20 th anniversary scientific-educational center of shs misis-isman
DESCRIPTION
20 th Anniversary Scientific-Educational Center of SHS MISIS-ISMAN. International Workshop "Synthesis and Commercialization of Advanced Nanostructured Materials and Coatings". October 22, 2009 Leninsky prospect 4, Moscow, 119049. Organizers of the Event - PowerPoint PPT PresentationTRANSCRIPT
20th AnniversaryScientific-Educational Center of SHS
MISIS-ISMAN
International Workshop"Synthesis and Commercialization of Advanced
Nanostructured Materials and Coatings"
October 22, 2009 Leninsky prospect 4, Moscow, 119049
Organizers of the Event● State Technological University “Moscow Institute of
Steel and Alloys” (MISIS)● Institute of Structural Macrokinetics and Materials
Science Problems of the Russian Academy of Science (ISMAN)
Event is supported by ● State Technological University “Moscow Institute of
Steel and Alloys” ● Federal Agency for Science and Innovations (FASI)
● Russian Academy of Science● Russian Academy of Natural Science
Workshop Co-Chairmans: Prof. Evgeny Levashov
Prof. Alexander Merzhanov
International Committee MembersProf. Inna Borovinskaya, Russia
Dr. Satoru Hosomi, Tomei Diamond Co., Ltd., Japan Prof. Yury Karabasov, State DUMA, Russia
Prof. Dmitry Livanov, MISIS, Russia Dr. Slobodan Milonich, The Vinca Inst. of Nuclear Sc., Serbia
Prof. John Moore, Colorado School of Mines, USA Prof. Dmitry Shtansky, MISIS, Russia
Dr. Richard Suchentrunk, Galvanotechnik Journal, GermanyDr. Alexei Yerokhin, University of Sheffield, United Kingdom
Workshop is devoted to 20 years Anniversary of Scientific-Educational Center of SHS MISIS - ISMAN (SHS-Center). Nowadays the SHS-Center is a multidisciplinary scientific-
educational center with a wide area of scientific activity: SHS, mechanical activation assisted SHS (MA SHS), physics of combustion, structural macrokinetic, material science of
ceramics, intermetallides, composites and functionally graded materials, nanostructured materials, hard- wear- corrosion-
heat- resistant coatings, biocompatible thin films and coatings, nanodispersion strengthened coatings, surface engineering
technologies i.e. magnetron sputtering, ion implantation, ion implantation assisted magnetron sputtering, pulse electrospark
deposition (PED), chemical reaction assisted PED (CRAPED), attestation and metrology of mechanical and
tribological properties of nanostructured surfaces.The expertise and research leadership of SHS- Centre is
evidenced by above 600 publications on mentioned fields of expertise in referees journals, books, proceedings, and multiple
patents and “know-how” on the technologies. The teams of SHS- Centre collaborates with leading research centres in the
USA, Japan, Europe, and Asia.Staffs of SHS- Centre are members of International
Association on SHS (SHS-AS), Int. Committee on SHS, European Joint Committee for Plasma and Ion Surface
Engineering (EJC/PISE), International Advisory Committee on FGM, Int. Committee on Metallurgical Coatings and Thin Films, Int. Committee of World Ceramic Congress CIMTEC. SHS-Center is a current member of the Advanced Coatings
and Surface Engineering Laboratory (ACSEL) at the Colorado School of Mines.
SCIENTIFIC PROGRAM (Draft)Welcome Addresses 10.00 – 10.30
Session I “SHS of Advanced Materials”: 10.30 – 12.10
Session Chairs: Dr. Satoru Hosomi, Dr. Slobodan Milonich
10:30 – 10:50 Combustion Mechanism in Ti-Ta-C System. Structure Formation and Oxidation Resistance of SHS- productsEvgeny Levashov, V.Kurbatkina, A. Rogachev, N. Kochetov, E. Patsera
10:50 – 11:10 SHS- Die Casting of Metal Matrix CompositesJohn Moore
11:10 – 11:30 Dense in situ Ceramic Matrix Composites via Pressure Assisted Thermal Explosion Mode of SHS: From Basic Research to Fabrication of Structural Parts Elazar Gutmanas and I. Gotman
11:30 – 11:50 New Classes of SHS ProcessesAlexander Rogachev
11:50 – 12:10 Welding of Rails by Original “VINCA” Aluminothermite Mixture; Some Experience Gained in SerbiaMisa Todorovic, M. Trtanj
Awarding Ceremony 12.10 – 12.30 Lunch 12.30 – 13.30
Session II “Functional Coatings and Thin Films”: 13.30 – 14.50Session Chairs: Prof. John Moore, Prof. Evgeny Levashov
13:30 – 13:50 Search for Ultrahard Materials and Recent Progress in the Understanding of Hardness Enhancement and Properties of NanocompositesStan Veprek
13:50 – 14:10 Multifunctional Bioactive Nanostructured Films for Metallic Implants Dmitry Shtansky, I.A. Bashkova, N.A. Gloushankova, Ph.V. Kiryukhantsev-Korneev, A.N. Sheveiko, I.V. Reshetov, A.S. Grigoryan, B.N. Mavrin, A. Fernandez, E.A. Levashov
14:10 – 14:30 Nanocomposite Coatings with Thermal Stability and Protection of Substrate Against Oxidation Above 1000C Jindrich Musil
Coffee Break and Poster Session 15.30 – 16.50
Session III “Advanced Nanosized Materials” : 16.50 – 17.50Session Chair: Dr. Richard Suchentrunk, Dr. Alexei Yerokhin
16:50 – 17:10 The Properties of Submicron Single Crystalline Diamond Particles Satoru Hosomi, H. Yamanaka, S. Morino, K. Kumekawa
17:10 – 17:30 Stable Colloidal Dispersions of Metal Oxides. Synthesis, Properties and Applications Slobodan Milonjic
17:30 – 17:50 Synthesis of Nanostructures in Bulgaria. Advanced Technologies and Their ApplicationStavri Stavrev
BANQUET: 18.00 - 22.00
In Restaurant near MISIS
14:30 – 14:50 Advanced Plasma Electrolytic Oxidation Methods to Enhance Functional Performance of Light-Weight Materials
Alexei Yerokhin, A Matthews
14:50 – 15:10 From Micro to Nano – 20 Years Thin Film and Plasma Technology Richard Suchentrunk
15:10 – 15:30 Nano-particle Doped Sol Gel Coatings For Active Corrosion Protection of Aluminum AlloysFranz Gammel, Dominik Raps, Theo Hack
Poster Session
1. Pulse Electrospark and PVD Deposition of Cr-Based Sublayer on WC-6%Co Substrate for Quality Improvement of CVD Diamond FilmE.V. Azarova, E.A. Levashov, E.I Zamulaeva, V.G. Ralchenko, A.P. Bolshakov, S. Hosomi
2. Combustion Features in Some Nanostructured SystemH.E. Grigoryan, A.S. Rogachev
3. Formation of Porosity CoTi-Materials by SHSO.K. Kamynina, I. Gotman, E. Gutmanas, A.E. Sytschev, S.G. Vadchenko and E.N. Balikhina
4. Amorphous Cr-Al-Si-B and Cr-Al-Si-B-N Coatings Deposited by Magnetron Sputtering of SHS-TargetsPh.V. Kiryukhantsev-Korneev, J.F. Pierson, J.Ph. Bauer, E.A. Levashov, D.V. Shtansky
5. Effect of Nitrogen Partial Pressure on Structure and Properties of Hard Cr-B-(N) CoatingsPh.V. Kiryukhantsev-Korneev, A.N. Sheveyko, Yu.S. Pogozhev, J.F. Pierson, B.N. Mavrin, E.A. Levashov, D.V. Shtansky
6. Hard Nanostructured Coatings for High-Temperature Tribological ApplicationsPh.V. Kiryukhantsev-Korneev, A.N. Sheveyko, E.A. Levashov, R. Cecchini, C. Paternoster, A. Fabrizi, D.V. Shtansky
7. Hard Nanostructured Coatings Produced by Magnetron Sputtering of MAX-phase Ti2-xCrxAlC targetsPh.V. Kiryukhantsev-Korneev, A.N. Sheveiko, C. Rojas,A. Fernandez, B.N. Mavrin, E.A. Levashov, D.V. Shtansky
8. Structure, Mechanical and Tribological Properties of Hard Ti-Al-Si-C-N CoatingsPh.V. Kiryukhantsev-Korneev, A.V. Bondarev, I.A. Bashkova, E.A. Levashov, D.V. Shtansky
9. About Mechanical Activation Influence on the Particular Properties and Structure of Ni+Al and Ti+Al MixturesKochetov N. A, Rogachev A.S. Ko valev D. Yu.
10. Dispersion Hardening Ceramic Materials Produced Using SHSV.V. Kurbatkina, E.A.Levashov, O.S. Lysenko
11. Mechanoactivation of SHSV.V. Kurbatkina, E.A.Levashov, A.S. Rogachev 12. Nanodispersion Strengthened Electrode Materials for Pulse Electrospark Deposition Е. А. Levashov, А. Е. Kudryashov, Yu. S. Pogozhev, Е. I. Zamulaeva, S.K. Мilonjic, M. Todorovic
13. Pulsed Electrospark Deposition of Low Friction Coatings Е. А. Levashov, А. Е. Kudryashov, Е. I. Zamulaeva, Zh. V. Eremeeva
14. Industrial Application of New Electrode Materials, Facilities, and Processes for PEDЕ. А. Levashov, А. Е. Kudryashov, Е. I. Zamulaeva, Yu. S. Pogozhev, А. N. Sheveiko
15. Chemical Reaction Assisted Pulsed Electrospark Deposition (CRAPED) Е. А. Levashov, А. Е. Kudryashov, Е. I. Zamulaeva, S. Hosomi
16. Diamond Containing FGMs and Disperse-Strengthened by Nanoparticles ToolsE.A. Levashov, V.V. Kurbatkina, A.A. Zaitsev, V.A. Andreev, S. Hosomi, M. Ohyanagi
17. Self-Propagating High-Temperature Synthesis of Electrode Materials Dispersion-Strengthened With Nanoparticles for Pulse Electrospark DepositionE.A. Levashov, Yu.S. Pogozhev, A.E. Kudryashov, S.K. Milonjic, M. Todorovic
18. New Composite Ceramic Materials in Ti-Al-Si3N4-C System Produced by Combustion Synthesis E.A. Levashov, Yu.S. Pogozhev, D.V. Shtansky, J.J. Moore
19. Nanostructured WC–Co-Based Electrode MaterialsЕ. А. Levashov, Е. I. Zamulaeva, А. Е. Kudryashov
20. Effect of Mechanoactivation on Combustion and Structure Formation in Cr – B System
E. I. Patsera, E.A. Levashov, V.V. Kurbatkina, A.S. Rogachev, N.A. Kochetov
21. The Attestation of Functional Properties of Nanostructured Coatings by Advanced Mechanical Surface Testing
M.I. Petrzhik, M.Ya. Tyurina, N.S. Kozlova, E.A. Levashov
22. Amorphous Nanostructured Wear Resistant Coatings of Titanium Alloys for Tribological Applications
M.I. Petrzhik, M.Ya. Tyurina, E.I. Zamulaeva, T.V. Sviridova, V.V. Molokanov, P.V. Vakaev, E.A. Levashov
23. Characterization of As-Quenched Co-Based Silica Glass Covered Microwires by Selective Indentation and AFM
M.I. Petrzhik, E.V. Zamyatkina, M.R. Filonov, E.A. Levashov, V. V Molokanov
24. Self-Propagating High-Temperature Synthesis of Mn+1AXn Phases in Ti-Cr-Al-C System
Yu.S. Pogozhev, S.I. Rupasov, E.I. Patsera, V.V. Kurbatkina, E.A. Levashov
25. Effect of Mechanical Activation on Synthesis of MAX- phases CrxTi2-xAlC
S.I. Rupasov, V.V. Kurbatkina, E.A. Levashov
26. Multilayer and Nanocomposite TiCrBN/WSex Coatings with Reduced Friction Coefficient
A.N. Sheveyko, Ph.V. Kiryukhantsev-Korneev, B.N. Mavrin, D.V. Shtansky
27. Effect of Nanosized Additives on Sintering Process and Properties of Cobalt and Iron Based Alloys
A.A. Zaitsev, V.V. Kurbatkina, E.A. Levashov
28. Determination of Particle Size and Microstrain of Mechanically Activated Nanostructured Materials Based on XRD and SEM data
N. F. Shkodich, R. B. Neder, A. Magerl, A.S.Rogachev
More info & contact persons:Mrs. Olga Lysenko, e-mail: [email protected]; tel: +495-638-44-09
Dr. Irina Bashkova, e-mail: [email protected] ; tel: +495-236-32-91