APRIL 2007 MODERN STEEL CONSTRUCTION

2007 exhibitors nascc: the steel conference 4D Steel Detailing (USA) Ltd.Booth 349Level 4, 137 Kilmore StreetChristchurch, New ZealandPh: 64.3.377.5880 Toll Free: 866.273.4232, x806Fax: 64.3.377.5882www.steel-detailing.com4D Steel Detailing (USA) Ltd., established in 1995, is based in Christchurch, New Zealand. Our core business is focused on servicing an international clientele based wholly in the U.S. 4D uses state-of-the-art detailing software—TSSD—for creating 3D models of the complete steel structure, including all relevant information required for ordering, fabrication, and erection. The company focuses on large-scale steel construction, up to 12,000 tonnes, with a growing specialty in larger projects.

AceCad Software, Inc.Booth 419825 Springdale Dr.Whiteland Business ParkExton, PA 19341Ph: 610.280.9840Fax: 610.280.9841www.strucad.comEstablished in 1986, AceCad Software is a leading developer of software solutions for the international structural steel indus-try. AceCad’s products include StruCad, the World’s leading 3D steel detailing system; and StruM.I.S, the ultimate management information system for steelwork fabricators. Adoption of these products results in significantly increased productivity and gen-erates competitive advantages for users. Together with a range of services including training, technical support, drawing/design offices, and a dedicated hardware business, AceCad offers the broadest integrated portfolio of solutions to the industry.

AISC CertificationBooth 4571 E. Wacker Dr., Suite 700Chicago, IL 60601Ph: 312.670.7520Fax: 312.670.9030www.aisc.org/certificationThe AISC Certification process involves an assessment to evaluate a fabricator’s or erector’s quality management system rather than their specific end product. This evaluation looks at processes and procedures, since it’s easier to build quality into a project and impossible to inspect for it after the fact. AISC Certified compa-nies have the knowledge, training, experience, capability, person-nel, equipment, organization, and commitment to provide a level of quality that you have come to expect and deserve.

AISC Online Steel Detailing CourseBooth 456201 5660 192nd St.Surrey, BC V3S 2V7CanadaPh: 604.606.5800Fax: 604.574.3827www.dowco.comRecognizing the growing need for skilled steel detailers in the industry, Dowco, under the guidance and direction of the AISC Committee on Steel Detailing, is pleased to announce the launch of AISC’s new Online Steel Detailing Training Course. Stop by the special booth near the AISC booth for additional information, including a demonstration.

Albina Pipe Bending Co., Inc.Booth 74812080 S.W. Myslony St.Tualatin, OR 97062Ph: 503.692.6010Toll Free: 866.252.4628Fax: 503.692.6020www.albinapipebending.comSpecializing in pipe, square and rectangular tube, structural steel, and spiral bending; forming; and fabrication since 1939. Ability to bend architecturally exposed material ranging from 1/8”- 26” OD. ½” up to 20” tubing (easy-way, hard-way, compound or off-axis). Angle, flat bar, square bar, wide flange (I-beam), channel, plate and split tee, etc. (easy-way, hard -way or off-axis). Architectural exposure quality spiraling of tube steel, channel, plate, and pipe to tight radii and steep pitches.

Algoma Steel, Inc.Booth 7195515 North Service Rd.Burlington, ON L7L 6G4CanadaPh: 905.331.3400Fax: 905.331.3408www.algoma.comA mainstay of the North American steel industry for more than 100 years, Algoma Steel is a fully integrated steel mill with annual production of more than 2.2 million tons of value-added hot-rolled sheet, cold-rolled sheet, as-rolled plate, and heat-treated plate. With clean steel from integrated steelmaking, Algoma’s Welded Beam Division produces high-quality welded wide flange (WWF) beams and welded shapes (WSS).

Allied Machine & Engineering CorporationBooth 1036120 Deeds Dr.PO Box 36Dover, OH 44622Ph: 330.343.4283Toll Free: 800.321.5537Fax: 330.602.3400www.alliedmachine.comAllied Machine & Engineering Corp’s. solution for hole-making in structural steel materials is available as a standard offer-ing. Designed specifically for use on I-beams and steel plating materials, this patent-pending drilling system—drill inserts and holders—delivers outstanding results. AMEC Structural Steel drill inserts are available in the following geometries: T-A Thin Wall geometry insert, ideal for materials up to and including 7/16” thick; T-A Notch Point geometry insert, designed for material greater than 7/16” thick; and T-A 150º Notch Point Structural Steel drill insert, new from AMEC, especially designed to reduce exit burrs, best suited in materials greater than 7/16” thick.

Allied Tube & ConduitBooth 44016100 S. Lathrop Ave.Harvey, IL 60426Toll Free: 800.882.5543Fax: 708.339.2399www.alliedtube.comAllied Tube proudly manufactures in-line galvanized tube and angles for the construction and OEM marketplaces. The Allied process is a unique method to galvanize the product while still online. We offer a broad range of sizes and lengths to meet cus-tom requirements. Allied Tube is a Tyco International company.

American Galvanizers AssociationBooth 2356881 S. Holly Cir., Suite 108Centennial, CO 80112Ph: 720.554.0900Toll Free: 800.468.7732Fax: 720.554.0909www.galvanizeit.orgSince 1935, the AGA has represented the North American after-fabrication hot-dip galvanizing industry. The AGA publishes a vast inventory of technical literature, presents seminars to educate in the specification and use of hot-dip galvanizing, and provides free technical support for fabricators, specifiers, and users of galvanized steel.

American Institute of Steel Construction (AISC)Booth 4571 E. Wacker Dr., Suite 700Chicago, IL 60601Ph: 312.670.2400Fax: 312.670.5403www.aisc.orgLearn about AISC’s prod-ucts and solutions, including information about our ePubs program. Chat with AISC staff and meet AISC’s Steel Solutions Center team.

American Metal MarketBooth 2431250 Broadway, 26th FloorNew York, NY 10001Ph: 212.213.6202Toll Free: 800.METAL.25Fax: 212.213.6273www.amm.comAmerican Metal Market is a daily publication providing news and pricing information on the North American steel, nonferrous, and scrap markets. Celebrating 125 years of continuous publication, AMM is relied upon by executives to help them in their critical day-to-day decision-making process. AMM and its family of prod-ucts have the world of metals information covered.

American Punch CompanyBooth 103027101 Tungsten Rd.Euclid, OH 44132Toll Free: 800.243.1492www.americanpunchco.comAmerican Punch has been supplying AISC members with the best punches, dies, and shear blades available. We now offer our CobraCut brand of annular cutters, along with magnetic drills and portable punch units. All CobraCut cutters are made from a special blend of high speed steel and cobalt. This special blend of material along with the high performance cutting tooth geometry improves cutting ease and tool life: a distinct advantage over all the others.

American Subcontractors AssociationBooth 2501004 Duke St.Alexandria, VA 22314Ph: 703.684.3450Fax: 703.836.3482www.asaonline.comFounded in 1966, ASA amplifies the voice of and leads trade contractors to improve the business environment for the con-struction industry and to serve as a steward for the community. ASA’s vision is to be the united voice dedicated to improving the business environment in the construction industry. The ideals and beliefs of ASA are: ethical and equitable business practices, quality construction, a safe and healthy work environment, and integrity and membership diversity.

American Welding SocietyBooth 821550 NW LeJeune RoadMiami, FL 33126Ph: 305.443.9353Toll Free: 800.443.9353Fax: 305.442.7451www.aws.orgThe American Welding Society (AWS) was founded in 1919 as a multifaceted, nonprofit organization with a goal to advance the science, technology, and application of welding and related join-ing disciplines. From factory floor to high-rise construction, from military weaponry to home products, AWS continues to lead the way in supporting welding education and technology develop-ment. The American Welding Society’s activities include stan-dards development, personal certification, trade show manage-ment, magazine and book publishing, and educational events.

A-Plus GalvanizingBooth 6271100 N. OhioPO Box 2717Salina, KS 67402-2717Ph: 785.820.9823Fax: 785.820.9816www.aplusgalv.comSpecializing in hot-dip galvanizing of oversized material, with kettle dimensions of 82’ long x 10’ wide x 12’ deep, A-Plus Galvanizing, LLC is home of the Super Kettle, the world’s largest hot-dip gal-vanizing kettle. Oversized structures such as an 88,000-lb tower anchor for a cable stayed bridge, an 82’ x 10’ smoke stack assem-bly, and 81’ railroad bridge beams have been hot dipped galvanized in a single dip. Eighty acres of on-site storage available.

MODERN STEEL CONSTRUCTION APRIL 2007

nascc: the steel conference 2007 exhibitorsApplied Bolting Technology, Inc.Booth 7441413 Rockingham Rd.Bellows Falls, VT 05101Ph: 802.460.3100Toll Free: 800.552.1999Fax: 802.460.3104www.appliedbolting.com

Applied Bolting makes direct tension indicators (DTI’s) user-friendly. With the introduction of Squirter DTIs, made in accordance with ASTM F959, we have all but eliminated the need for feeler gauges. By eye, one can tell when the bolts are tight. Erectors ask for them by name. Millions of Squirt-ers have been spec’ed and installed on power plants, HRSGs, SCRs, LNG facilities, DOT bridges, commercial buildings, and stadiums.

Arcelor International AmericaBooth 426350 Hudson St.New York, NY 10014Ph: 212.520.7627Fax: 212.520.7702www.arcelorusa.comArcelor (formerly TradeArbed, Aceralia, and Usinor) is the world’s largest producer of structural shapes, having served the U.S. mar-ket for more than 75 years. Our ASTM A913 Grade 50 and Grade 65 steels offer superior beam characteristics, including higher yield strength, excellent toughness, and outstanding weld ability—in most cases, without preheating. Arcelor also produces WF beams sizes W14x426 through W14x730 (Jumbos) and numerous deep W36, W40, and W44 beams unavailable domestically.

Association for Iron & Steel Technology (AIST)Booth 224186 Thorn Hill Rd.Warrendale, PA 15086Ph: 724.776.6040Fax: 724.776.1880www.aist.orgThe Association for Iron & Steel Technology (AIST) was formed on Jan. 1, 2004, by the merger of the Iron & Steel Society and the Association of Iron and Steel Engineers. AIST is an interna-tional technical association representing one of the largest steel-related associations in the world, with more than 13,600 iron and steel producers, their allied suppliers, and related academia. The Association is dedicated to advancing the technical development, production, processing, and application of iron and steel.

Assurance Agency Ltd.Booth 9401 Century Center1750 E. Golf Rd.Schaumburg, IL 60173Ph: 847.463.7183Fax: 847.440.9126www.assuranceagency.com

Assurance Agency is one of the top 100 insurance brokers in America and has partnered with AISC to bring customized insur-ance products and services to members. Utilizing a select group of national and regional insurers, Assurance has now developed a premier member insurance program with one of the leading program managers in the nation. This program will cover all lines of insurance, fabrication, and erection exposures for qualified

AISC members. Please visit our booth or contact Bob Barrese at 847.463.7183 (bbarrese@assuranceagency.com), Gary Peter-son at 847.463.7296 (gpeterson@assuranceagency.com), or Dan Bruno at 847.463.7117 (dbruno@assuranceagency.com) for more information.

ASTM InternationalBooth 623100 Barr Harbor Dr.West Conshohocken, PA 19428Ph: 610.832.9585Fax: 610.832.9555www.astm.orgFor over a century, the metals industry has relied on ASTM International for the latest technical information. ASTM’s 12,000 standards are crucial to the information infrastructure that guides design, manufacturing, and trade worldwide. These standards and related technical information are available online, in print, and on CD-ROM.

Atema, Inc.Booth 553303 E. Wacker Dr., Suite 300Chicago, IL 60601Ph: 312.861.3000Fax: 216.373.7297www.atemainc.comAtema provides quality-related training and assistance for the structural steel industry. Atema specializes in AISC, AWS, and ISO certification/registration programs. Atema’s services include pre-assessments; on-call assistance; on-site customized training programs; and executive management assistance to managers of structural steel firms. Engineers, GCs, building officials, and DOTs use Atema’s services to evaluate their supply chain and create specialized assessment, certification, and evaluation pro-grams. Investigate Atema’s courses for continuing education for Welding Inspectors and CWIs combined with quality tools. Stop by Booth 553 to catch your M&Ms!

Aztec Galvanizing ServicesBooth 6531300 S. University Dr., Suite 200Fort Worth, TX 76107Ph: 817.810.0095Fax: 817.336.5354www.aztecgalvanizing.comAztec Galvanizing Services, a division of AZZ, Inc—headquartered in Fort Worth, Texas—owns and operates 14 galvanizing plants located in the South, Southwest and Midwest. Aztec operates kettles ranging from 25’ to 58’ in length. Aztec’s network of plants provides customized turnaround times with the highest of quality standards. Aztec has introduced GalvXtra (their nickel-zinc alloy process), which has been very effective in providing uniformity and quality demanded by the after-fabrication steel market.

BD Structural DesignBooth 52585 J-Armand Bombardier, Suite 200Boucherville, QC J4B 8P1CanadaPh: 450.641.1434Fax: 450.449.1772www.bdsd.comBD Structural Design is a leading structural steel detailing com-pany founded in 1975. Our services cover the production of shop drawing, erection diagram, anchor bolts layout, reports, ABM, connections design cals, and sketches linked with our automatic Parametric Transfer into the 3D Model. The 3D Model reflects exactly the design with no possibility of error. We concentrate on heavy industrial building, stadium, complex architectural building, power plant, tower, and skyscraper. No limit on size.

BDS Steel Detailers, Inc.Booth 6402166 E. University Dr., Suite 200Tempe, AZ 85281Ph: 480.615.1700Fax: 480.615.1717www.bdsglobal.comBDS Steel Detailers is one of the largest detailing companies in the world, with 130 production detailers working on some of the most complex projects in existence. Our experience includes all types of projects including high-rise buildings, sports stadiums, power plants, hangars, and convention centers. We are the larg-est Tekla Structures (Xsteel) user in the world.

Bechtel National, Inc.Booth 8222435 Stevens Center PlaceMS14-1BRichland, WA 99354Ph: 509.371.2000Fax: 509.371.2046www.bechtelvitplant.comBechtel National, Inc. is using the latest 3D engineering, project management, and control tools to design and build a first-of-a-kind nuclear facility to solve the world’s most complex environ-mental challenge. The Hanford vitrification plant project provides an opportunity to work with the best—people who have honed their skills on the world’s toughest jobs. We’re hiring engineers in nearly every discipline as well as project controls and procurment professionals. Work with the best, open doors to global opportu-nities, and join us as we make history.

Bechtel Power Booth 450www.bechtel.com/ca-reersBechtel, a global engineer-ing-construction organiza-tion, is recruiting individuals for rewarding careers in the delivery of power-generating facilities and retrofits. Oppor-tunities are available in engineering for senior civil engineers involved in the layout and design of boiler and turbine buildings on medium-to-large-scale projects and civil engineers/designers with experience in Tekla Structures (Xsteel).

Behringer Saws, Inc.Booth 1051721 Hemlock Rd.Morgantown, PA 19543Ph: 610.286.9777Toll Free: 888.234.7464Fax: 610.286.9699www.behringersaws.comBehringer Saws is the leading manufacturer of high-performance horizontal band saw machines and plate saws, as well as Beh-ringer-Eisele circular cold saws. Our robust construction allows for vibration-free cutting, assuring the best cuts in regard to accu-racy, quality, and speed. In addition, the inherent design features deliver the industry standard for constant material removal rates and blade life. With more than 120 machine models in our line and cutting capacity up to 82, you can be assured we have a model to meet your specific needs.

Bentley Systems, Inc. - RAM/STAAD Solution CenterBooth 313685 Stockton Dr.Exton, PA 19341-1151Ph: 610.458.5000Toll Free: 800.Bentleywww.bentley.comBentley Systems, Inc. welcomes RAM, STAAD, and ProSteel to the Bentley family, and expands their reach as the leader in structural solutions. Offering the most comprehensive suite of analysis, design, detailing, and construction documentation tools anywhere, Bentley’s flexible and scalable products allow seam-less workflow throughout the entire project for building, plant, and civil applications. Completely integrated solutions are available for reinforced concrete, post-tensioned concrete, steel, wood, cold-formed steel, aluminum, and masonry.

Birmingham Fastener, Inc.Booth 233931 Avenue WBirmingham, AL 35214Ph: 205.595.3511Toll Free: 800.695.3511Fax: 205.591.7107www.bhamfast.comBirmingham Fastener is a full-line distributor of structural fasten-ers, both domestic and foreign. We have a manufacturing facility that enables us to provide you with non-standard structural bolts, as well as any type of welded assembly, threaded rod, or bent anchor rod you may need.

APRIL 2007 MODERN STEEL CONSTRUCTION

2007 exhibitors nascc: the steel conference Brown Consulting Services Ltd.Booth 45220325 Budde Cemetery Rd.Houston, TX 77388Ph: 281.260.9749Toll Free: 888.728.2272Fax: 281.260.9771www.steelconnectiondesign.comA professional engineering firm located in Houston, TX spe-cializing in structural steel connection design and stair and miscellaneous steel design. Licensed in 46 states and the U.S. Virgin Islands, Brown also offers structural design services, engineering supervision of shop drawings, forensic engineer-ing, expert witness testimony, lump-sum project pricing, pro-fessional liability insurance ($2M) and quick turnaround. Email al@steelconnectiondesign.com for a quote on your next project.

Buckner CompaniesBooth 648PO Box 5984732 NC 54 EastGraham, NC 27253Ph: 336.376.8888Fax: 336.376.8855www.bucknercompanies.comSince 1947, Buckner Companies have provided workmanship, met demanding schedules, and completed complex projects. We are ranked number seven by ENR’s listing of Top Steel Erectors. Buck-ner Steel Erection is an AISC and PCI Certified Erector. Over 600 years of experience is encompassed in Buckner’s Management Supervisory and Administrative teams. Buckner Heavy Lift Cranes has one of the largest and most versatile equipment fleets in the nation. Ranked by International Cranes and Specialized Transport as one of the Top Crane Companies in the world.

Bug-O SystemsBooth 9363001 W. Carson St.Pittsburgh, PA 15204Toll Free: 800.245.3186Fax: 412.331.0383www.bugo.comBug-O Systems/Cypress Welding Equipment, a manufacturer of welding and cutting automation equipment, will display its newest innovations for increasing productivity. The Bug-O Gantry and Side Beam Units are custom-designed assemblies that are used in a variety of applications such as beam and stiffener fabrication. The Mini-Vert is a trackless battery powered fillet welder. The Uni-Bug III will produce stitch or continuous welds and will run on a variety of structural steel profiles.

Burlington AutomationBooth 10205041 Fairview St.Burlington, ON L7L 4W8CanadaPh: 905.681.9622Fax: 905.333.1477www.burlingtonautomation.comBurlington Automation manufactures the PentARC 3D Robotic Plasma Cutting System, which is designed to replace Beam Drill, BandSaw, and Coping machines with one system that can do it all eliminating material handling between operations and using the least shop space. The PentARC can produce holes and slots approved by AISC for structural joints as well as cut to length, cope, miter cut, notch, mark, and scribe all structural steel shapes and sizes. In addition to producing CNC holes in a beam, imagine doing a full cope in 45 seconds, making a cutout for bracing in 30 seconds, or fabricating and laying out complete stair stringers in 5 minutes. No drill line can do that.

CAMBCO, Inc.Booth 1038320 Sugarberry CircleHouston, TX 77024-7248Ph: 713.781.9702Fax: 713.781.0193www.cambcoinc.comCAMBCO, the original cambering machine company developed the first commercially available cambering machine in 1984. We now offer eight models to meet any cambering need from small commercial buildings to highway bridges. The Model 420 will camber Grade 50 beams as large as a W30x116, while the Model 1700 will camber a W36x439 or a W40x397. Special versions adapted to be fed by a conveyor system are available.

Canam Steel CorporationBooth 5314010 Clay St.Point of Rocks, MD 21777Ph: 301.874.5141Toll Free: 800.638.4293Fax: 301.874.3357www.canam.ws

Canam Steel Corporation is a leading designer and fabricator of open web steel joists, girders, and bridging at our four U.S. plants certified by SJI, AISC, AWB, and CWB. Complex joists, including barrel, bowstring, scissor, double- and triple-pitched, and long

spans up to 130 ft, are our feature products. Our joists are formed of small cold formed channels to pro-vide individual web members for most steel joists span-ning over 30 feet.

Carboline/AD Fire ProtectionBooth 344350 Hanley Industrial CourtSt. Louis, MO 63144Ph: 314.644.1000Fax: 314.644.4617www.carboline.comCarboline Company offers a comprehensive product line for pro-tecting steel through high-performance coatings and fireproofing. Product lines include permanent zinc primers (Carbozinc), rapid-cure shop systems, and long-term weathering finishes (Carbox-ane). We specialize in fabrication-friendly systems. Both heavy duty (Pyrocrete) and intumescent (Nullifire and AD Firefilm) fireproofing offers a variety of design features for architects and owners who are interested in long term appearance and performance.

Cerabco Ltd.Booth 819809 Harrison St.Frenchtown, NJ 08825Ph: 908.996.1333Fax: 908.996.0023www.cerbaco.comCerbaco will provide samples from its line of 500+ configurations of non-metallic weld backings that permit finished-quality, full-penetra-tion welds from one side. Where one-sided welding is not desirable, the backings eliminate the need for arc gouging or heavy grinding prior to second-side welding. The company specializes in furnish-ing custom configurations and formulations. Technical assistance and free custom design services will be offered.

Chaparral SteelBooth 636300 Ward Rd.Midlothian, TX 76065Ph: 972.779.1735Toll Free: 800.527.7979Fax: 972.779.1236www.chapusa.comChapparral Steel is the second-largest producer of wide-flange beams in the U.S. The company maintains a low-cost profile at its four rolling mills located in Midlothian, TX and Petersburg, VA. Chaparral Steel features its FAST-FRAME frame-delivery sys-tem. A FAST-FRAME team consists of a structural engineer, a steel fabricator, a detailer, and the mill. The engineer designs from available inventory in concert with the fabricator. Working together form the onset of a project, teams have delivered frames 40% faster than by conventional methods.

Chatham Steel CorporationBooth 650501 W. Boundary St.Savannah, GA 31401Ph: 912.233.5751Toll Free: 800.800.1337Fax: 912.044.0236www.chathamsteel.comChatham Steel Corporation serves more than 3,000 customers throughout the Southeast from its five strategically located ser-vice centers. Chatham stocks a breadth and depth of product lines for full-line service. Primary product lines include Carbon, Stainless, Aluminum, High Strength, and Alloy Steel. Our com-plete in-house processing capabilities include plasma and flame shape burning and beveling, shearing and bending, sawing, drill-ing, and more.

Chicago Metal Rolled ProductsBooth 5503715 S. Rockwell St.Chicago IL 606322193 Manchester Dr.Kansas City, MO 64126Toll Free: 800.798.4504Fax: 773.650.1439www.cmrp.com

Roll-curving of every size of angle, bar, channel, and tee up to W44×285# the hard way (x-x axis) on the world’s largest beam bender. Tube and pipe bending up to 20” OD, from tight bends (2× the OD of the pipe) to large sweeps. Rectangular tubing up to 20×12. Low-deformation, thin-wall bending for weight-sensitive applications. In addition to single-radius bending in one plane, Chi-cago Metal Rolled Products also offers rolling off-axis and multi-axis bends; multi-radius bends;

true, helical coils; and plumb, circular stair stringers. Hard-way, easy-way, and every way in between!

Cleveland City ForgeBooth 33846950 State Route 18 WestWellington, OH 44090Ph: 440.647.5400Fax: 440.647.4185www.clevelandcityforge.comCleveland City Forge is a world leader in structural steel hard-ware. Products include clevises, turnbuckles, turnbuckle assem-blies, threaded rod, adjustable yokes, eyenuts, eyebolts, and rod ends.

Cleveland Punch & Die Company, TheBooth 1236666 Pratt St.PO Box 769Ravenna, OH 44266Ph: 330.296.4342Toll Free: 800.451.4342Fax: 330.296.6377www.clevelandpunch.comThe Cleveland Punch & Die Company is a world leader in manu-facturing for more than 127 years. We draw upon a vast resource of knowledge, expertise, and tradition as we dedicate ourselves to creating the world’s best punches, dies, and related products. We take pride in the fact that we engineer, manufacture, heat treat, and inspect all of our products in-house, from start to finish.

CMC Steel Products & CMC JoistBooth 4252305 Ridge Rd., Suite 202Rockwall, TX 75087Ph: 972.772.0769Toll Free: 800.308.9925Fax: 972.772.0882www.cmcsteelproducts.com; www.cmcjoist.comCMC Steel Products is proud to introduce the SMARTBEAM, the intelligent alternative for long-span composite floor construction or long-span roof applications for architecturally exposed steel.

MODERN STEEL CONSTRUCTION APRIL 2007

nascc: the steel conference 2007 exhibitorsCombiliftBooth 818ClontibretCo Monaghan, IrelandPh: 281.507.0066Toll Free: 877.COMBI.56Fax: 336.378.8842www.combilift.comThe Combilift is an engine-powered four-directional forklift designed primarily for handling long loads in confined areas. Suitable for use both inside and out, the machine can operate in aisles as narrow as 2 meters. The fully synchronized four-way steering system provides excellent maneuverability

COMEQ, Inc.Booth 1230PO Box 207White Marsh, MD 21162Ph: 410.933.8500Fax: 410.933.1600www.comeq.comCOMEQ, Inc. introduces the GEKA C2PL CNC angle pro-cessing line, the fastest and most compact angle line on the market. This machine fea-tures two punching units (one per leg), and its single cut (no slug loss) shearing action insures maximum material usage. This lightning-fast unit can punch cycle 70 times per minute and has a traverse speed of 1,500 per minute, resulting in 25 operations per minute on commonly produced clip angles. Offering up to 6 x 6 x 1/2 angle and 20 x 3/4 flat processing lines.

Computers and Structures, Inc.Booth 7311995 University Ave., Suite 540Berkeley, CA 94704Ph: 510.845.2177Fax: 510.845.4096www.csiberkeley.comComputers and Structures, Inc. specializes in structural and earthquake engineering software. The products offered by CSI (SAP2000, ETABS, and SAFE) cover a wide range of structural applications from high-rise buildings to multi-use, one- and two-story structures (industrial structures and hospi-tals) to bridges (suspension, cable stayed, and multi-span) to transmission towers. For nearly three decades, CSI software has been used for the analysis and design of major projects in more than 150 countries.

Controlled Automation, Inc.Booth 1330PO Box 888Bryant, AR 72089Ph: 501.557.5109Fax: 501.557.5618www.controlledautomation.com

Controlled Automation, Inc. was established in 1986 and is a manufacturer of angle punch lines, beam punch lines, drill lines, plate burning, drilling and punching machines, and material han-dling systems. All new machines manufactured in their entirety in our shops in Bryant, Arkansas. In addition to new machinery, we also have one of the largest rebuild and retrofit shops in the country and offer packages for angle lines, beam lines, drill lines and burning tables. We are a single source company for service, electronics, software, and design.

Corus International AmericasBooth 657475 N. Martingale Rd., Suite 400Schaumburg, IL 60173Ph: 847.619.0400Toll Free: 800.542.6244Fax: 847.619.0468www.corusnorthamerica.comCorus is one of the world’s largest steel producers and a lead-ing manufacturer of structural shapes. Corus also provides many innovative steel construction solutions such as Slimdek, Bi-Steel, and a large size range of cold- and hot-finished HSS products. Corus International Americas specializes in providing product and service packages to contractors and designers throughout the world, blended with industry knowledge and expertise that is specific to North, Central, and South America.

Creative Engineering ServicesBooth 645160 Durham Ave., Suite 101Metuchen, NJ 08840Ph: 732.662.4532Fax: 732.601.4845www.crenser.comCreative Engineering Services provides steel detailing and con-nection design services. Using Tekla Structures for 3D modeling, we provide customized shop drawings to our customers. CES combines today’s technology with the detailing trade to improve productivity for many fabricators. Our project managers bring many years of fabrication and erection experience to make your project fit perfectly on-site.

CSC, Inc.Booth 549500 N. Michigan Ave., Suite 300Chicago, IL 60611Toll Free: 877.710.2053Fax: 312.321.6489www.cscworld.comCSC, supplier of the increasingly popular TEDDS calculation software, is finalizing detailed plans to launch a brand-new soft-ware application for structural steel buildings in North America, during 2007. Visit Booth 549 to find out more about this exciting new product called Fastrak Building Designer.

Daito USA, Inc.Booth 12501470 Elmhurst Rd.Elk Grove Village, IL 60007Ph: 847.437.6788Fax: 847.437.6789www.daito-seiki.comDaito is known for their award-winning engineering, uncompro-mising commitment to quality, and superior customer service. We offer a full line of machines for small, medium, and large plants. The world’s finest CNC drilling machines for structural beams, band saw machines, and coping machines for structural steel fabricators are Daito machines.

Delta Structural Steel ServicesBooth 216300 S. FreemanIdaho Falls, ID 83401Ph: 208.528.6110Fax: 208.529.5621www.degroup.comDelta Structural Steel Services was established in 1991 to meet the detailing and engineering needs of local steel fabricators and erectors. Since 1991, Delta has expanded its customer base across the country, from Alaska to South Carolina. Delta uses state-of-the-art computer technology to provide accurate detail-ing and design to our customers, while striving to lower overall project costs. Delta’s projects are as varied as the Arizona Car-dinals Stadium to wastewater facilities and in size from 50 tons to 2,380 tons

Design DataBooth 4131501 Old Cheney Rd.Lincoln, NE 68512Ph: 402.441.4000Toll Free: 800.443.0782Fax: 402.441.4045www.sds2.com

Design Data has more than 25 years of experience in producing its premier SDS/2 steel detailing software. Throughout its history, Design Data has been an innovator by bringing new and excit-ing concepts to market. SDS/2 gives you the power of automatic connection design and erectability checks along with the flexibility of parametrics and adaptive detailing. From the engineer’s office to the shop floor through erection, SDS/2 provides cus-tomers a central model to col-laborate time-critical projects. SDS/2 is the perfect fit for every steel organization want-ing a competitive advantage.

Design-Build Institute of America Booth 9201100 H St., NW, Suite 500Washington, D.C. 20005Ph: 202.682.0110Toll Free: 866.692.0110Fax: 202.682.5877www.dbia.orgThe Design-Build Institute of America was founded in 1993 in response to the emergence of design-build and integrated proj-ect delivery as a significant force in the design and construc-tion industry. From its headquarters in Washington, D.C. and its network of chapters throughout the U.S., the institute provides a forum for all participants in the design-build process, owners and practitioners alike. DBIA is the center of expertise for inte-grated project delivery, advocating best practices, creating and disseminating educational information, and furnishing advice and support to facility owners and users.

Detailed Design Drafting Services Ltd.Booth 438#220 - 198 E. Island Hwy.Parksville, BC V9Y 8E6CanadaPh: 250.248.4871Fax: 250.248.4826www.detaileddesign.comDetailed Design Drafting is an industry leader in structural steel detailing. We utilize Tekla Structures (Xsteel) detailing software. We currently have 55 staff and have detailed a wide variety of projects including, design-build projects, coal boilers, gas plants, international airports, hospitals, schools, and transit buildings. We offer all data for fully automated shops including, .kss files, cnc data, point-to-point lists for bolts, and many custom reports for the shop and field.

Dowco Consultants Ltd.Booth 219201 - 5660 192nd St.Surrey, BC V3S 2V7CanadaPh: 604.606.5800Toll Free: 866.773.6926 Fax: 604.574.3827www.dowco.comFounded in 1970, Dowco is one of the largest fully automated detailing com-panies in the world (200 staff, six office locations) and is recognized as one of the leading steel detailers in North America. With a proven track record of exceptional 3D detailing, Dowco provides the high-est quality of detailing services to local, regional, national, and international construction and engineering markets. Techniques in steel detailing have changed dramatically over the past decades. Dowco’s ability to recognize change and embrace new technologies sets it apart from its competitors and allows it to grow at an unprecedented rate in the industry.

APRIL 2007 MODERN STEEL CONSTRUCTION

2007 exhibitors nascc: the steel conference EiGEN Technical Services Private Ltd.Booth 6415th floor, Tower (B), Vatika Atrium, Sector - 53Golf Course Sector RoadGurgaon, Haryana State 122001IndiaPh: 91.124.4017470Fax: 1.64.63653291www.eigen-tech.comEiGEN is a one of leaders in providing remote-based technical and commercial services to the global construction industry. Our core competence is in developing a concept design into an integrated detailed design and in providing documentation ready for use in construction integrated with technological and commercial support services. We are one of the largest companies in our field of work, with clients in the UK, Middle East, Australia, and the U.S. We are a company having unique capabilities of delivering complete range of services in an integrated fashion under one roof.

ESAB Welding & Cutting ProductsBooth 622411 S. Ebenezer Rd.Florence, SC 29501Ph: 843.669.4411Toll Free: 800.ESAB.123Fax: 843.664.4258www.esabna.comWith more than 100 years of experience, ESAB offers the equip-ment, filler metals, technical support, and global resources to provide complete solutions for your welding and cutting needs. For the bridge and steel fabrication industry, combine Coreshield self-shielded flux core wire with an ESAB 653cvcc power source and a Mobilemaster wire feeder for a hardworking, reliable package. Time after time, weld after weld, ESAB brings you products that meet your precise specifi-cations. Great things happen when you put us to work.

Fabreeka International, Inc.Booth 942PO Box 2101023 Turnpike St.Stoughton, MA 02072Ph: 781.341.3655Toll Free: 800.322.7352Fax: 781.341.3983www.fabreeka.comFabreeka’s experience in vibration control includes the dynamic response of steel fabrications and support structures. Ser-vices include measuring building floor vibration, displacement response of floors/mezzanines, and modeling of structures to predict performance. Fabreeka’s capabilities include NASTRAN and finite element analysis programs to analyze the static and dynamic conditions of our customers’ vibration problems.

FabSuite, LLCBooth 449PO Box 53666704 Tarpley’s Tavern RdWilliamsburg, VA 23188, VA 23188Ph: 757.645.0842Fax: 757.645.0896www.fabsuite.comFabSuite is an affordable, user-friendly collection of fabrication management software programs that includes: estimating, combin-ing (multing and nesting), inventory, production control, purchas-ing, project management, and order entry. FabSuite can benefit the small shop that needs a once-entered-many-uses approach to data management, as well as the large operation that wants to monitor multiple shop floor transactions using a built-in bar-cod-ing interface with P2Programs. FabSuite programs can be used individually or as a fully integrated software solution.

FabTrol Systems, Inc.Booth 418132 E. Broadway, Suite 636Eugene, OR 97401Ph: 541.485.4719Fax: 541.485.4302www.fabtrol.comFabTrol MRP is the global leader in steel fabrication manage-ment software. With integrated estimating, drawing management, material management, production control, and shipping, FabTrol MRP automates the steel fabrication process. FabTrol MRP was designed by steel fabricators for steel fabricators, and is proven to help increase revenues, reduce costs, improve quality, and shorten project schedules.

Fastenal CompanyBooth 9332001 Theurer Blvd.Winona, MN 55987Ph: 507.454.5374Fax: 507.453.8049www.fastenal.comFastenal is America’s largest fastener distributor and fastest growing full-line industrial supply distributor. With 750,000 top-line industrial and construction products, a spectrum of industrial services, and 2,000 stores staffed by helpful, knowledgeable prod-uct specialists, we’re going beyond the call to be your best local supplier—everywhere you do business. Visit www.fastenal.com to order online and locate your nearby store. We get it right!

Ficep CorporationBooth 10312301 Industrial CourtForest Hill Industrial Air ParkForest Hill, MD 21050Ph: 410.588.5800Fax: 410.588.5900www.ficepcorp.comFicep Corporation of Forest Hill, Maryland currently provides 65 different CNC systems for the fabrication of structural steel and plate. The product line range encompasses such operations as sawing, shearing, drilling, punching, oxy-fuel, and plasma cutting systems. Ficep, a truly worldwide firm with 11 operations, cur-rently has manufacturing facilities that surpass 1,000,000 sq. ft and is in the process of expanding its facilities by an additional 300,000 sq. ft.

Fisher & LudlowBooth 8248059 Dixie Hwy.Florence, KY 41042Ph: 859.282.7767Toll Free: 800.334.2047Fax: 859.282.7702www.fisherludlow.comFor TruWeld bar grating, grip span safety grating, Shur Grip safety grating, or expanded metal, Fisher & Ludlow is your full line sup-plier. Our 11 locations are located coast to coast and provide fast service for standard panels or fabricated products. Full in-house service from grating engineering to custom fabrication.

G.W.Y., Inc.Booth 248217 Forest Rd.PO Box 293Greenfield, NH 03047Ph: 603.547.3800Toll Free: 888.838.6500Fax: 603.547.3801www.gwyinc.comG.W.Y., Inc. is celebrating more than 30 years of distributing instal-lation tools for structural bolting. We have a full line of installation wrenches for both TC Bolts and standard structural bolts. Like the TC wrenches, G.W.Y.’s installation wrenches for heavy hex head structural bolts are constant speed electric tools. Be sure to stop by booth #248 for a demonstration of our new Turn of Nut installa-tion wrenches. In addition to new wrench sales, G.W.Y. also rents installation tools. Our extensive spare parts inventory enables us to provide same-day service for most tool repairs.

Gaule DetailingBooth 319103 N. Elm St.PO Box 35Creston, IA 50801Ph: 641.352.5334Fax: 641.352.5335www.gauledetailing.comGaule Detailing has served the steel industry since 1981. Our staff of seven is known for quality and service. We take great pride in our reputation. To serve you better, we are training eleven detailers to begin employment in August. We can detail all of your project, structural and miscellaneous. Projects we prefer will have a good structural frame. We can convert the engineer’s model into our software and get a head start on your project.

Genesis Quality Systems, Inc.Booth 848100 Engelwood Dr., Suite FOrion, MI 48359Ph: 248.377.1788Fax: 248.377.4588www.genesisqs.comGQS currently provides detailing management, project quality management, pre-construction, and construction services and develops process management systems for many clients in the steel industry. Our clients include accreditation bodies, code pro-viders, construction managers, general contractors, engineers, fabricators and inspection agencies.

Girder-Slab Technologies, LLCBooth 330PO Box 41261256 Marlkress Rd.Cherry Hill, NJ 08034Ph: 856.424.7880Toll Free: 888.478.1100Fax: 856.424.6880www.girder-slab.comRecipient of the 2007 AISC Special Achievement Award, Girder-Slab Technologies, LLC has continued to make great strides in bringing the Girder-Slab System to the multi-story residen-tial market throughout all of North America. This technology is offered only through steel contractors and is ideal for design-build. The steel contractor should think of this as their system, and Girder-Slab Technologies as their national representative, supplying everything needed to promote the system, while con-tinuously educating more architects, engineers, and owners about Girder-Slab each day.

Graitec, Inc.Booth 7431695 Laval Blvd. Suite 200Laval, QC H7S-2M2CanadaPh: Toll free sales 877.464.3366Toll Free: 877.464.5046Fax: 450.628.0400www.graitec.comGraitec is worldwide one of the largest developers of structural construction software. Advance - Steel is used by design profes-sionals, detailing offices, and steel construction companies that require a comprehensive and completely integrated package in AutoCAD. Advance is a high end yet user friendly affordable 3D solution that automates the entire design process (engineering, detailing and erection drawings, various reports, etc.) and pro-duces NC fabrication drawings and code in AutoCAD.

Grating Fasteners, Inc.Booth 2392332 Pailet Ave.Harvey, LA 70058Ph: 504.361.3471Toll Free: 800.227.9013Fax: 504.362.9059www.gclips.comG-Clip Grating Fasteners are a family of devices designed to reduced the cost of fastening grating. Each model features the unique ability to fasten grating to a structural member without the need for power tools of any kind. Simple hand tools are used by one person, unassisted and always working above the grat-ing surface. Special materials of certain models offer excellent resistance to corrosive environments.

Group CADmaxBooth 9488953, Robert Armour, Suite 201Montreal, QC H1E 6J7CanadaPh: 514.323.0713Toll Free: 877.477.0713Fax: 514.323.9091www.groupecadmax.comGroup CADmax is second to none in consulting and shop detail-ing services for miscellaneous, ornamental, and architectural metal works in North America. An experienced team of draft-spersons, checkers, and designers is at your service to provide high-quality shop drawings at reasonable costs, always delivered according to your schedule. Please visit our sales representative in Booth 948 and find out how we can assist your team and/or add to your present external detailing force.

MODERN STEEL CONSTRUCTION APRIL 2007

nascc: the steel conference 2007 exhibitorsHaydon Bolts, Inc.Booth 7221181 Unity St.Philadelphia, PA 19124Ph: 215.537.8700Fax: 215.537.5569www.haydonbolts.comHaydon Bolts, Inc. is a 141-year-old leading manufacturer and distributor of all kinds of structural bolts and electric tools to the heavy steel and concrete construction industries. Haydon also manufacturers large diameter (5/8 to 2-1/2) hot forged headed bolts of all grades, as well as bent anchor rods and rod and plate anchors. Haydon operates out of its 40,000-sq.-ft manufacturing and distribution facility in Philadelphia. Haydon is a charter mem-ber of the Industrial Fastener Institute (IFI), the trade organization of the leading fastener manufacturers in North America, as well as an associate member of AISC.

Hillsdale Fabricators Booth 8412150 Kienlen Ave.St. Louis, MO 63121Ph: 314.553.8205Toll Free: 800.261.2611Fax: 314.553.8215www.alberici.com

Hillsdale Fabricators is a full-service structural steel fabricator offering complete services from detailing through erection. Our main bay has a lifting capacity of 60 tons, which enables us to fabricate heavy and complex members. In addition to offering ACSE certified erection, Hillsdale specializes in high-performance paint systems, which are applied in our 40,000-sq.-ft multi-zone, environmentally controlled paint shop. Hillsdale’s expertise is fur-ther enhanced by our financial strength, our unrestricted bonding ability, and our reputation for unflinching dependability.

Hilti, Inc.Booth 7135400 S. 122nd E. Ave.Tulsa, OK 74146Toll Free: 800.879.8000www.us.hilti.comHilti is a world-leading manufacturer and supplier of quality, innovative, and specialized tools and fastening systems for the professional user. With more than 800 highly trained Hilti account managers and engineers throughout North America and an addi-tional 1,300 Hilti employees nationwide, Hilti product lines, such as powder-actuated fastening, drilling and demolition, diamond coring and cutting, measuring, firestopping, screw fastening, adhesive and mechanical anchoring, and strut and hanger sys-tems, help steel fabricators and erectors increase their produc-tivity.

Hodell-Natco Industries, Inc.Booth 2157220 Golden Gate Dr. - Suite 100Houston, TX 77041Ph: 713.856.6800Toll Free: 800.275.2658Fax: 713.856.6849www.hodell-natco.comFor more than 120 years Hodell Natco Industries has serviced the fastener and chain industries. We have eight strategically located warehouses that encompass over 500,000 sq. ft of space. We specialize in A325/A490 structural bolts, but also offer a full assortment of construction related fasteners. Our diverse inventory consists of a complete line of hot-dip galvanized mech galv and zinc plated fasteners with same day delivery. All of our products are available in both import and domestic material, with complete mill test reports available.

Holtec Consulting Private Ltd.Booth 342Holtec Center, A Block, Sushant LokGurgaon, Haryana 122001IndiaPh: 91.124.2385095Fax: 91.124.2385114www.holtecnet.comHoltec is an ISO-9001 certified engineering and detailing com-pany with more than 450 professionals. From its main engineering center in India, it offers a wide range of services in civil/structural, mechanical, electrical engineering and detailing to its customers, who are located in more than 65 countries. Its structural steel detailing group uses Tekla Structures, SDS/2 and AutoCAD to cost-efficiently detail projects ranging from 20 to 30,000 tons for leading U.S. and Canadian fabricator clients.

Hougen Manufacturing, Inc.Booth 6123001 Hougen Dr.Swartz Creek, MI 48473Ph: 810.635.7111Fax: 810.635.8277www.hougen.comHougen portable magnetic drills and Rotabroach annular cutters bring the drill to the work site. 14 models provide the capacity to drill holes from 7/16 up to 3-1/16 diameter and as deep as 3. Also, sheet metal hole cutters cut clean, round holes without tearing or deforming the surrounding material.

Industrial Galvanizers AmericaBooth 8373535 Halifax Rd.Petersburg, VA 23805Ph: 804.733.0808Fax: 804.733.2274www.ig-usa.netIndustrial Galvanizers America (IGA) is a supplier of high-quality hot-dip galvanizing. IGA has five plants con-veniently located throughout the southeastern U.S. Your steel is galvanized according to the IGCMS, IG America’s own compli-ance management system, based on three international stan-dards. Visit us on the web at www.ig-usa.net for more informa-

tion about IGA, your best choice for high quality galvanizing, fast turn times, and responsive cus-tomer service.

InfascoBooth 212700 OulletteMarieville, QC J3M 1P6CanadaPh: 450.658.8741Fax: 450.447.0114www.infasco.comInfasco’s 1,000,000-sq.-ft manufacturing facility is one of the fas-tener industry’s largest manufacturing plants under one roof. It operates around the clock, filling orders from distributors around the world. Infasco manufactures a variety of fasteners, including hex head cap screws in Grades 2, 5, and 8, as well as structural fasteners including A325, A490, F1852 tension control bolts, and heavy hex structural nuts.

InfoSight CorporationBooth 61420700 U.S. Hwy. 23PO Box 5000Chillicothe, OH 45601Ph: 740.642.3600Fax: 740.642.5001www.infosight.comInfoSight provides solutions with their tags, products, and sys-tems for online, automatic product marking along with manual identification for various industries including steel, fabricators, galvanizers, power plants, automotive, etc. Reliable identification of products through company processes is essential. InfoSight has an unique tagging system that survives hot-dip galvanizing.

Infra-Metals Co.Booth 10244501 Curtis Ave.Baltimore, MD 21225Toll Free: 800.235.3979Fax: 410.355.9395www.infra-metals.comInfra-Metals Co. is a full-service carbon steel service center with locations in Wallingford, CT, Marsailles, IL, Petersburg, VA, Tampa, FL, Hallandale, FL, and a sales office in Langhorne, PA. Infra-Met-als stocks a wide range of beams, tube, channels, carbon plate in various grades, and all mini-mill products. Processing capabili-ties include burning machines—both Oxy and Plasma—saws with capacity to 44, and cambering and straightening capabilities. For more information, contact the location nearest you.

International Paint LLCBooth 7126001 Antoine Dr.Houston, TX 77091Ph: 713.682.1711Fax: 713.684.1514www.international-pc.comInternational Paint LLC is a leading global provider of high-per-formance coatings products for more than 25 years. International Paint offers an extensive range of high performance coatings for the oil, gas, chemical processing, power, paper and pulp, rail, steel structure, mining, and marine industries.

Intsel Steel Distributors/R&S Steel/Alta-Steelco:divisions of Triple-S Steel Supply Co.Booth 52311310 W. Little YorkHouston, TX 77041Ph: 713.937.9500Toll Free: 800.762.3316Fax: 713.937.1091www.intselsteel.comIntsel Steel Distributors, R&S Steel, Alta-Steelco and their parent company, Triple S Steel, are committed to the steel industry in providing the range and grades of material from stock to facilitate your immediate and long-term requirements. Offering expertise from years of service, our employees accept the challenge to compete in the ever-changing world dynamic. Stocking over 150,000 tons in a full range of structurals, plate, and tubing, our processing services including flame-cutting, saw-cutting, blasting and painting, bending, forming, slitting, edge-conditioning, plate-punching and leveling. Our 600 dedicated staff serve customers in the U.S. and around the world from plants located in Texas, Colorado, Utah, and Tennessee.

Ironworker Management Progressive Action Cooperative Trust (IMPACT)Booth 2381750 New York Ave. N.W., LobbyWashington, D.C. 20006Ph: 202.393.1147Toll Free: 800.545.4921Fax: 202.393.1507www.impact-net.orgA Labor-Management Taft Hartley Trust, whose primary mission is to expand job opportunities for union Ironworkers and their signatory contractors through progressive and innovative labor management cooperative programs.

J. B. Long, Inc.Booth 625110 W. Arch St., Suite 214Fleetwood, PA 19522Ph: 610.944.8840Fax: 610.944.0789www.jblong.comJ. B. Long, Inc. has supplied structural steel and miscellaneous iron details to the fabrication industry for more than 20 years. The firm is certified under the NISD (QPP) Quality Procedures Program. All those qualified of the total staff of 25 are certified under the NISD (IDC) Individual Detailer Certification program. J. B. Long, Inc. uses SteelLogic and Tekla (Xsteel) to create details. The focus is on small to mid-sized structural and miscellaneous iron projects.

APRIL 2007 MODERN STEEL CONSTRUCTION

2007 exhibitors nascc: the steel conference Jobber Instruments Calculator Co.Booth 220PO Box 5618Sevierville, TN 37864Ph: 865.428.6517Toll Free: 800.635.1339Fax: 865.453.0202www.jobbercalculator.comOur contribution to the steel fabricating industry for 25 years has been to develop calculators that meet their special needs. Our latest model is the Jobber 6, which is the most advanced and easy-to-use dimensional calculator ever developed. It is filled with programs for automatically solving almost any math problem. Its value has been attested to by thousands of loyal users. These include detailers, CAD users, checkers, estimators, engineers, and even shop personnel. Once you use a Jobber, you won’t be able to do without it.

KIP AmericaBooth 91839575 13 Mile Rd.Novi, MI 48377Toll Free: 800.252.6793www.kipamerica.comThe leading innovator in wide-format printing and image capture technology. KIP is a major provider of wide-format digital solutions for the architectural, engineering and manufac-turing industries—solutions that deliver efficient, dependable, consistently high-quality performance. Discover award-winning KIP imaging technologies, designed to enhance the operations of all KIP digital copiers, printers, and scanners. Patented KIP pro-cesses enhance the quality of wide-format document production, while decreasing operator effort and overall ownership costs.

Kubes Steel, Inc.Booth 823930 Arvin Ave.Stoney Creek, ON L8E 5Y8CanadaToll Free: 877.327.8357Fax: 905.643.4003www.kubesteel.comThere is no better measure of your company’s success than the success being experienced by your customers. Kubes Steel, Inc. is proud of the service we offer to the steel fabrication indus-try as Canada’s premier provider of structural, section rolling, forming, and prefabrication services. We offer Canada’s largest multi-section roll and specialized section bending capacity, which is among the best in North America. Visit us at Booth 825 for complete information.

LeJeune Bolt Co.Booth 4453500 W. Hwy. 13Burnsville, MN 55337Toll Free: 800.872.2658Fax: 952.890.3544www.lejeunebolt.comGet Exactly What You Need. Our inventory is the most compre-hensive in the industry, ensuring high fill rates for orders of any size. When You Need It. We provide same-day shipment from multiple locations, with custom packaging and electronic certi-fications. With Complete Satisfaction. We are a key supplier to some of the most recognizable and significant projects in the world. Our lines include structural fasteners, tools and equip-ment, anchors/threaded rod, stud welding products/equipment, and industrial/OEM fasteners.

Lincoln ElectricBooth 92122801 St. Clair Ave.Cleveland, OH 44117Ph: 216.481.8100Fax: 216.486.1751www.lincolnelectric.comThe Lincoln Electric Company of Cleveland, Ohio is the world leader in the design and manufacture of arc-welding equipment and consumables, robotic welding systems, plasma, and oxyfuel cutting equipment.

Lincoln Structural BoltBooth 3395600 N. 58th Court, #2Lincoln, NE 68507Ph: 402.464.4433Toll Free: 800.571.6884Fax: 402.464.4855www.lincbolt.comLincoln Structural Bolt is an ISO 9001:2000-registered distribu-tor of structural fasteners including ASTM bolt standards A307, A325, A325M, A449, and A490. We stock grade A563 DH, DH3, C, C3, and A194 2H nuts; F844, F436 Types 1 & 3, beveled and load indicating washers; tension control bolts, metric product, expansion anchors, and all thread rod. Full certifications and rotational capacity tests are offered at no cost. Custom labeling provided to customer specification.

Lindapter North America, Inc.Booth 6203924A Varsity Dr.Ann Arbor, MI 48108Ph: 734.677.2305Toll Free: 888.724.2323Fax: 734.677.2339www.lindapterna.comLindapter’s world leading, pre-engineered, steel connection products are designed for connecting secondary steel to primary steel, blind connections to steel tube or plate, floor connections for steel plate and grating, and flange clamps. Site drilling and welding are eliminated, which reduces installation cost. 70 years of experience developing technically innovative products for steel connection. Free design engineering and consultation.

Lohr Structural Fasteners, Inc.Booth 6172355 Wilson Rd.Humble, TX 77396Ph: 281.446.6766Fax: 281.446.7805www.lohrfasteners.comStop by Lohr Fasteners booth and see the patented Lohr SMAR-THEX TC, the Thick Washer Face 1-1/8 A490 SMARTHEX, and our newest product, the Lohr Hex Traceables—all with our exclu-sive Head ID Code. At Lohr, we are committed to total customer support. Let our experienced staff help ensure that your next proj-ect goes smoothly. Look for the motorcycles and stop by to see why Lohr Fasteners is the leader in tension control fasteners.

LS IndustriesBooth 714710 E 17th St.Wichita, KS 67214Ph: 316 265.7997Toll Free: 800 835.0218Fax: 316 265.0013www.lsindustries.comLS Industries offers engineering, design, and manufacturing of

blast cleaning equipment. Working with you and your engineers, LS can provide innovative solutions that meet your cleaning requirements and integrate well with your manufacturing sys-tems. Quality combined with craftsmanship makes LS Indus-tries a leader in blast cleaning manufacturing. Our blasters are low-maintenance, long-lasting, and cost-efficient to operate. An extensive parts department is our commitment to the customer. LS Industries: an innovator and leading manufacturer of metal cleaning, profiling, surface preparation, material handling, and finishing equipment.

LTC, Inc.Booth 448817 Bainbridge St.P.O. Box 577La Crosse, WI 54602Ph: 608.784.2300Fax: 608.785.2003www.ltcsteeldetailers.comLTC, Inc. is an innovative, progressive structural steel detailing company that has provided quality shop drawings to the fabrica-tion industry since 1985. Our current staff of 15 detailers pre-pares shop drawings for commercial projects including hospitals, high-rise structures, multi-story office buildings, schools, airports,

churches, and industrial buildings. We offer electronic data for fully automated shops including kiss, CNC, DXF, and plate dupli-cator files. Stop by Booth 448 for more information or to discuss your next project.

LUSASBooth 839230 Park Ave., Suite 864New York, NY 10169Ph: 212.295.2197Toll Free: 800.97.LUSASFax: 212.295.2121www.lusas.comLUSAS provides finite element analysis software for accurate and cost-effective design of steel bridges and other structures. Fundamental frequency, seismic, dynamic, nonlinear, buckling, fatigue, staged construction, and curved girder analysis can all be undertaken. AASHTO and other design codes are supported. Vehicle-load optimization facilities provide worst-case loading patterns. Loading is mesh-independent. Extensive results pro-cessing facilities include smart load combinations, mesh-inde-pendent slice sectioning of results, a report wizard, comprehen-sive graphing, contouring and animation facilities.

M.D. Bowers, Inc.Booth 749

Mazak Optonics CorporationBooth 913140 E. State Pkwy.Schaumburg, IL 60173Ph: 847.252.4500Fax: 847.252.4599www.mazaklaser.comMazak Optonics Corporation manufactures and distributes 5-axis tube and pipe lasers with automation. Visit our booth to see how we have utilized our expertise in this field to develop a unique, new, and patented method of producing laser-cut space frame truss and support column components. The first utilization comes at Mazak’s own International Technology Center. Mazak’s method provides exceptional face-to-face component strength and squareness, saves fabrication and erection lead times, while reducing labor skill levels.

McCann Equipment Ltd./Eastern Pneumatics & Hydraulics, Inc.Booth 548

Metal Dek Group, a unit of CSiBooth 812650 Rosewood Dr.Columbia, SC 29201Ph: 803.251.5003Fax: 803.799.6811www.metaldek.comThe Metal Dek Group, a unit of CSi, offers steel floor and roof decks for structural, aesthetic, and acoustical applications. Its facilities are strategically located in: Columbia, SC; Memphis, TN; Dallas, TX; and Phoenix, AZ. The company serves both the design community and construction companies with engineering, project management, and logistical services. Its state of the art website, www.metaldek.com, has now been enhanced to offer 24/7 design, project management and real-time project information.

Metals USABooth 42450 Cabot Blvd.Langhorne, PA 19047Ph: 267.580.2100Toll Free: 800.523.3340Fax: 267.580.2121www.metalsusa.comMetals USA inventories, processes and distributes structural steel products throughout the U.S. Material Grades supplied include ASTM A992, ASTM A572, ASTM A588, ASTM A500, and ASTM A36. Our inventories of shapes, bars, plates and hollow structural members are commonly used in building and bridge applications. Services include cutting to length, tee splitting, cam-bering, forming, connection materials, and project management. Metals USA inventories, combined with tailored services and know-how, provide steel fabricators with supply solutions sup-porting schedule requirements.

MODERN STEEL CONSTRUCTION APRIL 2007

nascc: the steel conference 2007 exhibitorsMi-Jack Products, Inc.Booth 10483111 West 167th St.Hazel Crest, 60429Ph: 708.596.5200Fax: 708.225.2312www.mi-jack.comMi-Jack Products has been a leader in providing quality lift equip-ment with unsurpassed service. Choose from a complete line of mast packers, reach stackers, and rubber-tired gantry cranes for a variety of applications with capacities to meet your specific needs. Regardless of your lifting requirements, Mi-Jack has the solution.

Moldtek Technologies Ltd.Booth 9224th Floor, White HouseKundanbagh, BegumpetHyderabad 500 016IndiaPh: 91.40.23412826Fax: 91.40.23412918www.moldtekindia.comMoldtek made a synergetic acquisition of an American steel detailing firm to ensure that U.S. fabricators and builders get American quality detailing at Indian prices. We provide structural steel and miscellaneous detailing using Tekla (Xsteel) and SDS2. We have more than 200 experienced detailers in AISC/NISD standards.

Morgan Quality Products Booth 72610025 Hwy. BBHillsboro, MO 63050Ph: 314.540.1717Visit Booth 726 for the premier showing of our new innovative beam/purlin-hanging system.

National Institute of Steel Detailing (NISD)Booth 2347700 Edgewater Dr., Suite 670Oakland, CA 99621-3022Ph: 510.568.3741Fax: 510.568.3781www.nisd.orgThe National Institute of Steel Detailing (NISD) is an international association that advocates, promotes, and serves the interests of the steel detailing industry. The object of the Institute’s programs and documents is to improve detailers’ knowledge, verify their skills, and qualify their ability to manage properly detailed proj-ects, as well as open a window to the world for its members.

National Steel Bridge AllianceBooth 2571 E. Wacker Dr., Suite 700Chicago, IL 60601Ph: 606.724.2347Fax: 606.724.1524www.steelbridges.orgThe National Steel Bridge Alliance is a non-profit alliance of companies and individuals who are dedicated to devel-oping and promoting the best in steel bridge design and construction.

National Steel Constructors, LLCBooth 35114650 Jib St.Plymouth, MI 48170Ph: 734.459.9515Toll Free: 800.373.2867Fax: 734.459.9543www.nationalsteelconstructors.com

National Steel Constructors is a premier nationwide steel and ductwork erection, rigging, and machinery installation company. Along with our Steel City Erecting Division, we specialize in the erection of structural steel for power blocks, FGDS, SCRS, and all your associated steel needs. With a long resume of success-fully completed construction projects, we look forward to an opportunity to be of service.

NCSEA/STRUCTURE magazine/SECBBooth 618645 N. Michigan Ave., Suite 540Chicago, IL 60611Ph: 312.649.4600Fax: 312.649.5840www.ncsea.com; www.structuremag.org; secertboard.org NCSEA advances the practice of structural engineering and, as the national voice for practicing structural engineers, protects the public’s right to safe, sustainable, and cost-effective build-ings, bridges, and other structures. NCSEA owns and distributes STRUCTURE magazine, which is a joint publication of NCSEA, SEI, and CASE, and has a circulation of 32,000 structural engi-neers. NCSEA also endorses, promotes, and provides adminis-trative and other services for the Structural Engineering Certifica-tion Board (SECB).

Nelson Stud Welding, Inc.Booth 9357900 W. Ridge Rd.Elyria, OH 44036Ph: 440.329.0400Toll Free: 800.635.9353Fax: 440.329.0492www.nelsonstudwelding.comNelson offers new, extra-long, cold-formed shear connector and anchor studs meeting AWS, AISC, and ASSHTO specifications. They eliminate more expensive alternatives such as piggyback-ing or using expensive, hot-forged studs. Nelson also will demon-strate the Nelweld stud welding system. The system can monitor and/or adjust more than 30 welding parameter for the highest quality and most reliable stud welds available. The unique moni-toring process will also be demonstrated, assuring a quality weld every time, with complete traceability of all welds on a project.

New Millennium Building SystemsBooth 332Butler, INLake City, FLSalem, VAContinental, OH Florence, SCPh: 260.868.6000Fax: 260.868.6002www.newmill.comFirst-rate steel joist and deck products are not the only consider-ation when choosing a supplier. In fact, lots of companies make quality products, but the overall service to you is New Millenni-um’s number one priority. We have five plant locations to facilitate your needs along with many years of combined work experience. Timely quotes, on-time deliveries, astute professional engineer-ing support, inspired logistics, and resourceful problem-solving at all levels are attributes we possess for successful business partnerships.

Nitto Kohki USA, Inc.Booth 9314525 Turnberry Dr.Hanover Park, IL 60133Ph: 630.924.9393Toll Free: 800.323.8828Fax: 630.924.0303www.nittokohki.comNitto Kohki is a leading manufacturer of automatic-feed magnetic base drills that use self-regulated feed systems to optimize cutting performance with a number of safety features. Using Jetbroach carbide-tipped annular cutters can significantly increase pro-duction while reducing labor hours and hazardous work. Please visit our booth for a complete demonstration. We also manufac-ture many other steel working tools including portable hydraulic punches, bevellers, and pneumatic and electric power tools.

North American Galvanizing CompanyBooth 2255314 S. Yale Blvd., Suite 1000Tulsa, OK 74135Ph: 918.488.9420Fax: 918.488.8172www.nagalv.com

North American Galvanizing Company is a leading provider of coating for corrosion protection and currently conducts its galva-nizing and coating business through a network of plants located in Canton, Denver, Houston, Hurst, Kansas City, Nashville, St. Louis, Louisville, and Tulsa. Hot-dip galvanizing provides metal corrosion protection for many product applications used in com-mercial, construction, and industrial markets. NAGC is headquar-tered in Tulsa, Oklahoma.

Nucor - Vulcraft GroupBooth 513PO Box 186Grapeland, TX 75844Ph: 936.687.4665Fax: 936.687.4290www.vulcraft.comSteel joists, joist girders, composite floor joists, special profile steel joists, and floor and roof deck. Vulcraft facilities are located in South Carolina, Nebraska, Alabama, Texas, Indiana, Utah, and New York.

Nucor CorporationBooth 5131915 Rexford Rd.Charlotte, NC 28211Ph: 704.366.7000Fax: 704.362.4208www.nucor.comNucor has operating facilities in 19 states. Products include carbon and alloy steel bars, beams, sheet and plate; steel joists and joist girders; steel deck; cold finished steel; steel fasteners; metal building systems; and light gauge steel framing. Nucor is the nation’s largest recycler.

Nucor Fastener - IndianaBooth 513PO Box 61006730 County Road 60St. Joe, IN 46785Ph: 260.337.1600Toll Free: 800.955.6826Fax: 260.337.1726www.nucor-fastener.comManufacturer of 100% made in USA carbon and alloy steel hex head cap screws, heavy hex structural bolts, dome head Tru-Tension tension control assemblies, nuts, and build-to-print spe-cials in inch and metric sizes in various grades, with finishes and thread coatings to meet fastening requirements.

Nucor-Yamato Steel CompanyBooth 513PO Box 1228Blytheville, AR 72316-1228Ph: 870.762.5500Toll Free: 800.289.6977Fax: 870.763.9107www.nucoryamato.com

Steel manufacturer of wide flange structural steel shapes, H-piles, sheet piling, angles, channels, and car building shapes. Grades include ASTM A36, ASTM A572, ASTM A588, ASTM A690, ASTM A709, and ASTM A992.

Ocean Machinery Booth 12126720 N.W. 15th WayFort Lauderdale, FL 33309Ph: 954 956 3131Toll Free: 800 286 3624Fax: 954 956 3199www.oceanmachinery.comOcean Machinery specializes in maximizing the profitability of small-to-medium structural steel fabricators using CNC machin-ery, including the Ocean Avenger Beam Drill Line, the worlds fastest selling beam line with more than 250 installations world-wide. Similar machines include the Ocean Liberator CNC Cop-ing machine, the Ocean Terminator band saw range and the all new Ocean Clipper CNC Angle line for processing clip angles. Ocean Machinery your one-stop shop for all your structural steel fabricating needs.

APRIL 2007 MODERN STEEL CONSTRUCTION

2007 exhibitors nascc: the steel conference Omnitech Associates, Inc.Booth 334PO Box 20792Oakland, CA 94620Ph: 510.658.8328Toll Free: 888.8DESCONFax: 510.595.0373www.desconplus.comOmnitech Associates develops connection design software DesconWin and DesconBrace. DesconWin designs beam and column splices, shear and moment connections to column flange, column web, girder, and HSS columns. DesconBrace designs diagonal, chevron, K, and knee brace connections. ASD and LRFD versions of both programs have been updated for AISC 2005 Specification and are available in U.S. customary and metric units. Both programs generate detailed calculation reports, drawings, and DXF files.

P2 ProgramsBooth 444PO Box 1000Dripping Springs, TX 78620Ph: 512.858.2007Toll Free: 800.563.6737Fax: 512.858.2008www.p2programs.comP2 Programs continues to set the industry standard when it comes to bar coding your structural steel. With over 20 years experience using Auto-ID technology to improve shop floor track-ing, shipping and inventory control, P2 Programs is the company with the knowledge you should look to for answers. With our core products, industry contacts and hardware suppliers, you could not make a better decision than to call us first!

Paramount Roll & Forming, Inc.Booth 84912120 E. Florence Ave.Santa Fe Springs, CA 90670Ph: 562.944.6151Fax: 562.941.8102www.paramount-roll.com

Since 1963, Para-mount Roll and Forming has been in the business of bending steel and other metal. We pro-vide structural steel rolling, forming, and

bending for aerospace, architectural, industrial, transportation, and commercial uses. We bend tubes, pipes, channels, beams, tracks, and railings.

PDM Steel Service Centers, Inc.Booth 652PO Box 310Stockton, CA 95201Ph: 209.943.0555Toll Free: 800.800.4736Fax: 209.943.1606www.pdmsteel.comHeavy carbon, structural service center. Locations in Stockton, Fresno, and Santa Clara, California; Sparks and Las Vegas, Nevada; Woodland, Washington; and Spanish Fork, Utah.

Peddinghaus CorporationBooth 1013300 North Washington Ave.Bradley, IL 60915Ph: 815.937.3800Fax: 815.937.4003www.peddinghaus.com

Peddinghaus Corporation, with corporate headquarters in Brad-ley, IL, is the acknowledged leader in providing technologically advanced equipment for the fabrication of structural steel and heavy plate for the steel construction industry. By focusing on technologies to increase fabrication shop productivity, Ped-dinghaus is instrumental in meeting construction deadlines for

its users. Peddinghaus employs the technolo-gies of carbide drill-ing, high performance plasma cutting, band saw speed cutting, superior punching, and shearing to enhance operation on the shop floor level. Dedicated to the industry, Peddinghaus has introduced eight new products in the past 18 months to assist our users.

Peterson Beckner Industries, Inc.Booth 6131310 Spears RoadHouston, TX 77024Ph: 281.872.7722Fax: 281.716.4750www.petersonbeckner.comPeterson Beckner Industries, Inc. is a national structural steel erector with corporate offices in Houston, Texas. We pursue large industrial, commercial, and institutional projects throughout the United States and the Caribbean. We are recognized by the AISC as a Certified Advanced Steel Erector and have developed and implemented an award-winning safety program. We have the financial strength and the technical expertise to be your steel erector of choice.

PieresearchBooth 244501 E. Main St.Arlington, TX 76016Ph: 817.265.0980Toll Free: 800.342.2409Fax: 817.275.2335www.pieresearch.comThe sole purpose of our products—Centraligner pier sleds and Hijacker pier bolsters—is to keep a reinforcing steel cage centered and off of the floor of a drilled shaft to insure proper alignment and concrete cover in accordance with the engineer’s specification. Our products are made of 8,500 psi high strength grout so that they will not break, shatter, or come apart, and are secured to the cage with galvanized integrated tie wires. Because of their function, our products provide quality assurance and are thus potential contingent liability reducers.

PlanIT Design GroupBooth 2141589 E Western Reserve Rd.Poland, OH 44514Ph: 330.259.7882Fax: 330.259.7884www.planitdesign.com.auPlanIT Design Group is proud to count some of the USA’s larg-est and most prestigious steel fabricators among our clients. Our goal is to provide the most accurate shop drawings in a timely manner and with the highest degree of customer service, utilizing the latest in 3D modeling technology. We have proven our team work, commitment, ability and accuracy on numerous commer-cial, institutional, and industrial projects nationwide.

Pneutek, Inc.Booth 21317 Friars Dr.Hudson, NH 03051Ph: 603.883.1660Toll Free: 800.431.8665Fax: 603.882.9165www.pneutek.comPneutek is the established leader in the mechanical attachment of steel roof and floor decking. Traditional methods of attaching steel and roof deck are becoming obsolete. Pneutek’s revolu-tionary Air/Safe fastening method is changing the steel decking industry across the country. Pneutek’s patented Air/Safedesign is completely pneumatic and uses no explosives. It is safer, faster, and more reliable than dangerous power tools or traditional, inconsistent welding methods. Through its innovative tools and fasteners, Pneutek is dramatically improving the quality, safety, and costs of major construction projects across America.

Prothious Engineering ServicesBooth 7181839 Knoll Dr.Ventura, CA 93003Ph: 310.890.7284Fax: 775.796.3404www.prothious.comProthious Engineering Services is one of the largest and most successful detailing companies in the world. Prothious has sev-eral hundred engineers, detailers, and estimators, one of the most experienced and well-respected teams in the industry, and an annual detailing capacity of several hundred thousand tons. Our services include industrial duct, post-tension, CMU, masonry, pre-engineered building, precast, and prestressed detailing. We also provide services for estimation and connection design.

Quality Management Company, LLCBooth 4571 E. Wacker Dr., Suite 700Chicago, 60601Ph: 312.670.7520Fax: 312.670.9030www.QMConline.comQuality Management Company provides independent quality audits for the American Institute of Steel Construction’s Certifica-tion Program. With expertise in fabrication and/or erection, QMC auditors conduct rigorous examina-tions that evaluate a company’s qual-ity management system (rather than the specific prod-uct). This process provides specifying engineers with the assur-ance that an AISC Certified fabricator or erector incorporates the proper procedures, personnel, organization, experience, knowledge, equipment, capability, and commitment needed to successfully fabricate or erect their project.

Quebec Detailing ConnectionBooth 8312094 BeauregardLaval, QC H7T 2M9CanadaPh: 450.688.7336Toll Free: 866.677.6161Fax: 450.688.3289www.quebecconnection.comThe Quebec Detailing Connection: When time is of the essence, safety and quality are synonymous with flawless erection, and intelligent, no-nonsense detailing is needed. That’s when the power of 100 detailers using state-of-the-art Tekla Structures and SDS/2 makes the difference with details done the American way by experienced American detailers caring for your clients.

Quincy Joist Co.Booth 543520 S. Virginia St.Quincy, FL 32351Ph: 850.875.1075Toll Free: 800.277.1075Fax: 850.875.1277www.quincyjoist.comQuincy Joist Company is a leader in manufacturing open web steel joists, long spans, and joist girders, and is a member in good standing of the Steel Joist Institute. Quincy Joist Company is committed to excellence in customer service, quality products, value engineering, and adjusting deliveries to accommodate customer requirements. These attributes equate to value. It’s the combination of our state-of-the-art machinery and equipment coupled with our expert staff that is trained and experienced in every aspect of steel joist manufacturing, that gives us the com-petitive edge. Our engineering department is capable of handling the most mundane to the most complex structures with a reputa-tion that is second to none. We have multi-state operations pri-marily focused in the U. S. Sunbelt. You can visit us at www.quin-cyjoist.com or call us at (800) 277-1075 for further information.

MODERN STEEL CONSTRUCTION APRIL 2007

nascc: the steel conference 2007 exhibitorsQuindataBooth 617Dr. Torres Boonen 805Providencia, Santiago ChilePh: 56.2.5953200Fax: 56.2.5953299www.quindata.clQuindata is a steel detailing company with more than 20 years of experience in projects for different markets such as mining and metals, power, infrastructure, commercial, and many others. Our highly experienced staff and the latest steel detailing technology we work with, including SDS/2 and Xsteel software, allow us to guarantee the success of any project.

Radley CorporationBooth 2184595 Broadmoor SE, Suite 115Grand Rapids, MI 49512Ph: 616.554.9060Toll Free: 800.968.8208Fax: 616.554.9008www.radley.comRadley Corporation provides bar code and RFID data collection that enhance the ROI of your MRP investment. MRP users in the steel industry rely on Radley’s expertise to provide automa-tion and productivity to their daily operations. Radley makes it easier for steel fabricators to ship and track progress in real-time. Radley’s data collection is tightly integrated with FabTrol MRP.

Real Technology, LLCBooth 5422640 Fountainview Dr., Suite 126Houston, TX 77057Ph: 832.251.9400Fax: 713.456.2513www.realtechcad.netReal Technology provides high quality and cost-effective detail-ing services to structural and miscellaneous steel fabrication, engineering and construction firms. We use applications such as Xsteel (Tekla) and AutoCAD to facilitate accurate and timely delivery of detailed drawings. We are a customer-driven organi-zation that believes in going to great lengths to ensure customer satisfaction. Call us at our Houston office for a quote on your next project.

RISA TechnologiesBooth 73626632 Towne Center Dr., Suite 210Foothill Ranch, CA 92610Toll Free: 800.332.7472Fax: 949.951.5848www.risatech.com

RISA Technologies develops and sup-ports innovative structural analysis and design soft-ware. Our highly popular applica-tions enable struc-

tural engineers to more efficiently and productively conceptualize and design buildings, stadiums, bridges, tanks, towers, racks, conveyors, and most anything else. Static or dynamic, simple or complex, RISA Technologies has the answer. Please stop by our booth and let us show you what we can do for you!

RMM Global, LLCBooth 3432841 Riviera Dr., Suite 306Akron, OH 44333Ph: 330.867.4505Fax: 330.867.4506www.rmmglobal.comRMM Global, LLC is a provider of high-quality structural steel detailing services. We utilize SDS/2 and Xsteel to provide detail-ing services and have the ability to provide CNC downloads, KISS files, field bolt lists, and customized reports. Our detailing team has worked on industrial, commercial, high-rise, sports, and educational facilities. With a staff of more than 100 people RMM Global is in a position to cater to the client’s need for quick turnaround on projects.

Romac Computer ServicesBooth 724332 S. Main St.PO Box 660Lake City, TN 37769Ph: 865.426.9634Fax: 865.426.6454www.romacinc.comRomac Computer Services has been providing software solutions to the steel industry for the past 25 years. Steel specific applica-tions are available for estimating, production control, inventory control, purchasing, nesting/multing, and drawing management.

Ronstan Cable and Rod SystemsBooth 32345 High Point Ave., Suite 2Portsmouth, RI 02871Ph: 401.293.0539Fax: 401.293.0538www.ronstan.comRonstan manufactures cable and tie rod systems for structural architectural applications. Stainless steel and carbon systems up to 5” in diameter for cable and rod systems are available. All systems are pre-engineered and load rated. Innovative tamper-resistant cable rail designs are unique, preventing sagging cables and theft. Finished cable and rod systems are available for easy installation by your team. See www.ronstan.com or at NASCC Booth 323 in New Orleans.

SAFI Quality SoftwareBooth 4533393 Chemin St-FoyQuebec, QC GIX 1S7CanadaPh: 418.654.9454Toll Free: 800.810.9454Fax: 418.653.9475www.safi.comSince 1986, SAFI has been a truly integrated structural analysis and design program for buildings, bridges, transmission towers, electric sub-stations, and more. It is powered by state-of-the-art analysis, verification, design, and optimization techniques and equipped with the best graphical user interface of the market. The company is dedicated to the development of an integrated structural analysis, verification, and design package for the inter-national market

Saginaw Pipe Company, Inc.Booth 2451980 Hwy. 31PO Box 8Saginaw, 35137Ph: 205.664.3670Toll Free: 800.433.1374Fax: 205.664.3677www.saginawpipe.comSaginaw Pipe Company is one of the steel and pipe industry’s leading metal service centers. We have a 20-year history rich in growth and accomplishment. To strengthen and continue that tradition, our focus is on our primary asset: our customers. We are a major solution source of steel pipe, steel beams, steel tub-ing, and plate, offering special-order and cut-to-length services, and specialty fabrication back-up. We also have the Southeast’s largest inventory of square and rectangular tubing and structural steel beams on a single site.

Saint Joe, Inc.Booth 6516790 N. Franklin Ave., Suite SJLoveland, CO 80538Ph: 970.776.1063Toll Free: 888.229.8742Fax: 970.593.6227www.saintjoeinc.comSaint Joe, Inc. provides offsite storage of member’s electronic engineering and business data and robust 3D BIM data transla-tion services for member clients. Saint Joe uses patent-pending technology that features copyright protection for derivative use inside the Saint Joe membership, via user subscription fees and membership-controlled data access.

St. Louis Screw & BoltBooth 7252000 Access Blvd.Madison, IL 62060Ph: 314.389.7500Toll Free: 800.237.7059Fax: 314.389.7510www.stlouisscrewbolt.comSt. Louis Screw & Bolt is the oldest structural bolt manufacturer in the U.S. The company specializes in direct sales to the steel fabri-cator A307, A325, and A490 structural bolts produced in their new Madison, IL facility. Additionally they are a very large supplier of tension control bolts and electric Tone wrenches. They stock common items that a steel fabricator might need to erect a building such as expansion anchors, wedge bolts, and adhesives. Orders are packed to project requirements.

Schuff Steel Co.Booth 927420 S. 19th Ave.Phoenix, AZ 85009Ph: 602.252.7787Fax: 602.251.0335www.schuff.comFounded as a turnkey steel fabrication and erection company in 1976, Dave and Scott Schuff’s vision of being a total steel con-tractor has become a household name within the steel industry. While wide market growth continued in the design-build/assist market, our in-house detailing, engineering, fabrication and erec-tion expertise allowed Schuff Steel Company to emerge as the largest steel fabricator and erector in the United States. Let us show you how we make it happen on your next project.

Seismic Structural Design AssociatesBooth 740791 E. Washington Blvd.Los Angeles, CA 90021Ph: 213.494.0446Fax: 213.741.8620www.slottedweb.comSeismic Structural Design Associates holds U.S. patents for technology created to remove the cause of seismically induced failure of the pre-Northridge structural steel beam-to-column moment frame connection. The concept of Slotted-Web technol-ogy is removal of nearly all shear from girder flanges, positioning shear almost entirely in web. The Slotted-Web design is the most economical structural steel moment frame connection available. Available in two versions, seismic or wind, governing design demands.

Sen Consulting Corp.Booth 649150 Old Country Rd., Suite 206Mineola, NY 11501Ph: 516.248.9501Fax: 516.248.9502www.sen-group.comWe consist of four detailers in New York and six detailers in Toronto. We do a lot of detailing for contractors and fabricators around the New York, New Jersey, Pennsylvania, and Texas areas. We are involved in structural steel, reinforced concrete, and staircase steel shop drawings. We use AutoCAD and Tekla Structures.

Sharon Companies Ltd., TheBooth 8131481 Exeter Rd.Akron, OH 44306Ph: 330.777.5377Toll Free: 800.792.0129Fax: 330.777.5350www.sharonstair.comSharon has been a steel stair manufacturer with nearly 50 years experience building world-class egress systems. The Sharon Companies provides the technical expertise necessary to deal with the stairway requirements for every phase of a construction project. Keep it simple. Keep it Sharon Stairs.

APRIL 2007 MODERN STEEL CONSTRUCTION

2007 exhibitors nascc: the steel conference Sherwin-WilliamsBooth 439101 Prospect Ave.Cleveland, OH 44115Ph: 216.566.2000Toll Free: 800.524.5979Fax: 440.826.1989www.sherwin-williams.com/imIn the shop and the field, Sher-win-Williams high-performance coating systems for fabricated steel apply and cure quickly, improve your productivity, and provide better long-term value. We have solutions that defend against corrosion and extend the life of steel surfaces. Count on Sherwin-Williams to help you keep your projects on schedule and corrosion at bay.

SidePlate Systems, Inc.Booth 63723422 Mill Creek Dr., Suite 215Laguna Hills, CA 92653Ph: 949.305.7889Toll Free: 800.475.2077Fax: 949.305.6395www.sideplate.comSidePlate Systems, Inc. provides connection de-sign of, and licensing for, the patented SidePlate moment connection for health-care, educational, commercial, and govern-ment clients. The connec-tion is used to design steel special moment frames for lateral force resistance and progressive collapse mitigation, and exceeds all building code and federal government requirements, while saving clients significant time and money.

SKM Industries, Inc.Booth 7161012 Underwood Rd.PO Box 278Olyphant, PA 18447Ph: 570.383.3062Toll Free: 800.851.8464Fax: 570.383.9482www.skmproducts.comSKM Industries, Inc. has been in business since 1980, manufac-turing high-quality industrial paint markers. These markers come in various colors and two different tip styles: a squeeze-action metal tip and our pump-action non-slip pro rubber grip marker. SKM Industries is a women-owned minority business and manu-factures all of its own products at our new and modern facility in Olyphant, PA.

SOFTEK Services, Ltd.Booth 541#275 - 13500 Maycrest WayRichmond, BC V6V 2N8CanadaPh: 604.273.7737Fax: 604.273.7731www.csc-softek.comSince 1981, SOFTEK Services, Ltd. has produced analysis and design software for structural engi-neers, establishing a solid reputation for quality and ease of use. Using the lat-est technology, we continue to deliver powerful and cost-effective solutions. Our products S-FRAME, S-STEEL, and S-CONCRETE Version 7.x set new standards for simple to advanced analysis and integrated steel design. Please visit our booth for more information.

Southern Chapter NISDBooth 2324435 Centerpoint Rd.PO Box 429Pinson, AL 35126Ph: 205.681.3487, x100Fax: 205.681.3493Southern Chapter NISD consists of these firms: DDuck, Inc. (Da-vid Duckworth, 205.680.6500), Drafting Service (Morris T. Crow, 205.655.2168), K. Edward Byrd, P.E. (Ed Byrd, 662.844.9688), Nationwide Detailers, Inc. (Alan Blankenship, 205.681.3487), and Structural Technics (Joel Hicks, 205.956.4501).

Southwest Detailers AssociationBooth 621

Spencer Reed Group, LLCBooth 3275800 Foxridge Dr., Suite 307Mission, KS 66202Ph: 913.671.8880Fax: 913.393.0004www.srgonesource.comSRG originated in 1996 to assist conventional steel fabricators and metal building manufacturers with additional workload for structural detailing and engineering. Our projects range from 5-2500 tons utilizing SDS/2 software. Our diverse expertise, NISD QPP and IDC certifications, advanced computer technologies, experienced personnel, and client commitment make us a valu-able resource to our clients. We are a member of AISC. Please refer to our website, www.srgonesource.com, for further clarifica-tion examples of our projects.

SSDCPBooth 3211923 South Blvd., Studio BCharlotte, NC 28203Ph: 704.370.0840Fax: 704.358.1801www.ssdcp.comSSDCP is the most comprehensive AutoCAD add-on you can get. More than 190 automated programs for detailing stairs, rails, beams, columns, embeds, roof frames, anchor bolts, vertical and horizontal bracing, and everything in between! Written by a steel detailer with over 40 years of experience, SSDCP shows you an on-screen picture of what you’re detailing, then you enter dimen-sions that match the picture. It’s quick and easy! Use it alone or in tandem with 3D software. See us at Booth 321 in New Orleans.

Steel Cast Connections, LLCBooth 6162658 Walnut Ave. S.W.Seattle, WA 98116Ph: 206.250.7035Fax: 206.622.0015www.steelcastconnections.comThe Kaiser Bolted Bracket is the easiest way to provide full spe-cial moment connection capacity to a project. It is field-bolted with only a shop fillet weld for new construction. The retrofit ver-sion is drilled and bolted in place, eliminating welding and spe-cial inspections. The cost savings are significant with the unique bolted design. The bracket requires no fees, has been extensively tested, and is currently in process to become an AISC pre-quali-fied connection.

Steel Erectors Association of AmericaBooth 7232216 West Meadowview Rd., Suite 115Greensboro, NC 27407Ph: 336.294.8880Fax: 413.208.6936www.seaa.netFounded in 1972, SEAA is the largest non-profit trade organiza-tion of its kind for steel erectors, bringing members access to the industry’s most essential technical information, networking opportunities, and career development tools. The Steel Erectors Association of America provides support and representation on steel erection issues that serves the global needs of industry, government, and the public. Because of its strong membership, the SEAA is proactive in meeting industry needs and responsive to worldwide steel erection and construction issues.

Steel Founders’ Society of AmericaBooth 231780 McArdle Dr., Unit GCrystal Lake, IL 60014Ph: 815.455.8240Fax: 815.455.8241www.sfsa.orgSteel Founders’ Society of America (SFSA) is a not-for-profit trade association whose mission is to promote and develop steel castings. SFSA’s membership is limited to steel casting produc-ers. We strive to serve by developing new technology, exchang-ing technical and operating experience, and expanding the steel casting marketplace.

Steel Joist InstituteBooth 2263127 Mr. Joe White Ave.Myrtle Beach, SC 29577Ph: 843.626.1995Fax: 843.626.5565www.steeljoist.orgThe Steel Joist Institute is a not-for-profit organization. Besides setting standards for the steel joist industry, SJI works closely with major building code bodies throughout the country, help-ing to develop code regulations regarding steel joists and joist girders. The Institute also invest thousands of dollars in ongoing research related to steel joists and joist girders, and offers a com-plete library of publications and other training and research aids.

Steel ProjectsBooth 1042Rue des Frères Lumières Vienne Malissol, 38200FrancePh: 33.474.311.730Fax: 33.474.780.410www.steel-projects.frSteel Projects has long been recognized as one of the leading European Software Development Companies whose Windows-based modular products offer tremendous time and cost savings to structural steel fabricators in the integration of CAD, CAM, and MIS systems. The new partnership demonstrates the company’s commitment to offering its existing customers in U.S. and Canada a local hands-on or telephone software support presence.

SteelCad Consulting CorporationBooth 64215309 29th Lane E.Parrish, FL 34219Toll Free: 800.456.7875www.steelcad.comSteelCad offers automated steel detailing and fabrication soft-ware. SteelCad complies with AISC and CISC standards and detailing methods. It details beams, columns, vertical and hori-zontal bracing, stairs, and ladders. It produces erection drawings, gather sheets, material lists, cut lists, and production control or CNC data.

Strand7 Pty Ltd.Booth 443

StrucSoft SolutionsBooth 3125375 Paré, Suite 201Montreal, QC H4P 1P7CanadaPh: 514.341.9646 Toll Free: 877.810.7575Fax: 514.341.8856www.strucsoftsolutions.comStrucSoft Solutions, 3D solution providers of engineering, con-struction, and fabrication applications, specializing in structural, plant design, and wood industries. Founded in 1994, StrucSoft offers its clients time-saving customized applications for steel construction. Using industry standards such as AutoCAD-based ProSteel 3D, our solutions give our clients a competitive edge on any sized project.

Structural Desktop, Inc.Booth 639

MODERN STEEL CONSTRUCTION APRIL 2007

nascc: the steel conference 2007 exhibitorsStructural Engineer magazine - ZweigWhiteBooth 230IBM Plaza330 N. Wabash, Suite 3201Chicago, IL 60611Ph: 312.628.5870Fax: 312.628.5878www.gostructural.com

Structural Engineer serves as a design and specification resource for practicing structural engineers. Because Structural Engineer is the only magazine published exclusively for structural engineers that is not affiliated with a member-driven organization or association, it serves as an unbiased voice and an agent of change through editorial leadership.

Structural Engineering Institute of ASCEBooth 2411801 Alexander Bell Dr.Reston, VA 20191-4400Toll Free: 800.548.2723Fax: 703.295.6361www.seinstitute.orgSEI is a vibrant, 20,000-plus community of structural engineers from around the world. Operating as part of the American Society of Civil Engineers, SEI serves the structural engineering com-munity by developing useful technical publications, championing separate licensing of structural engineers, promoting better busi-ness practices, and advocating the interests of the profession. SEI’s 140 committees allow members from around the world to work together to improve their profession and enhance public safety.

Structural Stability Research CouncilBooth 242University of Missouri-Rolla301 Butler Carlton HallRolla, MO 65409-0030Ph: 573.341.6610Fax: 573.341.4476www.stabilitycouncil.orgThe council provides support and technical counsel for stability research, holds regular meetings to report on research activities, and publishes the definitive work Guide to Stability Design Crite-ria for Metal Structures. The SSRC Annual Stability Conference provides up-to-date information and identifies where efficiencies exist in present understanding of structural behavior. Conference proceedings represent a primary source of highlights of the lat-est solutions to structural problems before they are eventually published in technical journals.

Stud Welding Associates/Pro WeldBooth 104041515 Schaden Rd.Elyria, OH 44035Ph: 440.324.3042Toll Free: 800.874.7860Fax: 440.324.3301www.studwelding.comStud Welding Associates/Pro Weld offers a full line of shear con-nectors, headed anchors, deformed bars, weld studs, stud weld-ing equipment, and accessories backed by a network of product and service warehouses across the country.

Sumter Coatings, Inc.Booth 6432410 Hwy. 15 SouthSumter, SC 29150Ph: 903.481.3400Toll Free: 888.471.3400Fax: 803.481.3776www.sumtercoatings.comSumter Coatings’ systems for the structural steel industry come from 50 years of experience in product development and ser-vice to steel fabricators. Sumter Coatings’ products have been designed for ease of application and excellent protection, and to be environmentally compliant. Sumter Coatings’ products are designed to meet roc and AAPS-TAPS compliant standards. Sumter Coatings is a member of AISC.

Taylor Devices, Inc.Booth 84390 Taylor Dr.North Tonawanda, NY 14120Ph: 716.694.0800Fax: 716.695.6015www.taylordevices.comTaylor Devices is the world-leading manufacturer of fluid vis-cous dampers, lock-up devices, shock transmission units, shock absorbers, cable dampers, and custom tuned mass damping systems. These devices and systems can be used to protect building and bridge structures from the devastating vibrations caused by earthquakes, wind, hurricanes, and other vibrational disturbances.

TDS Industrial Services Ltd.Booth 222201-350 Quebec St.Prince George, BC V2L 5H4CanadaPh: 250.561.1646Fax: 250.562.8549www.tdsindustrial.comSteel Detailers of structural and miscellaneous steel as well as platework since 1979. If you can build it, then we can detail it using Strucad, Tekla Structures (Xsteel), or AutoCAD.

TechFlow Engineers (India) Private Ltd.Booth 325415 - A3, Bldg-2, Sector-1Millennium Business ParkMahape, Navi Mumbai 400 710IndiaPh: 91.22.27782401Fax: 91.22.27782402www.techflowengg.com TechFlow is fully focused structural steel detailing organization having 13 years of strong presence in the global steel detailing industry. Currently we are working with many more U.S., Cana-dian, and Middle Eastern consulting engineers and fabricators. Our services have helped our clients to address bigger projects effectively without investing non-core areas of their business, while we have gained substantial experience in our core area of business.

Tekla, Inc.Booth 431114 Town Park Dr., Suite 500Kennesaw, GA 30144Ph: 770.426.5105Toll Free: 877.TEKLA.OKFax: 770.919.0574www.tekla.com

Tekla Structures is a building information modeling (BIM) system covering the entire project workflow from conceptual design to detailing, fabrication, and construction. Innovative tools provide you with the ability to design and create an intelligent building model of any size or complexity with ease and precision. Tekla Structures allows for real-time collaboration between users across industries and project phases—creating a smooth flow of information. This greatly increases both project quality and productivity.

Tennessee Galvanizing, Inc.Booth 925PO Box 6091535 Industrial Blvd.Jasper, TN 37347Ph: 423.942.1020Toll Free: 877.242.5848Fax: 423.942.1040www.tennesseegalvanizing.comHot-dip galvanizing of hand rail structural steel, fabricated steel, all thread rod, anchor bolts, and fasteners. We offer same-day service and four kettles, and have a ship-and-receive minimum of 18 hours a day. ISO 9001:2000 and ISO 14001 certified.

Tianjin Baolicheng Industry and Trade Co. Ltd.Booth 742West Baiyidao Rd.Daqiuzhuang Town, Tianjin 301606P.R. ChinaPh: 86.22.28897603; 502.410.9455 (USA); 502.526.5188 (USA voice mail)Fax: 86.22.28897603; 810.277.6239 (USA)www.baolicheng.comMain manufacturer of ERW square and rectangular steel tube in China. Size specs: 20mm x 20mm x 1.8mm to 400mm x 400 mm x 14mm, according to: ASTM A500 and A513. We also have a U.S. office located at PO Box 17441, Louisville, KY 40217 (con-tact is John Ma).

TurnaSure, LLCBooth 727340 E. Maple Ave., #305Langhorne, PA 19047Ph: 215.750.1300Toll Free: 800.525.7193Fax: 215.750.6300www.turnasure.com

TurnaSure is the world’s leading manufacturer of direct tension indicating washers which are the best and most simple way of showing that bolts have been installed to their desired clamping forces. It was the legacy company of TurnaSure that originally invented this popular technology 45 years ago. Since then, Tur-naSure has improved the design of these washers so they have reached a level of precision unsurpassed by any other method or design.

United RentalsBooth 989Toll Free: 800.UR.RENTSwww.unitedrentals.comUnited Rentals is your one-stop source for equipment rentals, sales, service, and supplies. We have what it takes to complete your jobs faster, smarter, and better. We offer the most popular names in the industry, so you know you will be getting a trustwor-thy, reliable brand. And with more than 14,000 employees and 2,500 sales specialists, we have the resources and expertise to service you from selection to delivery. Let us help you meet your challenges head-on. Stop by one of our 740+ branches, visit our web site (unitedrentals.com), or call 800-UR-RENTS.

V&S GalvanizingBooth 6311000 Buckeye Park Rd.Columbus, OH 43207Ph: 614.449.8281Fax: 614.449.8851www.hotdipgalvanizing.comV&S Galvanizing is a leader in the hot-dip galva-nizing industry, with many locations on the East Coast and in the Midwest, and more than 70 loca-tions worldwide. Specializ-ing in corrosion protection of steel with zinc by hot-dip galvanizing, we offer the DUROZINQ program of galvanizing, packaging, tagging, and guaranteed service. We also offer our COLORZINQ system (paint over galvanizing) that adds brilliant color to a base of corrosion protection. V&S offers trucking and many other value-added services. Call us for all of your corrosion protection needs.

2007 exhibitors nascc: the steel conference

Exhibitorsarranged by booth number

212 Infasco213 Pneutek, Inc.214 PlanIT Design Group215 Hodell-Natco Industries, Inc.216 Delta Structural Steel Services218 Radley Corporation219 Dowco Consultants Ltd.220 Jobber Instruments Calculator Co.222 TDS Industrial Services Ltd.224 Assn. for Iron & Steel Technology 225 North American Galvanizing Co.226 Steel Joist Institute230 Structural Engineer - Zweig White231 Steel Founders’ Society of America232 Southern Chapter NISD233 Birmingham Fastener, Inc.234 National Institute of Steel Detailing235 American Galvanizers Association238 IMPACT239 GratingFasteners, Inc.241 Structural Engineering Inst. of ASCE242 Structural Stability Research Council243 American Metal Market244 Pieresearch245 Saginaw Pipe Co., Inc248 G.W.Y., Inc250 American Subcontractors Association252 Voss Engineering, Inc.257 National Steel Bridge Alliance312 StrucSoft Solutions313 Bentley Systems, Inc. - RAM/STAAD Solution Center319 Gaule Detailing321 SSDCP323 Ronstan Cable and Rod Systems325 TechFlow Engineers (India) Pvt. Ltd.327 Spencer Reed Group, LLC330 Girder-Slab Technologies, LLC332 New Millennium Building Systems334 Omnitech Associates, Inc.338 Cleveland City Forge339 Lincoln Structural Bolt342 Holtec Consulting Private Ltd.343 RMM Global, LLC344 CARBOLINE/AD Fire Protection349 4D Steel Detailing (USA) Ltd.351 National Steel Constructors, LLC413 Design Data418 FabTrol Systems, Inc.419 AceCad Software, Inc.424 Metals USA425 CMC Steel Products & CMC Joist426 Arcelor International America431 Tekla, Inc.438 Detailed Design Drafting Services Ltd.439 Sherwin-Williams440 Allied Tube & Conduit443 Strand7 Pty Ltd444 P2 Programs445 LeJeune Bolt Co.448 LTC, Inc.449 FabSuite, LLC450 Bechtel Power 452 Brown Consulting Services, Ltd.453 SAFI Quality Software456 AISC Online Steel Detailing Course457 AISC Certification457 AISC457 Quality Management Company, LLC513 Nucor - Vulcraft Group513 Nucor Corporation513 Nucor Fastener - Indiana513 Nucor-Yamato Steel Co.523 Intsel Steel/R&S Steel/Alta-Steelco525 BD Structural Design531 Canam Steel Corporation537 Wheeling Corrugating Co.541 SOFTEK Services Ltd.542 Real Technology, LLC543 Quincy Joist Co.548 McCann Equipment/Eastern Pneumatics & Hydraulics549 CSC Inc550 Chicago Metal Rolled Products553 Atema, Inc.612 Hougen Manufacturing, Inc.613 Peterson Beckner Industries, Inc.614 InfoSight Corporation616 Steel Cast Connections, LLC617 Lohr Structural Fasteners, Inc.617 Quindata618 NCSEA/STRUCTURE magazine/SECB620 Lindapter North America, Inc.621 Southwest Detailers Association

622 ESAB Welding & Cutting Products623 ASTM International625 J. B. Long, Inc.627 A-PLUS Galvanizing631 V&S Galvanizing636 Chaparral Steel637 SidePlate Systems, Inc.639 Structural Desktop, Inc.640 BDS Steel Detailers, Inc.641 Eigen Technical Services Pvt. Ltd642 SteelCad Consulting Corporation643 Sumter Coatings, Inc.645 Creative Engineering Services648 Buckner Companies649 Sen Consulting Corporation650 Chatham Steel Corporation651 Saint Joe, Inc.652 PDM Steel Service Centers, Inc.653 Aztec Galvanizing Services657 Corus International Americas712 International Paint LLC713 Hilti, Inc.714 LS Industries716 SKM Industries Inc.718 Prothious Engineering Services719 Algoma Steel, Inc.722 Haydon Bolts, Inc.723 Steel Erectors Assn. of America724 Romac Computer Services725 SLSB dba St. Louis Screw & Bolt726 Morgan Quality Products 727 TurnaSure, LLC731 Computers and Structures, Inc.736 RISA Technologies740 Seismic Structural Design Associates742 Tianjin Baolicheng Industry & Trade Co. Ltd.743 Graitec, Inc.744 Applied Bolting Technology, Inc.748 Albina Pipe Bending Co., Inc.749 M.D. Bowers, Inc.812 Metal Dek Group, a unit of CSi813 Sharon Companies Ltd., The818 Combilift819 Cerabco Ltd.821 American Welding Society822 Bechtel National, Inc.823 Kubes Steel, Inc.824 Fisher & Ludlow831 Quebec Detailing Connection837 Industrial Galvanizers America839 LUSAS841 Hillsdale Fabricators 843 Taylor Devices, Inc.848 Genesis Quality Systems, Inc.849 Paramount Roll & Forming, Inc.913 Mazak Optonics Corporation918 KIP America920 Design-Build Institute of America 921 Lincoln Electric922 Moldtek Technologies Ltd.925 Tennessee Galvanizing, Inc.927 Schuff Steel Company931 Nitto Kohki, USA, Inc.933 Fastenal Company935 Nelson Stud Welding, Inc.936 Bug-O Systems940 Assurance Agency Ltd.942 Fabreeka International, Inc.948 Group CADmax989 United Rentals991 Wheaton Detailing Service, Inc.1013 Peddinghaus Corporation1020 Burlington Automation1024 Infra-Metals Co.1030 American Punch Company1031 Ficep Corporation1034 Whiting Corporation1036 Allied Machine & Engineering Corp.1038 Cambco, Inc.1040 Stud Welding Associates/Pro Weld1042 Steel Projects1048 Mi-Jack Products, Inc.1051 Behringer Saws, Inc.1212 Ocean Machinery 1230 COMEQ, Inc.1236 Cleveland Punch & Die Co., The1250 Daito USA, Inc.1312 Voortman Corporation1330 Controlled Automation, Inc.

(exhibitors current as of March 15, 2007)

Voortman CorporationBooth 13121 Dearborn Square, Suite 639 Kankakee, IL 60901Ph: 815.935.3010Fax: 815.735.2201www.voortmancorp.comVoortman Corporation manufactures the most comprehensive range of steel processing machinery for the steel fabricator in today’s market place. The range of equipment includes beam pro-cessing lines, plate and angle processing lines, coping systems, thermal cutting systems combined with drilling, tapping, punching and marking, and shot-blasting lines. Voortman has pioneered the automated fabrication shop that can run with minimal or no opera-tor intervention, with software and control systems tried and tested in our own fabrication facility producing 15,000 tons per year.

Voss Engineering, Inc.Booth 2526965 N. Hamlin Ave.Lincolnwood, IL 60712Ph: 847.673.8900Toll Free: 800.323.3935Fax: 847.673.1408www.vossengineering.comVoss Engineering, Inc. provides expansion/slide bearing assem-blies, bearing pads, and isolation materials for highway bridges, industrial structures, machines, process piping, and commercial buildings. Our product line includes the following structural bear-ing pad materials: SORBTEX (preformed fabric pad/cotton duck pad); NEOSORB (AASHTO grade polychloroprene); VSB Slide Bearings (PTFE and steel plate); and FIBERLAST or VOSSCO (random oriented fiber pads).

Wheaton Detailing Service, Inc.Booth 99117518 E. StrackSpring, TX 77379Ph: 281.655.4441 Ext. 10Fax: 281.966.1576www.wheatondetailing.com

Wheaton Detailing Service offers complete shop and field drawings for structural steel fabrication, specializ-ing in petrochemical and commercial steel. Wheaton Detailing Service is located just north of Houston, Texas. Meeting the industry’s engineering and fabrication needs, Wheaton’s experienced detailers use auto-mated detailing software (SDS/2, etc.) integrated with proven drawing

procedures to ensure that the quality of each drawing is un-com-promised. Wheaton Detailing Service is dedicated to offering an unparalleled level of service to their customers.

Wheeling Corrugating CompanyBooth 5371134 Market St.Wheeling, WV 26003Toll Free: 800.922.3325Fax: 304.234.2330www.wheelingcorrugating.comWheeling Corrugating Company, a division of Wheeling - Pittsburgh Steel Corporation, is headquartered in Wheeling, WV. Wheeling Corrugating is one of America’s leading fabricators of steel decking for the construction, highway, and bridge building markets. Wheel-ing Corrugating has the distinction of being our nation’s most expe-rienced decking manufacturer, with more than 117 years of metal forming history. Wheeling Corrugating has grown to 14 facilities nationally, which are strategically located throughout the country. Ask about the Seismic ShearLoc System, coming soon.

Whiting CorporationBooth 103426000 Whiting WayMonee, IL 60449-8060Toll Free: 800.255.8594Fax: 708.587.2001www.whitingcorp.comWhiting Corporation manufactures custom designed and pre-engineered overhead and gantry cranes for all types of critical indoor and outdoor applications. These long-life and low-main-tenance cranes are built in capacities up to 600 tons for a single hook, and may be cab, floor, or remote controlled. Whiting has more than 120 years of manufacturing experience in providing dependable capital equipment for a wide variety of applications.

APRIL 2007 MODERN STEEL CONSTRUCTION

NASCCTHE STEEL CONFERENCE