with detachable accessories


NOTE: Custom installation and some modifications are necessary.

0504-0182

0504-0081


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

949

PART # DESCRIPTION SUG. RETAILLEATHER - SMOOTH STYLE0504-0120 No cutouts $129.950504-0121 W/ round LED cutout 129.950504-0122 W/ horizontal cateye/oval LED cutout 129.950504-0123 W/ vertical cateye/oval LED cutout 129.95

PART # DESCRIPTION SUG. RETAILLEATHER - DETACHABLE STYLE0504-0124 No cutouts $129.950504-0125 W/ round LED cutout 129.950504-0126 W/ horizontal cateye/oval LED cutout 129.950504-0127 W/ vertical cateye/oval LED cutout 129.95

E. ROLLED BOTTOM FILLER FOR 99-08 FLHRC WITH OEM LEATHER SADDLEBAGS

A. FOR USE WITH STOCK-LENGTH FENDER OR KLOCK WERKS +2” FENDERS AND STOCK-LENGTH HARD SADDLEBAGS

PART # DESCRIPTION SUG. RETAILSTOCK - SMOOTH STYLE0504-0090 No LED cutout $99.950504-0128 W/ round LED cutout 129.950504-0129 W/ horizontal cateye/oval LED cutout 129.950504-0130 W/ vertical cateye/oval LED cutout 129.95STOCK - DETACHABLE STYLE0504-0091 No LED cutout 99.950504-0131 W/ round LED cutout 129.950504-0132 W/ horizontal cateye/oval LED cutout 129.950504-0133 W/ vertical cateye/oval LED cutout 129.95

C. FOR USE WITH KLOCK WERKS 6” STRETCHED REAR FENDERS AND STOCK-LENGTH HARD SADDLEBAGS

PART # DESCRIPTION SUG. RETAILCONTOUR - SMOOTH STYLE0504-0142 No LED cutout $129.950504-0143 W/ round LED cutout 129.950504-0144 W/ horizontal cateye/oval LED cutout 129.950504-0145 W/ vertical cateye/oval LED cutout 129.95CONTOUR - DETACHABLE STYLE0504-0146 No LED cutout 129.950504-0147 W/ round LED cutout 129.950504-0148 W/ horizontal cateye/oval LED cutout 129.950504-0149 W/ vertical cateye/oval LED cutout 129.95

B. FOR USE WITH KLOCK WERKS 6” STRETCHED REAR FENDERS AND KLOCK WERKS DOUBLE CUT SADDLEBAG EXTENSIONS

PART # DESCRIPTION SUG. RETAILCONTOUR PLUS - SMOOTH STYLE0504-0150 No LED cutout $129.950504-0151 W/ round LED cutout 129.950504-0152 W/ horizontal cateye/oval LED cutout 129.950504-0153 W/ vertical cateye/oval LED cutout 129.95CONTOUR PLUS - DETACHABLE STYLE0504-0154 No LED cutout 129.950504-0155 W/ round LED cutout 129.950504-0156 W/ horizontal cateye/oval LED cutout 129.950504-0157 W/ vertical cateye/oval LED cutout 129.95

D. FOR USE WITH KLOCK WERKS 6” STRETCHED REAR FENDERS AND KLOCK WERKS FULLBACK SADDLEBAG EXTENSIONS

PART # DESCRIPTION SUG. RETAILFULLBACK - SMOOTH STYLE0504-0134 No LED cutout $129.950504-0135 W/ round LED cutout 129.950504-0136 W/ horizontal cateye/oval LED cutout 129.950504-0137 W/ vertical cateye/oval LED cutout 129.95FULLBACK - DETACHABLE STYLE0504-0138 No LED cutout 129.950504-0139 W/ round LED cutout 129.950504-0140 W/ horizontal cateye/oval LED cutout 129.950504-0141 W/ vertical cateye/oval LED cutout 129.95

FOR 93-08 FLT, FLHT, FLHR, FLTR MODELS

LOWER FILLERS•Constructed from 16-gauge steel and E-coated for rust and corrosion resistance and are designed to fill the void between the lower fender and saddlebags; A minor detail that makes a major impact!

•The only steel fillers designed to be used with or without detachables•Detachable style is for use with OEM detachable accessories (available separately)•Great to use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area•LED auxiliary light cutouts are laser cut for precision fit; oval cutout for cateye/oval LEDs measures 1.875” L x 1” W and round cutout’s diameter is 1.625”; LEDs sold separately

•Fillers are available in Standard for stock bags; Extended and Extended Plus for use with Klock Werks Benchmark rear fenders and OEM or Klock Werks saddlebags extensions (and rolled Bottom fillers match the look of the bags and serve to line up the fullback bag extensions and Klock Werks stretched fender)

•All are sold in pairs and include all necessary hardware and instructions to install them•Made in the U.S.A.

E. Smooth StyleOEM Leather Saddlebags

A. Detachable StyleStock-length/+2” FenderStock-length saddlebags

D. Smooth StyleStretched rear fender

Fullback saddlebag extensions

Before Fillers C. Smooth StyleStretched rear fender

Stock length saddlebags

B. Smooth StyleStretched rear fender

Doublecut saddlebag extensions


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

950

PART # DESCRIPTION SUG. RETAIL1401-0287 For 97-08 FLHT, FLHR, FLHX, FLTR models $399.95

EXTENDED REAR FENDER COVER•Designed to work with Cycle Visions Extended Saddlebags PART #s 3501-0544 and 3501-0545; sold separately

•Fiberglass construction with a recess for Cycle Visions Eliminator Taillight, PART #2010-0662; sold separately

•Requires cutting of stock rear fender and purchasing a rear fender brace, PART #1421-0005 or 1421-0006


NOTE: Fender cover has no cut-outs for exhaust.

PART # DESCRIPTION SUG. RETAIL1405-0121 For 09-10 FLHT/FLHR/FLTR models with hard bags

and a 180 rear tire (except 10 FLTRX) $298.951405-0091 For 96-07 FLTR/FLHR/FLHT models w/ OEM hard

bags and OEM 7 1/4” rear fender 298.95

REAR FENDER EXTENSION AND FILLER PANEL•Heavy 18-gauge raw steel construction•Designed to fill in and extend the rear of the fender for a street glide look

•Extends the fender 4” over OEM•Requires custom mounting; no hardware is included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720227 Kit for 97-08 FLT and FLHR models

(except FLHX/FLHRS/FLHRCI) $527.95DS-720229 Fender cover only, 97-08 FLT and FLHR models 339.95DS-720240 Saddlebag extensions only (pr.) 339.95

BAGGER REAR FENDER COVER/SADDLEBAG EXTENSION KIT•Developed to fit directly over existing rear fender; some modification is required

•Fender cover cleans up that ugly gap between fender and factory saddlebags

•Saddlebag extensions can be bolted on, or for custom applications they can be fiberglassed to existing saddlebags

•Kit includes one fiberglass fender cover, two fiberglass saddlebag extensions and all necessary mounting hardware

•Components are available separately•Parts require finishing and painting•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-380511 For 86-99 FXST and FLST $53.95

CHROME FRAME SIDE COVERS•These are the genuine rear frame side covers

•Highly polished, then chrome-plated to add a unique, clean look to the right and left rear frame castings

•Left side cover has two additional holes at the bottom that allow secure mounting and prevent any rattling

PART # DESCRIPTION SUG. RETAIL1902-8001 For 84-07 FXST/FLST models (except

00-07 FXSTD, FLSTF, 05-07 FLSTN) $104.95

ENGINE TURNED DESIGN FRAME INSERTS•Unique, eye-catching design

•Four-piece set held in place with self-adhesive backs


PART # DESCRIPTION SUG. RETAIL1906-0001 For 00-07 FXSTD w/ low exhaust $104.95DS-373977 For 00-07 FLSTF 104.95DS-380513 For 86-99 FXST, FXSTS, FLST models 104.95

BOOMERANG FRAME COVERS•High-quality chrome metal covers

•Wrap around the front and rear edges of the frame for complete coverage

•Not for use with passenger floorboards•Fit belt drive Softail models

R.O.C. Design Patent #37113, U.S. Patent #349,266

PART # DESCRIPTION SUG. RETAILDS-380510 For 84-07 Softail models (except

00-07 FLSTF/FXSTD, 05-07 FLSTN) $15.95

FRAME INSERTS•Four-piece chrome steel insert set dresses up any Softail frame

•Held securely in place by special adhesive tape•Fits neatly into the recessed area of all frame sections

1405-0121

1405-0091

DS-720227

DS-380513 DS-373977


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

951

PART # DESCRIPTION SUG. RETAILDS-222998 For 88-06 FXSTS $179.95DS-333998 For 97-03 FLSTS, 05-07 FLSTSC 179.95

CUSTOM TOP TREES•Chrome-plated billet aluminum•Allows the use of most handlebars or risers with the standard 3.5” bolt center


“MASSIVE GLIDE” TREES•This innovative chrome triple tree set from Ness creates the illusion of an inverted fork using your stock fork legs

•Chrome-plated tree assembly•Comes complete with trees, covers, stem, headlight mount and all necessary hardware


PART # DESCRIPTION SUG. RETAILDS-222036 For 84-99 Wide Glide-style 41mm forks $498.95

CHROME 41MM WIDE GLIDE-STYLE TRIPLE TREES•Available in radius smooth design

•Features cam locks that secure the fork assembly in the trees and a new adjustable headlight mount

•Includes top and bottom aluminum trees, steering stem and Allen top bolt, headlight mount and necessary hardware

•Neck bearings, races, dust shields, bearing cups (if used) and fork stop must be purchased separately


PART # DESCRIPTION SUG. RETAILCHROME106210 3° rake, smooth $543.95106270 3° rake, smooth w/ turn signals 568.95106500 5° rake, smooth 543.95106560 5° rake, smooth w/ turn signals 568.95106800 7° rake, smooth 543.95106860 7° rake, smooth w/ turn signals 568.952040-0005 Repl. amber lens (pr.) 7.95

PART # DESCRIPTION SUG. RETAILBLACK ANODIZED0408-0088 0° rake, smooth $479.950408-0090 0° rake, smooth w/signals 505.950408-0096 3° rake, smooth 543.950408-0098 3° rake, smooth w/ turn signals 568.950408-0100 5° rake, smooth 543.950408-0102 5° rake, smooth w/ turn signals 568.950408-0104 7° rake, smooth 543.952040-0005 Repl. amber lens (pr.) 7.95

41MM WIDE GLIDE TRIPLE TREES•Billet aluminum construction

•Raked trees feature a flush top design that eliminates fork tube nuts

•Come in smooth or ball-milled finish•Raked triple trees designed for custom frames with a 38° or more rake; not designed for stock V-Twin applications

•Trees accept Pro-One fork stop kits PART #DS-222842 or DS-221926 (sold separately)

•Available in chrome and black anodized finish; with or without integral turn signals


NOTE: No fork locking capabilities.

NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications. Not recommended for use on rubber mounted chassis.

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLST, FLSTC, FLSTF WITH STOCK TINS AND NACELLE0408-0238 Smooth chrome $649.950408-0239 Finned black 799.950408-0240 Finned chrome 799.95

41MM RAKED TRIPLE TREES•CNC-machined from billet aluminum•Feature 3° rake•Made in the U.S.A.

NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometery must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications.

FOR 84-10 FXST/FLST AND CUSTOM APPLICATIONS

DS-222998

DS-222926

DS-222949

0408-0102

0408-0096

0408-02380408-0239

106210

PART # DESCRIPTION SUG. RETAILFOR 84-99 WIDE GLIDE WITH 41MM FORKSDS-222926 Grooved $1,049.95DS-222949 Radius 1,049.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

952

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST, FXWG AND CUSTOM APPLICATIONS2406-7417 7° Elite smooth; chrome $598.952406-5415 5° Elite smooth; chrome 598.950408-0281 5° Elite smooth; night series 598.95DS-222530 0° Elite; chrome 514.95

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST, FXWG AND CUSTOM APPLICATIONS (CONT)DS-222230 7° Elite; chrome $598.95DS-222231 5° Elite; chrome 598.95FOR 93-05 FXDWG2406-5416 5° Elite smooth; chrome 598.95

41MM TRIPLE TREES•Chrome-plated, CNC-machined billet aluminum•Stem threads into underside of top triple tree for cleaner look•Available in a smooth or radius groove design•Made in the U.S.A.

NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications.

PART # DESCRIPTION SUG. RETAIL0408-0109 For 84-10 FXST, FXWG and custom

applications; 5° rake $722.95

GOTHIC 41MM TRIPLE TREE•Manufactured from billet aluminum with a chrome-plated finish

•Unique design features a fork stem that threads in from the bottom and hidden stainless steel fork tube caps for a clean, uncluttered top tree

•External fork stops included•Lower tree is also drilled and tapped for an optional internal fork stop•5° rake styles•All hardware is stainless steel•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAILFOR 06-10 FXD MODELS0408-0219 3° rake, mid glide; chrome $640.950408-0259 3° rake, mid glide; night series 640.950408-0220 5° rake, mid glide; chrome 640.950408-0260 5° rake, mid glide; night series 640.95FOR 06-10 FXDWG MODELS0408-0221 3° rake, wide glide; chrome 640.950408-0223 5° rake, wide glide; chrome 640.95

ELITE 49MM TRIPLE TREES•Manufactured from billet aluminum•Available with 3° and 5° rake•Bottom headlight mount•Has fork lock capability•All hardware is stainless steel•Available with a chrome-plated or Night Series finish•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAIL0408-0213 49mm Wide Glide polished triple tree $773.950408-0214 49mm Wide Glide chrome triple tree 610.95

49MM WIDE GLIDE TRIPLE TREES•Precision machined from 6061 T-6 aluminum•For use in custom applications when installing a complete OEM 49mm front end assembly on a 84-10 FXST or custom style frame

•Available in chrome or polished finish•Made in the U.S.A. by Custom Cycle Engineering

2406-5415

0408-0281DS-222530 DS-222230

0408-0219

0408-0259

0408-0213


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

953

PART # DESCRIPTION SUG. RETAIL1809-2150 FXSTD triple tree; repl. OEM #s 45769-00, 45475-00 $336.95

FXSTD-STYLE TRIPLE TREE•Chrome tree includes upper and lower trees and fork stem•Accepts 41mm fork legs and has lock capability

NOTE: Does not include stem nut, stem nut washer or fork pinch bolts.

PART # DESCRIPTION SUG. RETAILDS-222942 For 84-99 FXST, FXWG $561.95

CHROMED ALUMINUM TRIPLE TREES•Precision-machined from 6061 T-6 aluminum, polished, then chrome-plated for a show-quality finish

•Include a fork stem bolt and washer, internal fork stop kit, stem nut cover and all necessary hardware

•Headlight mounting bracket must be ordered separately; see page 954

•Made in the U.S.A. by Custom Cycle Engineering

PART # DESCRIPTION SUG. RETAILDS-222939 Smooth style $269.95

CHROME FL-STYLE TRIPLE TREE•Forged steel construction and highly chromed•A distinctive addition to any Harley Big Twin model with FXST, FXWG and FL fork tubes (41mm)

NOTE: These do not allow fork-lock capability.

PART # DESCRIPTION SUG. RETAILFOR 87-99 WIDE GLIDEDS-222039 Radius smooth triple trees $629.95DS-222958 Disc spacer for dual-disc application (1.440”) 84.95FOR 87-99 MID-GLIDEDS-222038 Radius smooth triple trees 629.95DS-222957 Disc spacer for dual-disc application (.718”) 79.95

CHROME 39MM CONVERSION KITS•Available in Wide Glide and Mid-Glide styles

•Feature smooth radius design•Conversion kits include top and bottom aluminum trees, steering stem, top bolt, headlight mount, axle, axle spacer, disc spacer and fender spacers

•Cam locks secure the fork assembly in the radius design trees•Radius trees include an adjustable-style headlight mount•Made in the U.S.A.

NOTE: For dual-disc models you must order disc spacer.

DS-222939

DS-222038

DS-222957


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

954

PART # DESCRIPTION SUG. RETAIL0408-0208 49mm conversion for 91-99 Dyna Glide $765.950408-0209 49mm conversion for 00-03 Dyna Glide 765.950408-0210 49mm conversion for 04-05 Dyna Glide 765.950408-0211 49mm conversion for 88-94 FXR, 88-99 XL 765.950408-0212 49mm conversion for 00-03 XL 765.950408-0282 49mm conversion for 06-10 FXD 765.95

49MM WIDE GLIDE TRIPLE TREE CONVERSION KITS•Precision-machined from 6061 T-6 aluminum, polished, then chrome-plated for a show-quality finish

•Include triple trees, a fork stem bolt and washer, internal fork stop kit, stem nut cover, axle, disc spacer and all necessary hardware

•Headlight mounting bracket must be ordered separately•Made in the U.S.A. by Custom Cycle Engineering


RETAILDS-222518 39mm mid-glide kit for 00-03 Dyna Glide models $704.95DS-222829 39mm mid-glide kit for 91-99 Dyna Glide models 704.95DS-222517 39mm mid-glide kit for 00-03 FXR

and 00-03 XL models 704.95DS-222828 39mm mid-glide kit for 87-94 FXR

and 88-99 XL models 704.95DS-222997 Disc spacer for 39mm 87-99 dual-disc

applications (.940”) 85.95DS-280291 Stock narrow glide headlight/visor mount

brackets for rubber-mount risers 49.95DS-222834 Fender spacers for 39mm forks .95” wide 59.95

CHROMED ALUMINUM MID-GLIDE CONVERSION KITS•Truly unique looks – turns any 87-03 narrow glide front end into a mid-glide front end, which is between a narrow glide and a Wide Glide

•Precision machined from 6061 T-6 aluminum, polished, then chrome-plated for a show-quality finish

•Include an Internal Fork Stop system that fits stock Harley or any other aftermarket frame; also include neck stem, top nut cover, axle, axle spacer and rotor spacer

•PART #DS-222828 comes equipped with external locking device•For models with dual-disc applications, order an extra disc spacer; sold separately



RETAILDS-222516 For 00-03 Dyna Glide models $704.95DS-222902 For 91-99 Dyna Glide models 704.95DS-222515 For 00-03 FXR and XL models 704.95DS-223010 For 87-94 FXR and 88-99 XL models 704.95DS-222502 Disc spacer for 00-03 dual-disc applications (1.440”) 85.95DS-222941 Disc spacer for 87-99 dual-disc applications (1.440”) 85.95DS-285008 Short bottom-mount headlight bracket 53.95DS-285009 Long bottom-mount headlight bracket 53.95DS-222908 Fender spacers for 39mm Wide Glide fork kits 59.95

39MM BILLET ALUMINUM WIDE GLIDE TRIPLE TREE CONVERSION KITS•Precision chrome-plated 6061 T-6 billet aluminum triple trees

•Kit includes triple trees with internal fork stop, axle, axle spacer, rotor spacer and stem nut


PART # DESCRIPTION SUG. RETAILDS-222836 For PART #s DS-223010,

DS-222828 and DS-222829 $76.95

INDICATOR LIGHT PANEL•Chrome panel encapsulates the stock indicator lights

•Allows for a neat and functional method of mounting indicator lights

•Polarizing plate is provided for those lights with symbols

•Fits neatly into the oval hole on Custom Cycle Engineering’s top triple trees

•Made in U.S.A. by Custom Cycle Engineering

0408-0208

0408-0209

DS-222828

DS-223010

DS-280291 DS-222834

DS-285008

DS-285009


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

955

PART # DESCRIPTION SUG. RETAILFOR 04-05 FXD0408-0057 0° rake, Wide Glide $823.95FOR 00-03 FXD2406-3906 0° rake, Wide Glide 823.952406-2412 3° rake, Wide Glide 842.95FOR 08-10 XL0408-0277 0° rake, Wide Glide 823.950408-0272 3° rake, Wide Glide 842.95FOR 04-07 XL0408-0081 3° rake, Wide Glide 842.95FOR 00-03 XL2406-2414 3° rake, Wide Glide 842.95FOR 87-99 XL, 87-94, 99 FXR2406-3903 0° rake, Wide Glide 823.95

PART # DESCRIPTION SUG. RETAILFOR 04-05 FXD0408-0070 3° rake, Wide Glide $842.95FOR 91-99 FXD2406-2405 3° rake, Wide Glide 842.95FOR 08-10 XL0408-0262 3° rake, Mid Glide 842.950408-0274 3° rake, Wide Glide 842.95FOR 04-07 XL0408-0080 3° rake, Mid Glide 842.950408-0082 3° rake, Wide Glide 842.95FOR 00-03 XL2406-2415 3° rake, Wide Glide 842.95FOR 87-99 XL, 87-94, 99 FXR2406-2403 3° rake, Mid Glide 842.952406-2407 3° rake, Wide Glide 842.95

PART # DESCRIPTION SUG. RETAILFOR 04-05 FXD0408-0058 0° rake, Wide Glide $823.95FOR 04-07 XL0408-0074 0° rake, Wide Glide 823.95

PART # DESCRIPTION SUG. RETAILFOR 00-03 FXD2406-2053 3° rake, Wide Glide $842.95FOR 08-10 XL0408-0276 0° rake, Wide Glide 823.950408-0271 3° rake, Wide Glide 842.95FOR 04-07 XL0408-0085 3° rake, Wide Glide 842.95FOR 87-99 XL, 87-94, 99 FXR2406-2047 3° rake, Wide Glide 842.95

PART # DESCRIPTION SUG. RETAILDISC SPACERS FOR DUAL-DISC APPLICATIONSDS-222167 For 00-03 Wide Glide (1.405”) $109.95DS-222170 For 87-99 Wide Glide (1.405”) 109.95

PART # DESCRIPTION SUG. RETAILDISC SPACERS FOR DUAL-DISC APPLICATIONS (CONT)DS-222168 For 00-03 Mid Glide (.707”) $109.95DS-222169 For 87-99 Mid Glide (.707”) 109.95

39MM TRIPLE TREE CONVERSION KITS•Chrome-plated CNC-machined T-6 billet aluminum with Elite, Elite smooth, Smooth and Gothic design

•Available with standard (0°), 3° or 5° rake triple trees with top OEM style or bottom headlight mount style

•Kits include upper and lower trees, stem with nut, fork stop, axle with spacers, fender and rotor spacers

•Accept stock fork assembly, front fender, front wheel and headlight

•Neck post bearings and races are not included

•Include a single disc spacer•Made in the U.S.A.


TOP HEADLIGHT MOUNT STYLE

BOTTOM HEADLIGHT MOUNT STYLE

PART # DESCRIPTION SUG. RETAILFOR 08-10 FXD MODELS0408-0267 3° rake; chrome $846.950408-0268 3° rake; night series 846.950408-0269 5° rake; chrome 846.950408-0270 5° rake; night series 846.95

PART # DESCRIPTION SUG. RETAILFOR 06-07 FXD MODELS0408-0222 3° rake; chrome $846.950408-0224 5° rake; chrome 846.95

49MM WIDE-GLIDE CONVERSION KITS•Manufactured from billet aluminum•Available with 3° and 5° rake•Include triple trees, rotor spacer, fender spacers, axle spacers, axle and instructions•Available with a chrome-plated or Night Series finish•Made in the U.S.A.


ELITE STYLE ELITE SMOOTH STYLE SMOOTH STYLE

PART # DESCRIPTION SUG. RETAILFOR 00-03 XL2406-2054 3° rake, Wide Glide $842.95FOR 87-99 XL, 87-94, 99 FXR2406-2042 3° rake, Mid Glide 842.952406-2046 3° rake, Wide Glide 842.95

SMOOTH STYLEPART # DESCRIPTION SUG. RETAILFOR 08-10 XL0408-0264 0° rake, Mid Glide $823.950408-0261 3° rake, Mid Glide 842.950408-0278 0° rake, Wide Glide 823.950408-0273 3° rake, Wide Glide 846.95FOR 04-07 XL0408-0084 3° rake, Mid Glide 842.950408-0086 3° rake, Wide Glide 846.95

PART # DESCRIPTION SUG. RETAILFOR 04-05 DYNA0408-0150 5° rake, Wide Glide $869.95FOR 08 XL0408-0265 0° rake, Mid Glide 869.950408-0263 3° rake, Mid Glide 869.950408-0266 5° rake, Mid Glide 869.950408-0279 0° rake, Wide Glide 869.950408-0275 3° rake, Wide Glide 869.950408-0280 5° rake, Wide Glide 869.95FOR 04-07 XL0408-0129 5° rake, Mid Glide 869.950408-0141 3° rake, Wide Glide 869.950408-0147 5° rake, Wide Glide 869.95FOR 00-03 XL0408-0128 5° rake, Mid Glide 869.95

ELITE STYLE ELITE SMOOTH STYLE GOTHIC STYLE

0408-0150

2406-2053

2406-3906

0408-0224

2406-2046


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

956

PART # DESCRIPTION SUG. RETAILDS-222943 Wide Glide kit for single disc 87-99 FXR and XL $663.95DS-222951 Wide Glide kit for single disc 91-99 Dyna Glide 663.95DS-222944 Chrome headlight mount brackets to mount OEM

headlight/visor to PART #s DS-222943/DS-222951 71.95

39MM CHROME STEEL WIDE GLIDE-STYLE TRIPLE TREE CONVERSION KITS•Converts 39mm narrow glide to Wide Glide width on single-disc Dyna Glide, FXR and XL models

•Fork tubes are clamped through the upper and lower trees with pinch bolts

•Top tree accommodates the stock handlebar dampers; lower tree locks the front fork assembly to the frame

•Kits include chromed steel upper and lower trees, fork stops, one aluminum disc spacer (1.440”), 10 socket head screws, axle spacers, one axle and a crown or top nut


NOTE: Lower tree is drilled to accept bottom-mount headlight mount.

PART # DESCRIPTION SUG. RETAILDS-222932 Narrow $47.95DS-222933 Split 47.95

FORK STOPS FOR WIDE GLIDE•Forks stops available for narrow FX, XL or split tanks•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-88 BIG TWIN MODELSDS-222842 Hide-Away fork stop kit $116.95FOR 89-99 FXST/FLST AND 93-95 FXDWG MODELSDS-221926 Internal fork stop kit 88.95

FORK STOP KITS•Work on all Pro-One triple trees and many others

•Installation on other trees may require some drilling

•Available in two styles•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-222968 Fork stop $59.95

PART # DESCRIPTION SUG. RETAILFOR 85 FX; 85-86 FXWG; 84-10 FXST, FLST; 86-10 XL, 84-94 FXR; 91-10 DYNA GLIDE, 84-10 FLT, FLHT, FLTR, FLHR AND 02-10 V-ROD22-1032 Neck post bearing and race set; repl. OEM #s

48300-60 bearing and 48315-60 race $22.950410-0090 Bearing and race set 9.950410-0091 Neck post bearing only; repl. OEM #48300-60 (ea.) 6.95

STEERING STEM BEARINGS AND KITS•PART #22-10320 neck post bearing and race complete replacement set (includes two bearings, two races and two dust seals)

•Neck post bearing/race set and neck post bearing also available individually

PART # DESCRIPTION SUG. RETAIL1809-8001 Conversion kit for 00-06 single disc

(except 04-06 FXD models) $177.951809-8002 .8750” disc spacer (required for dual-disc

applications on 00-06 models) 85.95DS-222964 Conversion kit for 84-99 single disc 177.95DS-222963 1.050” spacer (required for dual-disc

applications on 84-99 applications) 85.95

NARROW-TO-WIDE GLIDE CONVERSION KITS•Allow the use of narrow glide 19” or 21” wheel (found on FX, FXR, FXD and XL models) to be installed in a 41mm Wide Glide front end

•Include aluminum disc spacer (second spacer for dual disc available), socket head screws, axle spacer and axle

•Spacer and axle are cadmium plated; disc spacer is chrome plated•Made in the U.S.A.

DS-222943

1809-8001

DS-222944

DS-222932 DS-222933

DS-222964

1809-8002

DS-222842

DS-221926

0410-0090

22-1032

PART # DESCRIPTION SUG. RETAILDS-222874 For most 84-99

Wide Glide models $62.95

CHROME ADJUSTABLE STEERING STOP•Machined from billet aluminum, chrome finish•Made in the U.S.A.

UNIVERSAL FORK STOP•Polished stainless steel construction

•Has two pinch-type stops on a horseshoe bracket that bolts to the lower triple tree

•For custom applications•Made in the U.S.A.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

957

PART # DESCRIPTION SUG. RETAILFOR 85 FX; 85-86 FXWG; 84-10 FXST, FLST; 86-10 XL, 84-94 FXR; 91-10 DYNA GLIDE, 84-10 FLT, FLHT, FLTR, FLHR AND 02-10 V-RODDS-222700 Timken bearing and race set $13.95DS-222855 Neck post bearing only; repl. OEM #48300-60 (ea.) 10.95DS-222860 Race only; repl. OEM #48315-60 (ea.) 5.95

NECK POST BEARING AND RACES•Genuine Timken® brand•Sold individually for various H-D models•Made in the U.S.A.


RETAIL0410-0018 For 85 FX; 85-86 FXWG;

84-88 FXST and FLST models $104.95

NECK POST BEARING KIT•Includes two Timken neck post bearings, two chromed bearing cups and two chromed dust covers

PART # DESCRIPTION SUG. RETAILFOR 85 FX, 85-86 FXWG AND 84-88 FXST/FLST1305-0700 Chrome bearing

cups w/ races installed (pr.) $44.95

DS-222800 Chrome bearing cups w/o races installed (pr.) 27.95

DS-222860 Race (ea.) 5.95

NECK POST BEARING CUPS•Chrome Timken-type bearing cups•Cups sold in pair, races sold each

PART # DESCRIPTION SUG. RETAILFOR 84-10 BIG TWIN AND 00-10 FXST/00-05 FXDWG MODELSDS-222776 Chrome nut w/ dust

cover; repl. OEM #48330-86A (ea.) $19.95

DS-222777 Zinc nut w/o dust cover; repl. OEM #48332-48B/C (ea.) 8.95

STEERING STEM BEARING ADJUSTING NUTS•Adjusting nuts are available in a chrome finish with dust cover or a zinc finish without a dust cover

PART # DESCRIPTION SUG. RETAILDS-222961 For 84-10 Big Twin

(except 06-10 Dyna Glide) models; repl. OEM #s 48361-80/48365-48A $6.95

FORK STEM DUST COVERS•Upper and lower set of zinc-plated dust covers•For use with Timken bearings•Sold in pairs


RETAILFOR 89-10 FLST, FXR, FXD AND XL MODELS2401-0117 Stem bolt and washer kit;

repl. OEM #4453 / 6655 $9.952401-0118 Chrome plated stem cap 9.95

STEM BOLT KIT•Zinc-plated stem bolt with washer

•Chrome-plated stem cap available separately


PART # DESCRIPTION SUG. RETAILDS-222158 For 84-10 Wide

Glide models $17.95

STEM NUT LOCK WASHERS•Stem nut lock washers for triple trees; replaces OEM #45717-63

•Sold in 10-pk.•Made in the U.S.A.


RETAIL0410-0100 For 87-10 XL, FXD

and FXR models w/ 39mm forks $9.95

STEERING STEM BOLT COVER•Billet aluminum construction with a chome-plated finish

•Fits over steering stem bolt•Sold each

PART # DESCRIPTION SUG. RETAILFOR 87-10 FXD, FXR AND XL MODELS0410-0108 Black anodized $39.950410-0109 Chrome-plated 42.950410-0110 Clear anodized 39.95

STEERING STEM BOLT AND TRIM COLLAR FOR XL, FXD AND FXR MODELS•Replace that crude “hardware store” look on your Sportster with one of these steering bolt and trim washer kits

•Features a high-strength alloy Allen head cap screw surrounded by a CNC-machined billet aluminum trim collar

•Available in your choices of black and clear anodized, or chrome finishes

•The black or clear units look great with black triple trees•Our chrome plated version looks great on polished or chrome triple trees

•Installs in minutes with a 1/2” Allen wrench


1305-0700DS-222800

DS-222777

2401-0117 2401-0118

0410-1008

0410-1009 0410-0110


RETAILFOR 85-10 FL, 85-86 FXWG, 84-10 FXST/FXSTC, 93-08 FXDWGDS-193009 Acorn nut; (repl.

OEM #45718-60) $131.95FOR 85 FX, 85-87 FXR/FXRS/FXRT AND 85-87 XLDS-193619 Hex nut; (repl.

OEM #45718-71) 23.95

STEM NUTS•Chrome-plated replacement stem nuts for a variety of stock and custom front ends and triple trees

•Sold individually


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

958

0410-0092

FORK STEM CAP NUTS•Quality billet aluminum construction•Chrome-plated•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1913-3001 Most 84-10 Wide Glides $13.95

CHROME FORK STEM NUT CAP•Sold separately•Replaces OEM #45670-80•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR ALL 86-08 FLST MODELSDS-222910 3-piece fork tins; repl. OEM #67808-86,

67816-86, 67820-86 $92.95DS-222911 5-piece fork tins; repl. OEM #67808-86,

67816-86, 67820-86, 45964-86 124.95DS-222898 Chrome slider covers; repl. OEM #45964-86 (pr.) 38.95

CHROME FORK TINS AND SLIDER COVERS•High-quality chromed reproduction fork tins

•Slider covers can also be purchased separately

NOTE: Models equipped with front passing lights may need a hole drilled in the rear panel for on/off switch.

NOTE: Always check slider covers for proper clearance.

NOTE: Bottom area of slider covers may need to be formed slightly to clear lower legs and fender.

PART # DESCRIPTION SUG. RETAILDS-222937 Std. (61/2”) for 84-88 FLT, FLHT

models; repl. OEM #45964-49 $39.95

CHROME FORK SLIDER COVERS•Sold in pairs

NOTE: Bottom portion of slider covers may need to be formed slightly to clear lower legs and fender.

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT, FLHT AND 86-10 FLST MODELS0411-0001 Black $299.950411-0002 Chrome 299.950411-0009 Black diamond-edge 399.95

FORK BELLOWS•CNC-machined from billet aluminum•Sold in pairs•Made in the U.S.A.

NOTE: When installing on FLST models or other models with a custom front fender, check fender clearance before operating the motorcycle.

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLST/C/N, FLHR, FLTR, FLT AND 90-10 FLSTF0411-0003 Chrome $219.950411-0004 Black 219.950411-0007 Black diamond cut 299.95FOR 86-10 FLHT AND 06-10 FLHX0411-0005 Chrome 219.950411-0006 Black 219.950411-0008 Black diamond cut 299.95

RETRO FORK BOOT COVERS•Replaces OEM lower fork leg covers

•Machined from forged 6061 T-6 billet aluminum

•Available in chrome, black anodize and black anodize with diamond cut edges


RETAIL0412-00971 For 84-10 FLHT/FLHR/FLHS;

repl. OEM #58121-85B $60.951 Not for models equipped with fairing

lowers or lighted fork slide kit.

WIND GUARDS•Chrome plated•Mount easily to front fork brackets

•Deflect wind away from legs and feet

•Made in the U.S.A. FRONT FORK AIR BAFFLE•Chrome-plated stamped steel•Designed to deflect the elements away from the driver PART # DESCRIPTION SUG. RETAIL

DS-222139 For 85-99 FXWG, FXST/C; repl. OEM #s 67773-80 and 67773-80A $21.95

CHROME LOWER TRIPLE TREE COVER•Used to cover up the casting on the lower triple tree

PART # DESCRIPTION SUG. RETAILDS-222979 For 84-10 FLT and FLHT;

repl. OEM #58520-79B $21.95

0410-0093 0410-00940410-0095

DS-222910

0411-0001

0411-00090411-0002

0411-0004

0411-0007

0411-0003

PART # DESCRIPTION SUG. RETAILFOR 84-10 WIDE GLIDE MODELS (EXCEPT 06-10 FXDWG)0410-0092 Warrior $39.950410-0093 Speed mill 39.950410-0094 Reflections 39.950410-0095 Nasty 39.95

DS-222898

DS-222911


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

959

P-181-ST

PART # DESCRIPTION SUG. RETAILWIDE SPRINGER W/O SHOCKP-181-ST Standard; 25” L $1,384.95P-181-3 +3” over stock; 28” L 1,384.95

PART # DESCRIPTION SUG. RETAILWIDE SPRINGER W/ SHOCKP-S181-ST Standard; 25” L $1,619.95P-S181-3 +3” over stock; 28” L 1,619.95

PART # DESCRIPTION SUG. RETAILAXLESP-186B1 3/4” axle kit; OEM brake $97.95P-186A1 3/4” axle kit; PM brake 97.95

CUSTOM WIDE SPRINGER FRONT FORKS•Classic springer looks with quality second to none from the premier springer manufacturer

•Wide springer without shock features mounting points for dual disc brakes; no front fender mounting points

•Wide springer with shock has a front fender mount similar to the 88-92 FXSTS

•Distance between rear legs is 85/16”; outside width is 91/2”

•Forks come assembled and include fork neck, top nut, crown nut, riser-style top clamp and inner springs

•Both springers use standard 1” neck bearings•Require use of the Paughco axle, available separately; fork recommended for 21” wheels only

•Require 1/2-20 riser stud/bolt

NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25” stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of an FXSTS springer fork would be +3” over stock (28” total).

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST, FLST, 84-94 FXR, 86-03 XL AND MOST CUSTOM FRAMES THAT USE A 1” NECK BEARING1809-2618 30” springer fork $2,311.951809-2619 33” springer fork 2,376.951809-2620 36” springer fork 2,439.95

NARROW SPRINGER FORKS WITH TAPERED REAR OVAL LEGS•Forks come complete with axle, axle spacers, top nut, crown nut and top triple tree (for stock-style handlebar risers)

•Do not include shocks or fender mounts•Available in three lengths: 30”, 33” and 36”•Made in the U.S.A.

NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot.

NOTE: For use with a narrow glide wheel assembly only. PART # DESCRIPTION

SUG. RETAIL

FOR 84-10 FXST, FLST, 84-94 FXR, 86-03 XL AND MOST CUSTOM FRAMES THAT USE A 1” NECK BEARING1809-2610 27” springer $2,248.951809-2612 33” springer 2,376.951809-2613 36” springer 2,440.951809-2614 39” springer 2,504.95


RETAILFOR 84-10 FXST, FLST, 84-94 FXR, 86-03 XL AND MOST CUSTOM FRAMES THAT USE A 1” NECK BEARING (CONT)1809-2615 42” springer with 3° rake $2,568.951809-2616 45” springer with 3° rake 2,632.951809-2617 48” springer with 3° rake 2,696.95

TAPERED LEG WIDE SPRINGER FRONT FORKS•Feature a tapered leg design like that found on the new-style OEM springer•Springer forks come in seven lengths and do not have a shock or fender mounts•The 42”, 45” and 48” springers have a built-in 3° rake so you have less front-end flop•Each fork includes an axle, axle spacers, top nut, crown nut and top triple tree (for stock-style handlebar risers)


NOTE: Overall length is measured from the top of the top clamp to the center of the rear leg pivot.

FOR ALL 36-10 BIG TWINS (EXCEPT FLT, FLHT, FLHR, FLTR, 04-07 FXD/FXDWG) AND ALL 82-03 XL MODELSFOR ALL 84-10 BIG TWINS (EXCEPT FLT, FLHT, FLHR, FLTR, 04-10 FXD/FXDWG) AND ALL 86-03 XL MODELS

P-S181-STP-181-3

1809-2610 1809-2613

1809-2612

1809-2617

1809-2619


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

960

PART # DESCRIPTION SUG. RETAILSINGLE-DISC APPLICATIONSDS-219884 For 00-06 FXST, 00-05 FXDWG

41mm forks (except FXSTD) $199.95DS-219886 For 00-07 39mm forks 199.95DS-219881 For 88-99 39mm forks 199.95

FORK SKINS™•An economical way to chrome the front fork lower legs

•Include a fork brace for superior handling

•Easy installation; no disassembly required


RETAIL0403-0017 For 00-07 FLHT/FLHR/FLTR and FLHX $279.950403-0018 For 08-10 FLHT/FLHR/FLTR and FLHX (do not include caliper covers) 199.95

LOWER LEG ACCENTS•Quick, easy way to add a beautiful chrome finish on lower fork legs (fender bosses down) and brake caliper brackets

•Does not require the front end to be dismantled for installation

•Stamped steel construction with a durable chrome finish

•Sold as a complete kit

PART # DESCRIPTION SUG. RETAIL0403-0022 For 86-10 FLST, 84-10 FXST, 93-05

FXDWG, 85-86 FXWG, 84-01, 06-10 FLT, FLHT, FLHX, FLTR, 94-10 FLHR $59.95

41MM FORK LEG ASSEMBLY REBUILD KIT•Complete kit, includes all parts needed for a complete rebuild of one set of 41mm front fork leg assemblies

•Kit includes: two fork boots, two oil seal caps, two oil seal retaining rings, two fork O-ring caps, four damper tube seal rings, two fork slider washers, two lower fork tube bushings, two fork slider oil seals, two fork slider upper bushings, two dust seals, two fork tube cap O-rings and two oil seal retaining rings

PART # DESCRIPTION SUG. RETAIL2401-0115 For 84-10 FX, FXR and XL models $4.952401-0116 For 84-10 FXWG, FLT and Softail 5.95

FORK SLIDER DRAIN SCREWS•Chrome-plated button head Allen screws with copper compression washers


PART # DESCRIPTION SUG. RETAIL2401-0392 For 84-10 FXWG, FLT, Softail; repl. OEM #45790-80C $5.952401-0393 For 84-10 FX, FXR and XL models; repl. OEM #45790-80BH 3.952401-0394 For 94-05 Dyna and 99-00 FXR; repl. OEM #45790-80CS 3.95

FORK DRAIN SCREW KITS•Kits include chrome button screws and seal washers


RETAILFOR 84-10 W/ 41MM TUBES; REPL. OEM #45858-77DS-190710 Polished, Allen-head $5.952401-0291 Chrome, Allen-head 4.952401-0292 Chrome, button-head 5.95FOR 84-10 W/ 39MM TUBES (EXCEPT XL1200S); REPL. OEM #45790-80DS-190713 Chrome, Allen-head 2.95

FORK DRAIN PLUGS•Sold in pairs (Allen-head kits include Allen wrench)


PART # DESCRIPTION SUG. RETAILFOR 86-99 FLST/F/N, L85-99 FXST/C, L85-86 FXWG, 93-99 FXDWG AND L84-96 FLT MODELS0404-0031 22.25” $252.951809-0028 24.25” (OEM length) 265.951809-0029 26.25” 277.951809-0030 28.25” 290.951809-0031 30.25” 310.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 FLST/F/N, L85-99 FXST/C, L85-86 FXWG, 93-99 FXDWG AND L84-96 FLT MODELS (CONT)1809-0032 32.25” $335.951809-0033 34.25” 366.951809-0034 36.25” 385.951809-0035 38.25” 398.95

HARD CHROME FORK TUBE ASSEMBLIES•Assemblies come complete with fork tubes, springs, damping rods, bushings, clips, seals, slider tube caps, fork tube plugs and O-rings

•Available in a wide range of lengths for virtually any custom application


NOTE: Customer must install fork oil.

DS-219881

0403-0017

2401-0115

2401-0393

2401-0394

DS-190713

DS-190710

1809-0028

1809-0035


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

961

PART # DESCRIPTION SUG. RETAIL1809-2160 41mm 00-06 Deuce-style fork leg assemblies;

repl. OEM #s 46064-00 and 46066-00 $586.95

41MM DEUCE-STYLE FORK LEG ASSEMBLIES•Complete assemblies include stock-length fork tubes, chrome lower legs, dust covers, bushings, springs, damper tubes and seals

•Lower legs have vertical fender mounting holes

•Accept 00-06 style single-disc brake

•Sold in pairs

NOTE: Do not come with fork oil. PART # DESCRIPTION

SUG. RETAIL

1809-2140 00-06 FXSTD fork assembly; repl. OEM #45343-00 $864.95

FXSTD-STYLE FRONT FORK ASSEMBLY•Stock-length fork assembly includes chrome triple trees, chrome fork legs with satin fork tubes, all internal components and axle with spacer

•Triple trees accept FXSTD risers or standard risers when used with riser inserts PART #DS-289290

•For use with 00-06 single-disc-style brake

NOTE: Fork assembly does not include fork oil, top tree nut and washer (use PART #DS-189813) or fork pinch bolts.

PART # DESCRIPTION SUG. RETAILFOR 00-06 FXST, 00-05 FXDWG (ALL EXCEPT FXSTD)0403-0023 Chrome $699.950403-0024 Black 699.95FOR 00-06 FLST/FLSTF/FLSTC/FLSTN0403-0027 Chrome 699.950403-0028 Black 699.95

PART # DESCRIPTION SUG. RETAILFOR 00-07 FLHT/FLHR0403-0025 Chrome $699.950403-0026 Black 699.95OPTIONAL BILLET ALUMINUM COW BELLS0412-0179 Chrome 199.950412-0180 Black 199.95

KING LOUIE 41MM LOWER LEGS•Feature hidden axle and removable front caliper and fender mounts

•Made from T-6 aluminum•Available in chrome or gloss black powder coat finish

•Optional billet aluminum cow bells available separately•Made in the U.S.A.

NOTE: Work with stock cow bells (fork slider covers).

PART # DESCRIPTION SUG. RETAILFOR 08-10 FLHT, FLHR, FLHX, FLTR0403-0029 Smooth, chrome $549.950403-0030 Smooth, black 549.950403-0033 Deep Cut, chrome 549.950403-0034 Deep Cut, black 549.95

PART # DESCRIPTION SUG. RETAILFOR 00-07 FLT, FLHT, FLHR, FLHX, FLTR0403-0031 Smooth, chrome $549.950403-0032 Smooth, black 549.950403-0035 Deep Cut, chrome 549.950403-0036 Deep Cut, black 549.95

HOT LEGS FORK LEG SETS•Tapered billet machined design with hidden axle drastically cleans up front end of FLT

•Offered in Smooth and Deep Cut designs in either chrome or black anodize

•Easily convertible to single-disc applications (block-off kit sold separately)

•Combine with a set of Ness fork boots for the complete look

PART # DESCRIPTION SUG. RETAILCHROME114020 Smooth, round $757.950403-0007 Missile-style 757.95

PART # DESCRIPTION SUG. RETAILCHROME (CONT)0403-0008 Rocket-style $757.95

PART # DESCRIPTION SUG. RETAILBLACK0403-0005 Smooth, round $757.95

STOCK LENGTH BILLET LOWER FORK LEGS•Include removable caliper brackets for single- and dual-caliper applications (except Missile and Rocket style legs)

•Accept stock or custom calipers using 11.5” rotors (calipers not included)

•Feature hidden billet aluminum fender supports•Available in black anodized or chrome finish; Missile and Rocket styles only available in chrome


FOR 84-99 FXST, 93-99 FXDWG AND 85-86 FXWG

HOT LEGS FORK LEG SETS

114020

0403-0033 0403-0034

0403-0007 0403-0008 0403-0005

SINGLE-DISC BLOCK-OFF PLATE KITS


RETAIL0403-0037 Chrome $49.950403-0038 Black 49.95

0403-0023

0412-0179


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

962

PART # DESCRIPTION SUG. RETAILFOR 87-94 FXR, 91-05 FXDL, FXD AND 87-07 XL MODELS (EXCEPT 1200S, 00-05 FXDX/FXDXT)0404-0069 22.25” $375.950404-0064 24.25” 379.950404-0065 26.25” 383.950404-0066 28.25” 387.950404-0067 30.25” 393.950404-0068 32.25” 397.95

PART # DESCRIPTION SUG. RETAILFOR 00-10 FLSTC/F, FXST (EXCEPT FXCW/FXCWC), 00-05 FXDWG, 97-01 FLT, 97-10 FLHR AND 06-10 FLHT/FLHX/FLTRMODELS0404-0070 20.25” $367.950404-0071 22.25” 371.950404-0072 24.25” 375.950404-0073 26.25” 379.950404-0074 28.25” 383.950404-0075 30.25” 387.95FOR 86-99 FLST/F/N, L84-99 FXST/C, 85-86 FXWG, 93-99 FXDWG, L84-96 FLT AND FLHT0404-0076 20.50” 367.950404-0077 22.25” 371.950404-0060 24.25” 375.950404-0061 26.25” 379.950404-0062 28.25” 383.950404-0063 30.25” 387.95

PART # DESCRIPTION SUG. RETAILFOR 06-10 FXD/FXDWG0404-0049 23.50” $375.950404-0050 25.50” 379.950404-0051 27.50” 383.950404-0052 29.50” 387.950404-0053 31.50” 394.950404-0054 33.50” 398.950404-0055 35.50” 402.950404-0056 37.50” 408.950404-0057 29.50” 412.95

HARD CHROME FORK TUBES•Finish is electrolyzed for increased hardness of 55-60 Rockwell•Increased hardness for better long lasting corrosion resistance•Smoother finish creates less drag and seal wear•Not as bright of finish as chrome, but more durable•Check length before ordering•Sold in pairs•Lengths given for OEM replacements may not be the exact OEM length•Made in the U.S.A.


RETAILFOR 84-86 FXRS; 86 FXR; 85 FXSB, FXE/F; 86-87 XL MODELSDS-221420 23.50” (Repl. OEM #

45407-83 FXE/F, FXR/S, XL) $181.95

DS-221421 25.50” (Repl. OEM #45392-83 FXSB, FXRT) 185.95

DS221422 27.50” 189.95DS-220126 29.50” 194.95


RETAILFOR 87-94 FXR, 91-05 FXDL, FXD AND 87-07 XL MODELS (EXCEPT 1200S, 00-05 FXDX/FXDXT)DS-221470 22.25” $187.95DS-221471 24.25” (Repl. OEM

#45360-90 FXR, XL) 191.95DS-221472 26.25” 196.95DS-221473 28.25” 200.95DS-220123 30.25” 206.95DS-220124 32.25” 210.95DS-220125 34.25” 214.95


RETAILFOR 00-10 FLSTC/F, FXST (EXCEPT FXCW/FXCWC), 00-05 FXDWG, 97-01 FLT, 97-10 FLHR AND 06-10 FLHT/FLHX/FLTR MODELSDS-220109 20.25” (Repl. OEM #

45890-97 FLT/FLHT) $179.95DS-220115 22.25” (Repl. OEM #

45930-00 FLST/C/F) 183.95DS-220111 24.25” (Repl. OEM #

45417-00 FXST/C, FXDWG) 187.95DS-220112 26.25” 191.95DS-220113 28.25” 196.95DS-220114 30.25” 200.95DS-220119 32.25” 206.95DS-220120 34.25” 210.95DS-220121 36.25” 214.95DS-220122 38.25” 222.95FOR 86-99 FLST/F/N, L84-99 FXST/C, 85-86 FXWG, 93-99 FXDWG, 85-96 FLT AND FLHTDS-221425 20.25” (Repl. OEM #

45827-84 FLT, FLHT) 179.95DS-221426 22.25” (Repl. OEM #

45930-86 FLST/C/F/N)) 183.95DS-221427 24.25” (Repl. OEM #45417-

84 FXST/C, FXWG, FXDWG) 187.95


RETAILFOR 06-10 FXD/FXDWG0404-0033 23.50” $187.950404-0034 25.50” (Repl. OEM#

46605-06 FXD) 191.950404-0035 27.50” (Repl. OEM#

46617-06 FXDWG) 196.950404-0036 29.50” 200.950404-0037 31.50” 206.950404-0038 33.50” 210.950404-0039 35.50” 214.950404-0040 37.50” 218.950404-0041 39.50” 222.95

SHOW CHROME FORK TUBES•Designed to fit a widevariety of models

•Sold in pairs•Lengths given for OEM replacements may not be the exact OEM length



RETAILFOR 86-99 FLST/F/N, L84-99 FXST/C, 85-86 FXWG, 93-99 FXDWG, 85-96 FLT AND FLHT (CONT)DS-221428 26.25” $191.95DS-221429 28.25” 196.95DS-221435 30.25” 200.95DS-221436 32.25” 204.95DS-221437 34.25” 210.95

0404-0049

DS-221420 DS-221471 DS-221472

DS-221425

0404-0033

35MM 41MM (CONT)

49MM

39MM

49MM

41MM

41MM

39MM


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

963

FORK SPRINGS•High-quality, high-performance replacement fork springs•A Progressive Suspension rate spring has the advantage of a rising rate resistance to compression•The benefit of this is that the spring can be soft enough at the start of the travel to offer a “plush” ride, yet firm enough at the end of the travel to soak up the big bumps

•Spring rates have been chosen to reduce front end drive during braking, yet still provide excellent ride comfort•Sold in pairs•Made in the U.S.A.

FORK TUNING KITS•Adjustable dual-rate fork springs provide a soft initial ride and then crossover to a firmer, higher rate for potholes and other large bumps

•Each set consists of a long spring, a short spring, pre-load spacer material (in most cases), separating washers and three different metal spacers that determine the crossover from soft to firm

•Changing the metal spacers allows for differences in rider weight, style, conditions and personal preferences

•The perfect complement to Works Performance rear shocks•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL84-10 FLST, FXST, 93-05 FXDWG, 85-86 FXWG, 84-01 FLT, FLHT, 94-10 FLHR, 06-10 FLHT, FLHR, FLHX, FLTR (41MM)FRSP-S323480 .80kg/mm spring $109.95FRSP-S323485 .85kg/mm spring 109.95FRSP-S323490 .90kg/mm spring 109.95FRSP-S323495 .95kg/mm spring 109.95FRSPS323410 1.00kg/mm spring 109.9593-05 FXD, 94-05 FXDS, 99-05 FXDX, 87-94 FXR, FXLR, FXRSP, 88-10 XL1200/C/S, 88-10 XL883/C/HUGGER (39MM)FRSPS293880 .80kg/mm spring 109.95FRSPS293885 .85kg/mm spring 109.95FRSPS293890 .90kg/mm spring 109.9506-10 FXD, 10 FXDWG, 02-10 VRSCA/B (49MM)0405-0259 W/ .6-1.1 kg/mm progressive spring 109.9599 BUELL X1, 99-01 S3T THUNDERBOLTFRSP-S362785 .85 kg/mm spring 109.95FRSP-S362790 .90 kg/mm spring 109.95FRSP-S362795 .95 kg/mm spring 109.95

FORK SPRINGS•Accuracy and performance•Accurate rates within 2%•Chrome silicon, high stiffness-to-mass ratio, shot-peened, heat-treated and preset

•Choose from varying spring rates to suit your riding needs

PART # DESCRIPTION SUG. RETAIL97-02 BUELL M2 CYCLONEFRSP-S373285 .85 kg/mm spring $109.95FRSP-S373290 .90 kg/mm spring 109.95FRSP-S373295 .95 kg/mm spring 109.95FRSP-S373210 1.0 kg/mm spring 109.9596-98 BUELL S1 LIGHTNING, 95-96 S2 THUNDERBOLT, 00-01 S3 THUNDERBOLT AND 97-98 THUNDERBOLTFRSP-S353480 .80 kg/mm spring 109.95FRSP-S353485 .85 kg/mm spring 109.95FRSP-S353490 .90 kg/mm spring 109.95FRSP-S353495 .95 kg/mm spring 109.95

PART # DESCRIPTION SUG. RETAIL84-10 FLST, FXST, 93-05 FXDWG, 85-86 FXWG, 84-01 FLT, FLHT, FLTR, 94-10 FLHR, 06-10 FLHT, FLTR, FLHX (41MM FORKS)FLEKS3880 W/ .80 kg/mm spring $259.95FLEKS3885 W/ .85 kg/mm spring 259.95FLEKS3890 W/ .90 kg/mm spring 259.950416-0047 W/ .95 kg/mm spring 259.950416-0046 W/ 1.0 kg/mm spring 259.9502-05 FLT, FLHT, FLTR0416-00111 W/ .95 kg/mm spring 279.95

PART # DESCRIPTION SUG. RETAIL93-05 FXD, 05 FXDC, 93-05 FXDL, 94-98 FXDS, 87-94 FXR, FXLR, FXRSP, 88-10 XL (EXCEPT 1200S) (39MM FORKS)FLEKS3580 W/ .80 kg/mm spring $259.95FLEKS3585 W/ .85 kg/mm spring 259.95FLEKS3590 W/ .90 kg/mm spring 259.950416-0045 W/ .95 kg/mm spring 259.9502-10 VRSCA/B/D, 06-10 FXDL (49MM FORKS)0416-0013 W/ .6-1.1 kg/mm progressive spring 259.95

COMPLETE FRONT END SUSPENSION KITS•Race Tech complete front-end suspension kits improve comfort and performance of damping rod forks•More than just fork lowering kits, these come with Race Tech Gold Valve cartridge fork emulators and high-performance springs•Also include hardware to lower bike 1” or 2”

0416-0011 FLEKS3580

0416-0013

1 Includes Gold Valve assembly for cartridge leg and Gold Valve Emulator for damping leg.

0405-0070


RETAIL

DS-222040 For 84-87 FXRT; 84-87 FXR, FXRS; 85-86 FXRD; 85-86 FX, FXE, FXS, FXSB; 86-87 XR (35mm) $91.95

11-1525 For 02-10 VRSCA/B/D, 06-10 FXD, 08-10 FXCW/C 91.95DS-222057 For 87-93 FXRS-SP; 88-93 FXRT; 91-05 Dyna Glide

(not FXDWG, FXD, FXDX) (39mm) 91.95DS-2220481 For 84-10 FXST, FXSTD, FLST, FLSTF; 93-06 FXDWG; 84-01 FLT,

FLHT, FLTR; 06-10 FLHT, FLHX, FLTR; 94-10 FLHR (41mm) 91.95


RETAIL

0405-0064 For 04-10 XL $91.95DS-222056 For 87-94 FXLR; 88-94 FXR, FXRS; 88-03 XL (39mm)

(not 92-03 Hugger) 91.95DS-222045 For 95-05 FXD, 92-03 XL Hugger (39mm) 91.950405-0070 For 02-05 FLHT, FLTR (fairing models with cartridge fork) 91.951 For 02-05 touring models with cartridge fork, use PART #0405-0070.

DS-221549

PART # DESCRIPTION SUG. RETAIL

0405-0178 For 02-10 VRSCA/B/D (49mm) $159.95DS-221549 For 84-10 FLST/C, FXST/C, 00-07 FXSTD and

93-05 FXDWG (41mm) 129.95


0405-0176 For 84-01 FLT, FLHT, FLTR, 06-10 FLHT, FLHX, FLTR, 94-10 FLHR (41mm) $129.95

0405-0179 For 06-10 FXD (49mm) 159.950405-0177 For 91-92 FXD, 93-05 FXDL (39mm) 129.95

0405-0176


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

964


RETAIL10-1565 For 02-10 VRSCA/B/D (lowers 1”) $117.95PS-01561 For 84-01, 06-10 FLHT, FLT, FLHR, FLTR; 85-86 FXWG;

84-10 FXST, FLST; 93-05 FXDWG (41mm) 117.95PS-01560 For 87-94 FXLR; 88-94 FXR, FXRS; 87-94 FXR-SP/

CONV.; 88-92 FXRT; 91-92 FXDB/C; 93-99 FXDL (except FXDX); 94-00 FXDS-CONV; 88-10 XL (except 1200S) (39mm) 117.95

PS-01559 For 86-87 Sportster; 82-87 FXR, FXRS; 84-87 FXRT and 85-86 FX (35mm) 117.95

0416-0018 For 06-10 FXD 117.95

FORK LOWERING KIT•Lowering kit utilizes Progressive Suspension’s experience and knowledge to provide exact model applications

•Progressively wound for more comfort and control over a variety of road surfaces

•Lowers forks up to 2”•Kit comes complete with springs, spacers and installation instructions


PART # DESCRIPTION SUG. RETAIL0416-0034 For 88-10 XL $129.950416-0035 For 91-05 FXD (except FXDWG) 129.950416-0036 For 06-10 FXD, 08-10 FXCW/C 129.950416-0037 For 84-10 FXST/FLST, 84-10 FLHT/FLT

(non-cartridge models) 129.950416-0038 For 02-05 FLHT/FLTR (cartridge equipped

fork models) 84.95

DROP-IN FRONT FORK LOWERING SYSTEM•Transforms a time-consuming installation process into a quick and simple job

•Lowers front end of your bike up to 2” without disassembling the forks

•Entire procedure can be accomplished with basic tools


PART # DESCRIPTION SUG. RETAILDS-2214401 For 84-10 FXST, 93-05 FXDWG; 86-10 FLST;

84-86 FXWG; 94-10 FLHR; 84-01, 06-10 FLHT/FLTR, FLT (41mm tubes) $99.95

DS-221441 For 87-94 FXRS-SP, FXLR; 88-94 FXR, FXRS, FXRT; 91-05 FXD (except FXDX) ; 88-10 XL 1200 (39mm tubes) (except 1200S) 99.95

DS-221442 For 85-87 FXSB, FXR, FXRS; 84-86 FXRT, FXRD; 86-87 XLH 883, 1000, 1100 (35mm tubes) 99.95

1 Lowers FLT/FLHT 1”.

LOWBOY FORK LOWERING KITS•This is how you get the look most everybody wants•Lower the forks up to 2”•Come with two rebound springs and two 30.5mm o.d. progressively wound fork springs plus instructions

•Easy installation•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-221458 For 89-06 FXSTS models $149.953805-0075 Disassembly tool 34.95

FORK LOWERING KIT•The quickest and easiest way to lower front forks by 11/2”

•Comes with two chrome compression springs, spring spacers and bushings


0416-0034


RETAIL0414-0370 For 97-10 FLT/FLHT/FLHR/FLHX/FLTR models $339.95

MONOTUBE FORK CARTRIDGE KIT•Converts dual damper rod and damper rod/cartridge forks (02-05 models) to high-performance cartridge forks

•Contains a pair of high-performance, gas-charged mono-tube fork cartridges

•Improves resistance to front brake dive, front end stability, cornering and bottoming control

•Direct internal component replacement•No modification for forks required•Made in the U.S.A.

DS-221441

PS-01559


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

965

DS-222183

PART # FITMENTINCHES LOWERED

SUG. RETAIL

DS-222182 For 00-10 FXST 2.5” $54.95For 00-10 FLST 2.0”For 97-01 FLHT, 06-10 FLHT/FLTR, 97-10 FLHR 1.5”

DS-222183 For 84-99 FXST 2.5” 54.95For 86-99 FLST 2.0”

DS-222184 For 91-05 FXDL 2.75” 54.95For 94-05 FXDS 2.75”For 94-05 FXD 2.0”For 97-03 XL 2.0”

CUSTOM FORK DAMPERS FOR LOWERED APPLICATIONS•Simplify lowering front end of motorcycle

•Dampers are shortened and drilled for a factory quality ride

•Use stock fork springs•Sold in pairs•Made in the U.S.A.


RETAIL0416-0026 For 84-10 FXST, 93-05 FXDWG; 86-10 FLST; 85-86 FXWG;

94-10 FLHR; 84-01/06-10 FLHT, FLT w/ 41mm forks $99.950416-0027 For 87-94 FXRS-SP, FXLR; 88-94 FXR, FXRS, FXRT;

91-05 FXD (except FXDX); 88-03 XL 883/1200 (except 00-03 XL1200S) w/ 39mm forks 99.95

FRONT FORK LOWERING KITS•Everything you need to lower the front end of your motorcycle

•Kits include all necessary installation hardware and instructions

•PART #0416-0026 lowers front forks 11/4” – 2” (kit only lowers FLT/FLHT model front forks 1”)

•PART #0416-0027 lowers front forks 1” – 2”

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT/FLHT0405-0285 Tuneable for all weights and riding styles $369.95FOR 96-05 FXD0405-0284 Tuneable for all weights and riding styles 369.95FOR 06-10 FXD0405-0285 Tuneable for all weights and riding styles 369.95FOR 87-94 FXRS0405-0283 Tuneable for all weights and riding styles 369.950405-0284 Tuneable for sport riding 369.95FOR 84-99 FXST/FXSTC0405-0285 Tuneable for all weights and riding styles 369.95FOR 91-10 FXDWG/FXDL0405-0285 Tuneable for all weights and riding styles 369.95FOR 84-10 FLST/FLSTC0405-0285 Tuneable for all weights and riding styles 369.95FOR 00-10 FXST/FXSTD0405-0285 Tuneable for all weights and riding styles 369.95FOR 88-10 XLH 883,12000405-0283 Tuneable for all weights and riding styles 369.950405-0284 Tuneable for sport riding 369.95

DROP-IN FORK CARTRIDGES WITH DUAL-RATE FORK SPRINGS•Self-contained damper units are designed to be used in conjunction with the stock damper rods

•Simple installation: simply pull the fork caps and drop in the entire assembly

•Adjustable for anti-dive, rate-transition and spring preload

•Can be set up for stock ride height or lowered (except FXR models)•Rebuildable•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFEGV-S3802 For 84-10 FLST, FXST (41mm forks) $159.95FEGV-S3802 For 84-01, 06-10 FLT, FLHT, FLTR, FLHX,

84-01 FLT, FLHT, FLTR, 94-10 FLHR (41mm forks) 159.950450-0112 For 06-10 FXD, FXDF, FXDB, FXDL (49mm forks) 169.95FEGV-S3501 For 93-05 FXD, 94-98 FXDS (39mm forks) 169.950450-0112 For 06-10 FXDWG (49mm forks) 169.95FEGV-S3802 For 93-05 FXDWG, 85-86 FXWG (41mm forks) 159.95FEGV-S3501 For 87-94, 99 FXR, FXLR, FXRSP (39mm forks) 169.95FEGV-S3501 For 88-10 XL (except 97-03 XL 1200S)

(39mm forks) 169.950450-0112 For 02-10 VRSC V-Rod (except VRSCR

Street Rod) (49mm forks) 169.95FEGV-S3001 For all 35mm forks 159.95

GOLD VALVE CARTRIDGE FORK EMULATORS•Make damping rod forks perform like well-tuned cartridge forks

•Tunable valves sit on top of damping rods; held in place by the main springs

•Typical road race track tests show an improvement of 2 seconds per lap•Simple to install and tuneable for all conditions and rider preferences

GOLD VALVE™ FORK KITS•The ultimate front end should feel controlled and not dive excessively; firm with a plush ride•Gold Valve fork kits give that plush-yet-firm ride by improving the flow area in the piston, which transfers control of the damping to the valving shims

•Include “Fork Maintenance and Gold Valve Installation” video to facilitate installation

DS-222182 DS-222184

0416-0026

0405-0283

0416-0027

PART # DESCRIPTION SUG. RETAILFOR CARTRIDGE FORKSFMGV-S2043 For 99-05 FXDX, 99-05 FXDS, 97-03 XL 1200S $169.95FMGV-S2043 For 99 Buell X1, 97-98 and 00-01 M2 Cyclone, 01 S1 Lightning,

00-01 S3 Thunderbolt, 99-01 S3T Thunderbolt 169.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

966

FORK DAMPER RODS•Stock Sportster and FXR forks lack rebound damping; Progressive’s replacement damper rods combat the problem

•Combine them with Progressive Suspension fork springs for a dramatic improvement•Sold in pairs•Made in the U.S.A.


RETAILDS-222044 For 84-99 FXST, 85-86 FXWG,

93-99 FXDWG models; repl. OEM #45418-84 $23.95

DAMPER TUBE ASSEMBLIES•Damper tube assemblies meet or exceed OEM specifications

•Designed to fit many Showa front forks•Sold each; two required to rebuild or assemble a front end

FRONT FORK DAMPER TUBE MOUNTING KIT•Kit includes two socket-head bolts and two copper washers


PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST/C, 93-05 FXDWG, 86-10 FLST AND 84-10 FLHT MODELS (41MM)DS-222030 Fork tube bushings; repl. OEM #45940-84 (.588” wide) $8.95DS-222031 Lower fork leg bushings; repl. OEM #45866-84 (.778” wide) 8.95FOR 91-05 DYNA GLIDE (EXCEPT FXDWG), 87-94 FXR AND 88-10 XL MODELS (39MM)DS-222028 Fork tube bushings; repl. OEM #45461-87 (.588” wide) 8.95DS-222029 Lower fork leg bushings; repl. OEM #45465-87 (.778” wide) 8.95FOR 84-87 FXR AND 86-87 XL MODELS (35 MM)DS-222125 Fork tube bushings; repl. OEM #45413-84 (.588” wide) 8.95DS-222126 Lower fork leg bushings; repl. OEM #45416-84

(.588” wide) 8.95

FORK SLIDER BUSHINGS•Replace OEM bushings•Sold in pairs•Made in Japan

NOTE: Bushings and seals should be replaced whenever the front forks are disassembled.


RETAILDS-222052 All 39mm XL (except 92-03 Hugger) and 87-94 FXRT, FXRS-SP, FXRS-CON

(will not fit Dyna Glide); repl. OEM #45925-88 $122.95


RETAILDS-222186 For 91-02 FXDWG, 84-99

FXST, FXSTC, FXWG, and FLT; repl. OEM #45855-77 $5.95

PART # DESCRIPTION SUG. RETAILDS-222051 For 84-10 Showa front ends;

repl. OEM #45405-75A $5.95

41MM DAMPER SPRING•Sold each


RETAILDS-222773 For all models w/

Wide Glide Showa forks from 85-99; repl. OEM #45834-77 (ea.) $8.95

FORK LEG LOWER STOP•Precision machined for an exact fit

PART # DESCRIPTION SUG. RETAILFOR 99-01 BUELL S3T THUNDERBOLT (41MM)FMBI41201P Inner bushing (20mm wide) $24.95FMBO41202P Outer bushing (20mm wide) 22.95FOR 00-01 BUELL M2 CYCLONE (41MM)FMBI41201P Inner bushing (20mm wide) 24.95FMBO41152P Outer bushing (15mm wide) 22.95FOR 99 BUELL X1 (43MM)FMBI43201P Inner bushing (20mm wide) 19.95FMBO43152P Outer bushing (15mm wide) 22.95

SUPER SLICK FORK BUSHINGS•Revolutionary low-friction design ensures high-quality suspension performance

•Constructed of FEP and tin composite, these Teflon (PTFE) coated bushings have the lowest friction properties available

•Inner bushings mount on the inner (chrome) fork tube and have Teflon on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have Teflon on the inside of the bushing

•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-189814 For 84-07 Showa/Kayaba forks;

repl. OEM #45998-73 $8.95

FORK SLIDER BOTTOM CAP STUD WITH NUT•Package of two

DS-222030 DS-222031 DS-222028DS-222029

DS-222125

DS-222126


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

967

PART # DESCRIPTION SUG. RETAILDS-222785 Fork tube caps for 85 FX; 84-86 FXR, FXRS; E86 XL

(fine thread); repl. OEM #45993-73 (pr.) $19.95

CHROME FORK TUBE CAPS

PART # DESCRIPTION SUG. RETAIL0409-0012 For 80-10 FXWG, FXST/FLST and 93-05 FXDWG $99.95

SPIKED FORK CAPS•CNC-machined from billet aluminum•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0412-0061 For 5°/7° raked triple trees, gothic $94.95

41MM FORK TUBE COVERS•Chrome 6061 T-6 billet aluminum•Fit between the upper and lower triple trees on raked Accutronix trees

•Made in the U.S.A.; sold in pairs


RETAILDS-222821 For 84-10 FXST, 93-05 FXDWG and 85-86 FXWG models $99.95

CUSTOM BILLET FORK BOOTS•Exclusive slash-cut design gives you a new, bold look

•Made from 6061 T-6 billet aluminum and chrome-plated

•41mm boots have internal O-rings to keep water out

•Attach firmly with included setscrew•Sold in pairs•Made in the U.S.A.

BILLET FORK SLIDER COLLARS•Cover the stock dust covers•CNC-machined from billet aluminum and chrome-plated•Installation requires removal of fork legs•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST/C, 93-05 FXDWG AND 85-86 FXWGDS-222812 Ball-milled $66.95DS-222813 Smooth 66.95

CUSTOM BILLET FORK BOOTS•Chrome billet aluminum fork boots add a touch of class to the tops of your fork sliders

•Available in two styles to fit 41mm fork sliders

•Attach firmly with a setscrew•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL200 Fork guards $17.95

FORK GUARDS•Protect fork seals from road hazards including bugs, dirt, rocks, etc.

•Neoprene guards are stretchy and durable; fit nearly all motorcycle forks

•Machine-washable•Hook-and-loop fasteners for easy installation•Available in black only•Sold in pairs•Made in the U.S.A.


RETAILDS-219995 For 39mm forks on 88-94

FXR, 88-10 XL; 91-05 FXD; repl. OEM #46002-87 $14.95

0406-0017 For 49mm forks on 06-10 FXD/FXDWG, 02-10 VRSC models (billet machined) 39.95

FORK BOOT COVERS•Aluminum construction with chrome-plated finish

•Sold in pairs


RETAILDS-240341 For 84-10 FXST, 93-05 FXDWG

and 85-86 FXWG; repl. OEM #45420-80 $6.95

DS-240350 For 86-87 FX, XL (Showa); repl. OEM #45404-75 5.95

FORK BOOTS•Keep dirt and dust out of the fork seals to ensure long fork life

•Black molded rubber fork boots replace worn stock boots; sold in pairs

DS-222812

DS-222813

DS-240341

0412-0062 0412-0063

CHROME BILLET FORK TUBE NUT COVERS•Smooth design to match OEM stem nut cover



RETAILDS-222774 Upper fork tube plugs for all 84-99 Showa Wide Glide

forks (except 84 and later FLT, FLHT, FLHS and FL models w/ adjustable forks); repl. OEM #45838-77 $27.95

DS-222775 Slider tube caps for all 84-10 FXST/FLST, FXWG, 93-05 Dyna Wide Glide and 85-86 FXWG models; repl. OEM #45419-80 17.95

CHROME FORK TUBE PLUGS AND CAPS•Sold in pairs DS-222774

DS-222775

PART # DESCRIPTION SUG. RETAILFOR 41MM WIDE GLIDE FRONT ENDS0412-0062 Ball-milled $87.950412-0063 Smooth 87.95

DS-219995

PART # DESCRIPTION SUG. RETAILDS-222149 For 87-10 fork tube nuts (except 06-10 Dyna Glide) $49.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

968

TRACKER FRONT FORK BRACES•Designed to replace front fender•Practically eliminates front fork flex•Stamped RSD logo copper badge riveted to top•Chrome hardware included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0415-0003 49mm for 06-10 FXD $263.950415-0004 49mm for 06-08 FXDWG, 08-10 FXDF 263.95DS-222709 41mm FXSTD 263.95DS-222705 41mm Wide Glide (except FXSTD,

07-10 FXSTC) 242.952406-8001 39mm Wide Glide conversion kit

(97/8” center-to-center) 242.95DS-222706 39mm mid glide 242.95DS-222707 39mm narrow glide 242.95

CHROME BILLET ALUMINUM FORK TRUSSES•Manufactured from a solid piece of 6061 T-6 aluminum, then chrome-plated

•Designed with a compound arch for greater torsional stiffness, which means not only less deflection and twisting but more fender clearance

•Bolts to lower fork legs, which enables the use of dust covers, no need to disassemble the front fork


PART # DESCRIPTION SUG. RETAIL2406-8002 For FXWG, FXST, FXDWG and FXSTD models $171.95

41MM CHROME WIDE GLIDE TWEEK BAR•As in the good old days with extended front tubes, the need for a tweek bar is here again

•Vast improvement over the tweek bars used back in the 60s and 70s•Feature lightening holes with a compound arc for added strength and great looks

•Bolts directly to the fork tubes•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-222098 For all 84-10 FXST, FXWG and 93-05 FXDWG models

except FXSTD (not for use w/ shrouded forks) $156.950415-0005 For 00-07 FXSTD 169.95

FORK BRACES•High-quality, chrome-plated, die-cast aluminum fork braces

•Clamps to the lower fork leg below the dust cap

•Total adjustability prevents binding that may occur with one-piece fork braces

FOR ALL 88-05 FXR, FXD AND 88-10 XL MODELS WITH 39MM NARROW GLIDE SHOWA FORKS

PART # DESCRIPTION SUG. RETAILDS-222118 Satin $119.95DS-222119 Anodized black 124.95DS-222120 Chrome 134.95

CUSTOM BILLET 39MM FORK BRACES•Machined from 6061 T-6 billet aluminum

•Choose from natural satin, anodized black or chrome finish

•Extremely lightweight, only 14.5 oz.; excellent rigidity and strength

•Bolts to lower fork legs•Totally adjustable to compensate for any manufacturing inconsistencies in fork assembly

•Stainless steel hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0415-0002 For 41mm Wide Glide w/ horizontal

mounting holes on fork legs $225.95

CHROME-PLATED FORK BRACE•Quality hardened steel construction

•1” billet aluminum spacers•Fits 21” wheels•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-221906 For 00-10 FXST models $224.95DS-221907 For 86-99 FXST models 224.95DS-221908 For L88-03 XL models (w/ 39mm forks) 224.95DS-221909 For 91-05 FXD 224.95DS-221910 For 93-05 FXDWG models 249.95

STEERING DAMPER KITS•Seven-position hydraulic steering dampers•Fully adjustable; allows full-fork movement from stop-to-stop

•Dampen unwanted fork oscillations (speed wobble)•Include required mounting hardware and instructions for installation

DS-222118

DS-222119

DS-222120

0415-0013

0415-0003

DS-222709

2406-8001DS-222705

DS-222706

DS-222707

0415-0004

0415-0012

0415-0005

DS-222098DS-222098

DS-221906DS-221906

DS-221908DS-221908

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST/FLST, 93-05 FXDWG W/ 21” WHEELS (EXCEPT FXSTD, FXCW, FXCWC)0415-0012 Chrome $149.950415-0013 Black 129.95FOR 88-05 FXR/FXD, 88-10 XL W/ 19”/21” WHEELS0415-0015 Chrome 149.950415-0014 Black 129.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

969

DRAG SPECIALTIES SHOCK ABSORBERS•Shock bodies are steel construction with multi-stage velocity-sensitive hydraulic dampers•Feature progressive rate springs that provide a softer initial response, but resist bottoming better than stock springs

•Improved damping rates for a more controlled ride with no wallowing•Adjustable spring pre-load•Chrome-plated covers and springs for style•Custom lengths available for stock ride height or a lowered, custom look•Manufactured to Drag Specialties specifications by Progressive Suspension•Sold in pairs•Made in the U.S.A.

NOTE: Lowering the motorcycle will reduce ground and cornering clearance.

NOTE: When installing replacement shocks on 86-03 XL models, it may be necessary to modify or space the chain guard/belt guard to allow proper shock clearance.

NOTE: Heavy Duty Applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time.

FITS MODEL 11.0” 11.5” 12.0” 12.5” 13.0” SUG. RETAILFor 91-10 Dyna Glide (except 00-05 FXDX/FXDXT) 1310-0380 - 1310-0384 - - $224.95For 06-10 FLT/FLHT/FLHR/FLTR - 1310-0383 - 1310-0601 1310-0603 224.95For 84-05 FLT/FLHT/FLHR/FLTR - 1310-0382 - 1310-0386 1310-0389 224.95For 84-94 FXR 1310-0378 1310-0382 - 614-1250-002 614-1300-002 224.95For 04-10 XL 1310-0379 1310-0383 - 1310-0387 1310-0390 224.95For 86-03 XL 1310-0378 1310-0382 - 614-1250-002 614-1300-002 224.95For 88-03 XLH 883/1200 1310-0378 1310-0382 - 614-1250-002 614-1300-002 224.95

APPLICATION 11.0” 11.5” 12.0” 12.5” 13.0” SUG. RETAILFor 91-10 Dyna Glide (except 00-05 FXDX/FXDXT) 614-1101-001 - 614-1201-001 - - $224.95For 06-10 FLT/FLHT/FLHR/FLTR - 1310-0381 - 1310-0387 1310-0602 224.95For 84-05 FLT/FLHT/FLHR/FLTR - 614-1150-001 - 614-1250-002 614-1300-002 224.95For 84-94 FXR 1310-0227 614-1150-001 - 614-1250-001 614-1300-001 224.95For 04-10 XL 1310-0377 1310-0381 - 1310-0385 1310-0388 224.95For 86-03 XL 1310-0227 614-1150-001 - 614-1250-001 614-1300-001 224.95For 88-03 XLH 883/1200 1310-0227 614-1150-001 - 614-1250-001 614-1300-001 224.95 HEAVY DUTY

STANDARD

DESCRIPTION CHROME BLACK SUG. RETAILDYNA GLIDEFor 91-10 FXD 1310-0590 1310-0591 $199.95XLFor 88-03 XL 1310-0586 1310-0587 199.95For 04-10 XL 1310-0588 1310-0589 199.95

SLAMMER SHOCKS•Made famous by the Burly Slammer Suspension Kit but now available on their own

•Stubby 10.5” eye-to-eye measurement•Are preload adjustable to tune to rider weight•Available in black or chrome•Made in the U.S.A.

1310-05861310-0587

To use the 11” shocks on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. Then install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.

614-1101-001


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

970

APPLICATION COLOR 11.0” 11.5” 12.0” 12.5” 13.0” SUG. RETAILFLT/FLHT06-10 FLT/FLHT/FLHR/FLTR CHR - 1310-0498 1310-0500 1310-0562 1310-0564 $544.95

BLK - 1310-0499 1310-0501 1310-0561 1310-0563 494.9584-05 FLT/FLHT/FLHR/FLTR CHR - 1310-0282 1310-0290 1310-0532 1310-0534 544.95

BLK - 1310-0283 1310-0291 1310-0531 1310-0533 494.95FXD91-10 FXD (except 00-05 FXDX, FXDXT) CHR 1310-0288 - 1310-0542 1310-0544 - 544.95

BLK 1310-0289 - 1310-0541 1310-0543 - 494.95FXR87-94 FXR, 99-10 FXR CHR 1310-0536 1310-0282 1310-0290 1310-0526 1310-0528 544.95

BLK 1310-0535 1310-0283 1310-0291 1310-0525 1310-0527 494.95XL04-10 XL CHR 1310-0558 1310-0413 1310-0415 1310-0552 1310-0554 544.95

BLK 1310-0557 1310-0414 1310-0416 1310-0551 1310-0553 494.9586-03 XL CHR 1310-0536 1310-0282 1310-0290 1310-0526 1310-0528 544.95

BLK 1310-0535 1310-0283 1310-0291 1310-0525 1310-0527 494.95

APPLICATION COLOR 11.0” 11.5” 12.0” 12.5” 13.0” SUG. RETAILFLT/FLHT06-10 FLT/FLHT/FLHR/FLTR CHR - 1310-0496 1310-0566 1310-0568 1310-0570 $544.95

BLK - 1310-0497 1310-0565 1310-0567 1310-0569 494.9584-05 FLT/FLHT/FLHR/FLTR CHR - 1310-0280 1310-0546 1310-0526 1310-0528 544.95

BLK - 1310-0281 1310-0545 1310-0525 1310-0527 494.95FXD91-10 FXD (except 00-05 FXDX, FXDXT) CHR 1310-0286 - 1310-0538 1310-0540 - 544.95

BLK 1310-0287 - 1310-0537 1310-0539 - 494.95FXR91-94, 99-00 FXR CHR 1310-0278 1310-0280 1310-0546 1310-0284 1310-0530 544.95

BLK 1310-0279 1310-0281 1310-0545 1310-0285 1310-0529 494.95FX/FXWG 4-SPEED73-86 FX/FL CHR 1310-0292 - 1310-0293 - - 544.95XL04-10 XL CHR 1310-0409 1310-0411 1310-0560 1310-0417 1310-0556 544.95

BLK 1310-0410 1310-0412 1310-0559 1310-0418 1310-0555 494.9586-03 XL CHR 1310-0278 1310-0280 1310-0546 1310-0284 1310-0530 544.95

BLK 1310-0279 1310-0281 1310-0545 1310-0285 1310-0529 494.95V-ROD02-10 VRSC/A/AW/D/X CHR - - 1310-0548 1310-0550 - 544.95

BLK - - 1310-0547 1310-0549 - 494.95

430 SERIES SHOCKS•Get the best in class dampening performance with this high-pressure gas mono tube shock

•Gas and oil separated with a divider piston•Fade-free in any type of conditions•Features disk valves for quick and consistent damping•Threaded preload adjuster allows for fine tuning with a simple twist of the cap

•Can be mounted with the preload adjuster at the top or bottom•Includes a durable “Nitro-Steel” piston shaft•Available in a chrome or black finish•Made in the U.S.A.

NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.

NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering.

NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing.

NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of the catalog.

STANDARD 430 SERIES SHOCKS

HEAVY-DUTY 430 SERIES SHOCKS

Chrome/Polished

Black


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

971

APPLICATION COLOR 11.0” 11.5” 12.0” 12.5” 12.6” 13.0” 13.5” SUG. RETAIL

V-ROD

02-10 VRSCA/B/D/W CHR - - - PS412-4054C - PS412-4055C - $299.95

BLK - - - PS412-4054B - - - 299.95

FLT, FLHT

06-10 FLT, FLHT, FLHR, FLTR CHR - 1310-0480 1310-0482 1310-0484 - 1310-0486 - 299.95

BLK - 1310-0481 1310-0483 1310-0485 - 1310-0487 - 299.95

84-05 FLT, FLHT, FLHR, FLTR CHR - PS4011C PS412-4050C PS4124019C - - PS4021C 299.95

BLK - - PS4050B PS4124019B - PS4020B - 299.95

DYNA

91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/o cover CHR PS4045C1 - PS4044C - PS4048C - - 299.95

BLK DS-3100441 - DS-310068 - PS4048B - - 299.95

91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover CHR PS4047C1 - PS4046C - - - - 358.95

FXR

88-94 FXR models CHR PS4022C PS4011C PS412-4050C PS4001C - PS4002C PS4003C 299.95

BLK PS4022B - PS4050B PS4001B - PS4002B PS4003B 299.95

XL

04-10 XL CHR 1310-0395 1310-0399 1310-0403 1310-0407 - - - 299.95

BLK 1310-0396 1310-0400 1310-0404 1310-0408 - - - 299.95

86-03 XL CHR PS4022C PS4011C PS412-4050C PS4001C - PS4002C PS4003C 299.95

BLK PS4022B - PS4050B PS4001B - PS4002B PS4003B 299.95

1 Fender on FXDWG must be modified – see diagram.

APPLICATION COLOR 11.0” 11.5” 12.0” 12.5” 13.0” 13.5” 14.25” SUG. RETAIL

V-ROD

02-10 VRSCA/B/D/W CHR - - PS412-4051C - - - - $299.95

BLK - - PS412-4051B - - - - 299.95

FLT, FLHT

06-10 FLT, FLHT, FLHR, FLTR CHR - 1310-0472 1310-0474 1310-0476 1310-0478 - - 299.95

BLK - 1310-0473 1310-0475 1310-0477 1310-0479 - - 299.95

84-05 FLT, FLHT, FLHR, FLTR CHR - DS-310033 PS4049C - PS4002C PS4003C - 299.95

BLK - DS-310034 PS4049B - PS4002B PS4003B - 299.95

DYNA

91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/o cover CHR DS-3100611 - DS-310060 DS-310038 - - - 299.95

BLK DS-3100261 - DS-310053 - - - - 299.95

91-10 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover CHR DS-3100281 - DS-310036 - - - - 358.95

FXR

87-94 FXR models CHR DS-310093 DS-310033 - DS-222000 DS-222001 DS-222002 DS-310059 299.95

BLK DS-310092 DS-310034 - DS-222010 DS-222011 DS-222012 DS-310057 299.95

FX, FXWG 4-SPEED

85-86 FX, FXWG w/o cover CHR DS-222013 - DS-222004 - - - - 299.95

85-86 FX, FXWG w/ cover CHR - - DS-310089 - - - - 358.95

XL

04-10 XL CHR 1310-0393 1310-0397 1310-0401 1310-0405 - - - 299.95

BLK 1310-0394 1310-0398 1310-0402 1310-0406 - - - 299.95

86-03 XL CHR DS-310093 DS-310033 PS4049C DS-222000 DS-222001 DS-222002 DS-310059 299.95

BLK DS-310092 DS-310034 PS4049B DS-222010 DS-222011 DS-222012 DS-310057 299.95

1 Fender on FXDWG must be modified – see diagram.

412 SERIES SHOCKS•Manufactured from the finest materials available

•Designed specifically for Harley models•412 Series steel spring shocks are nitrogen gas-charged with multi-stage automatic valving and an adjustable spring preload; proven under extensive testing; easily installed; available in all black or with chromed springs and end caps (shock cartridge is not chrome)

•Available in standard shocks for the average single rider or heavy-duty shocks better fitted for the touring rider carrying passengers or a body weight of 225 lb. and up

•Shock absorbers carry a one-year limited warranty; shock springs have lifetime warranties•Optional shock lights available, see page 663•TUV approved•Made in the U.S.A.

NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.

NOTE: CHR denotes chrome shock part numbers; BLK denotes black shock part numbers.

NOTE: When installing shocks on 84-10 XL models, it may be necessary to modify or space the chain/belt guard to allow proper clearance.



NOTE: For OEM shock lengths, see Quick Reference Guide in the back of the catalog.

NOTE: Some or all shocks listed have TUV approval. Refer to most recent TUV certificate for current listing.

To use the 11” or 11.5” 412 shock on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.



Black Chrome With chrome covers


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

972

APPLICATION COVER STYLE 11.0” 11.5” 12.0” SUG. RETAILFLT, FLHT84-10 FLT/FLHT/FLHR/FLTR Baloney Cut - 1310-0210 1310-0216 $439.95

Double Cut - 1310-0220 1310-0226 439.95Chrome Flame w/ chrome springs - - 1310-0274 439.95Chrome Flame w/ black springs - - 1310-0275 439.95

FXD91-10 FXD (except 00-05 FXDX, FXDXT) Baloney Cut 1310-0215 - 1310-0460 439.95

Double Cut 1310-0225 - 1310-0461 439.95Chrome Flame w/ chrome springs 1310-0272 - 1310-0462 439.95Chrome Flame w/ black springs 1310-0273 - 1310-0463 439.95Vintage 1310-0297 - 1310-0464 439.95

XL04-10 XL Baloney Cut 1310-0465 1310-0429 1310-0433 439.95

Double Cut 1310-0466 1310-0428 1310-0432 439.95Chrome Flame w/ chrome springs 1310-0467 1310-0430 1310-0434 439.95Chrome Flame w/ black springs 1310-0468 1310-0431 1310-0435 439.95

91-03 XL Baloney Cut 1310-0451 1310-0210 1310-0216 439.95Double Cut 1310-0452 1310-0220 1310-0226 439.95Chrome Flame w/ chrome springs 1310-0453 1310-0266 - 439.95Chrome Flame w/ black springs 1310-0454 1310-0267 - 439.95

APPLICATION COVER STYLE 11.0” 11.5” 12.0” 12.5” SUG. RETAILFLT, FLHT84-10 FLT/FLHT/FLHR/FLTR Baloney Cut - 1310-0208 - - $439.95

Double Cut - 1310-0218 - - 439.95FXD91-10 FXD (except 95-05 FXDX, FXDXT) Baloney Cut 1310-0214 - 1310-0455 - 439.95

Double Cut 1310-0224 - 1310-0456 - 439.95Chrome Flame w/ chrome springs 1310-0270 - 1310-0457 - 439.95Chrome Flame w/ black springs 1310-0271 - 1310-0458 - 439.95Vintage 1310-0295 - 1310-0459 - 439.95

FX/FXWG 4-SPEED85-86 FX/FXWG Baloney Cut 1310-0212 - 1310-0211 - 439.95

Double Cut 1310-0222 - 1310-0221 - 439.95Chrome Flame w/ chrome springs 1310-0276 - 1310-0277 - 439.95Vintage 1310-0296 - 1310-0294 - 439.95

XL04-10 XL Baloney cut 1310-0421 1310-0425 - 1310-0437 439.95

Double Cut 1310-0420 1310-0424 - 1310-0436 439.95Chrome Flame w/ chrome springs 1310-0422 1310-0426 - 1310-0438 439.95Chrome Flame w/ black springs 1310-0423 1310-0427 - 1310-0439 439.95Vintage 1310-0419 - - - 439.95

91-03 XL Baloney Cut 1310-0207 1310-0208 - 1310-0209 439.95Double Cut 1310-0217 1310-0218 - 1310-0219 439.95Chrome Flame w/ chrome springs 1310-0262 1310-0264 - 1310-0268 439.95Chrome Flame w/ black springs 1310-0263 1310-0265 - 1310-0269 439.95Vintage 1310-0298 - - - 439.95

812 SERIES SHOCKS•Manufactured from the finest materials available

•812 Series steel spring shocks are nitrogen gas-charged with multi-stage automatic valving and an adjustable spring preload; proven under extensive testing; easily installed; available in chromed springs and end caps

•Available in standard shocks for the average single rider or heavy-duty shocks better fitted for the touring rider carrying passengers or a body weight of 225 lb. and up

•Styled covers can be turned in any direction to achieve a unique custom look

•Optional shock lights available, see page 663

•TUV approved•Made in the U.S.A.

NOTE: All shocks are measured center of eyelet to center of eyelet.

NOTE: When installing shocks on 86-10 XL models, it may be necessary to modify or space the chain/belt guard to allow proper clearance.


NOTE: A shock which is slightly shorter than stock may slightly alter the head angle and provide somewhat slower steering.


NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of catalog.



Baloney cutDouble cut

Chrome flame with chrome springs

Chrome flame with black springs

Vintage


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

973

440 IAS SERIES SHOCKS•High-pressure gas-charged for consistent damping performance•Patented Inertia Active System (IAS) damping for unsurpassed handling and comfort•Top mount threaded preload adjuster allows for fine tuning with a simple twist of the cap•Feature two independent rebound damping circuits•Available in chrome billet aluminum end caps with chrome springs or black anodized end caps with powder coated black springs

•Heavy duty applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time

•Inertia valve determines whether the soft (wheel) circuit or the firm (chassis) circuit is utilized to optimize both handling and comfort automatically

•All three damping circuits, compression, as well as soft and firm rebound are also velocity sensitive•TUV approved•Made in the U.S.A.

NOTE: CHR = Chrome covers/chrome springs

BLK = Black covers/black springs


NOTE: A shock which is slightly shorter than stock may slightly alter the head angle and provide somewhat slower steering.

NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing


APPLICATION COLOR 11.0” 11.5” 12.0” 12.5” 13.0” 13.5” SUG. RETAILV-ROD02-10 VRSCA/B/D/W CHR - - 1310-0259 - 1310-0260 - $645.95

BLK - - 440-4054B - - - 589.95FLT/FLHT06-10 FLT/FLHT/FLHR/FLTR CHR - 1310-0502 1310-0504 1310-0299 1310-0300 1310-0301 645.95

BLK - 1310-0503 1310-0505 440-4001B1 440-4002B - 589.9584-05 FLT/FLHT/FLHR/FLTR CHR - 1310-0303 1310-0314 1310-0299 1310-0300 1310-0301 645.95

BLK - 440-4006B 440-4049B 440-4001B 440-4002B - 589.95FXD91-10 FXD/FXDWG models CHR - 1310-03172, 3 1310-03102 1310-03112 - - 645.95

BLK - 440-4052B2, 3 - - - - 589.95FXR84-94 FXR/FXRS/FXRT/FXLR CHR 1310-0302 1310-0303 1310-0314 - 1310-0304 1310-0305 645.95

BLK 440-4005B 440-4006B 440-4049B - - - 589.95FX/FXWG 4-SPEED85-86 FX/FXWG CHR - 1310-03182 1310-0258 - - - 645.95XL04-10 XL CHR 1310-0440 1310-0444 - - - - 645.95

BLK 1310-0441 1310-0445 - - - - 589.9586-03 XL CHR 1310-0302 1310-0303 1310-0314 - 1310-0304 1310-0305 645.95

BLK 440-4005B 440-4006B 440-4049B - - - 589.951 SUG. RETAIL $590.95.2 00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.3 Fender on FXDWG must be modified – see diagram above.

APPLICATION COLOR 11.0” 11.5” 12.0” 12.5” 13.0” 13.5” SUG. RETAILV-ROD02-10 VRSCA/B/D/W CHR - - - - 1310-0261 - $645.95FLT/FLHT06-10 FLT/FLHT/FLHR/FLTR CHR - 1310-0506 1310-0508 1310-0307 1310-0308 1310-0257 645.95

BLK - 1310-0507 1310-0509 440-4019B 440-4020B 440-4021B 589.9584-05 FLT/FLHT/FLHR/FLTR CHR - 1310-0306 1310-0315 1310-0307 1310-0308 1310-0257 645.95

BLK - 440-4011B 440-4050B 440-4019B 440-4020B 440-4021B 589.95FXD91-09 FXD/FXDWG models CHR - 1310-03181, 2 1310-02581 1310-03131 1310-03161 1310-03121 645.95

BLK - 440-4053B1, 2 440-4044B1 440-4048B1 - - 589.95FXR84-94 FXR/FXRS/FXRT/FXLR CHR 1310-0309 1310-0306 1310-0315 - - - 645.95

BLK 440-4022B 440-4011B 440-4050B - - - 589.95XL04-10 XL CHR 1310-0442 1310-0446 - - - - 645.95

BLK 1310-0443 1310-0447 - - - - 589.9586-03 XL CHR 1310-0309 1310-0306 1310-0315 - - - 645.95

BLK 440-4022B 440-4011B 440-4050B - - - 589.951 00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.2 Fender on FXDWG must be modified – see diagram above.



Black Chrome

To use the 11” or 11.5” 412 shock on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

974

PART # DESCRIPTION SUG. RETAIL1310-0571 For 84-10 FLT/FLHT/FLHR/FLTR models $699.95

940 ULTRA TOURING SHOCKS•Designed to provide a comfortable ride at 1” lowered stance•Built around Progressive Suspensions IAS series technology which separates wheel movement from chassis movement•Utilizes all the suspension travel provided by these 13” eye-to-eye units•Unique Ultra Touring spring combination delivers a lower ride height while riding and while on the side-stand•Adjust spring pre-load by hand with threaded adjusters (does not require special tools)•High-pressure gas charged for consistent performance•Made in the U.S.A.

418 SERIES SHOCKS•Aluminum body twin shocks•Five-position, externally adjustable rebound damping range allows you to dial in the ride you want

•Four-position, easily adjusted spring preload cam lets you adjust for different load and ride characteristics

•Gas charged for fade-free operation•Available in standard shocks for the average single rider or heavy-duty shocks better fitted for the touring rider carrying passengers or a body weight of 225 lb. and up

•Velocity-sensitive, multistage internal damping gives a consistent ride and handling over a variety of road surfaces

•The body is machined from aircraft-quality aluminum, clear anodized for an attractive and durable finish

•Double-walled construction (steel inner wall) for excellent durability

•Chromoly 4130 steel shaft, hard-chromed and precision-ground for strength and durability•Complete shock assemblies include chrome or black springs•Sold in pairs•TUV approved•Made in the U.S.A.





APPLICATION SPRING COLOR 11.5” 12.0” 12.5” 13.0” SUG. RETAILV-ROD02-10 VRSCA/B/D CHR - - PS4821C - $598.95FLT/FLHT84-05 FLT/FLHT/FLHR/FLTR CHR PS4811C PS4814C - - 598.95

BLK PS4811B PS4814B - - 598.95DYNA GLIDE91-10 FXD, FXDWG CHR PS4845C1, 2 PS4844C2 - - 598.95

BLK - PS4844B2 - - 598.95FXR, XL84-94 FXR, 86-10 XL CHR PS4811C PS4814C - PS4816C 598.95

BLK PS4811B PS4814B - PS4816B 598.951 Fender on FXDWG must be modified – see diagram above.2 00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.

APPLICATION SPRING COLOR 11.5” 12.0” 12.5” 13.0” 13.5” SUG. RETAILFLT/FLHT06-10 FLT/FLHT/FLHR/FLTR CHR 1310-0488 1310-0490 - - - $598.95

BLK 1310-0489 1310-0491 - - - 598.9584-05 FLT/FLHT/FLHR/FLTR CHR DS-222017 PS4812C - PS4816C - 598.95

BLK - PS4812B - PS4816B - 598.95DYNA GLIDE91-10 FXD/FXDWG CHR DS-2220201, 2 PS4836C2 DS-2220212 - - 598.95

BLK - PS4836B2 - - - 598.95FX/FXWG 4-SPEED85-86 FX/FXWG CHR PS4839C PS4813C - - - 598.95FXR, XL84-94 FXR, 86-10 XL CHR DS-222017 PS4812C DS-222018 PS4815C DS-222019 598.95

BLK - PS4812B - - - 598.951 Fender on FXDWG must be modified – see diagram above.2 00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.



To use the 11” or 11.5” 440, 418 shock on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.

BlackChrome


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

975

STREET TRACKER, STEEL TRACKER AND BLACK TRACKER SHOCK ABSORBERS•Feature hard-chrome high-tensile 1/2” steel shafts and billet aluminum components with computer-calibrated check ball, spring and orifice damping system

•Chromed-steel hydraulic tube with 13/8” damping piston and billet aluminum end caps•Select units feature ARS (adjustable-rate suspension), which allows the rider to increase or decrease the load-carrying capacity of the shocks up to 50% without changing the pre-load of the springs

•Steel Tracker shocks are available with two load-carrying capacities: 400-lb. and 500-lb. rider and passenger total weight•Available with chrome or back springs•Made in the U.S.A.

Street Tracker

Street TrackerSteel Tracker

PART # DESCRIPTION SUG. RETAILFOR 94-10 FLT/FLHTDS-310067 12” L dual-rate w/ ARS (400 lb. total weight) $565.95DS-310076 12” L dual-rate w/ ARS (500 lb. total weight) 565.95

PART # DESCRIPTION SUG. RETAILFOR 94-10 FLT/FLHT (CONT)DS-310095 13” L dual-rate w/ ARS (400 lb. total weight) $565.95DS-310037 13” L dual-rate w/ ARS (500 lb. total weight) 565.95

STREET TRACKER (WITH CHROME SPRINGS)PART # DESCRIPTION SUG. RETAILFOR 02-10 VRSCA/B/D1310-0012 12” L dual-rate (1.6” lower than stock) $519.951310-0011 13” L (stock length) dual-rate 565.95FOR 91-10 DYNADS-310000 11.6” L single-rate 519.951310-0075 12.6” L (stock length) dual-rate w/ ARS 699.95DS-310002 12.6” L (stock length) single-rate 519.95FOR 94-05 FXD-CONV.DS-310021 13” L (stock length) dual-rate 565.95FOR 87-94 FXRDS-310078 12” L single-rate 519.95DS-310077 13” L (stock length) single-rate 519.95FOR 04-10 883/1200 XLH1310-0078 11.00” L single-rate (100-160 lb. rider) 519.951310-0077 11.75” L single-rate (175-225 lb. rider) 519.951310-0076 13.25” L (stock length) dual-rate

(175-225 lb. rider) 565.95FOR 88-03 XLDS-310023 12.5” L dual-rate; chrome spring 565.95

Black Tracker

BLACK TRACKER (WITH BLACK SPRINGS)PART # DESCRIPTION SUG. RETAILFOR 02-10 VRSCA/B/D1310-0574 12” L dual-rate (1.6” lower than stock) $464.951310-0573 13” L (stock length) dual-rate 519.95FOR 91-10 DYNA1310-0575 11.6” L single-rate 464.951310-0576 12.6” L (stock length) single-rate 464.95FOR 94-05 FXD-CONV.1310-0577 13” L (stock length) dual-rate 519.95FOR 87-94 FXR1310-0585 12” L single-rate 464.951310-0584 13” L (stock length) single-rate 464.95FOR 04-10 883/1200 XLH1310-0583 11.00” L single-rate (100-160 lb. rider) 464.951310-0582 11.75” L single-rate (175-225 lb. rider) 464.951310-0581 13.25” L (stock length) dual-rate (175-225 lb. rider) 519.95FOR 88-03 XL1310-0580 11.75” L single-rate; black 464.951310-0579 12.5” L dual-rate 519.951310-0578 13.75” L (stock length) dual-rate 519.95

STEEL TRACKER (WITH BLACK SPRINGS)

PART # DESCRIPTION SUG. RETAIL1310-0205 00-10 FXST/FLST, 08-10 FXCW $499.951310-0204 89-99 FXST/FLST 599.95

422 SERIES SHOCKS•Fully adjustable for ride height and spring preload•Makes tuning the bike’s suspension for the rider and his or her riding style easy

•Shocks feature a show chrome cover•Pair of progressive-rate coil springs and purpose-designed monotube dampers provide superior suspension performance

•Dampers feature a nitrogen charge that eliminates internal oil cavitation and helps create a consistent ride while resisting heat-induced fade

•Shocks can be adjusted up to 2” lower than stock•Sold in pairs•Made in the U.S.A.

1310-0204


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

976

DRAG SPECIALTIES ADJUSTABLE SHOCKS FOR FXST/FLST•Shock length can be adjusted to be the same as stock, or up to 2” lower to achieve just the right look or seat height•Fully adjustable spring pre-load•Improved multi-stage, velocity-sensitive internal valving with hydraulic anti-bottoming for a comfortable, jolt-free ride•Freon-gas cell used for fade-free shock operation•Double-walled construction for extra durability•Available with a chrome finish for a custom look•Manufactured to Drag Specialties specifications by Progressive Suspension


PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, FLSTDS-310084 Standard, chrome $699.951310-0081 Heavy-duty, chrome 699.95DS-310085 Standard, black 595.951310-0082 Heavy-duty, black 595.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLSTDS-310079 Standard, chrome $699.951310-0079 Heavy-duty, chrome 699.95DS-310080 Standard, black 595.951310-0080 Heavy-duty, black 595.95

ADJUSTABLE SHOCKS•Available in chrome/polished aluminum finish or black wrinkle/black anodized finish

•Feature a large 113/16” diameter damping piston•Adjustable, which allows lowering the bike up to 13/4”

•Heavy-duty shocks available for riders 250+ lb.•Rebuildable; made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR ALL 94-02 BUELL MODELS (175-225-LB. RIDER)DS-310154 16.5” L w/ adjustable pre-load $699.95DS-310153 16.5” L w/ adjustable pre-load, rebound damping and compression damping 905.95DS-310157 14.8” L w/ adjustable pre-load 699.95DS-310156 14.8” L w/ adjustable pre-load, rebound damping and compression damping 905.95

ADJUSTABLE SHOCK ABSORBERS•High-performance shock will improve the handling of your Buell•Feature chrome body with remote reservoir and single-rate spring•Measure the existing shock from mounting eye to mounting eye to obtain the correct length replacement shock


1310-0194 1310-0195

DS-310080

DS-310154

DS-310079

PART # DESCRIPTION SUG. RETAIL1310-0194 For 00-10 FXST/FLST, 08-10 FXCW/C models $465.951310-0195 For 89-99 FXST/FLST models 565.951310-0229 For 84-88 FXST/FLST models 565.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

977

AIR LOGIC LEVELING SUSPENSION KIT•Included electronic sensor automatically controls the air pressure in the Airide springs to achieve proper ride height depending on the weight of the rider/riders and cargo, eliminating over or under inflation of air bags due to operator error, and the distraction of adjusting a manual switch while riding

•Features Firestone Airide springs for proper expansion and strength•Bilstein gas shocks specifically valved for the FLT models•On-board air compressor included•CNC-machined aluminum shock mount and bag mount•Spherical bearings in top shock mounts•All necessary hardware, air lines and mounting brackets included•Made in the U.S.A.

AIR OVER GAS PERFORMANCE SHOCK KITS•High-quality air-ride system specifically designed for H-D Touring models•Chrome Bilstein shocks custom valved with top mounted heavy-duty spherical bearings•Chromed CNC-machined billet aluminum top shock cover adds a custom finished look•Shocks are Firestone factory wrapped with an air ride purpose-built Firestone air bag•Air bags are specifically developed for air ride suspensions taking into consideration the use of proper expansion and strength characteristics•Compressor kit mounts out of sight with custom bracket and easy plug-n-play wiring harness•PART #1310-0523 includes two Bilstein shocks with Firestone air bags designed for use with existing OEM airlines and complete installation instructions

•PART #1310-0524 includes two Bilstein shocks with Firestone air bags, Alloy Arts air compressor kit (PART #1304-0294), custom wire harness with micro toggle switch, pressure gauge, all hardware/brackets, airlines needed and complete installation instructions

•PART #1304-0294 is just the manual-adjust compressor kit only; includes a high-quality air compressor, all mounting brackets and hardware, as well as complete wiring harness, micro toggle switch, pressure gauge and complete instructions


PART # DESCRIPTION SUG. RETAILFOR 86-10 FLT, FLHT, FLHR, FLHX, FLTR MODELS1310-0523 Performance shock kit w/o compressor $799.951310-0524 Performance shock kit w/ compressor 1,499.951304-0294 Compressor kit only 497.95

PART # DESCRIPTION SUG. RETAIL1310-0376 For 86-08 FLT, FLHT, FLHR and FLTR $1,778.95

1310-0523

1310-0524


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

AIRTAIL SHOCKS AND COMPRESSOR KIT•The Airtail system uses one shock similar to the current FXST/FLST shocks while the other uses dual air chambers•One chamber is for bottoming control – regardless of passenger or solo rider this raises bike to keep from bottoming when loaded•Second chamber is filled to lower the bike to desired height; with first chamber still filled there are no worries about bottoming-out•Shocks come standard with a manual fill system; optional on-board air compressor gives you maximum adjustability and on-the-fly suspension control

•Combine this with the on-board compressor and you can adjust every aspect of your shocks with the touch of a button•Shock absorbers sold in pairs•Made in the U.S.A.

NOTE: Not for use on FXCW and FXCWC models.

NOTE: It is not recommended that bike be lowered more than 2”.

978

PART # DESCRIPTION SUG. RETAIL1310-0448 84-10 FLT/FLHT Air Dragger shocks $499.951304-0211 84-96 FLT/FLHT Air line 37.951304-0222 Optional compressor 459.95

AIR DRAGGER AIR SHOCKS•Adjustable ride height air shocks•Air adjustable shock length can lower the bike up to 2”•Designed to be easily connected to the stock air lines found on most touring models

•Optional air line kit available for simple installation on models without OEM air shocks

•Integrated air and coil shock•Multi-stage velocity sensitive damping•Connection kit required for 84-96 FLT/FLHT models, sold separately•Optional, easy to install compressor sold separately•Made in the U.S.A.

NOTE: Some or all shocks listed have TUV approval. Refer to most recent TUV certificate for current listing.

PART # DESCRIPTION SUG. RETAILSHOCK ABSORBERS FOR FXST/FLST722-1002 00-10 FXST/FLSTN $822.95722-1001 89-99 FXST/FLST 822.95COMPRESSOR KIT (INCLUDES ON-BOARD COMPRESSOR AND MANUAL CONTROL SWITCH)1304-0214 07-10 FXST/FLSTN 751.9530-5101 00-06 FXST/FLST 751.9530-5100 89-99 FXST/FLST 751.95

1304-0214

1310-04481304-0222

722-1002

AIR TRACKER SHOCKS•150-450 lb. adjustment range for rider and load allows for dialing in of riding comfort and performance

•High-pressure, gas-charged, 7075 T-6 aluminum shock delivers superior ride quality•Corrosion-resistant, stainless steel pressure cylinder takes the place of springs and adds a smooth, uncluttered look

•Designed for easy fill-up from garage or gas station air; units typically require only 50 to 90 psi


PART # DESCRIPTION SUG. RETAILFOR 02-06 VRSC, 07-10 VRSCD1310-0592 12.00” L $499.951310-0595 12.50” L 499.951310-0598 13.00” L 499.95FOR 84-10 FLT, FLHT, FLHR1310-0594 12.00” L 499.951310-0597 12.50” L 499.951310-0600 13.00” L 499.95

PART # DESCRIPTION SUG. RETAILFOR 91-10 DYNA1310-0592 12.00” L $499.951310-0595 12.50” L 499.951310-0598 13.00” L 499.95FOR 88-94 FXR1310-0594 12.00” L 499.951310-0597 12.50” L 499.951310-0600 13.00” L 499.95

PART # DESCRIPTION SUG. RETAILFOR 91-10 XL1310-0594 12.00” L $499.951310-0597 12.50” L 499.951310-0600 13.00” L 499.95

1310-0592


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

979

FL108 AIR SUSPENSION•Designed for ride quality; no bottoming-out under any load condition

•Exclusive Gates™ Kevlar® air spring technology

•Compressor mounts between frame rails•Deflective disc dampening offers a smooth ride and eliminates annoying pogo•Spherical bearings in shocks eliminate shock binding•Suspension system installs in stock location; no modifications necessary•Color-coded plug-and-play wiring for quick and easy installation•System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability•Adjustable from stock height (13”) down 23/4”•Optional chrome handlebar mounted switch available separately (PART #0616-0039)•Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately•Made in the U.S.A.

NOTE: Not recommended for FLHX, FLHRS models.

PART # DESCRIPTION SUG. RETAILFOR 08-10 FLHT, FLHR, FLHX, FLTR LO-PRO EQUIPPED MODELS (EXCEPT FLHRSE)1311-0095 Black $1,599.951311-0096 Chrome 1,599.95

FL708 AIR SUSPENSION•Designed for ride quality; no bottoming-out under any load condition

•Exclusive Gates™ Kevlar® air spring technology•Compressor mounts between frame rails•Deflective disc dampening offers a smooth ride and eliminates annoying pogo

•Spherical bearings in shocks eliminate shock binding•Suspension system installs in stock location; no modifications necessary•Color-coded plug-and-play wiring for quick and easy installation•System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability

•Adjustable from stock height (13”) down 13/4”•Optional chrome handlebar mounted switch available separately (PART #0616-0039)

•Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately


NOTE: Not recommended for FLHX, FLHRS models.PART # DESCRIPTION SUG. RETAILFOR 04-10 XL MODELS (XL1 SERIES)1311-0091 Black $1,599.951311-0092 Chrome 1,599.95FOR 86-03 XL MODELS (XL786 SERIES)1311-0097 Black 1,599.951311-0098 Chrome 1,599.95

XL1/XL786 AIR SUSPENSION•Exclusive Kevlar® air spring technology•Best ride quality; no bottoming-out under any weight or road condition•Deflective disc dampening offers a smooth ride and eliminates annoying pogo

•CNC-machined from 6061 T-6 and 2011 aluminum•Suspension system installs in stock location; no modifications necessary•Downward adjustable 21/2” from 12”•Color-coded plug-and-play wiring for quick and easy installation•Systems include rider-friendly black handlebar switch for easy “on the go” adjustability, on-board air compressor, solenoid valve and necessary hardware

•Performance and quality proven under extensive testing since 1998•Optional chrome handlebar mount switch assembly available separately (PART #0616-0039)


PART # DESCRIPTION SUG. RETAILFOR 08-10 FLHT, FLHR, FLTR1311-0093 Black $1,599.951311-0094 Chrome 1,599.95

1311-0093

1311-0094

1311-0095

1311-0096

1311-0091

1311-0092


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

980

PART # DESCRIPTION SUG. RETAILFOR 99-07 FLT, FLHT, FLHR, FLTR (L1 CT SERIES)2404-1001 Chrome $1,599.951311-0070 Black 1,599.95FOR 85-98 FLT, FLHT, FLHR, FLTR (L1 CE SERIES)2404-1000 Chrome 1,599.95

PART # DESCRIPTION SUG. RETAILFOR 99-10 FXD MODELS (D1 SERIES)7807-0027 Chrome $1,599.951311-0069 Black 1,599.95FOR 02-10 VRSCA/B/D V-ROD MODELS (V1 SERIES)7807-0026 Chrome 1,599.951311-0071 Black 1,599.95

L1/D1/V1 AIR SUSPENSION•Designed for ride quality; no bottoming-out under any load condition•Exclusive Gates™ Kevlar® air spring technology•Compressor mounts between frame rails•Deflective disc dampening offers a smooth ride and eliminates annoying pogo•Spherical bearings in shocks eliminate shock binding•Suspension system installs in stock location; no modifications necessary•Color-coded plug-and-play wiring for quick and easy installation•System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability•L1 and D1 adjust from stock height (13”) down 31/4”; V1 adjusts from stock height (13”) down 21/2”•Optional chrome handlebar mounted switch available separately (PART #0616-0039)•Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately for L1•Made in the U.S.A.

NOTE: Not recommended for FLHX, FLHRS models.

L7 AIR SUSPENSION•Replaces the OEM accessory Low Touring shocks

•Works great in conjunction with the OEM accessory front end lowering kits

•Exclusive Kevlar® air spring technology•Best ride quality; no bottoming-out under any weight or road condition•Deflective disc dampening offers a smooth ride and eliminates annoying pogo•CNC-machined from 6061 T-6 and 2011 aluminum•Suspension system installs in stock location; no modifications necessary•Systems include rider-friendly black handlebar switch for easy “on the go” adjustability, on-board air compressor, solenoid valve and necessary hardware

•Measures 9.5” compressed, 12” extended•Color-coded plug-and-play wiring for quick and easy installation •Optional chrome handlebar mount switch assembly available separately (PART #0616-0039)

•Optional fairing mounted gauge and bezel for FLHT and FLTR models also available separately; see below


NOTE: Not recommended for FLHRS, FLHX models.

PART # DESCRIPTION SUG. RETAIL2212-0179 W/ black face $135.952212-0289 W/ white face 134.95

FAIRING MOUNTED GAUGES•Made from 6061 billet aluminum•Features a black or white face with Legend logo•Push-to-connect fitting•0-300 psi full sweep air pressure gauge•Fits into accessory gauge port on FLHT fairings; replaces air temperature gauge on FLTR fairings

2212-0289

1311-0075

1311-0076

2404-1001

2212-0179

1311-0070

PART # DESCRIPTION SUG. RETAILFOR 86-07 FLT, FLHT, FLHR, FLHX, FLTR LO-PRO EQUIPPED MODELS (EXCEPT FLHRSE)1311-0075 Black $1,599.951311-0076 Chrome 1,599.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

981

LTR1 HD-B AIR SUSPENSION•Designed for ride quality; no bottoming-out under any load condition•Exclusive Gates™ Kevlar® air spring technology•Spherical bearings in shocks eliminate shock binding•Deflective disc dampening offers a smooth ride and eliminates annoying pogo•Suspension system installs in stock location; no modifications necessary•Color-coded plug-and-play wiring for quick and easy installation•System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability•Optional fairing mounted gauges (PART #s 2212-0179 and 2212-0289) also available separately•Made in the U.S.A.


RETAILFOR 00-09 FXST/FLST (L2)1311-0063 Machined $1,170.951311-0064 Black 1,199.951311-0065 Chrome 1,285.95


RETAILFOR 89-99 FXST/FLST (L8)1311-0066 Machined $1,170.951311-0067 Black 1,199.951311-0068 Chrome 1,285.95

L2/L8 AIR SUSPENSION•Designed for ride quality; no bottoming-out under any load condition•Exclusive Gates™ Kevlar® air spring technology•Deflective disc dampening offers a smooth ride and eliminates annoying pogo

•Suspension system installs in stock location; no modifications necessary•Color-coded plug-and-play wiring for quick and easy installation•System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability

•Adjustable from stock height down 3”•System includes universal two way micro toggle switch•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL

FOR 00-10 FXST/FLST (L3)1311-0046 Chrome $1,799.951311-0045 Black 1,599.95FOR 89-99 FXST/FLST (L9)1311-0048 Chrome 1,799.951311-0047 Black 1,599.95

L3/L9 COMPACT-STYLE AIR SUSPENSION•More compact than the L2/L8 models•Designed for ride quality; no bottoming-out under any load condition

•Exclusive Gates™ Kevlar® air spring technology•Deflective disc dampening offers a smooth ride and eliminates annoying pogo

•Suspension system installs in stock location; no modifications necessary•Color-coded plug-and-play wiring for quick and easy installation•System includes rider-friendly black handlebar mounted control for easy “on-the-go” adjustability

•Adjustable from stock height down 23/4”•Optional chrome handlebar mounted switch available separately (PART #0616-0039)


PART # DESCRIPTION SUG. RETAIL0616-0039 Switch assembly $161.95

CHROME HANDLEBAR MOUNT SWITCH ASSEMBLY•Optional 1” handlebar switch assembly updates the black switch assembly that comes with the shocks•Works with all Legend suspension systems except the L2 and L8 Softail systems•Made in the U.S.A.

1311-0047

1311-0064

1311-0063

1311-0068

PART # DESCRIPTION SUG. RETAIL1311-0077 For 99-07 Lehman Touring Trikes $1,599.95

1311-0046


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

AIRTAIL™ I.A.S. SHOCKS AND COMPRESSOR KIT•Integrated air and coil shock absorber•Uses a linear rate coil combined with dual-chamber air shocks for a smooth ride and ultimate suspension control•Inertia Active System (I.A.S.) with Inertia Valve technology separates wheel movement from chassis movement•One air chamber for bottoming control and adjusting suspension for the bike’s load•The second air chamber adjusts ride height•Shocks come standard with a manual fill system for use with a hand pump PART #GP-0-100 (sold separately)

•Optional on-board air compressor kit for Dressers gives you maximum adjustability and on-the-fly suspension control

•Compressor kit fits 84-07 models only, sold separately•Compressor kit is now compatible with models equipped with cruise control•Shock absorbers sold in pairs•Made in the U.S.A.

982

PART # DESCRIPTION SUG. RETAIL84-10 FLT/FLHT/FLHR/FLTR1311-0060 Airtail shocks $999.9584-07 FLT/FLHT/FLHR/FLTR MODELS1304-0084 Airtail compressor kit 734.95HAND PUMP FOR MANUAL FILLGP-0-100 0-100 PSI hand pump 49.95

PART # DESCRIPTION SUG. RETAIL1311-0061 91-10 Dyna $1,318.95GP-0-100 0-100 PSI hand pump 49.95

AIRTAIL™ I.A.S. SHOCKS•Integrated air and coil shock absorber•Uses a linear rate coil combined with dual-chamber air shocks for a smooth ride and ultimate suspension control

•Inertia Active System (I.A.S.) with Inertia Valve technology separates wheel movement from chassis movement

•One air chamber for bottoming control and adjusting suspension for the bike’s load

•The second air chamber adjusts ride height•Shocks come standard with a manual fill system for use with a hand pump PART #GP-0-100 (sold separately)

•Shock absorbers sold in pairs•Made in the U.S.A.

Shown fully lowered

1311-0060

1304-0084

GP-0-100

Shown fully raised

Shown fully raised

GP-0-100

FULLY-ADJUSTABLE REAR AIR SHOCKS•The latest advance in rear air shocks from Works Performance•Systems come complete with air-spring and damper unit with internal spring, compressor pump, stainless-steel-sheathed hoses, wiring, fittings, switches and relays

•Fully adjustable over a range of up to 500 lb., down to the lightest rider•Air feature allows the rider to run the shocks at full length and travel while riding, yet lower the bike for cruising or when parked•Also designed to “run flat” in an emergency, which means that should an air line failure occur, the bike can still be ridden at a reduced speed, plus the system deflates slowly to allow the rider time to safely react

•Black housing with polished billet compressor brackets and switch mount•Adjusts to lower bike 13/4”•Sold in pairs•Made in the U.S.A.

1311-0054

Shown fully lowered

1311-0061

PART # DESCRIPTION SUG. RETAIL1311-0054 For 00-10 FXST, FLST $1,499.951311-0053 For 89-99 FXST, FLST $1,499.95

1311-0053


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

983

APPLICATION LENGTH PART # SUG. RETAILFor 84-10 FLT, FLHT, FLHS, FLHR, FLTR 12.5” DS-222005 $399.95

13” DS-2220061 399.95For 84-86 FXR, 86-10 XL models 12.5” DS-222005 399.95

13.5” DS-222007 399.951 02-05 FLHR recommended shock is slightly longer than stock. This may

alter the head angle slightly and provide somewhat quicker steering.

416 SERIES AIR SHOCKS•Manufactured from the finest materials available•Designed specifically for Harley models•416 series air shocks have air adjustability to allow fine tuning for safety and heavy loads, plus multi-stage automatic valving adjusts for all conditions; brushed aluminum with clear anodized finish


PART # DESCRIPTION SUG. RETAILDS-310063 For 84-10 XL $277.95

413 SERIES 15” SHOCKS•Progressive puts its expertise to work for high-performance applications

•Longer than stock for increased travel and ground clearance

•Freon-cell gas system for fade resistance and superior damping characteristics

•Proper rates provide stability•Sold in pairs•TUV approved•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-310049 For 86-03 XL, 84-94 FXR, 84-10 FLT/FLHT/FLHR/FLTR $202.95

12 SERIES 11.5” SHOCKS WITHOUT SPRINGS•Gas-charged with fade-free damping and consistent operation

•Automatic, six-stage damping adjusts to a variety of conditions

•Special cams allow easy preload adjustment

•Springs sold separately; available in a variety of rates; PART #s DS-222014-16 and DS-310030-32 are recommended


NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.

PART # DESCRIPTION SUG. RETAILDS-2220141 70-120 psi chrome springs (std. spring on

chrome 4000 series shocks) $92.95DS-3100301 70-120 psi black springs (std. spring on black

4000 series shocks) 76.95DS-2220151 95-140 psi chrome springs 92.95DS-3100311 95-140 psi black springs 76.95DS-2220161 105-150 psi chrome springs 92.95DS-3100321 105-150 psi black springs 76.95DS-310035 125-170 psi black springs 76.95PS-1370C 90-130 psi chrome spring for 11.5” shocks only 92.95PS-1370B 90-130 psi black spring for 11.5” shocks only 76.95PS-1375C 115-155 psi chrome springs for 11” and 11.5”

shocks only 92.951 These springs will not fit shock PART #s DS-222003, DS-222009

or DS-310087.

REPLACEMENT SPRINGS FOR PROGRESSIVE SUSPENSION 12- AND 412-SERIES SHOCKS•Various rates allow fine-tuning for specific needs

•Choice of highly chromed and black springs•Sold in pairs•Made in the U.S.A.

NOTE: These springs must be ordered when ordering 12-series shocks. However, they can be used as replacements for the 412-series shocks.

PART # DESCRIPTION SUG. RETAILSMGV-S4001 For 99 X1 models (40mm x 12mm) $169.95

GOLD VALVE SHOCK KIT•Bolt-on shock valving for riders serious about suspension performance

•Improve control, traction, plushness and resistance to bottoming

•Any qualified mechanic can install them PART # DESCRIPTION SUG. RETAILDS-310094 For 88-06 FXSTS, 97-03 FLSTS, 05-07 FLSTSC

and 08-10 FLSTSB models $199.95

FRONT SHOCK•Chrome replacement shock for all OEM Springer forks•Features plush damping with more ride control•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-311001 For 97-10 FLSTS, 05-10 FLSTSC/FLSTSB

88-10 FXSTS Springer models $184.95

31 SERIES SPRINGER DAMPER•Velocity-sensitive damping provides superior damping performance

•Attractive chrome finish•Dual-wall construction for extra durability•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 89-07 FXST1312-0131 Big Red shock springs $149.951312-0132 Big Blue shock springs 149.951312-0133 Big Gray shock springs 149.95

BIG SHOCK SPRINGS•Ideal for lowered Softails•Stronger than stock springs; prevent bottoming out

•Big Red springs are recommended for solo riders; rated for 1200 psi

•Big Blue springs are recommended if occasionally carrying a passenger or the rider weight is 220-290 lb.; rated for 1300 psi

•Big Gray springs are for lowered machines that often carry passengers or the rider weight is 300+ lb.; rated for 1400 psi

•Fit OEM and Progressive Suspension shock absorbers

1312-0131

DS-310030

DS-222014


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

ADJUSTABLE REAR LOWERING KIT•Made from 1144 stress-proof steel

•Zinc-plated finish•Lowers the rear of the motorcycle up to a full 2” lower than stock•Accepts all factory mounting hardware

984

PART # FITS MODELSUG.

RETAIL

1310-0391 For 88-03 XL $299.95

1310-0392 For 04-10 XL 299.95

1310-05721 For 04-10 XL 299.95

1310-0469 For 91-05 FXD (except FXDWG) 299.95

1310-0470 For 06-10 FXD 299.95

1310-0471 For 84-10 FLT/FLHT/FLHR/FLTR w/o cartridge style forks 299.95

1 Black shock springs and covers.

SLAMMER KITS•Complete lowering kit includes shocks with chrome springs and covers (unless noted) and fork springs

•Easy to install fork springs that do not require the removal of forks•Drop-in fork springs lower front end up to 2”•Shocks lower rear up to 21/2”•Made in the U.S.A.

NOTE: Not for 1200S models.


DS-222180 For 00-06 FXST/FLST exc. Springer and Deuce (lowers FXST front 21/2”, FLST front 2”, back 11/2”) $178.95

1304-0165 For 07-08 FLHT, FLTR 241.95

COMPLETE LOWERING KITS•Lowers the front and rear using one kit•Kit includes shortened dampers, rear shock adjusters and a shortened chrome kickstand

•Uses OEM front springs

NOTE: Ground clearance and tire clearance must be checked when installing these kits.


DS-221800 For 00-10 FXST/FLST (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC) $69.95

1304-0168 For 89-99 FXST/FLST 104.95

REAR ADJUSTABLE LOWERING KITS•Gives bike a sleek, low profile•Lower from 1-2”•Each kit includes mounting hardware or is designed to use factory hardware


NOTE: Check all clearances prior to riding.


DS-305050 Chrome, all 00-10 FXST/FLST OEM shocks only (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW/FXCWC) $128.95

DS-305046 Chrome, 89-99 OEM and Progressive shocks 128.95

FXST/FLST LOWERING KITS•Adjustable from stock height to 2” lower than stock•Kits for early 84-88 will only fit Progressive FXST/FLST shocks

•Kits for late 89-99 FXST/FLST will fit both the stock shocks and Progressive FXST/FLST shocks



1304-0210 For 88-99 FXST, FLST models $94.95

1304-0149 For 00-10 FXST, FLST models (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW/C) 54.95

REAR ADJUSTABLE LOWERING KITS•Reduces height as much as two inches•Once installed, look and feel of the bike can be customized to rider’s preference


1304-0076

1304-0075

DS-221800

DS-305050

DS-222180

1310-0391

1304-0168

1304-0165

1304-0210

SHOCK LOWERING KITS•Lower the rear of any FXST/FLST•Available in standard and adjustable height versions•Standard kits have four machined spacers and a special shock disassembly tool for 84-88 models, two new shock end rods and six special nylon washers for 89-99 models

•Adjustable kits are fully adjustable without having to remove shock mounting bolts and feature a sealing design to protect the heim bearings from the elements

•Both come with instructions for easy installation



STANDARD KITS

DS-221902 For 00-10 FXST, FLST (1” lower) (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC) $72.95

DS-310075 For 89-99 FXST, FLST (11/4” lower) 79.95

ADJUSTABLE RIDE HEIGHT KITS

DS-221900 For 00-10 FXST, FLST (0” to 11/4” lower) (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC); chrome/gold anodized finish 109.95

DS-221901 For 00-10 FXST, FLST (0” to 11/4” lower) (except 05-10 FLSTN, 07 FXSTD, 08-10 FXCW, FXCWC); silver zinc finish 99.95

DS-310083 For 89-99 FXST, FLST (up to 2” lower); chrome finish 129.95

DS-310072 For 89-99 FXST and FLST (up to 2” lower); standard finish 99.95

DS-310071 For 84-88 FXST and FLST (up to 2” lower); standard finish 99.95

DS-310083DS-221901

DS-221900

DS-310075DS-221902


1304-0076 For 00-10 FXST, FLST models (except 08-10 FXCW/C, 05-10 FLSTN, 07 FXSTD) $55.95

1304-0075 For 89-99 FXST, FLST models 74.95

1304-0149

1310-0392


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

985

PART # DESCRIPTION SUG. RETAILCHROME1304-0301 For 02-10 FLHT/FLHR/FLTR (except FLHRS, FLHRC) (steel construction) - 1” drop $109.951304-0298 For 95-05 Dyna Glide - 1.5” drop 109.951304-0299 For 06-10 Dyna Glide - 1” drop 109.951304-0300 For 05-10 XL - 1” drop 109.95BLACK1304-0221 For 02-10 FLHT/FLHR/FLTR (except FLHRS, FLHRC) (steel construction) - 1” drop 104.951304-0207 For 97-01 FLT, FLHT, FLHR, FLTR - 1” drop 94.951304-0208 For 85-96 FLT, FLHT, FLHR - 1.5” drop (steel construction) 94.951304-0150 For 95-05 Dyna Glide - 1.5” drop 104.951304-0151 For 06-10 Dyna Glide - 1” drop 104.951304-0153 For 05-10 XL - 1” drop 104.951304-0206 For 00-04 XL - 1” drop 94.951304-0209 For L89-99 XL - 1” drop 94.951304-0277 For 02-10 V-Rod 94.95

LOWERING KITS•All kits are CNC-machined from 6061 billet aluminum unless noted in chart•Black anodized or chrome finish•Come complete with all necessary mounting hardware and instructions•FXD kits not for use with FXDB, FXDL, FXDS, FXDXT

NOTE: Rear lowering kits are not to be used in conjunction with “shorty” or “low-profile” shocks.

NOTE: Check all clearances before operating.

NOTE: Not for use on Hugger, 883/1200C/883L/1200L/1200N models.

REAR LOWERING KITS•Kits are available in chrome and powder-coat black steel•Simple bolt-on installation; comes with mounting hardware•Designed for OEM and most aftermarket stock length shocks•97-10 FLHT models are lowered approximately 1”; 85-96 FLHT, FLT models are lowered approximately 1.5” using OEM air shocks (not for FLHX, FLHRCI, FLHRS/SI models)

•91-10 FXD models are lowered approximately 1” (not for FXDB, FXDL, FXDS, FXDXT)•86-10 XL models are lowered approximately 1”; wheel travel is reduced 1/2” for stock (not for Hugger and 883 or 1200 Custom Deluxe, 883L, 1200L, 1200N, XL50)

•87-94 FXR models are lowered approximately 2” (not for FXRT, FXRP)•Made in the U.S.A.

NOTE: Rear lowering kits are not to be used in conjunction with “shorty” shocks or “low-profile” shocks.

NOTE: Fender-to-belt and tire clearance must be checked along with frame and exhaust clearance. Saddlebags may require spacing.


RETAILCHROMEDS-221476 For 97-01 FLHT/FLHR/FLTR $124.95DS-221454 For 85-96 FLT/FLHT/FLHR 104.951304-0103 For 06-10 FXD 124.951304-0111 For 05-10 XL 119.95DS-221905 For 00-03 XL 94.95DS-221455 For L89-99 XL 94.95


RETAILBLACK1304-0341 For 09-10 FLHT/FLHR/FLTR $119.951304-0091 For 02-08 FLHT/FLHR/FLTR 98.95DS-221475 For 97-01 FLHT/FLHR/FLTR 104.95DS-221443 For 85-96 FLT/FLHT/FLHR 104.951304-0102 For 06-10 FXD 119.95DS-221903 For 00-01 FXD 119.95


RETAILBLACK (CONT)DS-221462 For 91-99 FXD $109.951304-0110 For 05-10 XL 109.95DS-221468 For 00-03 XL 79.95DS-221446 For L89-99 XL 79.95

DS-221454

DS-221455

1304-0207

1304-0206

1304-0209

1304-0221

DS-221443

DS-221462

DS-221468

DS-221446

1304-0301

1304-0298

1304-0299 1304-0300

1304-0277


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

986

440 RETRO FIT COVER KIT•Update the look of your 440 series shocks with this stylish cover kit

•Available in chrome•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1320-0008 Chrome $124.95

CHROMED SHOCK TOP STUD COVERSPART # DESCRIPTION SUG. RETAILDS-310012 For 84-94 FXR except FXRT, 86-90 XL;

repl. OEM #54707-88A (pr.) $11.95DS-310011 For 85 FX; 85-86 FXWG;

repl. OEM #54704-65 (pr.) 10.95

CHROME SHOCK COVER KITS FOR PROGRESSIVE SHOCKS•Available for Progressive 412 series shocks on various H-D models



RETAILPS-5028C Top covers for 11” Progressive shocks (DS-222013)

on 85-86 FX, 85-86 FXWG; and 11” Progressive shocks (DS-310061) on 91-10 Dyna Glide models $86.95

PS-5029C Top covers for 12” Progressive shocks (DS-222004) on 85-86 FX, 85-86 FXWG; and 12” Progressive shocks (DS-310060) on 91-10 Dyna Glide models 81.95

PS-5027C Top and bottom covers for 11” Progressive shocks (DS-310092) on 84-10 FLT, 84-94 FXR and 86-10 XL models 97.95

SOFTAIL SHOCK MOUNTING KITS•PART #DS-310124 includes two chrome shoulder bolts, four washers and two nylock nuts

•PART #DS-310125 includes four chrome shoulder bolts and washers•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-310124 For 00-09 Softail models $17.95DS-310125 For 84-99 Softail models 21.95

SHOCK STUDS•Zinc-plated studs are available in upper and lower styles•Nylock nuts are cadmium-plated and cup washers are chrome-plated

•Studs are sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILUPPER SHOCK STUDSDS-310182 For 85-86 Big Twin $15.95NUTS AND WASHERSDS-175032 5/8”-18 thin nylock nuts (2-pk.) 2.95DS-310186 Cup washers 3/8” i.d. (10-pk.) 2.95DS-310187 Cup washers 5/8” i.d. (10-pk.) 2.95DS-310188 Cup washers 1/2” i.d. (10-pk.) 2.95

THIN NYLOCK SHOCK STUD NUTS•Zinc-plated, 5/8”-18 thread•Sold in 2-packs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-175032 5/8”-18 thin nylock nuts $2.95

POLISHED STAINLESS STEEL SHOCK BOLT KITS•Polished to a mirror finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2401-0182 For 00-10 Softail models $26.952401-0183 For 84-99 Softail models 46.95

DS-310012

PS-5028C

PS-5027CDS-310124 DS-310125

DS-310182

DS-175032

DS-310186

PART # DESCRIPTION SUG. RETAIL1304-0170 For 91-99 Dyna models (except FXDWG) $115.951304-0179 For 02-10 FLT, FLHT models 169.951304-0172 For 02-10 V-Rod models w/ 180mm rear tire

only (except Screamin’ Eagle) 104.951304-0173 For 00-03 XL 108.951304-0171 For 89-99 XL 108.95

STANDARD DROP REAR LOWERING KITS•Gives your bike a sleek, low profile•Finished in black or polished to match factory swingarm•Lowers approximately 1”•Each kit includes required mounting hardware or is designed to use factory hardware


NOTE: Check all clearances prior to riding.

NOTE: Not for use on Hugger 883/1200C, 883L/1200L, 1200N models.

PART # DESCRIPTION SUG. RETAIL1304-0204 For 02-10 FLHT, FLHR, FLHX, FLTR

(except FLHRC/FLHRS) $132.951304-0340 For 97-01 FLHR, FLHT, FLTR models 122.95

REAR SHOCK LOWERING BRACKET KIT•Makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with its lower center of gravity

•Lowers your bike 1” leaving adequate room for stock tire-to-fender clearance; designed to retain the use of the stock rubber shock boot

•CNC-machined from billet steel with a black finish•Easy to install in approximately 30 minutes with common tools, and includes instructions and hardware


NOTE: Saddlebag modification necessary for installation on FLHRC models.

1304-0171

1304-01721304-0170

1304-0340

1304-0204

2401-0183


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

987

PART # DESCRIPTION SUG. RETAIL16”/18” FRONT WHEELS1401-0258 Thickster $249.951401-0257 Uncut 249.951401-0259 Slicer 249.951401-0260 Wrapper 249.951401-0263 Swoop 249.95

PART # DESCRIPTION SUG. RETAIL16”/18” FRONT WHEELS (CONT)1401-0262 Tude $249.951401-0261 Level 249.9521” FRONT WHEEL1401-0265 Thickster 249.951401-0264 Uncut 249.95

PART # DESCRIPTION SUG. RETAIL21” FRONT WHEEL (CONT)1401-0266 Slicer $249.951401-0267 Wrapper 249.951401-0270 Swoop 249.951401-0269 Tude 249.951401-0268 Level 249.95

TIRE HUGGER SERIES FRONT FENDERS•Fenders are thick enough to add rigidity to the front end by acting like a fork brace but can still be cut or shaped enough for an even more Kustom appearance

•All fenders come predrilled and E-coated and are stamped, not spun, for the ultimate smooth long-lasting fender

•16”, 17” and 18” fenders measure 6.25” outside width and will accommodate up to a 140 series tire

•21” styles measure 5.875” outside width and will fit the current 120/21 series tires on 31/2” wide rims•21” Skinny measure 4.5” outside width and will fit models listed with the stock narrow rim and a tire up to 100/100-21•Installation requires use of Klock Werks Tire Hugger Front Fender Mounting Blocks, available separately•Made in the U.S.A.

NOTE: The uncut style is drilled but needs to be cut for clearance on the rotors and brakes. Make it Kustom!

PART # DESCRIPTION SUG. RETAIL21” FRONT WHEEL1401-0282 Slicer $249.951401-0280 Wrapper 249.951401-0281 Level 249.95


RETAIL16”/17”/18” FRONT WHEEL1401-0212 Thickster $249.951401-0216 Uncut 249.951401-0220 Slicer 249.951401-0224 Wrapper 249.951401-0228 Swoop 249.951401-0232 Tude 249.951401-0236 Level 249.95


RETAIL21” FRONT WHEEL1401-0213 Thickster $249.951401-0217 Uncut 249.951401-0221 Slicer 249.951401-0225 Wrapper 249.951401-0229 Swoop 249.951401-0233 Tude 249.951401-0237 Level 249.95


RETAIL16”/18” FRONT WHEELS1401-0210 Thickster $249.951401-0214 Uncut 249.951401-0218 Slicer 249.951401-0222 Wrapper 249.951401-0226 Swoop 249.951401-0230 Tude 249.951401-0234 Level 249.95


RETAIL21” FRONT WHEEL1401-0211 Thickster $249.951401-0215 Uncut 249.951401-0219 Slicer 249.951401-0223 Wrapper 249.951401-0227 Swoop 249.951401-0231 Tude 249.951401-0235 Level 249.95

Thickster

Uncut

Slicer

Wrapper

Swoop

Tude

Level

SKINNY FOR 84-10 FXST/ FXSTB/ FXSTI/ FXSTBI, 93-05 FXDWG AND CUSTOM APPLICATIONS WITH UP TO 100/100 SERIES TIRES (NARROW STYLE)

FOR 86-10 FLST (ALL EXCEPT SPRINGER)

FOR 84-10 FLT, FLHT, FLHX, FLHR, FLTR MODELSFOR 84-10 FXST/ FXSTB/ FXSTI/ FXSTBI, 93-05 FXDWG AND CUSTOM APPLICATIONS

1401-0281


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

988

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST/FLST MODELS (EXCEPT FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS1401-0197 16” or 18” front wheel $249.951401-0195 21” front wheel 249.95

BENCHMARK FRONT FENDERS FOR SOFTAILS•Stamped from 14-gauge U.S. steel, these 61/2” wide fenders are E-coated to prevent rust and corrosion with the lowest paint prep in the industry

•Fenders are predrilled to fit 16”/18”, or 21” front wheels•May also be used in a variety of custom applications•The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work

•No mounting blocks required•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 94-10 FLT, FLHT, FLHR, FLTR MODELS1401-0243 51/2” W for 21” front wheel $224.951401-0139 61/2” W for 16” or 18” front wheel 239.95

PART # DESCRIPTION SUG. RETAILFOR 94-10 FLT, FLHT, FLHR, FLTR MODELS (CONT)1401-0284 61/2” W for 16” or 18” front wheel (w/ brake

line clearance) $239.951401-0205 61/2” W for 21” front wheel 239.95

CUSTOM REPLACEMENT FRONT FENDERS•5.5” and 6.5” wide, heavy-gauge 16-gauge steel construction

•Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork

•Comes predrilled for easy installation•Require spacers•PART #1401-0284 designed with clearance for brake lines

•Handmade in the U.S.A.

NOTE: All measurements are approximate.

PART # DESCRIPTION SUG. RETAIL4.5” WIDE1401-0170 Long, flared $229.951401-0171 Short, flared 229.951401-0172 Pointed, flared 229.95

PART # DESCRIPTION SUG. RETAIL5.5” WIDE1401-0173 Long, flared $229.951401-0174 Short, flared 229.951401-0175 Pointed, flared 229.951401-02061 Long, flared 229.951 For 23” wheel.

FRONT FENDERS•Bolts directly to Softail fender mounts (67/8” wide) with no spacers required

•Predrilled, horizontal bolt patttern•4.5” fenders fit a 90/90 tire with a 21” wheel•5.5” fenders fit a 120/70 tire with a 21” wheel; unless noted•Made in the U.S.A.

FOR 84-10 FXST/FLST (EXCEPT FXSTD, SPRINGERS)

1401-0243

1401-0284

1401-0139

1401-0170 1401-0171

1401-0172

1401-0197

1401-0195WFB™ BENCHMARK FRONT FENDERS•Stamped from 14-gauge U.S. steel, these 61/2” wide fenders are E-coated to prevent rust and corrosion with the lowest paint prep in the industry

•Fenders are predrilled to fit 16”, 17” or 18”, or for a very radically Kustom look, 21” front wheels

•Rivetless smooth sides and an extended 1.5” rear tail; fenders are a great match for any rear fender and add a clean yet dramatic flow to your stock FL

•The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work

•Installation requires use of Klock Blocks front fender mounting blocks available separately, PART #s 1410-0022 and 1410-0023

•The Benchmark fenders can be paired with the WFB™ rear fender to complete the Klock Werks Kustom look


PART # DESCRIPTION SUG. RETAILFOR 83-10 FLT, FLHT, FLHX, FLHR, FLTR MODELS1401-0196 For 16”/17”/18” front wheel $249.951401-0194 For 21” front wheel 249.95

1401-0196

1401-0194


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

989

PART # DESCRIPTION SUG. RETAIL4.5” WIDE FENDERS1401-0001 Long O.C.F.; 21” wheels $229.954.75” WIDE FENDERS1401-0283 Long O.C.F.; 19” wheels 229.951925-2757 Rambler; 19” wheels 229.951925-2753 Rambler; 21” wheels 229.95DS-380278 Duster; 19”/21” wheels 229.95DS-380279 Maverick;

19”/21” wheels 229.95DS-380334 Gambler; 19/21” wheels 229.95DS-380041 Outlaw; 19”/21” wheels 229.95DS-380474 Stinger; 21” wheels 239.95DS-380370 Longshot; 19” wheels 239.95DS-380473 Longshot; 21” wheels 239.955.5” WIDE FENDER1401-0148 Long O.C.F.; 21” wheels;

433/8” L x 133/4” radius 229.95

PART # DESCRIPTION SUG. RETAIL5.5” WIDE FENDER (CONT)1401-0244 Long O.C.F.; 21” wheels;

45” L x 141/4” radius $224.95DS-380489 Stubby; 3” x 21” wheels 239.95DS-380490 Rambler;

3” x 21” wheels 239.95DS-380491 Gambler;

3” x 21” wheels 239.956.25” WIDE FENDERS (16” WHEELS)1401-0155 Long O.C.F. 229.951925-2754 Stubby 229.951925-2755 Rambler 229.95DS-380276 Duster, 361/2” L 229.95DS-380369 Stinger, 323/4” L 239.95DS-380372 Longshot, 361/2” L 239.956.25” WIDE FENDERS (18” WHEELS)1401-0149 Stubby 229.95

PART # DESCRIPTION SUG. RETAIL6.25” WIDE FENDERS (18” WHEELS) (CONT)1401-0150 Rambler $229.951401-0151 Longshot 229.951401-0153 Stinger 229.951401-0154 Long O.C.F. 229.956.25” WIDE PREDRILLED FENDER FOR FXSTD1925-0002 Cobra 229.951925-0003 Rambler 229.956.75” WIDE PREDRILLED FENDER FOR WIDE GLIDEDS-380469 Cobra; 21” wheels 228.951 Not for use with OEM frames; requires frames

with at least 2” stretch.

CUSTOM FRONT FENDERS•Heavy-gauge steel construction•Fenders are inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork

•Comes undrilled (unless noted) so you can position it to look and work best for your application



Long O.C.F.

Stubby

Gambler

Rambler1925-0003

MaverickOutlaw Stinger

Longshot

Cobra1925-0002

DS-380469

Rambler1401-0150

Long O.C.F.

Cobra


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

990

PART # DESCRIPTION SUG. RETAIL1925-6789 For 00-07 FXSTD (repl. OEM #59876-00) $59.95DS-393492 For 84-10 FXST, 85-86 FXWG models;

repl. OEM #59924-80A 47.95

PART # DESCRIPTION SUG. RETAIL1401-0191 For 93-06 FXSTS; repl. OEM #59176-96A $64.95DS-393493 For 88-92 FXSTS; repl. OEM #59176-88 40.95

FRONT FENDERS•Raw stamped-steel-construction fender maintains a low-tire profile and comes complete with chrome mounts•Attach with OEM hardware

PART # DESCRIPTION SUG. RETAIL1401-0043 For 90-99 FLSTF models (exc. Springer) $122.95

STEEL FRONT FENDER•No rivet, smooth sided steel construction•Designed to fit FLSTF front ends with 16” wheels•Will also fit FLT/FLHT models if used in conjunction with PART # DS-222128 or DS-222129 fender to fork adapters

PART # DESCRIPTION SUG. RETAILDS-393482 For 85 FX, 84-94 FXR, 91-05 Dyna and

86-10 XL Narrow Glide front ends w/ 18” or 19” front tires $47.95

XLX-STYLE FRONT FENDER•Steel construction with chromed side braces

PART # DESCRIPTION SUG. RETAILDS-380038 For 85 FX, 84-94, 99 FXR, 91-05 FXD and 86-10 XL models;

may be used on FXST and FXWG models by using fender mounting kit PART #DS-222940; repl. OEM # 59007-73B $61.95

DS-380031 Mount brackets for fender (pr.) 24.95DS-222940 Fender mounting kit for use on 84-10 FXST,

93-05 FXDWG and 85-86 FXWG 15.95

FRONT FENDER•Original-style fender

NOTE: Chrome fender brackets must be ordered separately.

PART # DESCRIPTION SUG. RETAILDS-380066 61/2” Quickbob fender for

85-86 FXWG, 84-10 FXST and 93-05 FXDWG $175.95

QUICKBOB® STEEL FRONT FENDER•Yesterday’s style and Drag Specialties quality steel construction combine to create a nostalgic look

1925-6789

DS-393492

DS-393493

1401-0191

DS-380038

DS-222940

DS-380031

DS-380066


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

991

PART # DESCRIPTION SUG. RETAIL8638 For Wide Glide front ends w/ 16” wheels $228.95

CANADIAN FRONT FENDER•Designed by McKay’s Cycle Creations•High-strength composite glass construction is lighter and stronger than fiberglass

•Perfectly straight sidewalls

PART # DESCRIPTION SUG. RETAIL1401-0295 For 86-10 FLT/FLHT/FLHR/FLTR/FLHX

w/ a 23” dia. front wheel $494.95

CLASSIC STRETCHED FRONT FENDER FOR 23S•High quality pressure-formed front fender•Styled in the classic Bagger look with a 4” stretch on the rear for that slammed hot-rod look

•Fenders are 3D molded and hand finished; requires no special mounting blocks or holes to be drilled before installation


PART # DESCRIPTION SUG. RETAIL1401-0296 For 86-10 FLT/FLHT/FLHR/FLTR/FLHX

when using a 23” dia. front wheel $479.95

THICKY STRETCHED FRONT FENDER FOR 23” WHEELS•High quality, pressure-formed front fender lets you run a 23” front wheel on your bagger

•Fender has contemporary Pro Street style with a full tire-wrap hugging profile

•Requires the use of fender spacer PART #s 1410-0039 or 1410-0040 for installation


PART # DESCRIPTION SUG. RETAIL1401-0254 For 16”/18” wheels, 4.75” wide $299.951401-0255 For 21” wheel, 4.75” wide 299.95

THICKY FRONT FENDERS•Premium 12-gauge steel construction, raw finish•Heavy sidewalls for full-tire coverage•Added surface area allows for more elaborate custom paint designs•Requires custom mounting and a fender mount spacer kit, sold separately


PART # DESCRIPTION SUG. RETAIL1401-0253 DEI fender for 21” wheels $299.95

DEI 21” FRONT FENDER•Radically-shaped fender is a great way to upgrade the look of your ride•12-gauge steel construction, raw finish•Designed to fit 21” tires•Measures approximately 4.75” wide•Requires custom mounting•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL

1401-0146 5.5” W $182.951401-0147 6.5” W 182.95

CUSTOM FRONT FENDER BLANKS•Heavy-gauge steel construction•Sized large enough to cut out your own style•Comes undrilled so you can position it to look and work best for your application



1401-0147

1401-0146

1401-0254


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

992

PART # DESCRIPTION SUG. RETAILFOR FLHT/FLHR MODELS1401-0209 Fits 120/70 tire $222.951401-0245 Fits 90/90 tire 214.95

21” FRONT FENDERS•Composite and fiberglass construction

•Lightweight yet durable•Fit tires with a 21” wheel•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1401-0273 For 00-10 FLT models

and 87-99 FLT models w/ 21” x 3.50” tire $224.95

“BIG WHEELER” FRONT FENDER•Great style pre-drilled fiberglass fender dramatically improves the front end of your bike

•A must when using the 21” x 3.50” wheel•Direct replacement fender for 00-10 FLT models

PART # DESCRIPTION SUG. RETAILFOR USE WITH 19” OR 21” FRONT WHEELSDS-380258 43/4” W, for most narrow glide applications $161.95FOR USE WITH 16”, 17” OR 18” FRONT WHEELSDS-380256 63/4” W, for most Wide Glide applications 224.95DS-380257 61/4” W, for FLST applications 224.95

FRONTDRAGGER FENDERS•Very popular fiberglass fender design that matches the Taildragger fenders•Available for Wide Glide and narrow glide applications•Made in the U.S.A.

NOTE: All fenders must be prefitted before painting.

PART # DESCRIPTION SUG. RETAILDS-380263 For use w/ any

Wide Glide front end using a 16”, 17” or 18” wheel $239.95

LEGACY FRONT FENDER•Dynamic fender designed to match Legacy rear fenders

•Measures 61/2” W•Made in the U.S.A.

NOTE: For use with stretched frames only.

NOTE: Fenders may vary up to 1/4” W.

PART # DESCRIPTION SUG. RETAILDS-380048 For most narrow

glide-type front ends $59.95

CAFE-STYLE FRONT FENDER•Created by Arlen Ness•Sleek design made of durable ABS plastic•Easy to install and ready for primer and paint•Made in the U.S.A.


RETAILDS-380037 For Wide Glide using 16”

or 18” front wheels $79.95

WIDESPORT FRONT FENDER•Sleek, ABS plastic fender is cleaner looking and lighter than the Fat Boy fender


1401-0209

1401-0245

DS-380256 DS-380258


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

993

PART # DESCRIPTION SUG. RETAIL1401-0044 For 02-06 V-Rod $299.95

FAT ROD FRONT FENDER•Fiberglass construction•Bagger-style design•Matching rear fender, (PART #1401-0045) available separately


PART # DESCRIPTION SUG. RETAILNARROW GLIDE1925-8639 Dominator (51/4” W 18”/19”) $186.951401-0207 StreetSweeper

(4.5” W 18”/19” wheels 100/90 tire) 228.95DS-380090 Skirted LoBoy (4.5” W 19” wheels 100/90 tire) 162.95DS-380091 Loboy® (4.5” W 19” wheels 100/90 tire) 162.951401-0130 Hugger (4.5” W 19” wheels 100/90 tire) 175.95WIDE GLIDE1401-0015 Dominator (7” W 21” wheels 90/90 tire) 175.95

PART # DESCRIPTION SUG. RETAILWIDE GLIDE (CONT)1401-0016 Dominator (7” W 21” wheels 120/70 tire) $175.95DS-380475 Loboy Sweeper (6.5” W 16” wheels) 231.951401-0183 Loboy Sweeper FL w/ ears (6.5” W 16” wheels) 230.951401-0182 Loboy® (6.5” W 16” wheels) 175.958625 StreetSweeper (6.5” W 16” wheels) 299.958614 Smooth Sport (6.5” W 16” wheels) 161.951401-0131 Hugger (6.5” W 16” wheels) 199.951401-0208 Hugger FL w/ ears (8.5” W 16”/18” wheels) 200.95

FRONT FENDERS•Made from new space-age materials that are lighter and stronger than fiberglass

•Not predrilled, allows custom positioning

•Prime and paint with minimal prep


1401-0015

1925-8639

1401-0130

1401-0207

DS-380090 DS-380091

DS-380475

1401-0183

1401-0182

8625

8614

1401-0131

1401-0208


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

994

CHROME FRONT FENDER SPACER KIT•For FXSTD models when using a Paul Yaffe Original front fender

• Includes four spacers, two measuring 1” and two measuring 13/16”


PART # DESCRIPTION SUG. RETAIL1410-0013 For 00-07 FXSTD Deuce $99.95

FENDER SPACER KITS•Billet aluminum construction•Make installing fenders fast and easy•Feature Domino styling on one side and smooth styling on the other for a choice of custom looks

•Spacers are 3.5” L x 1” W’; 3” on-center holes•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT, FLHT, FLHR, FLTR, FLHX1410-0039 Satin $77.951410-0040 Black powdercoat 87.95

BILLET FENDER ADAPTERS•Chrome billet spacers•PART #1410-0018 is used when adapting a narrow-glide fender to a 41mm wide-glide front fork; measures 1.125” thick, 2.75” on-center blind holes and 2.6” on-center mounting holes

•PART #1410-0019 is used to adapt a Deuce front fender to a Wide Glide fork; measures .875” thick, 2.6” on-center horizontal holes and 2.75” on-center vertical holes

•Mounting hardware included•Sold in pairs•Made in the U.S.A. by Custom Cycle Engineering

PART # DESCRIPTION SUG. RETAIL1410-0018 Narrow-glide fender to mid-glide front end $100.951410-0019 Deuce fender to Wide Glide front end 118.95

FRONT FENDER ADAPTERS•CNC-machined billet aluminum construction•Relocates stock fender when converting to 21” front wheel•Available in chrome or black finish•3” on-center mounting holes•Hidden mounting design•.750” thick x 13.5 L x 5.25” H•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLT, FLHT, FLHR, FLTR AND CUSTOM TOURING MODELS1410-0025 Chrome $399.951410-0026 Black 399.95

FENDER-TO-FORK ADAPTERS•Adapt FLSTF front fender to any 84-10 FLT or FLHT style fork using a 16” wheel

•Work with FLSTF fender PART #1401-0043•Can also be used in many custom applications•Adapters measure 311/16” L x 111/16” W, 3/4” thickness•Top holes are 5/16” with 23/4” centers, bottom holes are also 5/16” with 3” centers


PART # DESCRIPTION SUG. RETAILDS-222128 Chrome $74.95DS-222129 Raw 64.95

POLISHED FENDER ADAPTERS•Polished billet aluminum with blind hole design; hides all mounting hardware

•Designed to mount any FXST/FLST (except Springer) front fender to an FLT- or FLHT-style front fork

•Adapter measures 35/8” L x 15/8” H x 3/4” W


PART # DESCRIPTION SUG. RETAIL1410-0002 Fender adapters (pr.) $108.95

FENDER-TO-FORK ADAPTER FOR 21” WHEEL•Chromed aluminum adapters allow custom front fender installation

•Designed to work with RWD 51/2” wide undrilled fender for 3” x 21” wheels

•1/4” diameter, 21/2” on-center blind hole fender mounts

•5/16” diameter, 3” on-center fork leg mount holes

•Measure 1.250” thick•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1410-0021 For 84-10 FLT models $92.95

1410-0019

1410-0018

DS-222128

1410-0039

1410-0040

1410-0025 1410-0026

DS-222129


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

995

WFB BENCHMARK BAGGER FRONT FENDER BLOCKS•Machined from billet aluminum and available in a chrome or raw finish•Less is more in this minimalist part that provides perfect spacing for your Road King, Road Glide, Street Glide or Ultra project

•Besides being used with Klock Werks’ Benchmark Front Fenders, they can be used for a variety of custom applications

•The spacers are 0.750” thick and hole spacing is 3” on center to fit FLT or FLHT style forks


NOTE: Will not fit Perse front forks.

PART # DESCRIPTION SUG. RETAILFOR 85-10 FLT, FLHT, FLHR, FLTR, FLHX MODELS1410-0022 Chrome finish $79.951410-0023 Raw finish 69.95

TIRE HUGGER FRONT FENDER MOUNTING BLOCKS•Use with Klock Werks’ front fenders, or they can also be used for a variety of custom applications•Machined from billet aluminum and are available in a chrome or raw finish•FLT/FLHT spacers measure 5/8” tall by 35/8” long and have 3” on-center holes. Spacers for 21” tires are 1” wide; spacers for 16”/18” tires are 7/8” wide•FLST spacers measure 5/8” tall by 3” long and have 23/4” on-center holes. Spacers for 21” tires are 3/8” wide; spacers for 16”/18” tires are 1/8” wide•FXST/FXDWG spacers measure 5/8” tall by 3” long and have 23/4” on-center holes. Spacers for 21” tires are 1/2” wide; spacers for 16”/18” tires are 1/4” wide

•FXST/FXDWG Skinny 21” fender spacers measure 5/8” tall by 3” long and have 23/4” on-center holes and are 11/4” wide•All are sold in pairs•Made in the U.S.A.

NOTE: Will not fit Perse front forks.

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST, 93-05 FXDWG MODELS (EXCEPT FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS1410-0041 16”/18” chrome finish $79.951410-0042 16”/18” raw finish 69.951410-0043 21” chrome finish 79.951410-0044 21” raw finish 69.95

PART # DESCRIPTION SUG. RETAILFOR 83-10 FLT, FLHT, FLHR, FLTR, FLHX MODELS1410-0029 16”/17”/18” chrome finish $79.951410-0030 16”/17”/18” raw finish 69.951410-0027 21” chrome finish 79.951410-0028 21” raw finish 69.95

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLST (EXCEPT SPRINGER)1410-0033 16”/18” chrome finish $79.951410-0034 16”/18” raw finish 69.951410-0031 21” chrome finish 79.951410-0032 21” raw finish 69.95 PART # DESCRIPTION SUG. RETAILSKINNY FOR 84-10 FXST, 93-05 FXDWG MODELS (EXCEPT FXSTD AND SPRINGERS) AND CUSTOM APPLICATIONS WITH UP TO 100/100 SERIES TIRES (NARROW STYLE)1410-0045 21” chrome finish $79.951410-0046 21” raw finish 69.95

1410-00311410-0032

1410-0027

1410-0028

1410-0045

1410-0022


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

996

PART # DESCRIPTION SUG. RETAIL1410-0014 11/4” W x 4” L x 3/8” T $61.951410-0015 11/4” W x 4” L x 1/4” T 55.95

PART # DESCRIPTION SUG. RETAIL1410-0016 3/4” W x 31/2” L x 1” T $61.951410-0017 3/4” W x 31/2” L x 3/4” T 55.95

FRONT FENDER SPACERS•Billet front fender spacers with brilliant chrome finish•Spacers accept 5/16” bolts and have 23/4” on-center holes•Sold in pairs•Made in the U.S.A.

ELITE CHROME FENDER SPACERS•Billet fender spacers allow the mounting of a narrow glide fender to a Wide Glide front end (except FLT/FLHT)

•Spacers accept 5/16” bolts•Have 2.750” on-center holes•Sold in pairs; made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT/FLHT1410-0036 Elite (.6875”) $107.951410-0037 Elite (1.25”) 107.951410-0038 Smooth (1.25”) 73.95

CHROME FENDER SPACERS•Billet fender spacers for mounting a Wide Glide front fenders

•Spacers accept 5/16” bolts with 3” on-center holes

•1.25” spacers can be used with custom 21” fenders


PART # DESCRIPTION SUG. RETAIL1410-0012 Economy fender spacer $71.95

ECONOMY FENDER SPACERS•Billet 1” fender spacers allow the mounting of a narrow glide fender to a Mid Glide or Wide Glide 41mm front end (except FLT/FLHT)

•Accept 5/16” bolts with 23/4” on-center holes•Sold in pairs; made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL7805-7807 For 41mm Wide-Glide (except FLT/FLHT); 1.250” $72.95

SLOTTED FRONT FENDER SPACERS•Chrome-plated, CNC-machined T-6 aluminum

•Allow easy adapting of fender to forks•Spacers accept 5/16” bolts and have 23/4” on-center holes•Made in the U.S.A.•Sold in pairs

FRONT FENDER BRACKETS•Brackets with rivets; sold in pairs

FRONT FENDER RIVETS•Heavy-duty 1/4” x 5/16” stainless steel rivets

•Sold in packs of 25

PART # DESCRIPTION SUG. RETAILDS-222940 For Wide Glide-style front ends $15.95

FENDER MOUNT KIT•Everything needed to mount a stock FX-, FXE- or XL-style front fender onto 83 FX models after the front end has been converted to Wide Glide-style

•Designed for use with our Wide Glide style conversion kits DS-222916•Spacers measure 11/2” L x 3/4” diameter with 5/16” hole

2406-4145

1410-0014

1410-0016

1410-0036

PART # DESCRIPTION SUG. RETAIL2406-4143 41mm Wide Glide (1.00”) $107.952406-4145 41mm Wide Glide (1.25”) 107.95

PART # DESCRIPTION SUG. RETAILDS-380034 For our FX- and XL-style front fender,

PART #s DS-380038; repl. stock rivets on 85 FX 84-94 FXRS and FXRT models $16.95

PART # DESCRIPTION SUG. RETAILDS-380031 For mounting original-style fenders on 85 FX; also fits 84-94, 99 FXR, 86-10 XL and 91-05 FXD models $24.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

997

PART # DESCRIPTION SUG. RETAILFOR 00-05 FXST/00-10 FLST (EXCEPT FXSTD, 07-10 FLSTF, 08-10 FLSTSB) (7.125” WIDE)1401-0246 4” stretch; frenched plate pocket $429.951401-0248 4” stretch; smooth 389.951401-0250 4” stretch; stocker 429.951401-0247 stock length; frenched plate pocket 429.95

PART # DESCRIPTION SUG. RETAILFOR 00-05 FXST/00-10 FLST (EXCEPT FXSTD, 07-10 FLSTF, 08-10 FLSTSB) (7.125” WIDE) (CONT)1401-0249 stock length; smooth $389.952030-0229 License frame, chrome lighted 199.952030-0230 License frame, chrome 59.952030-0231 License frame, raw 99.95

REAR FENDERS FOR SOFTAILS•Available in either 4” stretch for dramatic styling or stock length for the rider who wants to clean up the back of the bike

•Predrilled to match stock mounting locations and stamped in 14-gauge US steel

•Finished with an E-coating to prevent rust and corrosion

•Available with or without a frenched license plate pocket


NOTE: The 4” stretch is predrilled to accept FLSTC-style taillights and turn signals.

PART # DESCRIPTION SUG. RETAILFOR 00-05 FXST/00-10 FLST (EXCEPT FXSTD, 07-10 FLSTF, 08-10 FLSTSB) (7.125” WIDE)1401-0251 4” stretch; frenched plate pocket $429.951401-0252 4” stretch; smooth 389.952030-0229 License frame, chrome lighted 199.952030-0230 License frame, chrome 59.952030-0231 License frame, raw 99.95

BUILDERS SERIES 4” STRETCHED REAR FENDERS•These fenders are the exact same quality and dimensions as Klock Werks standard fender but without the mounting holes

•Result yields a smooth finish while minimizing work needed for bodywork•Stamped with 14-gauge US steel and E-Coated to prevent rust and corrosion•Available with or without frenched license plate pocket

PART # DESCRIPTION SUG. RETAILFOR 09-10 FLHT, FLHX, FLHR, FLTR MODELS (8.625” WIDE)1401-0277 4” stretch w/ frenched plate pocket $429.951401-0278 4” stretch w/ frenched plate pocket and

horizontal taillight cutout 469.951401-0279 4” stretch w/ frenched plate pocket and

vertical taillight cutout 469.951401-0274 4” stretch smooth 409.951401-0275 4” stretch smooth w/ horizontal taillight cutout 449.951401-0276 4” stretch smooth w/ vertical taillight cutout 449.95

PART # DESCRIPTION SUG. RETAILFOR 97-08 FLT, FLHT, FLHX, FLHR, FLTR MODELS (7.125” WIDE)1401-0238 2” stretch w/ frenched plate pocket $449.951401-0239 2” stretch smooth 399.95LICENSE PLATE FRAMES2030-0229 Chrome lighted 199.952030-0230 Chrome 59.952030-0231 Raw 99.95

STRETCHED BENCHMARK REAR FENDERS•Fender is available in either 4” stretch for dynamic styling or 2” stretch for the rider who simply wants to clean up the back of their bike

•Predrilled to match stock mounting locations and stamped with 14-gauge steel•Finished with an E-coating to prevent rust and corrosion•All are available with or without frenched license plate pocket; 4” stretch also available with horizontal or vertical light cutout

1401-0238

1401-0239

1401-0251

2030-0231

1401-0278

1401-0279

1401-0246


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

998

TRACKER REAR FENDER CONVERSION KITS•Designed to be used on OEM frames over any rear wide swingarm kit

•9” W fender is constructed from 1018 steel and is available in raw finish only

•Struts are made from 3/8î thick 1018 steel and available in chrome or black powdercoat finish

•Available with RSD 200mm rear fender or struts available separately for use with many other custom fenders

•All necessary hardware included•Made in the U.S.A.

NOTE: Requires the fender supports to be cut off 99-07 stock chassis.

1401-0193

2030-0229 2030-0231

1401-02911401-0198

1401-0178

1401-0201

1401-0193

WFB™ BENCHMARK 6” STRETCHED REAR FENDERS•Stamped from 14-gauge U.S. steel, these fenders are E-coated to prevent rust and corrosion•Deep-draw stamping technology ensures a consistent flawless finish while minimizing body work•Standard rear fenders for 97-08 touring models are 6” longer than a stock rear touring fender and are a direct replacement

•Fenders for Rolling Thunder, Daytec, and Chopper Guys 200 tire Bagger frames can also be used in custom applications

•Fenders for touring models mount in the stock location using all stock mounting hardware; all mounting holes are located and laser pre-cut to simplify the installation process

•License frames will perfectly fit stretched fenders listed or can be used in custom applications, include mounting hardware and accept most 4” x 7” license plates.

•All fenders and frames are made in the U.S.A.


RETAILFOR 97-08 FLT, FLHT, FLHX, FLHR, FLTR MODELS (7.125” WIDE)1401-0192 Fender, smooth style $389.951401-0193 Fender, frenched style 429.952030-0229 License frame, chrome lighted 199.952030-0231 License frame, chrome 99.952030-0230 License frame, raw 59.95


RETAILFOR ROLLING THUNDER, DAYTEC, AND CHOPPER GUYS 200 TIRE BAGGER FRAMES (8.625” WIDE)1401-0201 Fender, smooth style $389.951401-0202 Fender frenched style 429.952030-0246 License frame, chrome lighted 199.952030-0248 License frame, chrome 99.952030-0247 License frame, raw 59.95

VINTAGE REAR FENDER CONVERSION KITS•Fender inspired by the Softail conversion Roland Sands Design created and dubbed El Borracho•Designed to be used on OEM frames over any rear wide swingarm kit•Kits include chrome billet fender struts and steel fender•200mm fender measures approximately 9” W•240mm fender measures approximately 10.5” W•Matching seat kit, gas tank kit and handlebars sold separately•All mounting hardware included•Made in the U.S.A.

NOTE: Requires the fender supports to be cut off of 90-07 stock chassis.

PART # DESCRIPTION SUG. RETAILFOR 08-10 FXST/FLST W/ 200MM REAR TIRE1401-0271 Fender kit $899.951401-0200 Fender only 231.951411-0028 Fender struts only 828.95FOR 90-07 SOFTAIL W/ 200MM REAR TIRE1401-0198 Fender kit 899.951401-0200 Fender only 231.95

PART # DESCRIPTION SUG. RETAILFOR 90-07 SOFTAIL W/ 200MM REAR TIRE (CONT)1411-0014 Fender struts only $828.95FOR 90-07 SOFTAIL W/ 240MM REAR TIRE1401-0178 Fender kit 799.951401-0199 Fender only 238.951411-0013 Fender struts only 659.95


RETAILFOR 08-10 FXST/FLST W/ 200MM REAR TIRE1401-0291 Fender kit with

chrome struts $599.951401-0292 Fender kit with black struts 599.951411-0031 Chrome fender struts only 399.951411-0032 Black fender struts only 399.95FOR 90-07 SOFTAIL W/ 200MM REAR TIRE1401-0289 Fender kit with

chrome struts 599.951401-0290 Fender kit with black struts 599.951411-0029 Chrome fender struts only 399.951411-0030 Black fender struts only 399.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

999

STYLE 7.25” WIDE 8.5” WIDE 9” WIDE 10.5” WIDE 11” WIDE 13” WIDE LENGTH SUG. RETAILFOR SWINGARM FRAMESRacer - - - - DS-380620 - 303/4” $393.95Cruiser 1401-0242 DS-3804681 DS-3804671 - DS-380619 - 431/2” 393.95Duster DS-380327 - DS-380323 - - - 451/4” 314.95Maverick DS-380328 - - - - - 341/4” 299.95Gambler DS-380332 DS-380331 DS-380330 7807-00801 DS-3806152 - 34” 314.95Longshot DS-380357 DS-380358 DS-380359 - DS-3806182 - 421/2” 314.95Midway DS-380470 - - - - - 375/8” 324.95Pro Street - 1401-0003 1401-0004 - - - 31” 338.95FOR RIGID FRAMES2000R (left-side drive) - - - - DS-380309 - 371/2” 349.952000R-RSD (right-side drive) - - - - - 1401-0110 371/2” 384.959000R (left-side drive) DS-380624 DS-380625 DS-380621 - - - 371/2” 349.951 SUG. RETAIL $394.95.2 SUG. RETAIL $359.95.

CUSTOM REAR FENDERS•Heavy-gauge steel construction; available in seven popular widths•Swingarm fender features wiring tubes•Each fender is inspected personally by a master fender builder to ensure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork

•Fenders come undrilled so you can position them to look and work best for your application•Handmade in the U.S.A.

9000R Left side

Midway

Pro Street

2000R

Maverick Gambler Longshot

DusterCruiserRacer


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

1000

PART # DESCRIPTION SUG. RETAILFOR CUSTOM APPLICATIONSDS-380486 9” wide $589.95

PART # DESCRIPTION SUG. RETAILFOR CUSTOM APPLICATIONS (CONT)DS-380487 11” wide $589.95

CUSTOM STRUTLESS PRO-STREET REAR FENDERS•Internal strut design eliminates external struts•Heavy-gauge steel construction ensures strength, straightness and a flawless finish

•Inspected personally by a master fender builder•Available without taillight•For custom applications only (not recommended for OEM frames)


NOTE: Requires welding a mounting plate (included) to the frame before installing the fender.

PART # DESCRIPTION SUG. RETAILFOR 00-05 FXST/FLST1401-0163 Longshot $614.951401-0134 Pro Street 594.951401-0136 Pro Street w/taillight and license plate kit 954.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 FXST/FLST1401-0135 Pro Street $594.95

STRUTLESS REAR FENDERS•Internal strut design eliminates external struts•Heavy-gauge steel construction, 9” wide, ensures strength and a flawless finish•Available with or without taillight•Requires the removal of stock framehorns•Made in the U.S.A.

NOTE: Fenders have cut-out for electrical box.


RETAILFOR 06-10 FXST MODELS (WITH 200 TIRE)1401-0176 91/2” W fender only $338.951401-0285 91/2” W Long fender only 338.951401-0177 91/2” W fender w/ taillight and license plate kit 649.95


RETAILFOR 06-10 FXST MODELS (WITH 200 TIRE) (CONT)1401-0286 91/2” W Long fender w/ taillight and license plate kit $649.95FOR 97-08 FLT, FLHT, FLHR, FLTR MODELS (WITH 180 TIRE)1401-0240 81/4” W fender only 409.95

OEM-STYLE REAR FENDERS•Heavy-gauge steel construction•Predrilled; no spacers required•Softail fenders available in standard and Long styles; feature flat mounting surface for the electronic panel; also available with RWD LED Cat Eye/License Plate/Turn Signal Kit recessed into fender


PART # DESCRIPTION SUG. RETAILFOR 85 FX (EXCEPT FXWG, FXST AND FXR)DS-380032 Quickbob fender $99.95DS-270120 Chrome taillight/

license plate bracket only 45.95

CUSTOM QUICKBOB® REAR FENDER•Wide Glide-style with a raw steel finish•Accepts stock fender struts and hardware•Optional chrome license/taillight bracket, sold separately

DS-380486DS-380487

1401-0163 1401-0134

1401-0136

1401-0176

1401-0177

1401-0240

DS-380032 DS-270120

1401-0285


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

1001

PART # DESCRIPTION SUG. RETAILDS-393496 For left-hand chain $81.95DS-393497 For right-hand chain 81.95

FAT BOB-STYLE REAR FENDERS•Universal custom fenders with left-hand or right-hand chain cutaway•Each measures 38” L x 7” W x 51/2” D and has a raw steel finish

PART # DESCRIPTION SUG. RETAILDS-380043 For 85 FX models

(except FXWG, FXR and FXST) $82.95

REAR FENDER•Uses stock mounts and has a raw steel finish•Original-style fender with taillight mounting holes

PART # DESCRIPTION SUG. RETAILFOR 86-97 FLST/FLSTC MODELSDS-380058 Stock-style fender; repl. OEM #59144-87A $129.95DS-380067 Smooth-style fender 129.95

REAR FENDERS•Steel construction•Available in a smooth style with no taillight mount/license plate mount holes or a stock style with taillight/license plate mount holes

•Fender-mounting holes are drilled for easy installation•Also fits FXST models if a full fender is desired

PART # DESCRIPTION SUG. RETAILDS-380064 For 84-96 FXST models; repl. OEM #59914-86A $92.95

REAR FENDER•Steel construction•Pre-drilled for easy installation and accepts the OEM taillight assembly or Drag Specialties taillight assembly PART #DS-272026

•Direct replacement for stock rear fender•Measures approximately 71/4” wide PART # DESCRIPTION SUG. RETAIL

1401-0256 For 06-10 FXST, FXSTB, FXSTS, FXSTC, FLSTSB; repl. OEM #59914-06 $189.95

REAR FENDER•Raw, stamped-steel construction•Pre-drilled for easy installation and accepts all the OEM components and taillight assembly

•Direct replacement for stock rear fender•Measures approximately 9-1/2” wide

PART # DESCRIPTION SUG. RETAIL1401-0272 For 04-10 XL; repl. OEM #59847-04, 59673-04 $135.95

REAR FENDER•Raw steel finish•Includes fender support and two wire retention brackets

DS-393496

DS-393497

DS-380058

DS-380067

PART # DSECRIPTION SUG. RETAILDS-380068 For 90-95 FLSTF; repl.

OEM #59596-89 $122.95

REAR FENDER•An exact steel replacement for the fender found on 90-95 FLSTF models


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

1002

PART # DESCRIPTION SUG. RETAIL1401-0041 OEM pre-drilled for 94-03 XL models $149.951401-0042 Custom undrilled for 94-03 XL models 149.95

FAT BOB REAR FENDER•Raw steel finish, approx. 6” wide on the inside

•Available pre-drilled for OEM fender struts or undrilled for custom applications

•Includes taillight/license mount

PART # DESCRIPTION SUG. RETAILDS-393500 6” flat rear

fender, bobbed $59.95

6” FLAT REAR FENDER•16-gauge, deep-drawn steel with a raw finish

•Each is 41” L x 11/4” D•Fender bracket not included

PART # DESCRIPTION SUG. RETAILDS-380125 7 1/2” wide $60.95DS-380126 8 1/2” wide 60.95DS-380128 9” wide 60.951925-2610 10” wide 60.95

STEEL FLAT FENDERS•Heavy 16-gauge steel construction, 42” long•Available in 71/2”, 81/2”, 9” and 10” widths•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1401-0045 For 02-06 VRSCA/B/D $359.95

FAT ROD REAR FENDER•Fiberglass construction•Features a recess for Cycle Visions’ Eliminator taillight assembly (PART #2010-0007), not included

•Matching front fender (PART #1401-0044), available separately


PART # DESCRIPTION SUG. RETAILDS-380261 71/2” W $239.95

LEGACY™ REAR FENDER•Dynamic fiberglass fender from Arlen Ness

•Measures approximately 4” longer than the stock FLSTC fender at the rear and has longer skirting for a dressy look

•Perfect match to the Legacy™ front fender PART #DS-380263


NOTE: Fenders may vary up to 1/4” in width.PART # DESCRIPTION SUG. RETAILDS-380250 For FXR and Softail, 7” W $224.95DS-380251 For custom applications, 8” W 224.95DS-380252 For custom applications, 81/2” W 224.95

TRIMMED TAILDRAGGER™ REAR FENDERS•One of the most popular and recognized fiberglass fenders of the ‘90s•Available in two different widths for custom applications•Made in the U.S.A.

NOTE: Fenders may vary up to 1/4” in width.

1401-0041

1401-0042

DS-380125

DS-380250 DS-380252


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

1003

PART # DESCRIPTION SUG. RETAIL1401-0293 For 09-10 FLHT/FLHR/FLTR/FLHX $1,374.95

CHUPA FRENCHED SMOOTH REAR FENDER KIT•Transform the look of your bike with this complete kit

•Requires no modifications to install, truly a bolt-on one piece custom fender

•8” stretch fender is made from high-pressure composite and hand-finished

•Steel plate formed into each fender for custom seat mounting

•Wedgy Bag lights are frenched in to each filler panel; lights have run/brake/turn functions

•License plate is frenched in and lit with a hidden LED light

•Complete kit includes 8” stretched fender, two Wedgy lights and chrome stealth license plate frame with LED license light


PART # DESCRIPTION SUG. RETAIL1401-0294 For 09-10 FLHT/FLHR/FLTR/FLHX $714.95

CHUPA SMOOTH REAR FENDER•A true bolt-on custom fender; requires no modifications to install

•8” stretch rear fender features 3D side wall filler panels for a wild look

•Fender is made from high-pressure composite and finished by hand

•Steel plate formed into fender for custom seat mounting


PART # DESCRIPTION SUG. RETAILDS-380479 71/4” Loboy $228.95DS-380482 9” Loboy 242.95DS-380476 71/4” Loboy StreetSweeper 283.95

PART # DESCRIPTION SUG. RETAILDS-380478 9” Loboy StreetSweeper $321.958620 71/4” StreetSweeper 387.95

UNIVERSAL REAR FENDERS•Made from space-age materials that are lighter and stronger than fiberglass

•Not pre-drilled — you can position them wherever you want•Glassed-in convoluted tubing makes it simple and easy to wire the taillight

•Ready for primer and paint with minimal preparation•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 97-05 FLT MODELS1401-0179 71/4” Loboy Sweeper $285.95FOR 00-05 FXST AND 00-09 FLST MODELS (EXCEPT FXSTD, 07-09 FLSTF)1401-0022 71/4” Loboy Sweeper w/ ECM cutout 285.951401-0020 71/4” Loboy Classic w/ ECM cutout 232.951401-0018 71/4” StreetSweeper w/ ECM cutout 354.951401-0023 71/4” Dominator w/ ECM cutout 193.95

PART # DESCRIPTION SUG. RETAILFOR 91-01 DYNA MODELSDS-380480 63/4” Loboy $234.95FOR 94-03 XL MODELSDS-380481 63/4” Loboy 228.95

MODEL-SPECIFIC CUSTOM REAR FENDERS•Made from space-age materials that are lighter and stronger than fiberglass

•Not predrilled — you can position them wherever you want•Glassed-in convoluted tubing makes it simple and easy to wire the taillight

•Ready for primer and paint with minimal preparation•Made in the U.S.A.

DS-380479

DS-380476

8620

1401-0179

1401-0022

1401-0020

1401-0018

1401-0023

DS-380481

DS-380480


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

1004


RETAILFOR SWINGARM FRAMES1401-0140 9” wide $269.951401-0141 11” wide 269.95


RETAILFOR SWINGARM FRAMES (CONT)1401-0142 13” wide; 143/4” radius $339.951401-0241 13” wide; 16” radius 319.95


RETAILFOR RIGID FRAMES1401-0143 11” wide $294.951401-0144 13” wide 339.95

CUSTOM REAR FENDER BLANKS•Heavy-gauge steel construction•Available in three widths•Large enough to cut out custom style•Handmade in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-240093 For 84-99 FXST/

FLST models $33.95

REAR FENDER ROCK GUARD•Made from high-quality stainless steel•Available in a polished finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1925-2611 5” x 12” $52.951925-2612 63/16” x 12” 66.95

PART # DESCRIPTION SUG. RETAIL1925-2613 93/8” x 12” $77.95

POLISHED ALUMINUM SWINGARM ROCK GUARDS•Available in three widths: 5”, 63/16” and 93/8”

•Measure 12” long•Fit most aftermarket Softail-style swingarm frames


STOCK-STYLE FENDER STRUTS

PART # DESCRIPTION SUG. RETAILCHROME1411-0017 For 00-07 FLSTC/S, 07 FLSTN; repl. OEM #S 59954-03, 59955-03 $114.951411-0024 For 06-07 FXST (except FXSTD) 124.951411-0016 For 00-05 FXST (except FXSTD), 05-06 FLSTN, 00-06 FLSTF;

repl. OEM #s 59964-03, 59969-03 114.95DS-264049 4-hole for 86-99 FXST/FLST w/o turn signals mounted to

fender struts; repl. OEM #s 59964-86, 59969-86 114.951411-0019 For 85-86 FXWG; repl. OEM #59961-80, 59960-80 79.95DS-264052 For 85 FX; repl. OEM #59928-73, 59686-78 79.951411-0020 For 04-10 XL 79.951925-6989 For 94-03 XL; repl. OEM #59896-94, 59897-94 56.95DS-264072 For 86-89 XL; repl. OEM #59950-81 79.95RAW1411-0021 For 00-05 FXST (except FXSTD), 05-06 FLSTN, 00-06 FLSTF;

repl. OEM #s 59964-03, 59969-03 99.951411-0022 For 00-07 FLSTC/S, 07 FLSTN; repl. OEM #S 59954-03, 59955-03 99.951411-0026 For 06-07 FXST (except FXSTD); repl. OEM #60143-06A, 60146-06A 99.95

SMOOTH CUSTOM FENDER STRUTS

PART # DESCRIPTION SUG. RETAILCHROME1411-0025 For 06-07 FXST (except FXSTD) $124.951411-0018 For 00-05 FXST/FLST 114.95DS-264071 For 86-99 FXST/FLST 109.95DS-264057 For 85-86 FXWG 79.95DS-264055 For 85 FX 79.95RAW1411-0027 For 06-07 FXST (except FXSTD) 99.951411-0023 For 00-05 FXST/FLST 99.95

REPLACEMENT REAR FENDER STRUTS•Beautifully chromed or raw finish rear fender struts; available in a smooth or stock replacement style; sold in pairs

DS-264052

DS-264071

DS-264055

1925-6989

DS-264072

1411-0020

DS-264057

DS-264049

1401-01401401-0141 1401-0142

1401-0143 1401-0144

1411-0024

1925-26111925-2612

1925-2613

1411-0025


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

1005

PART # DESCRIPTION SUG. RETAILDS-264003 Fat Guy curved billet struts for 81/2” - 9” fenders $379.95

CURVED BILLET FENDER STRUTS•For Chopper Guys FXST/FLST-style frames without OEM-style strut mounts

•5/8” solid raw steel; studs and nuts included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 81/2” - 9” FENDERSDS-264006 Lowered (2”) fender struts $379.95DS-264007 Stock-style fender struts 379.95

STEEL FENDER STRUTS•Designed for custom Softail frames without OEM-style strut mounts

•Made from 1/2” thick cold-rolled raw steel with 17/8” offset

•Supplied with bushings for either 3/8” or 1/2” mounting holes

•Available in stock height or 2” lower height•Made in the U.S.A.

NOTE: 2” lower fender rails may change seat-to-fender contour.

PART # DESCRIPTION SUG. RETAIL1411-0033 For 87-94, 99-00 FXR models $399.95

REAR FENDER STRUTS•Made from billet aluminum with a machine finish

•For stock or custom FXR frames


PART # DESCRIPTION SUG. RETAIL1413-0010 Rigid fender struts $124.95

PART # DESCRIPTION SUG. RETAILDS-111205 Rigid fender

supports (pr.) $122.951411-0015 Bones Rigid

fender struts (pr.) 132.95

RIGID FENDERSUPPORTS•For Chopper Guys 250mm Rigid frames and other custom applications

•Bolt-on style with fender mounting holes•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT, FLHT1405-0117 Chrome $39.951405-0118 Flame $42.95

FRONT FENDER SKIRTS•Steel construction, polished and chrome plated

•Available in plain chrome or flame style


RETAILDS-189800 Button-head

fender rail kit $16.95

BUTTON-HEAD FENDER RAIL BOLT KIT•Used for mounting fender rails to Chopper Guys Softail-style frames

•Kit includes six 1/2”-13 x 1” button-head bolts and six A/N washers


PART # DESCRIPTION SUG. RETAILDS-190890 For 85 FX $18.95

FENDER RAIL MOUNTING KIT•Comes complete with chrome bolts, nuts and acorns

PART # DESCRIPTION SUG. RETAILDS-190935 For 84-99 FXST models $65.95

CUSTOM FENDER STRUT MOUNTING KIT•Pasties kit for mounting fender to struts

•Includes chrome socket head bolts, special nuts, flat washers, wrench and Pasties, 6061 billet aluminum chrome covers


PART # DESCRIPTION SUG. RETAIL2030-0360 For 08-10

Buell 1125R $68.95

SUPERSPORT REAR FENDER KIT•The simplest way to rid your bike of the bulky rear fender assembly

•Bolt-on installation•Kits utilize stock turn signals•Manufactured from lightweight 5052 aluminum plate that is precisely bent to exacting tolerances

•Up to 1 lb. lighter than stock•Give your machine that “tail-high” style of a true AMA Supersport racebike

•Satin black powdercoat finish for lasting beauty


PART # DESCRIPTION SUG. RETAILDS-380094 For 87-10 FLT and FLHT; repl. the satin-finished

aluminum OEM trim #s 59233-76, 59231-86 $24.95

CHROME LOWER FRONT FENDER TRIM•Perfectly matches the contour of the OEM front fenders

•Highly polished and chrome plated

•Includes mounting hardware

DUAL SUPPORT RIGID FENDER STRUTS•Triangulated and attaches to frame with bung for additional strength•Features a built-in belt guard•Designed for custom rigid frames with 130-240mm tires


DS-111205

1411-0015

DS-264006

DS-264007

1405-0117

1405-0118


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 17

1006

PART # DESCRIPTION SUG. RETAILFOR FLHR, FLHX, FLTR, FLHRSE AND FLHTCUSE (EXCEPT 07 FLHRSE)1405-0103 Rear fender accent (except 09-10 models) $32.951405-0104 Front fender accent (leading edge) 32.95

FENDER TIP ACCENTS•Chrome complement to the clean fender look on the Touring models

•Quick, simple installation with double-sided adhesive

•Sold each

NOTE: Not for use on models with existing fender trim.

INNER FENDER ACCENT•Stamped steel insert is chrome-plated•Covers up the plain black inner fender/splash guard•Installs easily with double-sided adhesive•Sold each or in pairs depending on application, see chart

PART # DESCRIPTION SUG. RETAIL1405-0094 For 00-05 FXST, 00-06 FLST

(except 04 FXSTDSE, FLSTFSE) (pr.) $104.951405-0101 For 07 FXSTD, FLSTN, FLSTC, FXSTS (ea.) 59.951405-0102 For 08-10 FXST/FLST models 119.95

FENDER TIPS•Great way to cover dinged fender ends•Easy installation: requires no drilling or tools•Fit most OEM fenders

NOTE: Tip for narrow tire fender will not fit “full coverage” or skirted fenders.

PART # DESCRIPTION SUG. RETAIL1412-0001 Narrow tire front fender (leading edge) $29.951412-0002 FLSTF front fender (leading edge) 29.951412-0003 FLSTF front fender (trailing edge) 29.951412-0004 FLSTF rear fender 29.95

1405-0103

1412-0001 1412-0004

1405-0104

1405-0094 1405-0101 1405-0102

WILD BOAR FENDER ORNAMENT•Make a real statement with this fender ornament

•Features illuminating red eyes•Two-piece construction allows easy installation and bulb replacement•Requires 12V power source•Fits most any fenderPART # DESCRIPTION SUG. RETAILDS-111220 Wild boar fender ornament $49.95

EAGLE HEAD FRONT FENDER ORNAMENTS•Die-cast eagle fender ornaments in two different sizes

•Small measures approximately 11/2” tall; large is approximately 21/2” tall•Available as all-chrome or chrome with gold beak, plus some with eyes that light up•Fit most front fenders; include gasket and mounting hardware•Sold individually


RETAILDS-287556 Small chrome eagle head (gold eyes) $23.95DS-287555 Small chrome eagle head w/ lights (red eyes) 27.95DS-287554 Repl. bulb w/ wires for DS-287555 2.35DS-287553 Large chrome eagle head w/ lights (amber eyes) 52.95DS-287552 Large chrome/gold eagle head w/ lights (amber eyes) 65.95A72-BP Repl. bulb for DS-287553/552 1.95

SKULL HEAD FRONT FENDER ORNAMENTS•Unique skull head ornaments available with or without illuminated eyes

•Fit most front fenders

PART # DESCRIPTION SUG. RETAILDS-287531 Skull head fender ornament $33.95DS-287533 Skull head w/ illuminated eyes, chrome 32.95DS-287554 Repl. bulb w/ wires for DS-287533 2.35

PART # DESCRIPTION SUG. RETAILFOR 84-08 FLT MODELS; REPL. OEM #91140-98/041421-0005 Chrome $54.951421-0006 Black 39.95

SADDLEBAG-TO-FENDER SUPPORT BRACKET•Bracket eliminates unsightly OEM bracket on FLTR/FLHRCI/FLHRS models•Can be used when removing rear bumper and rail on FLT/FLHT models•Installs easily using OEM hardware•Made in the U.S.A.

DELUXE REAR MUD FLAP WITH LIGHTS•Injection-molded with a chrome-plated, steel light backing plate insert, chrome mounting strip and two mini Baron® Custom Accents marking lights

•Grilles sold separately

NOTE: Will fit with trailer hitch PART #DS-720554.PART # DESCRIPTION SUG. RETAILDS-393740 Mud flap w/ lights $84.95DS-719974 Lens grilles (pr.) 11.95

7808-1080

1420-00451420-0046

DS-393703

DS-393760 DS-393698

DS-393701DS-393702

7808-1079MUD FLAPS•Constructed of durable 1/8” rubber•Available in a variety of styles•Include mounting hardware•Made in the U.S.A.


RETAIL91/2” W X 61/2” H7808-1080 Studded w/ conchos $21.95DS-393704 Studded w/ diamond center 20.95DS-393703 Studded w/ plain center 17.95DS-3937601 Studded w/ reflectors

and fringe 31.95


RETAIL91/2” W X 61/2” H (CONT)DS-393702 Plain $9.951420-0045 POW-MIA 14.95101/2” W X 8” H7808-1079 Studded w/ conchos 23.95DS-393698 Studded w/ diamond center 19.95


RETAIL101/2” W X 8” H (CONT)DS-393701 Plain $12.951420-0046 POW-MIA 19.951 Nylon-reinforced rubber.

DS-393704

DS-287553

DS-287552

DS-287556

DS-287555

DS-393740

1421-0005 1421-0006

DS-287531

17 frames, suspension & fenders (chassis, suspension et pare-boue) 2010

Documents