18.trailering

TRAILERING 1011

Boat Stands Brownell 1012 - 1015

Boat CoversCarver Boat Covers 1016 - 1020

Transhield Shrinkable Boat Covers 1021

Boat Cover Accessories 1022 - 1023

Trailering

Tie Downs 1022 - 1024

Trailer Jacks 1025

Trailer Winches 1026 - 1029

Trailer Lights 1029 - 1032

Trailer Wiring 1033 - 1035

Trailer Rollers 1036 - 1037

Trailer Parts 1037 - 1043

Trailer Locks 1043 - 1045

Keel Guard & Motor Supports 1046 - 1048

Motor Carriers / Launching Wheels / Dollies 1048 - 1049

Lettering / Totes 1049

®

The Brownell Advantage:

The ABYC Standards and Technical Information Reports for Small

5 Boat Rock Road | Mattapoisett, MA 02739 | Tel. +1 508.758.3671 | Fax 508.758.3574 | Toll-Free (US & Canada) 1.800.533.8433

Safe. Reliable. Legendary Durability.

Visit www.boatstands.com to �nd more information on Brownell Boats Stands products.

BEST QUALITYBEST PRICE

Brownell Boat Stands offers a full range of boat storage and shop equipment.

BOAT STANDS BOAT RACKS DOLLIES

Would you do this under any

other boat stand but Brownell?

BROWNELL BOAT STANDS“Professionals Choose Brownell”

by

by

Choose Only Authentic Brownell Boat Stands

Compare Brownell Quality with the competition:

Brownell

Solid Center

Rod

Lifetime Warranty Don’t take a chance!

Steel Handle

CastHandle

Hollow Center

Rod

Others

MADE IN

USA

1014

TRAILERING

Brownell Adjustable Boat Stands

These strong, steel, adjustable stands eliminate the need for cumbersome cradles and wooden

shoring. Use wooden keel blocks to support the weight of the boat and Brownell stands to

stabilize. The stands nest together making storage easy.

Tops Only Length Top Style

BBS VEE TOP-16 16" Vee / Blue

BBS VEE TOP-22 23" Vee / Gray

BBS VEE TOP-27 27" Vee / Orange

BBS FLAT TOP-16 16" Flat / Gray

BBS FLAT TOP-27 27" Flat / Orange

BBS O-PLY Orange top pad only

Sailboat series

Part # Min / Max Height Length / Top Weight

BBS SB-1FL 64" / 79" 27" Flat / Orange 54 lbs



BBS SB-4FL 24" / 36" 23" Flat / Gray 30 lbs

BBS SB-1V 64" / 79" 27" Vee / Orange 54 lbs



BBS SB-4V 24" / 36" 23" Vee / Gray 30 lbs

Sailboat Stands

Part # Min / Max Height Length / Top Weight

BBS MB-0XFL 54" / 72" 27" Flat / Orange 46 lbs

BBS MB-0FL 41" / 58" 27" Flat / Orange 39 lbs



BBS MB-3FL 25" / 38" 23" Flat / Gray 34 lbs

BBS MB-4FL 18" / 25" 16" Flat / Blue 37 lbs

BBS MB-0V 41" / 58" 27" Vee / Orange 39 lbs

BBS MB-1V 33" / 50" 27" Vee / Orange 38 lbs

BBS MB-4V 18" / 25" 16" Vee / Gray 21 lbs

Motorboat Stands

Part # Min / Max Height Top Style Weight

BBS K-4 15" / 24" Flat 22 lbs

Keel Stands

Load rated: 10,000 each

Part # Type H x W x D Weight

BBS BRB16 Bow 16" x 24.5" x 30" 69 lbs

BBS BRB Bow 28" x 24.5" x 30" 69 lbs

BBS BRS36** Stern 31.5" x 36.5" x 30" 75 lbs

BBS BRS41 Stern 31.5" x 41.5" x 30" 75 lbs

** Limited Quantity

Bow / Stern Boat Rack Stands

Load rated: 13,000 lbs per set

BRS SeriesBRB

Motorboat series

Boat Stands

FLAT TOP 16FLAT TOP 27VEE TOP-16 VEE TOP-22 VEE TOP-27

1015

TRAILERING

Boat Stands

Brownell Molded Flat Top Pad

Mount to any Brownell stand or adjustable

trailer top

Provides drainage for moisture elimination

Fasteners included

BBS TLC-PAD

Brownell

H/D Hydraulic Stern Drive Jack

Adjusts on 3 axes to make stern drive removal

and installation an easy one man job

Weight: 175#

Lift Capacity: 1,000#

Lift Range: 19" x 34"

BBS SD-1**

** Limited Quantities

Part # Min / Max Height Top Style Weight

BBS KS1-V 20" / 33" V-Top 35 lbs

BBS KS1-FL 20" / 33" Flat-Top 35 lbs

BBS KV-TOP Orange Vee Top (keel series only)

BBS K-TOP Orange Flat Top (keel series only)

Brownell Stackable Keel Stands

Load rated: 10,000 each

Stackable for easy storageThe following is a list of Do’s and Don’ts to insure that safety is not being

compromised. This list should in no way be construed as totally complete

rather should be in addition to safety precautions already taken.

1) Do not use boat stands to suspend a boat in mid-air.

2) Use blocking along center line of the boat to rest all the weight on.

3) Use the safety chains on all side sailboat stands, chaining the pairs

together from port to starboard.

authorized persons to move or adjust boat stands when in use.

5) Use a pair of boat stands, one placed port and one placed

starboard for each 8' of boat’s length.

heavy sailboats.

7) Never allow anything (such as canvas) to be tied to the boat stand.

9) In windy or open areas, remove masts when boats are

placed on boat stands.

10) Apply boat stands so the adjusting screw is as perpendicular

to the hull as possible when they are outboard.

11) Replace any boat stand that is damaged or rusted badly.

12) Keep screws greased.

13) If it is necessary to remove a boat stand from under a boat,

14) Do not use boat stands for jobs they were not intended for.

15) Do not use boat stands to hold boats up when in transit

(i.e. on a truck or trailer).

16) If boats are left on boat stands unattended for a long time,

they should be checked for security and locked.

17) Use plywood under boat stands if the ground is soft.

20) Do not place blocks on top of boat stands to increase their reach.

Brownell Pontoon Dolly

The safest, most convenient way to

display or repair pontoon boats

Ideal for show rooms, boat shows,

repair shops and storage

Three 4” x 2” phenolic wheels with casters – won’t scratch

High density foam surface protects against scratches

Capacity: 2,000 lb

Dimensions 19” x 19.5” x 9”

Weight 30 lb.

BBS PD-2

Brownell

Stern Drive Jack

Makes installation and removal an

easy one-man job

Height from ground: 18" to 46"

Capacity: 350 lbs

BBS SD-2

Joined seams are folded four-ply, no raw edges

Double stitch construction for added strength and durability

Weather resistant anti-wick thread used throughout construction

Double reinforced tie-down loops sewn into hem for the purpose of tying the cover down

Made in a state-of-the-art manufacturing facility in South Carolina using nearly 95%

domestically-produced component materials.

100% Marine-grade 8 oz polyester is strong and durable

Highest tear strength available

UV and mildew resistant with excellent resistance to fading

Extremely water repellent, yet breathable to help allow interior moisture to escape

5 Year Warranty

Made in USA

All our stock covers come in Poly-Guard gray

(see below for information ordering other colours)

* Trailerable boat covers must be properly installed

and tied down. (Tiedowns sold separately) See

boat cover accessories on page 1008.

Canadian Drop Ship Program

Carver Custom-Fit covers can now be drop-shipped directly to

you, the dealer, in 10-14 days from receipt of cover order at Carver.

This program now allows you to offer Carver's assortment of colour

and fabric combinations in Custom-Fit cover with NO STOCK.

Price Includes:Brokerage and Freight

Search Carver's Online Selection Guide

cover part number.

www.carvercovers.com

Better known as “semi-custom” covers, Styled-to-Fit boat covers are the best selling, most

popular category of covers. The Styled-to-Fit boat covers are designed to accommodate

boat style. Styled-to-Fit boat covers are great for travel*, mooring and storage.

Motor covers are sewn into outboard model boat covers

Trailerable*

1017

TRAILERING

Carver V-Hull Runabouts - O/B

Cover accommodates hand/bow rails & windshields:

- 14’6” to 15’6” boats - up to 4” hand rails

- 16’6” to 19’6” boats - up to 8” bow rails

- Boats 20’6” and up - up to 11” bow rails

Attached motor cover

Outboards Centre Line Length Beam Width

CAR 77014P-10 14' 6" 74"

CAR 77015P-10 15' 6" 80"

CAR 77016P-10 16' 6" 86"

CAR 77017P-10 17' 6" 90"

CAR 77018P-10 18' 6" 96"

CAR 77019P-10 19' 6" 96"

CAR 77020P-10 20' 6" 102"

Carver V-Hull Runabouts - I/O

Stern Drives Centre Line Length Beam Width

CAR 77116P-10 16' 6" 86"

CAR 77117P-10 17' 6" 90"

CAR 77118P-10 18' 6" 96"

CAR 77119P-10 19' 6" 96"

CAR 77120P-10 20' 6" 102"

CAR 77121P-10 21' 6" 102"

CAR 77122P-10 22' 6" 102"

CAR 77123P-10 23' 6" 102"

Carver V-Hull Cuddy Cabin Boats - I/O

Cover accommodates bow rails:

- 18’6 to 20’6” boats - up to 11” bow rails

- Boats 21’6” and up - up to 24” bow rails


CAR 77719P-10 19' 6" 96"

CAR 77720P-10 20' 6" 102"

CAR 77721P-10 21' 6" 102"

CAR 77722P-10 22' 6" 102"

Carver V-Hull Fishing Boats

No Motor Hood - Wide Series

No Motor Hood Centre Line Length Beam Width

CAR 70112P-10 12' 6" 70"

CAR 70113P-10 13' 6" 72"

CAR 70114P-10 14' 6" 72"

CAR 70115P-10 15' 6" 74"

CAR 70116P-10 16' 6" 76"

Carver V-Hull Fishing Boats - Wide Series


Motor Hood Centre Line Length Beam Width

CAR 71112P-10 12' 6" 70"

CAR 71113P-10 13' 6" 72"

CAR 71114P-10 14' 6" 72"

CAR 71115P-10 15' 6" 74"

CAR 71116P-10 16' 6" 76"

CAR 71117P-10 17' 6" 85"

Carver Styled-to-Fit Boat Covers

boat illustration and description that best matches your boat.

Performance Poly-Guard® fabric

Gray in colour

styled-to-Fit cover part number.

Boat Covers

1018

TRAILERING

Carver V-Hull Fishing Boat w/Side Consoles


Coverage provided for bow mounted trolling motor and side

console with windscreen. Accommodates console hight to 14"


CAR 72216P-10 16' 6" 92"

CAR 72217P-10 17' 6" 92"

CAR 72218P-10 18' 6" 92"

Carver Jon Style Bass Boat


pedestal seats. Designed for single console. If motor is mounted

on a jack plate order one size larger


CAR 77814P-10 14' 6" 68"

CAR 77815P-10 15' 6" 70"

CAR 77816P-10 16' 6" 72"

CAR 77817P-10 17' 6" 74"

Carver Center Console Bay Style Fishing Boats

Covers up to 55” center console and up to 8” bow rails



CAR 71018P-10 18' 6" 94"

CAR 71020P-10 20' 6" 96"

Carver V-Hull Fishing Boats - Narrow Series



CAR 70122P-10 12' 4" 60"

CAR 70124P-10 14' 4" 68"

Boat Covers

Carver Open Jon Boats



CAR 74198P-10 10'6" 58"

CAR 74200P-10 12' 6" 58"

CAR 74201P-10 14' 6" 60"

CAR 74201EXP-10 14' 6" 72"

Carver Whaler Style w/Bow & Side Rails


a side or centre consol


CAR 71613P-10 13' 6" 70"

CAR 71614P-10 14' 6" 70"

CAR 71615P-10 15' 6" 78"

CAR 71616P-10 16' 6" 78"

CAR 71617P-10 17' 6" 78"

1019

TRAILERING

Boat Covers

No motor hood

No Motor Hood Centre Line Length Beam Width

CAR 7INF8BP-10 8' 6" 60"

CAR 7INF9BP-10 9' 6" 60"

CAR 7INF10BP-10 10' 6" 66"

CAR 7INF11BP-10 11' 6" 68"

No motor hood

Cover accommodates console hight up to 48"

1/4" draw rope encased in hem

Part # Centre Line Length Beam Widtho

CAR INFCC13DRP-10 13' 6" 78"

CAR INFCC14DRP-10 14' 6" 78"

CAR INFCC15DRP-10 15' 6" 81"

CAR INFCC16DRP-10 16' 6" 90"

CAR INFCC17DRP-10 17' 6" 98"

No motor hood

Part # Centre Line Length Beam Width

CAR 7INF8P-10 8' 6" 56"

CAR 7INF9P-10 9' 6" 60"

CAR 7INF10P-10 10' 6" 66"

CAR 7INF11P-10 11' 6" 68"

CAR 7INF12P-10 12' 6" 70"

CAR 7INF13P-10 13' 6" 74"

CAR 7INF14P-10 14' 6" 74"

CAR 7INF15P-10 15' 6" 76"

CAR 7INF16P-10 16' 6" 82"

Part # L x H x W Fits

CAR 70001P-10 21" x 21" x 13" MC-10 HP

CAR 70002P-10 25" x 21" x 13" MC-40 HP

CAR 70003P-10 25" x 26" x 19" MC-100 HP

CAR 70004P-10 30" x 40" x 24" MC-200 HP

CAR 70006P-10 30" x 40" x 24" MC-250 HP

CAR 70010P-10 16" x 11" x 11" Electric

Carver Motor Covers

Each motor cover has 1/4” draw rope sewn into

measure your outboard and determine those

dimensions that most closely match your particular

model

Performance Poly-Guard fabric - Grey

Carver Universal Centre Console Covers

Console covers provide protection for

the console, electronic equipment and

controls. Additionally, the new design

now accommodates the forward console

seat. A heavy-duty adjustable strap system

shock cord in the hem.

Performance Poly-Guard fabric - Grey

Part # Centre Line Length Beams Up To

CAR 84002-10 Medium D: 45 x W: 36 x H: 46"

CAR 84003-10 Large D: 50 x W: 40 x H: 60"

1020

TRAILERING

Carver

Bimini Top Brace Kits

Bimini top braces are specially

designed to hold your top up

and out of the way when top

is folded and not in use. Each

package contains 2 aluminum

braces which can be cut down

to the desired length, 2 deck

hinges, 2 unique hinged jaw slides that make installation easy

by eliminating the need to disassemble the main bow. All screws

necessary for mounting are included. 1 pair per package

48" Brace kit (Aluminum) 62010

22" to 44" Adjustable brace kit (Aluminum) 62014

CAR 62010 48"

CAR 62014 22" to 44" adjustable

Carver Buggy Style Pontoon Top Frame Kit

Frame ONLY - Ready to assemble

Top height: 48"

Top length: 8'

Fits deck widths: 96" or 102"

CAR 50510

Carver 2 Bow Round Tube Bimini Top Kits

Ideal for: V-Hull Fishing Boats, Jon Style Bass Boats,

Top height: 42"

Top length: 5'6"

Performance Poly-Guard fabric

Part # Fits Widths

CAR V4247U 47" to 53"

CAR V4257U 53" to 62"

CAR V4267U 63" to 73"

CAR V4278U 74" to 84"

Boat Covers

Carver Universal Tower Top

Universal tower clamps accommodate a wide range of tower

diameters from 1-7/8" up to 2-3/8" making these tower bimini

among the easiest to install. Available in premium Sunbrella 100%

marine acrylic with matching zippered storage boot and 7/8" heavy-

wall anodized aluminum tubing. Each tower bimini comes standard

with one set of tower clamps, high grade domestic black nylon

No need to drill into towers

Fits widths 74" to 82"

36" high and 5' long

CAR A2678UBD-02 Black

Carver

available in Hypalon® and PVC/Vinyl. Kits will

accommodate any size Carver round tube bimini top. Each kit

contains 4 D-Rings, 2 universal deck hinges, special adhesive and

detailed instructions

CAR HPKIT Hypalon

CAR VLKIT PVC/Vinyl

1021

TRAILERING

Boat Covers

PWC - Large

TRA F1075.1 121"-140"

Pontoon Universal

TRA F1063 20', 4' height




Over Wake Tower

TRA F10520 16'-18' Standard

TRA F10519 18'-20' Standard

TRA F1083.1 20'-22' Standard



TRA F1079 20'-22' Forked nose



V-Hull

TRA F1050 14'-16'

TRA F1051.1 16'-18'

TRA F1052 18'-19'

TRA F1053 19'-21'

TRA F1054 21'-23'

TRA F4556.0 23'-25'

TRA F1055.0 25'-27'

Transhield Shrinkable Boat Covers

Patented fabric removes water vapor, keeping boat dry

Reusable up to two storage seasons

Reusability offers the ability to remove cover to work on

boat during off season

No tape applied to boat, making removal quick and easy

Suitable for transport

Transhield Boat Vents

Transhield offers snap-together boat vents and

adhesive boat vents. The snap-together boat

vent provides a watertight seal and allows 1.5

TRA P0076 Snap vent

TRA P0360 Adhesive vent

Transhield Accessories

TRA M0400 Zipper door cover, W: 33" x H: 28"

TRA SPL 3/4" webbing, 2100' spool

TRA T0488 2" patch tape, white hull, 108'

TRA T0496 4" patch tape, white hull, 108'

Transhield Heat Tool Kit

Rapid shrink heat tool kit includes:

Heat tool body (Self-igniting)

25' propane hose

Adjustable regulator

Carry case

Safety glasses & gloves

Training CD

TRA G0300 Heat tool

Transhield is a patented alternative to conventional wrapping

shrink-wrap products, vibration during transport is a leading of cause of

Transhield virtually eliminates the problem with its unique non-abrasive non woven layer.

without causing moisture damage, allowing boats to be stored outdoors until they have been sold and can be used by the customer for up to two years after the sale. Transhield transportation and outdoor custom storage covers can be tied to boats for easy removal and inspection by the dealer...or the buyer.

The Shrinkable Fabric for Superior

Shipping and Storage Protection

of Protection

1022

TRAILERING

Garelick Boat Cover Support Pole

Keeps weather covers tight

Eliminates pockets that trap water

Three style tips - rubber, pin for grommets,

dot fasteners - Snap on

Anodized aluminum resists corrosion

30” to 60”

GAR 94320

Carver Rope Ratchet

No more fumbling with knots to secure your cover

or elastic straps that come loose. The rope ratchet

allows you to tighten your cover to proper tension then

releases with a convenient thumb lever. Accommodates

CAR 61020

Carver

Support Pole Kit w/Vent

Replace a conventional support pole with

one that provides an air vent to reduce

moisture, heat and mildew under the cover.

Includes a 4 piece adjustable (22 to 70")

anodized aluminum pole, boat vent and

simple installation instructions.

CAR 60002 Pole kit w/vent

Parts:

CAR VENT II Vent only

Carver

Support Pole Kit

Anodized aluminum construction

Keeps weather covers tight

Eliminates pockets that trap water

4 piece adjustable (22 to 70")

Pole has a snap and vinyl end

CAR 60000 Pole kit only

Accessories:

CAR VENT II Vent only

Carver Boat Cover Support System

Eliminates all possible areas

that could collect water and

allow it to pool. This system

is designed for simplicity with

two pre-installed, adjustable

20-foot straps that snap quickly

to the rear tow hooks and one

40-foot adjustable strap to

two systems can be easily joined to create a "frame" for the boat

cover. Each system comes with one adjustable (22" to 70") support

pole with snap and vinyl end, system center, strap set and simple

installation instructions.

CAR 60008

Taylor

Support Pole Kit

This fully adjustable support pole is 3 support

poles in one. Come with a male canvas snap,

a grommet tip, and a plain end cap. So, if you

have a female canvas snap or a grommet on

your boat cover, you can get a support that will

work with your cover. The pole is aluminum, with a durable

plastic adjuster to set the correct height for your cover.

TAY 11992

VICO Boat Cover Vent

Boat Vent II is fast and easy to install and can

be added to virtually any custom or semi custom

cover. Just follow the included instructions and

use the supplied template to quickly and easily

install the vent in your cover.

VCO BV2 BLK

VICO Boat Cover Poles

Tested to hold up to 170 lbs

Die cast collar and stainless steel components

Aluminum tubing is anodized, heat treated, and has a

Fully synthetic TPR rubber grey bottom crutch tips

3 tip options: snap, swedge, or plug

VCO X28A-2 TIP 28"

VCO X47A-2 TIP 47"

VCO X59A-2 TIP 59"

VCO X70A-2 TIP 70"

VICO Ratchet Tie Downs

To use, just tug on the rope until it is tight,

and tie off the remaining rope. To release, pull

on the rope the same as when tightening it

and release the trigger lock.

Lightweight, durable and extremely tough

Micro 1/8" Ratchet

Includes 6' of 1/8" rope and hook

VCO RAR-16-011 Use 1/8" rope

1/4" Ratchet

VCO RATCHET-1/4 Use 1/4" rope RATCHET-1/4

Boat Cover Accessories

1023

TRAILERING

Epco Gator Tuff Transom Tie Downs

2" wide weather-resistant polypropylene webbing

Vinyl coated black hook, zinc plated 'S' hook and hardware

Easy-lock over centre painted buckle

with hook and loop pad to protect

surfaces and secure loose ends

Max load: 800 lbs

EPC PTTD-2 2” x 2’, 2/pkg

EPC PTTD-4 2” x 4’, 2/pkg

Epco Gator Tuff Transom Tie Downs

2" wide weather-resistant

polypropylene webbing

Heavy gauge zinc plated hardware

and self-tightening, easy-lock over

centering buckle

Hook and loop pad to protect surfaces

and secure loose ends

Max load: 1200 lbs

EPC BTDT-2 2” x 2’, 2/pkg



Epco Gator Tuff Transom Tie Downs w/Vinyl Pads

2" wide weather-resistant polypropylene webbing


and vinyl coated hooks

Easy-lock over centering buckle

with large coloured vinyl pad to

protect surfaces

Hook & loop to secure loose ends

Max load: 1200 lbs

EPC BTDTP-2 2” x 2’, 2/pkg

EPC BTDTP-4 2” x 4’, 2/pkg

Epco Transom Tie Downs

4' stainless adjustable transom ratchet

1” wide weather-resistant nylon webbing

Vinyl coated hooks, stainless quick

release and rapid ratchet mechanism

Max load: 1200 lbs

EPC TR-4S 2/pkg

Epco Gator Tuff

Transom Tie Downs - Retractable

Permanently mounted to your trailer

Mounting bolts included

Easy lift release

Rubber grip handle

Spool mode

48" overall length

EPC 415 48", 2/pkg

LifeSafe Boat Cover Repair Tape

Prolong the life of your boat cover

Adds strength and tear-resistance along seams,

stress points, creases and corners

Extra strong tape resists stretching, wrinkling

and tearing

LIF RE1136 8-3/4" x 10'

Sea-Dog Deck Mount Bow Socket

Recessed base design allows for a water tight seal

without the use of gaskets.

SED 327410-1

Sea-Dog Rail Mount Bow Socket

the use of fasteners. The rail mount bow sockets

aid in assembling a rounded support structure for

a cover and can be easily removed from the boat

when the cover is not in use.

SED 327400-1

Carver Boat Cover Reinforcement/Repair Kit

This repair kit is an ideal way to prolong the life

of your boat cover. Kit includes one yard self

adhesive material. Use it to add extra padding

to stress points from windshields, trolling

motors, etc. or to patch wear areas and tears that

may develop over time. Simply cut to desired

size and apply to clean, dry surface

CAR 61050

Carver Boat Tie Down Kit

when trailering. Constructed of heavy-duty 1" black

polypropylene webbing and convenient quick-release

buckles. Unlike bungee cords, these durable tie-downs

don't stretch, so they won't tear your cover or damage

your boat. Each kit contains twelve 8-foot straps.

CAR 61000

Tear Aid pg 430

Boat Cover Accessories / Tie Downs

1024

TRAILERING

Tie Downs

Epco Gator Tuff Ratchet Strap

1” x 15’

Stainless ratcheting handle

4000 lbs test webbing

EPC R15S Each

Boatbuckle

S/S G2 Transom Tie Down - Retractable

Sleek contour styling

Comfortable SUR-Grip rubber coated handle and

release lever

One-touch web release

Strong-3,000 lb./pair rated capacity

Easy access dual release lever

Simple, one hand operation

Adapts to any mounting

BOB F14256 2/pkg

Epco Gator Tuff Gator Skins

A long lasting protective panel made of high

durability plastisal

Easy to use, just slide strap through

slits provided on cushion for adjustable

protection anywhere on the strap

Fits webbing 1”, 1 1/2”, & 2”

EPC PAD-2 2/pkg

Epco Gator Tuff

Gunwale Tie Downs

2" wide nylon webbing


Captive 'J' hook

Self-tightening, easy-lock over centering buckle

Hook & loop pad to protect surfaces and secure loose ends

Max load: 1200 lbs

EPC BTD0P 2” x 10’, 2/pkg



BoatBuckle Transom Tie Down - Retractable

Retractable transom tie-down

Self-storing retractable 2" wide

strap which can be extended to a full 48"

High impact boot and protective plastic coating on the S hook

Ratchet snugs tight with an easy one hand operation

Submersible and water resistant

BOB F08893 2/pkg

Epco Gator Tuff

Ratchet Cam Buckle

High strength-low elongation, 100%

polyester, for maximum cut and abrasion

resistance

2 x 15’ ratchets with rubber padded

handle

2 x 6’ cambuckles also rubber coated

EPC R66525

Epco Utility Tie Downs

1-1/4" x 16' tiedowns with rubber coated

ratchets and hooks

100% polyester straps

Rated capacity: 2,500 lbs

EPC R66033 2/pkg

Sea-Dog Strap Guards

Injection molded nylon

SED 756012-1 For 1-1/2" straps, each

SED 756020-1 For 2" straps, each

Fulton Gunwale Ratchet Tie Downs

Vinyl coated J-hooks

Sold each

333 lbs load capacity &

1,000 lbs break strength

FUL 2060866 2" x 10'



FUL 2060966 2" x 13'

FUL 2061066 2" x 16"

FUL 2061166 2" x 20"

Fulton

Transom Tie Downs - Retractable

2" x 43"

Sold in pairs



FUL 2060266 Stainless steel



FUL 2060366 Steel

1025

TRAILERING

Fulton Eclipse Economy

Swivel Tongue Jacks

Fast, easy swivel jack operation

Factory assembled mounting bracket provides

for quick and easy trailer installation

Provides up to 10" of travel

Zinc plated steel tubing

Grease nipple for gear lubrication

Fits trailer tongues up to 3" x 5"

FUL EJ1000-0101 1000 lb

FUL TJ1200-0101 1200 lb

Parts:

FUL 6811-S00 6" wheel kit

FUL 0933301-S00 Handle kit, XP10

FUL 0933305-S00 Handle kit, XP15

FUL 0933306-S00 Bevel gear kit

FUL 0933302-S00 Gear kit, XP10

FUL 0917514-00 XP15 replacement cap

Part #

A

B

Wheel

DiaMin Max

FUL XP10-0101 12.75" 22.75" 10.5" 6"

FUL XP15-0101 12.75" 22.75" 12.5" 8"

FUL XPD15L-0101 12.75" 24.75" 14.5" Dual 6"

Fulton Swivel Tongue Jacks

Factory assembled mounting bracket provides

for quick and easy trailer installation

Heavy duty zinc plated steel tubing

Fits trailer tongues up to 3" x 5"

FUL XP10-0101 1200 lb, bolt-thru, 6"

FUL XP15-0101 1500 lb, bolt-thru, 8"

Mount uses 3-D formed heavy gauge steel

stamping and a proprietary bushing material for

support

1500 pound capacity caster jack

Dual 6" rally wheel for easier castering

FUL XPD15L-0101 1500 lb, bolt-thru

Fulton F2 Fixed Jack w/Footplate

2,000 lb capacity

HD 7" articulating cast footplate

13" of swivel mount height adjustment

Sidewind handle with hold-up feature

10" screw travel

9/16" pull pin

Bolt on for 4" & 5" frames

FUL 1413-23-0134

Parts:

FUL 500134 Handle/crank kit

FUL 0933306S00 Bevel gear kit

FUL 500277 Weld-on plate 3-1/2 x 4-1/2

FUL 500135 Gearbox cover plate

Trailer Jacks

Fulton Fixed Jacks w/Footplate

Zinc plated, high strength, steel square tube, drop

foot trailer jacks

A 5/8" pin allows for quick height adjustment

4" x 6" foot plate

All necessary hardware is included for quick

installation with common hand tools

Fits on trailer tongues up to 3" x 5"

Side wind handle

Part # Min Max Clearance

Max

Load

FUL HD2500-0101 7.0" 35.50" 19.00" 2500#

FUL HD5000-0101 6.50" 35.00" 18.50" 5000#

Fulton F2 Performance Trailer Jacks

Precision extruded aluminum alloy inner and outer

tubes combined with twin alignment bushings for

Integrated pull pin with an ergonomic grip for simple,

quick and easy positioning.

10" screw travel

8" mount travel

9/16" pull pin diameter

1600 lb capacity

Parts:

FUL 500130 Twin replacement wheel kit (Includes 2 wheels & all necessary mounting hardware)

FUL 500131 Single replacement wheel kit (Includes 1 wheel & all necessary mounting hardware)

FUL 500138 Twin track wheel only

FUL 500134 Handle/crank kit

FUL 0933306S00 Bevel gear kit

FUL 500136 Replacement pull pin

FUL 500320 XP To F2 Adapter plate

Twin Tracks

7” diameter wheels roll independently

for easy turning. The 5-1/2" total wheel

base adds superior stability.

3" x 4" pivot

For 3" x 3" & 3" x 4" frames

FUL 1413-02-0134 Twin

4" x 5" pivot

For 3" x 5" frames

FUL 1413-13-0334 Twin

Single Track

8" diameter, 3" wide wheel provides a

sturdy working platform.

3" x 4" pivot

For 3" x 3" & 3" x 4" frames

FUL 1413-04-0134 Single

1026

TRAILERING

Trailer Winches

Fulton Trailer Winches

environments. Winch drums are drilled for use with winch straps. High carbon SAE 1050 steel gears to resist wear and last longer. Heavy

duty rib reinforced frames maintain proper gear alignment for longer life. Internally lubricated drum bushings and oil impregnated shaft

bushings provide permanent lubrication to keep the cranking easy. Each model is engineered with mechanical advantages to keep handle

effort low for smooth, easy operation.

Single Speed Trailer Winches

The easy to use "grabber" one-way ratchet, free wheels in off position on T600 and T900. Easy to use two-way ratchets bring the rope into

either the top of drum, or the bottom to hold bow of boat down on T1100 through T1801. Heavy duty frame strengthening cross shaft on

T1501 through T1801 maintains ratchet alignment under heavy loads.

Part # Capacity Gear Ratio Handle

Mech.

Adv. Ratchet Rope Strap Hub Handle

FUL T600 0101 600 lb 3.1:1 6" 34:1 Grabber 1-way 36' x 1/4" 15' x 2" 5/8" 5868

FUL T900 0101 900 lb 3.1:1 7" 39:1 Grabber 1-way 36' x 1/4" 15' x 2" 5/8" 6312

FUL T1100 0101 1,100 lb 4.1:1 7" 43:1 2-Way 30" x 5/16" 20' x 2" 3/4" 6312

FUL T1300 0101 1,300 lb 4.1:1 8" 49:1 2-Way 30' x 5/16" 20' x 2" 3/4" 6302

FUL T1500 0101 1,500 lb 4.1:1 8" 49:1 2-Way 20' x 5/16" 20' x 2" 3/4" 6302

FUL T1500Z 0101* 1,500 lb 4.1:1 8" 49:1 2-Way 20' x 5/16" 20' x 2" 3/4" 6302

FUL T1602 0101 1,600 lb 5.1:1 9" 56:1 2-Way 20' x 7/16" 20' x 2" 7/8" 6822

FUL T1801 0101 1,800 lb 5.1:1 10" 62:1 2-Way 20' x 7/16" 20' x 2" 7/8" 6817

*Comes complete with a 20' x 2" strap

Note: If you are pulling a load use a trailer winch and if you are lifting a load use a brake winch.

Two Speed Trailer Winches

One fast speed for quick pull in, the other slower speed pulls heavy loads easily. Fulton two speed winches

allow changing speed, without changing handles. Shift lock holds shaft in the desired gear ratio. Just lift the

lock and move shaft to change speed. Free-wheeling without a spinning handle makes for safer operation.

Neutral position for quick line payout without spinning the handle. 2-way ratchet pawl also has neutral

position. Zinc plated for superior corrosion resistance. Optional hand brake kit, No. 1619 available for all

models. Brake is purchased separately and can be installed after winch is mounted.

Part # Capacity Gear Ratio Handle Mech. Adv. Rope* Cable* Hub Handle

FUL T2005 0101 2,000 lb 4.1:1 & 9.8:1 10" 87:1 20' x 7/16" - 1" 6817

FUL T2605B 0101 2,600 lb 5.1:1 & 12.2:1 10" 108:1 24' x 7/16" - 1" 6817

FUL T3205 0101 3,200 lb 5.1:1 & 12.2:1 10" 79:1 - 185' x 7/32" 3/4" 6312

Fulton Winch Parts

FUL 0133306-S01 Ratchet Kit, T11/13/1500

FUL 1598S01 Ratchet Repair Kit, T1602/1605/1802/1805

FUL 0133301-S01** Ratchet Kit, XLT14Z

FUL 0133303-S01 Pinion shaft kit T1602/T1801

FUL 1514S01 Ratchet Kit, T600, 900, 1000, 1200

FUL 1562S00 Ratchet Kit, T2005, 2605,B, 3205

FUL 5621P-01 Wire Cable Keeper Kit (pkg)

FUL 6302P-01 8” Handle, Offset (pkg)

** Limited Quantity

FUL 6312P-01 7" Handle, Offset T900/1000A/1100

FUL 6817P-01 10” Handle, Offset (pkg)

FUL 9235P-01 10” Handle, Dogleg (pkg)

FUL 6822-01 Spare Handle, T1602

FUL 5868P01 6" Handle, Offset T600

FUL 0133303-S01 Pinion Shaft Kit, T1602/1801

FUL 0133302-S00 Pinion Shaft Kit, XLT14Z

FUL 1619-01 Optional Hand brake Kit

T600 T1100 T1500Z T1602

1027

TRAILERING

Trailer Winches / Winch Straps

Fulton Automatic Brake Winch

Single speed automatic brake winch

Whether raising or lowering a load, the double disc automatic

brake system provides the needed control for load security

Brake design also allows payout of line with no load on the

winch

Oil impregnated bushings, 15.8:1 gear ratio and 11" comfort grip

handle allow for low handle efforts under load

Heavy-duty reinforced frame maintains

gear alignment under load improving life

cycle performance

Zinc plating provides superior corrosion

resistance

2500 lb capacity

Includes cable keeper

11.13" x 7.13" with 11" handle

FUL K2550 0101 2500 lb

Fulton KX Work Deluxe Brake Winch

Self-activating automatic brake winches hold the load securely

when the crank handle is released

No minimum line load is required to activate the brake or pay

out cable from the winch

Drum hubs are 10 times the recommended

cable size to maximize cable life

Plated gear covers for improved gear train

protection and a dual ratchet system

Rated pull: 700-1,500 lbs

Max cable: 1/4"

Drum storage: 70'

Gear ratio: 5.1:1

11" handle

FUL KX1550 0101

Fulton F2 Trailer Winches

Completely enclosed design

Adjustable 6" - 9" handle

Single or dual gear drum 5.1:1 & 3.17:1

Handle mounts left or right side

20' strap with hook

Mounting hardware included

FUL FW2000-0101 2000 lb single speed

FUL FW3200-0101 3200 lb 2 speed

Epco Gator Tuff Winch Straps

Wide nylon webbing with heavy duty snap hook, zinc

plated to resist weathering. Winch strap comes with or

without sewn loop on the end.

2" x 20'

Max load 4000 lbs

EPC WSL20N Looped end

EPC WS20 Standard

Fulton F2 Trailer Winch

Completely enclosed design for a sleek, strong stylish look

Two piece corrosion resistant aluminum frame

One piece corrosion resistant aluminum handle

Dual gear drum operates smoothly

Switchable from left to right hand drive

Handle is easily adjustable to 6" or 7"

Soft ergonomic grip

Features 'Easy Install System' E.I.S.

Includes strap and mounting hardware

6.25" x 6.254" x 8.5"

7.85 lbs

FUL FW1600-0101 1600 lb

Tie Down Winch Cables

Galvanized steel 7 x 19

Zinc plated, forged latch, 7000 lb. hook

TIE 59385 3/16" x 25' 4200#

TIE 59390 3/16" x 50' 4200#

TIE 59395 7/32" x 25' 5600#

Parts:

TIE 50640 Replacement hook

Trailer winches haven’t changed much in the last 100 years.

The revolutionary Sky Winch is the opposite of traditional

winches and eliminates the hassles and dangers of trailering.

Simply leave a bow-line attached to your boat and

walk it to your trailer without wading in.

Then just place rope into SkyWinch, pull tight,

and start cranking. The Patented wheel grips

the rope and easily pulls most lighter-weight

boats under 18’. The crank arm will not spin

backwards until released with trigger for

controlled payout.

most standard trailers with included

mounting bracket & hardware

For best results, use with 1/2” solid-braid

rope with break-strength rating that exceeds boat weight

GRN SKYWINCH

Fulton Winch Straps

Black nylon web 2" x 20' winch strap

with hook

2,600 lb maximum working load

FUL WS20 0700 Each

FUL WS20 DP0200 12/pkg

Heavy duty 2" x 20' yellow winch strap

with sewn loop and hook

10,000 lbs breaking strength

FUL WS20HD0600 Each

T H E B E S T - I N - C L A S S T R A I L E R P R O D U C T S L E A D E R

1029

TRAILERING

Wesbar

Waterproof Side Marker/Clearance Lights

Mini LED light

Single wire. self grounding

1/4" stud mount

2-1/8" x 1-1/8" x 1-1/16"

WSB 401565 Amber

WSB 401566 Red

Trailer Lights

Wesbar Waterproof

Side Marker/Clearance Lights

Constructed of tough polycarbonate

Bulb is contained in a waterproof compartment

Comes with a pre-installed 15" lead wire

Used as a combination side marker and clearance light, when

Stud mount: 2-1/8" x 1-1/8" x 1-1/16"

Ear mount: 3-5/16" x 1-5/16" x 1"

WSB 203233 Amber stud

WSB 203234 Red stud

WSB 203285 Amber ear

WSB 203286 Red ear

Wesbar

Waterproof Side Marker/Clearance Lights

Waterproof LED clearance/side marker

light designed for easy installation.

Snap lock base mount

2-7/8" x 1-1/2" x 1"

WSB 401580 Amber

WSB 401581 Red

Parts:

WSB 221588 Grommet

Endurance Davit Winch

304 stainless frame, drum, fasteners, cable and hook

Designed for use in salt water enviroments

Rated: 2000 lb line pull, 600 lb

direct lift

Power in-out with freewheel

clutch

Hand held remote

1.5 HP, 153:1 gear ratio

5/32" x 35' stainless cable

Weight: 20 lbs

END EMD2000SS 12VDC

Endurance Utility Winch

General use utility winch

Rated: 2000 lb line pull

Power in-out with freewheel option

Hand held remote


3/16" x 50' galvanized aircraft cable

Complete with battery cable

12.24" x 4.53 x 4.3"

Weight: 16.5 lbs

END EU2000 12VDC

Endurance Utility Winch

General use utility winch

Rated: 3000 lb line pull

Power in-out with freewheel

clutch

Automatic load-holding brake

Hand held remote

Drum Dia: 1.34" x L: 3.2"


3/16" x 50' galvanized aircraft cable

Complete with battery cable

12.6" x 4.72" x 4.3"

Weight: 21.2 lbs

END EU3500 12VDC

Wesbar

58 Series Side Marker/Clearance Lights

Snaplock base mounts

4" x 2" x 1"

WSB 401585 Amber

WSB 401586 Red

Wesbar Waterproof

Side Marker/Clearance Lamps

Sonically sealed, break resistant polycarbonate lens and housing

insure a waterproof module. Meets requirements for both side

marker and clearance lamp when properly mounted.

Snap lock base mount

2-7/8" x 1-1/2" x 1"

WSB 203292 Amber w/Black base

WSB 203293 Red w/Black base

Parts:

WSB 203395 Amber light module

OPT MC90 AS Amber light module

WSB 203396 Red light module

OPT MC90 RS Red light module

WSB 221588 Grommet

Wesbar

Waterproof Side Marker/Clearance Lamp

Waterproof LED clearance/side marker

"tongue" lights. Excellent for boat trailer

tongue lighting. Snap-on lens with black

or white bases. Two wire construction with

either notched wires or molded single bullet and barrel.

Tested to FMVSS/CMVSS 108 requirements

2.62" x 1.83" x .83"

WSB 47-222012 Amber w/Black base

1030

TRAILERING

Trailer Lights

Wesbar

Light Bars

For boat trailers 80" or more in overall width

Three waterproof LED lamps on 6" centres

Stainless steel bar,.molded polycarbonate lights

Comes pre-wired with a 60" lead

L: 14-1/4" x H: 1-3/16" x D: 1-1/16"

WSB 401567 Packaged

WSB 47-99-004* Bulk

* Request

Wesbar License Plate Bracket

These cost effective plastic brackets are

easily mounted to Wesbar trailer lights.

1/4" mounting holes on 2" centres

WSB 003211 Black

WSB 003213 White

Wesbar Side Marker/Clearance Lights

Meets applicable DOT-108 lighting standards for clearance /

marker lamps when properly mounted (“PC” Rated).

“Quick Connect/Disconnect Wiring”

Bulbs and lenses are easily replaceable

Stud mount

L: 2-1/4" x H: 2-1/4" x D: 1-1/4"

WSB 203235 Amber

Parts:

WSB 003340 Replacement amber lens

SPE 57 Spare bulb

Wesbar

Features hidden mounting hardware with “Snap Fit” lens

Bulbs and lenses are easily replaceable

Features Wesbar’s “Quick Connect/

Disconnect Wiring”

L: 3-3/4" x H: 2-1/4" x D: 15/16"

WSB 203263 Amber

Parts:


SPE 194 Spare bulb

backs which bond to virtually any smooth,

clean surface.

L: 3-1/4" x H: 1-1/2"

WSB 003357 Amber

WSB 003358 Red

Wesbar

For boat trailers 80" or more in overall width

Three waterproof lamps on 6" centres



L: 14-1/2" x H: 1-1/8" x D: 1"

WSB 203315

Wesbar Replacement Lenses

Lenses for old style waterproof tail light series 403028/403078

Left hand unit includes plate light lense

Includes screws

WSB 281594 Right hand

WSB 281595 Left hand

281595

Wesbar

Quick Connect/Disconnect wiring method

Lenses are easily removed for quick replacement

Black housing

Stud mount

3-1/8" x 2-3/8"

WSB 203111 Amber

WSB 203113 Red

Parts:


ANC 520057 12V .24 amp bulbs (2/pkg)Wesbar

The best light bar available for

boat trailers 80" or more in overall width

Three waterproof lamps on 6" centres



L: 16-1/2" x H: 1-3/8" x D: 1-1/2"

WSB 203309

Parts:

WSB 203396 Red replacement module

1031

TRAILERING

Trailer Lights

Wesbar Waterproof

Sealed Recessed Tail Light

Red Stop/Tail/Turn light

Sonically sealed polycarbonate lens and

housing

Oval grommet & 3-way plug

Meets DOT standards for stop, turn & tail lamps

L: 6-1/2" x W: 2-1/4" x D: 2-3/8"

WSB 403080

Parts:

WSB 403085 Replacement sealed light module

WSB 401591 Grommet & 3 wire connectorWesbar

Waterproof 'Over 80' Wrap-Around Tail Lights

Waterproof surface mount tail lights

Wrap-around design eliminates the

connector and ring terminal ground

wire

Stainless steel mounting hardware included

Meet FMVSS/CMVSS 108 requirements

7.53" x 3.48" x 3.13"

WSB 271594 7-function, right/curbside

WSB 271595 8-function, left/roadside

Wesbar

Waterproof 3" x 8" Tail Lights

acrylic lens sonically sealed to base

(assures watertight seal). Complies

with all DOT requirements for over

80" trailers when mounted properly.

LED lights are rated at 100,000

hours. Light functions include stop,

turn and tail lights. Left side light includes license plate

illuminator. Plated steel hardware included.

8" x 2-7/8" x 2-3/4"



Wesbar

Waterproof 3" x 8" Tail Light Kit

Kit contains:

1 right 7-function & 1 left 8-function tail light

1 Plastic license plate bracket

4' wire harness

Hardware & install instructions.

Display packaged

WSB 407540

Wesbar

Waterproof 4" x 6" Tail Lights

lens sonically sealed to base (assures

watertight seal). Complies with all DOT

requirements for over 80" trailers when

mounted properly. LED lights are rated at

100,000 hours. Light functions include stop, turn and tail

lights. Left side light includes license plate illuminator.

Plated steel hardware included. Includes a 3 wire 90°

pigtail.

6" x 3-1/2" x 2-1/4"



Wesbar

Waterproof 4" x 6" Tail Light Kit

Kit contains:

1 right 7-function & 1 left 8-function

tail light


4' wire harness

Hardware & install instructions

Display packaged

WSB 407560

Wesbar

Waterproof 6" Oval Grommet Mount Tail Light

Red Stop/Tail/Turn light

Horizontal mount

Waterproof grommet mount

LED illumination

L: 6-1/2" x H: 2-5/16" x D: 7/8"

WSB 401584 Light

WSB 106873 Mounting bracket

WSB 416088 GrommetLight shown with grommet

Optronics

Waterproof Aero Pro Over 80” Combination

Tail Lights

Waterproof universal mount

stop/turn/tail lights for over 80"

applications

All-weather molded plastic housing and durable lens

protect against corrosion

STL36 is 7-function: stop, turn, tail, rear clearance, rear

STL37 includes license illuminator as well

L: 7-7/8" x W: 2-7/8"

OPT STL36RS Right hand - 7-function, right/curbside

OPT STL37RS Left hand - 8-function, left/roadside

1032

TRAILERING

Trailer Lights

Wesbar Deluxe Submersible 'Over 80' Tail Lights

Durable acrylic lens sonically sealed to base (assures watertight

seal). Submersible using the reliable “Bell Jar” principle.

mounting bolt pattern. Complies

with all DOT requirements for over

80" trailers when mounted properly.

Easily replaceable bulbs. Plated steel

hardware included.

W: 6" x H: 3-1/2" x D: 2-1/4"

WSB 403025 8-function left/roadside

WSB 403075 7-function right/curbside

Wesbar Deluxe Submersible

'Over 80' Tail Light Kit

Kit contains:

1 right & left-hand tail light

2 Standard amber side lights


4' 4-way trunk connector with ground

Quick connect/disconnects & installation instructions

Display packaged

WSB 407515

Wesbar 'Under 80'

Tail Light Kit

Kit contains:



4' 4-way trunk connector with

ground

Quick connect/disconnects &

installation instructions

Display packaged

WSB 407500

Wesbar 'Under 80' Tail Lights

Universal 2" on center stud mounting.

Screw-on main and side marker lens allow

for easy bulb replacement. This tail light is

designed for a variety of under 80"

light-duty trailers. Wiring uses the quick

connect and disconnect feature.

4-3/4" x 4-1/2" x 2-9/16"



Parts:

WSB 2423286 Replacement red tail light lens

Wesbar Submersible 'Under 80' Tail Lights

Submersible tail lights are designed to protect the bulbs

and contacts when the trailer is under water

during launching and loading.

Gasketed lenses are replaceable

12" pre-installed wire leads

Two 1/4" mounting studs on 2" centres

Black housing, display packaged

5-1/4" x 4-7/16" x 3-3/4"



Parts:

WSB 2423286 Replacement red tail light lens

Wesbar Submersible

'Under 80' Tail Light Kit

Kit contains:



4' 4-way trunk connector with ground

Quick connect/disconnects &

installation instructions

Display packaged

WSB 2527511

Wesbar Waterproof

These tail lights feature a sealed

lamp capsule that protects the

bulb and electrical contacts from

damage. Life expectancy of the

bulbs in the replaceable capsule is 2,900 hours. These units

serve seven basic functions - tail light, stop light, turn signal,

clearance light. The left hand light has a built-in license plate

and come with 15" pigtails. Black housing. Display packaged.

L: 8" x H: 2-7/8" x D: 2-3/4"


WSB 403026 8-function left/roadside

Parts:

WSB 403348 Replacement capsule

WSB 403336 Replacement lens set

Wesbar Waterproof

Kit contains:

2 waterproof over 80” tail lamps

2 sealed amber side marker lamps

License plate bracket

25’ wishbone wiring harness

4’ trunk connector

Hardware & install instructions

WSB 007509

FYIMulti-Function Lights

1033

TRAILERING

Trailer Wiring

Wesbar harnesses conform to all applicable SAE, NMMA and TMA

standards to provide years of dependable service.

WSB 007257

WSB 707250

WSB 707282

WSB 767940

WSB 787195

WSB 787196

787195767940

707282

707250

Wesbar Trailer Light Adapters

007257

Sierra

T-Connect Trailer Connector

T-trailer connectors come with a standard 4 pole

90% of all trailers today. If you connect to a

7-way RV plug use one of these adapters.

SIE TC44984

Fulton

Plug to Plug Adapter

Checks for electrical connectivity

Displays connection with blue LED's

Attached dust cover

FUL 78118

Fulton Plug Adapter

For vehicles with trailer lamp-out sensors, such

as: Audi, Mercedes-Benz and Volkswagen

vehicles with a factory tow package

FUL 20141

Sierra Trailer Connector Converter

7 way to 4 connector adapter

with a tow vehicle equipped with a 7-pole RV

style blade trailer connector. No cutting, splicing,

or tracing wires. Plug in connection makes

connecting the two different connectors a snap.

Adapts many late model factory "prewired" vehicles (including

Jeep, Ford Truck and Winnebagos) to the more commonly used

SIE TC42914

Sierra Trailer Connector Adapter

6 way to 4 connector adapter

with a tow vehicle equipped with a 6-pole

round trailer connector. No cutting splicing

or tracing wires. Plug in connection makes

connecting the two different connectors a snap.

SIE TC42904

SIE TC51300


SIE TC50000


Sea-Dog Trailer Connector Adapter

SED 753874-1

1034

TRAILERING

Trailer Wiring

Sierra Connectors

12" long wire leads on male and female sides

Molded waterproof bodies

Colour coded wires

Polarized

Precision terminals

Bubble packed on cards

SIE TC43634 2 pole

SIE TC43654 4 pole

Sierra 4-Pole

Trunk Trailer Connection Kit

Complete kits containing connector

with hardware, mounting bracket,

wire and splice connectors.

SIE TC43764**

** Limited Quantity

Sierra 'Y' Harness

Flat 4 pole 'Y' connector

Consists of: 4' vehicle side connector, 25'

trailer side connector, splice connectors, and

wire clips

Trailer side wires are split to allow routing of

wires down both sides for easy hook up

Safe colour coded wires

SIE TC43744

Sierra

4-Way Wiring Harness Kit

connector

Consists of: 4' vehicle side connector, 25'

trailer side connector, splice connectors, and wire clips

Trailer side wires are split to allow routing of wires down

both sides for easy hook up

Safe colour coded wires

SIE TC43754

Sierra

Electronic Trailer Light Converter

Allows cars with separate stop and signal

lamps (most imports and many late

model domestics) to tow trailers with the

"normal" combined stop/signal lamps

Eliminates the need for additional lamps

on the trailer or time consuming rewiring of trailer

Comes with bare wires for splicing into existing harness

SIE TC43504

Sierra

Female 4-Pole Connector

48" colour coded wires

Bubble packed on cards

SIE TC44094

Sierra 4-Pole Connector

coded wires. Bubble packed on cards.

SIE TC44054

Fulton Flat Trailer Connector

Coiled 14 gauge cable available with either

Cable extended length to 11 feet

FUL 54000-026 4 way

FUL 54000-027 5 way

Pico Trailer Hook-Ups

Pre-wired molded trailer connectors,

male & female with 12" loop wire

Cut and splice into wiring assembly

All sets are polarized & colour coded

PIC 1871BP 2 Pin 16 ga. connector




1873BP1871-73BP

1872

Sierra Boat Plug Tester

Plugs into tow vehicle and LEDs illuminate to show

if connections are correct and working.

Tests tail, stop/turn and ground.

SIE TC42884

Wesbar Plug Testers

WSB 767941

WSB 51-767811 6 way-round tester w/LED lights

WSB 767943 7-way blade tester/emulator

1035

TRAILERING

Trailer Wiring

Wesbar Wiring Accessories

Designed for the Do-It-Yourselfer market,

these trailer wiring kits are easy to install.

Comes with complete instructions.

707254

Wesbar

4-Way Extension Harness

2' double ended 4-way.

(Flat wire car & trailer ends).

WSB 707254

707270

Wesbar

4-Way Trailer Harness

18" ground.

WSB 707270

707103

Wesbar

4-Way Trailer Harness

harness kit w/hardware, 3' ground w/4'

car end, 18" ground.

WSB 707103

707272

Wesbar

4-Way Car End Harness

WSB 707272

707285

Wesbar

4-Way Trailer End Harness

18" ground.

WSB 707285

707275

Wesbar


WSB 707275

707286

Wesbar


18" ground.

WSB 707286

702305

Wesbar


4' auxiliary.

WSB 702305

707273

Wesbar


6' auxiliary.

WSB 707273

702405

Wesbar


18" ground, 18" auxiliary.

WSB 702405

707255

Wesbar

5-Way Extension Harness

Double ended 5-way 2', cord.

WSB 707255

707283

Wesbar


harness, 4' ground, 4' auxiliary.

WSB 707283

Wunside Harness

Wishbone Harness

Trailer End

Car End

1036

TRAILERING

Trailer Rollers

Yates Boat Trailer Bow Rollers

Non-marking black rubber

Part # O.D. Width Shaft Size

YRP 3143-4 3" 3-1/8" 1/2"

YRP 4174-4 3-1/2" 3-3/4" 1/2"

Yates Boat Trailer Ribbed Roller


OD: 5", W: 3"

Insert: nylon, Shaft: 3/4"

YRP 530R-6PS

Yates Boat Trailer Spool Rollers


OD Flange: 3", OD Centre: 2"

Part # Length Insert For Shaft Size

YRP 4163-4P 4" Plastic 1/2"

YRP 5203-4P 5-1/4" Plastic 1/2"

YRP 5203-5P 5-1/4" Plastic 5/8"

YRP 8302-4P 7-5/8" Plastic 1/2"

Yates Boat Trailer Rocker Roller


OD: 4-1/4", W: 4-1/4"

Insert: Zinc chromated washer

Shaft size: 3/4"

YRP 440R

Yates Side Guide Roller

Length: 12"

O.D. Flange: 2-1/2"

For shaft size: 5/8"

YRP 12243-5

Yates Boat Trailer Y Stops


Part # Base Span For Shaft Size

YRP 4Y22-3 2" x 2" 4" 3/8"

YRP 6Y33-4 3" x 3" 6" 1/2"

YRP 7Y44-4 4" x 4" 7" 1/2"

Yates Boat Trailer Keel Rollers



Part # Length

O.D.

Flange

O.D.

Centre

For Shaft

Insert

YRP 5213-5 4-7/8" 3" 1-1/2" Steel Sleeve

YRP 5213-5P 4-7/8" 3" 1-1/2" Plastic Sleeve

YRP 8000 7-3/4" 3-3/8" 2-3/8" Nylon End Cap

YRP 12000 11-3/4" 3-3/8" 2-3/8" Nylon End Cap

YRP 155EC

Replacement bushings for the 8000 and 12000 series rollers.

Fulton Bunk Carpeting

Protection from scratches & abrasions using this

black weather resistant marine carpeting.

FUL CR8008 8" x 12'

FUL CR8012 12" x 12'

Yates End Cap


O.D.: 3-1/2", W: 1-15/16"


YRP 134-5

Tie Down Engineering Wobble Roller

Black polyvinyl construction

Length: 4-1/8" x Dia: 4"

Shaft size: 3/4"

TIE 86428

1037

TRAILERING

Trailer Rollers & Parts

Tie Down Engineering Keel Rollers

These polyvinyl chloride with UV inhibitors rollers have non

marking assurance built in and will not put any marks on your

boat. These rollers will outlast rubber rollers, are shock resistant

and extremely cut resistant.

Amber # Black # Description Length x Dia. Shaft

TIE 86289 TIE 86402 3” - Roller Bow 2-7/8" x 3" 1/2" 1

TIE 86290 - 3” - End Bell 1-1/4" x 4-1/2" 1/2" 2

TIE 86143 - 3” - Roller Assembly w/End Bells 5-1/2" x 4-1/2" 1/2" 3

TIE 86287 TIE 86400 4” - Roller, Bow 3-3/4" x 3-5/8" 1/2" 4

TIE 86288 - 4” - End Bell 1-5/8" x 5-1/8" 1/2" 2

TIE 86142 - 4” - Roller Assembly w/End Bells 7-3/8" x 5-1/8" 1/2" 3

TIE 86284 TIE 86406 4” - Keel Roller - Spool Type 3-1/2" x 2-3/4" 5/8" 5

TIE 86158 TIE 86407 5” - Keel Roller (center guided) 4-1/2" x 3-1/2" 5/8" 6

TIE 86283 TIE 86408 5” - Keel Roller - Spool type 4-3/4" x 3" 5/8" 7

TIE 86159 TIE 86409 8” - Keel Roller 7-1/2" x 3-1/2" 5/8" 8

TIE 86169 TIE 86410 10” - Keel Roller 9-1/2" x 3-1/2" 5/8" 8

TIE 86199 - 12” - Keel Roller 11-1/2" x 3-1/2" 5/8" 8

TIE 86198 - 3.5" - End Caps 1-1/4" x 3-1/2" N/A 9

Amber # Black # Description H x W x D Shaft

TIE 86291 - 15" x 3.5" - Keel Pad 1-1/4" x 15" x 3-9/16" N/A 10

- TIE 86420 2" - “V” Bow Stop 3" x 3-3/4" x 2" 1/2" 11

TIE 86285 TIE 86413 3" - “V” Bow Stop 3-1/8" x 6-1/8" x 2-3/4" 1/2" 12

- TIE 86421 4" - “V” Bow Stop 3-3/8" x 7" x 4" 1/2" 13

#2#3

#9

#10

#11

#13

#1

#4#5

#6 #7

#8

#12

Tie Down Engineering

Wobble Roller Kit

K-kits include (4) 5” ribbed amber

rollers, 7/8” & 1.15” bushings, hog ring

& washers.

TIE 86144 Ribbed, Amber

Tie Down Engineering Roller Shaft & Pal Nuts

TIE 86025 Roller shaft 1/2" x 5-1/4" with 2 pal nuts







TIE 86305 1/2" pal nuts 4 per card

TIE 86310 5/8" pal nuts 4 per card

TIE 86300 1/2" pal nuts 50 per box

TIE 86301 5/8" pal nuts 50 per box

Tie Down Engineering Hex Head Bolts

Use for mounting brackets, couplers and

winch stands

Grade 5, zinc plated steel

Kit contains four bolts, washers and nylock

nuts

TIE 86253 3/8" x 3"

TIE 86254 3/8" x 4"

TIE 86255 3/8" x 1"

TIE 86256 7/16" x 1"

TIE 86257 1/2" x 3-1/2"

Tie Down Engineering Lug Nuts & Bolts

TIE 81172 1/2" lug nuts, 5/pkg

TIE 81170 1/2" lug bolts, 5/pkg

1038

TRAILERING

Fulton Bearing Life

Wheel Bearing Protectors

Provide permanent protection against

damage from water and dirt entering the

wheel bearings.

Maintains correct internal pressure

Chromed steel construction

Covers are vinyl

Sold in pairs

FUL BPC198-0604 1.98" (covers included)

FUL BPC178-0604 1.78" (covers included)

FUL BP232S-0604 2.328" (w/o covers)

FUL BP244S-0604 2.441" (w/o covers)

FUL BB178-10112 1.78" (covers only)

FUL BB198-00112 1.98" (covers only)

FUL BB244-10112 2.328" / 2.441" (covers only)


Bolster Brackets

Designed to support bolster or bunk

boards

Slotted for vertical adjustment and

feature non-slip dimples to avoid

movement and increase load capacity

TIE 81210 8" with 2-3/4" slot w/swivel bracket 2/pkg



TIE 81250 12" with 4-3/4" slot 2/pkg

TIE 81195 8" with 2-3/4" slot 2/pkg

TIE 81200 10" with 3-3/4" slot 2/pkg

Tie Down Engineering Trailer Parts

Precision tapered roller bearings (bulk)

TIE 81304 1-1/16" bearings - 2/pkg

TIE 81305 1-1/16" cups - 2/pkg

Precision tapered roller bearing kits. Each kit includes: 2 cones,

2 cups, seal, cotter pin and dust cap where noted.

TIE 81110 1" bearings

TIE 81111 1" bearings w/dust cap

TIE 81115 1-1/16" bearings

TIE 81116 1-1/16" bearings w/dust cap

TIE 81125 1-1/4" bearings

TIE 81126 1-1/4" bearings w/dust cap

TIE 81140 1-3/8" x 1-1/16" tapered bearings

TIE 81141 1-3/8" x 1-1/16" tapered bearings w/dust cap

TIE 81167 1.98" dust caps only, 2/pkg


Bunk, Swivel & Keel Brackets

Bunk Bracket

11gauge hot dip galvanized steel

Slotted for vertical adjustment to standard

or deep V hulls

TIE 81225 9-1/2" long with 6" slot

TIE 81230 12-5/8" long with 9-1/8" slot

Split Brackets

Accommodate any size roller length

Slot allows vertical adjustment for

stabilizing boat on trailer

Slots accept 7/16" or 1/2" bolts. Use 1/2" or

5/8" roller shafts

Sold in pairs

TIE 81235

Bolster Brackets

Use with adjustable for proper angle of

bunk or bolster boards

Swivel bracket c/w 1/2" x 1" bolts with

nylock nuts per pair

TIE 86160

Offset Brackets

Adjustable mount on tongue for keel support

Assembled version comes complete with 4"

rubber roller for 2" wide tongue

Max. depth: 6"

TIE 86121

Tie Down Engineering U-Bolt Kits

Use for mounting brackets to trailer frames

Zink Plated Steel

Sold in pairs

TIE 86205 1/2" x 3-1/8" x 3" Square

TIE 86206 1/2" x 3-1/8" x 4" Square

Galvanized Steel

Sold by the each

TIE 86220 7/16" x 1-9/16" x 3-9/16" Square

TIE 86221 1/2" x 1-9/16" x 4-1/16" Square

TIE 86222 1/2" x 3-1/16" x 3-13/16" Square

TIE 86223 1/2" x 2-1/16" x 4-13/16" Square

TIE 86224 3/8" x 1-3/4" x 4-13/16" Round

TIE 86225 1/2" x 2-3/8" x 5-3/8" Round

Trailer Parts

1039

TRAILERING

Tie Down Engineering "G5" Stainless Steel Trailer Disc Brakes

Stainless steel rotor with venting holes & all aluminum caliper

Large single, bi-metal piston design

Ceramic pads with stainless steel backing plates

Swivel brake line connector

Stainless steel caliper pins with oil impregnated bronze bushings

Vented caliper housing

Square o-ring with slant edge

Lifetime limited warranty

Requires 2 per axle

Part # Description Rotor Diameter Hub Capacity Hub Bearing size Hub Bolt Pattern

TIE 820913500 lb Axle, for 13, 14 & 15" wheels

Replaces 10" drum brakes9.6" x .3125" 1750 lbs 1-1/16" & 1-3/8" 5 @ 5.5"

TIE 820926000 lb Axle, for 14 & 15" wheels

Replaces 12" drum brakes11.75" x .3125" 3000 lbs 1-1/4" & 1-3/4" 6 @ 5.5"

8209282091


Eliminator Vented Disc Brakes

Stainless Steel caliper slide pins are easily accessible with 7/16” hex heads for quick removal GalvX coated brake pad backing plates further reduce areas susceptible to corrosion faster than traditional cast iron calipers Compact design allows short axle overhangs and provides direct brake line routing back to the axle Oil impregnated bronze bushings last longer and slide smoother Oversize rubber boot is 50% thicker by design and provides a more positive piston withdrawal

TIE 82113 10” "Integral" style brake kit

81103 82084

Tie Down Engineering Trailer Parts

Super Lube Hub Kits

Bearing and hub cavity 100% pre-greased. Greased seal and bearings are pre-assembled.

Kit includes bearings, seal, super lube dust cap, cotter key and lug nuts or lug bolts.

Part # Bearing Size Description

TIE 81015 2 ea 1" w/lug nuts 4 Stud Super Lube hub kit (1250#)

TIE 81040 2 ea 1-1/16" w/lug nuts 5 Stud Super Lube hub kit (1350#)

TIE 81045 1 ea 1-1/16" & 1-3/8" w/lug nuts 5 Stud Super Lube UHI hub kit (1750#)

Parts:

TIE 81168 Replacement dust caps, 2/pkg

TIE 81174 Replacement rubber cap grommet, 2/pkg

Hub Kits

Kit includes bearings, seal, dust cap, cotter key and lug nuts or lug bolts. Factory pre-greased.

Part # Bearing Description

TIE 81050 2 ea 1" w/bolts 4 hole/bolt hub kit (1250#)

TIE 81060 2 ea 1" w/lug nuts 4 Stud hub kit (1250#)

TIE 81065 2 ea 1-1/16" w/lug nuts 4 Stud hub kit (1350#)

TIE 81080 2 ea 1" w/lug nuts 5 Stud hub kit (1250#)

TIE 81085 2 ea 1-1/16” w/lug nuts 5 Stud hub kit ( 1350#)

TIE 81090 1 ea 1-1/16"&1-3/8" w/lug nuts 5 Stud UHI hub kit

Parts:

TIE 81167 Replacement dust caps 2/pkg

Parts:

TIE 46304A Caliper assembly w/pads

TIE 81100 S/S brake pads (4/pkg)

TIE 82084 Eliminator vented rotor pads (4/pkg)

Accessories:

TIE 81103 Reverse backing solenoid kit

Trailer Parts

1040

TRAILERING

Tie Down Engineering 10" Brake Kit

Kit comes with everything needed to replace trailer drum or

disc brakes for faster stopping power

Disc brake actuator features cast ball clamp, oversized master

Includes pair of GalvX coated vented rotor disc brakes, disc

brake actuator, brake line kit and free backing solenoid

TIE 82405


Trailer Drum Brakes

A highly corrosion resistant drum brake.

The GalvX system is composed of

inorganic polymers which bond metallic

Aluminum wheel cylinder Stainless steel springs Brake pads are bonded and riveted with bronze rivets to backing plate Superior saltwater performance over standard drum brakes

TIE 81097 10" Galv-x drum brake assembly L & R (pair)

TIE 81004 5-Bolt, 10" Drum hub only, with cups & studs (each)

81004

81097

Tie Down Engineering Brake Flush Kit

Easy to install and easy to use

Adapts to all trailers

TIE 81107

Tie Down Engineering Model 66 Brake Actuators

An all aluminum master cylinder incorporates the shock absorber

into the cylinder assembly providing the operator with a warning

volumes to run both tandem and tri-

Other features include:

For trailers to 6,600 lbs capacity

Cast ball clamp

Extended latch lever

Exterior emergency safety cable lock and release

Vinyl coated coiled emergency stop cable

Safety lock pin with back up position

*Available for disc or drum brake applications.* For 2" trailer ball only

TIE 82400 Disc brake unit

TIE 82401 Drum brake unit

Trailer Parts

Tie Down Engineering Flexible Brake Line Kit

lines are ideal for disc brake installation

requirements. Connects from brake caliper

to female end of brake line or can be connected to existing steel

lines. Flexible line connection required on G4 disc brakes.

TIE 81099


Flexible Hydraulic Brake Line Kits

Designed to be used on trailers using

either surge brake actuators or power

brake actuators (vacuum/hydraulic, air/

hydraulic, electric/hydraulic). Brake

approved for use on all trailer brakes

Add disc or drum brakes to your trailer. All hardware included, you

supply the actuator and brakes. The "Add On" Axle Kit must be

used with the Single Axle Kit. The Tandem Axle Kit combines both

Single Axle and "Add On" Kits into one package

This brake line kit is designed to be used to replace existing brake

lines or installed on a trailer that has not had brakes beforeKit includes:

2-Union "T" connectors, 2 "T" clamps, 8-self taping screws & 4 cable clamps

TIE 80326

"Add On" Axle Kit to be used with the Single Axle Kit.

2-Union "T" connectors, 2 "T" clamps, 8-self taping screws & 2 cable clamps

TIE 80327

All in one kit includes hardware for tandem axle trailers.

TIE 80328


Hitch Cables & Safety Chains

Replace your noisy chains with self-coiling hitch cables

Available plain or vinyl coated

Both use durable galvanized aircraft cable construction

Hitch cables exceed SAE J684 standards for trailer coupling and

automotive type hitches

TIE 59533 Black vinyl 36" rated Class 1 2000# trailer

TIE 59535 Galvanized 36" rated Class 2 3500# trailer



TIE 81202 3/16" x 31" zinc plated rated Class 2 trailer (2pkg)

TIE 81203 1/4" x 31" zinc plated rated Class 3 trailer (2pkg)

TIE 81255 Rubber “S” Hook safety chain keepers 2/pkg

81255

59533 81202

1041

TRAILERING

Trailer Parts

Fulton Economy Spare Tire Carrier

Lock a spare tire to the trailer tongue

to keep it neatly out of the way and to

prevent theft

Heavy duty 1/2" diameter zinc plated

construction

Fits 8", 9", 12", 13", 14" and 15" wheels

with 4 or 5 lug rims

FUL ETC0101

Heavy duty bolt-on

12" - 14" spares with 4 & 5 lugs

FUL 581902** Heavy duty

** Limited Quantity

Fulton Heavy Duty Spare Tire Carrier

Fulton HD Spare Tire Carrier

Fits trailer wheels up to 16-1/2"

Provides 4-3/4" lift and over 7” of offset

Fits trailer tongue up to 3” wide by 5”

high

protection

Easy bolt-on installation, no cutting or

drilling required

All mounting hardware and instructions included

FUL HDSTC0101 4, 5 & 6 bolt lug

Fulton Spare Tire Carrier

Welded and reinforced steel plate

construction

Hot dip galvanized

Provides 4-5/8" lift and over 5” of offset

Fits all trailer tongues up to 3" wide by 4" high

Complete with zinc plated mounting hardware

FUL STC 100 0101

Tie Down Engineering Side Mount Tire Carrier

5 lug wheels

Offset height raises tire and provides

additional ground clearance

Security holes provide for optional

cable and lock (not included)

Hot dip galvanized for lasting

protection

Fits all trailer tongues up to 3” wide by

4” high

Extra heavy duty welded steel construction

TIE 86098

Fulton Fold-Away Hinge Kits

Reduces trailer tongue length by up to 36"

Install on existing trailer tongue

Corrosion resistant zinc plated steel

All mounting hardware included

FUL HDPB330101 3" x 3" tongue

Max gross trailer weight: 3,500 lbs





Multi-angle extendable step system for boat trailers.

Preset angles 22, 45, 67 and 90

Extend, retract from 16" to 22"

Quick lock secure pin

High tensile extruded 6061

aluminum construction

Anti-skid step surface

Step platform: 14" with 3" tube

Stainless steel hardware

300 lb capacity

MKG FLEXSTEP Each

Megaware Adjustable Trailer Step

Fulton Boat Roller Guides

Non-marring cushioned rollers prevent

protection

Stainless steel pins hold rollers in

position to maintain hull contact under all loading conditions

Fits all trailer frames up to 3" wide and 5" high

FUL BGR200101 Height 20", pair

1042

TRAILERING


Heavy Duty Guides

48” high PVC pipe guides your boat on

safely and gives you visual aid when

backing an empty trailer

Non-marking PVC pipe is braced inside

with metal tubing going 20” up the tube

All hardware is included and is hot dip

galvanized for corrosion protection

TIE 86103 Pair

Fulton Boat Guides

Non-marring marine grade PVC

frames up to 3" wide and 5" high

FUL GB440-101 Height 44", pair

FUL GB150-0100 Height 50", pair


Bunk Board Guide Ons

Carpeted bunk boards

Bunk placement if mounted above

frame is 19"

Outside of the frame there is 5"-11"

of side movement

U-bolts and nuts are zinc plated

Mounting hardware is galvanized for

corrosion protection

Fits frames 2" & 3" wide up to 4" high

Sold in pairs with all hardware

included

TIE 86123 2' kit

TIE 86124 5' kit

86123

86124


Pontoon Trailer Guide Ons

Adjustable sight of 24" - 36"

When the trailer is submerged, the

PVC guide rises upward adding an

additional 12" of sight

Bright orange end caps

Designed to be mounted between the

pontoons

Made of 1-1/2" square, 16-gauge steel

galvanized tubing and covered by

2" x 20" PVC pipe

Guide posts extend fully into the

PVC tube for additional strength

Fits cross members 2" x 2", 2" x 3" and 2" x 4"

All mounting hardware included

TIE 86468

Fulton Towing Starter Kit

Kit includes:

Standard ball mount - 2" drop, 3/4" rise, 8-1/2"

long

Chrome hitch 2" ball, 6,000 lb

Pin and clip included

Ball and ball mount are attached

FUL 83563-002

Fulton Fas-Lok Straight Tongue Couplers

Proven Fulton Fas-Lock locking levers

hook up quickly and easily and feature a

heavy duty safety latch and padlock hole.

Designed for 1-7/8" or 2" ball sizes

Class I or Class II trailers with

2" or 3" tongue widths

Part #

Fits

Ball Size

SAE

Class

Trailer

GVW.lbs

Tongue

Mount

Width

FUL 11200-0101 1-7/8" I 2,000 2"

FUL 11300-0101 1-7/8" I 2,000 3"

FUL 22200-0101 2" Il 3,500 2"

FUL 22300-0101 2" Il 3,500 3"

Fulton Ball Mounts

Use with most 2" x 2" square receivers

For 1" shanks

Pins and clips sold separately

The mounts meet or exceed Vehicle

Equipment Safety Commission and V-5

standards

Part # Length Drop Rise Rated Finish

FUL 21342 8-1/2" 2" 3/4" 7,500 lbs Black

FUL 21344 9" 4" 2-3/4" 6,000 lbs Black

FUL 21346 9-1/2" 6" 4-3/4 6,000 lbs Black

Parts:

FUL 63240 5/8" pin set f/2" ball mounts

Fulton Ball Mount

1-piece solid forged construction

Use with most 2" x 2" square receivers

For 1-1/4" shanks

Rated: 16,000 lbs

Pins and clips sold separately

The mounts meet or exceed Vehicle Equipment Safety

Commission and V-5 standards

Part # Length Drop Rise Rated

FUL 21330 8-1/2" 2" 1" 16,000 lbs

Trailer Parts

1043

TRAILERING

Trailer Parts & Locks

Fulton Chromed Hitch Balls

Solid steel hitch balls are engineered to meet all

safety requirements of VESC regulations V-5.

When installing hitch balls: torque all 3/4" shank

balls to 160 ft. lbs., all 1" to 250 ft. lbs., and

1-1/4" shank balls to 450 ft. lbs. Always use the

properly rated hitch ball for your towing system.

Part # Ball Max. Trailer

Shank

L x Dia

FUL 63880 1-7/8" 2,000 lbs 1-1/2" x 3/4"

FUL 63884 1-7/8" 2,000 lbs 2-1/8" x 1"

FUL 63882 1-7/8" 2,000 lbs 2-3/8" x 3/4"

FUL 63887 2" 3,500 lbs 1-1/2" x 3/4"

FUL 63889 2" 3,500 lbs 2-3/8" x 3/4"

FUL 63909 2" 7,500 lbs 2-1/8" x 1"

FUL 63908 2-5/16" 7,500 lbs 2-1/8" x 1"

FUL 63896 2-5/16" 12,000 lbs 2-3/4" x 1-1/4"

Sea-Dog Two Piece Coupler Lock

Zinc, brass plated construction

L: 1-11/16" x W: 1-13/16"

Lock opening: 3/4"

SED 751030-1

Sea-Dog Coupler Lock w/Stainless Pin

Brass construction

L: 2" x W: 1-1/2" x D:5/8"

Lock opening: 9/16"

SED 751020-1

Trimax Premium Universal Coupler Lock

Large 6 tooth 3/8” locking lug system

Provides 360° of hardened steel protection

Ballistic nylon housing absorbs blows and

provides weather protection

Key hole cover slides closed to

protect from dirt

TMX UMAX100

Trimax Universal Coupler Lock

Provides 360° of hardened steel protection

Reinforced armoured shoulder guard resists

hammer strikes and saw cuts

Key hole cover protects from grime & dirt

TMX UMAX50

Fulton Universal Coupler Lock

FUL 63226

Trimax Coupler Lock

Secures couplers with up to a 7/8” span

Easy 1/4 turn locking

Hardened steel 1/4” pin

Internal O-ring and weather proof cap to seal

out dirt

Protective rubber cover on body prevents noisy

rattle & abrasion

TMX TMC10

Sea-Dog Coupler Locking Pin

Made from electro-galvanized steel

L: 3" x W: 1-13/16"

Pin diameter: 1/4"

SED 751010-1

Trimax Coupler Locks

Fits couplers 7/8", 2-1/2" to 3-1/2"

Features 1/4 turn technology that cannot be false locked

O ring keeps water, grime and dirt out of locking mechanism

Type A key which is a spring loaded, 7 pin, high security key

thqat will not bend or break

Resists attempted drill outs

TMX TC123 Chrome plated machine hardened steel

TMX SXTC123 Stainless steel

Trimax Chromed Hitch Ball

Double tow ball. 2" & 2-5/16" with 1" shank

Torque to: 250 ft. lbs

Weight rating: 10,000 lbs

TMX TDBC22516

Trimax RAZOR Adjustable Tow Hitches

Black powder coated forged steel

Stainless steel or powder coated face

10,000 Lbs tow rating, ball limited

1500 Lbs max tounge weight

Contains free keyed alike 5/8 receiver lock, T3

Adjusts in 1" increments

Hitch balls not included

Stainless Face

TMX TRZ6SFP 6" drop or rise

TMX TRZ8SFP 8" drop or rise

Powder Coated Face

TMX TRZ6PB 6" drop or rise

1044

TRAILERING

Trimax Receiver/Coupler Lock Set

Keyed alike set

Combination of a T-3 5/8" receiver lock &

TC1 7/8" span coupler lock

No internal springs to seize or break

Polished steel with stainless steel internal

components

TMX TM31

Trimax Receiver Lock

Easy 1/4 turn operation

Made of chrome plated machine hardened steel

Large 1/4” dual lock lugs prevent false locking

Integral O-ring and water tight cap seals out dirt and corrosion

TMX TR200 5/8" pin for class III, IV & V receivers

Fulton Coupler Lock Combo Set

Combo lock set

Bent shank brass coupler

For 1-1/4" & 2" square receivers

FUL 63249

Trimax Receiver/Coupler Lock Set

Keyed alike set with a SXT3 5/8"

receiver lock & span coupler

100% stainless steel

Features 1/4 turn technology that

cannot be false locked

O ring keeps water, grime and dirt out

of locking mechanism

Protective rubber cap protects keyhole



TMX SXTM31 7/8" span

Trimax Wheel Chock Locks

Quick and easy installation

Locks and chocks wheel for roll

prevention

Rubber coated arms protect wheel

Heavy gauge powder coated

construction

TMX TCL65 Closed: 6", Open: 10.5", Reach: 7.25"

TMX TCL75 Closed: 7", Open: 11.25", Reach: 10.5"

Camco Wheel Chock

Chocks keep your trailer in place so

Solidly constructed of durable hard

plastic with UV inhibitors

Includes rope for ease of use

D: 8.25" x H: 4.56" x W: 4.88"

CAM 44472

Camco Super Wheel Chock

Chocks keep your trailer in place so

Solidly constructed of durable hard

plastic with UV inhibitors

D: 10" x H: 6.5" x W: 8.5"

CAM 44492

Camco Wheel Dock

Prevent your trailer tongue wheel

from rolling on the pavement or

sinking into soft ground

Heavy duty, durable dock is easy

to store and transport

D: 1.75" x Dia: 12"

CAM 44632

Trimax Ultra-Max Wheel Lock

Wheel lock with disc to cover lugs nuts and

prevent tire removal and theft

and wheels

TMX TWL100

Trimax Tire Nut Lock

A quick and easy solution to tire theft

Locks over the tire nut preventing removal

TMX TNL740

Trailer Locks / Wheel Chocks

Fulton Hitch Pin Lock

Tightens ball mount to receiver

hitch for "Rattle Free" operation

square receivers

FUL 63100

Trimax Coupler Lock

100% stainless steel

Fits up to 3-1/2" span

Features 1/4 turn technology that cannot be false locked

O ring keeps water, grime and dirt out of locking mechanism

Protective rubber cap protects keyhole


thqat will not bend or break


TMX SXTC3 Up to 3-1/2" span

1045

TRAILERING

Locks

Trimax Resettable Combination Lock

A resettable combination

Solid brass lock with 2” body

1-1/4” x 5/16” diameter hardened shackle

TMX TPC125

Trimax Padlock

Marine grade dual locking solid brass body lock

Hardened 1-1/8” x 5/16” diameter shackle

TMX TPB1125

Trimax Weatherproof Padlock

Weatherproof laminated solid steel body

lock with dual locking shackle.

1-1/8” x 5/16” shackle

TMX TPW1125

Trimax Padlock

4/pkg of keyed alike

Marine grade dual locking solid brass body lock

with a hardened .87” x .25” diameter shackle.

TMX TPB487

Fulton Cable Lock

Multi-purpose cable lock

High strength, vinyl coated steel cable

with locking pin

Locking end threads through pre-formed

loop in cable and secures into powder coated,

heavy duty cast lock

Includes two keys for end user convenience

FUL CLK15 0100 15'

Trimax Braided Cable

Quadra Braid cable with dual loops

TMX TDL1212 12' x 12mm

TMX TDL1510 15' x 10mm

Trimax Versa Cable Lock

A multi-use versa-cable lock featuring a

diameter with a locking cinching feature.

TMX VMAX6

Trimax LED Cable Lock

Push button LED illuminates combination

lock for easy night use

cable

Includes quick release bracket

TMX TRL126

with without

with without

without

1047

TRAILERING

Guardian Motor Support

Protects leading edge of motor’s lower unit

Reduces wear on steering mechanism

Bolt-on

High-strength cast aluminum with high-strength

composite components

SPR 1780236**

** Limited Quantities

Motor Support

Adjusts from 26” to 56”

Made for those hard to reach crossbars that

extend under the boat

Easy to install with included bracket attachment

SPR 1780250

For Most Boats:

Measure from a point on the bow 6" above the waterline to at least

2 ft. beyond the lowest point of the keel.

Measure from the bow eye to a point 4" to 6" forward of the jet

intake grate.

Megaware KeelGuard Protection

Manufactured from polycor, which offers superior abrasion and

corrosion resistance

Each kit contains KeelGuard, 3M VHB adhesive, burnishing

tool, 3M Scotchbrite pad, 3M #94 primer, and full instructions

Installs in minutes

The model 102 is 5 inches wide and designed for boats 16 feet and

above. It is also recommended for all personal watercraft.

MKG 102-4'ALMOND 5" x 4'

MKG 102-4'WHITE 5" x 4'

MKG 102-5'WHITE 5" x 5'

MKG 102-6'BLACK 5" x 6'

MKG 102-6'WHITE 5" x 6'

MKG 102-6'GREY 5" x 6'


MKG 102-7'WHITE 5" x 7'


MKG 102-8'WHITE 5" x 8'


MKG 102-8'BLACK 5" x 8'

MKG 102-9'WHITE 5" x 9'


MKG 102-10'WHITE 5" x 10'

MKG 102-12'WHITE 5" x 12'

Megaware KeelGuard Bowguard

Stainless steel bowguard protects your

gelcoat from bow rollers and trailer scuffs

Using 3M pressure sensitive adhesives,

bowguard installs in minutes

MKG SB-637 Solid, 5.75" x 4.5"

MKG 80637 Solid extra large, 9" x 8.75"

MKG SB-638 Notched, 5.75" x 4.5"

RockGARD

Boat Protection

Patented hull protection device

that eliminates road-tar and

damage caused by rocks and

road debris. Easy to install and

remove for safe access when

boat launching.

Zinc plated steel hardware

100% polyester mesh with UV resistant PVC black coating

One year warranty

ROC REGBLK Small 27"

ROC MEDIUMBLK Medium 33"

ROC LARGEBLK Large 39"

ROC SEADOOBLK* Seadoo

* Request Item

Guardian Motor Support

Protects leading edge of motor’s lower unit

Reduces wear on steering mechanism

Over the roller or bolt-on installation

High-strength cast aluminum with high-strength

composite components

SPR 1780242

Panther

Transom Saver / Motor Support

Motor support saves your transom during trailering

Adjusts from 28" to 59" to reach hard to access trailer crossbars

Comes with bracket attachment and 10" rubber bungee

Fits most popular brands of trailers

Easily removed for loading and unloading.

PAN 55-1900

Hull Protection / Motor Supports

1048

TRAILERING

Garelick Motor Tilt

Helps tilt motor back safely

without strain

Lightweight & compact

Made of 1" dia anodized

aluminum tubing

Good for motors up to 40 hp

GAR 71036

Garelick Boat Dolly

Clamps securely to the transom

Utilizes 1" sturdy zinc plated steel and 4

- 7" rubber tired wheels mounted on 1/2"

zinc plated steel axle

Ideal for moving boats from cars to water,

at lake homes, campsites and resorts

Maximum weight: 250 lbs

GAR 71050

Davis Small Boat Dolly

as small sailboats and dinghies. This dolly is constructed of heavy

duty anodized aluminum tubing and polypropylene struts with

delrin quick release buckles. A fold-away foot rod holds the dolly

upright to facilitate single-handed loading. Easily broken down for

transport.

Bunk is adjustable to 18" or 28"

Wheel spacing is 37"

Bunks are 19" long x 3" wide

Fully pneumatic tires: 16 x 4"

Weight Capacity: 250 lbs on hard

surfaces, 150 lbs in soft sand

DIN 1465

Garelick Motor Carrier

Convenient way to move outboards

1" alloy reinforced aluminum tubing

and semi-pneumatic rubber tires

Fold-down gas can holder with tie-

down strap

Accommodates long shaft motors

Folds for storage

Part # Max. Hp Max. lbs Height Tank Carrier

GAR 31600 30 130 36-3/4" Yes

Davis Motor Caddy Harness

Securely attaches to outboards,

providing a safe and secure handle

for carrying, hoisting, and moving

heavy, outboard motors

Made of tough UV-rated materials,

this harness is designed to remain on

the motor permanently

Easily removed, allowing quick access to the motor

One size works on all 2 - 15 hp outboards

DIN 430

Sierra Trailering Clips

Protect trim and tilt hydraulics

during trailering.

Mercury ONLY

SIE 18-9099 2/pkg

Motor Supports / Motor Carriers / Boat Dollies

Panther Trailering Clips

Fits most cylinder rods on engines

manufactured in 1997 and newer. Snaps

over outboards hydraulic steering

and cylinder rods. Helps keep engine

centered during transport.

PAN 55-2190 2/pkg

Garelick Motor Stand

1" alloy reinforced aluminum tubing &

black recycled plastic mounting board

Accommodates long shaft motors

Folds for storage

Part # Max. Hp Max. lbs Height Tank Carrier

GAR 30400 50 180 36" No

1049

TRAILERING

Boat Dollies / Davits / Letters & Totes

Endurance Universal Davit System

Made of PVC & S/S

Sold by the pair

END DH-1

*Glue not included*

Davis Wheel-A-Weigh

Launching Wheel

Wheel-a-Weigh launching wheels for small

boats and car toppers ride in tracks permanently

installed on the transom. Wheels lock in the

“down” position for transporting overland.

After launching, they lock in the “up” position.

Wheels are easily removed for storage or theft

prevention. These units are made of anodized

marine aluminum and stainless steel with injection

molded wheels.

Extra capacity

Fully pneumatic tires

Wheel dimensions: 16" x 4.0"

Weight capacity: 300 lbs. on hard surfaces,

200 lb. in soft sand

DIN 1481

Parts:

DIN R1481A Replacement strut

DIN R1481B Tire with hub

T-H Marine

Cooler Mounting Kit

Kit includes four corner brackets and

two hold down straps

Designed to prevent unwanted cooler

movement on your deck

Made from U.V. resistant materials

Comes with all mounting hardware including screws

Fits virtually all coolers including Igloo

THM CMK-1-DP

Scepter Storage Totes

Made from food grade polyethylene

Rust and dent proof

Withstand temperature changes

SCE 71216R Senior tote (19 gal) 24" x 20-1/8" x 12-3/8"

SCE 71217R Senior tote lid

Hardline Products Display Kit

22” x 24” hardboard display panel with

plastic pockets that come complete with 10

of each letter and 10 of each number in a

solid black die cut vinyl.

HRD 2B-P

Hardline Products

Stick-On Letter Kits

144 - 3" letters & numbers in a single

consumer pkg

4 of each letter and number

Letter a boat, PWC, snowmobile, car,

truck, mailbox, etc

HRD BLK350EC Black

HRD BLU350EC Blue

HRD RED350EC Red

HRD WHI350EC White

Hardline Products Stick On Numbers & Letters

The industries most Popular 3" style letters and numbers. The Dyer

style has become the standard for die-cut decals.

Meets USCG Regulations

Durable waterproof black or white vinyl

Laminated for fade and fuel resistance

Individually bar coded

Self-aligning alignment

Black Letters

HRD 3-SCB-P-(# or letter)

Example: to order the letter 'B" order DYE 3SCBPB

White Letters

HRD 3-SCW-P-(# or letter)

Example: to order the letter 'B" order DYE 3SCWPB

Dock Edge Dock Cart

Removable heavy wall poly bucket

Powder coated steel frame

Load capacity: 300 lbs

DOC 90-600-F

FSR ™

Fiberglass Stain Remover

Windex®

Wind Direction Indicator

Team™Telescoping

Boat Hooks & Paddles

On Top All Over the World!

The Best There Is!Specially formulated

for removing oil, rust,

exhaust, waterline

and transom stains.

Happy® Troller

Slows Motors Down

to that "Fish

Tantalizing"

Speed

Reduces speed in

"down" position,

acts as a stabilizer

in "up" position.

Proven the Best!Most dependable twist lock,

strongest hook… and they

float!

Reduces shock loads on dock lines,

towing lines, tie-downs, preventers

and cleats. 20” (51 cm) long. Patented.

Shockles® LineSnubber ™

Multipurpose Shock Absorber

Eases the tension on the anchor chain,

rode, snubber line, anchor roller, windlass

and cleats. Eliminates chain noise.

20” (51 cm) long.

AnchorSnubber ™ Ten times stronger than a standard

bungee cord. 18” (46 cm) long.

MiniShockle ™

A Bungee Cord on Steroids!

Wheels lock in "down" position

for overland transport, swing

up or detach after launch.

Extremely sensitive.

Tacking tab system

reads at a glance.

Wind tunnel tested

to over 80 knots.

Air-Dryr ™

Say Goodbye to Mold,

Mildew, Moisture

An inexpensive, effective way

to fight moisture problems

and corrosion. Silent, low-

cost operation.

Wheel-a-Weigh™

Boat Launching Wheels

make boat handling easy!

18.trailering

Sales

lbsbbs mb

lbsbbs sb

boat stands brownell

flat graybbs flat

boat coverscarver boat

vee orangebbs flat

vee graybbs vee

vee bluebbs vee