1industrialemissionsdirective. 2 the european parliament is discussing the industrial emissions...
TRANSCRIPT
1
Industrial Industrial
Emissions Emissions
DirectiveDirective
2
The European Parliament is discussing the Industrial Emissions Directive as adopted by the Council for the second reading.
This Industrial Emissions Directive (IED) aims to protect all sorts of environments from industrial emissions, in a global framework of permits.
In an optimized approach, with a view to sustainable environmental protection, the IED should take into account
…the different local conditions (climate, topography…) and different technical characteristics of the plants and processes…
Industrial Industrial
Emissions Emissions
DirectiveDirective
3
EU history of industrial emissions regulation
The London smog in 1952 resulted in the Clean Air Act; the start of environmental legislation.
Some milestones before the IED …
The EU started legislating 30 years ago :
• 1975: Waste Framework Directive• 1978, 1982, 1992: Titanium Dioxide Directives• 1988: Large Combustion Plant Directive• 1999: Solvent Emissions Directive• 2000: Waste Incineration Directive
That was a sectoral approach until…
Industrial Industrial
Emissions Emissions
DirectiveDirective
4
… the launch of the Integrated Pollution Prevention and Control Directive (IPPC) in 1996
The purpose was to regulate industrial emissions
so as to ensure a high level of protection of the environment as a whole
emissions to air, water, land
generation of wastes use of raw materials energy efficiency noise & vibrations prevention of
accidents
Industrial Industrial
Emissions Emissions
DirectiveDirective
5
What is the basis of the 1996 IPPC Directive?
There are four key strong principles:
1. An integrated and combined approach2. The use of Best Available Techniques (BAT) , 3. The use of specific solutions adapted to the different
environments and industrial plants 4. The requirement of public consultation during permit
process.
Deadline for implementation was October 2007…
Industrial Industrial
Emissions Emissions
DirectiveDirective
6
What are the key elements of the IPPC directive?
1) BREFs - The ‘Seville Process’ produces the BREFs (Best available technique REFerence documents) for each industrial sector. The objective is to inform the relevant decision-makers about the Best Available Technique. They are produced by the “Seville Process” involving stakeholders.
2) The BAT (Best Available Techniques) found in the BREFs are the most effective techniques that are technically and economically available to industry in order to achieve a high general level protection of the environment.
Industrial Industrial
Emissions Emissions
DirectiveDirective
7
What are the key elements in the IPPC directive?
3) BATAELs (BAT Associated Emission Levels) are indicative emission levels (found in the BREFs) and relate to the efficiency of the techniques. They are to be used as a reference for establishing specific-site Emission Limit Values. They do not take account of process fluctuations or specific circumstances.
4) ELVs (Emission Limit Values) are safeguards to prevent/minimise environmental impact at the site location. They are not set in the BREF documents. They are legally binding.
Industrial Industrial
Emissions Emissions
DirectiveDirective
8
What are the key elements in the IPPC Directive?
5) “ Techniques “ include both the technology used and the way in which the installation is designed built, maintained, quoted and decommissionned
6) “ Available “ techniques: those developed on a sacle which allows implementation in the relevant industrial sector under economically and technically viable conditions, taking into consideration the costs and advantages, whether or not the techniques are used or produced inside the State in question, as long as they are accessible to the operator.
7) “ Best “ means most effective in achieving a high general level of protection for the environment as a whole
Industrial Industrial
Emissions Emissions
DirectiveDirective
9
What is the basis of the 1996 IPPC directive?
There is one underlying approach:
Both the industrial operator and the regulator must take an integrated overall look at the installations and all their environmental impacts,
using the European BREF (technical reference document) as a guideline, when taking decisions on how the installations should be operated.
Problem: an uneven implementation across States…
Industrial Industrial
Emissions Emissions
DirectiveDirective
10
1st reading voteEuropeanParliament
2009
Amendment in
ENVI
Vote in ENVI
ENVI (responsible)
ALDE: Mr Holger Krahmer (rapporteur)
EPP-DE: Mrs Elisabetta Gardini
PSE: Mrs Asa Westlund
GUE: Mrs Sabine Wils
Greens: Mrs Michèle Rivasi & Bas Eickhout
ECR: Martin Callanan
End of March 2010 May 2010
A reshaping process has been launched …
2 nd reading
July 2010
Industrial Industrial
Emissions Emissions
DirectiveDirective
11
What were the initial ideas of the Commission?A motive to simplify and strengthen drove the IED draft:
1) A more stringent approach with a view to achieving greater consistency in level of implementation.
2) Tighter Europe-wide Emission Limit Values for large combustion plants and for titanium dioxide industries
3) An initial quantitative soil assessment with remediation to the original state when the permit ceases.
4) A combination of 6 existing directives , including the IPPC directive in a single text to simplify environmental permitting.
In fact, some key elements of this IED approach, an over-simplification, may lead to « a one size fits all strategy », which does not always facilitate an adapted facilitate an adapted environmental protectionenvironmental protection
Industrial Industrial
Emissions Emissions
DirectiveDirective
12
A motive of better efficiency in the IED draft:
* The IED directive aims to disseminate best available technologies for the highest level of emission reductions
** The directive facilitates requirements beyond EU agreed standards ! (art 14.4)
*** The directive emphasizes on quantification as trigger for remediation as it is seen as a simple criterion (art 22.2)
**** Soil and ground water monitoring always focus on regular surveillance and periodic samplings (art 14.1)
In fact, the efficiency aim should be backed up by a more sustainable strategy
…which should keep on board environmental, social and economic impacts.
What were the initial ideas of the Commission?
Industrial Industrial
Emissions Emissions
DirectiveDirective
13
emission
What is the mechanism of the proposals?
number of units
If you compare the average emissions of a unit with those of other units of the same kind … … you can define
Best Available Techniques (BAT) for this process and their related average emission levels (BATAELs)
Industrial Industrial
Emissions Emissions
DirectiveDirective
14
emission
What is the mechanism of the proposals?
time
To achieve BATAEL on the average, set Emission Limit Values (ELVs) for normal operation accordingly
Industrial Industrial
Emissions Emissions
DirectiveDirective
15
What is our position ?The 1st reading Council common position has improved the IED draft
The “One size fits all approach” is not an absolute guarantee to achieve highest environmental protection and consistent implementation of an integrated approach.
That is why the provisions allowing useful and justified local adaptation for more sustainable environmental protection must be better secured.
Industrial Industrial
Emissions Emissions
DirectiveDirective
16
What is our position ?A sustainable IED needs to be in line with concrete specific needs:
• Different emissions behave differently in different locations: => competent authorities must be authorized to grant justified flexibility. (support Art 15.4)•Environmental protection needs a cost benefit analysis on the reductions and side effects :
=>going beyond Best Available Techniques by competent authorities must be fully justified (amend art 14.4);
=> remediation measures must be based on technical and economic feasibility (amend art 22.3)
Industrial Industrial
Emissions Emissions
DirectiveDirective
17
What is our position ?A pragmatic IED needs to be in line with concrete specific needs:
• The BATAEL must be based on representative datasets from all over the EU (support Art 13) •Combustion installations on chemical sites have a specific character as they burn specific fuels:
New Emission Limit Values (ELV) should be adapted to chemical plants burning off gases and residues (support Art 30-9).
Industrial Industrial
Emissions Emissions
DirectiveDirective
18
What is our position ?
A sustainable IED should build on the experience of stakeholders
• The opinion of the relevant stakeholders must be taken into account when adopting decisions on BAT:
=> the conclusions of the Seville process must be safeguarded during the comitology. (support Art 13.4)
=> Need for a stakeholder consultation when setting Emissions Limit Values in case of a missing BREF (amend Art 14.6)
Industrial Industrial
Emissions Emissions
DirectiveDirective
19
What is our position ?A sustainable IED needs to give certainty to investors
• Investment cycles executed and planned with a view to compliance with the LCP Directive must be recognised:
=> Transitional national plans must help progressively planned compliance with ELVs (support Art 32)
• New investors on existing sites cannot take unforseeable legal and financial risks:
=> a risk-based approach must be promoted to analyse the potential contamination of soil (amend Art 22.2)
Industrial Industrial
Emissions Emissions
DirectiveDirective
20
In
short
- Permit conditions that would take account of site-specific circumstances and considering technical & economic feasibility
-European requirements that would be set only where appropriate.
- BREFs and BATAELs that would be used as a basis for setting ELVs if supported by the appropriate experience of stakeholders
- proportionate and risk-based soil & ground water protection measures
Sustainable environmental protection would be ensured with:
Industrial Industrial
Emissions Emissions
DirectiveDirective
21
A justified level of flexibility can take on board environmental and economic considerations……
allowing society and environment to prosper in a sustainable way for the benefit of all
Industrial Industrial
Emissions Emissions
DirectiveDirective