2008 catalog - pbepro • 1-800-742-7731 choosing the proper gun for your application conventional...
TRANSCRIPT
www.sharpe1.com • 1-800-742-7731
Choosing the Proper Gun for Your ApplicationConventional Air Spray
Conventional air spray technology is easy to use, delivers a Class A automotive finish quality, but has the lowest transfer efficiency (<25%) of all technologies.
High Volume Low Pressure (HVLP)
HVLP was developed to improve transfer efficiency over traditional conventional air spray technology. HVLP transfer efficiency is a minimum of 65% as long as the pressure at the aircap does not exceed 10 psi (0.7 MPa, 0.7 bar). Finish quality is similar to air spray, however the spray rates are lower than conventional air spray. In some areas, HVLP technology is required to comply with environmental standards.
Low Volume Low Pressure (LVLP)
LVLP technology is a variation on HVLP technology. LVLP uses a low volume of air to atomize the coating compared to the high volume of air for HVLP. At 16 psi (0.1 MPa, 1.1 bar), LVLP offers the same transfer efficiency as HVLP. Due to the low CFM requirements, LVLP is an excellent option when shop air is limited.
Compliant
Complaint technology delivers transfers efficiency equal to or better than HVLP as long as the inlet pressure to the gun does not exceed 35 psi (0.24 MPa, 2.4 bar). The finish quality is comparable to air spray, air consumption is lower than HVLP, and the production rates are higher than HVLP. This technology is also capable of atomizing higher viscosity materials.
Welcome to Sharpe Manufacturing. Sharpe, a Graco company, manufactures and sells paint spraying equipment and accessories for the professional automotive refinisher. In 2003, Sharpe joined forces with Graco Inc, a world leader in fluid handling systems and components. Graco’s investment in Sharpe Manufacturing has meant the introduction of products that offer uncompromising performance, quality, reliability and a competitive edge. The talented and dedicated engineers in Minneapolis, as well as the highly skilled manufacturing team in Sioux Falls, SD, stand proud behind each of the products they design and produce. Sharpe continues to seek out innovative solutions for the diverse, global automotive refinish market and its combined distribution network ensures you’ll get the equipment you need when you need it. If you have any questions please contact our customer service via phone, fax line, e-mail or web site at www.sharpe1.com. We will respond as quickly as possible. Thank you for this opportunity to do business with you.
Respectfully,
Sharpe Manufacturing
visit www.sharpe1.com for updated information
www.sharpe1.com • 1-800-742-7731
1
ContentsChoosing the Proper Gun for Your Application . . . ii
RAZOR® Guns
HVLP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
HVLP for Metallic . . . . . . . . . . . . . . . . . . . 3
LVLP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Compliant . . . . . . . . . . . . . . . . . . . . . . . . . 5
Conventional . . . . . . . . . . . . . . . . . . . . . . . 6
HVLP for Primer . . . . . . . . . . . . . . . . . . . . 7
Siphon Feed . . . . . . . . . . . . . . . . . . . . . . . 8
Finex™ Guns
Gravity Feed HVLP and Mini-HVLP . . . . . . . 9
Gravity Feed Conventional . . . . . . . . . . . . 10
Mini Spray Guns
Gravity Feed System . . . . . . . . . . . . . . . . 11
Pressure Feed System . . . . . . . . . . . . . . 11
D-5-55 Detail Spray Guns . . . . . . . . . . . . 11
775 Non-HVLP Spray Guns . . . . . . . . . . . . . . 12
Refrigerated Air Dryers . . . . . . . . . . . . . . . . . 13
Dryaire Membrane System . . . . . . . . . . . . . . 14
Dryaire Desiccant System . . . . . . . . . . . . . . . 15
Air Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
In-Line Filters & Coalescers . . . . . . . . . . . . . 17
Air Control Units . . . . . . . . . . . . . . . . . . . . . . 18
Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Accessories
Cup Assemblies . . . . . . . . . . . . . . . . .20-22
PPS Adapters . . . . . . . . . . . . . . . . . . . . . 22
Air Adjusting Valves . . . . . . . . . . . . . . . . . 23
Other Accessories . . . . . . . . . . . . . . . .24-25
How to Use Dr. Gun . . . . . . . . . . . . . . . . . . . . 26
How to Build and Entire Sharpe System . .26-28
Reference Pages
Conversion Chart List . . . . . . . . . . . . . . . 29
Spray Gun Reference Guide . . . . . . . .30-31
Replacement Parts Drawings Index . . .32-49
Return Unused Inventory . . . . . . . . . . .50-51
Terms & Conditions of Sale . . . . . . . . . . . 52
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54
Warranty Information . . . . . . . inside back cover
www.sharpe1.com • 1-800-742-7731
2
RAZOR®
HVLP Spray Gun
Premium Performance & Quality• Extremelysmoothspraypatternforsuperiorfinishes
• Capableofatomizingabroadrangeofcoatingsfromprimer, base, to clear
• Ergonomicgunhandle,lightweight,andlowtriggerpull for ultimate painter comfort
• MadeintheUSAandbackedbya3-yearwarranty
The best American made gun for spraying base coat and clear coat when HVLP technology is required.
The RAZOR is waterborne compatible with 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning.
3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included.
• AirInletSize:1/4"npsm(R1/4-19)
• Max.AirInletPressure:29psi(0.2MPa,2.0bar)
• AirConsumption:14.4 CFM at 29 psi (0.2 MPa, 2.0 bar)
• CupSize:23oz(0.68liter)cup
• Weightwithcup:1.3lbs(0.6kg)
• Finish:Nickel
• InstructionManual:PN311684
• ReferencePage#:32
Size Gun PN Nozzle PN Needle Assembly Applications1.0 mm 253431 253792 253769 Base and clear coats, light industrial, hobby, spot repair
1.2 mm 253432 253793 253769 Base coat, high solid clear coat, waterborne base coat, single stage
1.3 mm 253433 253794 253771 Base and clear coats, waterborne base coat, high solid, single stage
1.4 mm 253434 253795 253772 Base and clear coats, single stage, sealers, low solid clear
1.5 mm 253435 253796 253772 Base and clear coats, sealers, enamels, medium to high viscosity
1.7 mm 253436 253797 253772 Base and clear coats, primer, high viscosity
RAZOR Primer1.8mm nozzle
RAZOR HVLPMetallic1.4mm nozzle
RAZOR HVLP & Compliant1.4mm nozzle
RAZOR LVLP1.4mm nozzle
Aircap Pattern
Aircap Part No. 253824
1.4 mm nozzle
14 in
Digi-tell™PN UO5510 (pg. 23)
Aluminum Gravity FeedCup 34 oz (1 ltr.)
PN 253978 (pg. 20)
Dryaire Desiccant SystemPN 6760 (pg. 15)
www.sharpe1.com • 1-800-742-7731
RAZOR PrimerPN 253438 (pg. 7)
www.sharpe1.com • 1-800-742-7731
3
RAZOR®
HVLP for Metallic Spray Gun
RAZOR Primer1.8mm nozzle
RAZOR HVLPMetallic1.4mm nozzle
RAZOR HVLP & Compliant1.4mm nozzle
RAZOR LVLP1.4mm nozzle
Aircap Pattern
Aircap Part No. 289212
1.4 mm nozzle
14 in
Premium Performance & Quality• Well-definedspraypatternforsuperior
material distribution
• Savetimeandmoneywithfewerpassesandlessmaterial used
• Achievefactorycolorwithcuttingedgetechnology
• Ergonomicgunhandle,lightweight,andlowtriggerpull for ultimate painter comfort
• MadeintheUSAandbackedbya3-yearwarranty
The RAZOR is waterborne compatible with 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning.
3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included.
• AirInletSize:1/4"npsm(R1/4-19)
• Max.AirInletPressure:29psi(0.2MPa,2.0bar)
• AirConsumption:14.4 CFM at 29 psi (2.0 bar)
• CupSize:23oz(0.68liter)cup
• Weightwithcup:1.3lbs(0.6kg)
• Finish:Nickel
• InstructionManual:PN311684
• ReferencePage#:32
Size Gun PN Nozzle PN Needle Assembly Applications1.3 mm 289214 253794 253771 Metallic paint & fine metallic paint
1.4 mm 289215 253795 253772 Metallic paint & fine metallic paint
1.5 mm 289216 253796 253772 Metallic paint & fine metallic paint
Air Adjusting Valve with Gauge
PN 2210 (pg. 23)
Spray Gun Brush KitPN 8260 (pg. 25)
6 ft. Air HosePN 7110 (pg. 24)
Dryaire Membrane SystemPN 6770 (pg. 14)
www.sharpe1.com • 1-800-742-7731
4
www.sharpe1.com • 1-800-742-7731
RAZOR®
LVLP Spray Gun
Premium Performance & Quality• Capableofsprayingbasecoatandclearcoat,the
LVLP RAZOR has been optimized to deliver the finest finish quality for clear coats
• TheLVLPisanexcellentchoiceforshopswhereairsupply is limited
• Ergonomicgunhandle,lightweightandlowtriggerpull for ultimate painter comfort
• MadeintheUSAandbackedbya3-yearwarranty
The RAZOR is waterborne compatible with 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning.
3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included.
• AirInletSize:1/4"npsm(R1/4-19)
• Max.AirInletPressure:16psi(0.1MPa,1.1bar)
• AirConsumption:8.8 CFM at 16 psi (1.1 bar)
• CupSize:23oz(0.68liter)cup
• Weightwithcup:1.3lbs(0.6kg)
• Finish:Nickel
• InstructionManual:PN311684
• ReferencePage#:32
Size Gun PN Nozzle PN Needle Assembly Applications1.2 mm 249994 253802 253769 Base and clear coats, high solid, single stage
1.3 mm 253427 253803 253771 Base and clear coats, high solid, single stage
1.4 mm 253428 253804 253772 Base and clear coats, single stage, sealers, low solid clear coat
1.5 mm 253429 253805 253772 Base and clear coats, enamels, medium to high viscosity
1.6 mm 253430 253806 253773 Base and clear coats, enamels, medium to high viscosity
RAZOR Primer1.8mm nozzle
RAZOR HVLPMetallic1.4mm nozzle
RAZOR HVLP & Compliant1.4mm nozzle
RAZOR LVLP1.4mm nozzle
Aircap Pattern
Aircap Part No. 253823
1.4 mm nozzle
13 in
Digi-tell™PN UO5510 (pg. 23)
Spray Gun Brush KitPN 8260 (pg. 25)
Aluminum Gravity FeedCup 34 oz (1 ltr.)
PN 253978 (pg. 20)
Dryaire Desiccant SystemPN 6760 (pg. 15)
5
www.sharpe1.com • 1-800-742-7731
RAZOR®
Compliant Spray Gun
RAZOR Primer1.8mm nozzle
RAZOR HVLPMetallic1.4mm nozzle
RAZOR HVLP & Compliant1.4mm nozzle
RAZOR LVLP1.4mm nozzle
Aircap Pattern
Aircap Part No. 253825
1.0-1.6 mm nozzle
Aircap Part No. 253826
2.0-2.5 mm nozzle
14 in
Premium Performance & Quality• First-rateatomization,withtransferefficiencyequalto
or better than HVLP
• Complianttechnologyiscapableofatomizinghigherviscosity materials and offers higher production rates when compared to HVLP
• Ergonomicgunhandle,lightweightandlowtriggerpull for ultimate painter comfort
• MadeintheUSAandbackedbya3-yearwarranty
The RAZOR is waterborne compatible with 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning.
3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included.
• AirInletSize:1/4"npsm(R1/4-19)
• Max.AirInletPressure:35psi(0.24MPa,2.4bar)
• AirConsumption:11.2 CFM at 35 psi (2.4 bar)
• CupSize:23oz(0.68liter)cup
• Weightwithcup:1.3lbs(0.6kg)
• Finish:Nickel
• InstructionManual:PN311684
• ReferencePage#:32
Size Gun PN Nozzle PN Needle Assembly Applications1.0 mm 253440 253816 253769 Base and clear coats, light industrial, hobby, spot repair
1.2 mm 253441 253817 253769 Base and clear coats, high solid, single stage
1.3 mm 253442 253818 253771 Base and clear coats, high solid, single stage
1.4 mm 253443 253819 253771 Base and clear coats, single stage, sealers, low solid clear
1.5 mm 288654 253820 253772 Primer, high viscosity
1.6 mm 253444 253820 253772 Primer, high viscosity
2.0 mm 253445 253821 253774 Primer, high viscosity
2.5 mm 253446 253822 253775 Primer, high viscosity
Air Adjusting Valve with Gauge
PN 2210 (pg. 23)
Spray Gun Brush KitPN 8260 (pg. 25)
6 ft. Air HosePN 7110 (pg. 24)
Dryaire Membrane SystemPN 6770 (pg. 14)
www.sharpe1.com • 1-800-742-7731
6
RAZOR®
Conventional Spray Gun
RAZOR Primer1.8mm nozzle
RAZOR HVLPMetallic1.4mm nozzle
RAZOR HVLP & Compliant1.4mm nozzle
RAZOR LVLP1.4mm nozzle
Aircap Pattern
Aircap Part No. 288451 - 1.2-1.6 mm nozzle
288452 - 1.8 mm nozzle
288453 - 2.5 mm nozzle
13 in
Premium Performance & Quality• Finestfinishqualitywiththelowesttransferefficiency
when compared to HVLP, LVLP, and Compliant technology
• Widevarietyofnozzlesizesandfastproductionratesto meet your needs
• Ergonomicgunhandle,lightweightandlowtriggerpull for ultimate painter comfort
• MadeintheUSAandbackedbya3-yearwarranty
The Conventional RAZOR has 100% stainless steel fluid passages and stainless steel needle and nozzle. RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning.
• AirInletSize:1/4"npsm(R1/4-19)
• AirConsumption:13.3 CFM at 43 psi (3.0 bar)
• CupSize:23oz(0.68liter)cup
• Weightwithcup:1.3lbs(0.6kg)
• Finish:Nickel
• InstructionManual:PN311684
• ReferencePage#:32
Size Gun PN Nozzle PN Needle Assembly Applications1.2 mm 288279 288295 253772 Base and clear coats, high solid, single stage
1.3 mm 288280 288296 253772 Base and clear coats, high solid, single stage
1.4 mm 288281 288297 253771 Base and clear coats, low solid clear, single stage, sealers
1.6 mm 288282 288298 253772 Primer, high viscosity
1.8 mm 288283 288299 253772 Primer, high viscosity
2.5 mm 288284 288300 253775 Primer, high viscosity
Digi-tell™PN UO5510 (pg. 23)
Spray Gun Brush KitPN 8260 (pg. 25)
Aluminum Gravity FeedCup 34 oz (1 ltr.)
PN 253978 (pg. 20)
Dryaire Desiccant SystemPN 6760 (pg. 15)
www.sharpe1.com • 1-800-742-7731
www.sharpe1.com • 1-800-742-7731
7
RAZOR®
HVLP for Primer Spray Gun
RAZOR Primer1.8mm nozzle
RAZOR HVLPMetallic1.4mm nozzle
RAZOR HVLP & Compliant1.4mm nozzle
RAZOR LVLP1.4mm nozzle
Aircap Pattern
Aircap Model No. 253828
1.8 mm nozzle
14 in
High Performance Primer• Deliverstopqualityatomization
• Minimizesoverspraytoreducemaskingandsanding
• Ergonomicblueanodizedgunhandle,lightweightandlow trigger pull for ultimate painter comfort
• MadeintheUSAandbackedbya3-yearwarranty
The RAZOR primer has a stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packing and low cost of ownership due to cost effective repair parts.
23 ounce brushed aluminum cup included. 3M™ PPS™ Adapter is not included. It is an accessory and can be purchased separately.
• AirInletSize:1/4"npsm(R1/4-19)
• Max.AirInletPressure:29psi(0.2MPa,2.0bar)
• AirConsumption:14.4 CFM at 29 psi (2.0 bar)
• CupSize:23oz(0.68liter)cup
• Weightwithcup:1.3lbs(0.6kg)
• Finish:BlueAnodized
• InstructionManual:PN311684
• ReferencePage#:32
Size Gun PN Nozzle PN Needle Assembly Applications1.5 mm 253437 253789 253772 Primer, high viscosity
1.8 mm 253438 253790 253774 Primer, high viscosity
2.3 mm 253439 234791 253774 Primer, high viscosity
www.sharpe1.com • 1-800-742-7731
Air Adjusting Valve with Gauge
PN 2210 (pg. 23)
Spray Gun Brush KitPN 8260 (pg. 25)
6 ft. Air HosePN 7110 (pg. 24)
Dryaire Membrane SystemPN 6770 (pg. 14)
www.sharpe1.com • 1-800-742-7731
8
RAZOR®
Siphon Spray Guns
Premium Performance & Quality
HVLP Siphon
Compliant Siphon
Conventional Siphon
• Extremelysmoothspraypatternforsuperiorfinishes
• Capableofatomizingabroadrangeofcoatings
• Ergonomicgunhandle,lightweightandlowtriggerpull
• Long-termaffordabilitywithultralonglifeneedlepacking
• MadeintheUSAandbackedbya3-yearwarranty
• Includesspraygunand1qt.(0.95liter)cupassembly
• AirInletSize:1/4npsm(R1/4-19)• FluidInlet:3/8npsm(R3/8-19)• Max.AirPressureHVLP:30psi(0.21MPa,2.1bar)• Max.AirPressureCompliant:35psi(0.24MPa,2.4bar)• CupSize:23oz(0.68liter)cup• Weightwithcup:2.1lbs(1.0kg)• Finish:Nickel• InstructionManual:PN311685• ReferencePage#:34
Size
Gun PN
Aircap
Nozzle
Needle Assembly
Air Consumption
Applications
2.2 mm 287961 253827 253778 253777 11.2 CFM at 30 psi (2.1 bar) Primer, high viscosity
Size
Gun PN
Aircap
Nozzle
Needle Assembly
Air Consumption
Applications
1.0 mm 288285 288454 288301 288640 10.4 CFM at 35 psi (2.4 bar)
Base and clear coats, high solid, single stage
1.2 mm 288286 288454 288302 288641 10.4 CFM at 35 psi (2.4 bar)
Base and clear coats, high solid, single stage
1.3 mm 288287 288454 288303 288641 10.4 CFM at 35 psi (2.4 bar)
Base and clear coats, single stage, sealers, low solid clear
1.4 mm 288288 288454 288304 288642 10.4 CFM at 35 psi (2.4 bar)
Base and clear coats, single stage, sealers, low solid clear
1.6 mm 288289 288454 288305 288642 10.4 CFM at 35 psi (2.4 bar)
Base and clear coats, single stage, sealers, low solid clear
1.8 mm 288290 288454 288306 288643 10.4 CFM at 35 psi (2.4 bar) Primer, high viscosity
Size
Gun PN
Aircap
Nozzle
Needle Assembly
Air Consumption
Applications
1.5 mm 288291 288455 288307 288642 12.2 CFM at 43 psi (3.0 bar)
Base and clear coats, single stage, sealers, low solid clear
1.8 mm 288292 288455 288308 288642 12.2 CFM at 43 psi (3.0 bar)
Base and clear coats, single stage, sealers, low solid clear
2.0 mm 288293 288456 288309 253777 13.5 CFM at 43 psi (3.0 bar) Primer, high viscosity
2.5 mm 288294 288457 288310 253777 13.1 CFM at 43 psi (3.0 bar) Primer, high viscosity
www.sharpe1.com • 1-800-742-7731
www.sharpe1.com • 1-800-742-7731
9
Finex™
Gravity Feed HVLP and Mini-HVLP
Value, Innovation & Performance!• Value–Qualitygunsataffordableprices• Innovation–Aclassleaderwith29%fewerparts,
readily available repair kits, optional 3M™ PPS™ adapters, optional interchangeable cups and lowest trigger pull among guns in its class
• Performance–Unmatchedspraypatternsizeandquality
The FX3000 is a full-size HVLP gun with a large fan pattern, and the FX1000 mini-HVLP has two-finger control for anti-fatigue painting in confined access areas like doorjambs or for detailed touch-up work.
• AirInletSize:1/4"npsm(R1/4-19)• Max.AirInletPressure:29psi(0.2MPa,2.0bar)• PatternSize:FX300012.5",FX10009"• AirConsumptionat29psi(0.2MPa.2/0bar):
FX3000 9.5 SCFM, FX1000 7.0 SCFM• CupSize:FX300020oz(600cc),FX10004oz(125cc)• WeightwithCup:
FX3000 1.1 lb (0.5 kg), FX1000 0.9 lb (0.4 kg)• Finish:BlackNickel• InstructionManual:PN312372• ReferencePage#:36
Size Gun PN Needle, Nozzle, Aircap Kits ApplicationsHVLP FX3000
1.0 mm 288878 289296 Base and clear coats, light industrial, hobby, spot repair
1.3 mm 288879 289297 Base and clear coats, high solid, single stage
1.4 mm 288880 289298 Base and clear coats, single stage, sealers, low solid clear, clear coat
1.5 mm 288881 289299 Base and clear coats, sealers, enamels, medium to high viscosity
1.8 mm 288882 289300 Primer, high viscosity
Mini-HVLP FX1000
0.6 mm 289198 289286 Base and clear coats, light industrial, hobby, spot repair
0.8 mm 289199 289287 Base and clear coats, light industrial, hobby, spot repair
1.0 mm 289200 289288 Base and clear coats, light industrial, hobby, spot repair
1.2 mm 289221 289289 Base and clear coats, high solid, single stage
1.4 mm 289222 289290 Base and clear coats, single stage, sealers, low solid clear, general purpose
Ultra Mini Aluminum Cup 125cc
PN 289517 (pg. 21)
Mini Aluminum Cup 250cc
PN 289321 (pg. 21)
3M™ PPS™ AdapterPN 289520 (pg. 22)
FX1000, 1.0 needle, nozzle repair, aircap kit
PN 289288 (pg. 36)
1 Year Warranty
FX3000 FX1000
www.sharpe1.com • 1-800-742-7731
www.sharpe1.com • 1-800-742-7731
10
Finex™
Gravity Feed Conventional
Value, Innovation & Performance!• Value–Qualitygunsataffordableprices• Innovation–Aclassleaderwith29%fewerparts,
readily available repair kits, optional 3M™ PPS™ adapters, optional interchangeable cups and lowest trigger pull among guns in its class
• Performance–Unmatchedspraypatternsizeandquality
The FX2000 conventional air spray gun delivers an excellent automotive finish when HVLP is not required. This conventional gun has multiple nozzle options and a large spray pattern up to 12 inches. Includes 600cc aluminum cup, wrench and cleaning brush.
• AirInletSize:1/4"npsm(R1/4-19)• Max.AirInletPressure:29psi(0.2MPa,2.0bar)• PatternSize:12"• AirConsumption:
9.5 CFM at 43 psi (0.3 MPa. 3.0 bar)• CupSize:20oz(600cc)• Weightwithcup:1.1lb(0.5kg)• Finish:BlackNickel• InstructionManual:PN312372• ReferencePage#:36
Ultra Mini Aluminum Cup 125cc
PN 289517 (pg. 21)
Mini Aluminum Cup 250cc
PN 289321 (pg. 21)
3M™ PPS™ AdapterPN 289520 (pg. 22)
FX2000, 1.0 needle, nozzle repair, aircap kit
PN 289291 (pg. 36)
1 Year Warranty
FX2000
Size Gun PN Needle, Nozzle, Aircap Kits ApplicationsConventional FX2000
1.0 mm 288883 289291 Base and clear coats, light industrial, hobby, spot repair
1.3 mm 288884 289292 Base and clear coats, high solid, single stage
1.4 mm 288885 289293 Base and clear coats, single stage, sealers, low solid clear
1.5 mm 288886 289294 Base and clear coats, sealers, enamels, medium to high viscosity
1.8 mm 288887 289295 Primer, high viscosity
www.sharpe1.com • 1-800-742-7731
11
www.sharpe1.com • 1-800-742-7731
Size
Gun PN
Aircap
Applications
1.4 mm 7040 34806 All automotive colors & clears
Size
Gun PN
Aircap
Applications
1.1 mm 7045 34808 All automotive colors & clears
Size
Gun PN
Aircap
Applications
1.4 mm 7030 29006 All automotive colors & clears
Mini Spray GunsDetails & Touch-Ups
MGF HVLP Mini Gravity Feed System
MPF HVLP Mini Pressure Feed System
D-5-55 Detail Spray Gun
• AirInletSize:1/4"npsm(m)
• AirConsumption:2.9CFM
• Max.InletPressure:40psi(2.7bar)
• AircapPressure:10psi(0.6bar)
• Weight:9oz(0.25kg)
• RepairKit:PN34835
• InstructionManual:PN309989
• ReferencePage#:38
• AirInletSize:1/4"npsm(m)
• AirConsumption:3.5CFM
• Max.InletPressure:40psi(2.7bar)
• AircapPressure:10psi(0.6bar)
• RepairKitPN:34835
• InstructionManual:PN309990
• ReferencePage#:39
• AirInletSize:1/4"npsm(R1/4-19)
• AirConsumption:4.1CFM
• OrderwithModelD-500 cup assembly
• GunWeight:8oz(0.22kg)
• RepairKitPN:29086
• InstructionManual:PN309991
• ReferencePage#:40• CupAssembly(6oz):PNUO7510
• ExtraCupwithCover:PNUO7530
The MGF HVLP Mini Gravity Feed system is ideal for all types of touch-up and detail work and sprays all automotive coatings. It is designed for left or right hand use and features an infinitely variable (round to flat) fan control. Includes UO7505 (4 oz) aluminum gravity feed cup.
The MPF HVLP Mini Pressure Feed system is excellent for high speed production. It is designed for left or right hand use and features an infinitely variable (round to flat) fan control.
The MPF HVLP Mini Pressure Feed system has production-like atomization quality. It is easy to service, easy to use and ideal for painting small areas. The trigger is designed for right or left hand use.
UO7510
7530
12
www.sharpe1.com • 1-800-742-7731
Size PN Aircap ApplicationsGun & Cup 1.8 mm 9500 16111 Medium solids, colors, clears, enamels
Gun Only 1.8 mm 6835 16111 Medium solids, colors, clears, enamels
12
Non-HVLP Spray GunClassic Heavy-Duty Production
775 Model 9500 - Combo Gun and Cup • AirInletSize:1/4npsm(m)
• AirConsumption: 11.0 CFM at 50 psi
• InstructionManual:PN310587
• ReferencePage#:41
The 775 Non-HVLP Spray Gun features self-aligning aircap for a perfect pattern. Our “classic” heavy-duty production spray gun provides outstanding performance and reliability. This value-priced combo package includes spray gun (PN 6835) and special cup assembly (PN 6610).
Problem Cause Solution
RIGHT
Normal pattern. No action necessary.
WRONG Heavy top or bottom pattern
Dirty or damaged aircap or fluid nozzle.
Rotate aircap 180º. If pattern follows aircap, problem is in aircap. Clean and inspect. If pattern is not corrected, replace aircap.
If pattern does not follow the aircap, the problem is with the fluid nozzle. Clean and inspect the nozzle. If the pattern in not corrected, replace nozzle.
WRONG Split pattern
Pressure too high for viscosity of material being sprayed
Reduce air pressure and increase material viscosity.
Correct pattern by narrowing fan size with spray width adjustment knob.
WRONG
Dirty or distorted air horn holes. Clean and inspect aircap. If pattern is not corrected, replace aircap.
Gun spitting
Air getting into paint stream. Check if cup is empty and fill if needed. Tighten fluid nozzle. Check and tighten needle packing nut. Check fluid nozzle for damage.
Will not spray
1) Cup is empty.
2) Fluid adjustment knob turned too far clockwise
1) Fill cup.
2) Adjust knob counterclockwise.
Excessive air blowing back
1) Loose fluid nozzle.
2) Damaged fluid nozzle seal.
1) Tighten fluid nozzle.
2) Replace seal.
WRONG Heavy pattern or orange peel
1) Air pressure too low.
2) Gun held too close to surface.
1) Increase air pressure.
2) Hold gun about 6-8 inches (15-200 mm) from surface.
Troubleshooting
www.sharpe1.com • 1-800-742-7731
www.sharpe1.com • 1-800-742-7731
Dryaire Membraneor Desiccant AirDrying system at
Paint Booth
15 ft to 20 ft
Compressor
Main Air Line 1 in.Pipe Minimum
Dryaire Membrane
Dryaire DesiccantRefrigerated
Air Dryer
Ball Valve
DrainLeg
Air Out
Air In
Air Filter
Oil Coalescer
Union
Air Control Unitor Air Filter
Flexible Hose between Compressor
and Main Air Line
13
Refrigerated Air Dryers Cool, Dry and Clean• Idealforbodyshopsandindustrialfacilities
• Noseparatecomponentstopipetogether
• Singleon/offswitch,faultlight
• Compactandhighlyefficientheatexchangers
This compact, easy-to-use package prevents surface blemishes and poor paint adhesion caused by compressed air humidity.
Ideal for shops and facilities with 5-15 horsepower compressors, the Dryaire system is easy to install, easy to maintain and environmentally safe. It offers compact, high efficientheatexchangers,two-stageseparator/filter,andareliable air operated condensate drain.
• InstructionManual:PN310884
Model
Use with Air Compressor Size
Flow Capacity
Power Requirements
Dimensions H" x W" x D"
Weight
Repair Kit
6880 5.0 - 7.5 HP 25 CFM 115/1/60 28 x 10 x 13 80 lb 39995
6885 10 HP 35 CFM 115/1/60 28 x 10 x 13 81 lb 39995
6890 15 HP 50 CFM 115/1/60 37 x 17 x 17 150 lb 39997
6895 20 HP 75 CFM 115/1/60 37 x 17 x 17 150 lb 39996
www.sharpe1.com • 1-800-742-7731
www.sharpe1.com • 1-800-742-7731
14
Dryaire Membrane SystemModel 6770
Advanced air drying technology for shop use. Lightweight, easy-to-install, and simple-to-operate, the Dryaire MembraneSystemmaintains–40°Fdewpointwhileachieving 0% compressed air humidity. It removes oil and sub-micron particles down to .01 micron.
• Stage1filterprovidesremovalofwaterandcontaminants down to 5 microns
• Stage2coalescerprovidesremovalofoiland sub-microns particles down to .01 microns
• Stage3membranedryerismaintenancefree, no regeneration required
PN Description6770 Membrane System
22645 Stage 1 Replacement Filter Element
U23075 Stage 2 Replacement Coalescer Element
1-6770-3 Stage 3 Replacement Membrane
RAZOR HVLP 1.4 mmPN 253434 (pg. 2)
RAZOR PrimerPN 253438 (pg. 7)
RAZOR MetallicPN 289215 (pg. 3)
Finex 1.0PN 289200 (pg. 9)
• InstructionManual:PN310596
• ReferencePage#:42
Stage 1 Stage 2 Stage 3Air Inlet, NPT 1/2" 1/2" 1/2"
Air Outlet, NPT 1/2" 1/2" 1/2"
Air Flow Capacity 115 CFM (3.2 m3/min) 70 CFM (2.0 m3/min) 30 CFM (0.85 m3/min)
Max. Operating Pressure 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar)
Max. Temperature 150ºF (65ºC) 150ºF (65ºC) 175ºF (79ºC)
www.sharpe1.com • 1-800-742-7731
Note: For the overnight drain to operate, turn off the air pressure.
15
www.sharpe1.com • 1-800-742-7731
Quickremoveflange
Built-in screenpreventsdesiccant fromgoing down tubeon refill
Blue Silica GelDesiccant beadsturn pink whensaturated
Sintered Bronze Elementprevents any Desiccantdust from travelingdownstream
Built in sightglass allowseasy monitoring of desiccantcolor change
Dryaire Desiccant SystemModel 6760
Remove dirt, water, oil and uncondensed moisture from compressed air lines. The Dryaire Desiccant System’s 100% indicating silica gel provides maximum moisture absorption. It features easy desiccant change out, regenerate, or replacement (6765-1) and changes color when saturated. Thissystemmaintains–40°Fdewpointwhileachieving0%compressed air humidity.
• Stage1Airfilterincludesautodrain(overnight) and 5-micron filter
• Stage2Coalescerwithautodrain(overnight) removes oil particles down to .01 micron
• Stage3DesiccantHousing,30cfmcapacity
• Self-relievingairregulators,mountingbracket, and shut-off valve included
PN Description6760 Desiccant systems includes desiccants
22645 Stage 1 Filter Element
22655 Stage 2 Coalescer Element
6765-1 Stage 3, 5 lbs. replacement desiccant beads, 100% Silica Gel Desiccant
289534 Stage 3, replacement premium cobalt-chloride free silica gel
• InstructionManual:PN310595
• ReferencePage#:43-44
Stage 1 Stage 2 Stage 3Air Inlet, FPT 1/2" 1/2" 3/4"(reducedto1/2")
Air Outlet, FPT 1/2" 1/2" 3/4"(reducedto3/8")
Air Flow Capacity 108 CFM (3 m3/min) 35 CFM (1 m3/min) 30 CFM (0.85 m3/min)
Max. Operating Pressure 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar)
Max. Temperature 150ºF (65ºC) 150ºF (65ºC) 150ºF (65ºC)
Note: For the overnight drain to operate, turn off the air pressure.
16
www.sharpe1.com • 1-800-742-7731
Air FiltersContamination Elimination
Model F88 Air Filter
Model F88M Mechanic’s Air Filter
Model 606 Air Filter
• 5micronfiltration
• AirInletSize:1/2"NPT
• AirOutletSize:3/8"NPTand 1/4"NPTplugged
• Max.OperatingPressure: 160 psi (11.0 bar)
• FilterCapacity:75cfm
• InstructionManual:PN310603
• ReferencePage:45,47
• 5micronfiltration
• AirInletSize:1/4"NPT
• AirOutletSize:1/4"NPTand 1/4"NPTplugged
• Max.OperatingPressure: 160 psi (11.0 bar)
• FilterCapacity:75cfm
• InstructionManual:PN310603
• ReferencePage:45
• 5micronfiltration
• AirInletSize:1/4"NPT
• AirOutletSize:1/4"NPTand 1/4"NPTplugged
• Max.OperatingPressure: 160 psi (11.0 bar)
• FilterCapacity:120cfm
• InstructionManual:PN310601
• ReferencePage:46
Model F88 Air Filter is highly effective at removing water, oil & contamination. It protects air cylinders and air tools and features a reusable edge-type filter element.
Model F88M Mechanic’s Air Filter is designed for the mechanic who wants to protect their investment in air tools. This unit is portable and easily mounts anywhere. It is designed for use with quick couplers.
The Model 606 Air Filter is most effective at removing water, oil & contamination. Its features include a large, reusable, edge-type filter element.
PN
Description
8130 Air filter, 75 cfm
U32719 Replacement filter element
PN
Description
8135 Air filter with quick connect, 75 cfm
U32719 Replacement filter element
PN
Description
UO6710 Air filter, 120 cfm
19930 Replacement filter element
17
www.sharpe1.com • 1-800-742-7731
In-Line Filters & CoalescersFilter and Drain
705FC ½" In-Line Filter & Coalescer with Overnight Drains
707C ¾" In-Line Coalescer with Overnight Drain
707F ¾" In-Line Filter with Overnight Drain
• .01micronfiltration
• AirFlowCapacity:70cfm(2m3/min)
• AirInlet:1/2"NPT
• AirOutlet:1/2"NPT
• MaxTemperature:150ºF(65ºC)
• Max.OperatingPressure: 175 psi (1.2 MPa, 12 bar)
• InstructionManual:PN310611
• ReferencePage:49
• .01micronfiltration
• AirFlowCapacity:115cfm(3m3/min)
• AirInlet:3/4"NPT
• AirOutlet:3/4"NPT
• MaxTemperature:150ºF(65ºC)
• Max.OperatingPressure: 175 psi (1.2 MPa, 12 bar)
• InstructionManual:PN310609
• ReferencePage:49
• 5micronfiltration
• AirFlowCapacity: 300 cfm (8.4 m3/min)
• AirInlet:3/4"NPT
• AirOutlet:3/4"NPT
• MaxTemperature:150ºF(65ºC)
• Max.OperatingPressure: 175 psi (1.2 MPa, 12 bar)
• InstructionManual:PN310611
• ReferencePage:49
Prevents fish-eyes by removing water, oil & contamination without the use of desiccant. Designedforuseinprepstationsandair/finishingareas.Stage 1 provides removal of water and contaminants down to 5 microns. Stage 2 provides removal of oil and sub-micronic particles down to .01 microns.
The 707C effectively traps fine oil mists and microscopic particles to .01 microns. Recommended for use down stream of a refrigerated air dryer. Contains spin-off bowl for quick filter changes without tools. Includes pressure drop indicator.
The 707F removes oil and water contamination. Disassemble and clean the filter without tools. Features a large reusable filter element.
PN
Description
6910 In-Line filter and coalescer
22645 Stage 1 Replacement Filter Element
22655 Stage 2 Replacement Coalescer Element
PN
Description
6930 In-Line coalescer with auto drain
U23085 Replacement Coalescer Element
PN
Description
6920 In-Line filter with auto drains
U23080 Replacement Filter Element
18
www.sharpe1.com • 1-800-742-7731
Air Control UnitsProtection
880A Air Control Unit
606B Air Control Unit
606C Air Control Unit
606A Air Control Unit
• 5micronfiltration
• AirInletSize:1/2"NPT(f)
• AirOutletSize:3/8"NPT(f)and 1/4"NPT(f)plugged
• Max.OperatingPressure:200psi(13.6bar)
• FilterCapacity:75cfm
• RegulatorCapacity:50cfm
• InstructionManual:PN310603
• ReferencePage:48
• 5micronfiltration
• AirInletSize:1/2"NPT
• AirOutletSize:1/4"NPT
• Max.OperatingPressure:200psi(13.6bar)
• FilterCapacity:120cfm
• RegulatorCapacity:50cfm
• InstructionManual:PN310601
• ReferencePage:45
• 5micronfiltration
• AirInletSize:1/2"NPT
• AirOutletSize:1/4"NPT
• Max.OperatingPressure:160psi(13.6bar)
• FilterCapacity:120cfm
• InstructionManual:PN310601
• ReferencePage:45
• 5micronfiltration
• AirInletSize:1/2"NPT
• AirOutletSize:1/4"NPT
• Max.OperatingPressure:200psi(13.6bar)
• FilterCapacity:120cfm
• RegulatorCapacity:50cfm
• InstructionManual:PN310601
• ReferencePage:45
Highly effective at removing water, oil and contamination to protect air cylinders and air tools. Contains 18C-3R Regulator with a 160 lb inverted gauge and air cock. Regulated outlet and filtered main line outlet included.
Effective at removing water, oil and contamination to protect air cylinders and air tools. Contains 18C-3R Regulator with a 160 lb inverted gauge and air cock. Regulated outlet and filtered main line outlet with 200 lb gauge included.
Effective at removing water, oil and contamination to protect air cylinders and air tools. Contains two 18C-3R Regulators with a 160 lb inverted gauge and air cock. Two regulated outlets and a filtered main line outlet with 200 lb gauge included.
Effective at removing water, oil and contamination to protect air cylinders and air tools. Contains 18C-3R Regulator with a 160 lb inverted gauge and air cock. Regulated outlet and filtered main line outlet included.
PN
Description
6950 Air Control Unit, 75 cfm
U32719 Replacement filter element
PN
Description
6730 Air Control Unit, 120 cfm
19930 Replacement filter element
PN
Description
6740 Model 606C Air Control Unit
19930 Replacement Filter Element
PN
Description
UO6720 Air Control Unit, 120 cfm
19930 Replacement filter element
19
www.sharpe1.com • 1-800-742-7731
RegulatorsPressure Regulation
16C-MR Mini Regulator
18B-500 and 18C-500 Air Regulator Assembly
18B-2R and 18C-2R Air Regulators
• AirInlet:1/4"npsm(f)
• AirOutlets(swivelnut): 1/4"npsm(f)
• AirFlowCapacity:22cfm
• InstructionManual:PN310605
• ReferencePage#:48
• AirInlet:3/8"npsm(f)
• AirOutlets(2):1/4"npsm(f)
• AirFlowCapacity:50cfm
• InstructionManual:PN310605
• AirInlet:3/8"npsm(f)
• AirOutlets(3):1/4"npsm(f)
• AirFlowCapacity:50cfm
• InstructionManual:PN310605
• ReferencePage#:46
This small, lightweight unit attaches to any spray gun, including HVLP, for accurate air pressure regulation. It is a true diaphragm regulator with push-pull lock pressure setting and easy-to-read 0-160 psi gauge.
50 CFM air regulator with an air gauge and air cock.
50 CFM air regulator.
PN
Description
1410 Mini Regulator
PN
Description
1620 Uses a 18B-2R regulator
1640 Uses a 18B-3R regulator
PN
Description
1610 Two regulated outlets, one main line outlet
1630 Three regulated outlets, one main line outlet
www.sharpe1.com • 1-800-742-7731
20
AccessoriesCup Assemblies
M6C125 Aluminum Mini Gravity CupPN UO7505• 4ozcapacity(125cc)• Threadsize1/8"npsm(m)• Lidassembly(PN34800)• Adapter(PN37065) Adapter for mini cup used on larger gun models• InstructionManual:PN310588
M6C190 Aluminum Mini Gravity CupPN 7506• 6ozcapacity(190cc)• Includesadaptortofitlargergunmodels(PN37065)• Threadsize1/8"npsm(m)• Lidassembly(PN34800)• InstructionManual:PN310588
Polished Aluminum Gravity Feed CupPN 253977• RAZORGravityFeedGuns• 23ozcapacity(650cc)• Rapidthreadsize5/8-11UNC2A• Lidassembly(PN22104)
Polished Aluminum Gravity Feed CupPN 253978• RAZORGravityFeedGuns• 34ozcapacity(1l)• Threadsize3/8"npsm(m)• Lidassembly(PN27404)
Aluminum Gravity Feed CupPN 6685• RAZORPrimergun&Legacyguns• 23ozcapacity(650cc)• Threadsize3/8"npsm(m)• Lidassembly(PN22104)
Aluminum Gravity Feed CupPN 6690• RAZORPrimergun&Legacyguns• 34ozcapacity(1l)• Threadsize3/8"npsm(m)• Lidassembly(PN27404)
Recommended for use with:
MGF HVLP •PN 7040 ............1.4 mm
MGF HVLP •PN 7040 ............1.4 mm
RAZOR Gravity Feed GunsLVLP•HVLP •Compliant•Conventional•Metallic•
RAZOR Gravity Feed GunsLVLP•HVLP •Compliant•Conventional•Metallic•
RAZOR Guns• 253437 ..............1.5 mm• 253438 ..............1.8 mm • 253439 ..............2.3 mm
RAZOR Guns• 253437 ..............1.5 mm• 253438 ..............1.8 mm • 253439 ..............2.3 mm
www.sharpe1.com • 1-800-742-7731
Finex Ultra Mini Aluminum Gravity CupPN 289517• 4ozcapacity(125cc)• FitsallFinex1000/2000/3000SeriesGuns
Finex Mini Aluminum Gravity CupPN 289321• 8ozcapacity(250cc)• FitsallFinex1000/2000/3000SeriesGuns
Finex Aluminum Gravity Feed CupPN 289320• 20ozcapacity(600cc)• FitsallFinex1000/2000/3000SeriesGuns
FX200/FX300AluminumGravityFeedCup
Siphon Cup AssemblyPN 6610• UsewithSiphonFeedGun• 1quartcapacity• Willnotdripwhensprayinginanyposition• Threadsize3/8"npsm(f)swivelnut• Noaccidentalspillsordamagedworkareas
21
www.sharpe1.com • 1-800-742-7731
AccessoriesCup Assemblies
FX100 Mini Aluminum Gravity Feed CupPN 15E422• 5ozcapacity(150cc)• GasketKitPN253418(qty5)• LidassemblyPN15F402
PN 15E449• 20ozcapacity(600cc)• GasketKitPN253417(qty5)• LidAssemblyPN15F403
www.sharpe1.com • 1-800-742-7731
22
AccessoriesCup Assemblies
Model D-500 Cup AssemblyPN UO7510• UsewithD-5-55DetailSprayGun• 6ozcapacity(190cc)• Threadsize1/4-18npsm(m)femaleswivel• Madeofhighdensitypolyethyleneconstruction
Model D-500-72 Extra Translucent Cup with CoverPN UO7530• UsewithD-5-55DetailSprayGun• 6ozcapacity(190cc)• Translucentcup• Includeslidforpaintstorage
3M™ PPS™ AdaptersPN 253975• PPSAdapterformostRAZORguns
PN 253969• PPSAdapterforRAZORPrimer&Legacyguns
PN 289520• PPSAdapterforFinexgunsFX1000/2000/3000Series
PPS Adapters
www.sharpe1.com • 1-800-742-7731
12AAV Air Adjusting ValvePN 1010• Precisiontaperedvalve• Startfromclosedtofullyopen
inapproximately4turns• Infinitelyadjustable
• Large,easy-to-handleknob• AirInlet¼"npsm• AirOutlets(swivelnut)¼"npsm
24AAVAirAdjustingValvewithGaugePN 2210• Precisiontaperedairadjusting
valve with heavy-duty pressure gauge reading up to 160 psi
• Startfromclosedtofullyopeninapproximately4turns
• Infinitelyadjustable• Large,easy-to-handleknob• UseonHVLPsprayguns• AirInlet¼"npsm• AirOutlets(swivelnut)¼"npsm
36AAV-HV High Volume Air Adjusting ValvePN 3310• EspeciallydesignedforHVLP,highvolumeairadjustingvalve• Includespressuregaugethatreadsupto160psi• AirInlet¼"npsm• AirOutlets(swivelnut)¼"npsm
Digi-tell™PN UO5510• Pressurerangeupto100psisupportsavarietyof
air consumption needs• Solventresistantforgunwash,basedonnormalusage• PSIorbarsetcapability• Long4-yearbatterylifebasedonnormalusagewithmotionsensing
display to conserve battery• Universal¼"npsmfittingfitmostspayguns• InstructionManual:PN31153A
H.O.V. High Output Precision Air Valve PN UO4410• Small,lightweightprecisionmeteringvalvethatattachestoany
HVLP spray gun for precision pressure setting for that gun• Easy-to-readfrom0-160psigauge• Fitsallleadingsprayguns
23
www.sharpe1.com • 1-800-742-7731
AccessoriesAir Adjusting Valves
24
www.sharpe1.com • 1-800-742-7731
AccessoriesAdditional Accessories
Hose Accessories
Low Pressure Cup AssemblyPN 6680• DesignedforusewithSharpepressurefeed• 1quartcapacity• Clamptypeassembly• Inlet3/8"npsm(f)swivelnut
• MaxPressure:10psi• CupAssembly(PN6610)• ReplacementGasket(PN20994)• Air1/4"NPS(m)• Orderwith6fthose(PN7130)
Model 70042-QuartPressureCupPN 7004• Forusewithanypressurefeedspraygunwhen
morethanonequartofmaterialisrequired.• Replacementgasket(PNU42002)• Widemouthforeasycleanup• Cuppressureregulatorallowsforfluidadjustment
from 0-50 psi
Hose Assemblies with Reusable Connectors
PN Description ID (in) Connectors - npsm (f)7110 6’ Air hose 5/16" 1/4"
7120 6’ Fluid hose 1/4" 3/8"
71306’ Hose kit for 2-qt Pressure Cup (includes one each 7110 & 7120 hoses)
7210 25’ Air hose 3/8" 1/4"
7220 25’ Fluid hose 3/8" 3/8"
7230 35"Airhosewithhigh-volumequickcouplers and connectors 3/8" 1/4"
High Volume Hose Connectors
PN Description8310 Highvolume1/4"femalequickcoupler
8320 Highvolume1/4"malequickcoupler
8330 Quickconnect1/4"female
8340 Quickconnect1/4"male
8310
8320
8330
8340
25
www.sharpe1.com • 1-800-742-7731
AccessoriesAdditional Accessories
Gravity Feed Spray Gun HolderPN 9894• Designedtoholduptofourguns• Mountsonwallortable
Gravity Feed Filling StationPN 9893• Designedtoholduptothreegunsinplacewhilefilling• Adjustablestrainerholder
F2 Disposable In-Line Filters• Installseasilyandreducespaintdefects• Disposablefilterremovescontaminantssuchasmoistureandoil
thatcondensesintheairhosebetweenthewallmountfilterandspray gun
PN 8100-DisposableFilterBlisterPack(2perpack) PN 8125 - Disposable Filter Dispenser (Jar of 25)
Spray Gun LubePN 8255-SprayGunLube(0.25oz,Packof6)• Keepyourspraygunoperatingsmoothly• Compatiblewithallpaintmaterials• Convenient,easytousespraygunlube• Siliconfree
SprayGunBrushKitPN 8260• Professionalbrushkiteffectivelycleansallmodelspray
gun including HVLP• Includesonespraygunlube
www.sharpe1.com • 1-800-742-7731
26
HowtoUseAskDr.GunThe Ask Doctor Gun knowledge database gives you the ability to search for answers to some commonly asked questions. If you don’t find what you’re looking for, simply “AskaQuestion”andyourrequestwillbeanswered the following business day or sooner. The optional “My Stuff” area tracks your questions, and allows you to search for previously asked questions in the database, as well as request notifications on specific answers when they are updated.
Get started right away by using any of the linksbelow:
* FindAnswers:Allresolvedproblemsarein the solution database.
* Search by product, category, keywords, or phrases.
* AskaQuestion:Submitaquestiontoourtechnical support staff who will reply to you by email.
* MyStuff:Logintocheckthestatusofyour questions, modify your answer, update notifications and update your personal profile.
If you haven’t tried Sharpe Spray Guns or other Sharpe products today, we hope you will. Please take some time and review our entire product line and then, if you have any questions, just pick up the phone and call 1-800-SHARPE1 or send us a note via Ask Doctor Gun.
How to Build an Entire Sharpe SystemIn order to set up an effective paint system, you need to ensure that you choose the proper compressor, correctly install the proper line size, and remove moisture and contaminates from your atomizing air.
Choosing the right compressor1. Makealistofallofyourairtools,i.e.guns/grinders/etc.
2. Determine the total CFM and psi requirements for all of your equipment
3. Add 25% for leakage and possible future equipment to determine final CFM and psi requirements.
Properlinesizingselectionandinstallation4. Install 5 feet of flexible hose from your compressor to your main
air line stand line
5. Main air line stand pipe should not be smaller than the compressor outlet size
6. We suggest using ¾ inches to 1 ¼ inches cooper or galvanized pipe for your main air line
7. To avoid moisture contamination, you will need 25 feet of main airline before your first outlet to allow for proper cooling of the compressed air — 50 feet is optimal.
8. Main line air pipe should be mounted to allow for 4 inches of drop per 50 feet to assure proper drainage.
9. One last suggestion is to route your drop line to the gun up then down (layout on page 28)
10. Close ball valve at each drop and drain the drops daily or weekly depending on the air conditions
Remove moisture and contaminates
Compressed Air Humidity (CAW) can cause your finish to have poor gloss, adhesion, durability and cloudiness in the finish, which leads to costly rework.
11. CAW can be measured using Sharpe’s 6760HT humidity tester.
12. To remove moisture and contaminates i.e. dirt, oil, etc., we suggest using the Sharpe 6910 with an air regulator. The 6910 is a simple two-stage system. The first stage is a 5 micron air filter and the second stage is a .01 micron coalescer. The air regulator assures proper air pressure to your gun at all times.
13. If moisture is still a problem, we suggest using one of our three stage systems, Sharpe’s 6760 Dryaire Desiccant system or the 6770 Dryaire Membrane system. These systems are similar to the 6910, butaddathirdstagethatwillmaintain0%humidityat–40°F.
14. We suggest shutting the main line air off at the end of the day to ensure the auto drains work properly.
15. It is a good practice to drain your compressor daily.
www.sharpe1.com • 1-800-742-7731
www.sharpe1.com • 1-800-742-7731
2727
Setting Up Your Garage to SprayCompressedAirPipelinePressureDropTable-InitialPressure7kg/cm2(100psi)Pressuredropsin100m(330ft)compressedairlinesareindicatedinthetablesbelow:
Volume Flow FADLine Size
1/2"15.788
3/4"20.93
1"26.645
1 1/4"35.052
1 1/2"40.894
(m3/min)0.10.20.30.40.50.60.70.80.91
1.21.41.61.82
2.22.42.62.83
3.54
4.55
5.56
6.57
7.58
8.59
9.51015
(cfm)571114182125283235424955647178859299105124141159177194212229247265282300318335353530
(kg/cm2)0.020.060.120.200.300.430.570.730.901.10
(psi)0.220.801.692.884.356.098.1010.3812.9015.68
(kg/cm2)
0.010.030.050.070.100.140.180.220.270.380.500.640.800.971.161.36
(kg/cm2)
0.010.010.020.030.040.050.070.080.110.150.190.240.290.350.410.470.540.610.821.051.30
(kg/cm2)
0.010.010.010.010.020.020.030.040.050.080.070.090.100.120.140.160.210.270.330.400.480.560.650.750.850.961.071.191.321.45
(kg/cm2)
0.010.010.010.010.020.020.030.030.040.050.060.060.070.100.120.150.190.220.260.300.350.390.440.500.550.610.671.42
(psi)
0.200.410.711.071.491.992.543.163.645.397.169.16
11.4013.8516.5219.40
(psi)
0.120.210.320.450.690.760.951.151.612.142.743.414.144.945.806.737.728.77
11.6614.9318.57
(psi)
0.080.110.150.190.240.290.410.540.700.871.051.251.471.711.962.232.963.794.715.736.638.029.3010.6712.1213.6615.2816.9918.7720.64
(psi)
0.090.110.130.190.250.320.400.490.580.690.790.911.031.371.752.182.653.163.714.304.945.616.327.077.868.699.56
20.22
www.sharpe1.com • 1-800-742-7731
28
www.sharpe1.com • 1-800-742-7731
Dryaire Membraneor Desiccant AirDrying system at
Paint Booth
15 ft to 20 ft
Compressor
Main Air Line 1 in.Pipe Minimum
Dryaire Membrane
Dryaire DesiccantRefrigerated
Air Dryer
Ball Valve
DrainLeg
Air Out
Air In
Air Filter
Oil Coalescer
Union
Air Control Unitor Air Filter
Flexible Hose between Compressor
and Main Air Line
A
E
C
D
B
Shop Air Piping LayoutRefrigerated Air Dryer & Dryaire System Layout
Dryaire Desiccant SystemSHOP AIR PIPING LAYOUT
UNION
UNION
FLEXIBLE HOSE BETWEEN COMPRESSOR & STAND PIPE
UNION
DRAIN LEG
DRYAIRE DESICCANTSYSTEM
606A
BALL VALVE
BALL VALVE
BALL VALVE
BALL VALVE
AIR HOSE SIZE5/16 MINIMUM3/8 OPTIMUM
AIR CONTROL UNITOR AIR FILTER
DRAIN DAILY
DRAIN DAILY
BALL VALVE
DRAIN DAILY
DRAIN AIR COMPRESSOR
DAILY IN THE A.M.
MAIN LINE PIPE SIZE3/4 IN. MINIMUM
1-1/4 IN. OPTIMUM
FOR PREP AREA707FC FILTER &
COALESCERWITH AUTO DRAINS
SLOPES DOWN AND AWAYRECOMMENDED 4 INCH DROP IN 50 FEET
(Copper or galvanized pipe is recommended.)
A MINIMUM OF 25 FT.TO FIRST OUTLET IS
REQUIRED TO COOL AIR(50 FT. OPTIMUM)
THE MAIN AIR LINE STANDPIPE SHOULD NOT BESMALLER THAN THE
COMPRESSOR OUTLET SIZE
Ref. Letter
Description
Model No.
A Sharpe 606 U06710
Sharpe 606A U06720
Sharpe 606B 6730
Sharpe 880A 6950
Sharpe F88 8130
B 707C 6930
707F 6920
707FC 6910
C Dryaire Membrane 6770
D Dryaire Desiccant 6760
E Refrigerated Air Dryer
25CFM 6880
35CFM 6885
50CFM 6890
75CFM 6895
29
REFERENCE
www.sharpe1.com • 1-800-742-7731
Titanium Part Numbers
RAZOR Part Numbers
RAZOR NozzleSize(mm)
RAZOR Spray Type
Feed System
4012 253432 1.2 HVLP Gravity
4013 253433 1.3 HVLP Gravity
4014 253434 1.4 HVLP Gravity
4015 253435 1.5 HVLP Gravity
4016* 253435 or 253436 1.5/1.7 HVLP Gravity
4017 253436 1.7 HVLP Gravity
4212 253441 1.2 Compliant Gravity
4213 253442 1.3 Compliant Gravity
4214 253443 1.4 Compliant Gravity
4215 288654 1.5 Compliant Gravity
4216 253444 1.6 Compliant Gravity
4217** 253444 1.6 Compliant Gravity
5485 287961 2.2 HVLP Siphon
Cross ReferenceNeed to replace your Titanium or Cobalt guns?
Simply determine the gun family, select the appropriate part number and then find the RAZOR part number reference. This is a suggested RAZOR alternative and is not an implied guarantee of the acceptability of the gun in all applications.
RAZORReplacementforTitanium
RAZORReplacementforCobalt
* RAZOR HVLP not offered in a 1.6 mm. We offer a 1.5 mm (253435) or a 1.7 mm (253436) ** RAZOR Compliant not offered in a 1.7 mm. We offer a 1.6 mm.
* RAZOR Conventional not offered in a 1.4 mm but 1.5 mm is offered. ** RAZOR Conventional not offered in a 2.3 mm but 2.5 mm is offered.*** RAZOR HVLP not offered in a 1.6 mm but 1.5 mm (253435) or a 1.7 mm (253436) is offered.
Cobalt Part Numbers
RAZOR Part Numbers
RAZOR NozzleSize(mm)
RAZOR Spray Type
Feed System
5222* 288291 1.5 Conventional Siphon
5224* 288291 1.5 Conventional Siphon
5235 288292 1.8 Conventional Siphon
5250** 288294 2.5 Conventional Siphon
5712 253441 1.2 Compliant Gravity
5714 253443 1.4 Compliant Gravity
5716 253444 1.6 Compliant Gravity
5812 253432 1.2 HVLP Gravity
5814 253434 1.4 HVLP Gravity
5815 253437 1.5 HVLP Primer Gravity
5816*** 253435 or 253436 1.5/1.7 HVLP Gravity
5818 253438 1.8 HVLP Primer Gravity
5823 253439 2.3 HVLP Primer Gravity
5866 287961 2.2 HVLP Siphon
CONVERSION CHART
30
REFERENCE
www.sharpe1.com • 1-800-742-7731
RAZOR HVLP
RAZOR Compliant
RAZOR HVLP-Siphon
RAZOR Compliant-Siphon
FINEX FX1000
FINEX FX2000
FINEX FX3000
MGF HVLP
MPF HVLP
Primers & Sealers
Nozzle Size mm 1.5 1.4 2.2 1.6-1.8 1.4 1.4 1.5 1.4 1.1
Gun PN 253437 (1.5 mm) 253443 (1.4 mm) 287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm)
289222 (1.4 mm) 288885 (1.4 mm) 288881 (1.5 mm) 7040 (1.4 mm)
7045 (1.1 mm)
Nozzle PN 253789 (1.5 mm) 253819 (1.4 mm) 253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm)
289290 (1.4 mm) 289293 (1.4 mm) 289299 (1.5 mm) 29021 (1.4 mm)
34811 (1.1 mm)
Aircap PN 253828 253825 253827 288454 Kit Kit Kit 34806 34808
Primer Surface
Nozzle Size mm 1.5 - 1.8 1.4-1.6 2.2 1.6-1.8 1.4 1.8 1.5-1.8
Gun PN 253437 (1.5 mm) 253438 (1.8 mm)
253443 (1.4 mm) 288654 (1.5 mm) 253444 (1.6 mm)
287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm)
289222 (1.4 mm) 288887 (1.8 mm) 288881 (1.5 mm) 288882 (1.8 mm)
Nozzle PN 253789 (1.5 mm) 253790 (1.8 mm)
253819 (1.4 mm) 288653 (1.5 mm) 253820 (1.6 mm)
253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm)
289290 (1.4 mm) 289295 (1.8 mm) 289299 (1.5 mm) 289300 (1.8 mm)
Aircap PN 253828 253825 253827 288454 Kit Kit Kit
Single Stage Urethane and Polyurethanes
Nozzle Size mm 1.2-1.5 1.3-1.5 2.2 1.6-1.8 1.2-1.4 1.4 1.3-1.5 1.1
Gun PN 253432 (1.2 mm) 253433 (1.3 mm) 253434 (1.4 mm) 253435 (1.5 mm)
253442 (1.3 mm) 253443 (1.4 mm) 288654 (1.5 mm)
287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm)
289221 (1.2 mm) 289222 (1.4 mm)
288885 (1.4 mm) 288879 (1.3 mm) 288880 (1.4 mm) 288881 (1.5 mm)
7045 (1.1 mm)
Nozzle PN 253793 (1.2 mm) 253794 (1.3 mm) 253795 (1.4 mm) 253796 (1.5 mm)
253818 (1.3 mm) 253819 (1.4 mm) 288653 (1.5 mm)
253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm)
289289 (1.2 mm)289290 (1.4 mm)
289293 (1.4 mm) 289297 (1.3 mm) 289298 (1.5 mm) 289299 (1.8 mm)
34811 (1.1 mm)
Aircap PN 253824 253825 253827 288454 Kit Kit Kit 34808
Base Coat
Nozzle Size mm 1.2-1.5 1.2-1.4 2.2 1.4-1.8 1.2-1.4 1.4 1.3-1.5 1.4 1.1
Gun PN 253432 (1.2 mm) 253433 (1.3 mm) 253434 (1.4 mm) 253435 (1.5 mm)
253441 (1.2 mm) 253442 (1.3 mm) 253443 (1.4 mm)
287961 (2.2 mm) 288288 (1.4 mm) 288289 (1.6 mm) 288290 (1.8 mm)
289221 (1.2 mm) 289222 (1.4 mm)
288885 (1.4 mm) 288879 (1.3 mm) 288880 (1.4 mm) 288881 (1.5 mm)
7040 (1.4 mm)
7045 (1.1 mm)
Nozzle PN 253793 (1.2 mm) 253794 (1.3 mm) 253795 (1.4 mm) 253796 (1.5 mm)
253817 (1.2 mm) 253818 (1.3 mm) 253819 (1.4 mm)
253778 (2.2 mm) 288304 (1.4 mm) 288305 (1.6 mm) 288306 (1.8 mm)
289289 (1.2 mm) 289290 (1.4 mm)
289293 (1.4 mm) 289297 (1.3 mm) 289298 (1.5 mm) 289299 (1.8 mm)
29021 (1.4 mm)
34811 (1.1 mm)
Aircap PN 253824 253825 253827 288454 Kit Kit Kit 34806 34808
Clear Coat
Nozzle Size mm 1.2-1.5 1.2-1.4 2.2 1.6-1.8 1.2-1.4 1.4 1.3-1.5 1.4 1.1
Gun PN 253432 (1.2 mm) 253433 (1.3 mm) 253434 (1.4 mm) 253435 (1.5 mm)
253441 (1.2 mm) 253442 (1.3 mm) 253443 (1.4 mm)
287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm)
289221 (1.2 mm) 289222 (1.4 mm)
288885 (1.4 mm) 288879 (1.3 mm) 288880 (1.4 mm) 288881 (1.5 mm)
7040 (1.4 mm)
7045 (1.1 mm)
Nozzle PN 253793 (1.2 mm) 253794 (1.3 mm) 253795 (1.4 mm) 253796 (1.5 mm)
253817 (1.2 mm) 253818 (1.3 mm) 253819 (1.4 mm)
253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm)
289289 (1.2 mm) 289290 (1.4 mm)
289293 (1.4 mm) 289297 (1.3 mm) 289298 (1.5 mm) 289299 (1.8 mm)
29021 (1.4 mm)
34811 (1.1 mm)
Aircap PN 253824 253825 253827 288454 Kit Kit Kit 34806 34808
SPRAY GUN REFERENCE GUIDE
31
REFERENCE
www.sharpe1.com • 1-800-742-7731
D-5-55 FINEX 100 FINEX 200 FINEX 300 Titanium Titanium CG Titanium Siphon
Titanium Pressure
Cobalt
Primers & Sealers
1.4 1.4 1.5 1.4-1.5 1.4-1.6 1.2 1.5-1.8
7030 (1.4 mm) 248753 (1.4 mm) 248757 (1.5 mm) 4014 (1.4 mm) 4015 (1.5 mm)
4214 (1.4 mm) 4216 (1.6 mm)
5462 (1.2mm) 5815L (1.5 mm) 5818L (1.8 mm)
29021 (1.4 mm) 15E424 (1.4 mm) 15E452 (1.5 mm) 41114 (1.4 mm) 41115 (1.5 mm)
41114 (1.4 mm) 41116 (1.6 mm)
41112 (1.2mm) 28115 (1.5 mm) 28188 (1.8 mm)
29006 15E423 15E450 41014 (1.4 mm) 41015 (1.5 mm)
41012 41020 28015
Primer Surface
1.8 1.5-1.8 1.6 1.2 1.8-2.3
248754 (1.8 mm) 248757 (1.5 mm) 248758 (1.8 mm)
4216 (1.6 mm) 5462 (1.2 mm) 28188 (1.8 mm) 28123 (2.3 mm)
15E425 (1.8 mm) 15E452 (1.5 mm) 15E425 (1.8 mm)
41116 (1.6 mm) 41112 (1.2 mm) 28015
15E423 15E450 41012 41020
Single Stage Urethane and Polyurethanes
1.4 1.3-1.5 1.5 1.6 0.8-1.2 1.6
248753 (1.4 mm) 248755 (1.3 mm) 248756 (1.4 mm) 248757 (1.5 mm)
4015 (1.5 mm) 4216 (1.6 mm) 5460 (0.8 mm) 5462 (1.2 mm)
5816L (1.6 mm)
15E424 (1.4 mm) 15E451 (1.3 mm) 15E424 (1.4 mm) 15E452 (1.5 mm)
41115 (1.5 mm) 41116 (1.6 mm) 41108 (0.8 mm) 41112 (1.2 mm)
28116 (1.6 mm)
15E423 15E450 41015 (1.5 mm) 41012 41020 28012
Base Coat
1.4 1.0 1.4 1.3-1.5 1.3-1.4 1.4-1.6 2.2 0.8-1.2 1.4-1.6
7030 (1.4 mm) 248752 (1.0 mm) 248753 (1.4 mm) 248755 (1.3 mm) 248756 (1.4 mm) 248757 (1.5 mm)
4013 (1.3 mm) 4014 (1.4 mm)
4214 (1.4 mm) 4216 (1.6 mm)
5485 (2.2 mm) 5460 (0.8 mm) 5490 (1.2 mm)
5418L (1.4 mm) 5816L (1.6 mm)
29021 (1.4 mm) 15E393 (1.0 mm) 15E424 (1.4 mm) 15E451 (1.3 mm) 15E424 (1.4 mm) 15E452 (1.5 mm)
41113 (1.3 mm) 41114 (1.4 mm)
41114 (1.4 mm) 41116 (1.6 mm)
41119 (2.2 mm) 41108 (0.8 mm) 41112 (1.2 mm)
28114 (1.4 mm) 28116 (1.6 mm)
29006 15E392 15E423 15E450 41013 (1.3 mm) 41014 (1.4 mm)
41012 41022 41020 28012
Clear Coat
1.4 1.0 1.4 1.3-1.5 1.3-1.4 1.4-1.6 0.8 1.4-1.6
7030 (1.4 mm) 248752 (1.0 mm) 248753 (1.4 mm) 248755 (1.3 mm) 248756 (1.4 mm) 248757 (1.5 mm)
4013 (1.3 mm) 4014 (1.4 mm)
4214 (1.4 mm) 4216 (1.6 mm)
5460 (0.8 mm) 5418L (1.4 mm) 5816L (1.6 mm)
29021 (1.4 mm) 15E393 (1.0 mm) 15E424 (1.4 mm) 15E451 (1.3 mm) 15E424 (1.4 mm) 15E452 (1.5 mm)
41113 (1.3 mm) 41114 (1.4 mm)
41114 (1.4 mm) 41116 (1.6 mm)
41108 (0.8 mm) 28114 (1.4 mm) 28116 (1.6 mm)
29006 15E392 15E423 15E450 41013 (1.3 mm) 41014 (1.4 mm)
41012 41020 28012
OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE
SPRAY GUN REFERENCE GUIDE
32
REFERENCE
www.sharpe1.com • 1-800-742-7731
Parts / Pièces / Piezas
22 311684D
Parts / Pièces / Piezas
TI8205
8‡
‡29
9
9a
7‡
5
*‡22‡31
*‡6*‡22
28*�
4
3* 23**
18**
21*11
20*�
1319*�
14
10**
30^
30a (sold separately)
^25
1
**24
17
*†16
*†15
Pull trigger before installing nozzle (11).
Insert spreader (15) with tapered end facing rear of gun. Insert u-cup (16) with open end facing front of gun.
Apply lubricant.
Apply low strength thread retainer.
Apply thread sealant.
Torque to 85-90 in-lbs.
Torque to 15-20 in-lbs.
Torque to 175-185 in-lbs.
Torque to 155-165 in-lbs.
Install with valve assembly turned fully CCW to outermost position.
1
2
3
4
5
6
7
8
9
10
95
106
83
4
610
8
91
3
33 2
3 2
8
7
33
3
4
Tirer sur la gâchette avant d’installer la buse (11).
Insérer l’écarteur (15) avec l’extrémité conique face vers l’arrière du pistolet. Insérer le joint calotte (16) avec la face ouverte face vers l’avant du pistolet.
Enduire de lubrifiant.
Appliquer un fixateur pour filetages léger.
Appliquer un produit d’étanchéité.
Serrer à 85-90 in.–lbs.
Serrer à 15-20 in.–lbs.
Serrer à 175-185 in.–lbs.
Serrer à 155-165 in.–lbs.
A monter avec l’ensemble de vanne tournée à fond dans le sens antihoraire.
1
2
3
4
5
6
7
8
9
10
Dispare el gatillo antes de instalar la boquilla (11).
Introduzca el esparcidor (15) con la parte biselada orientada hacia la parte trasera de la pistola. Introduzca la copela en U (16) con el extremo abierto orientado hacia la parte delantera de la pistola.
Aplique lubricante.
Aplique retén de roscas de poca fuerza.
Aplicar producto sellador para roscas.
Apriete a un par de 85-90 in-lbs.
Apriete a un par de 15-20 in-lbs.
Apriete a un par de 175-185 in-lbs.
Apriete a un par de 155-165 in-lbs.
Instalar con el conjunto de la válvula completamente girada en sentido antihorario, en la posición más extrema.
1
2
3
4
5
6
7
8
9
10
1 Pull trigger before installing nozzle (11).
2 Insert spreader (15) with tapered end facing rear of gun. Insert u-cup (16) with open end facing front of gun.
3 Apply lubricant.
4 Apply low strength thread retainer.
5 Apply thread sealant.
6 Torque to 85-90 in-lbs.
7 Torque to 15-20 in-lbs.
8 Torque to 175-185 in-lbs.
9 Torque to 155-165 in-lbs.
10 Install with valve assembly turned fully CCW to outermost position.
1 Tirer sur la gâchette avant d’installer la buse (11).
2 Insérer l’écarteur (15) avec l’extrémité conique face vers l’arrière du pistolet. Insérer le joint calotte (16) avec la face ouverte face vers l’avant du pistolet.
3 Enduire de lubrifiant.
4 Appliquer un fixateur pour filetages léger.
5 Appliquer un produit d’étanchéité.
6 Serrerà85-90in.–lbs.
7 Serrerà15-20in.–lbs.
8 Serrerà175-185in.–lbs.
9 Serrerà155-165in.–lbs.
10 A monter avec l’ensemble de vanne tournée à fond dans le sens antihoraire.
1 Dispare el gatillo antes de instalar la boquilla (11).
2 Introduzca el esparcidor (15) con la parte biselada orientada hacia la parte trasera de la pistola. Introduzca la copela en U (16) con el extremo abierto orientado hacia la parte delantera de la pistola.
3 Aplique lubricante.
4 Aplique retén de roscas de poca fuerza.
5 Aplicar producto sellador para roscas.
6 Apriete a un par de 85-90 in-lbs.
7 Apriete a un par de 15-20 in-lbs.
8 Apriete a un par de 175-185 in-lbs.
9 Apriete a un par de 155-165 in-lbs.
10 Instalar con el conjunto de la válvula completamente girada en sentido antihorario, en la posición más extrema.
REPLACEMENT PARTS DRAWINGS INDEX
RAZORGravityFeed
33
REFERENCE
www.sharpe1.com • 1-800-742-7731
Parts/Pièces/PiezasRef. No. Part No. Description Qty.1 BODY, gun 1
3* GASKET, fluid inlet 1
4 253971 FITTING, fluid inlet 1
253973 FITTING, fluid inlet (253437-39 only) 1
5 253976 VALVE, air control, assy 1
6*‡ VALVE, air, assy 1
7‡ NUT 1
8‡ KNOB, fluid adjust 1
9 page 2 NEEDLE (includes 9a) 1
9a page 2 TIP, needle 1
10** TRIGGER 1
11 page 2 NOZZLE (includes 21) 1
13 page 2 Aircap 1
14 253970 RING, retaining 1
15*† SPREADER, needle packing 1
16*† U-CUP, needle packing 1
17 253972 NUT, needle packing 1
18** WASHER, wave 1
19*u O-RING, PTFE 1
20*u WASHER, UHMWPE 1
21* O-RING, PTFE 1
22*‡ PACKING, u-cup 2
23** PIN, trigger 1
24** NUT, trigger 1
25^ FITTING, air inlet 1
28*_ WASHER, UHMWPE (not included on 253437-39) 1
29‡ SPRING, fluid 1
30^ PLUG, air inlet 1
30a 253979 VALVE, air inlet adjustment \(sold separately) 1
31‡ SPRING, air valve 1
32 253974 TOOL, gun (not shown) 1
36*‡ TOOL, seal installation (not shown) 1
37 253977 CUP, gravity, 650cc (not shown) 1
6685 CUP, gravity, 650cc (not shown,
253437-39 only)
37a 21719 FILTER, cup (not shown)
* Included in Gun Repair Kit 253783 (purchase separately).
** Included in Trigger Repair Kit 253785 (purchase separately).
† Included in Needle Packing Repair Kit 253748 (purchase separately).
‡ Included in Air Valve Repair Kit 253934 (purchase separately).
u Included in Aircap Seal Kit 253784 (purchase separately).
^ Included in Air Inlet Fitting Repair Kit 253933 (purchase separately).
_ Included in Gasket Kit 289213 (purchase separately).
* Compris dans le kit de réparation (253783) du pistolet (à acheter séparément).
** Compris dans le kit de réparation (253785) de la gâchette (à acheter séparément).
† Compris dans le kit de réparation (253748) de la garniture du pointeau (à acheter séparément).
‡ Compris dans le kit de réparation (253934) de la vanne d’air (à acheter séparément).
u Compris dans le kit (253784) de joint du chapeau d’air (à acheter séparément).
^ Compris dans le kit de réparation (253933) du raccord d’entrée d’air (à acheter séparément).
_ Compris dans le kit de joint 289213 (à acheter séparément).
* Incluido en el kit de reparación de la pistola 253783 (se adquieren por separado).
** Incluido en el Kit de reparación del gatillo 253785 (se adquiere por separado).
† Incluido en el Kit de reparación de las empaquetaduras de la aguja 253748 (se adquiere por separado).
‡ Incluido en el Kit de reparación de la válvula neumática 253934 (se adquiere por separado).
u Incluido en el Kit del sello del cabezal de aire 253784 (se adquiere por separado).
^ Incluido en el Kit de reparación del racor de entrada de aire 253933 (se adquiere por separado).
_ Incluído en el kit de juntas 289213 (se adquiere por separado).
REPLACEMENT PARTS DRAWINGS INDEX
34
REFERENCE
www.sharpe1.com • 1-800-742-7731
Parts / Pièces / Piezas
22 311685E
Parts / Pièces / Piezas
Pull trigger before installing nozzle (11).
Insert spreader (15) with tapered end facing rear of gun. Insert u-cup (16) with open end facing front of gun.
Apply lubricant.
Apply low strength thread retainer.
Apply thread sealant.
Torque to 85-90 in-lbs.
Torque to 15-20 in-lbs.
Torque to 175-185 in-lbs.
Torque to 155-165 in-lbs.
Install with valve assembly turned fully CCW to outermost position.
1
2
3
4
5
6
7
8
9
10
‡8
‡29
9
9a
7‡5
*‡22‡31 *‡6
*‡22
**24
1
23**
18**21*
1119*��
13�
*��20
14�
37
30a
^25
3*
2
410**
^30
17*†16*†15
3
4
8106
3
9
91
610
8
8
4 3 7
(sold separately)
3 2
3 2
3
3
3
108
101
102
103
105104
106105
107
9
TI8223a
Tirer sur la gâchette avant d’installer la buse (11).
Insérer l’écarteur (15) avec l’extrémité conique face vers l’arrière du pistolet. Insérer le joint calotte (16) avec la face ouverte face vers l’avant du pistolet.
Enduire de lubrifiant.
Appliquer un fixateur pour filetages léger.
Appliquer un produit d’étanchéité.
Serrer à 85-90 in.–lbs.
Serrer à 15-20 in.–lbs.
Serrer à 175-185 in.–lbs.
Serrer à 155-165 in.–lbs.
A monter avec l’ensemble de vanne tournée à fond dans le sens antihoraire.
1
2
3
4
5
6
7
8
9
10
Dispare el gatillo antes de instalar la boquilla (11).
Introduzca el esparcidor (15) con la parte biselada orientada hacia la parte trasera de la pistola. Introduzca la copela en U (16) con el extremo abierto orientado hacia la parte delantera de la pistola.
Aplique lubricante.
Aplique retén de roscas de poca fuerza.
Aplicar producto sellador para roscas.
Apriete a un par de 85-90 in-lbs.
Apriete a un par de 15-20 in-lbs.
Apriete a un par de 175-185 in-lbs.
Apriete a un par de 155-165 in-lbs.
Instalar con el conjunto de la válvula completamente girada en sentido antihorario, en la posición más extrema.
1
2
3
4
5
6
7
8
9
10
1 Pull trigger before installing nozzle (11).
2 Insert spreader (15) with tapered end facing rear of gun. Insert u-cup (16) with open end facing front of gun.
3 Apply lubricant.
4 Apply low strength thread retainer.
5 Apply thread sealant.
6 Torque to 85-90 in-lbs.
7 Torque to 15-20 in-lbs.
8 Torque to 175-185 in-lbs.
9 Torque to 155-165 in-lbs.
10 Install with valve assembly turned fully CCW to outermost position.
1 Tirer sur la gâchette avant d’installer la buse (11).
2 Insérer l’écarteur (15) avec l’extrémité conique face vers l’arrière du pistolet. Insérer le joint calotte (16) avec la face ouverte face vers l’avant du pistolet.
3 Enduire de lubrifiant.
4 Appliquer un fixateur pour filetages léger.
5 Appliquer un produit d’étanchéité.
6 Serrerà85-90in.–lbs.
7 Serrerà15-20in.–lbs.
8 Serrerà175-185in.–lbs.
9 Serrerà155-165in.–lbs.
10 A monter avec l’ensemble de vanne tournée à fond dans le sens antihoraire.
1 Dispare el gatillo antes de instalar la boquilla (11).
2 Introduzca el esparcidor (15) con la parte biselada orientada hacia la parte trasera de la pistola. Introduzca la copela en U (16) con el extremo abierto orientado hacia la parte delantera de la pistola.
3 Aplique lubricante.
4 Aplique retén de roscas de poca fuerza.
5 Aplicar producto sellador para roscas.
6 Apriete a un par de 85-90 in-lbs.
7 Apriete a un par de 15-20 in-lbs.
8 Apriete a un par de 175-185 in-lbs.
9 Apriete a un par de 155-165 in-lbs.
10 Instalar con el conjunto de la válvula completamente girada en sentido antihorario, en la posición más extrema.
REPLACEMENT PARTS DRAWINGS INDEX
RAZORSiphonFeed
35
REFERENCE
www.sharpe1.com • 1-800-742-7731
Ref. No. Part No. Description Qty.1 BODY, gun 1
2 27076 LOCK NUT, fluid inlet 1
3* GASKET, fluid inlet 1
4 27075 FITTING, fluid inlet 1
5 253976 VALVE, air control, assy 1
6*‡ VALVE, air, assy 1
7‡ NUT 1
8‡ KNOB, fluid adjust 1
9 page 2 NEEDLE (includes 9a) 1
9a page 2 TIP, needle 1
10** TRIGGER 1
11 page 2 NOZZLE (includes 21) 1
133 page 2 Aircap 1
143 253970 RING, retaining 1
15*† SPREADER, needle packing 1
16*† U-CUP, needle packing 1
17 253972 NUT, needle packing 1
18** WASHER, wave 1
19*u3 O-RING, PTFE 1
20*u3 WASHER, UHMWPE 1
21* O-RING, PTFE 1
22*‡ PACKING, u-cup 2
23** PIN, trigger 1
24** NUT, trigger 1
25^ FITTING, air inlet 1
28* WASHER, UHMWPE (not shown) 1
29‡ SPRING, fluid 1
30^ PLUG, air inlet 1
30a 253979 VALVE, air inlet adjustment (sold separately) 1
31‡ SPRING, air valve 1
32 253974 TOOL, gun (not shown) 1
36*‡ TOOL, seal installation (not shown) 1
37 6610 CUP, “No Drip”, siphon, assy 1
101 119120 CANISTER 1
102 119116 BRIDGE 1
103 119117 LEVER 1
104 21497 LID 1
105 119099 WASHER; 1.25 dia. 1
106 119100 GASKET, 3.5 dia. 1
107 118811 NUT, locking 1
108 119115 FLUID TUBE, assy 1
* Included in Gun Repair Kit 253783 (purchase separately).
** Included in Trigger Repair Kit 253785 (purchase separately).
† Included in Needle Packing Repair Kit 253748 (purchase separately).
‡ Included in Air Valve Repair Kit 253934 (purchase separately).
u Included in Aircap Seal Kit 253784 (purchase separately).
^ Included in Air Inlet Fitting Repair Kit 253933 (purchase separately).
3 Included in Aircap with Retaining Ring Kit (purchase separately). See page 2.
* Compris dans le kit de réparation (253783) du pistolet (à acheter séparément).
** Compris dans le kit de réparation (253785) de la gâchette (à acheter séparément).
† Compris dans le kit de réparation (253748) de la garniture du pointeau (à acheter séparément).
‡ Compris dans le kit de réparation (253934) de la vanne d’air (à acheter séparément).
u Compris dans le kit (253784) de joint du chapeau d’air (à acheter séparément).
^ Compris dans le kit de réparation (253933) du raccord d’entrée d’air (à acheter séparément).
3 Compris dans le kit de le chapeau d’air équipée de la bague de retenue (à acheter séparément). Voir page 2.
* Incluido en el kit de reparación de la pistola 253783 (se adquieren por separado).
** Incluido en el Kit de reparación del gatillo 253785 (se adquiere por separado).
† Incluido en el Kit de reparación de las empaquetaduras de la aguja 253748 (se adquiere por separado).
‡ Incluido en el Kit de reparación de la válvula neumática 253934 (se adquiere por separado).
u Incluido en el Kit del sello del cabezal de aire 253784 (se adquiere por separado).
^ Incluido en el Kit de reparación del racor de entrada de aire 253933 (se adquiere por separado).
3 Incluído en el kit del cabezal de aire con el anillo de retención (se adquiere por separado).Ver página 2.
Parts/Pièces/Piezas
REPLACEMENT PARTS DRAWINGS INDEX
36
REFERENCE
www.sharpe1.com • 1-800-742-7731
Finex1000/2000/3000SeriesParts/Pièces/Piezas
Ref. No. Description Qty.1 CAP, air 1
2 NOZZLE, fluid 1
3-1* PACKING, fluid needle 1
3-2* PACKING, fluid needle 1
4* NUT, packing 1
5* KNOB, pattern adjustment 1
6* O-RING 1
7* GUIDE, fluid needle 1
8-1* GUIDE, fluid adjusting 1
8-2* KNOB, fluid adjusting 1
9* SPRING, fluid needle 1
10 NEEDLE, fluid 1
11* O-RING 1
12-1 BODY, gun 1
12-2* DISTRIBUTOR, air 1
13* FITTING, air inlet 1
14* VALVE, air adjustment 1
15* RING, retaining 2
16* PIN, trigger 1
17* TRIGGER 1
18* SPRING, air valve 1
19* VALVE, air 1
20* SEAT, air valve 1
24* FILTER, fluid 1
26 CUP, gravity, aluminum 1
27 TOOL, gun (not shown) 1
Parts
8 312372B
Parts
Accessories
1 2
8-2910
8-11819207
43-2
5
15
1617
1413
12-1
ti10444a
12-2
Ref. Description Qty1 CAP, air 12 NOZZLE, fluid 13-1* PACKING, fluid needle 13-2* PACKING, fluid needle 14* NUT, packing 15* KNOB, pattern
adjustment1
6* O-RING 17* GUIDE, fluid needle 18-1* GUIDE, fluid adjusting 18-2* KNOB, fluid adjusting 19* SPRING, fluid needle 110 NEEDLE, fluid 111* O-RING 112-1 BODY, gun 112-2*DISTRIBUTOR, air 113* FITTING, air inlet 114* VALVE, air adjustment 115* RING, retaining 216* PIN, trigger 117* TRIGGER 118* SPRING, air valve 119* VALVE, air 120* SEAT, air valve 124* FILTER, fluid 126 CUP, gravity, aluminum 127 TOOL, gun (not shown) 1
116
24
26
3-1
Model
Needle/Nozzle
Size
Needle, Nozzle,Air Cap Kit
(Parts 1, 2, and 10)
Needle PackingKit (parts 3-1,
3-2, and 4)
Gun BodyKit
(part 12-1)
Gun RebuildKit (includes
parts marked *)
GravityCup
(aluminum)PPS
Adapter
FX 1000 Mini-HVLP
0.6 289286
288890 289314 288895
289517(125 cc)Standard
289321(250 cc)
2895200.8 2892871.0 2892881.2 2892891.4 289290
FX 2000 Conventional
1.0 289291
288891 289315 288896 289320(600 cc)
2895201.3 2892921.4 2892931.5 2892941.8 289295
FX 3000 HVLP
1.0 289296
288891 289315 288896 289320(600 cc)
2895201.3 2892971.4 2892981.5 2892991.8 289300
AccessoriesModel Needle/
Nozzle Size
Needle,Nozzle, AircapKit (Parts 1, 2, and 10)
NeedlePackingKit(parts3-1,3-2,and4)
GunBodyKit(part 12-1)
GunRebuildKit(includes parts marked*)
Gravity Cup (aluminum)
PPS Adapter
FX 1000 Mini-HVLP
0.6 289286 288890 289314 288895 289517 (125 cc) Standard 289321 (250 cc)
2895200.8 2892871.0 2892881.2 2892891.4 289290
FX 2000 Conventional
1.0 289291 288891 289315 288896 289320 (600 cc)
2895201.3 2892921.4 2892931.5 2892941.8 289295
FX 3000 HVLP
1.0 289296 288891 289315 288896 289320 (600 cc)
2895201.3 2892971.4 2892981.5 2892991.8 289300
REPLACEMENT PARTS DRAWINGS INDEX
37
REFERENCE
www.sharpe1.com • 1-800-742-7731
Finex1000/2000/3000SeriesTechnical Data
Maximum Air Inlet Pressure ...................................... 100 psi (0.7 MPa, 7 bar)
Maximum HVLP Inbound Air Pressure ........................ 29 psi (0.2 MPa, 2 bar)*
Air Consumption
FX1000 .................................... 7.0 SCFM at 29 psi (0.2 MPa, 2.0 bar)
FX2000 ..................................... 9.5 SCFM at 43 psi (0.3 MPa, 3.0 bar)
FX3000 ..................................... 9.5 SCFM at 29 psi (0.2 MPa, 2.0 bar)
Fluid and Air Operating Temperature Range ..................... 32-109°F(0-43°C)
Spray Gun
Air Inlet Size .........................................................1/4npsm(R1/4-19)
FX1000 Weight with cup ................................................0.9 lb (0.4 kg)
FX2000/3000Weightwithcup .......................................1.1 lb (0.5 kg)
Wetted Parts ............................. Aluminum, stainless steel, engineered plastic
Noise Data**
FX1000 sound pressure at 29 psi (0.2 MPa, 2.0 bar) ........ 78.17 dB(A) sound power at 29 psi (0.2 MPa, 2.0 bar) ......................... 85.32 dB(A)
FX2000 sound pressure at 43 psi (0.3 MPa, 3.0 bar) ......... 81.91 dB(A) sound power at 43 psi (0.3 MPa, 3.0 bar) ......................... 89.23 dB(A)
FX3000 sound pressure at 29 psi (0.2 MPa, 2.0 bar) ......... 80.60 dB(A) sound power at 29 psi (0.2 MPa, 2.0 bar) ......................... 87.74 dB(A)
Gravity Cup Sizes
FX1000 aluminum .................................... 4 oz (125 cc); 8 oz (250 cc)
FX2000/3000aluminum ...............................................20 oz (600 cc)
* Produces 10 psi (0.07 MPa, 0.7 bar) spraying pressure at aircap.** All readings were taken with the fan valve fully open (fan full size) at the assumed operator position. Sound power measured per ISO 9614-2.
REPLACEMENT PARTS DRAWINGS INDEX
38
REFERENCE
www.sharpe1.com • 1-800-742-7731
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.com
309989C, 4/2006
MGFHVLP GRAVITY FEED SYSTEM
Parts
Ref. No. Part No. Description Qty.1 34801 Gun Body 12 34825 Air Valve Assembly
Includes items 2a-2f1
2a 34819 • Housing 12b* 29049 • Air Valve Stem 12c 29053 • Lock Nut 12d* 29050 • Ball2e* 29036 • Needle Spring 12f* 34823 • Retainer 13 29033 Needle Packing Nut 14* 26022 Needle Packing 15* 29047 Plunger 16 29036 Needle Spring 17 29046 Fluid Control Knob 18* 29056 Trigger Screw 19 29055 Trigger 111 29030 Width Control Assembly
Includes items 11a-11d1
11a 118749 • Knob 111b 118741 • Packing Nut 111c* 29028 • Packing 111d* 29029 • Retaining Ring 112 119288 Fluid Needle Assembly
Includes items 12a-12b1
12a 34814 • Fluid Nozzle 112b 29041 • Fluid Needle 113 34806 Air Cap 1
11a
17a
11b
11c*
11d*
11
16
13
8*
95*
4*4* 3
2c
2b*
2d*
2e*
2f*
2
1415
12a 1
6
12b 7
2a
17
14 34831 Fluid Gasket 115 34830 Fluid Inlet Fitting 116 34832 90° Street Elbow 117 U07505 Gravity Cup; Includes item 17a 117a 34800 • Cup Lid 1
* Parts included in Repair Kit 34835.
Ref. No. Part No. Description Qty.
Ref. No. Part No. Description Qty.1 34801 Gun Body 1
2 34825 Air Valve Assembly Includes items 2a-2f 1
2a 34819 •Housing 1
2b* 29049 •AirValveStem 1
2c 29053 •LockNut 1
2d* 29050 •Ball
2e* 29036 •NeedleSpring 1
2f* 34823 •Retainer 1
3 29033 Needle Packing Nut 1
4* 26022 Needle Packing 1
5* 29047 Plunger 1
6 29036 Needle Spring 1
7 29046 Fluid Control Knob 1
8* 29056 Trigger Screw 1
9 29055 Trigger 1
11 29030 Width Control Assembly Includes items 11a-11d 1
11a 118749 •Knob 1
11b 118741 •PackingNut 1
11c* 29028 •Packing 1
11d* 29029 •RetainingRing 1
Ref. No. Part No. Description Qty.12 119288 Fluid Needle Assembly Includes items 12a-12b 1
12a 29021 •FluidNozzle 1
12b 29041 •FluidNeedle 1
13 34806 Aircap 1
14 34831 Fluid Gasket 1
15 34830 Fluid Inlet Fitting 1
16 34832 90°StreetElbow 1
17 U07505 Gravity Cup; Includes item 17a 1
17a 34800 •CupLid 1
* Parts included in Repair Kit 34835.
REPLACEMENT PARTS DRAWINGS INDEX
MGFHVLP Gravity Feed SystemParts/Pièces/Piezas
39
REFERENCE
www.sharpe1.com • 1-800-742-7731
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.com
309990C, 4/2006
MPFHVLP SPRAY GUN
Parts
Ref. No. Part No. Description Qty.1 34802 Gun Body 12 34825 Air Valve Assembly
Includes items 2a-2f1
2a 34819 • Housing 12b* 29049 • Air Valve Stem 12c 29053 • Lock Nut 12d* 29050 • Ball2e* 29036 • Needle Spring 12f* 34823 • Retainer 13 29033 Needle Packing Nut 14* 26022 Needle Packing 15* 29047 Plunger 16 29036 Needle Spring 17 29046 Fluid Control Knob 18* 29056 Trigger Screw 19 29055 Trigger 111 29030 Width Control Assembly
Includes items 11a-11d1
11a 118749 • Knob 111b 118741 • Packing Nut 111c* 29028 • Packing 111d* 29029 • Retaining Ring 112 118956 Fluid Needle Assembly
Includes items 12a-12b1
11a
13
11b
11c*
11d*
11
16
8*
95*
12b 7
4*4* 3
2b*2c
2a
2d*
2e*
2f*
2
12a
12a 34811 • Fluid Nozzle 112b 29040 • Fluid Needle 113 34808 Air Cap 1
* Parts included in Repair Kit 34835.
Ref. No. Part No. Description Qty.
Ref. No. Part No. Description Qty.1 34802 Gun Body 1
2 34825 Air Valve Assembly Includes items 2a-2f 1
2a 34819 •Housing 1
2b* 29049 •AirValveStem 1
2c 29053 •LockNut 1
2d* 29050 •Ball
2e* 29036 •NeedleSpring 1
2f* 34823 •Retainer 1
3 29033 Needle Packing Nut 1
4* 26022 Needle Packing 1
5* 29047 Plunger 1
6 29036 Needle Spring 1
7 29046 Fluid Control Knob 1
8* 29056 Trigger Screw 1
9 29055 Trigger 1
11 29030 Width Control Assembly Includes items 11a-11d 1
11a 118749 •Knob 1
11b 118741 •PackingNut 1
11c* 29028 •Packing 1
11d* 29029 •RetainingRing 1
Ref. No. Part No. Description Qty.12 118956 Fluid Needle Assembly Includes items 12a-12b 1
12a 34811 •FluidNozzle 1
12b 29040 •FluidNeedle 1
13 34808 Aircap 1
* Parts included in Repair Kit 34835.
REPLACEMENT PARTS DRAWINGS INDEX
MPFHVLP Spray GunParts/Pièces/Piezas
40
REFERENCE
www.sharpe1.com • 1-800-742-7731
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.com
309991C, 4/2006
D-5-55 DETAIL SPRAY GUN
Parts
Part No. 7030, D-5-55 Detail Spray Gun
Ref. No. Part No. Description Qty.1 29001 Gun Body 12 29054 Air Valve Assembly
Includes items 2a-2f1
2a 34819 • Housing 12b* 29049 • Air Valve Stem 12c 29053 • Lock Nut 12d* 29050 • Ball2e* 29036 • Needle Spring 12f* 29052 • Retainer 13 29033 Needle Packing Nut 14* 26022 Needle Packing 15* 29047 Plunger 16* 29036 Needle Spring 17 29046 Fluid Control Knob 18* 29056 Trigger Screw 19 29055 Trigger 110 29030 Width Control Assembly
Includes items 10a-10d1
10a 118749 • Knob 1
10a
13
10b
10c*
10d*
10
12 16*
8*
9
5*11 7
4*4* 3
2b*2c
2a
2d*
2e*
2f*
2
105
104
103
101102
Part No. U07510, D-500 Cup Assembly
10b 118741 • Packing Nut 110c* 29028 • Packing 110d* 29029 • Retaining Ring 111 29041 Fluid Needle 112 29021 Fluid Nozzle, 0.55 113 29006 Air Cap 1
* Parts included in Repair Kit 29086.
Ref. No. Part No. Description Qty.101 U07530 Cup with air-tight cover 1102 29063 Gasket, pack of 5 1103 29062 Lid with Fluid Tube 1104 29057 Coupling Nut 1105 29058 Nipple Fitting 1
Ref. No. Part No. Description Qty.Part No. 7030, D-5-55 Detail Spray Gun
Ref. No. Part No. Description Qty.1 29001 Gun Body 1
2 29054 Air Valve Assembly Includes items 2a-2f 1
2a 34819 •Housing 1
2b* 29049 •AirValveStem 1
2c 29053 •LockNut 1
2d* 29050 •Ball
2e* 29036 •NeedleSpring 1
2f* 29052 •Retainer 1
3 29033 Needle Packing Nut 1
4* 26022 Needle Packing 1
5* 29047 Plunger 1
6* 29036 Needle Spring 1
7 29046 Fluid Control Knob 1
8* 29056 Trigger Screw 1
9 29055 Trigger 1
10 29030 Width Control Assembly Includes items 10a-10d 1
Ref. No. Part No. Description Qty.10a 118749 •Knob 1
10b 118741 •PackingNut 1
10c* 29028 •Packing 1
10d* 29029 •RetainingRing 1
11 29041 Fluid Needle 1
12 29021 Fluid Nozzle, 0.55 1
13 29006 Aircap 1
* Parts included in Repair Kit 29086.
Part No. U07510, D-500 Cup AssemblyRef. No. Part No. Description Qty.101 U07530 Cup with air-tight cover 1
102 29063 Gasket, pack of 5 1
103 29062 Lid with Fluid Tube 1
104 29057 Coupling Nut 1
105 29058 Nipple Fitting 1
D-5-55 Detail Spray GunParts/Pièces/Piezas
REPLACEMENT PARTS DRAWINGS INDEX
41
REFERENCE
www.sharpe1.com • 1-800-742-7731
THE SPRAY GUN PEOPLE
MODEL 775 SPRAY GUN
775 SERIES
SEE OTHER SIDE FOR PART DESCRIPTION AND MODELS AVAILABLE
310587B
250922503225076
25074
16169
25036 SEE NOZZLE CHART
24997
25094
2509616139
16175
10332
10333
25048
24995
1616725066
16151
1616216147
1616316147
34940
16153
34941
25042
1032616100SEE NOZZLE CHART
16163
SERVICE KIT 25196
Part No. Description 10326 Head Attachment Gasket Fluid Needle Assy
10332 Trigger Shaft
24995 Air Valve Assembly
10333 Trigger Screw
24997 Spray Width Adjuster Assy.
16100 Tip Gasket
25032 Fluid Needle Spring Aircap
25036 Gun Handle Fluid Tip
25042 Gun Head
16139 Spray Width Control Packing
25048 Trigger
16147 Packing Nut
25066 Air Valve
16151 Air Valve Cage
25074 Air Inlet Nipple
16153 Head Attachment Screw
25076 Material Control Bushing
16162 Air Valve Packing
25092 Material Control Knob
16163 Air Valve Cage Gasket
Part No. Description 25094 Spray Width Control Knob & Valve
16163 Mat. Control Bushing Gasket
25096 Spray Width Control Body
16167 Air Valve Spring
34940 Packing
16169 Plug
34941 Packing Seal
16175 Spray Width Control “E” Clip
Model 775 Spray GunParts/Pièces/Piezas
REPLACEMENT PARTS DRAWINGS INDEX
42
REFERENCE
www.sharpe1.com • 1-800-742-7731
Part No. Description 22631 Overnight Drain
22632 Mounting Bracket
22638 O-Ring
22640 Baffle Kit
22645 Filter Element
Part No. Description 22631 Overnight Drain
22632 Mounting Bracket
22647 O-Ring
22650 Pop-up Indicator Repair Kit
U23075 Coalescer Element
DRYAIRE MEMBRANE AIR DRYING SYSTEM
3
Air Filter w/Overnight Drain(Part No. 22601)MaintenanceTo maintain maximum filtering efficiency and to avoid excessive pressure drop, the filter must be kept clean. Bowl drainage is automatic with the overnight drain; however, manual draining can also be done by removing the bowl. A visible coating of dirt on the filter element surface or an excessive pressure drop is an indication that cleaning is necessary.
CleaningTo clean, it is not necessary to remove the complete fil-ter from the line. Disassembly is simple and does not require tools. Before disassembly, shut off the air supply and depressurize filter. Clean all parts with cleaning sol-vent and blow out filter body before reassembly. Wash filter element in cleaning solvent and blow out from the inside.
Overnight DrainThe overnight drain (part no. 22631) is simple in design and operation. When the filter bowl is pressurized, the piston travels down against the spring and closes the drain opening. When the bowl is depressurized (i.e.: overnight when system is shut down), the spring lifts the piston from the seal allowing the bowl to drain.
NOTE: The overnight drain can be operated manually at anytime by pushing the piston stem up.
Parts
Part No. Description22631 Overnight Drain22632 Mounting Bracket22638 O-Ring22640 Baffle Kit22645 Filter Element
22638
22645
22640
22631
push to manually drain
(open)
DRYAIRE MEMBRANE AIR DRYING SYSTEM
4
Coalescer w/Overnight Drain(Part No. 22605)InstallationIt is always recommended that a SHARPE air filter be installed upstream of the coalescing filter to remove 5 micron and larger size particles and separate large droplets of moisture from the air line.
MaintenanceNever let the liquid level in the bowl reach the base of the coalescing element.
CleaningTo clean, it is not necessary to remove the complete fil-ter from the line. Disassembly is simple and does not require tools. Before disassembly, shut off the air supply and depressurize coalescer. Clean all parts with clean-ing solvent and blow out body before reassembly. Replace coalescing element (part no. U23075).
Pressure Drop IndicatorThe differential pressure drop indicator on this unit is designed to provide early detection of a clogged coa-lescing filter element. As the filter element becomes clogged the red indicator will start to rise while air is flowing through the unit. When the pressure drop across the element reaches 10-12 psi (0.07-0.08 MPa, 0.7-0.8 bar) the red indicator will be in full view and the element should be replaced. Failure to replace the element when the pressure drop exceeds 10 psi (0.07 MPa, 0.7 bar) will affect your air quality and tool efficiency.
Overnight DrainThe overnight drain (part no. 22631) is simple in design and operation. When the filter bowl is pressurized, the piston travels down against the spring and closes the drain opening. When the bowl is depressurized (i.e.: overnight when system is shut down), the spring lifts the piston from the seal allowing the bowl to drain.
NOTE: The overnight drain can be operated manually at anytime by pushing the piston stem up.
Parts
Part No. Description22631 Overnight Drain22632 Mounting Bracket22647 O-Ring22650 Pop-up Indicator Repair KitU23075 Coalescer Element
22650
22647
U23075
22631
push tomanually drain
(open)
REPLACEMENT PARTS DRAWINGS INDEX
Model 6770 Dryaire Membrane Air Drying System
Air Filter with Overnight Drain Stage 1 - Part No. 22601
Coalescer with Overnight Drain Stage 2 - Part No. 22605
43
REFERENCE
www.sharpe1.com • 1-800-742-7731
Part No. Description 22631 Overnight Drain
22632 Mounting Bracket
22638 O-Ring
22640 Baffle Kit
22645 Filter Element
Part No. Description 22631 Overnight Drain
22632 Mounting Bracket
22647 O-Ring
22650 Pop-up Indicator Repair Kit
22655 Coalescer Element
DRYAIRE DESICCANT SYSTEM
4
Air Filter with Overnight Drain(Part No. 22601)
MaintenanceTo maintain maximum filtering efficiency and to avoid excessive pressure drop, the filter must be kept clean. Bowl drainage is automatic with the overnight drain, however, manual draining can also be done by removing the bowl. A visible coating of dirt on the filter element surface or an excessive pressure drop is an indication that cleaning is necessary.
CleaningTo clean, it is not necessary to remove the complete fil-ter from the line. Disassembly is simple and does not require tools. Before disassembly, shut off the air supply and depressurize filter. Clean all parts with cleaning sol-vent and blow out filter body before reassembly. Wash filter element in cleaning solvent and blow out from the inside.
Overnight DrainThe overnight drain is simple in design and operation. When the filter bowl is pressurized, the piston travels down against the spring and closes the drain opening. When the bowl is depressurized (i.e.: overnight when system is shut down), the spring lifts the piston from the seal allowing the bowl to drain.
NOTE: The overnight drain can be operated manually at anytime by pushing the piston stem up.
Parts
Part No. Description22631 Overnight Drain22632 Mounting Bracket22638 O-Ring22640 Baffle Kit22645 Filter Element
22638
22645
22640
22631
push to manually drain (open)
DRYAIRE DESICCANT SYSTEM
5
Coalescer with Overnight Drain(Part No. 22602)
InstallationIt is always recommended that a Sharpe air filter be installed upstream of the coalescing filter to remove 5 micron and larger size particles and separate large droplets of moisture from the air line.
MaintenanceNever let the liquid level in the bowl reach the base of the coalescing element.
CleaningTo clean, it is not necessary to remove the complete fil-ter from the line. Disassembly is simple and does not require tools. Before disassembly, shut off the air supply and depressurize coalescer. Clean all parts with clean-ing solvent and blow out body before reassembly. Replace coalescing element (part no. 22655).
Pressure Drop IndicatorThe differential pressure drop indicator on this unit is designed to provide early detection of a clogged coa-lescing filter element. As the filter element becomes clogged the red indicator will start to rise while air is flowing through the unit. When the pressure drop across the element reaches 10-12 psi (.07-.08 MPa, 0.7-0.8 bar) the red indicator will be in full view and the element should be replaced. Failure to replace the element when the pressure drop exceeds 10 psi (.07 MPa, 0.7 bar) will affect your air quality and tool efficiency.
Overnight DrainThe overnight drain (part no. 22631) is simple in design and operation. When the filter bowl is pressurized, the piston travels down against the spring and closes the drain opening. When the bowl is depressurized (i.e.: overnight when system is shut down), the spring lifts the piston from the seal allowing the bowl to drain.
NOTE: The overnight drain can be operated manually at anytime by pushing the piston stem up.
Parts
Part No. Description22631 Overnight Drain22632 Mounting Bracket22647 O-Ring22650 Pop-up Indicator Repair Kit22655 Coalescer Element
22650
22647
22655
22631
push to manually drain (open)
REPLACEMENT PARTS DRAWINGS INDEX
Model 6760 Dryaire Desiccant System
Air Filter with Overnight Drain Stage 1 - Part No. 22601
Coalescer with Overnight Drain Stage 2 - Part No. 22602
44
REFERENCE
www.sharpe1.com • 1-800-742-7731
DRYAIRE DESICCANT SYSTEM
7
I
Self-Relieving Air Regulator (Part No. 22604)
MaintenanceIf the air supply is kept clean, this regulator will provide long periods of uninterrupted service. Erratic regulator operation or loss of regulation is most always due to dirt in the diaphragm area and cleaning is in order.
CleaningDepressurize regulator, remove bottom plug, spring valve, and diaphragm. Clean parts with denatured alco-hol, wipe off seat and blow out body with compressed air. Reassemble parts as a unit and screw into regulator before tightening bottom plug Make sure disc is in cen-ter hole in body. Should regulator continue to malfunc-tion, obtain diaphragm/valve repair kit (part no. 22680) and replace parts provided.
22682
2268022685
SpecificationsAir Inlet 3/8 in. F.P.T. Air Outlet 1/4 in. F.P.T. (3 EA.)
Air Flow Capacity 100 cfm (2.8 m3/min.)Max. Operating Pressure 160 psi (1.1 MPa, 11 bar)Max. Temperature 150°F (65°C)
Parts
Part No. Description8320 Air Pressure Gauge10028 Plug22680 Diaphragm/Valve Repair Kit22682 T-Handle Adjusting Screw22685 Bottom Spring22687 3/8 in. x 3/8 in. Nipple34700 Outlet Valve
AIR REGULATOR (22604)
AIR PRESSURE GAUGE (8230)
NIPPLE (22687)
PLUG(10028)
OUTLET VALVE (34700)
Part No. Description Color 6765-1 5 lb Desiccant Blue when fresh Pink when saturated
22661 Flow Tube Assy
22663 O-Ring
22664 Gasket
22665 O-Ring
22667 Filter Element (2)
22670 O-Ring
22679 Sight Glass
Part No. Description 8320 Air Pressure Gauge
10028 Plug
22680 Diaphragm/ValveRepairKit
22682 T-Handle Adjusting Screw
22685 Bottom Spring
22687 3/8in.x3/8in.Nipple
34700 Outlet Valve
SpecificationsAirInlet3/8in.F.P.T.
AirOutlet1/4in.F.P.T.(3EA.)
AirFlowCapacity100cfm(2.8m3/min.)
Max. Operating Pressure 160 psi (1.1 MPa, 11 bar)
Max.Temperature150°F(65°C)
DRYAIRE DESICCANT SYSTEM
6
Desiccant Housing (Part No. 22603)
InstallationAlways place a moisture filter upstream to remove bulk fluids. Always place a coalescing filter upstream to remove oil. Desiccant coated with oil will not absorb moisture.
MaintenanceA supply of low flow/low humidity air will provide longer desiccant life; whereas, high flow/high humidity air will require more frequent desiccant changes.
Installed in an application with intermittent flow, Sharpe’s desiccant dryer will typically dry air for weeks before silica gel desiccant requires replacement or regeneration.
Desiccant ChangeoutReplace or regenerate the desiccant when the desic-cant beads change to a pink color (the blue gel gradu-ally turns pink indicating it has absorbed moisture to the saturation point). Can be regenerated by heating for 4 hours at 275°F (135°C). To reorder, order desiccant replacement (part no. 6765-1).
Parts
Part No. Description6765-1 5 lb Desiccant22661 Flow Tube Assy22663 O-Ring22664 Gasket22665 O-Ring22667 Filter Element (2)22670 O-Ring22679 Sight Glass
22665
22664
22679
22667
22665
22664
22663
22661
22670Flow Tube Assembly (Includes: flow tube, nut, O-ring, filter elements and retainers)
REPLACEMENT PARTS DRAWINGS INDEX
Model 6760 Dryaire Desiccant System
Desiccant Housing Stage 3 - Part No. 22603
Self-Relieving Air Regulator PartNo.22604
DRYAIRE DESICCANT SYSTEM
7
I
Self-Relieving Air Regulator (Part No. 22604)
MaintenanceIf the air supply is kept clean, this regulator will provide long periods of uninterrupted service. Erratic regulator operation or loss of regulation is most always due to dirt in the diaphragm area and cleaning is in order.
CleaningDepressurize regulator, remove bottom plug, spring valve, and diaphragm. Clean parts with denatured alco-hol, wipe off seat and blow out body with compressed air. Reassemble parts as a unit and screw into regulator before tightening bottom plug Make sure disc is in cen-ter hole in body. Should regulator continue to malfunc-tion, obtain diaphragm/valve repair kit (part no. 22680) and replace parts provided.
22682
2268022685
SpecificationsAir Inlet 3/8 in. F.P.T. Air Outlet 1/4 in. F.P.T. (3 EA.)
Air Flow Capacity 100 cfm (2.8 m3/min.)Max. Operating Pressure 160 psi (1.1 MPa, 11 bar)Max. Temperature 150°F (65°C)
Parts
Part No. Description8320 Air Pressure Gauge10028 Plug22680 Diaphragm/Valve Repair Kit22682 T-Handle Adjusting Screw22685 Bottom Spring22687 3/8 in. x 3/8 in. Nipple34700 Outlet Valve
AIR REGULATOR (22604)
AIR PRESSURE GAUGE (8230)
NIPPLE (22687)
PLUG(10028)
OUTLET VALVE (34700)
45
REFERENCE
www.sharpe1.com • 1-800-742-7731
REPLACEMENT PARTS DRAWINGS INDEX
Air Control Units
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.com
310601D, 4/2006
THE SPRAY GUN PEOPLE
Model 606APart No. U06720
22037
Model 606BPart No. 6730
22013
32135
32134
10028
1630see other side
34700
33145
U06710see other side
U06710see other side
U34606
8240
22014
22037
32135
32134
1630see other side
34700
33145
Model 606CPart No. 6740
U06710see other side
82408230
8230
10028
1630see other side
32134
34700 34606
22014
32134
1630see other side
34700
10028
10028
AIR CONTROL UNITSMaximum Working Pressure: 160 psi (1.1 MPa, 11 bar)
46
REFERENCE
www.sharpe1.com • 1-800-742-7731
Part No. Description 10022 Adjusting Screw
10023 Screw
10003 Bonnet
10018 Washer Spring
10016 Pressure Spring
10019 Vibration Dampener
10015 Diaphragm
10008 Valve Body
10005 Valve Seat
10010 Valve
10006 Valve Spring
10002 Body
10013 Brass Screen
2 310601D
Model 606 AIR FILTERPart No. 6710
22026
22013
22037
22019
19920
19929
19930
22033
22032
22035
34449
22012
THE SPRAY GUN PEOPLE
Model 606 Air FilterMaximum Working Pressure:160 psi (1.1 MPa, 11 bar)
PART NO. DESCRIPTION
22026 Screw
22013 Bottle Lid
22037 Plug
22019 Gasket
19920 Washer
19929 Shield
19930 Filter Element
22033 Rod Assembly
22032 Retainer
22035 Nut
22012 Mach Filter Bottle
34449 Air Cock Regulator Valve
310601D 3
Air RegulatorMaximum Working Pressure:160 psi (1.1 MPa, 11 bar)
PART NO. DESCRIPTION
10022 Adjusting Screw
10023 Screw
10003 Bonnet
10018 Washer Spring
10016 Pressure Spring
10019 Vibration Dampener
10015 Diaphragm
10008 Valve Body
10005 Valve Seat
10010 Valve
10006 Valve Spring
10002 Body
10013 Brass Screen
THE SPRAY GUN PEOPLE
10022
10023
10003
10018
10016
10019
10015
U10008
U10005
10010
U10006
U10002
10013
AIR REGULATORPart No. 1630
REPLACEMENT PARTS DRAWINGS INDEX
Model 606 Air Filter Part No. UO6710
18C-3R Air Regulator Part No. 1630
Part No. Description 22026 Screw
22013 Bottle Lid
22037 Plug
22019 Gasket
19920 Washer
19929 Shield
19930 Filter Element
22033 Rod Assembly
22032 Retainer
22035 Nut
22012 Mach Filter Bottle
34449 Air Cock Regulator Valve
Maximum Working Pressure:160psi (1.1 MPa, 11 bar)
Maximum Working Pressure:160psi (1.1 MPa, 11 bar)
47
REFERENCE
www.sharpe1.com • 1-800-742-7731
Part No. Description 10028 Plug
22026 Cap Screw
22033 Assembly Rod
22035 Nut
U32701 Filter Bottle
U32702 Filter Top
U32708 Gasket
32709 Filter Washer
U32718 Shield
U32719 Filter Element
32721 Retainer
34449 Drain Cock
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.com
310603C, 4/2006
THE SPRAY GUN PEOPLE
F88 AIR FILTERPART NO. 8130
Maximum Working Pressure: 160 psi (1.1 MPa, 11.0 bar)
PART NO. DESCRIPTION
10028 Plug
22026 Cap Screw
22033 Assembly Rod
22035 Nut
U32701 Filter Bottle
U32702 FIlter Top
U32708 Gasket
32709 Filter Washer
U32718 Shield
U32719 Filter Element
32721 Retainer
34449 Drain Cock
22026
U32702
10028
U32708
32709
32701
34449
U32718
32719
22033
32721
22035
F88 Air FilterPart No. 8130
REPLACEMENT PARTS DRAWINGS INDEX
Maximum Working Pressure:160psi (1.1 MPa, 11 bar)U
48
REFERENCE
www.sharpe1.com • 1-800-742-7731
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.com
310605C, 4/2006
THE SPRAY GUN PEOPLE
10022
10023
10003
10018
10016
10019
10015
U10008
U10005
10010
U10006
U10002
10013
10022
10023
10003
10018
10016
10019
10015
U10008
U10005
10010
U10006
10001
10013
Air RegulatorPart No. 1630
3 regulated outlets
Air RegulatorPart No. 1610
2 regulated outlets1 main line outlet (bypass)
REPLACEMENT PARTS DRAWINGS INDEX
Air Regulator Part No. 1610
2 Regulated Outlets 1 Main Line Outlet (bypass)
310603C
THE SPRAY GUN PEOPLE
880A AIR CONTROL UNITPART NO. 6950
Maximum Working Pressure: 160 psi (1.1 MPa, 11.0 bar)
32135
32134
10028
1630
33145
34700
F888130
PART NO. DESCRIPTION
1630 Air Regulator
8130 Air Filter
10028 Plug
32134 Nipple
32135 Elbow
33145 Gauge
34700 Air Cock
18C-3R AIR REGULATORPART NO. 1630
10022
10023
10003
10018
10016
10019
10015
10008
10005
10010
10006
10002
10013
PART NO. DESCRIPTION
10022 Adjusting Screw
10023 Screw
10003 Bonnet
10018 Washer Spring
10016 Pressure Spring
10019 Vibration Dampener
10015 Diaphragm
10008 Valve Body
10005 Valve Seat
10010 Valve
10006 Valve Spring
10002 Body
10013 Brass Screen
880A Air Control Unit Part No. 6950
Part No. Description 1630 Air Regulator
8130 Air Filter
1002 8 Plug
32134 Nipple
32135 Elbow
33145 Gauge
34700 Air Cock
Maximum Working Pressure:160psi (1.1 MPa, 11 bar)
49
REFERENCE
www.sharpe1.com • 1-800-742-7731
REPLACEMENT PARTS DRAWINGS INDEX
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.com
310611C, 6/2007
THE SPRAY GUN PEOPLE
FOR PRODUCT INFORMATION CALL:
1-800-742-7731
MODEL 705FC 1/2 in. IN-LINE FILTER AND COALESCER WITH OVERNIGHT DRAINS
Air Filter with Overnight Drain(Part No. 22601)
MaintenanceTo maintain maximum filtering efficiency and to avoid excessive pressure drop, the filter must be kept clean. Bowl drainage is automatic with the overnight drain, however manual draining can also be done by remov-ing the bowl. A visible coating of dirt on the filter ele-ment surface or an excessive pressure drop is an indication that cleaning is necessary.
CleaningTo clean, it is not necessary to remove the complete fil-ter from the line. Disassembly is simple and does not require tools. Before disassembly, shut off the air sup-ply and depressurize filter. Clean all parts with cleaning solvent and blow out filter body before reassembly. Wash filter element in cleaning solvent and blow out from the inside.
Overnight DrainThe overnight drain is equipped with a float actuated device which automatically ejects liquid contaminates. When the pressure is off, the unit will drain.
SpecificationsAir Inlet 1/2 in. F.P.T.Air Outlet 1/2 in. F.P.T.Air Flow Capacity 115 cfm (3.2 m3/min.)Max. Operating Pressure 175 psi (1.2 MPa, 12 bar)Max. Temperature 150°F (65°C)
Parts
Part No. Description22631 Overnight Drain22638 O-Ring22640 Baffle Kit22645 Filter Element
O-Ring
Filter Element
OvernightDrain
(22638)
(22645)
(22631)
Baffle Kit(22640)
IN-LINE FILTERS AND COALESCERS
2
Coalescer withOvernight Drain(Part No. 22605)
InstallationIt is always recommended that a Sharpe air filter be installed upstream of the coalescing filter to remove 5 micron and larger size particles and separate large droplets of moisture from the air line.
MaintenanceNever let the liquid in the bowl reach the base of the coalescing element.
CleaningTo clean, it is not necessary to remove the complete filter from the line. Disassembly is simple and does not require tools. Before disassembly, shut off the air supply and depressurize coalescer. Clean all parts with cleaning solvent and blow out body before reas-sembly. Replace coalescing element (part no. 22655).
Pressure Drop IndicatorThe differential pressure drop indicator on this unit is designed to provide early detection of a clogged coa-lescing filter element. As the filter element becomes clogged the red indicator will start to rise while air is flowing through the unit. When the pressure drop across the element reaches 10-12 psi (.07-.08 MPa, 0.7-0.8 bar) the red indicator will be in full view and the element should be replaced. Failure to replace the element when the pressure drop exceeds 10 psi (.07 MPa, 0.7 bar) will affect your air quality and tool effi-ciency.
SpecificationsAir Inlet 1/2 in. F.P.T.Air Outlet 1/2 in. F.P.T.Air Flow Capacity 70 cfm (2 m3/min.)Max. Operating Pressure 175 psi (1.2 MPa, 12 bar)Max. Temperature 150°F (65°C)
Parts
Part No. Description22631 Overnight Drain22632 Mounting Bracket22647 O-Ring22650 Pop-up Indicator Repair Kit22655 Coalescer Element
O-Ring
Coalescer
OvernightDrain
(22647)
(22631)
Element(U23075)
Pop-upIndicator(22650)
Model 705FC Air Filter with Overnight Drain Stage 1 - Part No. 22601
Coalescer with Overnight Drain Stage 2 - Part No. 22605
Part No. Description 22631 Overnight Drain
22638 O-Ring
22640 Baffle Kit
22645 Filter Element
Part No. Description 22631 Overnight Drain
22632 Mounting Bracket
22647 O-Ring
22650 Pop-up Indicator Repair Kit
22655 Coalescer Element
50
REFERENCE
www.sharpe1.com • 1-800-742-7731
Return Unused Inventory to Sharpe
Sharpe Inventory Adjustment Return PolicySharpe will accept returns of product purchased from Sharpe and issue credit at invoiced or lowest price paid by the distributor over the past 2 years. Returns will be accepted up to atotalof:
• 4%ofcustomer’stotalnetpurchasesoftheprecedingyear
OR
• $50,000-whicheverisless(The$50,000limitappliestoeach company, not each branch location.)
A25%restockingchargewillbedeductedifthe4%or$50,000yearly limit is exceeded.
TheReturnPolicyisconditionedupon:
• Pre-returnauthorizationfromSharpeCustomerService.Ifapproved, you will receive a Returned Goods Authorization (RGA Form) to file your claim
• Prepaymentoffreightbythecustomer
• Toinsurecreditbyyearend,productmustbereceivedinSioux Falls, SD between January 1 and October 31
• Returnedproductmustbeofcurrentseries,unused,undamaged, and in saleable condition
• Ifproductrequiresrepackaging,achargeof10%ofeachitem’snetvalueoramaximumof$100foreachrepackaged item, whichever is less, will be deducted from the credit value
• Opened,shelfwornorvendormarked(pricetagsorotherexternal markings) will be charged repackaging fees
Credit will be posted on the second statement following the return shipment.
Products Not Eligible To Be Returned• Productthatisnotofcurrentseries
• Discontinuedproducts
• Dirty,corroded,rusty,scratched,usedordefaced(packaging or product) or otherwise not resalable items
• Defacedproduct
• Componentsorequipmentthathasbeenremovedordisassembled from a Sharpe assembled unit
What unused inventory items are eligible for return?• Allundamaged,unusedandofcurrentseriesanddesign
that was purchased from Sharpe.
• Allcurrentservicepartsthathavenotbeendefacedandarein resalable condition.
• Boxedorcartongoodsthathavebeenopenedcanbereturned, however, a repackaging fee may be charged.
RepackagingPolicy: If a product requires repackaging because the packaging is defaced, marked or worn, a charge of 10%ofeachitem’snetvalueoramaximumof$100foreachrepackaging item, whichever is less, will be deducted from the credit value.
What unused inventory items are NOT eligible for return?• Productthatisnotofcurrentseries.
• Discontinuedproducts.ItemswillbereturnedatChannelMembers’ expense.
• Dirty,corroded,rusty,scratched,usedordefaced(packaging or product) or otherwise not saleable items.
• Componentsorequipmentthathasbeenremovedordisassembled from a Sharpe assembled unit.
Returns associated with warranty claims and Sharpe order processing errors will not be included in your 4%or$50,000limit.
What amount will be credited for the return?• Creditwillbebasedoninvoiceprice(ifcopyofinvoiceis
supplied with return) or lowest price paid by the Channel Member over the past two years.
• TheRGAformwillincludethetotalreturncreditamount(notincluding repackaging, restocking charges, unacceptable items, which may be applicable).
• Creditwillbepostedonyoursecondstatementfollowingthe shipment of the return.
51
REFERENCE
www.sharpe1.com • 1-800-742-7731
Sharpe Return Shipping Procedures
Please verify that the information provided to Sharpe on the Returned Goods Authorization form (RGA Form) is correct.
• Ifyouwishtoaddanyproductorchangeanyinformation,please obtain pre-authorization by calling Customer Service at 1-800-742-7731.
• Pleasecompletetheshippinginformationboxonthefirstpageofthis document and provide all information concerning the return.
• Makeacopyofthisformforyourrecordsandreturnonecopyas a packing slip.
• Pleaseensurethatallproductsareidentifiedwithpartnumbers.
• Pleaseboxallitemsandpackagesecurelyforshipping.
• Pleaseprepaythefreight.Collectshipmentswillnotbeaccepted.
• Approvedreturnsmustbereceivedwithin45daysfromapproved RGA date.
If you need to follow-up or have any questions regarding these procedures, please direct them to Sharpe Customer Service Department at 1-800-742-7731.
PleaseNote:IfyourbusinessrelationshipwithSharpeendsforany reason, you have a maximum of 90 days from the date of deactivation of your account number (account termination date) to make a final inventory return. We can not accept final returns after 90 days.
Customer Service
InquiriesorOrdersEither can be accomplished by phone or fax
Phone:1-800-742-7731
A Sharpe Representative can assist you with the following:
• OrderEntry
• Productapplicationassistance
• Troubleshooting
• Repairadvice
• Partnumbers
• Availabilityofproduct–stockstatus –pricinginquiries
• Recommendationsforsubstituteproductwhen ordered product is not in stock
• Productinformation
• Deliverydatesand/ordeliverydatechanges
• Productreturnauthorizations
• Creditmemoquestions
• Shippingandtrafficquestions
Note:PleaseprovideyourSharpeaccountnumberwhen requested. Customer service representatives areavailablefrom8:00a.m.to5:30p.m.CST
Fax: 1-800-831-1919
Note:OrderscanbeplacedbyfaxingyourPurchaseOrder to the above fax number. Please include your Sharpe Account Number on all orders.
52
REFERENCE
www.sharpe1.com • 1-800-742-7731
Additional Terms and Conditions of Sale
1. Entire Agreement
Except as set forth below, the sale of products in this shipment shall be governed solely and exclusively by the terms and conditions set forth or referenced on this page. Any objection to these terms and conditions must be communicated by sending a letter or other specific written communication to the attention of Sharpe’s Contract Administrator at the address set forth on this page. Accepting or paying for any part of this shipment, or failing to object within 10 days of receipt of any part of this shipment shall constitute conclusive evidence of acceptance.
Except as set forth below, the terms set forth on this page hereby cancel and supersede any prior or contemporaneous negotiation or agreements, and any additional or different terms set forth on any purchase order, acknowledgment form, or other written or oral communication conveyed to Sharpe by Buyer are hereby expressly rejected.
Notwithstanding the above, in the event that Buyer is operating under a formal Sharpe Distributor, EDI, or systems agreement, Sharpe quotation or Sharpe Policy, any conflicting or supplemental terms and conditions set forth in such formal agreement, quotation or policy shall prevail.
2. Objection to Purchasers Terms
Any term or condition of purchaser’s order or other document which is different from, in addition to, or inconsistent with any term or condition of this document is hereby objected to by Sharpe and cannot be binding or effective against Sharpe unless accepted in writing by an officer thereof.
3. Warranty and Disclaimer
Sharpe warrants all equipment manufactured by Sharpe and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Sharpe Channel Member to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Sharpe, Sharpe will, for a period represented in the Product Warranty Matrix on the inside back cover, issue credit, repair or replace any part of the equipment determined by Sharpe to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Sharpe’s written recommendations.
This warranty does not cover, and Sharpe shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Sharpe component parts. Nor shall Sharpe be liable for malfunction, damage or wear caused by the incompatibility of Sharpe equipment with structures, accessories, equipment or materials not supplied by Sharpe, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Sharpe.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Sharpe Channel Member for verification of the claimed defect. If the claimed defect is verified, Sharpe will issue credit, repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Sharpe’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within one year beyond the warranty expiration of the particular product.
Except as expressly set out in this warranty, Sharpe makes no representations, warranties or conditions, express or implied or collateral, concerning any goods or services and SHARPE SHALL NOT BE LIABLE IN ANY MANNER FOR any other representation or warranty or condition of any kind, whether express or implied or collateral, or whether arising by operation of law or otherwise, including, but not limited to, WARRANTIESOFMERCHANTABLEQUALITYORFITNESS FOR A PARTICULAR PURPOSE.
In no event will Sharpe be liable for indirect, incidental, special or consequential damages resulting from Sharpe supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Sharpe, or otherwise.
4.Delivery
Sharpe shall not be liable for any delay in the production or delivery of any of the products referred to herein if such delay is due to fire, flood, accident, delay in transportation, inability to obtain material, war, embargo, demand or requirement of the Government, labor dispute, and/oranyothercausewhatsoeverbeyondthereasonable control of Sharpe.
5. Terms of Payment and Prices
Subject to approval and continuation of approval of credit by Sharpe, the terms of payment are 30 days net from date of invoice. In the event Sharpe does not approve credit to the purchaser, or if at any time after approval of credit and before delivery, Sharpe in its sole judgment, decides that the extension of further credit is unjustified, terms of payment shall be those specified by Sharpe, including but not limited to C.O.D. or cash in advance. All payments shall be in the legal currency as stated on the invoice.
All prices are subject to exception or change without notice. Pricing errors may be corrected at any time.
Sharpe reserves the right to select those qualified distributors to whom it will sell its products for resale. Channel Member minimum billing is set forth in Sharpe price list, exclusive of all non-product charges.
6. Patent Infringement
Sharpe agrees to defend purchaser or its customers in any suit brought against them so far as it is based on a claim that any product or part thereof sold by Sharpe under this document infringes a United States patent, but only on the condition that Sharpe is notified promptly in writing of such claim, is given full authority to conduct such defense including the compromise or settlement of any claim, and provided further that purchaser has not prejudiced such defense by any admissions, statements or conduct. Purchaser further agrees to give Sharpe at Sharpe’s expense whatever information, cooperation, assistance and authority Sharpe may reasonably require for such defense. Sharpe will not assume the defense of purchaser or its customers if the infringement is alleged to consist either of the use of the product or part incombinationwithotherdevices,and/orofthe modification or alteration of the product or part, unless Sharpe shall have specifically recommended such use or modification in its instruction manuals. Purchaser agrees to hold Sharpe harmless against any claim which arises out of Sharpe’s compliance with purchaser’s specifications. In no event will Sharpe be liable for any special, incidental or consequential damages, loss of profits, or loss of revenue resulting from any infringement or alleged infringement. The foregoing states the entire liability of Sharpe for patent infringement.
For Sharpe Canadian and Hispanic Customers
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir
convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donné intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
Los participantes confirman que han solicitado que el presente documento, así como todos los documentos, avisos y procesos legales solicitados en, concedidos o instituidos conforme a esto, o relacionados directa o indirectamente a esto, sean redactados en Inglés.
53
INDEX
www.sharpe1.com • 1-800-742-7731
1-6770-3 ............................1415E422...............................2115E449...............................2115F402 ...............................2115F403 ...............................211010...................................231410...................................191610.............................19, 481620...................................191630.......................19, 46, 481640...................................192210.......................3, 5, 7, 233310...................................234012...................................294013...................................294014...................................294015...................................294016...................................294017...................................294212...................................294213...................................294214...................................294215...................................294216...................................294217...................................295222...................................295224...................................295235...................................295250...................................295485...................................295712...................................295714...................................295716...................................295812...................................295814...................................295815...................................295816...................................295818...................................295823...................................295866...................................296610.................12, 21, 24, 356680...................................246685.............................20, 336690...................................206730...................................186740...................................18
6760.......................2, 4, 6, 156765-1 .........................15, 446770.......................3, 5, 7, 146835...................................126880...................................136885...................................136890...................................136895...................................136910...................................176920...................................176930...................................176950.............................18, 487004...................................247030.............................11, 407040.............................11, 207045...................................117110.......................3, 5, 7, 247120...................................247130...................................247210...................................247220...................................247230...................................247506...................................207530...................................118100...................................258125...................................258130.......................16, 47, 488135...................................168255...................................258260...............3, 4, 5, 6, 7, 258310...................................248320.............................24, 448330...................................248340...................................249500...................................129893...................................259894...................................2516111.................................1219930.....................16, 18, 4620994.................................2422104.................................2022645...14, 15, 17, 42, 43, 4922655...............15, 17, 43, 4927404.................................2029006...........................11, 4029086...........................11, 40
34800...........................20, 3834806...........................11, 3834808...........................11, 3934835.....................11, 38, 3937065.................................2039995.................................1339996.................................1339997.................................13234791.................................7249994.................................4253417...............................21253418...............................21253427.................................4253428.................................4253429.................................4253430.................................4253431.................................2253432...........................2, 29253433...........................2, 29253434.....................2, 14, 29253435...........................2, 29253436...........................2, 29253437...............7, 20, 29, 33253438...........2, 7, 14, 20, 29253439.....................7, 20, 29253440.................................5253441...........................5, 29253442...........................5, 29253443...........................5, 29253444...........................5, 29253445.................................5253446.................................5253769.........................2, 4, 5253771.................2, 3, 4, 5, 6253772.............2, 3, 4, 5, 6, 7253773.................................4253774.............................5, 7253775.............................5, 6253777.................................8253778.................................8253789.................................7253790.................................7253792.................................2253793.................................2253794.............................2, 3253795.............................2, 3
PART NO. PAGE(S) PART NO. PAGE(S) PART NO. PAGE(S)
54
INDEX
www.sharpe1.com • 1-800-742-7731
253796.............................2, 3253797.................................2253802.................................4253803.................................4253804.................................4253805.................................4253806.................................4253816.................................5253817.................................5253818.................................5253819.................................5253820.................................5253821.................................5253822.................................5253823.................................4253824.................................2253825.................................5253826.................................5253827.................................8253828.................................7253969...............................22253975...............................22253978...................2, 4, 6, 20287961...........................8, 29288279.................................6288280.................................6288281.................................6288282.................................6288283.................................6288284.................................6288285.................................8288286.................................8288287.................................8288288.................................8288289.................................8288290.................................8288291...........................8, 29288292...........................8, 29288293.................................8288294...........................8, 29288295.................................6288296.................................6288297.................................6288298.................................6288299.................................6
288300.................................6288301.................................8288302.................................8288303.................................8288304.................................8288305.................................8288306.................................8288307.................................8288308.................................8288309.................................8288310.................................8288451.................................6288452.................................6288453.................................6288454.................................8288455.................................8288456.................................8288457.................................8288640.................................8288641.................................8288642.................................8288643.................................8288654...........................5, 29288878.................................9288879.................................9288880.................................9288881.................................9288882.................................9288883...............................10288884...............................10288885...............................10288886...............................10288887...............................10289198.................................9289199.................................9289200...........................9, 14289212.................................3289214.................................3289215...........................3, 14289216.................................3289221.................................9289222.................................9289286...........................9, 36289287...........................9, 36289288...........................9, 36
289289...........................9, 36289290...........................9, 36289291.........................10, 36289292.........................10, 36289293.........................10, 36289294.........................10, 36289295.........................10, 36289296...........................9, 36289297...........................9, 36289298...........................9, 36289299...........................9, 36289300...........................9, 36289320.........................21, 36289321...............9, 10, 21, 36289517...............9, 10, 21, 36289520...............9, 10, 22, 36289534...............................15309989...............................11309990...............................11309991...............................11310587...............................12310588...............................20310595...............................15310596...............................14310601.........................16, 18310603.........................16, 18310605...............................19310609...............................17310611...............................17310884...............................13311684.............2, 3, 4, 5, 6, 7311685.................................8312372...........................9, 10U23075 ........................14, 42U23080 ..............................17U23085 ..............................17U32719 ..................16, 18, 47U42002 ..............................24UO4410 ..............................23UO5510 ..................2, 4, 6, 23UO6710 ..............................16UO6720 ..............................18UO7505 ........................11, 20UO7510 ........................11, 22UO7530 ..............................22
PART NO. PAGE(S) PART NO. PAGE(S) PART NO. PAGE(S)
Standard Sharpe WarrantySharpe warrants all equipment manufactured by Sharpe and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Sharpe Channel Member to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Sharpe, Sharpe will, for a period of time specified in the following Product Warranty Matrix, issue credit, repair or replace any part of the equipment determined by Sharpe to be defective.
This warranty applies only when the equipment is operated and/orinstalledandmaintainedinaccordancewithSharpe’swritten recommendations. This warranty does not cover, and Sharpe shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering or substitution of non-Sharpe component parts. Nor shall Sharpe be liable for malfunction, damage or wear caused by the incompatibility of Sharpe equipment with structures, accessories, equipment or materials not supplied by Sharpe, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Sharpe.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to Sharpe for verification of the claimed defect. If the claimed defect is verified, Sharpe will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Sharpe’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within one year beyond warranty expiration.
Sharpe makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Sharpe. These items sold, but not manufactured by Sharpe (such as heat lamps, refrigerated dryers, hoses, etc.), are subject to the warranty, if any, of their manufacturer. Sharpe will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Sharpe be liable for indirect, incidental, special or consequential damages resulting from Sharpe supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Sharpe, or otherwise.
For Sharpe Canadian Customers
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
PRODUCT WARRANTY MATRIX
PRODUCTWARRANTy PERIOD
(from date of sale from Sharpe Channel Member to original purchaser
RAZOR® 3 years
Cobalt 2 years
Finex™ by Sharpe 1 year
General Sharpe Product (guns,pots,cups,filters)
2 years
Dryaire Membrane and Desiccant Systems
1 year
Dryaire Refrigerated Air Dryers varies by component