1z0-580 v8.02 formatted - gratis exam · 7/2/2013 · 1z0-580 v8.02_formatted number : 000-000...

1Z0-580 V8.02_formatted

Number: 000-000Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

Exam : 1Z0-580

Title : Oracle Solaris 11 Installation

and Configuration

Essentials

Version : V8.02

Exam A

QUESTION 1You have just completed a default oracle solaris 11 installation of a new server system. While testing networkconnectivity from your desktop to the server, you find that you are not able to communicate with the sendmailservice from your desktop.Why is this?

A. by default, sendmail solftware is not installed.B. by default, sendmail is not enabled on the system.C. by default, sendmail access is blocked by TCP Wrappers.D. by default. sendmail responds to local requests only.E. by default. sendmail is running on its encrypted port.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2What answer includes three correct methods available to transition oracle solaris 10 environments to oraclesolaris 11?

A. Solaris Upgrade installation, Live Upgrade, js2ai and Automated InstallB. Solaris Flash Arhive Installation, ZFS shadow migration, NFS sharing and pool migrationC. Custom JumpStart, Oracle Solaris 10 non-global zones, lu2be Conversion UtilityD. NFS file sharing and Pool migration, ZFS shadow migration.JumpStart Migration UtilityE. lu2be Conversion Utility, Solaris Flash Archive installation, Puppet



QUESTION 3Your system has two disk devices, c2t0d0 and c2t1d0, and two flash devices, c2t5d0 and c2t8d0. Whichcommand would you use to create a storage pool named tank , which mirrors the disks and adds the two flashdevices as cache ?

A. zpool create tank mirror c2t0d0 c2t1d0 mirror c2t5d0 c2t8d0B. zpool create tank mirror c2t0d0 c2t1d0 log mirror c2t5d0 c2t8d0C. zpool c2t0d0 c2t1d0 cache c2t5d0 c2t8d0 mirrorD. zpool create tank mirror c2t0d0 c2t1d0 cache c2t5d0 c2t8d0E. zpool create tank raidz2 c2t0d0 c2t1d0 c2t5d0 c2t8d0



QUESTION 4The storage administrator is configuring an iSCSI host to boot from the SAN. Which hardware component isrequired for the iSCSI host?

A. The iSCSIhost can use a NIC card to boot from the SAN.B. The iSCSI host must use a ToEcard to boot from the SAN.C. The iSCSI host must use a NIC card to boot from the SAN.D. The iSCSI host can use a ToE card to boot from the SAN.



QUESTION 5What is the difference between the default configuration for zones and an immutable zone?


A. Immutable zones cannot have users.B. Immutable zones cannot be modified from within the zone.C. Immutable zones cannot run DTrace.D. A process in an immutable zone can see processes in other zones.

Correct Answer: BSection: (none)Explanation


QUESTION 6Which three ZFS options may be combined to provide zones storage with data security and a minimal storagefootprint?

A. encryption=onB. security=onC. dedup=onD. compression=onE. zoned=on

Correct Answer: ACDSection: (none)Explanation


QUESTION 7Which five steps (dealing with first-boot script creation ) can be omitted when working with provisioning oraclesolaris 11 zones and services with appropriate zone context?- 1. Create the first-boot script.- 2. Create the manifest for an SMF service that runs once at first boot and executes the script.- 3. Create an IPS package that contains the service manifest and the script.- 4. Add the package to an IPS package repository- 5. Install that package during the Automated Installer installation by specifying that package in the AI manifest.

A. Step l can be omitted because the first-boot script is already deployed in the Global ZoneB. Step 3 can be omitted because zones do -t r equir eI PS packages and can accept SVR4 packageC. None of the steps can be omittedD. Step 5 can be omitted because Zones are not installable using Automated installer, yet.E. Step 2 can be omitted because zones do not have a concept of is booted, the script executes for all Zones.



QUESTION 8Which command would you use, if running tools like vmstat and prstat is resulting in file not found errors?

A. pkgB. installadmC. boot net:dhcp- installD. formatE. fdisk

Correct Answer: ASection: (none)Explanation


QUESTION 9A customer has forgotten the root password for one of his oracle solaris 11 x 86 servers. What is the correctmethod to enable him to recover or change the root password on his system?

A. Re-install Oracle Solaris 11 and create a new root password for the system.B. Reboot the system by using the init 6 command, interrupt the boot process, log in as root, and modify the

system s password file by using vi.C. Boot the system from the LiveCD, assume the root, mount the Oracle Solaris instance, and modify the

system s password file.D. Contact Oracle Support to obtain the Master System Password for all x86 systems, they will provide you

with an encrypted master password that will allow for root password recovery.E. Reboot the system into single user mode, then change the root password by using vi.

Correct Answer: CSection: (none)

Explanation


QUESTION 10The storage administrator has installed an Axiom and would like to change the system name and provide abrief description.Which action would the storage administrator need to complete?

A. modifying Network SettingsB. modifying Asset InformationC. modifying System TimeD. modifying Security Settings



QUESTION 11You are working on a system that appears to be hanging during the boot process. Which would be the bestcourse of action for determining which step in the boot process is causing the issue?

A. Boot the system into single user mode, run ps-ef to determine processes that are not runningB. Boot the system into the none milestone, enable all services, then run svcs- a to determine the services, as

well as check for error messages in/var/svc/log.C. Boot the system, disable all services using the svcs disable all command, reboot and bring up each service

individually.D. Interrupt the boot process before services are started with Stop-A or<CTRL><ALT><DELETE>.E. Perform an interactive boot, and disable services as they request startup.



QUESTION 12Which two statements are true when configuring and installing zones using automated installer?

A. Non-global zones are installed and configured on the first reboot after the global zone is installed.B. When a system is installed using Automated Installer, non-global zones can be installed on that system by

using the zone element in the AI manifest.C. When the system first boots after the global zones installation, the zones self-assembly SMF service

configures and installs each non-global zone defined in the global zone AI manifest.D. Labeled zones are autobooted if the zone is configured with autoboot=true, irrespective of the global zone.

Correct Answer: ACSection: (none)Explanation


QUESTION 13When attempting to perform an installation of oracle solaris 11, you encounter a failure messages along thelines of no offers were received.What is the most likely reason for this message and why?

A. The system could not obtain a DHCP-based Iease so it could not proceedB. The amount of disk space offered by the installer is inadequate so the installer attempted to compress data

in memoryC. The minimum amount of memory is not sufficient to Ioad the necessary network driver so the installer tried

to offer disk as backing storeD. An IP address provided is located on a different network segment because the correct RARP server did not

respond.E. The IP address provided is outside the range of allocatable addresses



QUESTION 14Which two options do you absolutely need to have in place in order to successfully customize the networkinstallation of an oracle Solaris 11 x86 system?

A. two Automated Installer manifests one for x86 systems and another ore for SPARC systemsB. an SMF system configuration profileC. an x80 system running Automated Installer serviceD. either a SPARC or an x86 system running Automated Installer serviceE. an Oracle Solaris l l IPS repository hosted in your own data center

Correct Answer: BDSection: (none)Explanation


QUESTION 15When upgrading to Oracle Solaris l11 from Oracle Solaris 11 Express or Oracle Solaris 11 Early Adopter, theprocess suddenly failsWhich command can you rely upon to get you to a good known state where you can still boot the Oracle Solaris11 Express or Oracle Solaris 11 Early Adopter image, as they were, prior to your upgrade attempt?

A. pkgB. beadmC. installadmD. zfsE. ifconfig



QUESTION 16What two entries could compete the following command from the directory listing below?

A. inetboot.SUN4U.Solaris_10-1B. inetboot.SUN4V.Solaris_10-1C. nbp.D. pxegrub.I86PC. Solaris_10-1E. sllgrub.i86pc

Correct Answer: ABSection: (none)Explanation


QUESTION 17After installing and customizing an oracle Solaris 11 non-global (Solaris brand) zone, you execute thesecommands

A. This change prevents MAC address spoofing by requiring outbound network packets to have a predefinedvalue.

B. This change enables support within the zone for Mac OS X extended file attributes for the zone root filesystem

C. This change restricts user access to objects in the zone based upon their Oracle Solaris Trusted Extensionlabels

D. This change prevents the zone from being able to mount any remote file systems once the zone has beenbooted.

E. This change forces the zone root file system into a read-only state where only pares of/var are writable

Correct Answer: ESection: (none)Explanation


QUESTION 18The beadm utility___.

A. can create and manage both UFS and ZFS boot environmentsB. cannot manage boot environment snapshotsC. can be used only on Solaris 11 for x86 systems that use GRUBD. can manage boot environments in non-global zonesE. cannot create a new boot environment from an inactive boot environment



QUESTION 19What two benefits will oracle and our customers likely realize by utilizing a fully integrated stack architecture?

A. They will receive hardware and software designed to work togetherB. Maintenance for the overall enterprise will be simplifiedC. Technical support will need to come from different vendors and the customer will need to manage separate

support contracts.D. Customers will be locked into the Oracle architecture.E. Customers will need to deal with more bugs and patches



QUESTION 20What has become the default graphical user interface for oracle Solaris 11 desktop operation?

A. CDE (Common Desktop Environment)B. Gnome DesktopC. x-Window SystemD. Firefox Web BrowserE. Java Desktop



QUESTION 21Your installation has completed successfully and the system did not reboot automatically.Which option would cause this?

A. Automatic reboots are only allowed when invoked via SMF

B. The client never reboots automatically after the successful installation staying available for manualverification of the install process

C. The auto_rebaot parameter in the Automated Installer manifest has not been set to trueD. The installadm service needed to be refreshed for the auto_reboot setting is to be applied, so all clients

being installed from it could rebootE. Post installation reboots are no longer necessary because the Oracle Solaris 11 Automated Installation

installs and activates the system s services in the desired state such that there is no need for a reboot

Correct Answer: CSection: (none)Explanation


QUESTION 22A zone fials to boot, and zoneadm produces the following message:

Which two approaches might resolve the problem and enable the zone to boot?

A. Change the network link, that will be used by that zoneB. Use dladm disable ner0 in the global zone to bring the NIC net0 down.C. Convert the zone to use shared-IP networkingD. Use dladm rename-link ner0 net9 in the global zoneE. Use netconfig disable net0 in the global zone



QUESTION 23What are the two reasons that network configurations are set using svccfg,ipadm,and nscfg?

A. to check for proper syntax before applying a changeB. to comply with Sarbane-Oxley and Payment Card Industry specificationsC. to hide defaults from casual usersD. because the vi (1) text editor is no longer availableE. to use SMF

Correct Answer: AESection: (none)Explanation


QUESTION 24The pkg update command will__.

A. update all packages that have updates available including the kernelB. update all packages that have updates available excluding the kernelC. update only the kernel imageD. update the global zone packages and non-global zone packagesE. update all packages and the kernel, and then automatically reboot the system



QUESTION 25Which command can be used to determine which apache web server packages are installed?

A. pkg list apacheB. pkg list *apache*C. pkg list installed apacheD. pkg list all apacheE. pkg list all web installed



QUESTION 26Name three items that illustrate the business value of an integrated stack approach.

A. The integrated stack method of product development optimizes performanceB. Multiple products from multiple vendors add up to an easier support structure and less fingerpointing when

issues arise.C. Support and implementation issues are minimized with an integrated stackD. An integrated stack will help to deliver faster innovation.E. To a smaller customer an integrated stack means that they need to purchase everything from one vendor.

Correct Answer: ACDSection: (none)Explanation


QUESTION 27When conducting an installation using Live Media(such as the Live DVD image, for example), the system bootsinto Console mode because the system s graphics card is not supported by the contents of the Live Media. Inlieu of downloading and using the Text Installer image, you opt to perform a remote installation using a secondsystem.Do both systems have to be on the same subnet in order for this method of installation to succeed?

A. Yes, furthermore they also have to be of the same architectureB. No, even though they must be of the same architecture.C. Insufficient information provided with respect to how they are networkedD. Yes, they both have to be on the same subnet and moreover, have to be of the same architecture.E. No they do not have to be on the same subnet, and do not have to be of the same architecture.



QUESTION 28What physical devices will be used in sequence to boot the system, given the following output?

A. disk then netB. /pci@780/pci@0/pci@1/network@0 then/pci@780/pci@0/pci@9/scsi@0/disk@0C. /pci@780/pci@0/pci@9/scsi@0 then/pci@780/pci@0/pci@1/network@0D. /pci@780/pci@0/pci@9/scsi@0/disk@1 then/pci@780/pci@0/pci@1/network@0,1E. /pcie780/pcie0/pcie9/scsie0/disk@0 then/tpci@780/pci@0/pci@1/network@0



QUESTION 29The storage administrator is creating a volume and wants to protect it from a full Brick failure. Identify theprotection level needed to accomplish this configuration.

A. Standard Redundancy

B. RAID10C. Double RedundancyD. assigning the volume toa Storage Domain



QUESTION 30When configuring zones using automated installer, the following line is found in the manifest:

A. the configuration file for the global zoneB. the resource groups for the tree ServerC. the configuration file for the non-global zonesD. the required corresponding open-source disclaimerE. the location of the apple IPS repo



QUESTION 31Which two actions must be taken to enable IP forwarding on all infterfaces yet disable on a specific interface?

A. routeadm-rB. ipadm set-addrpropC. ipadm set-ifpropD. routeadm-eE. dladm set-router

Correct Answer: CDSection: (none)Explanation


QUESTION 32Which command would result in safely detaching a disk or disks from a mirrored pool to create anotheridentical pool?

A. zfs split tank1 tank2B. zpool create tank mirror c1t0d0 c2t0d0C. zpool split tank1 tank2D. zpool detach tank c1t0d0E. zpool replace tank c1t1do c2tOd0



QUESTION 33What two features identify oracle solaris 11 as bing built for clouds ?

A. ability to use SSH to securely connect to Oracle Solaris 11 serversB. first fully virtualized operating system featuring built-in virtualization with ZonesC. secure rapid provisioning and lifecycle managementD. Oracle Solaris 11 has been designed to provide a robust and easily usable desktop environment for end

usersE. Oracle Solaris 11 is installable from DVD Media

Correct Answer: BCSection: (none)Explanation


QUESTION 34Which command would be used to restore the gedit package to its original as-delivered state?

A. pkg revert geditB. pkg restore geditC. pkg update gedit@originalD. pkg reinstall geditE. pkg reset gedit



QUESTION 35Identify two things that happen to the Private Interconnect Topology Manager tool, PITMAN, when a warmstartof the Slammer occurs.

A. Private Interconnect Topology Manager terminates its operation when running in manual mode.B. Private Interconnect Topology Manager restarts Its operation when running in manual mode.C. Private Interconnect Topology Manager terminates its operation when running in automatic mode.D. Private Interconnect Topology Manager returns to a monitoring state when running in automatic mode.E. Private Interconnect Topology Manager suspends its operation when running In automatic mode.F. Private Interconnect Topology Manager suspends Its operation when running in manual mode.

Correct Answer: ADSection: (none)Explanation


QUESTION 36Which IPS task requires special privileges?

A. Determine if a package is installed or can be updated.B. Identify the group to which a package belongsC. Determine if a package is in a particular categoryD. Determine if a package delivers a specified file.E. Create a copy of an existing IPS package repository



QUESTION 37The storage administrator is installing a single slammer Axiom with both FC and iSCSI. Identify the number ofSAN Fabric ports that the storage administrator will need for the Axiom.

A. 2 ISCSI portsB. 4 iSCSI portsC. 2 FC portsD. 4 FC ports



QUESTION 38Best practice for creating local IPS repositories recommends ______.

A. avoiding the use of ZFS to host repositoriesB. creating a separate ZFS file system for each repositoryC. hosting local repositories on separate serversD. replicating all publishers across all repository serversE. creating one large repository for all required software



QUESTION 39A customer has multiple applications and you believe consolidation using Oracle Solaris Zones will help them.The customer is concerned that consolidating them all on one physical server may cause adverse interactions

between them, causing problems with functionality, security, and performance What are the two benefits ofZones that would explain why Zones would be a good choice?

A. better single threaded performanceB. better software isolationC. better hardware isolationD. simpler VLAN managementE. simple effective resource controls

Correct Answer: BESection: (none)Explanation


QUESTION 40You are implementing three workloads, one in each of three zones. Which fire factors should you considerwhen configuring networking?

A. Are VLANs in use?B. The quantity of physical NICs in the system.C. The network bandwidth needs of the workloadsD. Which layer 4 protocol family is in use: TCP or UDP?E. The range of IP addresses that each zone can useF. The amount of processing capacity needed to handle network interrupts for each Zone.

Correct Answer: Section: (none)Explanation

Explanation/Reference:Answer: ABCEF

QUESTION 41When upgrading to oracle solaris 11 from oracle solaris 10, the Live Upgrade utilities are ______.

A. enhanced to automatically use js2ai and convert jumpstart rules to AI profiles and criteriaB. not available because there is no upgrade method from Oracle Solaris lo to Oracle Solaris 11C. available in a separate SVR4 package that you have to install onto Oracle Solaris 10 firstD. only available to you if you have a support agreement in place with OracleE. available at no cost from an IPS repository hosted all http://pkg.oracle.com



QUESTION 42Which is the preferred command to manage layer 3 network properties in oracle Solaris 11?

A. dladmB. ipadm

C. ifconfigD. netstatE. azp



QUESTION 43What is the next step in the network boot operation of this system, given the information below?****************************************************************************************************** Boot Device Priority *Specifies the boot ** ************************************************************************************************** *1st boot Device[Network IBA GE SIo ] * available devices * *2nd Boot Device [RAID: ASR-5805 PCI-]* **3th Boot Device [USB: TSSTcorp CD/DV]*A device enclosed in * *4th Boot Device [Network: IBA GE Slo] *parenthesis has been * *5th Boot Device [Network: IBA GE Slo] * disabled in the * *6th Boot Device [Network:IBA GE Slo] * corresponding type * **menu****Intel(R) Boot Agent GE v1.2.42Copyright (C) 1997-2006, Intel CorporationIntel(R) Boot Agent PXE Base Code (PXE-2.1 build 085)Copyright (C) 1997-2006, Intel CorporationCLIENT MAC ADDR: 00 1E 68 57 51 4A GUlD: 0B0020FF FFFF FFFF FFFF 001E6857514A CLIENT IP:10.79.200.235 HASK: 255.255.255.192 DHCP IP: 10.79.200.222 GAWAY IP: 10.79.200.193TFTP.PXE-T02: Access violationPXE-E3C: TFTP Error- Access Violation

A. Contact the secondary tftp server.B. Load the pxegrub fileC. Abandon network boot and hang.D. Boot the internal raid device.E. Boot the CDROM



QUESTION 44畇Which line would you remove in the GRUB menut o pr event an aut o mati ci ntallation from commencing

when booting from CD or DVD, but without intentions of installing?

A. install=defaultB. install=trueC. install=alwaysD. install=yesE. install=now

Correct Answer: BSection: (none)

Explanation


QUESTION 45To upgrade a system from oracle solaris 10 to oracle solaris 11,it is necessary to___

A. convert all Oracle Solaris 10 packages to Oracle Solaris 11 packages using IPSB. use IPS and Live Upgrade to install all updated softwareC. use IPS to replace the Oracle Solaris 10 kernel with the Oracle Solaris 11 kernelD. save user data and perform a flew Oracle Solaris 11 install; there is no upgrade methodE. update Oracle Solaris 10 from an Oracle Solaris 11 repository



QUESTION 46With which three link types do the dladm set-linkprop and show-linkprop subcommands work?

A. AggregationB. VNICC. FlowD. EtherstubE. IPMP

Correct Answer: ABDSection: (none)Explanation


QUESTION 47Which service must be enabled in order to create an ISCSI LUN?

A. iscsiB. stmfC. comstarD. sharelscsiE. sbdadrn



QUESTION 48You are attempting to create an iSCSI LUN on your Oracle Solaris 11 server.You type in the following

command to enable the storage-sever/COMSTAR package and you receive the following output.What is the problem?

A. The correct package name is COMSTARB. You have not installed the storage-server package from your IPS repository.C. You have mistyped the service name It is called stmfadm.D. The Oracle Solaris 11 software repository is missing.E. You need to install the stmf command first by typing root@solaris:~#m svcadm install stmf.



QUESTION 49Identify the role for the built-in administrator account.

A. Administrator1B. Pillar SupportC. Primary AdministratorD. Support



QUESTION 50Select three items which oracle Solaris 11 provides that would be valuable to customers in their enterprise ITenvironments.

A. Applications that run on Oracle Solaris are not guaranteed to run across different versions.B. Oracle Solaris 11 is capable of handling big data with a 128 bit file system with built-in deduplication,

compression, and encryption.C. Oracle Solaris 11 is not a virtualization friendly operating systemD. Storage assets have become more difficult to manage in Oracle Solaris 11.E. Oracle Solaris 11 provides simple rollback and fast upgradesF. Enterprise security is engineered with least privilege auditing and restricted root.

Correct Answer: BEFSection: (none)Explanation


QUESTION 51Which term describes a read-only copy or a file system or volume, which can be created quickly, easily, andinitially consumes no additional space within the pool?

A. vdevB. datasetC. snapshotD. cloneE. pool



QUESTION 52Which four statements are false in regard to performing an installation from media?

A. You can use the same service to install SPARC or x64 or x86-based systemsB. An incomplete installation can be resumed from the point it left off due to having unique checkpointing

capabilities, thus saving timeC. The entire contents of Oracle Solaris 11 can be installed from a single DVDD. Do not interrupt an installation that is in progress. An incomplete installation can leave a disk in an

indeterminate state.E. On an x86-based system with more than one operating system installed in it, you will not be able to partition

your disk during the installation process

Correct Answer: ABCESection: (none)Explanation


QUESTION 53A zone won t boot. Identify the five causes.

A. The zone is configured to have its own CPUs, and there aren t enough.B. The zone is configured to have exclusive access to an NIC, and the NIC is already up.C. The zone is configured to mount a file system, which is already mountedD. The zone is currently running or shutting down.E. The zone has been uninstalledF. Your terminal session is missing the SYS TIME privilege

Correct Answer: Section: (none)Explanation

Explanation/Reference:Answer: ABCDE

QUESTION 54The oracle Solaris image packaging system (IPS) cannot be used to_____.

A. manage local software repositoriesB. create new software repositoriesC. create new Oracle Solaris 11 boot environmentsD. restore an installed file to its original contentE. manage permissions of installed software

Correct Answer: AESection: (none)Explanation


QUESTION 55Which step is required to installthe gnu-emacs editor?

A. Identify and select the program s repositoryB. Identify the program s dependenciesC. Use the pkg command to initiate the installationD. Copy the program to its destination director after download.E. Enable the program s execution privileges



QUESTION 56Indentify two things that the following output from the disk format command tells us about our disk drive withregard to ZFS.

A. This disk is using the SMI labelB. This disk is using the correct label format to be used as a boot disk for Oracle Solaris 11 using ZFS.C. This disk is using all EFI labelD. The entire disk is being utilized as the root partition with the exception of the reserved space.E. This disk device has not been labeled yet.



QUESTION 57Which three options are features of the oracle Solaris 11 automated installer?

A. direct reuse of jumpstart profiles and rulesB. Solaris 11 Zones provisioningC. Solaris 10 branded (BrandZ) Zone provisioningD. directly bootable installation imagesE. Image Packaging System (1PS) integration

Correct Answer: BDESection: (none)Explanation


QUESTION 58Which three items describe the benefits that are gained by co-engineering oracle Solaris 11 with OracleDatabase, middleware, and Java tiers?

A. superior performanceB. unified commandsC. excellent scalabilityD. common installationE. higher availability

Correct Answer: ACESection: (none)Explanation



QUESTION 59As part of an automated install of oracle Solaris 11, a new role called operator is created and a password iscorrectly assigned, but you are not able to successfully assume this role.What is the problem?

A. You are not accessing the role from the system console.B. Your account is not yet authorized to assume this role.C. The operator role must be enabled before being used.D. You must first be assigned the Role User rights profile.E. The operator role is not yet assigned a profile shell.

Correct Answer: D

Section: (none)Explanation


QUESTION 60The storage administrator has installed MaxRep in the SAN environment. Identify how MaxRep communicatesto the Pillar Axiom storage system for volume discovery.

A. AxiomONE CLI commands through FCPB. AxiomONE CLI commands through TCP/IPC. SCSI commands through FCPD. SCSI commands through FCoE



QUESTION 61Which oracle solaris 11 milestone is equivalent to run level 2 on an oracle solaris 10 or earlier system?

A. svc: /milestone/single-user: defaultB. svc: /milestone/multi-user: defaultC. svc: /milestone/multi-user-server: defaultD. svc: /milestone/network: defaultE. svc: /milestone/self-assembly-complete: default



QUESTION 62In planning a system s initial configuration, you realize that you may not have sufficient disk space to completean installation that contains all of Oracle Sotiris 11 software. Which installation method would be your safest betto begin the interactive installation process?

A. Automated installerB. Text based installerC. LiveMedia, or LiveDVD imageD. Distribution constructorE. USB-based installer



QUESTION 63Which three options are true of the oracle Solaris 11 root file system?

A. ZFS is the default with UFS as an optionB. ZFS On rpool/ROOT is mandatoryC. Mirroring is enabled by defaultD. Alternate boot environments contain only the differences from the previous boot environments.E. Specific boot environments can be specified from GRUB (x86) as well as OBP (SPARC).

Correct Answer: BDESection: (none)Explanation


QUESTION 64Which two statements are true of the GRUB menu?

A. GRUB is the default boot Ioader for oracle Solaris 11 SPRC and x86B. GRUB supports Oracle Solaris and Oracle Linux onlyC. GRUB loads a kernel based upon the file name, disk, and partition specified.D. GRUB uses boot environments for all operating systems.E. GRUB is fully compliant with the Multiboot specification

Correct Answer: CESection: (none)Explanation


QUESTION 65When conducting an automated installation, the name of the resulting root pool is rpool1.Which is the direct Cause of this?

A. The system already has a root pool named rpoolB. The manifest declares the name of the root pool to use.C. rpool1 is the preexisting name of the root poolD. rpool is a reserved pool name that can only be used for factory-based installationsE. Of the two disks present for mirroring, the first is named rpool and the second is named rpool1 .



QUESTION 66What does the R signify in this output when using the new zfs diff command?

A. The file or directory is modified or the file or directory link has been changed.B. The file or directory is present in the older snapshot but not in the newer snapshot.C. The file or directory is present in the newer snapshot but not in the older snapshot.D. The file or directory has been renamed.E. The file or directory has been removed.



QUESTION 67Which two commands will show or make reference to the aggregation, immediately after creating the firstaggregation?

A. dladm show physB. dlaabm show-linkC. dladm show-vlanD. dlacha show-vnicE. dladm show-aggr

Correct Answer: BESection: (none)Explanation


QUESTION 68What does the following output mean?

A. OBP on this client supports WAN boot and this x86 client can be installed over the networkB. OBP on this client supports WAN boot and this SPARC client can be installed over the networkC. No network information can be set on this client to install it over the networkD. BIOS on this client supports WAN boot and this SPPARC client can be installed over the networkE. OBP on this client does support WAN boot but this client s data disks failedF. WAN boot is not supported and the client cannot be installed over the network



QUESTION 69What is the relevance of the -c argument in the output below?

A. the location of the cache directory used by NFS cacheB. the location of the cache directory used during an interrupted download processC. the location of the class directory containing various IPS class files needed by JavaD. the location of the images containing the MD5 checksum informationE. the location of all configured clients and their install criteria



QUESTION 70Two reasons to choose IPMP over link aggregation are _____.

A. want to use more than four physical linksB. want to have traffic use multiple swishesC. want to make unscheduled, immediate configuration changesD. have only one IP address and want all three links available to be used

Correct Answer: BCSection: (none)Explanation


QUESTION 71After installing an oracle solaris 11 system, you execute the following command to create a data set into whichseveral non-global zones will be installed:

What impact will this command have on any zones installed under this ZFS data set?

A. The zones will have encrypted swap and/tmp file systems.B. The zones will not permit any move or clone operationsC. The zones will be required to be Solaris brands only.D. The zones will cache the encryption key while running.

E. The zones will be unable to start during system boot.



QUESTION 72Virtualisation of physical hosts to oracle Solaris zones is aided by __.

A. Network Auto-MagicB. Pre-flight checkerC. Live MediaD. Automated InstallE. Copy-on-write



QUESTION 73When troubleshooting the client boot process, you notice the following scenario:

What is the most likely reason for this?

A. This error could occur if another DHCP server is responding to the clientB. This error could occur if the switch has auto-negotiation disabled.C. This error could occur when you try to use a x86 Automated Installer server to boot a SPARC clientD. There is an HTTP version mismatch.E. This error cannot occur if there is no DHCP server configured yet, so you need to configure one first



QUESTION 74The beadm list command produced the following output:

What is the interpretation of this output?

A. The solaris-3 boot environment image is not ready to boot.B. The solaris-3 boot environment image is active now and on next reboot.C. The Solaris boot environment image is the default.D. There are three copies of the Solaris boot environment imageE. There are no active boot environment images available



QUESTION 75What two actions are used to permanently configure anew interface?

A. diadm set-linkprop mtu=1500 net2B. ipadm create-addr-T static-a 10.2.3.5/24 net2/v4staticC. ipadm create-addr-a local=2ff0:: f3ad/64 -T static-t net2/v6dhcpD. ipadm create-ip net2

Correct Answer: BDSection: (none)Explanation


QUESTION 76Name three ways that oracle solaris 11 has been designed for next generation hardware.

A. extensive framework for Itanium processor support built-inB. capable of running hundreds of cores and thousands of threadsC. the entire internal network stack has been re-engineered for performance and virtualizationD. enhanced I/O performance including an enhanced NUMA I/O frameworkE. Oracle Solaris 11 includes support for up t0 2 GB of DRAM memory

Correct Answer: BCDSection: (none)Explanation


QUESTION 77List three reasons why oracle solaris 11 and sparc would be the best platforms for deploying an Oracle

database.

A. tight engineering integration between database and operating system development teamsB. continuous joint testing between data base and operating system development teamsC. world record performanceD. Oracle Solaris 11 is only available on the SPARC platformE. SPARC is the lowest cost hardware solution on the market today

Correct Answer: ACESection: (none)Explanation


QUESTION 78By default, a zone is automatically configured with type of network port.

A. ethernetB. token ringC. physicalD. VNICE. VLAN



QUESTION 79Which statement is true?

A. An Etherstub is required before creating two VNICsB. Traffic between two VNICs using the same underlying link can be seen on the physical interface.C. A VNIC can have up to four (4) VLAN tagsD. A virtual switch is created automatically when two VNICs are created on the same link.E. An aggregation can be created on top of a VNIC



QUESTION 80What three items are true with regard to network planning in a Solaris 11 environment?

A. Hardware and network topology should be planned in advance of installation.B. Subnetting needs to be considered when implementing IPv6 networksC. IPv4 and IPv6 network addressing cannot co-exist on the same serverD. Solaris 11 enables the use of local files, NIS, DNS, or LDAP for name services

E. The physical network topology will determine if you need routers, not all networks require routers.

Correct Answer: ADESection: (none)Explanation


QUESTION 81On an oracle solaris sparc system the command bootadm list-menu is expected to retum _______.

A. the Same information as beadm listB. the location and contents of the menu.lst fileC. the files and directories included in the boot environmentD. the bootfs, kernels, and module$ values for all boot environmentsE. the error Operation not supported



QUESTION 82In order to reassure your customer that ZFS filesystem encryption is secure and trustworthy, which three itemswould you include in your explanation of why they should use it?

A. ZFS has no built-in encryption, you must use a third-party encryption application.B. ZFS encryption is inheritable to descendant file systems.C. ZFS uses AES with key lengths or 128.192.or 256 bits.D. ZFS encryption is a separately licensable feature of the Solaris 11 Operating SystemE. ZFS encryption is integrated with the ZFS command set and the operations can be performed online

Correct Answer: BCESection: (none)Explanation


QUESTION 83With which two command(s) are IPMP groups created an managed?

A. ipmpstatB. ipmpadmC. ipamD. dladmE. netcfg



QUESTION 84Which command would be used to restore the gedit package to its original as-delivered state?

A. pkg revert geditB. pkg restore geditC. pkg update gedit@originalD. pkg reinstall geditE. pkg reset gedit



QUESTION 85Which method is recommended to increase the send or receive buffer sizes in order to improve networkperformance?

A. /etc/systemB. ipadm set-propC. ndd-setD. ipadm set-ifpropE. netcfg-b



QUESTION 86Name two features of the oracle solaris 11 network naming scheme.

A. based on the hardware driverB. uses location-based generic namingC. streamlines hardware replacementsD. expands user interface options



QUESTION 87Which resource controls should you use to maximize consistency of CPU performance?

A. CUP shares

B. CUP capC. RAM capD. Dedicated CPUsE. Locked memory cap



QUESTION 88Which command would you use to create an instant writable volume or file system whose initial contents arethe same as the dataset from which it was created?

A. zfs clone tank/testB. zfs snapshot tank/testC. zfs destroy tank/testD. zfs send tank/testE. zfs create clone tank/test



QUESTION 89What action does the command ?i pad mr efr es-addr net1/v4static2 perform?

A. checks for a duplicate address and marks an interface up if there is no duplicateB. renews an existing DHCP release, resetting the reservation timerC. refreshes the ARP cache and validates remote addressesD. checks the link status and retries any required link negotiation, such as speed and duplex state



QUESTION 90The command pkg list n *msql-5? produced the following output:

The IFO column of this output indicates that ______.

A. both versions of mysql are installed and version 5.0.91-0.171 is older

B. neither version of mysql is installed but either one can be selected for installationC. version 5.0.91-0.171 is obsolete and cannot be selected for installationD. version 5.1.37-0.174 is installed and can be updatedE. either version of mysql can be updated



QUESTION 91Identify the download location of the Axiom SNMP MIB.

A. the Pilot management controller accessed via a web browserB. the Support >Utilities branch in the AxiomONE Storage Services ManagerC. the Configure > SNMP branchin the AxiomONE Storage Services ManagerD. the Monitor > System Alerts branch in the AxiomONE Storage Services Manager



QUESTION 92A zone fails to boot, and zoneadm produces the following message:

Which two approaches might resolve the problem and enable the zone to boot?

A. Change the network link, that will be used by that zone.B. Use dladm disable net0 in the global zone to bring the NIC net0 down.C. Convert the zone to use shared-IP networking.D. Use dladm rename-link net0 net9 in the global zone.E. Use netconfig disable net0 in the global zone.



QUESTION 93Boot environments created using the beadm command _______.

A. cannot be destroyed

B. cannot be deactivated once they are activatedC. cannot be copied to a different zpoolD. can be created from a snapshot of an existing boot environmentE. cannot modify the properties of their base zpool



QUESTION 94A prerequisite to creating a static IPv6 address is ________.

A. IPv6 forwarding enabledB. an MTU greater than 1500 due to larger IP addressesC. a router that supports IPv6D. a link-local addressE. an IPv4 address



QUESTION 95Three zones each need access to shared data.Which configuration method can be used to safely achieve this goal?

A. Put the data on an NFS server, and mount that share from each zone.B. Put the data on an NFS server, mount the share in the global zone, and configure a loopback mount from

the global zone into each zone using zonecfg.C. Create an iscsi LUN on a remote server, accessible to the global zone.Give each zone direct device access

to the LUN.D. Create a LUN on a SAN and give the global zone access to it.Give each zone direct device access to the

LUN.E. Create a ZFS file system and utilize the cloning feature to replicate the data to the individual zones.



QUESTION 96What does the following command do when conducting a conversion from an oracle Solaris Jumpstartinfrastructure and using the js2ai facility?# pkg install install/js2ai

A. downloads and installs the js2ai utility from the default IPS publisherB. installs and creates the install/js2ai directory structure on the Automated Installer server

C. automatically converts rules to criteria filesD. automatically converts profiles to manifestsE. creates an installable js2ai package and places it in the install directory



QUESTION 97When installing oracle Solaris 11 on x86 client systems for installations that boot over the network, you mustselect the second entry in the GRUB boot menu to initiate an automated installation.Select the two truestatements.

A. Due to a timer present in GRUB, the default first entry would create a loop, booting from network and re-installing the system upon reboot, if left unattended.

B. The GRUB menu.lst specifies the first entry to simply boot the network image and if allowed to time-out, theinstallation would begin then.

C. This only happens on systems that have an older version of GRUB preinstalled on them already.D. This does not happen on SPARC systems.E. This does not happen with Oracle Enterprise Linux6 installed.



QUESTION 98A customer configuration requires controlling the bandwidth consumed by each of the zones that share aphysical NIC. To accomplish this, you should use the _____ command on the ____.Choose the two 2-partanswers that complete this sentence correctly.

A. ipadm, VNICsB. dladm, physical NICC. dladm, VNICsD. flowadm, VNICsE. zonecfg, zone s anet resource

Correct Answer: CESection: (none)Explanation


QUESTION 99Network boot of Oracle Solaris x86 systems on subnets without a DHCP server is accomplished with ______.

A. WAN boot settings in BIOSB. JS config settings in DHCP serversC. DHCP helper settings in routers

D. IP filter settings in AI serversE. PXEboot assistant in BOP



QUESTION 100What three options are true, given the following command output?

A. The machine has had its boot-config setting changed from default.B. Zones will not autoboot.C. The results of the commands reboot and init 6 are the same.D. The results of the commands reboot-f and init 6 are the same.E. The full bootloader and firmware processes will be executed on a reboot.

Correct Answer: ADESection: (none)Explanation


QUESTION 101To copy a repository to your system using IPS, you must _______.

A. use the pkgrecv command to install the repositoryB. update the boot environment that will use the repositoryC. remove all prior instances of the required repositoryD. update all dependent repositoriesE. restart the repository server



QUESTION 102The command beadm create a solaris-test will_____.

A. create and automatically boot the solaris-test boot environmentB. create and activate the solaris-test boot environment but not rebootC. create and activate of the solaris-test boot environmentD. will not create a new boot environment without further information

E. will only activate a previously defined boot environment named solaris-test



QUESTION 103What information would the beadm list ds command output ?

A. a list of all BesB. a list of the datasets and snapshot information for the active BEC. a list of the datasets and snapshot information for all BESD. a list of the default setsE. a list of BES in machine readable format



QUESTION 104The oracle solaris image packing systems (IPS)

A. requires the administrator to create software repositoriesB. requires a network connection to the Oracle software repositoriesC. automatically includes and installs required software dependenciesD. can be used on Oracle Solaris 10 with SVR4 packagesE. can be used to manage remote systems repositories



QUESTION 105You are performing an initial AI installation of Oracle Solaris 11.You have not identified a target disk for the rootpool and your installation fails.What are the two possible disk-based reasons for this failure?

A. You need to specify the dump and swap partitions in the AI manifest to perform a successful Oracle Solaris11 installation.

B. The disk does not have an SMI labelC. You have not specified a mirrored dataset for the root poolD. The disk or slice does not match or meet the recommended size parameters of approximately 13 GB.E. ZFS requires the disk to be partitioned first and the root partition must be active

Correct Answer: BDSection: (none)

Explanation


QUESTION 106What are the three properties of a business critical cloud infrastructure?

A. service isolationB. flexible, virtual application instancesC. dedicated, single purpose file serversD. easy, intuitive provisioning, chargeback, and capacity planningE. rigid inflexible network design

Correct Answer: ABDSection: (none)Explanation


QUESTION 107When attempting to perform an installation of Oracle Solaris 11, you encounter a failure message along thelines of no offers were received.What is the most likely reason for this message and why?

A. The system could not obtain a DHCP-based lease so it could not proceed.B. The amount of disk space offered by the installer is inadequate so the installer attempted to compress data

in memory.C. The minimum amount of memory is not sufficient to load the necessary network driver so the installer tried

to offer disk as backing store.D. An IP address provided is located on a different network segment because the correct RARP server did not

respond.E. The IP address provided is outside the range of allocatable addresses.



QUESTION 108The storage administrator wants to look at the overall status of the Axiom.Which location should be used to accomplish this task?

A. Navigate to Monitor > System StatusB. Navigate to Monitor > HardwareC. Navigate to Support > UtilitiesD. Navigate to Support > Tools > System TroubleE. Navigate to Monitor > Reporting



QUESTION 109What is the expected behavior when running the following command on an x86 system? # boot net: dhcp

A. The system attempts to boot from the network, using DHCP only.B. The system will fail.C. The boot process will download the mini-root image and present a menu of choices.D. The system will attempt to boot from the network, using DHCP if it can, and if not, it will try ARP.E. The system will ask you if you are sure about running boot at this time.



QUESTION 110What are the two functions of a Storage Profile?

A. It provides a standardized set of quickly repeatable attributes for an application.B. It specifies a set of Quality of Service attributes that are used to optimize & logical volume for a specific

application or task.C. It determines the amount of storage allocated to the volume based on the application that is using the

volume.D. It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming

volume to a higher performance storage.E. It specifics the Storage Domain to be used when creating the logical volume for a specificapplicationor task.




1z0-580 v8.02 formatted - gratis exam · 7/2/2013 · 1z0-580 v8.02_formatted number : 000-000...

Documents