18GHT GLOBAL HIGH PERFORMANCE TRASH

Global Pump® High Performance Trash pumps are specifically designed to effectively handle a wide-range of liquids from water to sewage and sludge that can contain solids and other material.

Global Pump High Performance Trash pumps provide a dependable, highly efficient solution. The model 18GHT is capable of achieving maximum flows of 15,000 gpm (3,400 m3/h) and maximum total head of 177’ (54 m) while handling solids up to 4.5” (114.3 mm) in diameter.

The standard 18GHT is powered by a water-cooled, 6-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.

FEATURES OPTIONSGlobal Pump’s rugged, heavy duty pumps are engineered specifically for portable application

Mechanical seal with glycol (biodegradable optional) quench allows the pump to start and run dry

Available with a diaphragm priming system Global Pump’s Environmental Box separates and silences air exhaust and returns liquid to the pump suction.

Non-return valve uses only a single moving part to allow full flow with minimal restriction

Fuel cubes for extended run times and/or remote location as required

Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control

Sound attenuated enclosure options

Fully guarded coupling Hose racks, accessory containers and other custom features available as required

Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure

Wide range of suction and discharge fittings including Global Pump’s own “QD” Quick Disconnect fittings and accessories

Skid-mounted formats with tie downs, lifting bail, and fork pockets

l/s

m³/hr

US gpm

Po

wer

- hp

Hea

d -

ft

Hea

d -

mkW

0

250

10

300

200

100

0

20

30

40

50

3750350032503000275025002250200017501500125010007505002500

0 100 200 300 400 500 600 700 800 900 1000

50

100

150

1700016000150001400013000120001100010000900080007000600050004000300020001000

1700016000150001400013000120001100010000900080007000600050004000300020001000

1200 rpm

1100 rpm

1000 rpm

900 rpm

800 rpm

30.6

30.6

52.5

52.5

68

68

77

77

80.9

80.9

80.9

80.9

76.8

76.8

64.9

64.9

PUMP MATERIALCasing Cast Iron (CD4MCu is an option)Impeller Cast Iron (CD4MCu is an option)Bearing Housing Cast IronBearing Lubrication GreaseShaft/Shaft Sleeve Steel/FNC Treated SteelSeal Silicon Carbide on Silicon CarbideChassis/Fuel Cell SteelNon-Return Valve Nitrile Fitted Cast Iron

SPECIFICATIONSConnections 18 ” x 14” (450 mm x 350 mm) ANSI

FlangesMax Pump Speed 1,200 rpmMax Flow 15,000 gpm (3,400 m3/h)Max Head 177’ (54 m)Max Static Priming Lift 28’ (8.5 m)Temperature Limit 160° F (70° C)Solids Handling Capability 4.5” (114.3 mm)Max Casing Pressure 125 psig (862 kPa)Fuel Cell 5 gallon (18.9 liter) Test TankDry Weight 15,500 lbs

10162 East Coldwater Road, Davison, MI 48423Tel: 810.653.4828 Fax: 810.658.0632

1.866.360.PUMP www.globalpump.com

GLOBAL PUMP

© 2019 Global Pump

Specifications reflect model pictured, and are subject to revision without notice. Global Pump is not liable for any consequential, incidental or indirect damages relating to these specifications.

18GHT GLOBAL HIGH PERFORMANCE TRASH

18GHT