1sitrain-pcs7-vol-i.pdf
TRANSCRIPT
-
SIEMENS
101UR2
Dow iJood to Module
$ PRQF1BUS DP
4 " __ | i3| IM153-2 -sdridav
sw (| MocUc QideiNutibei | 1 0 c5 fl D O a K 2 4 \/a & 6ES?32?&FO H H Be 0f If 6E S ~ X tt-7m & a *B 0 512 :
88182
IF 40& 72F * 6ES '3325H DO I-O M IO 51:IF AI2*HART. Ex 6ES7 331-71800 OABO
CP modcte
Pies; fi to get Help
Cancel
PROFIBUS PP foi 5*MaTIC S7 M " and C7 fti tnbuled to*.ki
MW Config (A S O l (Conf Download to Moduleor click the icon (point 1 in the slide)
The CPU keyswitch m ust be set to RUN_P.Then download in RUN state is offered.Should the CPU nevertheless go to STOP as a result of downloading in RUN, this is an indication that the CPU software is incomplete or does not capture the triggered events. This problem is automatically solved by using the PCS 7 driver blocks.
Training Centerfor Automation and Drives Page 22
SIMATIC PCS 7 System TrainingSystem Config