18 november 2002 - international islamic university malaysiastaff.iium.edu.my/mmyali/?download=cv...

Curriculum Vitae

Professor Dr. Mohammad Yeakub Ali PhD. (NTU), MEng (AIT), BSc Eng (BUET) P Eng. (Bangladesh), C Eng, (UK), CP Eng, (Australia) FIEB, FBSME, MIMechE, MIEAust, MASME, MEUSPEN, MIEM

Department of Manufacturing and Materials Engineering Faculty of Engineering, International Islamic University Malaysia PO Box 10, 50728 Kuala Lumpur, Malaysia Tel.: (603) 6196 4507, E-mail: [email protected] HP: (6) 01116673525, E-mail: [email protected] http://staff.iium.edu.my/mmyali/

Summary

Education: PhD. 2002, NTU, Singapore MEng 1997, AIT, Thailand BSc Eng 1992, BUET, Bangladesh Postgraduate Diploma (Islamic Revealed Knowledge) 2007, IIUM, Malaysia

Experience: Professor, IIUM, Malaysia 5 years (Oct 2011-Present) Associate Professor, IIUM, Malaysia 4 years Assistant Professor, IIUM, Malaysia 3 years Assistant Professor, DUET, Bangladesh 1 year Lecturer, DUET, Bangladesh 3 years Research Fellow, NTU, Singapore 2 years Research Associate, NTU, Singapore 1 year Mechanical Engineer, ProTech, Bangladesh 1 year

Supervision (Completed and Ongoing): PhD. M.Eng. UG FYP UG Seminar Supervision 15 14 ~70 ~30 Examiner 08 10 ~100 ~40 Comprehensive Examination 15 02 -- -- Total 38 26 -- --

Research Funding (2002-2016): Principal Researcher (RM) 700,000 Co-Researcher (RM) 1,200,000 Research Fellow (S$) 5,800,000

Publication (2000-2016) International Citation Indexed ISI Scopus Google Scholar Non-Indexed Total Journal 24 60 16 100 Conference Proceedings -- -- 33 01 34 Book Chapter -- 02 05 16 23 Book -- -- -- 06 06 Conference Presentation (Paper Published in Journal)

-- -- -- 33 33

Invited/Keynote Speech -- -- -- 14 14 Poster -- -- -- 08 08 Newsletter -- -- -- 04 04 Research Report -- -- -- 10 10 Thesis/Dissertation -- -- -- 03 03 Patent (Filed) -- -- -- 01 01 Total 24 62 53 96 236

Citation (2000-2016): Number of Paper Thomson Reuters: 21 Scopus: 76 Google Scholar: 173 Number of Cited Paper Thomson Reuters: 21 Scopus: 45 Google Scholar: 75 Number of Citation Thomson Reuters: 189 Scopus: 303 Google Scholar: 627 h-index Thomson Reuters: 9 Scopus: 11 Google Scholar: 15 i10 = 21 Database ID Scopus: 55348433600 ORCID: 0000-0002-1580-033X Researcher: J-3343-2014

of 23

mailto:[email protected]

http://www.researcherid.com/rid/J-3343-2014

Curriculum vitae Professor Dr. Mohammad YEAKUB Ali

Education:

PhD. in Mechanical Engineering (2002) Sponsor: Govt. of Singapore Nanyang Technological University (NTU), Singapore Specialization: Precision Engineering, Micromanufacturing, Focused Ion Beam (FIB). Courses: Advanced Metrology and Sensing Systems, Nanofabrication, Research Methodology, etc.

Thesis Title: Ion Beam Micromachining of Crystalline Solids Focused ion beam (FIB) shape was characterized and then mathematical models to predict the surface finish

from FIB parameters and material properties were derived. The resulting surface finish of FIB sputtered silicon wafer was studied. The calculated surface roughness was compared with the measured data. An application of the study to produce microcavity for mass production of microcomponents was made with sub-micrometer accuracy and nanometric levelled surface finish. Using the FIB sputtered microcavities, three-dimensional microcomponents e.g., microgears, gear-trains, etc. have been replicated from high density polyethylene by microinjection molding. The overall sizes of these replicated microcomponents were within few tens to few hundreds micrometers. This research works have been published in several international refereed journals.

M. Eng. in Manufacturing Systems Engineering (1997) Sponsor: DAAD, Germany Asian Institute of Technology (AIT), Bangkok, Thailand Specialization: Advanced Manufacturing Processes Courses: Advanced Manufacturing, CAD/CAM/CIM, CNC, Production Management, Project Management, Production Planning and Control, Material Handling Systems, Scheduling and Sequencing, etc…

Thesis Title: Development of Knowledge Base for Stretch Blow Molding Domain knowledge was studied and collected from experts and then organized to develop a knowledge base

for PET stretch blow molding e.g., Coca-Cola bottle, etc. The knowledge base includes PET container design, fabrication processes, troubleshooting, etc.

BSc. Eng. in Mechanical Engineering (1992) Sponsor: Govt. of Bangladesh Bangladesh University of Engineering and Technology (BUET), Dhaka Specialization: Mechanical Engineering, Industrial Production Engineering

Thesis Title: Recycling of Waste Plastic Products Statistical data for the various types of waste plastic products in Dhaka city was collected. Then a low-cost

recycling of waste plastic products was proposed to recycle and fabricate various household plastic products.

Postgraduate Diploma in Islamic Revealed Knowledge (2007) Sponsor: IIUM International Islamic University Malaysia Experience:

04 Oct 2011-Present: Professor 26 Mar 2007-03 Oct 2011 : Associate Professor 15 Jun 2004-25 Mar 2007 : Assistant Professor Department of Manufacturing and Materials Engineering Faculty of Engineering, International Islamic University Malaysia

03 Jun 2002– 19 May 2004: Research Fellow 11 Oct 2001– 02 Jun 2002: Research Associate School of Mechanical and Aerospace Engineering Nanyang Technological University, Singapore

15 July 2001-10 Oct 2001: Assistant Professor 20 Sep 1993-30 Apr 1996: Lecturer Mechanical Engineering Department Dhaka University of Engineering and Technology (DUET), Bangladesh

2000-2001: Teaching Assistant School of Mechanical and Aerospace Engineering Nanyang Technological University, Singapore

1997-1997: Teaching Assistant Department of Mechanical Engineering Sirindhorn International Institute of Technology, Thailand

15 Sep 1992-20 Sep 1993: Mechanical Engineer (Process Planning) ProTech Engineering, Dhaka, Bangladesh

of 23


Administration:

Department/Office/Task (Selected) Position Duration 1 Department of Manufacturing and Materials Engineering Head (Chairman) 2012-2016 2 Accreditation Committee for Manufacturing Engineering Programme Chairman 2016 3 Accreditation Committee for Materials Engineering Programme Chairman 2016 4 Undergraduate Curriculum Review Committee Chairman 2014-2015 5 Postgraduate Curriculum Review Committee Chairman 2014-2015

6 5S Implementation (5S: Sorting, Simplifying, Systematic Cleaning, Standardizing, Sustaining)

Chairman 2012-2016

7 Board of Studies: Bachelor of Engineering (Manufacturing) Dept. Chairman 2014-2016 8 Board of Studies: Bachelor of Engineering (Materials) Dept. Chairman 2014-2016 9 Board of Studies: Masters of Science (Manufacturing Engineering) Dept. Chairman 2014-2016

10 Board of Studies: Masters of Science (Materials Engineering) Dept. Chairman 2014-2016 11 Accreditation Committee: Manufacturing Engineering Programme Chairman 2012 12 Safety and Health Committee Representative 2012-2016 13 Academic Advisor: Manufacturing Engineering Chairman 2010-2011 14 Course Co-ordinator: Manufacturing Engineering Chairman 2005-2012 15 Precision Manufacturing Engineering Research Unit Secretary 2004-2008

Course Taught:

Bachelor of Engineering (Manufacturing) Master of Science (Manufacturing Engineering) Engineering Drawing Workshop Technology Mechanics of Materials Lab Manufacturing Engineering Lab I Manufacturing Engineering Lab II Processing of Non-metallic Materials Design of Machine Components Micromanufacturing Technology Engineering Mechanics Mechanics of Solids Thermofluid Engineering Metallurgical Engineering Refrigeration and Air Conditioning

Special Topics in Advanced Manufacturing Micro-Meso Manufacturing Advanced Manufacturing Process Bulk Deformation and Net Shape Manufacturing

Student Feedback Score: Average 86%

New Course Developed: Bachelor of Engineering (Manufacturing) Master of Science (Manufacturing Engineering) Engineering Drawing Processing of Nonmetallic Materials Design of Machine Components Micromanufacturing Technology Processing of Plastics

Special Topics in Advanced Manufacturing Micro-Meso Manufacturing Production Scheduling and Sequencing Bulk Deformation and Net Shape Manufacturing

Postgraduate Supervision:

Student Name Title Level Status

1 Norfazzial Binti Omar (G1514870)

Vibration Control in Micro End Milling with Minimum Quantity Lubrication

PhD In progress

2 Asfana Banu Asharaf (G1529732)

Investigation of Kerf in Micro Wire Electro Discharge Machining with Dry Dielectric Fluid PhD In progress

3 Mst. Nasima Bagum (G1413320)

Machinability Analysis towards development of Analytical Model for High speed Ductile Mode Machining of soda lime Glass

PhD In progress

4 Saud F E M D Alazemi (G1429627)

Rotary Hammer Forging Combined with Metal Alloys PhD In progress

of 23


Student Name Title Level Status

5 Talal S F F A Alazemi (G1420859)

Effect of Surface crack and Its Size on Mechanical Characteristics of Gold Nano-wire

PhD In progress

6 Yahya A A A Alazemi (G1420403)

Relating Product Manufacturing Decision to Environmental and Cost Performance using CAPP

PhD In progress

7 Musa Mohamed H. Abdulrahman (G1210569)

Fracture Behavior Characterization and Evaluation of API 5L X80 Pipeline Steel

PhD In progress

8 Zakaria Mohd Zain (G0821705)

Surface Modification of Stainless Steel using EDM with TaC, WC and SiC Powder Compacted Electrode

PhD In progress

9 Md Alal Hosen (G1324065)

Analytical Study of Nonlinear Oscilatory Problems in Dynamic System

PhD In progress

10 Adebisi Adetayo Abdulmumin (G1218291)

Tribo-Mechanical and Performance Stability of Hybrid Stir Cast Composite Brake Rotor

PhD Completed

11 Abu Naim Muhammad Abdus Sabur (G1034005)

Theoretical Modelling of Process Performance in Micro Electro Discharge Machining for Nonconductive Ceramic Materials

PhD Completed

12 Mohamed Baba Ndalim (G1019923)

Surface Modification using P/M Compacted Electrodes during Electrical Discharge Machining

PhD Completed

13 Umma Abdullahi (G1121434)

Development and Characterization of Carbon Nanotube-Aluminium Nano-Composite for Brake Disc Application

PhD Completed

14 Mohd Amri Lajis (G0526829)

Preheated Machining of Hardened Steel AISID2 and Optimization of Parameters

PhD Completed

15 Mohammed Anayet Ullah Patwari (G0626699)

Investigation of the Cause of Chatter in Machine Tools and Development of an Appropriate Chatter Model PhD Completed

16 Turnad Lenggo Ginta (G0819587)

Machinability of Titanium Alloys Through Workpiece Preheating (Post Viva Supervision) PhD Completed

17 Ebrahim Abdullah Hasan Hanash (G1513151)

Experimental Study of Vibration in Micromilling MEng In progress

18 Syarlina Syazliza Binti Saaid (G1015538)

Optimization of Process Parameters on the Hardness and Impact Strength of Aluminium Alloy Sand Casting by Using Taguchi Method

MEng In progress

19 Mazilah Binti Abu Bakar (G1014104)

Investigation of Optimum Wire Electrical Discharge Machining Parameters for Cutting Titanium Alloy

MEng In progress

20 Norzelah Zainuddin (G1313380)

Inference for Cox Proportional Hazard Model via a New Version of Empirical Likelihood Based on Partly Interval Censored

MEng In progress

21 Nurul Akmar Binti Mohd Fauzi (G1319856)

Six Sigma Quality Control in Automotive Industry MEng In progress

22 Meshal R. E. E. M. Aldousari (G1213107)

Study of a Coal Based Power Plant and Its Economic Aspect

MEng Completed

23 A. H. M. Abdul Moudood (G1214215)

Material Removal Rate and Surface Roughness in Electrical Discharge Machining of Alumina

MEng Completed

24 Asfana Banu Binti Mohamad Asharaf (G1117058)

Analysis of Material Removal Rate and Recast Layer in Micro EDM of Non-Conductive Zirconia

MEng Completed

25 Nur Atiqah Binti Abdul Rahman Azmil (G1020410)

Modelling of Vibration on System Parameter for High Speed Micro End Milling of PMMA

MEng Completed

26 Ahmed Salem A. AL-Ghamdi (G0912677)

Development and Investigation of Reinforced High Impact Polystyrene Nanocomposites

MEng Completed

27 Nurul Hajar Bt Mohd Fuad (G0722154)

Effect of Focused Ion Beam Machining Parameters on Geometrical Accuracy of Bio-MEMS

MEng Completed

28 Reyad Mehfuz (G0525237)

Micro Electro Discharge Milling for Microfabrication MEng Completed

29 Ammar Sami Mohammad (G0325123)

Development of Micro Hot Embossing Process MEng Completed

30 Belal Ahmed (G11117483) Tribo-corrosion Behavior of TiC Coated AISI 4340 Steel in Jatropha Biodiesel

MEng Completed

31 ~70 students Topics on Machining, Micromachining, Microforming, Manufacturing

FYP Completed

of 23


Undergraduate Project (Selected 10)

Final Year Project 1. Finish Cut of Titanium Alloy using Micro Electro Discharge Milling for Nano Surface Finish 2. Investigation of Burr Formation in High Speed Micromilling 3. Characterization of Micro-holes Produced by Micro-EDM 4. Microfabrication using Micro-EDM 5. Micromilling of Metallic Materials for Microsystems Technology 6. Fabrication of Prismatic Microcomponents by Hot Embossing 7. Development of Prototype Micro Hot Embossing Setup

Integrated Design Project 8. Tomato Size Grader 9. Remote Air Leak Detector 10. Design of Mist Coolant System

Examiner for Thesis/Dissertation:

Thesis Title University Level Year

1 Machining Investigation of Medium Density Fiberboard Universiti Teknologi Malaysia

PhD 2016

2 Development of an Accuracy Control System in Shipbuilding

Anna University, India. PhD 2016

3 Modeling and Optimization of Process Parameters in Microturning of Inonel 600 Alloy

Anna University, India. PhD 2015

4 A facile, cost effective, patterned ZnO microwires synthesis for large-scale fabrication of piezoelectric-generator

Asian Institute of Technology, Thailand

PhD 2015

5 Finite Element Analysis and Experimental Validation of Incremental Sheet Metal Forming Process on CNC Machines

International Islamic University Malaysia

PhD 2013

6 Service Quality and Reliability Assessment of Mobile Communication Infrastructure

Cochin University of Science and Technology, India

PhD 2012

7 Significance of Control Chart for Reliability Analysis in Process Industries

Anna University of Technology, India

PhD 2012

8 Improved Machinability of Titanium Alloys Through Workpiece Preheating


PhD 2009

9 Improvement of Machining Performance for Steel Grade 760 using Magnetic Field Assisted Al2O3 Powder-Mixed EDM


MEng 2016

10 Enhanced Heating Mechanism for the Electric Metal Melting Furnace in Traditional Local Foundry


MEng 2015

11 Development of a New Chatter Control Method for Application in Turning


MEng 2015

12 An application of Six Sigma Approach to Improve the Painting Process in a Malaysian Vehicle Assembly Company


MEng 2014

13 The Effect of Current and Pulse Duration on Machining Performance during Electrical Discharge Machining (EDM) of AISI D2 Steel


MEng 2013

14 Investigation of Fundamental Properties of Nanorefrigerants

University of Malaya, Malaysia

MEng 2012

15 An Investigation of Backcutting Phenomena on Surface Roughness During High Speed End Milling Operation


MEng 2011

16 Preheating, Cryogenic Cooling and Combined Approach to Improve Machinability of Stainless Steel


MEng 2007

17 A Study of ISO 9000:2000/1994 Proton Vendors Industrial Business Performance: Financial Aspect


MEng 2006

18 The studies and Improvement of Ventilation System in the Paint Shop


MEng 2005

of 23


Examiner for Comprehensive Viva (Selected):

Title University Level Year

1 Design and Development of a Novel Stepped Waveform Generation for Modular Multilevel Inverter Application


PhD 2016

2 Machinability Analysis towards Development of Analytical Model for High Speed Ductile Model Machining for Brittle Materials


PhD 2015

3 Amorphous Silicon (a-Si) Based Thin Film Junctions For Stand-Alone Photovoltaic System


PhD 2015

4 Extended Enterprise Innovation Based Cloud Manufacturing International Islamic University Malaysia

PhD 2014

5 Prediction of Mould Growth in Hospital using Thermal Characteristics


PhD 2013

6 Development of Non-contact Near-Field Capacitive Proximity Sensing Technique for Human Movement Recognition


PhD 2013

7 Natural Corrosion Inhibitor for Keris Preservation International Islamic University Malaysia PhD 2013

8 Development of Durian Skin Fibre Nanocomposite via In-situ Polymerization of Lactic Acid

International Islamic University Malaysia PhD 2013

9 Characterization of Tribological Properties on TiC-BN Hybrid Composite Coated Low Alloy Steel


PhD 2013

10 A Multilayer Inverter with Integrated Conditioning Interface for Grid-Tied Renewable Energy System


PhD 2013

11 Correlation of Tool Path Strategy and Tool Engagement during High Speed End Milling


PhD 2013

12 Bioactive Ceramic Matrix Nanocomposites for High Performance Load Bearing Bone Substitute


PhD 2013

13 Novel Ultrasonic Soldering Process for Lap Joints of Typical Giftware Application


PhD 2013

14 Investigation of Chatter in Turning for Development of Analytical Model and Appropriate Chatter Control Methods


PhD 2012

15 Isolation and Microcapsulation of Fucoxanthin for Anticancer Study


PhD 2012

16 Implementation and Performance of Channelled Coolant Plate in Freshwater Production System


MEng 2015

17 Tribo-Corrosion of Coated Ti-Alloy in Biodiesel International Islamic University Malaysia

MEng 2015

FUNDED PROJECT:

Principal Researcher: Reference Status

1 Precision Control of Kerf in Micro wire Electro Discharge Machining With Dry Dielectric Fluid

03-01-08-SF01252 RM157000, 2015-2018

In progress

2 Noble Approach to Control Vibration using Minimum Quantity Lubrication (MQL) in MicroMilling

FRGS 14-156-0397 RM116700, 2014-2017

In progress

3 Wear Resistance Enhancement of Wind Turbine Blade Materials Under Sand Impact

FRGS 14-131-0372 RM66800, 2014-2016

In progress

4 Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid

03-01-08-SF0135 RM182875, 2012-2014

Completed

5 Noble Tool Based Micromilling For Nanometric Surface Finish FRGS 0207-44

RM96000, 2007-2010 Completed

6 Fabrication of Microcomponents by Micro Hot Embossing LT 35

RM24600, 2005-2007 Completed

7 Electrodischarge Machining of Nonconductive Ceramic Materials

EDW B11-085-0563 RM20,000, 2011-2013 Completed

8 Development of Micro-End Milling Process for Fabricating MEMS

IFRG 0701-06 RM15000, 2007-2009

Completed

9 Focused Ion Beam Machining for Nanopillar Sheet EDW B 0803-99 RM10000, 2008-2010

Completed

10 Powder Mixed Micro Electro Discharge Machining (PMµEDM) EDW A11-071-0862 Completed

of 23


RM5000, 2011-2012

11 Microdrilling of Metallic Materials for Microsystems Technology EDW 18 RM1500, 2006-2007

Completed

12 Geometrical Integrity of Micro-holes Produced by Micro-EDM EDW 17 RM1500, 2006-2007

Completed

Co-Researcher:

13 Prototype Development of Lighter Weight Aluminium Matrix Composite Automotive Brake Rotor

PRGS 12-002-0002 RM174000, 2012-2015

In progress

14 Developing a Real Time Localization System of Autonomous Robots in Flexible Manufacturing Systems for Indoor Production Environment

03-01-08-SF0253 RM129500, 2015-2017

In progress

15 Fundamental Study of Mechanical Behaviour of Aluminium Foam Sandwich in Structural Parts for Automotive

FRGS 15-247-0488 RM96200, 2015-2017

In progress

16 Scheduling and Reactive Rescheduling for Multi-Stage Multi-Product Batch Processing Industries

FRGS 11-031-0179 RM95000, 2011-2013

In progress

17 Investigation on Focused Ion Beam Micro/Nanomilling of Silicon for use as Mold Inserts in Micro/Nanoscale Injection Molding

EDW B11-081-0559 RM20000, 2011-2012

In progress

18 Modelling of Vibration and System Parameters for Stability in Micro End Milling: A Noble Approach

FRGS 12-074-0223, RM61500, 2012-2015

Completed

19 Characterization of Ceramic Materials after Machining by EDM EDW A11-140-0931

RM20000, 2011-2012 Completed

20 Characterization of Recast Layer Formed on Ceramic Materials Due to Electro Discharge Machining

EDW B11-125-0603 RM20000, 2011-2013

Completed

21 Surface Modification of Work Material using Powder Metallurgy (P/M) Compacted Electrode during Electrical Discharge Machining

EDW B 11-026-0504 RM20000, 2011-2013

Completed

22 Influence of Process Parameters on Material Removal Rate, Electrode wear, and Surface Integrity During EDM Milling

EDW B 0905-284 RM20000, 2009-2011

Completed

23 High Speed Machining of Aerospace Alloy- Ti6A1V and Inconel 781

IIUM RC 13 RM49000, 2007-2010

Completed

24 Improving the Performance of Electrical Discharge Machining (EDM) in Machining Titanium Alloys by using Cryogenic Cooling of Electrode

03-01-08-SF0062 RM90600, 2008-2010

Completed

25 Precise Micromachining with Electrical Discharge Machining (EDM) for Malaysian Industries

FRGS 0106-3 RM40000, 2007-2008

Completed

26 Development of New Diamond Layered Wheels for Ultra Precision Grinding

IRPA: UTM-IIUM RM100000, 2004-2006

Completed

27 Effect of Electrode Configuration on Electrode Wear during Electrical Discharge Machining (EDM)

EDW B 0701-13 RM9300, 2007-2009

Completed

28 Enhancement of Machinability of Hardened Steels in End Milling using Advanced Cutting Methods and Tools

03-01-08-SF0003 RM178750, 2006-2009

Completed

29 Precision Micro-Scaled Partial-Ductile Machining of Hard-Brittle Materials for Shortening Polishing Time

LT 37 RM26600, 2005-2007

Completed

30 Effect of Cryogenic Grinding on Surface Quality of Mild Steel and Stainless Steel

ST 93 RM11600, 2006-2007

Completed

Research Fellow (NTU, Singapore)

31 Focused Ion Beam Micromachining and Microreplication of Three-Dimensional Microcomponents

NTU-A*STAR, S$5.6m, 1998-2003

Completed

32 Micro-Nano Machining of Silicon and Non-Silicon Materials NTU-MIT Alliance

S$100000, 2003-2006 Completed

33 Micro-Nano Replication NTU-MIT Alliance

S$100000, 2003-2006 Completed

Organizing International Conference (Selected)

Conference Date Country Position

1 International Conference on Advances of Manufacturing and Materials Engineering (ICAMME)

2017 August

Malaysia Chairman

2 IIUM Engineering Congress (IEC) 2016

25-27 July Malaysia

Steering Committee

of 23


Conference Date Country Position

3 International Conference on Manufacturing and Materials Engineering (ICMME)

2015 25-27 Dec

Bangladesh Int’l Committee

4 International Postgraduate Conference on Engineering Research (IPCER)

2015 27-28 Oct

Malaysia Steering

Committee


2014 23-25 Sep

Malaysia Chairman:

6 Regional Tribology Conference (RTC) 2012

22-24 Nov Malaysia

Session Chairman


2012 3-6 July

Malaysia Technical Chairman

8 International Conference on Industrial Engineering and Operations Management (IEOM)

2012 03-06 July

Turkey Technical

Committee

9 International Conference on Manufacturing Science and Technology (ICMST)

2011 16-18 Sep

Singapore Session

Chairman


2011 22-24 Jan

Malaysia Session

Chairman


2010 9-10 Jan

Bangladesh Int’l

Committee

12 International Conference on Advances in Materials and Processing Technologies (AMPT)

2009 19-22 Oct

Malaysia Chairman

Publication

13 International Conference on Nanomanufacturing (nanoMan) 2008

13-16 July Singapore

Session Chairman

14 International Conference on MEMS and Nanotechnology (ICMN)

2008 13-15 May

Malaysia Member

15 International Conference on MEMS and Nanotechnology (ICMN)

2006 14-15 Mar

Malaysia Member

EDITORIAL BOARD/MEMBER/REVIEWER

Journal Name (Selected) Publisher Position

1 International Journal of Engineering Materials and Manufacture

Deer Hill Publications, Malaysia Editor-In-Chief

2 International Journal of Multidisciplinary Design, Analysis and Optimization A D Publication, India Editorial Board

3 The International Journal of Advanced Manufacturing Technology

Springer Reviewer

4 International Journal of Precision Engineering and Manufacturing

Springer Reviewer

5 Journal of Materials Processing Technology Elsevier Reviewer 6 Precision Engineering Elsevier Reviewer

7 Journal of Nanoengineering and Nanosystems Institute of Mechanical Engineer, UK Reviewer

8 Journal of Engineering Manufacture Institute of Mechanical Engineer, UK Reviewer

9 Review of Scientific Instruments American Institute of

Physics Reviewer

10 Materials and Manufacturing Process Taylor and Francis Reviewer 11 Machining Science and Technology Taylor and Francis Reviewer 12 International Journal of Mechanical and Materials Engineering University Malaya Reviewer 13 Journal of Ceramics Hindawi Reviewer

Professional Membership (Selected)

Institution Country Year Position 1 Bangladesh Professional Engineers Registration Board Bangladesh 2017-Present P Eng 2 The Engineering Council UK 2014-Present CEng 3 The Institution of Mechanical Engineers (IMechE) UK 2014-Present Member 4 The Institution of Engineers Australia Australia 2016-Present CPEng 5 The Institution of Engineers Australia Australia 2016-Present Member 6 American Society of Mechanical Engineers (ASME) USA 2006-Present Member

of 23


Institution Country Year Position 7 American Nano Society (ANS) USA 2006-2015 Member

8 European Society of Precision Engineering and Nanotechnology (euspen)

European Union 2005-Present Member

9 Board of Engineer Malaysia (BEM) Malaysia 2013-Present Member 10 Institution of Engineers Malaysia (IEM) Malaysia 2014-Present Member 11 Majlis Profesor Negara Malaysia 2011-Present Member

12 International Association of Computer Science and Information Technology (IACSIT)

Singapore 2011-Present Member

13 The Institution of Engineers, Bangladesh (IEB) Bangladesh 2006-Present Life Fellow 14 Bangladesh Society of Mechanical Engineers (BSME) Bangladesh 2004-Present Life Fellow

Honour/Recognition:

Description Organization

1

Panel Reviewer (International): Purchase of a Focused-Ion Beam Instrument for Research and Education (Proposal No.: 0741913, Indiana University) under NSF Funding for Chemistry Research Instrumentation and Facilities: Departmental Multi-User Instrumentation (CRIF:MU).(November 2007).

National Science Foundation (NSF) USA

2

22nd Edition, 2005, pp 38: Life-long achievements in academic and research have earned a position among the most accomplished men and women from around the world in a pre-eminent directory Marquis Who's Who in the World.

Marquis’ Who’s Who in the World

Workshop/Short Course (Selected 10)

Title Date Facilitator

1 Assessment: Blooms Taxonomy, Complex Problem Solving and Engineering Activities

20 Apr 2016 Prof. Ir. Dr. Siti Hawa Hamzah Board of Engineers Malaysia

2 Outcome Based Education in Engineering 14 Apr 2016 Prof. Ir. Dr. Ramesh Singh

Board of Engineers Malaysia

3 Workshop on Preparation on Self-Assessment Report for Engineering Accreditation

21-22 Jan 2016 Board of Engineers Malaysia

4 Two Day Workshop on Constructive Alignment

03-04 Aug 2015 IIUM

5 Two day Workshop on Accreditation and Assessment

28-29 Mar 2015 Prof. Ir. Megat Johari

Board of Engineers Malaysia

6 IIUM Succession Planning for Subject Matter Experts Kulliyyah of Engineering

02 Oct 2014 IIUM

7 In-House Training for Safety and Health: Committee Training Programme

21 Aug 2014 Abdul Harith Arshad

8 IIUM Training for Academic Leaders: University Professor 27 Feb 2012 Tan Sri Dzulkifli Abdul Razak

9

Dynamic I-LEAP: How to Develop & Commercialize Scientific Research to Relevant Industry and Global Market (Workshop 2)

1-2 Dec 2011 MOHE

10

Dynamic I-LEAP: How to Develop & Commercialize Scientific Research to Relevant Industry and Global Market (Workshop 3)

12-13 Dec 2011 MOHE

of 23


Research Interest:

1. Advanced Machining and Manufacturing 2. Non-traditional Machining 3. Non-traditional EDM 4. Micromachining, Microreplication, Microfabrication 5. Focused Ion Beam Micromilling 6. Surface Characterization 7. MEMS and Nanotechnology….

Research Group/Lab:

1. Precision Engineering Research Unit (Member) 2. Agile and Sustainable Manufacturing Research Unit (Member) 3. Micro and Precision Manufacturing Laboratory (Manager)

Consultant:

1. Advanced Engineering and Innovation Centre (AEIC), Faculty of Engineering, IIUM 2. Bureau of Consultancies and Entrepreneurship (BCE), IIUM 3. Tenaga Nasional Berhad (TNB) Concrete and Steel Poles-to-Composite Pole Project (2014-2015)

Other Particulars:

Date of Birth: 27 November 1968 Citizenship: Bangladesh Passport No.: BL 0682184 Permanent Residence: Malaysia (NRIC: 681127-79-5039) Language: Excellent English, Native Bengali, Fair Bahasa Melayu Religion: Islam (Sunni) Marital Status: Married No. of Children: 3

of 23

List of publication Professor Dr. Mohammad Yeakub Ali MIMechE CEng, MIEAust CPEng, MASME, MEUSPEN, MIEM, FIEB, FBSME PhD. (NTU), MEng (AIT), BSc Eng (BUET) Head Department of Manufacturing and Materials Engineering Faculty of Engineering, International Islamic University Malaysia PO Box 10, 50728 Kuala Lumpur, Malaysia Tel.: (603) 6196 4452, E-mail: [email protected] HP: (6) 01116673525, E-mail: [email protected]

A: Refereed International Citation Indexed Journal ISI Scopus Google Scholar

1 Adebisi, A. A., Maleque, M. A., Ali, M. Y. & Bello, K. A. (2016). Influence of Single and Multiple Particle Size Variation on Mechanical and Wear Behaviour of Aluminium Silicon Carbide Composites. Composite Interfaces, 23(6), 533-547.

√ √ √

2 Hosen, M. A., Chowdhury, M. S. H., Ali, M. Y., & Ismail, A. F. (2016). A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics, 6, 496-504.

√ √ √

3 Banu, A., Ali, M. Y. & Rahman, M. A. (2014). Micro-electro discharge machining of non-conductive zirconia ceramic: investigation of MRR and recast layer hardness. International Journal of Advanced Manufacturing Technology, 75(1-4), 257-267.

√ √ √

4 Zain, Z. M. MB Ndaliman, Khan, A. A. & Ali, M. Y. (2014). Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science, 228(18), 3374-3380.

√ √ √

5 Ndaliman, M. B., Khan, A. A., & Ali, M. Y. (2013). Influence of electrical discharge machining process parameters on surface micro-hardness of titanium alloy. Journal of Engineering Manufacture, 227(3), 460-464.

√ √ √

6 Ndaliman, M. B., Khan, A. A., & Ali, M. Y. (2013). Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy. Journal of Engineering Manufacture, 227(9) 1310–1316

√ √ √

7

Ali, M. Y., Karim, A. N. M., Adesta, E. Y. T., Ismail, A. F., Abdullah, A. A. & Idris, M. N. (2010). Comparative Study of Conventional and Micro WEDM based on Machining of Meso/Micro Sized Spur Gear. International Journal of Precision Engineering and Manufacturing, 11(5), 779-784.

√ √ √

8 Ali, M. Y., Hung, N. P., & Fu, Y. Q (2010). A Review of Focused Ion Beam Sputtering, International Journal of Precision Engineering and Manufacturing, 11(1), 157-170.

√ √ √

9 Mehfuz, R. & Ali, M. Y. (2009). Investigation of Machining Parameters for the Multiple Response Optimization of Micro Electro Discharge Milling. The International Journal of Advanced Manufacturing Technology, 43(3), 264-275.

√ √ √

10 Ali, M. Y., Hamad, M. H., & Karim, A. I. (2009). Form Characterisation of Microholes Produced by Micro Electrical Discharge Drilling. Materials and Manufacturing Processes, 24(6), 683-687.

√ √ √

11 Ali, M. Y. & Ammar, S. M. (2009). Effect of Conventional EDM Parameters on Micromachined Surface Roughness and Fabrication of Hot Embossing Master Microtool. Materials and Manufacturing Processes, 24(4), 454-458.

√ √ √

12 Ali, M. Y., & Mehfuz, R. (2009). Investigation of Finish Cut of Micro Electrodischarge Milling for Nano Surface Finish. Journal of Vacuum Science and Technology B, 27(3), 1330-1334.

√ √ √

13 Ali, M. Y. & Ammar, S. M. (2008). Experimental Study of Conventional Wire Electrical Discharge Machining for Microfabrication. Materials and Manufacturing Processes, 23(7), 641-645.

√ √ √

14 Ali, M. Y. & Loo, Y. W. (2007). Geometrical Integrity of Micromold Cavity Sputtered by FIB using Multilayer Slicing Approach. Microsystem Technologies, 13(1), 103-107.

√ √ √

15 Ali, M. Y. & Lim, B. H. (2006). Characterisation of Surface Texture using AFM with Trimmed Probe Tip. Surface Engineering, 22(6), 443-446.

√ √ √

16 Ali, M. Y. & Ong, A. S. (2006). Fabricating Micromilling Tool using Wire Electrodischarge Grinding and Focused Ion Beam Sputtering. The International Journal of Advanced Manufacturing Technology, 31(5-6), 501-508.

√ √ √

17 Ali, M. Y., Hung, N. P., Ngoi, B. K. A., & Yuan, S., (2003). Sidewall Surface Roughness of Sputtered Silicon I: Surface Modelling. Surface Engineering, 19(2), 97-103.

√ √ √

of 23

mailto:[email protected]

http://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=Ia642PsAAAAJ&pagesize=100&sortby=pubdate&citation_for_view=Ia642PsAAAAJ:M05iB0D1s5AC

http://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=Ia642PsAAAAJ&pagesize=100&sortby=pubdate&citation_for_view=Ia642PsAAAAJ:M05iB0D1s5AC

Publication Professor Dr. Mohammad YEAKUB Ali


18 Ali, M. Y., Hung, N. P., Ngoi, B. K. A., & Yuan, S., (2003). Sidewall Surface Roughness of Sputtered Silicon II: Model Verification. Surface Engineering, 19(2), 104-108.

√ √ √

19 Yuan, S., Hung, N. P., Ngoi, B. K. A., & Ali, M. Y., (2003). Development of Microreplication Processes- Microinjection Molding. Materials and Manufacturing Processes, 18(5), 731-751.

√ √ √

20 Hung, N. P., Fu, Y. Q., & Ali, M. Y. (2002). Focused-Ion-Beam Machining of Silicon. Journal of Materials Processing Technology, 127(2), 256-260.

√ √ √

21 Ali, M. Y., & Hung, N. P. (2001). Surface Roughness of Sputtered Silicon I: Surface Modeling, Materials and Manufacturing Processes, 16(3), 297-313.

√ √ √

22 Ali, M. Y., & Hung, N. P. (2001). Surface Roughness of Sputtered Silicon II: Model Verification. Materials and Manufacturing Processes, 16(3), 315-329.

√ √ √

23 Hung, N. P., Ali, M. Y., Fu, Y. Q., Ong, N. S., & Tay, M. L. (2001). Surface Integrity and Removal Rate of Sputtered Silicon. Machining Science and Technology, 5(2), 239-254.

√ √ √

24 Moudood, M. A., Ali, M. Y., Jaafar, I. H., & Banu, A. (2017). Electro discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (in review).

√ √

25

Sabur, A., Ali, M. Y., & Maleque, M. A. (2016). Comparative study of material removal rate of single-spark and multi-spark micro-EDM. Proceedings 6th Brunei International Conference on Engineering and Technology, UTB, Brunei Darussalam (accepted).

√ √

Jarin S., Saleh, T., Rana, M. Muthalif, A. G. A., & Ali, M. Y. (2017). An experimental investigation of gold coated Silicon using Nano powder mixed Micro-Wire Electro Discharge Machining. Procedia Engineering, (in press)

√ √

26 Ali, M. Y., Sulaiman, F., Banu, A., Mohamed A. R. & Muataz, H. F. H. (2017). Investigation of Accuracy in Microdrilling with Minimum Quantity Lubrication. Material Engineering Forum, 882, 3-7.

√ √

27 Ali, M. Y. Mohamed, A. R., Rosmarina, N. & Banu, A. (2016). Micro Wire Electro Discharge Grinding: Optimization of Material Removal Rate and Surface Roughness. IOP Conference Series: Materials Science and Engineering, (in press).

√ √

28 Ali, M. Y. Mohamed, A. R., Zalikha, S. N. & Banu, A. (2016). Investigation of Kerf in Micro Wire Electro Discharge Machining. IOP Conference Series: Materials Science and Engineering, (in press).

√ √

29 Ali, M. Y. Mohamed, A. R., Zuhaidah, Z. & Banu, A. (2016). Dimensional Accuracy of Micro-Electro Discharge Milling. IOP Conference Series: Materials Science and Engineering, (in press).

√ √

30 Mohamed, A. R., Ali, M. Y. & Rahman, A. (2016). Process Capability of High Speed Micro End-Milling of Inconel 718 with Minimum Quantity Lubrication (MQL). IOP Conference Series: Materials Science and Engineering, (in press).

√ √

31

Mohamed, A. R., Ali, M. Y. & Saddam, A. (2016). Effects of Vibration and Surface Roughness in High Speed Micro Milling of Inconel 718 with Minimum Quantity Lubrication (MQL). IOP Conference Series: Materials Science and Engineering, (in press).

√ √

32 Ali, M. Y., Sabur, A. & Maleque, M. A. (2016). Micro Electro Discharge Machining of Nonconductive Ceramic: The Issue of Spalling. Journal of Manufacturing Technology Research (Accepted)

√ √

33 Ali, M. Y, Suieb, N. & Banu, A. (2016). Micro Electro Discharge Machining Of Non-Conductive Ceramic Using Conductive Powder Mix Dielectric Fluid. Journal of Engineering and Applied Sciences, 11 (7).1469-1474.

√ √

34

Hosen, M. A., Chowdhury, M. S. H., Ali, M. Y., & Ismail, A. F. (2016). A comparison study on the harmonic balance method and rational harmonic balance method for the Duffing-harmonic oscillator. Global Journal of Pure and Applied Mathematics, 12(3), 2721-2732.

√ √

35 Sahar, S. F. M., Jaafar, I. H. & Ali, M. Y. (2015). Parametric study of Sputtering Microchannels via Focused Ion Beam (FIB). ARPN Journal of Engineering and Applied Sciences, 10 (23), 17397-17401.

√ √

36 Maleque, M. A., Ghazal, B. A., Ali, M. Y. & Ahmed, A. S. (2015). Wear Behaviour of TiC Coated AISI 4340 Steel Produced by TIG Surface Melting. Materials Science Forum, 819, 76-80.

√ √

37 Muataz, H. F. Al-H., Ndaliman, M. B., Ali, M. Y. & Khan, A. A. (2015). Analyzing the Influence of Electrical Parameters on EDM Process of Ti6Al4V Alloy using

√ √

of 23



Adaptive Neuro-Fuzzy Inference System (ANFIS). International Review of Mechanical Engineering, 9(3), 237-241.

38 Sabur, A., Ali, M. Y., Maleque, M. A., & Moudood, M. A. (2014). Micro-EDM for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive & Mechanical Engineering, 10(2), 1841-1851.

√ √

39 Moudood, M. A., Sabur, A., Lutfi, A., Ali, M. Y. & Jaafar, I. H. (2014). Investigation of the machinability of non-conductive ZrO2 with different tool electrodes in EDM. International Journal of Automotive & Mechanical Engineering, 10(2), 1866-1876.

√ √

40

Sabur, A., Ali, M. Y., Maleque, M. A., & Idris, S. (2014). Modelling of material removal rate in electro discharge machining of nonconductive ZrO2 ceramic with kerosene and EDM oil dielectric fluid. Journal of Mechanical Engineering, 11(1), 31-43.

√ √

41 Sabur, A., Moudood, M., Ali, M. Y., Maleque, M. A. (2014). Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 ceramic. Applied Mechanics and Materials. 465-466, 1329-1333.

√ √

42 Moudood, M. A., Sabur, A., Ali M. Y., & Jaafar, I. H. (2014). Effect of Peak Current on Material Removal Rate for Electrical Discharge Machining of Non-conductive Al2O3 Ceramic. Advanced Materials Research. 845, 730-734.

√ √

43 Mohamed, A. R., Asfana, B., & Ali, M. Y. (2014). Investigation of Recast Layer of Non-Conductive Ceramic due to Micro-EDM, Advanced Materials Research. 845, 857-861.

√ √

44 Muataz, H. F. Al-H., Ndaliman, M. B., Ali, M. Y. & Khan, A. A. (2013). Modeling the electrical parameters in EDM process of Ti6Al4V alloy using Neural Network method. International Review of Mechanical Engineering, 7(7), 1464-1470.

√ √

45 Sabur, A., Ali, M. Y., Maleque, M. A. (2013). Modelling of Material Removal Rate in EDM of Nonconductive ZrO2 Ceramic by Taguchi Method. Applied Mechanics and Materials. 393, 246-252.

√ √

46 Mohamed, A. R., Atiqah, N., Ali, M. Y., & Chowdhury, M. S. H. (2013). Tool Vibration due to High Speed Micro End Milling Parameters. Applied Mechanics and Materials, 372, 364-368.

√ √

47 Abdullahi, U., Maleque, M. A., Yaacob, I. I., & Ali, M. Y. (2013). Effect of ball milling parameter on the synthesization of carbon nanotube aluminium nano-composite. Advanced Materials Research, 626, 537-541.

√ √

48

Sabur, A., Moudood, M. A., Ali, M. Y., & Maleque, M. A. (2013). Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. In IOP Conference Series: Materials Science and Engineering, 53 (1), 012090.

√ √

49 Sabur, A., Ali, M. Y., Maleque, M. A., Khan, A. A. (2013) Investigation of Material Removal Characteristics in EDM of Nonconductive ZrO2 Ceramic. Procedia Engineering, 56, 696-701.

√ √

50 Ali, M. Y., Mohamed, A. R., Fadila, N. and Hannah, N. (2013). Investigation of Burr in High Speed Microdrilling. Applied Mechanics and Materials, 278-280, 389-392.

√ √

51 Ali, M. Y., Mohamed, A. R., Khan, A. A., Asfana, B., Lutfi, M. & Fahmi, M. I. (2013). Empirical Modelling of Vibration in Micro End Milling of PMMA. World Applied Sciences Journal, 21, 73-78.

√ √

52 Ndaliman, M. B., Khan, A. A., Ali, M. Y. & Wahid, Z. (2013). Determination of Influential Factors on EDMed Surface Properties Using Plackett-Burman Design. World Applied Sciences Journal, 21, 88-93.

√ √

53 Ndaliman, M. B., Khan, A. A., Ali, M. Y., & Hambiyah, M. M. (2013). Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. IOP Conference Series: Materials Science and Engineering, 53(1), 012002).

√ √

54 Abdullahi, U., M. A. Maleque, I. Y. Iskandar & Ali M. Y. (2012). Carbon nano tube reinforced aluminium matrix nano-composite: A critical review. Australian Journal of Basic and Applied Sciences, 6(12): 69-75

√ √

55 Ali, M. Y., Mohamed, A. R., Asfana, B., Lutfi, M. & Fahmi, M. I. (2012) Investigation of Vibration and Surface Roughness in Micro Milling of PMMA. Applied Mechanics and Materials, 217-219, 2187-2193.

√ √

56 Ali, M. Y., Liew, W. Y. H., Gure, S. A. & Asfana, B. (2012). Influence of Energy Parameters of Micro WEDM on Kerf. Advanced Materials Research, 576, 527-530.

√ √

57 Ndaliman, M. B., Khan, A. A. & Ali, M. Y. (2012). Formation of Nitrides and Carbides on Titanium Alloy Surface through EDM. Advanced Materials Research, 576, 7-10.

√ √

of 23



58 Khan, A. A., Ndaliman, M. B., Ali, M. Y., Mansor, M. H. & Idrus, N. A. (2012). Surface Modification by EDM using Co-Cr Sintered Powder Metallurgy Electrode. Advanced Materials Research, 576, 56-59.

√ √

59 Zain, Z. M., Ndaliman, M. B., Khan, A. A. & Ali, M. Y. (2012). Electro-Discharge Machining of SUS 304 Stainless Steel with TaC Powder-Mixed Dielectric. Advanced Materials Research, 576, 72-75.

√ √

60 Reddy, M. M., Gorin, A., Abou-El-Hossein, K. A., Sujan, D., Ali, M. Y. & Maleque, M. A. (2012). Tool Wear Analysis in End Milling of Advanced Ceramics with TiAlN and TiN Coated Carbide Inserts. Advanced Materials Research, 576, 76-79.

√ √

61 Sujan, D., Yeo, C. W., Rahman, M. E., Reddy, M. M., Maleque, M. A. & Ali, M. Y. (2012). Aluminum-Silicon Carbide Composites for Enhanced Physio-Mechanical Properties. Advanced Materials Research, 576, 370-373.

√ √

62 Al-Ghamdi, A. S. & Ali, M. Y. (2012). Mechanical Performance and Water Absorption Resistance of HIPS/MWCNTs Nanocomposite. Advanced Materials Research, 576, 421-424.

√ √

63 Atiqah, N., Jaafar, I. H., Ali, M. Y. & Asfana, B. (2012). Application of Focused Ion Beam Micromachining: A Review. Advanced Materials Research, 576, 507-510.

√ √

64 Karim, A. N. M., Jaafar, A. A. B., Abdullah, M. A. I., Haque, M., Ali, M. Y. & Azline, S. A. (2012). Applying Value Stream Mapping for Productivity Improvement of a Metal Stamping Industry. Advanced Materials Research, 576, 727-730.

√ √

65 Ali, M. Y., Atiqah, N. A. R. & Erniyati, M. A. (2012). Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Investigation of Material Removal Rate. Advanced Materials Research, 383-390, 1759-1763.

√ √

66 Ghamdi, A. S. and Ali, M. Y. (2012). Rheological and Thermal Behaviour of High Impact Polystyrene Nanocomposite. Advanced Materials Research, 383-390, 3849-3853.

√ √

67 Ali, M. Y., Adesta, E. Y. T., Atiqah, N. A. R. & Erniyati, M. A. (2012). Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. Advanced Materials Research, 341-342, 142-146.

√ √

68 Adesta, E. Y. T., Riza, M. & Ali, M. Y. (2012). Cutting Force Impact to Tool Life of CT5015 in High Speed Machining by Applying Negative Rake Angles. Applied Mechanics and Materials, 117-119, 633-638.

√ √

69 Ali, M. Y., Atiqah, N. A. R. A & Erniyati, M. A. (2011). Silicon Carbide Powder Mixed Micro Electro Discharge Milling of Titanium Alloy. International Journal of Mechanical and Materials Engineering, 6(3), 338-342.

√ √

70 Ndaliman, M. B., Khan, A. A., & Ali, M. Y. (2011). Surface Modification of Titanium Alloy Through Electrical Discharge Machining (EDM). International Journal of Mechanical and Materials Engineering, 6(3), 380-384.

√ √

71 Afifah, M. A., Khan, A. A. & Ali, M. Y. (2011). Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. Advanced Materials Research, 264-265, 1015-1020.

√ √

72 Hajar, N. & Ali, M. Y. (2011). Investigation of Microholes Produced by Focused Ion Beam Micromachining. Advanced Materials Research, 264-265, 1346-1351.

√ √

73 Ali, M. Y. & Hajar, N. (2011). Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. Advanced Materials Research, 264-265, 1352-1356.

√ √

74 Khan, A. A., Ali, M. Y., & Haque, M. M. (2010). A New Approach of Applying Cryogenic Coolant in Turning AISI 304 Stainless Steel. International Journal of Mechanical and Materials Engineering, 5(2), 171-174.

√ √

75 Khan, A. A., Ali, M. Y. & Haque, M. M. (2010). Effect of Discharge Current and Electrode Size on Material Removal Rate and Wear Ratio in Electrical Discharge Machining. Journal of Mechanical Engineering, 7(1), 81-90.

√ √

76 Ali, M. Y. (2009). Fabrication of Microfluidic Channel using Micro End Milling and Micro Electrical Discharge Milling. International Journal of Mechanical and Materials Engineering, 4(1), 93-97.

√ √

77

Ali, M. Y., Khan, A. A., Hamzah, M., & Khalid, N. A. (2009). Study of Material Removal Rate and Electrode Wear Ratio for Micro Electrical Discharge Milling of AISI 420 and Stavax ESR Steel with Tungsten Carbide Electrode. International Journal of Mechanical and Materials Engineering, 4(3), 300-308.

√ √

78 Ali, M. Y., Omar, M. A., Othman, K. I. & Hung, N. P. (2009). Prediction of Burr Formation in Fabricating MEMS Components by Micro End Milling. Advanced Materials Research, 74, 247-250.

√ √

of 23



79 Khan, A. A., Ali, M. Y., & Haque, M. M. (2009). A Study of Electrode Shape Configuration on the Performance of Die Sinking EDM. International Journal of Mechanical and Materials Engineering, 4(1), 19-23.

√ √

80

Ali, M. Y., Khan, A. A., Othman, K. I., & Omar, M. A. (2009). Micro End Milling of AISI 304 Stainless Steel and Analysis of Micro Surface Roughness. Proceedings International Conference on Mechanical and Electrical Technology (08-11 August, Beijing, China), 273-277, doi: 10.1115/1.802946.paper44, ASME Press.

√ √

81

Hung, W. N. P., Agnihorti, M. M., Ali, M. Y., & Yuan, S. (2006). Molding of Three Dimensional Microcomponents. Proceedings International Conference on Manufacturing Science and Engineering, (08 –11 October, Michigan, USA). 1043-1050. ASME Press.

√ √

82 Ali, M. Y, Hung, N. P., & Yuan, S. (2001). Mathematical Modeling of Sputering-Induced Surface Roughness. SPIE, 4408, 510-521.

√ √

83 Hung, N. P., Yuan, S., Lee E. C. W., & Ali, M. Y. (2001). Development of Micromolding Process. SPIE, 4408, 317-328.

√ √

84 Hung, N. P., Ali, M. Y., & Yuan, S. (2000). Producing LIGA-Competitive Microcomponents. SPIE, 4174, 49-57.

√ √

Ali, M. Y., Norsyazila, J., Mohamed, A. R., Hasan, M. H., & Banu, A. (2017). Investigation Of Minimum Quantity Lubrication In Tool Based Micromilling. IIUM Engineering Journal. (Accepted, in press)

√

85 Banu, A., & Ali, M. Y. (2016). Electrical Discharge Machining (EDM): A Review. International Journal of Engineering Materials and Manufacture, 1(1) 3-10.

√

86 Atiqah, N., Ali, M. Y., Mohamed, A. R., & Hossein. M. S. (2015). Investigation of Surface Roughness and Material Removal Rate for High Speed Micro End Milling on PMMA. Advanced Materials Research, 1115, 12-15.

√

87 Asfana, B., Ali, M. Y., Mohamed, A.R. & Hung, W. N .P. Hung (2015). Investigation of MRR in Micro-EDM of Non-Conductive Ceramic. Advanced Materials Research, 1115, 20-23.

√

88 Sabur, A., Mehdi, S. M., Ali, M. Y., Maleque, M. A., & Moudood, A. (2015). Investigation of Surface Roughness in Micro-EDM of Nonconductive ZrO2 Ceramic with Powder Mixed Dielectric Fluid. Advanced Materials Research, 1115, 16-19.

√

89 Moudood, M. A., Sabur, A., Ali, M. Y., & Jaafar, I. H. (2015). Effect of Gap voltage and Pulse-On time on Material Removal Rate for Electrical Discharge Machining of Al2O3. Advanced Materials Research, 1115, 3-6.

√

90 Maleque, M. A., Ghazal, B. A., Ali, M. Y., Hayyan, M. & Saleh, A. A. (2015). Corrosion of Surface Modified AISI 4340 Steel in Jatropha Biodiesel. Advanced Materials Research, 1115, 243-246.

√

91 Musa, M. H. A., Maleque, M. A., Ali, M. Y., & Hasan, M. H. (2015). Fracture Behavior Issues in HSLA Pipeline Steels - A Review. Advanced Materials Research, 1115, 207-212.

√

92 Maleque, M. A., Abdullahi, U., & Ali, M. Y. (2015). Morphology of CNT-Al Nanocomposite under Different Ball Milling Parameters. Advanced Materials Research, 1115, 398-401.

√

93 Abdulmumin, A. A., Maleque, M. A., & Ali, M. Y. (2015). Wear Characteristics of Multiple Particle Size Silicon Carbide Reinforced Aluminium Composite. Advanced Materials Research, 1115, 174-177.

√

94 Ndaliman, M. B., Bala, K. C., Khan, A. A., Ali, M. Y., Abdullahi, U., & Abdulmumin, A. A, (2015). The effects of Sliding Parameters on Dry Wear Characteristics of Ti-6Al-4V Alloy. Advanced Materials Research, 1115, 213-216.

√

95 Zainudin, N., Elfaki, F. A. M., and Ali, M. Y. (2014). A Review On Parametric And Nonparametric Empirical Likelihood Method Based On Interval-Censored Data. Science International Lahore, 26(3), 977-982.

√

96 U. Abdullah, M. A. Maleque, I.I. Yaacob, M.Y. Ali (2013). Characterization of carbon nanotube aluminium nanocomposite - Effect of ball milling time on particle size. International Journal of Academic Research Part A; 5(2), 91-93.

√

97

Ndaliman, M. B., Muataz, H. F. Al-H., Ali Khan, A., & Ali, M. Y. (2012). Development of a new model for predicting EDM properties of Cu-TaC compact electrodes based on artificial neural network method. Australian Journal of Basic and Applied Sciences, 6(13), 192-199.

√

of 23



98 Ali, M. Y., Khan, A. A., Asharaf, A. B. M. & Wahab, A. A. (2012). Prediction of Minimum Chip Thickness in Tool Based Micro End Milling. International Journal of Integrated Engineering, 4(1), 6-10.

√

99 A. A. Khan, S. Mridha, & M. Y. Ali (2009). Cryogenic Grinding of Mild Steel and Stainless Steel. The International Journal of Manufacturing Science and Production, 10(1), 69-72.

√

100 Nuruzzaman, D. M., Nakajima, A., Mawatari, T., & Ali, M. Y. (2007). Durability and Tribological Properties of Thermally Sprayed WC Cermet Coating in Lubricated Rolling with Sliding Contact. IIUM Engineering Journal, 8(1), 49-62.

√

B: Refereed International Conference Presentation and Proceedings ISI Scopus Google Scholar

101

Muataz, H. F. Al-H, M. H. F., Ndaliman, M. B., Ali, M. Y., & Khan, A. A. (2013). Simulating the Electrical and Thermal Conductivity in EDM Die Sinking of Cu-TaC Compact Electrodes Using Neural Network. Proceedings International Conference on Advanced Computer Science Applications and Technologies (22-24 December), Kuching, Malaysia. 74-79.

√

102

Khan, A. A., Ndaliman, M. B., Ali, M. Y., Al-Falahi, M. D., Ibrahim, H. A., & Mustapa, M. S. (2013). The Effect of EDM with External Magnetic Field on Surface Roughness of Stainless Steel. Proceedings 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (2-4 July), Kuala Lumpur, Malaysia.

√

103

Khan, A. A., Ndaliman, M. B., Ali, M. Y., Lawal, S. A., Sulong, N. F. B., & Mohamad, U. A. K. B. (2013). Effect of Electrical Parameters on Performance of Cu-TiC Mixed Ceramic Compact Electrode in EDM Process. Proceedings 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (2-4 July), Kuala Lumpur, Malaysia.

√

104

Ali, M. Y., Khan, A. A., Asfana, B. M. A. & Adibah, A. W. (2011). Investigation of Minimum Chip Thickness in Micro End Milling. Proceedings International Conference on Mechanical and Manufacturing Engineering (6-8 June), Putrajaya, Malaysia, Paper ID: 107.

√

105

Zakaria, M. Z., Ndaliman, M. B., Khan, A. A. & Ali, M. Y. (2011). Influence of TaC Powder Additive on Electrical Discharge Machining of Stainless Steel. Proceedings International Conference on Mechanical and Manufacturing Engineering (6-8 June), Putrajaya, Malaysia, Paper ID: 43.

√

106 Ali, M. Y., Maleque, M. A., & Asfana B. M. A. (2011). Investigation of Tribological Issues in Microforming. Proceedings Regional Tribology Conference (22-24 November), Langkawi Island, Malaysia. RTC018, 82-87.

√

107

Ndaliman, M. B., Khan, A. A. & Ali, M. Y. (2011). Surface Alloying of Ti-6Al-4V using Cu-TaC Composite Electrode during Electrical Discharge Machining. Proceedings Regional Tribology Conference (22-24 November), Langkawi Island, Malaysia RTC072, 133-138.

√

108 Ali, M. Y. & Hajar, N. (2010). Fabrication of Bio-MEMS Nanostructure by Focused Ion Beam. Proceedings International Conference on the Advancement of Materials and Nanotechnology (29 Nov-01 Dec), Kuala Lumpur, Malaysia, Paper ID: DS 009.

√

109 Khan, A. A., Adesta, E. Y.T. & Ali, M. Y. (2010). Influence of Process Parameters on Surface Integrity during EDM of Mild Steel. Proceedings 22nd United Kingdom-Malaysia Engineering Conference (8-9 April), Paper Code: CE-11-1.

√

110

Ali, M. Y., Amin, A. A. Khan, Reyad, M., Aishah, S., & Hayati, N. (2008). Fabrication of Micromold Cavity for Microreplication. Proceedings International Conference on Mechanical and Manufacturing Engineering (21-23 May), Johor Bahru, Malaysia, MFG_ID 127.

√

111

Ali, M. Y., Amin, A. K. M. N., Reyad, M., Nazran, W., & Akif, M. (2008). Influence of Micro End Milling Process Parameters on Surface Roughness. Proceedings International Conference on Mechanical and Manufacturing Engineering (21-23 May), Johor Bahru, Malaysia, MFG_ID 125.

√

112

Khan, A. A., Mridha, S., & Ali, M. Y. (2008). Effect of Cryogenic Cooling during Grinding of Mild Steel and Stainless Steel. Proceedings International Conference on Mechanical and manufacturing Engineering (21-23 May), Johor Bahru, Malaysia, MFG_ID 011

√

of 23



113 Ali, M. Y. (2008). Microengineering Education in IIUM: Challenges and Successes. Proceedings International Conference in MEMS and Nanotechnology, (13–15 May) Kuala Lumpur, Malaysia, 228-231.

√

114 Ali, M. Y. & Ismail, A. F. (2008). Nanotechnology Education at Undergraduate Level: Malaysian Scenario. Proceedings National Seminar on Science, Technology and Social Sciences (STSS) (02-04 June), Kuantan, Malaysia, 871-879.

√

115 Mehfuz, R., & Ali, M. Y. (2007). Surface Roughness Analysis of Beryllium-Copper Alloy in Micro End Milling. Proceedings 7th International Conference on Mechanical Engineering (29-31 December), Dhaka, Bangladesh, ICME07-AM-07.

√

116 Ali, M. Y., Rashidah, N. I., & Azima, N. A. (2007). Wire Electrical Discharged Machining for Microfabrication. Proceedings 7th International Conference on Mechanical Engineering (29-31 December), Dhaka, Bangladesh, ICME07-AM-08.

√

117 Ali, M. Y., Ammar, S. M., & Reyad, M. (2007). Fabrication of Meso-Micro-Channel for Micro-Fluidic Analysis. Proceedings International Conference on Biotechnology Engineering, (8-10 May), Kuala Lumpur, Malaysia, 225-231.

√

118 Ali, M. Y., Amin, A. K. M. N., & Haque, M. M. (2007). Manufacturing Engineering Education in IIUM. Proceedings 2nd Regional Conference on Engineering Education (03-05 December), Johor Bahru, Malaysia, 473-478.

√

119

Ali, M. Y. Ammar, S. M., Baayah, N., Aishah, S., Zaliha, S., & Hayati, N. (2006). Optimization of EDM Parameters for Micro/Meso Fabrication. Proceedings 3rd BSME-ASME International Conference on Thermal Engineering, (20–22 December) Dhaka, Bangladesh.

√

120

Konneh, M., Izman, S., & Ali, M. Y. (2006). An Investigation on Morphology of Hard-Brittle Silicon Surface by Diamond Grinding, Proceedings International Conference on Manufacturing Science and Technology (28-30 August), Melaka, Malaysia, 118-121.

√

121 Ali, M. Y., & Loo, Y. W. (2006). Sputtering of Paraboloid Microstructure Using FIB. Proceedings International Conference in MEMS and Nanotechnology, (15–16 March) Kuala Lumpur, Malaysia, 13-16.

√

122 Amar S. M. & Ali, M. Y. (2006). Fabricating Hot Embossing Micro Tool using Electrodischarge Machining. Proceedings International Conference on Manufacturing and Materials Processing (14-16 March), Kuala Lumpur, Malaysia, 123-126.

√

123

Reyad, M., & Ali, M. Y. (2006). Micro/Meso Mechanical Manufacturing (M4): Opportunities and Challenges –A Review. Proceedings Regional Postgraduate Conference on Engineering and Science (26-27 July), Johor Bahru, Malaysia, 463-467.

√

124 Ali, M. Y., Ong, A. S. & Konneh M. (2005). Micromilling of Tungsten Carbide using Focused Ion Beam. Proceedings 6th International Conference on Mechanical Engineering (28-30 December), Dhaka, Bangladesh, AM 24, 1-4.

√

125

Ali, M. Y., Hafidz, M. A, & Saiful, A. M. I. (2005). Development of Prototype Micro Hot Embossing Setup. Proceedings 5th International Mechanical Engineering Conference & 10th Annual Paper Meet, The Institution Of Engineers, Bangladesh (30 September – 02 October), 34-39.

√

126 Ali, M. Y. & Lim, B. H. (2005). Trimming of atomic force microscope probe tip by ion milling. Proceedings The 2nd International Conference in Mechatronics, (10–12 May) Kuala Lumpur, Malaysia, 751-755.

√

127 Yuan, S., Ngoi, B. K. A., & Ali, M. Y. (2004). Fabrication of Microcomponents by Injection Molding. Proceedings International Conference on Precision Engineering (02-05 March), Singapore, 604-610.

√

128

Ali, M. Y., Ngoi, B. K. A., Hung, N. P., Yuan, S., & Lee, C. P. (2002). Hot Embossing and Injection Molding of Three-Dimensional Microcomponents. Proceedings BSME-ASME International Conference on Thermal Engineering, (31 Dec. 2001-02 January 2002), Dhaka, Bangladesh, 659-664.

√

129 Ali, M. Y., Ngoi, B. K. A, Hung, N. P., M. Alauddin, & Yuan, S. (2001). Surface Roughness of Ion-Sputtered Micromold. Proceedings 4th International Conference on Mechanical Engineering (26-28 December), Dhaka, Bangladesh, 207-212.

√

130 Ali, M. Y., Hung, N. P., & Yuan, S. (2000). Simulation of Micro-Injection Molding. Proceedings International Conference on Precision Engineering (21-23 March), Singapore, 535-540.

√

of 23



131 Ali, M. Y., & Bohez, E. L. J. (2000). Knowledge-Based Approach for Stretch Blow Molding. Proceedings International Conference on Precision Engineering (21-23 March), Singapore, 237-242.

√

132 Ali, M. Y., & Hung, N. P. (2000). Fabrication of Micro Cavities by Micro Electrical Discharged Machining. Proceedings International Conference on Manufacturing (24-26 February), Dhaka, Bangladesh, 285-291.

√

133

Ali, M. Y., & Hung, N. P. (2000). Fabrication of Three Dimensional Micro-Components–A Review. Proceedings Sixth Annual Paper Meet and International Conference on Mechanical Engineering in 21st Century (17-19 February), Dhaka, Bangladesh, 418-427.

√

134 Ali, M. Y. (2008). Focused Ion Beam Micromachining of MEMS. Proceedings 2nd International Symposium on Advanced Mechatronics Engineering (29 February). Changwon, Busan, S. Korea, 8-16.

C: Book Chapter Publisher ISI Scopus Google Scholar

135 Ali, M. Y., & Hung, W. N. P. (2017) Micromachining. In: Hashmi, M. S. J. (ed.), Comprehensive Materials Finishing. Vol. 1, 322–343. Oxford.

Elsevier √ √

136

Ali, M. Y., Rosfazila, M. R., & Rosnita, E. (2008). Geometrical Integrity of Microholes Drilled by Conventional and Micro Electrical Discharge Machining. In: Yan, X. T. (ed.), Advanced Design and Manufacture to Gain Competitive Edge. 731-739. London.

Springer √ √

137

Ali, M. Y., Rahman, M. A., Banu, A., Adnan, S., & Nadia, F. (2016). High Aspect Ratio Micro-EDM Drilling with Nano Surface Finish. In: Regional Conference on Science, Technology and Social Sciences. 157-164). Singapore

Springer √

138

Ali, M. Y. Mehfuz, R., Khan, A. A. & Ismail, A. F. (2012). Micro Eletro Discharge Milling for Microfabrication. In: Kahrizi, M. (ed.), Micromachining Techniques for Fabrication of Micro and Nano Structures. 131-158. Croatia.

InTech Open

√

139

Khan, A. A. & Ali, M. Y. (2012). Application of Silicon Carbide in Abrasive Water Jet Machining. In: Kahrizi, M. (ed.), Micromachining Techniques for Fabrication of Micro and Nano Structures. 431-452. Croatia.

InTech Open

√

140

Hung N. P., Ngothai Y., Yuan S., Lee C.W. & Ali M.Y. (2001). Micromolding of Three-Dimensional Components. In: Inasaki, I. (ed.), Initiatives of Precision Engineering at the Beginning of a Millennium, Part I: Cutting/Special Machining. 142-146. New York

Kluwer- Springer

√

141

Ali M.Y., Hung N. P. & Yuan S. (2001). Surface Roughness of FIB Sputtered Silicon. In: Inasaki, I. (ed.), Initiatives of Precision Engineering at the Beginning of a Millennium, Part I: Cutting/Special Machining. 147-151. New York

Kluwer-Springer

√

142 Sabur, A., Maleque, M. A. & Ali, M. Y. (2012). Machining of Ceramic Materials: A Review. In: Ali, M. Y. (ed.), Advanced Machining Process. 38-43. Kuala Lumpur.

IIUM

143 Israd, H. J., Atiqah, N., Asfana B. & Ali, M. Y. (2012). Focused Ion Beam Micromachining: Technology and Application. In: Ali, M. Y. (ed.), Advanced Machining Process. 77-82. Kuala Lumpur.

IIUM

144

Ali, M. Y., Faizal, M., Asfana, B. & Atiqah, N. (2012). Finish Cut of Titanium Alloy using Micro Electro Discharge Milling for Nano Surface Finish. In: Ali, M. Y. (ed.), Advanced Machining Process. 83-88. Kuala Lumpur.

IIUM

145

Ali, M. Y., Saifuddin, M., Atiqah, N. & Asfana B. (2012). Investigation of MRR for Finish Cut of Titanium Alloy using Micro Electro Discharge Milling. In: Ali, M. Y. (ed.), Advanced Machining Process. 89-94. Kuala Lumpur.

IIUM

146

Ali, M. Y., Saifuddin, M., Atiqah, N. & Asfana B. (2012). Investigation of TWR for Finish Cut of Titanium Alloy using Micro Electro Discharge Milling. In: Ali, M. Y. (ed.), Advanced Machining Process. 95-100. Kuala Lumpur.

IIUM

of 23


C: Book Chapter Publisher ISI Scopus Google Scholar

147

Ali, M. Y., Hamizah, S. & Adila, N. (2012). Investigation of Chip Formation and Minimum Chip Thickness in Micro/Meso Milling: Methodology and Design of Experiment. In: Ali, M. Y. (ed.), Advanced Machining Process. 101-107. Kuala Lumpur.

IIUM

148

Ali, M. Y., Adila, N. & Hamizah, S. (2012). Micro/Meso Milling of Aluminium Alloy 1100: Analysis and Modelling of Minimum Chip Thickness. In: Ali, M. Y. (ed.), Advanced Machining Process. 108-112. Kuala Lumpur.

IIUM

149 Ali, M. Y., Adila, N. & Hamizah, S. (2012). Effect of Micro End Milling Tool Diameter on Minimum Chip Thickness. In: Ali, M. Y. (ed.), Advanced Machining Process. 113-118. Kuala Lumpur.

IIUM

150

Ali, M. Y. Ahmad, C. E. & Musab, J. A. (2012). Micro Wire Electrical Discharge Machining of Tungsten Carbide: Methodology and Procedure. In: Ali, M. Y. (ed.), Advanced Machining Process. 3119-123. Kuala Lumpur.

IIUM

151

Ali, M. Y. Ahmad, C. E. & Musab, J. A. (2012). Micro Wire Electrical Discharge Machining of Tungsten Carbide: Analysis of Surface Roughness. In: Ali, M. Y. (ed.), Advanced Machining Process. 124-129. Kuala Lumpur.

IIUM

152

Ali, M. Y., Musab, J. A. & Ahmad, C. E (2012). Micro Wire Electrical Discharge Machining of Tungsten Carbide: Analysis of Material Removal Rate. In: Ali, M. Y. (ed.), Advanced Machining Process. 130-135. Kuala Lumpur.

IIUM

153 Ali, M. Y., Emira, W. A. & Suriza, N. (2012). Micro Electro Discharge Machining of Micro Pillar Array: Process Development. In: Ali, M. Y. (ed.), Advanced Machining Process. 136-141. Kuala Lumpur.

IIUM

154 Ali, M. Y., Emira, W. A. & Suriza, N. (2012). Micro Electro Discharge Machining of Micro Pillar Array: Analysis of Surface Finish. In: Ali, M. Y. (ed.), Advanced Machining Process. 142-147. Kuala Lumpur.

IIUM

155 Ali, M. Y., Suriza, N. & Emira, W. A (2012). Micro Electro Discharge Machining of Micropillar Array: Analysis of Material Removal Rate. In: Ali, M. Y. (ed.), Advanced Machining Process. 148-153. Kuala Lumpur.

IIUM

156 Ali, M. Y., Lutfi, M. & Fahmi, M. I. (2012). Vibration Issue in Micro End Milling. In: Ali, M. Y. (ed.), Advanced Machining Process. 154-158. Kuala Lumpur.

IIUM

157 Sabur, A. & Ali, M. Y. (2012). Fabrication of Micro Filter by Electro Discharge Machining. In: Ali, M. Y. (ed.), Advanced Machining Process. 159-164. Kuala Lumpur.

IIUM

D: Book Publisher ISI Scopus Google Scholar

158

Iskandar, I. Y., Ali, M. Y., Sopyan, I., & Hashmi, M. S. J. (2015). Advances in Manufacturing and Materials Engineering: Advanced Materials Research. Vol. 1115. (ISSN-Print: 978-3-03835-493-2, ISSN-CD: 983-3-03859-275-4, e-ISSN: 978-3-03826-960-1).

Trans Tech

159

Rahman, M., Erry Y. T. A., Ali, M. Y., Karim, A. N. M., Maleque, M. A., Hazleen, A., Tasnim F. M. A., Iqbal, M., Noorasikin, S. & Noor A. H. (2012). Advances in Manufacturing and Materials Engineering: Advanced Materials Research. Vol. 576. (ISSN-Print: 1022-6680, ISSN-CD: 1022-6680, e-ISSN: 1662-8985).

Trans Tech

160 Ali, M. Y., Amin, N. & Erry, Y. T. A. (2011). Advanced Machining Process. Kuala Lumpur.

RMC, IIUM

161 Amin, N., Erry, Y. T. A., & Ali, M. Y. (2011). Advanced Machining Towards Improved Machinability of Difficult-To-Cut Materials. Kuala Lumpur.

RMC, IIUM

162 Erry, Y. T. A., Iskandar, I. Y., Ali, M. Y., Maleque, M. A. & Tasnim, F. (2010). Materials Processing and Precision Engineering. Kuala Lumpur.

RMC, IIUM

163 Mridha, S., Ali, M. Y. & Afzeri (2009). Book of Abstract. International Conference on Advances in Materials and Processing Technologies. Kuala Lumpur.

IIUM

of 23


E: Conference Presentation (Paper Published in Journal/Periodical) Date City, Country

164 Sabur, A., Ali, M. Y., & Maleque, M. A. (2016). Comparative study of material removal rate of single-spark and multi-spark micro-EDM. 6th Brunei International Conference on Engineering and Technology.

2016 14-16 Nov

Bandar Seri Begawan

Brunei Darussalam

165

Ali, M. Y. Mohamed, A. R., Rosmarina, N. & Banu, A. (2016). Micro Wire Electro Discharge Grinding: Optimization of Material Removal Rate and Surface Roughness. International Conference on Mechanical, Automotive and Aerospace Engineering.

2016 25-27 July

Kuala Lumpur Malaysia

166

Ali, M. Y. Mohamed, A. R., Zalikha, S. N. & Banu, A. (2016). Investigation of Kerf in Micro Wire Electro Discharge Machining. International Conference on Mechanical, Automotive and Aerospace Engineering.

2016 25-27 July


167 Ali, M. Y. Mohamed, A. R., Zuhaida, Z. & Banu, A. (2016). Dimensional Accuracy of Micro-Electro Discharge Milling. International Conference on Mechanical, Automotive and Aerospace Engineering.

2016 25-27 July


168

Mohamed, A. R., Ali, M. Y. & Rahman, A. (2016). Process Capability of High Speed Micro End-Milling of Inconel 718 with Minimum Quantity Lubrication (MQL). International Conference on Mechanical, Automotive and Aerospace Engineering.

2016 25-27 July


169

Mohamed, A. R., Ali, M. Y. & Saddam, A. (2016). Effects of Vibration and Surface Roughness in High Speed Micro Milling of Inconel 718 with Minimum Quantity Lubrication (MQL). International Conference on Mechanical, Automotive and Aerospace Engineering.

2016 25-27 July


170

Ali, M. Y., Sulaiman, F., Banu, A., Mohamed A. R. & Muataz, H. F. H. (2016). Investigation of Accuracy in Microdrilling with Minimum Quantity Lubrication. International Conference on Manufacturing Science and Technology.

2016 16-18 July

Sarawak Malaysia

171

Ali, M. Y., Suieb, N. & Banu, A. (2016). Micro Electro Discharge Machining of Non-Conductive Ceramic using Conductive Powder Mix Dielectric Fluid. Applied Mathematics in Science and engineering International Conference.

2016 26-28 July

Melaka Malaysia

172

Sabur, A., Ali, M. Y., Maleque, M. A., & Moudood, M. A. (2015). Micro Electro Discharge Machining of Nonconductive Ceramic: The Issue of Spalling. International Conference on Advanced Manufacturing Technology.

2015 20-22 Sep

Johor Bahru Malaysia

173 Ali, M. Y., Sulaiman, S., Mohamed, A. R., & Muataz, H. F. (2015). Minimum Quantity Lubrication in Microdrilling. International Conference on Advanced Manufacturing Technology.

2015 20-22 Sep


174

Atiqah, N., Ali, M. Y., Mohamed, A. R., & Hossein, M. S. (2014). Investigation of Surface Roughness and Material Removal Rate for High Speed Micro End Milling on PMMA. International Conference on Advances in Manufacturing and Materials Engineering.

2014 23-25 Sep


175

Asfana, B., Ali, M. Y., Mohamed, A.R. & Hung, W. N .P. Hung (2014). Investigation of MRR in Micro-EDM of Non-Conductive Ceramic. International Conference on Advances in Manufacturing and Materials Engineering.

2014 23-25 Sep


176

Sabur, A., Mehdi, S. M., Ali, M. Y., Maleque, M. A., & Moudood, A. (2014). Investigation of Surface Roughness in Micro-EDM of Nonconductive ZrO2 Ceramic with Powder Mixed Dielectric Fluid. International Conference on Advances in Manufacturing and Materials Engineering.

2014 23-25 Sep


177

Moudood, M. A., Sabur, A., Ali, M. Y., & Jaafar, I. H. (2014). Effect of Gap voltage and Pulse-On time on Material Removal Rate for Electrical Discharge Machining of Al2O3. International Conference on Advances in Manufacturing and Materials Engineering.

2014 23-25 Sep


178 Mohamed, A. R., Asfana, B., Ali, M. Y. (2013). Investigation of Recast Layer of Non-Conductive Ceramic due to Micro-EDM. 1st International Materials, Industrial, and Manufacturing Engineering Conference.

2013 4-5 Dec


179 Sabur, A., Moudood, M., Ali, M. Y., Maleque, M. A. (2013). Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive

2013 17-18 Dec

Putrajaya, Malaysia

of 23


E: Conference Presentation (Paper Published in Journal/Periodical) Date City, Country

ZrO2 Ceramic. 4th International Conference on Mechanical and Manufacturing Engineering.

180

Moudood, M. A., Sabur, A., Ali, M. Y., & Jaafar, I. H. (2013). Effect of Peak Current on Material Removal Rate for Electrical Discharge Machining of Non-conductive Al2O3 Ceramic. 1st International Materials, Industrial, and Manufacturing Engineering Conference.

2013 4-5 Dec


181

Ali, M. Y., Mohamed, A. R., Khan, A. A., Asfana, B., Lutfi, M. & Fahmi, M. I. (2012). Empirical Modelling of Vibration in Micro End Milling of PMMA. International Conference on Mathematical Applications in Engineering.

2012 3-5 July


182 Ali, M. Y., Liew, W. Y. H., Gure, S. A. & Asfana, B. (2012). Influence of Energy Parameters of Micro WEDM on Kerf. International Conference on Advances in Manufacturing and Materials Engineering.

2012 3-5 July


183

Al-Ghamdi, A. S., & Ali, M. Y. (2012). Mechanical Performance and Water Absorption Resistance of HIPS/MWCNTs Nanocomposite. International Conference on Advances in Manufacturing and Materials Engineering.

2012 3-5 July


184

Ali, M. Y., Atiqah, N. A. R., & Erniyati, M. A. (2011). Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Investigation of Material Removal Rate. International Conference on Manufacturing Science and Technology.

2011 8-11 Sep Singapore

185 Ghamdi, A. S., & Ali, M. Y. (2011). Rheological and Thermal Behaviour of High Impact Polystyrene Nanocomposite. International Conference on Manufacturing Science and Technology.

2011 8-11 Sep

Singapore

186

Ali, M. Y., Adesta, E. Y. T., Atiqah, N. A. R., & Erniyati, M. A. (2011). Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. International Conference on Materials and Manufacturing Technology.

2011 8-11 July

Xiamen China

187 Hajar, N. & Ali, M. Y. (2009). Investigation of Microholes Produced by Focused Ion Beam Micromachining. Advances in Materials Processing Technologies.

2009 26-29 Oct


188 Ali, M. Y. & Hajar, N. (2009). Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. Advances in Materials Processing Technologies.

2009 26-29 Oct


189

Ali, M. Y. Alif, O., Khairul, I. O., & Hung, W. N. P. (2009). Prediction of Burr Formation in Fabricating MEMS Components by Micro End Milling. International Conference on Materials for Advanced Technologies.

2009 28 Jun-03 Jul

Singapore

190

Ali, M. Y., Khan, A. A., Othman, K. I., & Omar, M. A. (2009). Micro End Milling ofAISI 304 Stainless Steel and Analysis of Micro Surface Roughness. International Conference on Mechanical and Electrical Technology.

2009 8-11 Aug

Beijing China.

191

Ali, M. Y., Rosfazila, M. R., & Rosnita, E. (2008). Geometrical Integrity of Microholes Drilled by Conventional and Micro Electrical Discharge Machining, International Conference on Advanced Design and Manufacture.

2008 14-16 Jan

Sanya China

192 Ali, M. Y. M. Alif, K. Irman, Hajar, N., & Hayati, N. (2008). Investigation of Burr Formation in Micro End Milling. The 1st International Conference on Science and Technology.

2008 12-13 Dec

Pulau Pinang Malaysia

193 Ali, M. Y., & Mehfuz, R. (2008). Investigation of Finish Cut of Micro Electro Discharge Milling for Nano Surface Finish. 1st International Conference on nanoManufacturing.

2008 13-16 July

Singapore

194 Hung, W. N. P., Agnihorti, M. M., Ali, M. Y., & Yuan, S. (2006). Molding of Three Dimensional Microcomponents. International Conference on Manufacturing Science and Engineering.

2006 8-11 Oct

Michigan USA

195 Ali, M.Y., Hung N. P. & Yuan, S. (2001). Surface Roughness of FIB Sputtered Silicon. 10th International Conference on Precision Engineering.

2001 18-20 July

Yokohama Japan

196 Hung, N. P., Ngothai, Y., Yuan, S., Lee, C. W., & Ali, M. Y. (2001). Micromolding of Three-Dimensional Components, 10th International Conference on Precision Engineering.

2001 18-20 July

Yokohama Japan

of 23


F: Invited/Keynote Speech Date Country

197 Distinguished Speaker: Global Engineering Education titled Malaysian Engineering Education and Accreditation. Sixth International Conference on Industrial Engineering and Operations Management.

8 Mar 2016 Malaysia

198 Engineering Programme Accreditation: Target & Assessment. United International University.

06 Jun 2015 Bangladesh

199 Accreditation and Assessment for Engineering Education. Dhaka University of Engineering & Technology.

31 May 2015 Bangladesh

200 Micro-Manufacturing Technology: The Huge Opportunity of Thinking Small. International Conference on Materials and Manufacturing Technology.

9 Jul 2011 China

201 Nanopillar Array for Cell Culture Dish. Dhaka University of Engineering and Technology.


202 Focused Ion Beam Nanomachining of Cell Culture Sheet. Islamic University of Technology.


203 Focused Ion Beam Machining of Cell Culture Dish: Asian Institute of Technology.

03 Mar 2008 Thailand

204

Focused Ion Beam Micromachining of MEMS. The 2nd International Symposium on Advanced Mechatronics Engineering, Organized by Industry Academy Institute Cooperation for Knowledge-Based Machinery Industry in Changwon National University.

29 Feb 2008 S. Korea

205 Atomic Force Microscopy for Characterization 4 Aug 2006 Malaysia 206 Micromilling Technology 3 Feb 2006 Malaysia

207 Photolithography for Microfabrication: the old technology with new importance

6 Jan 2006 Malaysia

208 Microinjection Molding: mass production process for microstructures 4 Aug 2005 Malaysia 209 Micro/Nano-Technology: huge opportunity in thinking small 30 Dec 2004 Malaysia

210 Micro Hot Embossing: -A Cost Saving Process for Fabrication of Microstructures

24 Dec 2004 Malaysia

G: Poster Presentation Award City, Country

211 Khan, A. A., Ndaliman, M. B., & Ali, M. Y. (2012). Development of Green Compacted EDM Electrodes from Copper and Tantalum Carbide Powders. IIUM Research, Invention and Innovation Exhibition (IRIIE).

Silver IIUM

Malaysia

212 Ndaliman, M. B., Khan, A. A. & Ali, M. Y. (2012). Surface Modification of Titanium Alloy using Electrical Discharge Machining Process. IIUM Research, Invention and Innovation Exhibition (IRIIE).

Silver IIUM

Malaysia

213 Ali, M. Y., Zain, M. Z., Khan, A. A., & Ndaliman, M. B. (2012). Influence of TaC Powder Additive on Electrical Discharge Machining of Stainless Steel. IIUM Research, Invention and Innovation Exhibition (IRIIE).

-- IIUM

Malaysia

214 Ali, M. Y., & Hajar, N. (2011). Fabrication of Micropillar Sheet for Cell Culture Dish. Invention and Innovation Award, Malaysian Technology Expo (MTE)

Bronze

215 Ali, M. Y., & Hajar, N. (2011). Fabrication of Micropillar Sheet for Cell Culture Dish. IIUM Research, Invention and Innovation Exhibition (IRIIE).

Gold IIUM

Malaysia

216 Ali M. Y., Hamizah, S., & Adila, M. (2011). Minimum Chip Thickness in Machining MEMS Structure Using Tool Based Micromilling. IIUM Research, Invention and Innovation Exhibition (IRIIE).

Bronze IIUM Malaysia

217 Reyad M., & Ali, M. Y. (2007). Design and Fabrication of Micro Swiss-roll Combustor Mold by Micro EDM Milling. Kulliyyah of Engineering Research and Innovation Exhibition (KERIE).

Bronze KoE, IIUM Malaysia

218 Amar, S. M., & Ali, M. Y. (2006). Polymeric Micro-Fluidic Channel by Hot Embossing. Kulliyyah of Engineering Research and Innovation Exhibition (KERIE).

-- KoE, IIUM Malaysia

H: Newsletter Date City, Country

219 Ali, M. Y. (2011). Focused Ion Beam Nanomachining of Cell Culture Sheet: Islamic University of Technology. May-June

Gazipur Bangladesh

of 23


H: Newsletter Date City, Country

220 Ali, M. Y. (2008). Focused Ion Beam Machining of Cell Culture Dish. AIT e-Bulletine, 4 (9), 3-4.

Feb Bangkok Thailand

221 Ali, M. Y. Sivakumar N. R., & Ngoi, B. K. A. (2004). Regional Hub for Nanotech. NTU News, (51), 2-2.

Jan-Mar Singapore

222 Ali, M. Y., & Ngoi, B. K. A. (2003). Mass-Replication of Micro-Components. NTU Forward, 6-6.

Dec Singapore

I: Selected Research Report Reference IHL/Ministry

223 Modelling of Vibration and System Parameters for Stability in Micro End Milling: A Noble Approach (2012-2015)

FRGS 12-074-0223

MOHE

224 Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid (2012-2014)

03-01-08-SF0135 MOSTI

225 Electrodischarge Machining of Nonconductive Ceramic Materials (2011-2013)

EDW B11-085-0563

IIUM

226 Powder Mixed Micro Electro Discharge Machining (PMµEDM) (2-11-2012)

EDW A11-071-0862

IIUM

227 Noble Tool Based Micromilling for Nanometric Surface Finish (2007-2010)

FRGS 0207-44 MOHE

228 Focused Ion Beam Machining for Nanopillar Sheet (2008-2010) EDW B 0803-99 IIUM

229 Development of Micro-End Milling Process for Fabricating MEMS (2007-2009)

IFRG 0701-06 MOHE

230 Microdrilling of Metallic Materials for Microsystems Technology (2006-2007)

EDW 18 IIUM

231 Geometrical Integrity of Micro-holes Produced by Micro-EDM (2006-2007)

EDW 17 IIUM

232 Fabrication of Microcomponents by Micro Hot Embossing (2005-2007) LT-35 IIUM

J: Academic Thesis/Dissertation Study Level IHL

233 Mohammad Yeakub Ali (2002) Ion Beam Micromachining of Crystalline Solids

PhD. School of Mechanical & Production Eng.

Nanyang Tech. Univ., Singapore

234 Mohammad Yeakub Ali (1997) Knowledge Base Development for Stretch Blow Molding M.Eng

School of Advanced Technologies Asian Institute of Tech., Thailand

235 Mohammad Yeakub Ali (1992) Recycling of Waste Plastic Product

BSc.Eng Mechanical Engineering

Bangladesh Univ. Eng. & Tech., Dhaka

K: Patent Title Year Author Reference

236 Fabrication of Micropillar Sheet for Cell Culture Dish. Applied for Patent. 2012 Ali M. Y. & Hajar, N.

IIUM/504/IC/14/9/1/MTE17

of 23

18 november 2002 - international islamic university malaysiastaff.iium.edu.my/mmyali/?download=cv...

Documents