1er cahier gb - kopal · via the indexed movement of the fixed jaw ... quick alignment of the vice...
TRANSCRIPT
KOPAL HORIZONTAL CLAMPING SYSTEM22000 NEWTON
26
REF. : 09-004
HIGH CAPACITY VICE up to 280 mm with no limitation with divided vice
COMPACTseveral vices can be used together for multiple clamping
HIGH CLAMPING POWER up to 22 000 Newtons (2.2 TONNES for 5 M/kg)
WORKPIECE CENTRED ON THE TABLEvia the indexed movement of the fixed jaw
SIMPLE, QUICK AND PRECISE INSTALLATION on T-slot tables or tables with counterborings
SAVE TIME IN ASSEMBLY AND WORKPIECE CHANGEOVER OPERATIONS. ORGANISE YOUR FACTORY ASSEMBLY RATIONALLY IN A WAY
THAT IS ADAPTED TO MODERN PRODUCTION
2 .2 TONNES
POWER
STANDARD VICECAPACITY
One workpiece measuring 280 mm max.
INCLUDING 1 base plate : 09-015
length 400 mm, height 28 mm 1 moveable indexable jaw : 09-025
clamping range 16 mm 1 fixed indexable jaw : 09-080
width 60 mm
A REFERENCEIN CLAMPING VICES
REF. : 09-002
REF. : 09-006
HORIZONTAL CLAMPING SYSTEM KOPAL22000 NEWTON
27
DOUBLE VICE CAPACITY Two workpieces measuring 107 mm max.
INCLUDING 1 Base plate : 09-015length 400 mm, height 28 mm 2 moveable indexable jaws : 09-025 clamping range 16 mm 1 double fixed indexable jaw : 09-082width 60 mm
DOUBLEYOUR PRODUCTION
MOUNTING OF JAWS in a wide range of positions with two
rectied screws which ensure a HIGH LEVEL OF RESISTANCE.
HIGH ALIGNMENT PRECISION
MOUNTING OF VICE with standard Chc M 12 screws (supplied) and positionning index.QUICK ALIGNMENT OF the vice in relation to the machine axes.For T-SLOTS or MODULAR tables .
DIVIDED VICE CAPACITY
adapts to workpiece dimensions
INCLUDING 2 Base plates : 09-016
height 28 mm 1 moveable indexable jaw : 09-025
clamping range 16 mm 1 fixed indexable jaw : 09-080
width 60 mm
FOR ALL SIZES OF
WORKPIECES
2 .2 TONNES
POWER
30 26 - 42
18
26 55
34 MAXIMINI
KOPAL HORIZONTAL CLAMPING SYSTEM
REF. : 09-008
22000 NEWTON
28
ABSOLUTE PUSHING DOWN
Spannsystem KOPAL ©
CLAMPING : With the 8 mm clamping key provided you can obtain a clamping force of 2.2 tonnes at a maximum recommended torque of 5 m/kg.
Clamping Clamping torque force* N/m Kg 20 900 25 1100 30 1300 35 1500 40 1800 45 2000 50 2200 *average values
Kopal Key (provided) : customised and ergonomic
Torque wrench : precise and repetitive tightening
JICE JAWSFOR MACHINING MOUNTINGMOUNTING the jaws are spread out all around the workpiece
INCLUDING 1 moveable indexable jaw : 09-025 clamping range 16 mm 1 fixed indexable jaw : 09-080width 60 mm The machining mounting
is carried out depending on the dimensions of the workpiece.
MOUNTINGDrill 2 holes :
Centre distance 44 M 10 depth 28 mm
Ø 10,2 H 6 depth 14 mm
Clamping range 16 mm Jaw height 10 mm
60
4040
44
24
60
16 x 22 (352)
60Ø
10,2 M 10
2 x 4433
M 12
400
28
Ø 20
1212
24
60
44
3050
Ø 10,2
M 10 1544
60
22
7
3060
Ø 10,2
M 10
1544
60 7
60
Ø 20
104
138
44
M 12
80
3 x 22 (66)3 x 22 (66)
1114
28
18 - 3413
Ø 10,2
M 10
60
1030
860
44
1733
2718
HORIZONTAL CLAMPING SYSTEM KOPAL22000 NEWTON
29
Single xed jaw09-080
Moveable jaw 09-025
Prismatic
xed jaw09-084
Double xed jaw
09-082
Divided base plate 09-016
Semelle 400 m
m 09-015