18502589 h1 plafond uk -...

18502589 HFDST 1 Plafond-, wand- en vloerbeugels_UK

C E I L I N G , W A L L A N D F L O O R C L I P S

Edition 2007 / UK

BSA

BSF-D

KB

BK

BMA

��

��1

Flamco Ceiling, Wall and Floor Clips


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps

P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.2

��

C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s

Click here for the Flamco BS clip which fits e very type of pipeFlamco offers you a wide range of BS clips for all types of pipe.

That applies to the range of clips from 12 mm to 16 plus the countless

connection options from M 8 - M 12, ‘combinut’, and 1/2.

It also applies in relation to the various types of

rubber for special applications.

BSA clips are available with a large number of different connections.

The advantages of

Flamco BSA clips:

◆ Patented locking system ensures

rapid assembly.

◆ Minimal headroom requirement

permits pipes to be installed

directly under the ceiling.

◆ Stout clip material ensures both

stability and rigidity.

◆ Rubber inlay with four air chambers

for substantial noise reduction

(19 dB(A).

◆ Rubber inlay clamped to the clip.

Should the pipe move in any way,

the rubber will not be displaced:

it will remain fi rm at all times.

◆ High temperature resistance of the

rubber: from - 40 °C to + 120 °C.

The mounting nut has a combined groove /cross-head.

The click-in spring for easy pre-assembly without the need for tools and without the pipe coming away from the clip.

Table with types and technical information: page 1.10 – 1.16. See also the BSL-A (page 7.3) and the BRS-A (page 9.3).

Flamco R rail and accessories: pages 6.2 – 6.5.

FSS ClickFit: page 6.4.

RD rail end caps: page 6.2.

D threaded rods: page 8.7.

Rigid or fl exible clips: pages 8.2 – 8.5.

BSA

Flamco BS clips have a universal fi tting.

It is possible to mount these clips both

vertically and horizontally.


Ce

iling

, Wa

ll an

d F

loo

r Clip

s

P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.3P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.3P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.3

Click here for the Flamco BS clip which fits e very type of pipe

BSA-S

Extra BSA-S feature:

◆ Fitted with special heat

resistant rubber: resistant

from – 60 °C to + 250 °C.

Extra BSA-N feature:

◆ Fitted with fl ame retardant

rubber which does not drip or

melt, guaranteeing a long and

safe service life.

Flamco BSI

◆ Fitted with noise suppressing

rubber lining.

◆ Reinforcing grooves maintain

lining shape.

◆ Fitted with combination

M 8 / M 10 connection.

◆ Suitable for installations with

restricted space; bolt features

screw-cross-head.

◆ Fitted with two bolts with anti-

loss ring.

Flamco BSB

◆ One-piece clip with noise

suppressing rubber lining.

◆ Fitted with M 8 thread

connection.

◆ Available in diameters from 1/8 to 2

◆ Quick-locking system.

◆ Suitable for installations

with restricted space; bolt

features screw-cross-head.

BSA-N BSA-G CLICKIN BSA

BSI BSB

Extra BSA-G feature:

◆ Fitted with smooth rubber for

attaching around plastic pipe.

◆ Spacer in the click-in spring

lock prevents over-tightening of

the clip.

Extra ClickIn BSA features:

◆ Part of the Flamco Smart

System: page 5.5.

◆ No more de-burring of the

threaded rod.

◆ Insert threaded end in nut;

do not screw.

◆ Twist the clip to the correct

position.

◆ Fitted in no time!

◆ Patented system.

RWA-G, RWB-G and

RWC-G

◆ Clips fi tted with noise-

reducing EPDM rubber

insert.

◆ RWA-G clips complete

with screws and nuts.

RWB-G and RWC-G clips

fi tted with six-sided bolts

with saw slot.

◆ RWC-G clips with M 10

connection.

RWA-G

Flamco BSH

◆ Fitted with noise suppressing

rubber lining.

◆ Reinforcing grooves maintain

lining shape.

◆ Fitted with combination


◆ Suitable for installations with

restricted space; bolt features

screw-cross-head.

◆ Quick-locking system.

BSH


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


BS clips without rubber lining and other types of clips for numerous fixing options

BSF

On these pages we show you a number of other mounting options. First of all,

the BSF and BSU clips for universal fitting. The BSF and BSF-D clips are

characterised by a wide range of sizes from 3/8 to 16 in combination with a

possibility of very close-fitting sizes. The BSU clip, with its range from 1/2 to 6 similarly offers close-fitting versions.

The advantages of

Flamco BSF clips:

◆ For horizontal mounting to

the wall or for vertical

mounting beneath the ceiling.

◆ Suitable for confi ned spaces.

◆ Suitable for heavy loads and

high temperatures.

◆ BSF clips in M 10, M 12,

M 16 and 1/2 versions, fi tted

with anti-loss ring.

◆ Range from 3/8 to 16.

Table with types and technical information: page 1.17 – 1.25. See also the BSG (page 4.2), BRS (page 9.3) and BSL clips (page 7.2).

Flamco R rail and accessories: pages 6.2 – 6.5.

RD rail end caps: page 6.2.

Locknut:page 6.3.

Washers: page 6.3.

Threaded rods: page 8.7.

BSF clip for universal mounting.

Flamco offers the best clip ideal fi xing for every requirement.

BSF-D


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


BS clips without rubber lining and other types of clips for numerous fixing options

BSU

BSF-D

KB

PC

VARIOFIT KS

BSP fixed point clips

◆ Suitable for fixed-point

constructions such as

in combination with the

VH connecting corners

(page 6.5 and 6.10) or the

VG angular plate (page

8.3 and 8.9).

◆ Suitable for very high

loads.

◆ With extra long lugs for

fixing.

KB clips

◆ Suitable for fixed point

constructions.

◆ Suitable for very high

loads.

◆ According to DIN 3567.

◆ Specially intended for

mounting heavy pipes

e.g. rising mains.

PC plug clip

◆ For use with floor-

heating and plastic

pipes.

◆ For simple mounting on

the floor.

Variofit plastic clips

◆ For mounting copper or

thin-walled steel pipes.

Can be used with Flamco

rail R1, R 2, R 3 and R 4.

◆ Hinged click connections

and equal centre to wall

distances for the Variofit

12 - 15 and 22 - 28.

KS clips

◆ For horizontal or vertical

fitting of copper pipes.

◆ Single and double

versions.

◆ Fast mounting.

◆ High-quality polypropy-

lene material provides

excellent noise damping.

◆ Available in white or

chrome-finish.

Extra BSF-D feature:

◆ The BSF-D has an

additional lower nut to

permit further clips to

be installed beneath,

(subject to overall design

loads).

RWA, RWB and RWC clips

◆ RWA clips complete with

screws and nuts.

◆ RWB and RWC clips fitted

with six-sided bolts with

saw slot.

◆ RWC clips with M 10

connection.

Omega clips

◆ Basic version, particu-

larly suitable for flush

fitting to walls.

◆ Fast and easy fitting.

UB clips

◆ Heavy-duty clip for

mounting steel pipes

directly to Flamco rail

or other surfaces.

◆ Threaded connection

from M 6 to M 16.

◆ Supplied complete with

4 nuts.

RWA OMEGA UB

Fitted with brass

mounting nut,

c. 5 mm adjustable.

Flamco BSU

◆ For horizontal mounting

to the wall or for vertical

mounting beneath the

ceiling.

◆ Reinforcing grooves

maintain lining shape.

◆ Fitted with either combi-

nation M 8 / M 10 or


◆ Suitable for installations

with restricted space;

bolt features screw-

cross-head.

BSP


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps

P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.6 C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s

FlamcoAnd that’s not all! See what other benefits the BK series offers!

1. Manually open the

clip and place it

around the pipe.

2. Close the clip

around the pipe

and the ball joint.

3. Now slide the sleeve

downwards and ...

Ready!

The advantages of

the Flamco BK clip series:

◆ The one-piece clip can withstand

a very high load.

◆ The integral ball and socket design

compensates for any movement

or expansion in the pipe.

◆ Up to 12º of movement.

◆ The length of the sleeve permits

insulation of the pipe without

restriction to the ball joint.

Assembly without any tools

The ball joint offers movement of maximum 2 x 6° and thus makes an additional ball hanger on the clip unnecessary. It also requires none, or fewer, fi xed points.

Table with types and technical information: page 1.26 – 1.31. See also the support half ST (page 8.6).

Ball hanger:page 8.2 - 8.3.

Threaded rod:page 8.7.

Cap for sealing the ball joint: page 1.7.

BKI clip with rubber lining: page 1.7.

BO / BOK connectors for mounting BK clips beneath one another: page 1.7.

Support half: page 8.6.

Rail end cap for a neat fi nish:

page 6.2.

Flamco rail in black or galvanised:

page 6.2 - 6.3.

FSS ClickEasy: page 5.5.

All BK series pipe hangers are quickly and eas ily fitted without tools


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


BK

SOCKET T

BKI BKK BKP BKR

BO / BOK BSC LB SR

Additional

characteristics of BK:

◆ For mounting threaded

pipe, sprinkler pipe and

thin-walled steel pipe.

◆ Sendzimir clip

(BK 12 electrolytically

zinc-plated).

Additional characteristics

of BKI:

◆ Supplied with a noise

suppressing rubber

lining.

◆ For pipe sizes greater

than 219.1 mm,

a BK clip can be used

with a separate rubber

lining strip SR.

◆ Sendzimir clip

(BK 12 electrolytically

zinc-plated).


of BKK:

◆ For mounting copper

pipe work.

◆ Clip copper. Sleeve and

ball joint electrolytically

zinc-plated.


of BKP:

◆ For mounting plastic

pipe work.

◆ Sendzimir clip.


of BKR:

◆ For mounting cast-

iron sewage piping.

◆ Clip up to 8 x 125

sendzimir, larger

sizes electrolytically

zinc-plated.

◆ From BKR 8 x 150

with a clamp on the

inside of the sleeve.

T Cap

◆ Water and dust tight

sealing of the ball joint

which guarantees

freedom of movement.

◆ Holds the sleeve

firmly allowing both

hands to be free

for assembling.

Connector BO / BOK

◆ For mounting certain

BK seriesclips beneath

one another whilst

maintaining the

flexibility

of the

suspension.

BSC clips

◆ Suitable for mounting to

the ceiling and to (rail)

constructions.

◆ The one-piece clip can

withstand a very high

load.

◆ Mounting with EB 25 or

EB 18.

Mounting tape LB

◆ The plastic covering is

stuck to the steel core,

so that it cannot slide.

◆ Simply cut to the right

length.

◆ High mechanical tension

and can be fitted easily

and quickly.

Noise suppression

strips SR

◆ Noise suppressing

lining for clips.

◆ When the SR strip is

used the associated

clip chosen must be

larger than the out-

side diameter of the

pipe to be fitted.

EB

All BK series pipe hangers are quickly and eas ily fitted without tools


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


BM and DP clips give you a perfect mounting and a smooth finishFlamco BM clips are made up of three parts, namely the one-piece clip,

the sleeve, and a nut. The sleeve has three characteristics. The leading

edge is fl ared to permit easy location. The trailing edge is domed and acts

as a travel stop for the nut. Finally, its overall conical shape ensure secure

fi xture. Thanks to these technical features, BM clips are very easy to mount

correctly.

DP double pipe clips.

Version hk with short wood screw and plastic plug.

BMA clip with rubber lining.

Flamco rail in black or galvanised: page 6.2 - 6.3.

Hammer head bolt set: page 6.3.

This is how easy it is to mount the Flamco BM clip

Fit wood screw.

Open clip and bend it round the pipe.

Push on sleeve.

Tighten nut and ... Ready!

1

2

3

4

BM wall clips are available

in three versions

Without wood screw. To connect to rail

with hammer head bolt set, threaded

tube, or an insert pin.

With short wood screw and

plastic plug.

Fitted with a long wood

screw and plastic plus.

Execution su

Execution hk

Execution hl

1

The advantages of

Flamco BM clips:

◆ The one-piece clip can

withstand a very high load.

◆ Threaded wood screw with torx

connection so that these can

be screwed with a hand drill.

◆ The clip covers the screws so

that they are hidden from sight.

◆ Perfect fi nish and rigid

mounting. Allows the pipe

to expand.

BMK clip for copper pipes.

Table with types and technical information: page 1.32 - 1.35. See also clips for rain drainage (page 4.2 - 4.4).


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


BM and DP clips give you a perfect mounting and a smooth finish

2 3 4

BM

DP WITH L INING

BMA BMK

DP SINGLE DP DOUBLE PIPE SUPPORT

Additional characteristics of BM:

◆ For mounting threaded pipe,

sprinkler pipe and thin-walled

steel pipe.

◆ Clip sendzimir, other parts

electrolytically zinc-plated.

Additional characteristics of BMA:

◆ Supplied with a noise suppressing

rubber lining.

◆ For mounting threaded pipe,

sprinkler pipe, thin-walled steel

and copper pipe.

RWK, RWK-G and RWS clips

◆ Particularly suitable for visible

wall mounting with wire tack

(diameter 8 mm).

◆ RWK-G fitted with noise-

reducing EPDM rubber insert

for temperatures from

– 40 °C to + 120 °C.

◆ With six-sided nut with saw

slot for quick and easy fitting.

RWS with two six-sided nuts

with saw slot.

DP single pipe clip

◆ For mounting (thin-walled) steel

pipes.

◆ Adjustable depth.

◆ Loosening or tightening the

bolt is possible with spanner or

screwdriver.

DP double pipe clips


pipes.

◆ Adjustable depth, fixed pipe

centres.

◆ Supplied with a reinforced

backplate with a slot of

18 x 8 mm.

Angle support

◆ DP double pipe clips can be

mounted from the floor at three

different centres.

◆ Slots 30 x 6.5 mm for mounting

the DP double pipe clip.

◆ Slots 20 x 8.5 mm for mounting

to the floor.

DP double pipe clips with lining


pipes.

◆ Fitted with a sound suppres-

sing grey neoprene lining that is

glued in the clip.

◆ Adjustable depth, fixed pipe

centres.

Additional characteristics of BMK:

◆ For mounting copper pipe work.

◆ Clip sendzimir, other parts

electrolytically zinc-plated.

RWS

RWK


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��

C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s C e i l i n g , Wa l l a n d F l o o r C l i p s

Flamco BSA clips for all types of pipes and Flamco BSA-S clips with temperature resistant rubber

◆ Fast assembly thanks to the patented locking system with click-spring.

◆ Easy pre-assembly without the need for tools and without the pipe coming away from

the clip.

◆ Minimal headroom requirement making it possible to mount pipes directly to the ceiling.

◆ Stout material ensures stability and rigidity.

◆ BSA-S fitted with special heat resistant rubber: resistant from – 60 °C to + 250 °C.

Types and dimensions BSA cl ipsType Ext. dia.

of pipefrom - to

Threadedtubedia.

Threaded connection Max.working

load

Max. wor-king load* 19 dB(A)

Stripdimen-sions

Code number

in mm in inches M 8 M 10 M 8/10 M 12 M 16 1/2 1/2 / M 10 in N in N in mm M 8 M 10 M 8/10 M 12 M 16 1/2 1/2 M 10

Types and dimensions BSA-S clipsType Ext. dia.

of pipefrom - to

Threadedtubedia.

Threadedconnection

Max.working

load

Max. wor-king load*19 dB(A)

Stripdimensions

Codenumber

in mm in inches in N in N in mm

BSA 12 - 13.5 12 - 13.5 1/4 M 8 - M 8/10 - - - 1/2 / M 10 1300 600 25 x 1.75 39200 - 39300 - - - 51900BSA 14 - 16 14 - 16 - M 8 - M 8/10 - - - 1/2 / M 10 1300 600 25 x 1.75 39201 - 39301 - - 51901BSA 17 - 19 17 - 19 3/8 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39202 - 39302 39272 - 39222 51902BSA 20 - 24 20 - 24 1/2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39203 - 39303 39273 - 39223 51903BSA 25 - 28 25 - 28 3/4 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39204 - 39304 39274 - 39224 51904BSA 29 - 33 29 - 33 - M 8 - M 8/10 - - - 1/2 / M 10 1300 600 25 x 1.75 39205 - 39305 - - 51905BSA 33 - 37 33 - 37 1 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39206 - 39306 39276 - 39226 51906BSA 38 - 42 38 - 42 11/4 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39207 - 39307 39277 - 39227 51907BSA 44.5 - 49 44.5 - 49 11/2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39208 - 39308 39278 - 39228 51908BSA 50 - 54 50 - 54 - M 8 - M 8/10 M 12 - - 1/2 / M 10 1300 600 25 x 1.75 39209 - 39309 39279 - - 51909BSA 56 - 60 56 - 60 2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 1300 600 25 x 1.75 39210 - 39310 39280 - 39230 51910BSA 62 - 64 62 - 64 - M 8 - M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 39550 - 39311 39231 - 51920BSA 68 - 73 68 - 73 - M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39551 - 39312 39232 - 39351 51921BSA 75 - 80 75 - 80 21/2 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39552 - 39313 39233 - 39352 51922BSA 82 - 86 82 - 86 - M 8 - M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 39553 - 39314 39235 - 51923BSA 89 - 91 89 - 91 3 M 8 - M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39554 - 39315 39236 - 39354 51924BSA 95 - 102 95 - 102 31/2 M 8 - M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 39556 - 39317 39237 - 51926BSA 108 - 116 108 - 116 4 M 8 M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 39558 39557 39318 39238 - 39356 51927BSA 121 - 127 121 - 127 - - M 10 M 8/10 M 12 - - 1/2 / M 10 2000 1200 25 x 2.75 - 39559 39320 39240 - 51929BSA 133 - 141 133 - 141 5 - M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 - 39560 39321 39241 - 39360 51930BSA 159 - 162 159 - 162 - - M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 - 39562 39323 39243 - 39361 51932BSA 165 - 168 165 - 168 6 - M 10 M 8/10 M 12 - 1/2 1/2 / M 10 2000 1200 25 x 2.75 - 39563 39324 39244 - 39362 51933BSA 213 - 219 213 - 219 8 - - - - M 16 - - 3000 1200 25 x 3 - - - - 39253 - -BSA 267 - 273 267 - 273 10 - - - - M 16 - - 9000 3000 50 x 5 - - - - 39254 - -BSA 315 - 321 315 - 321 12 - - - - M 16 - - 9000 4000 50 x 5 - - - - 39255 - -BSA 350 - 356 350 - 356 14 - - - - M 16 - - 9000 5000 50 x 5 - - - - 39256 - -BSA 400 - 406 400 - 406 16 - - - - M 16 - - 9000 6000 50 x 5 - - - - 39257 - -

BSA-S 12 - 13.5 12 - 13.5 1/4 M 8 1300 600 25 x 1.75 39110BSA-S 14 - 16 14 - 16 - M 8 1300 600 25 x 1.75 39111BSA-S 17 - 19 17 - 19 3/8 M 8 1300 600 25 x 1.75 39112BSA-S 20 - 24 20 - 24 1/2 M 8 1300 600 25 x 1.75 39113BSA-S 25 - 28 25 - 28 3/4 M 8 1300 600 25 x 1.75 39114BSA-S 29 - 33 29 - 33 - M 8 1300 600 25 x 1.75 39115BSA-S 33 - 37 33 - 37 1 M 8 1300 600 25 x 1.75 39116BSA-S 38 - 42 38 - 42 11/4 M 8 1300 600 25 x 1.75 39117BSA-S 44.5 - 49 44.5 - 49 11/2 M 8 1300 600 25 x 1.75 39118BSA-S 50 - 54 50 - 54 - M 8 1300 600 25 x 1.75 39119BSA-S 56 - 60 56 - 60 2 M 8 1300 600 25 x 1.75 39120BSA-S 62 - 64 62 - 64 - M 8 2000 1200 25 x 2.75 39565BSA-S 68 - 73 68 - 73 - M 8 2000 1200 25 x 2.75 39566BSA-S 75 - 80 75 - 80 21/2 M 8 2000 1200 25 x 2.75 39567BSA-S 82 - 86 82 - 86 - M 8 2000 1200 25 x 2.75 39568BSA-S 89 - 91 89 - 91 3 M 8 2000 1200 25 x 2.75 39569BSA-S 95 - 102 95 - 102 31/2 M 8 2000 1200 25 x 2.75 39570BSA-S 108 - 116 108 - 116 4 M 10 2000 1200 25 x 2.75 39571BSA-S 121 - 127 121 - 127 - M 10 2000 1200 25 x 2.75 39572BSA-S 133 - 141 133 - 141 5 M 10 2000 1200 25 x 2.75 39573BSA-S 159 - 162 159 - 162 - M 10 2000 1200 25 x 2.75 39574BSA-S 165 - 168 165 - 168 6 M 10 2000 1200 25 x 2.75 39575

* To achieve good sound suppression do not overload the fi tting.


BSA/BSA-S 12-13,5 - 56-60

BSA/BSA-S 62-64 - 400-406


Ce

iling

, Wa

ll an

d F

loo

r Clip

s

P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11P I P E S U P P O R T S Y S T E M C e i l i n g , Wa l l a n d F l o o r C l i p s 1.11

�� Flamco BSA-N clips with flame retardant rubber (neoprene) and BSA-G clips with smooth rubber for plastic pipes

◆ BSA-N clips are fitted with flame retardant rubber which does not drip or melt,

ensuring a long and safe service life.

◆ Fitted with smooth rubber for attaching around a plastic pipe.

◆ Spacer in the click-in spring lock prevents over-tightening of the BSA-G clip.

Types and dimensions BSA-N cl ips Type Ext. dia

of pipefrom - to

Threadedtube dia.

Threadedconnection

Max. working load

Max. workingload*

19 dB(A)

Stripdimensions

Codenumber

in mm in inches in N in N in mm

Types and dimensions BSA-G cl ips Type Pipe size

ext. dia.Threaded

connectionMax.

workingload

Stripdimensions

Codenumber

in mm in N in mm

BSA-N 12 - 13.5 12 - 13.5 1/4 M 8 1300 600 25 x 1.75 39130BSA-N 14 - 16 14 - 16 - M 8 1300 600 25 x 1.75 39131BSA-N 17 - 19 17 - 19 3/8 M 8 1300 600 25 x 1.75 39132BSA-N 20 - 24 20 - 24 1/2 M 8 1300 600 25 x 1.75 39133BSA-N 25 - 28 25 - 28 3/4 M 8 1300 600 25 x 1.75 39134BSA-N 29 - 33 29 - 33 - M 8 1300 600 25 x 1.75 39135BSA-N 33 - 37 33 - 37 1 M 8 1300 600 25 x 1.75 39136BSA-N 38 - 42 38 - 42 11/4 M 8 1300 600 25 x 1.75 39137BSA-N 44.5 - 49 44.5 - 49 11/2 M 8 1300 600 25 x 1.75 39138BSA-N 50 - 54 50 - 54 - M 8 1300 600 25 x 1.75 39139BSA-N 56 - 60 56 - 60 2 M 8 1300 600 25 x 1.75 39140BSA-N 62 - 64 62 - 64 - M 8 2000 1200 25 x 2.75 39578BSA-N 68 - 73 68 - 73 - M 8 2000 1200 25 x 2.75 39579BSA-N 75 - 80 75 - 80 21/2 M 8 2000 1200 25 x 2.75 39580BSA-N 82 - 86 82 - 86 - M 8 2000 1200 25 x 2.75 39581BSA-N 89 - 91 89 - 91 3 M 8 2000 1200 25 x 2.75 39582BSA-N 95 - 102 95 - 102 31/2 M 8 2000 1200 25 x 2.75 39583BSA-N 108 - 116 108 - 116 4 M 10 2000 1200 25 x 2.75 39584BSA-N 121 - 127 121 - 127 - M 10 2000 1200 25 x 2.75 39585BSA-N 133 - 141 133 - 141 5 M 10 2000 1200 25 x 2.75 39586BSA-N 159 - 162 159 - 162 - M 10 2000 1200 25 x 2.75 39587BSA-N 165 - 168 165 - 168 6 M 10 2000 1200 25 x 2.75 39588

* To achieve good sound suppression do not overload the fi tting!

BSA-N

BSA-G

BSA-G 16 16 M 8 1300 25 x 1.75 39151BSA-G 20 20 M 8 1300 25 x 1.75 39153BSA-G 25 25 M 8 1300 25 x 1.75 39154BSA-G 32 32 M 8 1300 25 x 1.75 39155BSA-G 40 40 M 8 1300 25 x 1.75 39157BSA-G 50 50 M 8 1300 25 x 1.75 39158BSA-G 56 56 M 8 1300 25 x 1.75 39159BSA-G 63 63 M 8 1300 25 x 1.75 39160BSA-G 75 75 M 8 2000 25 x 2.75 39590BSA-G 90 90 M 8 2000 25 x 2.75 39593BSA-G 110 110 M 10 2000 25 x 2.75 39595BSA-G 125 125 M 10 2000 25 x 2.75 39596BSA-G 160 160 M 10 2000 25 x 2.75 39598


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


Selection table for BSA, BSA-S and BSA-N clips

◆ Using the table below, you can easily find the right type of BSA, BSA-S,

or BSA-N clip for the type and dimension of pipes you require.

Select ion table for BSA, BSA-S and BSA-N cl ipsType Threaded tube

DIN 2240/2441

Fire tubeDIN 2448/2458

2460/2461

Copperpipe

DIN 1786

ML pipeSML pipeDIN 19522

LORO X

nom.dia.

in inchesext. dia.in mm

nom.dia.

in mmext. dia.in mm

ext. dia.in mm

nom.dia.

in mmext. dia.in mm

nom.dia.

in mmext. dia.in mm

12.5 - 13.5 1/4 13.5 - 13.5 12 - - - - 14.5 - 16.5 - - - 16.5 15 - - - - 17.5 - 19.5 3/8 17.2 10 17.2 18 - - - - 20.5 - 24.5 1/2 21.3 15 20.5 22 - - - - - - 15 21.3 - - - - - 25.5 - 28.5 3/4 26.9 20 25.5 28 - - - - - - 20 26.9 - - - - - 29.5 - 33.5 - - 25 30.5 - - - - - - - - 31.8 - - - - - 33.5 - 37.5 1 33.7 25 33.7 35 - - - - 38.5 - 42.5 11/4 42.4 32 38.5 42 - - 40 42 - - 32 42.4 - - - - - 44.5 - 49.5 11/2 48.3 40 44.5 48 - - - - - - 40 48.3 - - - - - 50.5 - 54.5 - - - 51.5 54 - - 50 53 56.5 - 60.5 2 60.3 50 57.5 - 50 58 - - - - 50 60.3 - - - - - 62.5 - 64.5 - - - 63.5 64 - - - - 68.5 - 73.5 - - - 70.5 68 - - 70 73 - - - - 70 - - - - 75.5 - 80.5 21/2 76.1 65 76.1 76 70 78 - - - - - - 80 - - - - 82.5 - 86.5 - - - 82.5 85 - - - - 89.5 - 91.5 3 88.9 80 88.9 89 - - 80 89 95.5 - 102.5 31/2 - - 95.5 100 - - 100 102 - - - 101.6 - - - - -108.5 - 116.5 4 114.3 100 108.5 108 100 110 - - - - 100 114.3 - - - - -121.5 - 127.5 - - - 121.5 - - - - - - - - 127.5 - - - - -133.5 - 141.5 5 139.7 125 133.5 133 125 135 125 133 - - 125 139.7 - - - - -159.5 - 162.5 - - 150 159.5 159 150 160 150 159165.5 - 168.5 6 165.1 150 165.1 - - - - - - - - 168.3 - - - - -


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� Selection table for BSA, BSA-S and BSA-N clips

◆ Using the table below you can easily find the right type of BSA, BSA-S,

or BSA-N clip for the type and dimension of pipes you require.

Select ion table for BSA, BSA-S and BSA-N cl ipsType PVC pipe PE pipe

GeberitWicu Specialcopper pipe

Wicu Extracopper pipe

Thin-walledsteel pipeDIN 2391

Vulcathene

ext. dia.in mm

ext. dia.in mm

wallthickness

in mmext. dia.in mm

wallthickness

in mmext. dia.in mm

ext. diain mm

ext. dia.in mm

12.5 - 13.5 12 - 8 x 1.5 12 - - - 12 14.5 - 16.5 16 - 10 x 1.5 14 - - 16 16 - - 12 x 1.5 16 - - - - 17.5 - 19.5 20 20 15 x 1.5 19 - - 18 - 20.5 - 24.5 - - 18 x 1.5 23 - - 20 20 25 25 - - - - 22 - 25.5 - 28.5 - - 22 x 1.5 27 12 x 1.5 26 25 25 32 32 - - - - 28 - 29.5 - 33.5 - - 28 x 1.5 33 15 x 1.5 29 30 32 - - - - 18 x 1.5 32 32 - 33.5 - 37.5 - - - - 12 x 1.5 33 5 - - - - - 15 x 1.5 37 - - 38.5 - 42.5 40 40 35 x 1.5 40 18 x 1.5 41 38 40 - - - - - - 40 - 44.5 - 49.5 - - 42 x 1.5 48 22 x 1.5 46 45 - - - - - - - 48 - 50.5 - 54.5 50 50 - - - - 50 50 56.5 - 60.5 - 56 54 x 2.5 60 - - 55 - - - - - - - 60 - 62.5 - 64.5 63 63 - - 28 x 1.5 64 63 63 68.5 - 73.5 - - - - 35 x 1.5 72 70 - 75.5 - 80.5 75 75 - - - - 80 75 82.5 - 86.5 - - - - - - - - 89.5 - 91.5 90 90 - - 42 x 1.5 91 90 90 95.5 - 102.5 - - - - - - 100 -108.5 - 116.5 110 110 - - 54 x 2.5 116 110 110121.5 - 127.5 125 125 - - - - 120 125133.5 - 141.5 - - - - - - - -159.5 - 162.5 160 160 - - - - - 160165.5 - 168.5 - - - - - - - -


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


Flamco BSB clips with quick locking system

◆ The BSB clip is a single-part clip with noise suppressing rubber inlay.

◆ Suitable for confined spaces; bolt features screw-cross-head.

◆ Fitted with quick-locking system.

Types and dimensions BSA cl ipsType Ext. dia.

of pipefrom - to

Threaded connection

Max.working load

Max.working load **

16 dB(A)

Strip dimensions

Codenumber

in mm in N in N in mm

Types and dimensions BSB cl ipsType Threaded tube

DIN2440/2441

Fire tubeDIN

2448/24582460/2461

Copperpipe

DIN 1786

Wicu Specialcopper pipe

Thin-walledsteelpipe

DIN 2391nom.dia.


nom.dia.

in mmext. dia.in mm

ext. dia.in mm

wall thickness

in mmext. dia.in mm

ext. dia.in mm

BSB 8 x 1/8 - 10 1/8 10.2 - 10.2 - - - -BSB 8 x 1/4 - 12 1/4 13.5 - 13.5 12 8 x 1 12 -BSB 8 x 15 - - - - 15 10 x 1 14 16 - - - - - 12 x 1 16 -BSB 8 x 3/8 - 18 3/8 17.2 10 17.2 18 15 x 1 19 18BSB 8 x 1/2 - 22 1/2 21.3 15 20.2 22 18 x 1 23 20 - - 15 21.3 - - - 22BSB 8 x 3/4 - 28 3/4 26.9 20 26.9 28 22 x 1 27 28BSB 8 x 1 - 35 1 33.7 25 33.7 35 - - 35BSB 8 x 11/4 - 42 11/4 42.4 32 42.4 42 - - -BSB 8 x 11/2 - 48 11/2 48.3 40 48.3 48 42 x 1.5 48 48BSB 8 x 54 - - - - 54 - - -BSB 8 x 2 - 60 2 60.3 50 60.3 - 54 x 2 60 60

BSB 8 x 1/8 - 10 9 - 10 M 8 650 40 18 x 1.0 39610BSB 8 x 1/4 - 12 11 - 13 M 8 650 40 18 x 1.0 39612BSB 8 x 15 14 - 16 M 8 650 40 18 x 1.0 39615BSB 8 x 3/8 - 18 17 - 20 M 8 650 40 18 x 1.0 39600BSB 8 x 1/2 - 22 21 - 24 M 8 650 60 18 x 1.0 39601BSB 8 x 3/4 - 28 26 - 29 M 8 650 80 18 x 1.0 39602BSB 8 x 1 - 35 33 - 36 M 8 650 120 18 x 1.0 39603BSB 8 x 11/4 - 42 41 - 44 M 8 650 160 18 x 1.0 39604BSB 8 x 11/2 - 48 47 - 50 M 8 650 200 18 x 1.0 39605BSB 8 x 54 53 - 56 M 8 650 250 18 x 1.0 39654BSB 8 x 2 - 60 60 - 62 M 8 650 300 18 x 1.0 39606


BSB


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� Flamco BSH clips with quick-locking system and BSI clips with anti-loss ring

◆ BSH and BSI clips are both fitted with a sound suppressing rubber lining.

◆ Reinforcement grooves ensure that BSH and BSI clips maintain their shape.

◆ BSH and BSI clips are ideal for confined spaces; fixing bolt features screw-cross-head.

◆ BSI clips fitted with two bolts with anti-loss ring.

◆ BSH clips fitted with quick-locking system.

Types and dimensions BSI cl ipsType Ext. dia.

of pipefrom - to

Threadedtube dia.

Threaded connection Max. working

load

Max. working load*

16 dB(A)

Strip dimen-sions

Code number

in mm in inches M 8/10 M 10/12 N N in mm M 8/10 M 10/12

Types and dimensions BSH cl ipsType Ext. dia.

of pipefrom - to

Threadedtubedia.

Threaded connection

Max. working load

Max. working load*

15 dB(A)

Stripdimensions

Code number

in mm in inches M 8/10 in N in N in mm M 8/10


BSI 8 - 10 8 - 10 - M 8/10 - 1000 200 20 x 1.5 39023 -BSI 12 - 14 12 - 14 1/4 M 8/10 - 1000 200 20 x 1.5 39000 -BSI 15 - 19 15 - 19 3/8 M 8/10 - 1000 250 20 x 1.5 39001 -BSI 20 - 25 20 - 25 1/2 M 8/10 - 1000 300 20 x 1.5 39002 -BSI 26 - 30 26 - 30 3/4 M 8/10 - 1000 350 20 x 1.5 39003 -BSI 32 - 36 32 - 36 1 M 8/10 - 1000 400 20 x 1.5 39004 -BSI 38 - 43 38 - 43 11/4 M 8/10 - 1000 400 20 x 1.5 39005 -BSI 44 - 49 44 - 49 11/2 M 8/10 - 1000 450 20 x 1.5 39006 -BSI 50 - 55 50 - 55 - M 8/10 - 1000 450 20 x 1.5 39007 -BSI 56 - 61 56 - 61 2 M 8/10 - 1000 500 20 x 1.5 39008 -BSI 62 - 67 62 - 67 - M 8/10 - 1300 500 20 x 2.0 39009 -BSI 68 - 73 68 - 73 - M 8/10 - 1300 500 20 x 2.0 39010 -BSI 75 - 80 75 - 80 21/2 M 8/10 - 1300 550 20 x 2.0 39011 -BSI 82 - 86 82 - 86 - M 8/10 - 1300 550 20 x 2.0 39012 -BSI 87 - 92 87 - 92 3 M 8/10 - 1300 600 20 x 2.0 39013 -BSI 95 - 102 95 - 102 - M 8/10 M 10/12 2150 600 20 x 2.0 39014 39035BSI 108 - 116 108 - 116 4 M 8/10 - 2150 700 20 x 2.0 39015 -BSI 121 - 127 121 - 127 - M 8/10 M 10/12 2150 700 20 x 2.0 39016 39037BSI 131 - 141 131 - 141 5 M 8/10 M 10/12 2150 800 20 x 2.0 39017 39038BSI 159 - 163 159 - 163 - M 8/10 M 10/12 2150 1000 20 x 2.0 39018 39039BSI 165 - 169 165 - 169 6 M 8/10 - 2150 1150 20 x 2.0 39019 -BSI 192 - 202 192 - 202 - M 8/10 - 3000 1200 20 x 3.0 39020 -BSI 210 - 220 210 - 220 8 M 8/10 - 3000 1250 20 x 3.0 39022 -


BSI

BSH

BSH 12 - 14 12 - 14 1/4 M 8/10 1000 200 20 x 1.5 38360BSH 15 - 18 15 - 18 3/8 M 8/10 1000 250 20 x 1.5 38361BSH 19 - 22 19 - 22 1/2 M 8/10 1000 300 20 x 1.5 38362BSH 23 - 26 23 - 26 - M 8/10 1000 350 20 x 1.5 38363BSH 27 - 30 27 - 30 3/8 M 8/10 1000 400 20 x 1.5 38364BSH 32 - 35 32 - 35 - M 8/10 1000 400 20 x 1.5 38365BSH 36 - 39 36 - 39 - M 8/10 1000 450 20 x 1.5 38366BSH 40 - 44 40 - 44 11/4 M 8/10 1000 450 20 x 1.5 38367BSH 48 - 52 48 - 52 11/2 M 8/10 1000 500 20 x 1.5 38368BSH 53 - 58 53 - 58 - M 8/10 1000 500 20 x 1.5 38369BSH 60 - 65 60 - 65 2 M 8/10 1000 500 20 x 1.5 38370BSH 68 - 74 68 - 74 - M 8/10 1000 500 20 x 1.5 38371BSH 75 - 80 75 - 80 21/2 M 8/10 1000 500 20 x 1.5 38372BSH 81 - 86 81 - 86 - M 8/10 1000 500 20 x 1.5 38373BSH 87 - 92 87 - 92 3 M 8/10 1000 500 20 x 1.5 38374BSH 100 - 106 100 - 106 - M 8/10 1000 500 20 x 1.5 38375BSH 108 - 116 108 - 116 4 M 8/10 1000 500 20 x 1.5 38376BSH 121 - 127 121 - 127 - M 8/10 1000 500 20 x 1.5 38377


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


RWA-G, RWB-G and RWC-G clips

◆ Clips fitted with noise-reducing EPDM rubber insert for temperatures

from – 40 °C to + 120 °C.

◆ Suitable for all types of pipe.

◆ RWA-G clips complete with screws and nuts.

◆ RWB-G and RWC-G clips fitted with six-sided bolts with saw slot.

◆ RWC-G clips with M 10 connection. Particularly suitable for threaded

rod / wire tack M 10 for fitting to wall, ceiling and rail.

◆ RWA-G, RWB-G and RWC-G clips are electrolytically-galvanized.

Types and dimensions RWA-G cl ipsType Ext. dia.

of pipeThreaded tube

dia.Threaded

connectionMax.

working loadStrip

dimensionsCode

numberin mm in inches in N in mm

Types and dimensions RWC-G cl ipsType Ext. dia.


dia.Threaded

connectionMax.

working loadStrip

dimensionsCode


Types and dimensions RWB-G cl ipsType Ext. dia.


dia.Threaded

connectionMax.

working loadStrip

dimensionsCode


RWA-G 3/8 17.2 3/8 G 3/8 2500 22 x 3 52601RWA-G 1/2 21.3 1/2 G 3/8 2500 22 x 3 52602RWA-G 3/4 26.9 3/4 G 3/8 2500 22 x 3 52603RWA-G 1 33.7 1 G 3/8 2500 22 x 3 52604RWA-G 11/4 42.4 11/4 G 1/2 2500 30 x 3 52605RWA-G 11/2 48.3 11/2 G 1/2 2500 30 x 3 52606RWA-G 2 60.3 2 G 1/2 3000 30 x 3 52607RWA-G 21/2 76.1 21/2 G 1/2 3000 30 x 3 52608RWA-G 3 88.9 3 G 3/4 3000 30 x 3 52609RWA-G 4 114.3 4 G 3/4 3000 40 x 3 52610

RWC-G 3/8 17.2 3/8 M 10 2500 22 x 3 52641RWC-G 1/2 21.3 1/2 M 10 2500 22 x 3 52642RWC-G 3/4 26.9 3/4 M 10 2500 22 x 3 52643RWC-G 1 33.7 1 M 10 2500 22 x 3 52644RWC-G 11/4 42.4 11/4 M 10 2500 30 x 3 52645RWC-G 11/2 48.3 11/2 M 10 2500 30 x 3 52646RWC-G 2 60.3 2 M 10 3000 30 x 3 52647RWC-G 21/2 76.1 21/2 M 10 3000 30 x 3 52648RWC-G 3 88.9 3 M 10 3000 30 x 3 52649RWC-G 4 114.3 4 M 10 3000 40 x 3 52650

RWB-G 3/8 17.2 3/8 G 3/8 2500 22 x 3 52621RWB-G 1/2 21.3 1/2 G 3/8 2500 22 x 3 52622RWB-G 3/4 26.9 3/4 G 3/8 2500 22 x 3 52623RWB-G 1 33.7 1 G 3/8 2500 22 x 3 52624RWB-G 11/4 42.4 11/4 G 1/2 2500 30 x 3 52625RWB-G 11/2 48.3 11/2 G 1/2 2500 30 x 3 52626RWB-G 2 60.3 2 G 1/2 3000 30 x 3 52627RWB-G 21/2 76.1 21/2 G 1/2 3000 30 x 3 52628RWB-G 3 88.9 3 G 1/2 3000 30 x 3 52629RWB-G 4 114.3 4 G 1/2 3000 40 x 3 52630

RWA-G

RWB-G

RWC-G


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� RWA, RWB and RWC clips

◆ RWA clips complete with screws and nuts.

◆ RWB and RWC clips fitted with six-sided bolts with saw slot.

◆ RWC clips with M 10 connection. Particularly suitable for threaded rod / wire tack

M 10 for fitting to wall, ceiling and rail.

◆ Suitable for steel pipe.

◆ RWA, RWB and RWC clips are electrolytically-galvanized.

Types and dimensions RWA cl ipsType Ext. dia.

of pipeThreaded tube dia.

Threaded connection

Max.working load

Strip dimensions

Codenumber

in mm in inches in N in mm

Types and dimensions RWB cl ipsType Ext. dia.


Threaded connection

Max.working load

Strip dimensions

Codenumber


Types and dimensions RWC cl ipsType Ext. dia.


Threaded connection

Max.working load

Strip dimensions

Codenumber


RWA

RWB

RWC

RWA 3/8 17.2 3/8 G 3/8 2500 22 x 3 52101RWA 1/2 21.3 1/2 G 3/8 2500 22 x 3 52102RWA 3/4 26.9 3/4 G 3/8 2500 22 x 3 52103RWA 1 33.7 1 G 3/8 2500 22 x 3 52104RWA 11/4 42.4 11/4 G 3/8 2500 22 x 3 52105RWA 11/2 48.3 11/2 G 3/8 2500 22 x 3 52100RWA 11/2 48.3 11/2 G 1/2 3000 22 x 3 on demandRWA 2 60.3 2 G 1/2 3000 30 x 3 52107RWA 21/2 76.1 21/2 G 1/2 3000 30 x 3 52108RWA 3 88.9 3 G 3/4 3000 30 x 3 52109

RWB 3/8 17,2 3/8 G 3/8 2500 22 x 3 52121RWB 1/2 21,3 1/2 G 3/8 2500 22 x 3 52122RWB 3/4 26,9 3/4 G 3/8 2500 22 x 3 52123RWB 1 33,7 1 G 3/8 2500 22 x 3 52124RWB 11/4 42,4 11/4 G 3/8 2500 22 x 3 52125RWB 11/2 48,3 11/2 G 3/8 2500 22 x 3 52126RWB 2 60,3 2 G 1/2 3000 30 x 3 52127RWB 21/2 76,1 21/2 G 1/2 3000 30 x 3 52128RWB 3 88,9 3 G 3/4 3000 30 x 3 52129RWB 4 114,3 4 G 3/4 3000 30 x 3 52130

RWC 3/8 17,2 3/8 M 10 2500 22 x 3 52141RWC 1/2 21,3 1/2 M 10 2500 22 x 3 52142RWC 3/4 26,9 3/4 M 10 2500 22 x 3 52143RWC 1 33,7 1 M 10 2500 22 x 3 52144RWC 11/4 42,4 11/4 M 10 2500 22 x 3 52145RWC 11/2 48,3 11/2 M 10 2500 22 x 3 52146RWC 2 60,3 2 M 10 3000 30 x 3 52147RWC 21/2 76,1 21/2 M 10 3000 30 x 3 52148RWC 3 88,9 3 M 10 3000 30 x 3 52149RWC 4 114,3 4 M 10 3000 30 x 3 52150


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


BSU and BSF clips for (thin-walled) steel pipes and plastic pipes

◆ BSU and BSF clips for horizontal mounting to the wall or vertical mounting to

the ceiling.

◆ BSU and BSF clips are electrolytically zinc-plated.

◆ BSU and BSF clips are suitable for high loads and high temperatures.

◆ BSU and BSF clips are ideal for confined locations.

◆ BSF clips in connection sizes M 10, M 12, M 16 and 1⁄2 versions, fitted with

anti-loss ring.

Types and dimensions F lamco BSF cl ipsType Ext. dia.

of pipefrom - to

Threadedtubedia.

Threadedconnection

Max.working

load

Stripdimen-sions

Codenumber

in mm in inches M 8 M 10 M 12 M 16 1/2 1/2 / M 10 in N (v=3) in mm M 8 M 10 M 12 M 16 1/2 1/2 / M 10

Types and dimensions BSU cl ipsType Ext. dia.

of pipefrom - to

Threadedtubedia.

Threadedconnection

Max.working load

Stripdimensions

Codenumber

in mm in inches in N (v=3) in mm

BSF 13 - 17.5 13.5 - 17.5 3/8 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38701 38711 - - 38761 51801BSF 21 - 25.5 21 - 25.5 1/2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38702 38712 - - 38762 51802BSF 26.5 - 30.5 26.5 - 30.5 3/4 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38703 38713 - - 38763 51803BSF 33.5 - 38.5 33.5 - 38.5 1 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38704 38714 - - 38764 51804BSF 41.5 - 47.5 41.5 - 47.5 11/4 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38705 38715 - - 38765 51805BSF 48 - 54.5 48 - 54.5 11/2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38706 38716 - - 38766 51806BSF 56 - 62.5 56 - 62.5 2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38707 38717 - - 38767 51807BSF 62.5 - 69.5 62.5 - 69.5 - M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38788 38718 - - 38768 51808BSF 69.5 - 76.5 69.5 - 76.5 21/2 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38789 38719 - - 38769 51809BSF 77.5 - 84.5 77.5 - 84.5 - M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38790 38720 - - 38770 51810BSF 85 - 92.5 85 - 92.5 3 M 8 M 10 - - 1/2 1/2 / M 10 1650 20 x 2.5 38791 38721 - - 38771 51811BSF 93 - 100.5 93 - 100.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38792 38722 38742 - 38772 51812BSF 101.5 - 110.5 101.5 - 110.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38793 38723 38743 - 38773 51813BSF 110 - 117.5 110 - 117.5 4 M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38794 38724 38744 - 38774 51814BSF 119.5 - 127.5 119.5 - 127.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38795 38725 38745 - 38775 51815BSF 127.5 - 133.5 127.5 - 133.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 3000 25 x 2.5 38796 38726 38746 - 38776 51816BSF 134.5 - 142.5 134.5 - 142.5 5 M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38797 38727 38747 - 38777 51817BSF 143.5 - 150.5 143.5 - 150.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38798 38728 38748 - 38778 51818BSF 151.5 - 159.5 151.5 - 159.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38799 38729 38749 - 38779 51819BSF 163.5 - 171.5 163.5 - 171.5 6 M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38800 38730 38750 - 38780 51820BSF 172.5 - 182.5 172.5 - 182.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38801 38731 38751 - 38781 51821BSF 192.5 - 198.5 192.5 - 198.5 - M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38802 38732 38752 - 38782 51822BSF 215 - 220.5 215 - 220.5 8 M 8 M 10 M 12 - 1/2 1/2 / M 10 4000 30 x 3.0 38803 38733 38753 - 38783 51823BSF 267 - 273 267 - 273 10 - - - M 16 - - 10000 50 x 5.0 - - - 38754 - -BSF 315 - 324 315 - 324 12 - - - M 16 - - 10000 50 x 5.0 - - - 38755 - -BSF 350 - 356 350 - 356 14 - - - M 16 - - 10000 50 x 5.0 - - - 38756 - -BSF 400 - 406 400 - 406 16 - - - M 16 - - 10000 50 x 5.0 - - - 38757 - -

BSF

BSUBSU 20 - 25 20 - 25 1/2 M 8/10 500 20 x 1.5 38271BSU 26 - 30 26 - 30 3/4 M 8/10 600 20 x 1.5 38272BSU 32 - 36 32 - 36 1 M 8/10 800 20 x 1.5 38273BSU 38 - 43 40 - 43 11/4 M 8/10 1000 20 x 1.5 38274BSU 44 - 49 44 - 49 11/2 M 8/10 1200 20 x 1.5 38275BSU 56 - 61 56 - 61 2 M 8/10 1300 20 x 1.5 38276BSU 75 - 80 75 - 80 21/2 M 8/10 1500 20 x 2.0 38277BSU 87 - 92 87 - 92 3 M 8/10 1500 20 x 2.0 38278BSU 108 - 116 108 - 116 4 M 10/12 2000 20 x 2.5 38282BSU 131 - 141 131 - 141 5 M 10/12 2000 20 x 2.5 38283BSU 165 - 169 165 - 169 6 M 10/12 2000 20 x 2.5 38284


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� BSF-D clips for (thin-walled) steel pipes and plastic pipes

◆ BSF-D clips for fitting to the ceiling.

◆ The BSF-D has an additional lower nut to permit further clips to be installed beneath,

(subject to overall design loads).

◆ BSF-D clips are electrolytically zinc-plated.

◆ BSF-D clips are suitable for high loads and high temperatures.

◆ BSF-D clips are ideal for confined locations.

Types and dimensions F lamco BSF-D cl ipsType Ext. dia. of pipe Threaded

tube dia.Threaded

connectionMax. working

loadStrip

dimensionsCode

numberfrom - to in mm in inches D in N (v=3) in mm

BSF-D 13.0 - 17.5 13.5 - 17.5 3/8 M 8 1650 20 x 2.5 38500BSF-D 21.0 - 25.5 21.0 - 25.5 1/2 M 8 1650 20 x 2.5 38501BSF-D 26.5 - 30.5 26.5 - 30.5 3/4 M 8 1650 20 x 2.5 38502BSF-D 33.5 - 38.5 33.5 - 38.5 1 M 8 1650 20 x 2.5 38503BSF-D 41.5 - 47.5 41.5 - 47.5 11/4 M 8 1650 20 x 2.5 38504BSF-D 48.0 - 54.5 48.0 - 54.5 11/2 M 8 1650 20 x 2.5 38505BSF-D 56.0 - 62.5 56.0 - 62.5 2 M 8 1650 20 x 2.5 38506BSF-D 62.5 - 69.5 62.5 - 69.5 - M 8 1650 20 x 2.5 38507BSF-D 69.5 - 76.5 69.5 - 76.5 21/2 M 8 1650 20 x 2.5 38508BSF-D 77.5 - 84.5 77.5 - 84.5 - M 8 1650 20 x 2.5 38509BSF-D 85.0 - 92.5 85.0 - 92.5 3 M 8 1650 20 x 2.5 38510BSF-D 93.0 - 100.5 93.0 - 100.5 - M 8 3000 25 x 2.5 38511BSF-D 101.5 - 110.5 101.5 - 110.5 - M 8 3000 25 x 2.5 38512BSF-D 110.0 - 117.5 110.0 - 117.5 4 M 8 3000 25 x 2.5 38513BSF-D 119.5 - 127.5 119.5 - 127.5 - M 8 3000 25 x 2.5 38514BSF-D 127.5 - 133.5 127.5 - 133.5 - M 8 3000 25 x 2.5 38515BSF-D 134.5 - 142.5 134.5 - 142.5 5 M 8 4000 30 x 3.0 38516BSF-D 143.5 -1 50.5 143.5 - 150.5 - M 8 4000 30 x 3.0 38517BSF-D 151.5 - 159.5 151.5 - 159.5 - M 8 4000 30 x 3.0 38518BSF-D 163.5 - 171.5 163.5 - 171.5 6 M 8 4000 30 x 3.0 38519BSF-D 172.5 - 182.5 172.5 - 182.5 - M 8 4000 30 x 3.0 38520BSF-D 192.5 - 198.5 192.5 - 198.5 - M 8 4000 30 x 3.0 38521BSF-D 215.0 - 220.5 215.0 - 220.5 8 M 8 4000 30 x 3.0 38522

* The load applies for all the BSF-D Clips fi tted under each other.

BSF-D


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


Selection table for BSF and BSF-D clips

◆ Using the table below, you can easily find the right type of BSF or BSF-D clip for

the type and dimension of pipes you require.

Select ion table for BSF and BSF-D cl ipsType Threaded tube

DIN 2440/24412460/2461

Sprinkler pipeDIN 2448/2458

DIN 19522

ML pipeSML pipe

LORO X PVC pipe

nom.dia.


nom.dia.

in mmext. dia.in mm

nom.dia.

in mmext. dia.in mm

nom.dia.

in mmext. dia.in mm

ext. dia.in mm

13.5 - 17.5 - 13.5 - 13.5 - - - - 16 3/8 17.2 - 16.5 - - - - - - - 10 17.2 - - - - - 21.5 - 25.5 1/2 21.3 15 21.3 - - - - 25 - - 20 25.0 - - - - - 26.5 - 30.5 3/4 26.9 20 26.9 - - - - - - - 25 30.0 - - - - 33.5 - 38.5 1 33.7 25 33.7 - - - - - - - 32 38.0 - - - - - 41.5 - 47 11/4 42.4 32 42.4 - - - 40.0 - - - 40 44.5 - - - - - 48.5 - 54 11/2 48.3 40 48.3 - - 50 53.0 50 - - - 51.5 - - - - - 56.5 - 62.5 2 60.3 50 57.4 50 58 - - - - - 50 60.3 - - - - - 62.5 - 69.5 - - - 63.5 - - - - 63 69.5 - 76.5 21/2 76.1 - 70.5 - - 70 73.5 75 - - 65 76.1 - - - - - 77.5 - 84 - - 82.5 - 70 78 - - 85.1 - 92.5 3 88.9 80 88.9 - - 80 89.5 90 93.5 - 100.5 - - - 95.5 - - 100 102.5 -101.5 - 110.5 - - - 101.6 - - - - 110 - - 100 108.1 - - - - -110.5 - 117.5 4 114.3 100 114.3 100 110 - - -119.5 - 127.5 - - - 121.2 - - - - 125 - - - 127.1 - - - - -127.5 - 133.5 - - 125 133.5 - - 125 133.5 -134.5 - 142.5 5 139.7 125 139.7 125 135 - - -143.5 - 150.5 - - - - - - - - -151.5 - 159.5 - - 150 159.5 - - 150 159.5 -163.5 - 171.5 6 165.1 150 165.1 - - - - - - - - 168.3 - - - - -172.5 - 182 - - - - - - - - -192.5 - 198 - - 175 193.7 - - - - -215.5 - 220 8 - 200 219.1 - - 200 219.1 -


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� Selection table for BSF and BSF-D clips

◆ Using the table below, you can easily find the right type of BSF or BSF-D clip for

the type and dimension of pipes you require.

Select ion table for BSF and BSF-D cl ipsType PE pipe

GeberitWicu Specialcopper pipe

Wicu Extracopper pipe

Thin-walledsteel pipeDIN 2391

Vul-cathene

ext. dia.in mm

wallthickness

in mmext. dia.in mm

wallthickness

in mmext. dia.in mm

ext. dia.in mm

ext. dia.in mm

13.5- 17.5 - 10 x 1.5 14 - - 16 16 - 12 x 1.5 16 - - - - 21.5 - 25.5 25 18 x 1.5 23 - - 22 25 - - - - - 25 - 26.5 - 30.5 - 22 x 1.5 27 12 x 1.5 26 28 - - - - 15 x 1.5 29 30 - 33.5 - 38.5 - - - 15 x 1.5 37 35 - - - - - 38 - 41.5 - 47 - - - 22 x 1.5 46 45 - 48.5 - 54 50 42 x 1.5 48 - - 48 50 - - - - - 50 - 56.5 - 62.5 56 54 x 2.5 60 - - 60 - 62.5 - 69.5 63 - - 28 x 1.5 64 63 63 69.5 - 76.5 75 - - 35 x 1.5 72 70 75 77.5 - 84 - - - - - 80 - 85.1 - 92.5 90 - - 42 x 1.5 91 90 90 93.5 - 100.5 - - - - - 100 -101.5 - 110.5 110 - - - - 110 110110.5 - 117.5 - - - 54 x 2.5 116 - -119.5 - 127.5 125 - - - - 120 125127.5 - 133.5 - - - - - - -134.5 - 142.5 140 - - - - - -143.5 - 150.5 - - - - - - -151.5 - 159.5 - - - - - - -163.5 - 171.5 - - - - - - -172.5 - 182 - - - - - - -192.5 - 198 - - - - - - -215.5 - 220 - - - - - - -


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


◆ BSP clips for fixed point constructions, for example in combination with VH corner

connections (see page 6.5 and 6.10) or VG angular plate (see page 8.3 and 8.9) and

for very high loads.

◆ BSP clips are electrolytically zinc-plated and offer extra long lugs for mounting.

◆ BSP clips are supplied as complete clip. i.e. with two halves.

BSP fixed point clips

Types and dimensions F lamco BSP cl ipsType Ext. dia.


nom. dia. Strip

dimensionsSuitable for Tightening moment

of bolt/nutMax. axial

load on clipCode

numberin mm in inches in N dia. bolt backnut in Nm in N

BSP 33.7 33.7 1 40 x 4.0 11 M 10 50 1000 38080BSP 42.4 42.4 11⁄4 40 x 4.0 11 M 10 50 1000 38081BSP 48.3 48.3 11⁄2 40 x 4.0 11 M 10 50 1000 38082BSP 60.3 60.3 2 40 x 4.0 11 M 10 50 1000 38083BSP 76.1 76.1 21⁄2 40 x 4.0 11 M 10 50 5000 38084BSP 88.9 88.9 3 40 x 4.0 11 M 10 50 5000 38085BSP 108 108 - 40 x 4.0 11 M 10 50 5000 38086BSP 114.4 114.4 4 40 x 4.0 11 M 10 50 5000 38087BSP 133 133 - 40 x 4.0 11 M 10 50 5000 38088BSP 139.7 139.7 5 40 x 4.0 11 M 10 50 5000 38089BSP 159 159 - 40 x 4.0 11 M 10 50 5000 38090BSP 168.3 168.3 6 40 x 4.0 11 M 10 50 5000 38091BSP 216 216 - 50 x 6.0 13 M 12 90 10000 38092BSP 219.1 219.1 8 50 x 6.0 13 M 12 90 10000 38093BSP 267 267 - 50 x 6.0 13 M 12 90 10000 38094BSP 273 273 10 50 x 6.0 13 M 12 90 10000 38095BSP 318 318 - 50 x 6.0 13 M 12 90 10000 38096BSP 323.9 323.9 12 50 x 6.0 13 M 12 90 10000 38097

BSP


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


��◆ KB clips for fixed point constructions and very high loads.

◆ Heavy-duty type according to DIN 3567.

◆ KB clips are delivered per half – i.e. for one half of the clip.

KB clips

Types and dimensions F lamco KB cl ipsType Ext. dia.

of pipeThreaded

tube nom. dia.

Sprinkler pipe

nom. dia.

Dimensions in mm Stripdimensions

Bolts required

Codenumber

in mm in inches in mm A C D F R mm steel zinc-plated

KB 22 22 1/2 15 56 15 11.5 7 7 30 x 5.0 M 10 x 30 37932 37882KB 25 25 - 20 62 15 11.5 7 7 30 x 5.0 M 10 x 30 37900 -KB 27 27 3/4 20 66 15 11.5 7 7 30 x 5.0 M 10 x 30 37901 37851KB 30 30 - 25 68 15 11.5 7 7 30 x 5.0 M 10 x 30 37902 -KB 34 34 1 25 72 15 11.5 7 7 30 x 5.0 M 10 x 30 37903 37853KB 38 38 - 32 76 15 11.5 7 7 30 x 5.0 M 10 x 30 37904 -KB 43 43 11/4 32 82 15 11.5 7 7 30 x 5.0 M 10 x 30 37905 37855KB 45 45 - 40 84 15 11.5 7 7 30 x 5.0 M 10 x 30 37906 -KB 49 49 11/2 40 88 15 11.5 7 7 30 x 5.0 M 10 x 30 37907 37857KB 57 57 - 50 104 18 14 9 9 40 x 6.0 M 12 x 35 37908 -KB 61 61 2 50 108 18 14 9 9 40 x 6.0 M 12 x 35 37909 37859KB 77 77 21/2 65 122 18 14 9 9 40 x 6.0 M 12 x 35 37910 37860KB 89 89 3 80 136 18 14 9 9 40 x 6.0 M 12 x 35 37911 37861KB 108 108 - 100 172 24 18 11 12 50 x 8.0 M 16 x 45 37912 37862KB 115 115 4 100 178 24 18 11 12 50 x 8.0 M 16 x 45 37913 37863KB 133 133 - 125 196 24 18 11 12 50 x 8.0 M 16 x 45 37914 37864KB 140 140 5 125 204 24 18 11 12 50 x 8.0 M 16 x 45 37915 37865KB 159 159 - 150 222 24 18 11 12 50 x 8.0 M 16 x 45 37916 37866KB 169 169 6 150 232 24 18 11 12 50 x 8.0 M 16 x 45 37917 37867KB 194 194 - 175 258 24 18 11 12 50 x 8.0 M 16 x 45 37919 -KB 220 220 8 200 284 24 18 11 12 50 x 8.0 M 16 x 45 37921 37871KB 267 267 - 250 342 30 23 14 12 60 x 8.0 M 20 x 50 37922 -KB 273 273 10 250 348 30 23 14 12 60 x 8.0 M 20 x 50 37923 -KB 324 324 12 300 398 30 23 14 12 60 x 8.0 M 20 x 50 37925 37875KB 356 356 14 350 432 30 23 14 12 60 x 8.0 M 20 x 50 37926 37876KB 368 368 - 350 444 30 23 14 12 60 x 8.0 M 20 x 50 37927 -KB 407 407 16 400 498 36 27 18 15 70 x 10.0 M 24 x 60 37928 -KB 419 419 - 400 510 36 27 18 15 70 x 10.0 M 24 x 60 37929 -KB 457 457 - 450 550 36 27 18 15 70 x 10.0 M 24 x 60 37933 -KB 508 508 - 500 600 36 27 18 15 70 x 10.0 M 24 x 60 37930 -KB 521 521 - 500 614 36 27 18 15 70 x 10.0 M 24 x 60 37931 -

� ��

�

�

� �

KB


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


◆ Variofit clips are suitable for copper or thin-walled steel pipes or use in the Flamco rail

R1, R 2, R 3 and R 4.

◆ Variofit clips manufactured from nylon plastic with brass fixing nut.

◆ Variofit clips can be secured using M 6 rod or wood screws with a maximum head of

7 mm.

◆ PC plug clips for use with floor heating and plastic pipes for mounting on the floor.

Manufactured from nylon plastic. Drilled hole 6 mm, drilled depth 30 mm.

◆ KS clips with brass nut with M 6 connection.

◆ KS clips are resistant to temperatures from – 30 °C to + 120 °C.

◆ KS clips in single (KS), double (KSD) and chrome (KSC and KSDC).

Variofit plastic clips, PC plug clips, and KS clips

Types and dimensions F lamco Var iof i t cl ipsType Ext. dia. Threaded Minimum pull-out force Centre distance Code

of pipein mm

connection openN

closedN

to the wallin mm

number

Types and dimensions F lamco PC plug cl ipsType Ext. dia.

of pipeDistance between centres Code

numberin mm in mm

Types and dimensions F lamco KS cl ipsType Ext. dia.

of pipeExt. dia. of pipe

Threaded connection

Dimensions in mm CodenumberA H

in mm in mm in mm in mm

Variofi t 12 12 M 6 100 500 20 15112Variofi t 15 15 M 6 100 500 20 15115Variofi t 22 22 M 6 100 700 25 15122Variofi t 28 28 M 6 100 700 25 15128

PC 16 - 19 single 16 - 19 - 15216PC 20 - 24 single 20 - 24 - 15220PC 25 - 30 single 25 - 30 - 15225PC 20 - 24 double 20 - 24 27 15320PC 25 - 30 double 25 - 30 45 15325

KS 8 8 - M 6 - 12 62108KS 10 10 6 M 6 - 16 62110KS 12 12 8 M 6 - 17 62112KS 15 15 10 M 6 - 18 62115KS 18 18 12 M 6 - 23 62118KS 22 22 15 M 6 - 26 62122KS 24 24 28 M 6 - 31 62124KS 28 28 22 M 6 - 33 62128KS 35 35 22 M 6 - 38 62135KS 42 42 28 M 6 - 42 62142

KSC 10 2 x 10 6 M 6 - 16 62160KSC 12 2 x 12 8 M 6 - 17 62162KSC 15 2 x 15 10 M 6 - 18 62162 KSD 8 8 - M 6 23 15 62028KSD 10 10 2 x 6 M 6 29 16 62210KSD 12 12 2 x 8 M 6 33 17 62212KSD 15 15 2 x 10 M 6 35 18 62215KSD 18 18 2 x 12 M 6 38 23 62218KSD 22 22 2 x 15 M 6 43 26 62222KSD 28 28 2 x 22 M 6 53 33 62228

KSDC 10 2 x 10 2 x 6 M 6 29 16 62260KSDC 12 2 x 12 2 x 8 M 6 33 17 62262KSDC 15 2 x 15 2 x 10 M 6 35 18 62265

�

�

�

VARIOFIT

PC

KS

KSD


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


��◆ UB: heavy-duty clip for mounting steel pipes directly to Flamco rail or other

surfaces.

◆ Threaded connection from M 6 to M 16.

◆ Supplied complete with 4 nuts.

◆ Omega: basic version, particularly suitable for flush fitting to walls.

◆ Fast and easy fitting.

◆ UB and Omega clip electrolytically-galvanized.

UB and Omega clips

Types and dimensions UB cl ipsType Ext. dia.

of pipefrom - to

Threa-dedtube

Threadedconnection

Dimensions in mm Suitable forFlamco rail

Codenumber

Athreaded end

Bin mm in inches

Types and dimensions Omega cl ipsType Ext. dia.

of pipeThreaded tube Strip

dimensionsCode

numberin mm mm

� �

UB

OMEGA

UB 6 x 10 - 14 10 - 14 1⁄4 M 6 35 30 R 1 / R 2 / R 8 81001UB 6 x 15 - 18 15 - 18 3⁄8 M 6 36.5 30 R 1 / R 2 / R 8 81002UB 6 x 19 - 22 19 - 22 1⁄2 M 6 38.5 30 R 1 / R 2 / R 8 81003UB 8 x 23 - 27 23 - 27 3⁄4 M 8 45 30 R 0 / R 1 / R 2 / R 8 81004UB 8 x 28 - 34 28 - 34 1 M 8 49 40 R 0 / R 1 / R 2 / R 8 81005UB 8 x 35 - 43 35 - 43 11⁄4 M 8 53 40 R 0 / R 1 / R 2 / R 8 81006UB 8 x 44 - 49 44 - 49 11⁄2 M 8 56 40 R 0 / R 1 / R 2 / R 8 81007UB 8 x 50 - 61 50 - 61 2 M 8 62 45 R 1 / R 2 / R 8 81008UB 8 x 62 - 70 62 - 70 - M 8 67 45 R 1 / R 2 / R 8 81009UB 8 x 71 - 77 71 - 77 21⁄2 M 8 70 45 R 0 / R 1 / R 2 / R 8 81010UB 10 x 78 - 89 78 - 89 3 M 10 82 45 R 1 / R 2 / R 8 81011UB 10 x 90 - 102 90 - 102 31⁄2 M 10 88 50 R 1 / R 2 / R 8 81012UB 10 x 103 - 108 103 - 108 - M 10 91 50 R 1 / R 2 / R 8 81013UB 10 x 109 - 115 109 - 115 4 M 10 94 50 R 1 / R 2 / R 8 81014UB 12 x 116 - 127 116 - 127 - M 12 124 70 R 4 / R 7 / R 8 81015UB 12 x 128 - 133 128 - 133 - M 12 127 80 R 4 / R 7 / R 8 81016UB 12 x 134 - 140 134 - 140 5 M 12 130 80 R 4 / R 7 / R 8 81017UB 12 x 141 - 159 141 - 159 - M 12 140 80 81018UB 12 x 160 - 169 160 - 169 6 M 12 150 85 R 4 / R 7 / R 8 81019UB 12 x 170 - 220 170 - 220 8 M 12 175 85 R 4 / R 7 / R 8 81020UB 16 x 221 - 273 221 - 273 10 M 16 180 60 81021UB 16 x 274 - 324 274 - 324 12 M 16 205 70 81022UB 16 x 325 - 356 325 - 356 14 M 16 220 70 81023UB 16 x 357 - 407 357 - 407 16 M 16 250 70 81024

Omega 1/4 13.5 1⁄4 20 x 2 51390 Omega 3/8 17.2 3⁄8 20 x 2 51391 Omega 1/2 21.3 1⁄2 20 x 2 51392 Omega 3/4 26.9 3⁄4 20 x 2 51393 Omega 1 33.7 1 20 x 2 51394 Omega 11/4 42.4 11⁄4 20 x 2 51395 Omega 11/2 48.3 11⁄2 20 x 2 51396 Omega 2 60.3 2 20 x 2 51397


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


Flamco BK clips for steel pipes

◆ Sleeve and ball joint electrolytically zinc-plated.

◆ Provision for additional clips to be installed beneath using the BO connector (subject

to overall design loads) whilst maintaining flexibility*.

Types and dimensions F lamco BK cl ipsType Threaded

tube nom. dia.

Sprinkler Pipe

ext. dia.

Thin-w. steel pipeext. dia.

Threaded connection

Max.working

load

Stripdimen-sions

A Cap Codenumber

in inches in mm in mm in N in mm in mmBK 6 x 15* - - 15 M 6 1500 12 x 1.5 40 T 6 32109BK 6 x 18* - - 18 M 6 1500 12 x 1.5 40 T 6 32101BK 6 x 22 - - 22 M 6 1500 12 x 1.5 40 T 6 32102BK 6 x 28 - - 28 M 6 1500 12 x 1.5 40 T 6 32110BK 6 x 35 - - 35 M 6 1500 12 x 1.5 40 T 6 32111BK 6 x 42 - - 42 M 6 1500 12 x 1.5 40 T 6 32105

BK 6 x 3/8 3/8 - - M 6 1500 12 x 1.5 40 T 6 32101BK 6 x 1/2 1/2 - - M 6 1500 12 x 1.5 40 T 6 32102BK 6 x 3/4 3/4 - - M 6 1500 12 x 1.5 40 T 6 32103BK 6 x 1 1 - - M 6 1500 12 x 1.5 40 T 6 32104BK 6 x 11/4 11/4 - - M 6 1500 12 x 1.5 40 T 6 32105BK 6 x 11/2 11/2 - - M 6 1500 12 x 1.5 40 T 6 32106BK 6 x 2 2 - - M 6 1500 12 x 1.5 40 T 6 32107

BK 6 x 25 - 25.9 - M 6 1500 12 x 1.5 40 T 6 32130BK 6 x 30 - 31.8 - M 6 1500 12 x 1.5 40 T 6 32131BK 6 x 38 - 38 - M 6 1500 12 x 1.5 40 T 6 32132BK 6 x 44 - 44.5 - M 6 1500 12 x 1.5 40 T 6 32133BK 6 x 51 - 51 - M 6 1500 12 x 1.5 40 T 6 32134BK 6 x 57 - 57 - M 6 1500 12 x 1.5 40 T 6 32135BK 6 x 62 - 62 - M 6 1500 12 x 1.5 40 T 6 32137BK 6 x 64 - 63.5 - M 6 1500 12 x 1.5 40 T 6 32136

* Except BK 6 x 15 and BK 6 x 18.

�

BK


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


��◆ Sleeve and ball joint electrolytically zinc-plated.

◆ Provision for additional clips to be installed beneath using the BO connector

(subject to overall design loads) whilst maintaining flexibility*.

◆ BK clips with a connection size of M 12 have a lock on the inside of the sleeve.

Flamco BK clips for steel pipes

Types and dimensions F lamco BK cl ipsType Threaded

tube nom. dia.

Sprinkler pipe

ext. dia.

Thin-w. steel pipe

ext. dia

Threadedconnection

Max.working

load

Stripdimen-sions

A Cap Codenumber

in inches in mm in mm in N in mm in mmBK 8 x 15* - - 15 M 8 1500 12 x 1.50 40 T 8S 32209BK 8 x 18* - - 18 M 8 1500 12 x 1.50 40 T 8S 32201BK 8 x 22 - - 22 M 8 1500 12 x 1.50 40 T 8S 32202BK 8 x 28 - - 28 M 8 1500 12 x 1.50 40 T 8S 32210BK 8 x 35 - - 35 M 8 1500 12 x 1.50 40 T 8S 32211BK 8 x 42 - - 42 M 8 1500 12 x 1.50 40 T 8S 32205

BK 8 x 3/8 3/8 - - M 8 1500 12 x 1.50 40 T 8S 32201BK 8 x 1/2 1/2 - - M 8 1500 12 x 1.50 40 T 8S 32202BK 8 x 3/4 3/4 - - M 8 1500 12 x 1.50 40 T 8S 32203BK 8 x 1 1 - - M 8 1500 12 x 1.50 40 T 8S 32204BK 8 x 11/4 11/4 - - M 8 1500 12 x 1.50 40 T 8S 32205BK 8 x 11/2 11/2 - - M 8 1500 12 x 1.50 40 T 8S 32206BK 8 x 2 2 - - M 8 1500 12 x 1.50 40 T 8S 32207

BK 8 x 44 - 44.5 - M 8 1500 12 x 1.50 40 T 8S 32233BK 8 x 51 - 51 - M 8 1500 12 x 1.50 40 T 8S 32234BK 8 x 57 - 57 - M 8 1500 12 x 1.50 40 T 8S 32235BK 8 x 64 - 63.5 - M 8 1500 12 x 1.50 40 T 8S 32236BK 8 x 70 - 70 - M 8 2500 16 x 1.90 54 T 8 32237BK 8 x 76 21/2 76.1 - M 8 2500 16 x 1.90 54 T 8 32238BK 8 x 78 - 78 - M 8 2500 16 x 1.90 54 T 8 32280BK 8 x 83 - 82.5 - M 8 2500 16 x 1.90 54 T 8 32239BK 8 x 89 3 88.9 - M 8 2500 16 x 1.90 54 T 8 32240BK 8 x 90 - 90 - M 8 2500 16 x 1.90 54 T 8 32281BK 8 x 95 - 95 - M 8 2500 16 x 1.90 54 T 8 32241BK 8 x 102 31/2 101.6 - M 8 2500 16 x 1.90 54 T 8 32242

BK 12 x 108 - 108 - M 12 5000 25 x 2.75 60 T 12 32343BK 12 x 114 4 114.3 - M 12 5000 25 x 2.75 60 T 12 32344BK 12 x 121 - 121 - M 12 5000 25 x 2.75 60 T 12 32345BK 12 x 127 - 127 - M 12 5000 25 x 2.75 60 T 12 32346BK 12 x 133 - 133 - M 12 5000 25 x 2.75 60 T 12 32347BK 12 x 140 5 139.7 - M 12 5000 25 x 2.75 60 T 12 32349BK 12 x 146 - 146 - M 12 5000 25 x 2.75 60 T 12 32350BK 12 x 152 - 152.4 - M 12 5000 25 x 2.75 60 T 12 32351BK 12 x 159 - 159 - M 12 5000 25 x 2.75 60 T 12 32352BK 12 x 168 6 168.3 - M 12 5000 25 x 2.75 60 T 12 32353BK 12 x 171 - 171 - M 12 5000 25 x 2.75 60 T 12 32354BK 12 x 178 - 177.8 - M 12 5000 25 x 2.75 60 T 12 32355BK 12 x 193 - 193.7 - M 12 5000 25 x 2.75 60 T 12 32357BK 12 x 216 - 216 - M 12 5000 25 x 2.75 60 T 12 32358BK 12 x 219 8 219.1 - M 12 5000 25 x 2.75 60 T 12 32359BK 12 x 241 - 241 - M 12 5000 25 x 2.75 60 T 12 32360BK 12 x 244 - 244.5 - M 12 5000 25 x 2.75 60 T 12 32363BK 12 x 267 - 267 - M 12 5000 25 x 2.75 60 T 12 32362BK 12 x 273 10 273 - M 12 5000 25 x 2.75 60 T 12 32364BK 12 x 299 - 298.5 - M 12 5000 25 x 2.75 60 T 12 32369BK 12 x 323 12 323.9 - M 12 5000 25 x 2.75 60 T 12 32365BK 12 x 355 14 355.6 - M 12 5000 25 x 2.75 60 T 12 32366BK 12 x 368 - 368 - M 12 5000 25 x 2.75 60 T 12 32367BK 12 x 406 16 406.4 - M 12 5000 25 x 2.75 60 T 12 32368

* Except BK 8 x 15 and BK 8 x 18.

�

BK


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


◆ Sleeve and ball joint electrolytically zinc-plated.

◆ Provision for additional clips to be installed beneath using the BO connector (subject

to overall design loads) whilst maintaining flexibility*.

◆ BKI clips with a connection size of M 12 have a lock on the inside of the sleeve.

Flamco BKI clips with noise suppressing rubber lining

Types and dimensions F lamco BKI cl ipsType Threaded

tube

nom. dia

Firetube

ext. dia.

Thin-w.steelpipe

ext. dia.

Copperpipe

ext. dia.

Threadedconnec-

tion

Max.working

load

Max.working

load

20 dB(A)

Stripdimensions

A Codenumber

in inches in mm in mm in mm in N in N** in mm in mmBKI 6 x 12* - - 12 12 M 6 1500 400 12 x 1.50 40 33008BKI 6 x 15* - - 15 15 M 6 1500 400 12 x 1.50 40 33009BKI 6 x 18* - - 18 18 M 6 1500 400 12 x 1.50 40 33001BKI 6 x 22 - - 22 22 M 6 1500 400 12 x 1.50 40 33014BKI 6 x 28 - - 28 28 M 6 1500 400 12 x 1.50 40 33010BKI 6 x 35 - - 35 35 M 6 1500 400 12 x 1.50 40 33011BKI 6 x 42 - - 42 42 M 6 1500 400 12 x 1.50 40 33012BKI 6 x 54 - - 54 54 M 6 1500 400 12 x 1.50 40 33013

BKI 6 x 3/8 3/8 - - - M 6 1500 400 12 x 1.50 40 33001BKI 6 x 1/2 1/2 - - - M 6 1500 400 12 x 1.50 40 33002BKI 6 x 3/4 3/4 - - - M 6 1500 400 12 x 1.50 40 33003BKI 6 x 1 1 - - - M 6 1500 400 12 x 1.50 40 33004BKI 6 x 11/4 11/4 - - - M 6 1500 400 12 x 1.50 40 33005BKI 6 x 11/2 11/2 - - - M 6 1500 400 12 x 1.50 40 33006BKI 6 x 2 2 - - - M 6 1500 400 12 x 1.50 40 33007

BKI 6 x 44 - 44.5 - - M 6 1500 400 12 x 1.50 40 33033BKI 6 x 51 - 51 - - M 6 1500 400 12 x 1.50 40 33034BKI 6 x 57 - 57 - - M 6 1500 400 12 x 1.50 40 33035BKI 6 x 64 - 63.5 - - M 6 1500 400 12 x 1.50 40 33036

BKI 8 x 70 - 70 - - M 8 2500 700 16 x 1.90 54 33137BKI 8 x 76 21/2 76.1 - - M 8 2500 700 16 x 1.90 54 33138BKI 8 x 83 - 82.5 - - M 8 2500 700 16 x 1.90 54 33139BKI 8 x 89 3 88.9 - - M 8 2500 700 16 x 1.90 54 33140

BKI 12 x 95 - 95 - - M 12 5000 2000 25 x 2.75 60 33241BKI 12 x 102 31/2 101.6 - - M 12 5000 2000 25 x 2.75 60 33242BKI 12 x 108 - 108 - - M 12 5000 2000 25 x 2.75 60 33243BKI 12 x 114 4 114.3 - - M 12 5000 2000 25 x 2.75 60 33244BKI 12 x 121 - 121 - - M 12 5000 2000 25 x 2.75 60 33245BKI 12 x 127 - 127 - - M 12 5000 2000 25 x 2.75 60 33246BKI 12 x 133 - 133 - - M 12 5000 2000 25 x 2.75 60 33247BKI 12 x 140 5 139.7 - - M 12 5000 2000 25 x 2.75 60 33248BKI 12 x 146 - 146 - - M 12 5000 2000 25 x 2.75 60 33250BKI 12 x 152 - 152.4 - - M 12 5000 2000 25 x 2.75 60 33251BKI 12 x 159 - 159 - - M 12 5000 2000 25 x 2.75 60 33252BKI 12 x 168 6 168.3 - - M 12 5000 2000 25 x 2.75 60 33253BKI 12 x 171 - 171 - - M 12 5000 2000 25 x 2.75 60 33254BKI 12 x 193 - 193.7 - - M 12 5000 2000 25 x 2.75 60 33256BKI 12 x 219 8 219.1 - - M 12 5000 2000 25 x 2.75 60 33258

* Except BKI 6 x 15 and BKI 6 x 18.** To achieve good sound suppression do not overload the fi tting.

�

BKI


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� BKK clips for copper pipe and BKP clips for plastic pipes

◆ BKK and BKP clips: sleeve and ball joint electrolytically zinc-plated.

◆ Provision for additional clips to be installed beneath using the BO/BOK connector

(subject to overall design loads) whilst maintaining flexibility*.

Types and dimensions of sound suppressing str ips SR Type Clip

Ø internal with liningLength of the rubber strip

in cm per clipType of rubber strip

Types and dimensions F lamco BKK cl ipsType Pipe size

ext. dia. Threaded


loadStrip

dimensionsA Code

numberin mm in N in mm in mm

Types and dimensions F lamco BKP cl ipsType Pipe size

ext. dia.Threaded

connectionMax.

working loadStrip

dimensionsA Code

numberin mm in N in mm in mm

BK 12 x 241 229 76 SR 3BK 12 x 244 232 77 SR 3BK 12 x 267 255 84 SR 3BK 12 x 273 261 86 SR 3BK 12 x 299 287 95 SR 3BK 12 x 323 311 102 SR 3BK 12 x 355 343 112 SR 3BK 12 x 368 356 116 SR 3BK 12 x 406 394 128 SR 3

BKK 6 x 12* 12 M 6 650 12 x 1.5 40 34110BKK 6 x 15* 15 M 6 650 12 x 1.5 40 34112BKK 6 x 18* 18 M 6 650 12 x 1.5 40 34114BKK 6 x 22 22 M 6 650 12 x 1.5 40 34116BKK 6 x 28 28 M 6 650 12 x 1.5 40 34118BKK 6 x 35 35 M 6 650 12 x 1.5 40 34120BKK 6 x 42 42 M 6 650 12 x 1.5 40 34122BKK 6 x 54 54 M 6 650 12 x 1.5 40 34124 BKK 8 x 68 68 M 8 1000 16 x 1.9 54 34226BKK 8 x 80 80 M 8 1000 16 x 1.9 54 34227

BKP 6 x 40 40 M 6 1500 12 x 1.5 40 32433BKP 6 x 50 50 M 6 1500 12 x 1.5 40 32434BKP 6 x 63 63 M 6 1500 12 x 1.5 40 32436BKP 6 x 75 75 M 6 1500 12 x 1.5 40 32438BKP 6 x 90 90 M 6 1500 12 x 1.5 40 32441BKP 6 x 110 110 M 6 1500 12 x 1.5 40 32444BKP 6 x 125 125 M 6 1500 12 x 1.5 40 32446

BKP 8 x 140 140 M 8 2500 16 x 1.9 54 32549BKP 8 x 160 160 M 8 2500 16 x 1.9 54 32553BKP 8 x 200 200 M 8 2500 16 x 1.9 54 32570

* Except BKK 6 x 12, BKK 6 x 15 and BKK 6 x 18.

�

BKK

�

BKP


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


Flamco BKR clips for cast-iron sewer pipes, caps, BO/BOK connection clips, BSC clips and EB eye bolts

◆ Material for the cap is black PVC.

◆ Type BO electrolytically zinc-plated.

◆ Type BOK: clip copper, sleeve and nuts electrolytically zinc-plated.

◆ BSC clip sendzimir zinc-plated and fitted with a sound suppressing rubber lining.

Types and dimensions F lamco BKR cl ipsType Int. dia.

of pipePipe size

ext. dia.

Threadedconnection

Max. working

load

Stripdimensions

A Suitable forconnection

clips

Codenumber

in mm in mm in N in mm in mm

Types and dimensions T socketsType Suitable for threaded rod Dimensions in mm Code

A B Ø C number

Types and dimensions BO/BOK connect ion cl ipsType Upper

hangingThreaded rod A Max.

working loadCode

numberBK (I) clip in mm in N

Types and dimensions F lamco BSC cl ipsType Pipe size

ext. dia.Threaded

conntectionsDimensions in mm Max.

working loadStrip

dimensionsCode

numberin mm in inches A C Ø D N in mm

Types and dimensions EB eye bol ts for BSC cl ipsType Threaded connection Dimensions

in mmMax.

working loadCode

numberH F Ø G N

BKR 8 x 50 50 60 M 8 2500 16 x 1.9 54 BO 8 31234BKR 8 x 70 70 80 M 8 2500 16 x 1.9 54 BO 8 31237BKR 8 x 100 100 112 M 8 2500 16 x 1.9 54 BO 8 31242BKR 8 x 125 125 137 M 8 2500 16 x 1.9 54 BO 8 31246BKR 8 x 150 150 162 M 8 2500 25 x 2.75 60 BO 12 31251BKR 8 x 200 200 212 M 8 2500 25 x 2.75 60 BO 12 31258

T 6 M 6 30 15 70501T 8S M 8 32 15 70512T 8 M 8 37 21 70502T 12 M 12 57 30 70504

BO 6 BK (I) 6 M 6 37 1500 80201BO 8 BK (I) 8 M 8 55 2500 80202BO 12 BK (I) 12 M 12 56 5000 80204

BOK 6 BKK 6 M 6 37 600 80211BOK 8 BKK 8 M 8 35 750 80212

BSC 3/8 17.2 3/8 17.2 12 8.5 750 20 x 1.0 33271BSC 1/2 21.3 1/2 21.3 12 8.5 750 20 x 1.0 33272BSC 3/4 26.9 1/4 26.9 12 8.5 750 20 x 1.0 33273BSC 1 33.7 1 33.7 12 8.5 750 20 x 1.0 33274BSC 11/4 42.3 11/4 42.4 12 8.5 750 20 x 1.0 33275BSC 11/2 48.3 11/2 48.3 12 8.5 750 20 x 1.0 33276BSC 2 60.3 2 60.3 12 8.5 750 20 x 1.0 33277BSC 21/2 76.1 21/2 76.1 12 11 1500 25 x 2.0 33278BSC 3 88.1 3 88.1 12 11 1500 25 x 2.0 33279BSC 110 110 - 110 12 11 1500 25 x 2.0 33280BSC 4 114.3 4 114.3 12 11 1500 25 x 2.0 33281

EB 25 - 8 M 8 46 25 12 3500 33267EB 25 - 10 M 10 46 25 12 3500 33268EB 18 - 8 M 8 36 18 9 3000 33269

BKR

T

BO/BOK

BSC

EB

�

�

�

�

�

��

�

�

�

�


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� Sound suppressing strips SR, LB mounting tape, EB eye bolts, and HM bolts

◆ SR sound suppressing lining for clips (SR 0, 1, 2 and 3) and Flamco rail (SR 4, see

page 6.2).

◆ When the SR strip is used the associated clip chosen must be larger than the outside

diameter of the pipe to be fitted.

◆ Mounting strip type LB 17 zinc-plated.

◆ Mounting strip types LB 19 and 27 electrolytically zinc-plated, completely encased in

plastic.

◆ Eye bolts EB and bolts HM are used to fix mounting strip LB to the ceiling.

Types and dimensions of SR sound suppressing str ipsType Clip Quality Shore Dimensions in mm Specifi c Code

type stripdimensions

in mm

hardness

B H D

weight

gr./cm3

number

Types and dimensions LB mount ing tapeType Dimensions in mm Max.

working loadCode

numberwidth holes A

Types and dimensions EB eye bol tsType Screw thread Details Code number

Types and dimensions HM bol tsType Screw thread Details Code number

LB 17 17 Ø 6.5 15 800 71020LB 19 19 Ø 6.5 15 800 71021LB 27 27 Ø 8.5 15 1400 71022

EB 6 x 25 M 6 x 25 screw thread and slotted hole 71024EB 8 x 20 M 8 x 20 screw thread and round hole 71027EB 6 x 50 H 6 x 50 wood screw thread and slotted hole 71023

SR 0 BM 8 10 x 1.25 LR 155/1 55º 13.5 5.7 3 1.18 71121SR 1 BK 6 12 x 1.55 LR 155/1 55º 16.5 7.2 3.9 1.29 71111 BM 10 12 x 1.55 LR 155/1 55º 16.5 7.2 3.9 1.29 71111SR 2 BK 8 16 x 1.95 LR 155/1 55º 20.5 10.5 6.3 1.29 71112 BM 12 16 x 1.95 LR 155/1 55º 20.5 10.5 6.3 1.29 71112SR 3 BK 12 25 x 2.75 LR 155/1 55º 31.5 12 6.3 1.29 71113

HM 6 x 25 M 6 x 25 hexagonal head bolt 71028HM 8 x 20 M 8 x 20 cylinder head bolt 71029

�

�

�

�

SR

LB

EB 6 X 25

EB 8 X 20

EB 6 X 50

HM 6 X 25

HM 8 X 20


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


Flamco BM clips for mounting threaded pipe, fire tube, and thin-walled steel pipe

◆ The one-piece clip can withstand a very high load.

◆ Fixing material is hidden behind the clip.

◆ Plugs are supplied with the clips.

◆ Threaded wood screw with torx connection so that these can be screwed with

a hand drill.

◆ Clip sendzimir, other parts electrolytically zinc-plated.

Types and dimensions F lamco BM cl ipsType Threaded

tubeFiretube

Thin-walledsteel pipe

Threadedconnection

Max.working

Stripdimen-

Code numberversion

nom.dia.


ext. dia.

in mm

ext. dia.

in mm

load is pull-out

force in N

sions

in mm su hk hl

BM 8 x 12 - - - 12 M 8 1300 10 x 1.2 36610 36110 36410BM 8 x 15 - - - 15 M 8 1300 10 x 1.2 36612 36112 36412BM 8 x 18 - - - 18 M 8 1300 10 x 1.2 36601 36101 36401BM 8 x 22 - - - 22 M 8 1300 10 x 1.2 36602 36102 36402BM 8 x 28 - - - 28 M 8 1300 10 x 1.2 36618 36118 36418BM 8 x 35 - - - 35 M 8 1300 10 x 1.2 36620 36120 36420

BM 10 x 42 - - - 42 M 10 2000 12 x 1.5 36705 36205 -

BM 8 x 1/4 1/4 - - - M 8 1300 10 x 1.2 36600 36100 -BM 8 x 3/8 3/8 17.2 - - M 8 1300 10 x 1.2 36601 36101 36401BM 8 x 1/2 1/2 21.3 - - M 8 1300 10 x 1.2 36602 36102 36402BM 8 x 3/4 3/4 26.9 - - M 8 1300 10 x 1.2 36603 36103 36403BM 8 x 1 1 33.7 - - M 8 1300 10 x 1.2 36604 36104 36404

BM 10 x 11/4 11/4 42.4 - - M 10 2000 12 x 1.5 36705 36205 36505BM 10 x 11/2 11/2 48.3 - - M 10 2000 12 x 1.5 36706 36206 36506BM 10 x 2 2 60.3 - - M 10 2000 12 x 1.5 36707 36207 36507

BM 8 x 25 - - 25 - M 8 1300 10 x 1.2 36630 36130 -BM 8 x 30 - - 31.8 - M 8 1300 10 x 1.2 36631 36131 -BM 8 x 38 - - 38 - M 8 1300 10 x 1.2 36632 36132 -

BM 10 x 44 - - 44.5 - M 10 2000 12 x 1.5 36733 36233 36533BM 10 x 51 - - 51 - M 10 2000 12 x 1.5 36734 36234 BM 10 x 57 - - 57 - M 10 2000 12 x 1.5 36735 36235 -

BM 12 x 64 - - 63.5 - M 12 3300 16 x 1.9 36836 36336 -BM 12 x 70 - - 70 - M 12 3300 16 x 1.9 36837 36337 -BM 12 x 76 21/2 76.1 76.1 - M 12 3300 16 x 1.9 36838 36338 -BM 12 x 83 - - 82.5 - M 12 3300 16 x 1.9 36839 36339 -BM 12 x 89 3 88.9 88.9 - M 12 3300 16 x 1.9 36840 36340 -BM 12 x 95 - - 95 - M 12 3300 16 x 1.9 36841 36341 -BM 12 x 102 31/2 101.6 101.6 - M 12 3300 16 x 1.9 36842 36342 -BM 12 x 108 - - 108 - M 12 3300 16 x 1.9 36843 36343 -BM 12 x 114 4 114.3 114.3 - M 12 3300 16 x 1.9 36844 36344 -

Plug sizes for types hk and hl:BM 8 Ø 10 x 50BM 10 Ø 12 x 60BM 12 Ø 14 x 70.

BM SU

BM HK

BM HL


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


��

◆ BMA clips supplied with a noise suppressing rubber lining.

◆ BMA clips for mounting threaded pipe, sprinkler pipe, thin-walled steel and

copper pipe.

◆ BMA clip sendzimir, other parts electrolytically zinc-plated.

◆ BMK clips for mounting copper pipe work.

Flamco BMA clips with noise suppressing rubber lining and Flamco BMK clips for fitting copper pipes

Types and dimensions F lamco BMK cl ipsType Ext. dia.

of pipeThreaded


loadStrip

dimensionsCode number

versionin mm in N in mm su hk hl

Types and dimensions F lamco BMA cl ipsType Threaded tube Copper

pipeSprink-

lerpipe

Thin-w.steelpipe

Threa-ded

connec-

Max.working

load

in N

Max.working

load*

Stripdimen-sions

Code number

versionnom.dia.

in inch.ext. dia.in mm

ext. dia.in mm

ext. dia.in mm

ext. dia.in mm

tion 20 dB(A)in N in mm su hk

BMA 8 x 12 - - 12 - 12 M 8 1300 250 10 x 1.2 37110 37010BMA 8 x 15 - - 15 - 15 M 8 1300 250 10 x 1.2 37112 37012BMA 8 x 18 - - 18 - 18 M 8 1300 250 10 x 1.2 37101 37001BMA 8 x 22 - - 22 - 22 M 8 1300 250 10 x 1.2 37102 37002BMA 8 x 28 - - 28 - 28 M 8 1300 250 10 x 1.2 37118 37018

BMA 10 x 35 - - 35 - 35 M 10 2000 400 12 x 1.5 37120 37020BMA 10 x 42 - - 42 - 42 M 10 2000 400 12 x 1.5 37105 37005BMA 10 x 54 - - 54 - 54 M 10 2000 400 12 x 1.5 37122 37022

BMA 8 x 3/8 3/8 17.2 - - - M 8 1300 250 10 x 1.2 37101 37001BMA 8 x 1/2 1/2 21.3 - - - M 8 1300 250 10 x 1.2 37102 37002BMA 8 x 3/4 3/4 26.9 - - - M 8 1300 250 10 x 1.2 37103 37003BMA 8 x 1 1 33.7 - - - M 8 1300 250 10 x 1.2 37104 37004

BMA 10 x 11/4 11/4 42.4 - - - M 10 2000 400 12 x 1.5 37105 37005BMA 10 x 11/2 11/2 48.3 - - - M 10 2000 400 12 x 1.5 37106 37006BMA 10 x 2 2 60.3 - - - M 10 2000 400 12 x 1.5 37107 37007

BMA 10 x 44 - - - 44.5 - M 10 2000 400 12 x 1.5 37133 37033BMA 10 x 51 - - - 51 - M 10 2000 400 12 x 1.5 37134 37034BMA 10 x 57 - - - 57 - M 10 2000 400 12 x 1.5 37135 37035

BMA 12 x 64 - - - 63.5 - M 12 3300 700 16 x 1.9 37136 37036BMA 12 x 70 - - - 70 - M 12 3300 700 16 x 1.9 37137 37037BMA 12 x 76 21/2 76.1 - 76.1 - M 12 3300 700 16 x 1.9 37138 37038BMA 12 x 83 - - - 82.5 - M 12 3300 700 16 x 1.9 37139 37039BMA 12 x 89 3 88.9 - 88.9 - M 12 3300 700 16 x 1.9 37140 37040BMA 12 x 95 - - - 95 - M 12 3300 700 16 x 1.9 37141 37041BMA 12 x 102 31/2 101.6 - 101.6 - M 12 3300 700 16 x 1.9 37142 37042BMA 12 x 108 - - - 108.5 - M 12 3300 700 16 x 1.9 37143 37043BMA 12 x 114 4 114.3 - 114.3 - M 12 3300 700 16 x 1.9 37144 37044

BMK 8 x 12 12 M 8 1000 10 x 1.2 38610 38110 -BMK 8 x 15 15 M 8 1000 10 x 1.2 38612 38112 38412BMK 8 x 18 18 M 8 1000 10 x 1.2 38614 38114 -BMK 8 x 22 22 M 8 1000 10 x 1.2 38616 38116 38416BMK 8 x 28 28 M 8 1000 10 x 1.2 38618 38118 38418BMK 8 x 35 35 M 8 1000 10 x 1.2 38620 38120 38420

BMK 10 x 42 42 M 10 1700 12 x 1.5 38622 38122 38422BMK 10 x 54 54 M 10 1700 12 x 1.5 38624 38124 38424

BMK 12 x 68 68 M 12 3000 16 x 1.9 38826 38326 -BMK 12 x 80 80 M 12 3000 16 x 1.9 38827 38327 -

Plug sizes for types hk and hl:BM 8 Ø 10 x 50BM 10 Ø 12 x 60BM 12 Ø 14 x 70.


BMA SU

BMA HK

BMK SU

BMK HK

BMK HL


Ce

ilin

g,

Wa

ll a

nd

Flo

or

Cli

ps


��


Flamco DP clips and pipe support

◆ DP double pipe clips are supplied with a reinforced back plate with a slot

of 18 x 8 mm.

◆ Loosening or tightening the bolt is possible with spanner or screwdriver.

◆ Pipe support fitted with slots 30 x 6.5 mm for attaching the DP double pipe clip and a

slot 20 x 8.5 mm for mounting to the floor.

◆ DP pipe clips are adjustable for depth.

Types and dimensions for F lamco DP double cl ips without l in ingType Threaded tube Thin-

walledA B Code

numberB Code

numberB Code

numbernom.dia.


steel pipeext. dia.in mm in mm in mm in mm in mm

Types and dimensions F lamco DP s ingle cl ipsType Threaded tube Thin-

walledB Code

numberB Code

numberB Code

numbernom.dia.


steel pipeext. dia.in mm in mm in mm in mm

Type and dimensions of F lamco pipe supportType Dimensions in mm Code number

A B C H

Types and dimensions for F lamco DP double cl ips with l in ingType Threaded tube Thin-walled Dimensions in mm Code number

nom.dia.

in inchesext. dia

mm

steel pipeext. dia.in mm A B

DP 15 - - 15 60 79 - 62 38016 66 - 49 38017 - -DP 1/2 1/2 21.3 22 60 82 - 65 38018 69 - 54 38019 - -DP 3/4 3/4 26.9 28 60 80 - 70 38020 68 - 57 38021 - -DP 1 1 33.7 35 60 83 - 63 38022 67 - 60 38023 - -

DP 15 - - 15 70 80 - 62 38000 68 - 52 38001 59 - 46 38002DP 1/2 1/2 21.3 22 70 82 - 66 38003 71 - 55 38004 61 - 49 38005DP 3/4 3/4 26.9 28 70 78 - 70 38006 69 - 59 38007 57 - 50 38008DP 1 1 33.7 35 70 96 - 74 38009 69 - 62 38010 59 - 54 38011DP 11/4 11/4 42.4 42 70 89 - 78 38012 79 - 67 38013 - -DP 11/2 11/2 48.3 - 70 92 - 81 38014 72 - 60 38015 - -

DP 15 - - 15 67 - 50 38040 58 - 44 38041 55 - 46 38042DP 1/2 1/2 21.3 22 70 - 55 38043 59 - 47 38044 60 - 47 38045DP 3/4 3/4 26.9 28 69 - 59 38046 60 - 50 38047 55 - 46 38048DP 1 1 33.7 35 85 - 63 38049 60 - 53 38050 52 - 46 38051DP 11/4 11/4 42.4 42 78 - 66 38052 69 - 57 38053 - -DP 11/2 11/2 48.3 - 82 - 70 38054 72 - 60 38055 - -

Pipe support 65 70 38 200 71770

DP 15 - - 15 60 54 - 69 38030DP 1/2 1/2 21.3 22 60 57 - 68 38031DP 3/4 3/4 26.9 28 60 60 - 67 38032DP 1 1 33.7 35 60 65 - 77 38033

�

�

�

�

�

�

�

DP

DP

PIPE SUPPORT


Ce

iling

, Wa

ll an

d F

loo

r Clip

s


�� RWK, RWK-G and RWS clips

◆ Particularly suitable for visible wall mounting with wire tack (diameter 8 mm).

◆ RWK-G fitted with noise-reducing EPDM rubber insert for temperatures

from – 40 °C to + 120 °C.

◆ With six-sided nut with saw slot for quick and easy fitting. RWS wtih two six-sided

nuts with saw slot.

◆ RWK, RWK-G and RWS clips are electrolytically-galvanized.

Types and dimensions for RWK cl ipsType Ext. dia.

of pipeThreaded tube Length of

wire tackStrip

dimensionsCode

numberin mm in inches Ø 8 mm in mm

Types and dimensions for RWK-G cl ipsType Ext. dia.


wire tackStrip

dimensionsCode


Types and dimensions for RWS cl ipsType Ext. dia.


wire tackStrip

dimensionsCode


RWK

RWK-G

RWS

RWK 3/8 17.2 3/8 50 20 x 2 51411RWK 1/2 21.3 1/2 50 20 x 2 51412RWK 3/4 26.9 3/4 50 20 x 2 51413RWK 1 33.7 1 50 24 x 2.5 51414RWK 11/4 42.4 11/4 50 24 x 2.5 51415RWK 11/2 48.3 11/2 50 24 x 2.5 51416RWK 2 60.3 2 75 40 x 3 51417

RWK-G 3/8 17.2 3/8 50 20 x 2 51421RWK-G 1/2 21.3 1/2 50 20 x 2 51422RWK-G 3/4 26.9 3/4 50 20 x 2 51423RWK-G 1 33.7 1 50 24 x 2.5 51424RWK-G 11/4 42.4 11/4 75 24 x 2.5 51425RWK-G 11/2 48.3 11/2 75 24 x 2.5 51426

RWS 3/8 17.2 3/8 80 20 x 2 51401RWS 1/2 21.3 1/2 80 20 x 2 51402RWS 1/2 21.3 1/2 200 20 x 2 51409RWS 3/4 26.9 3/4 80 20 x 2 51403RWS 1 33.7 1 80 20 x 2 51404RWS 11/4 42.4 11/4 80 20 x 2 51405RWS 11/2 48.3 11/2 80 20 x 2 51406


CEILING, WALL AND FLOOR CLIPS

◆ CONTENTS PAGE

◆ BS clips with rubber lining 1.2/1.3

◆ BS clips without rubber lining 1.4

◆ BK clips 1.6/1.7

◆ BM clips 1.8/1.9

◆ Tables 1.10/1.35

Copyright Flamco UK Limited. No part of this publication may be reproduced or

published in any way without explicit mention of the source. The data listed are

solely applicable to Flamco products. Flamco UK Limited shall accept no liability

whatsoever for incorrect use, application or interpretation of the technical informa-

tion. Flamco UK Limited reserves the right to make technical alterations

Flamco UK Limited conditions of sale apply.

18502589

��Flamco UK Limited

Unit 4, St. Michael’s Road

Lea Green Industrial Estate

St. Helens, Merseyside

WA9 4WZ

Tel.: +44 (0) 1744 818100

Fax: +44 (0) 1744 830400

[email protected]

www.flamco.co.uk

BSA

BSF-D

KB

BK

BMA

There is more information on the CD that

accompanies this brochure.

18502589 h1 plafond uk -...

Documents