2008 lite kit and louver catalogfo.b5z.net/i/u/10024946/f/2008_full_lite_catalog_08.pdf · national...
TRANSCRIPT
Lite Kits & Lite Kits & Louvers
Lite Kit Products
•LowProfile
•SelfAttaching
•FalseMullion
•ThruBolt
•Round
•StainlessSteel
•Security
Louver Products
•Steel
•NoVision
•Aluminum
•DarkRoom
GLASS
•FireRated
•ImpactSafety Rated Lite Kits & Louvers
Phone:800-647-7874Fax:800-255-7874
www.ngp.com National Guard Products, Inc.The products you count on. The people you trust.
P R o D u c T c A T A L o G
L 2
How to Order :Quantity Model # Finish Cutout size Options
(width x height)example: 10 L-GLF100-SP DKB 24”x 30” G9 for 1/2” thick glass
48 HOUR QUICK SHIP:Our most popular lite kits and louvers in our most popular finishes are available for quick shipment. See the 48hour quick ship section of our price list for models, sizes and finishes available.
Powder Coat Finishes:The standard finish for each product is indicated on the catalog page and in the price list and will be providedunless an optional finish is indicated. The following list of powder coat finishes can be provided on any Lite Kit,Louver, Metal Edge & Astragal Set,Threshold or Gasketing with metal retainer:
Colors Available:(GPZ) Gray Primer (BPR) Beige Primer (matches Steelcraft)(DKB) Dark Bronze (PTY) Putty (matches Anemostat Beige)(T) Tan (CAB) California Bronze (matches Anemostat)(GBL) Gloss Black (W) White(MBL) Matte Black (B) Brass (Gold)(TBL) Textured Black (ASL) Aluminum Silver(SPB) Speckle Belly(WB) Walnut Brown (matches Timely Browntone)(MW) Magnolia White (matches Timely Western White) Custom colors are available - Consult factory for details
Corrosion Resistant Sealer: A polymeric green seal (non-chrome) corrosion resistance extender is appliedunder all NGP powder coat finishes. Laboratory salt spray tests prove a dramatic increase in corrosion resist-ance on steel products with this sealer applied to the metal prior to the powder coat finish.
Salt Spray Test Results: Steel lite kits with NGP’s corrosion resistant sealer and powder coat finish with-stood 1,248 hours without failing. This is 2 1/2 times longer than the protection provided by powder coatingonly.
Zinc Electro-Plating: Available on steel lite kits and louvers for exterior, wet areas, and coastal saltair locations. Zinc electro-plating will be applied prior to the powder coat finish. Specify on order “Zinc EL-Plate”, and powder coat color desired.
The LEED (Leadership in Energy and Environmental Design) Green Building Rating System® is a national stan-dard for developing high-performance, sustainable buildings developed by the U.S. Green Building Council. NGPlite kits and louvers are factory finished using powder coating technology which does not produce volatileorganic compounds (VOCs) in the application process, and does not give off VOCs in use on the job or whenrecycled. If the building where the products are installed is within 500 miles of our manufacturing facility inMemphis TN then NGP materials contribute toward Materials and Resources credits 5.1 and 5.2, Local/RegionalMaterials, in LEED new Construction versions 2.0 and 2.1.
LEED® Green Building Rating System:
MADE IN USA All manufactured products in this catalog are produced in the United States, and comply withthe Buy American Act.
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
EE
D
Gen
eral
In
form
atio
n
L 3
Lite Kit and Louver Index:Model Lite Kit Type Page
L-CVFM-SS Stainless Steel L14L-FRA100 Low Profile L4L-FRA100-RD Round Low Profile L17L-FRA100-SP Low Profile Special Glass or Door Thickness L5L-GLF100 Self-Attaching L6L-GLF100-SP Self-Attaching Special Glass or Door Thickness L8-L9L-GLF100-SP-TB Thru-Bolted Special Glass or Door Thickness L10L-GLF100-TB Thru-Bolted L10L-SG100 Security Grille L11, L13L-SG100-TB Thru-Bolted Security Grille L12-L13L-VGLF-MD, MDL Security Grille with Privacy Panel L15L-VGLF-OG Security Glass with Privacy Panel L16L-VGLF-PZ Security Glass with Privacy Panel L14L-VGLF-SF Security Grille with Privacy Panel L16L-VGLF-WD Security Glass with Privacy Panel L15Options: G2-G24 False Mullion L7Glass and Glazing Tape All Variations L23-L27
Model Louver Type Page
L-75-A, B, BF Dark Room L22L-A700-A, B, BF, C Aluminum L21L-700-A, B, BF, C Steel - Adjustable 1 3/8” to 2 1/4” doors L19L-700RX Steel Self Attaching L18L-1900 Fusible Link L20L-VRSG-2, L-VRSG-3 Security Grille L22
Lite Kit Technical Information:
Fire-Rated Lite Kits: Lite Kits installed in fire-rated doors require fire-rated glass and glazing tape. Refer topages L23-L27 for available glass types and maximum sizes for fire-rated applications.
Impact Safety Rated: IBC 2006 requires glazing in swinging doors to be impact safety-rated to comply withthe CPSC 16CFR 1201 Category I or II. On Fire-rated doors use SuperLite 1-WTM, FireLite®NT, FireLite® Plus,Fireglass20TM or Pilkington PyrostopTM. On non-fire-rated doors use tempered glass or polycarbonate.
Accessibility Standard Compliance:
ICC/ANSI A117.1-2003 standard for Accessible and Usable Buildings and Facilities, section 404.2.10 requires thatthe bottom of the glass panel in a vision lite is 43” maximum above the floor. An exception is made for vision liteswith the lowest part more than 66” above the floor not required to comply.
Louver Technical Information:
Steel louvers over 46” wide and aluminum louvers over 36” wide must be furnished as two louver cores mounted inone louver frame with a mullion in between.
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comIn
dex - Tech
nical In
fo
L 4
1-1/2"(38.1 mm)
11/16"(17.46mm)
3/32"(2.38 mm)
13/16"(20.64 mm)
3/8"(9.525 mm)
3/16" or 1/4" GLASS
GLAZING EACH SIDE
HOLLOW METAL
OR WOOD DOOR
HOLLOW METAL
OR WOOD DOOR
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
"
EX
PO
SE
D G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 2
"
1 3/4"
L-FRA100Low Profile Self-Attaching Lite Kitfor 1 3/4” Door with 3/16” or 1/4” Glass
STANDARD FEATURES* 20 ga. cold rolled steel* Mitered and welded corners* Welded reinforcing clips at corners* Counter-sunk mounting screw-holes* #8 x 3/4” Phillips head SMS* Available in uneven and fractional sizes* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* See page L2 for optional finishes* Torx Security Screws* Galvanneal - A40 Steel* Zinc electro-plating* Glass & Glazing tape (Pages L23-L27)* Lead lining
UL10C POSITIVE PRESSURE FIRE-RATED* Fire-rated 1/4” wire glass:
20 min. requires closed cell PVC foam glazing tape like NGP GT-116.45, 60, 90 min. requires NGP 9800 or 3M GIS intumescent glazing tape.
* Fire-Lite® NT, or Fireglass 20TM
requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
not to scale
Designed for use on 1 3/4” thick doors manufac-tured within door industry tolerance of +/- 1/16”.
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-FR
A10
0 L
ow P
rofi
le L
ite
Kit
L 5
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
CU
T G
LA
SS =
OR
DER
SIZ
E L
ESS
1"
EX
PO
SED
GLA
SS =
OR
DER
SIZ
E L
ESS
2 "
Hollow Metal or
Wood Door
Hollow Metal or
Wood Door
1"
1/2"
3/32"
L-FRA100-SPLow Profile Self-Attaching Lite Kit forVariable Door and/or Glass Thickness
STANDARD FEATURES* 18 ga. cold rolled steel* Mitered and welded corners* Welded reinforcing clips at corners* Counter-sunk mounting screw-holes* #8 Phillips head SMS* Available in uneven and fractional sizes* Standard finish = (GPZ) Gray Primer
REQUIRED INFORMATION* Specify glass thickness on order.* Specify door thickness on order if other than 1 3/4”
OPTIONAL FEATURES* See page L2 for optional finishes* Torx Security Screws* Galvanneal - A40 Steel* Zinc electro-plating* Glass & Glazing tape (Pages L23-L27)* Lead lining
UL10C POSITIVE PRESSURE FIRE-RATED
* Fire-Lite® Plus or Pilkington PyrostopTM:requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
DOOR GLASS
1 3/4" = 1/2"
*1 3/4" = 3/8"
*1 3/4" = 5/16"
*1 3/4" = 7/16"
2" = 3/4"
2 1/4" = 1"
2 1/2" = 1 1/4"
3/32"
1 3/4"
DOOR GLASS
1 3/4" = 1"
1 3/4" = 7/8"
2" = 1 1/4"
2 1/4" = 1 1/2"
2 1/2" = 1 3/4"
1 3/8" = 5/8"
3/32"
DOOR GLASS
1 3/4" = 3/4"
*1 3/4" = 9/16"
*1 3/4" = 5/8"
2" = 1"
2 1/4" = 1 1/4"
2 1/2" = 1 1/2"
1 3/4" 1 3/4"
3/32" 3/32" 3/32" 3/32"
13/32"
1 1/8"
13/32" 13/32"
7/8"
21/32" 21/32"
5/8"
21/32"
Details shown are for 1 3/4” door thicknessOnly configurations shown are available*indicates that thicker glazing tape is required
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
ow P
rofile L
ite Kit - L
-FR
A100-S
P
not to scale
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
L 6
L-GLF100 Self Attaching Lite Kit for 1 3/4” Door with 3/16”, 1/4”, or 5/16” Glass
STANDARD FEATURES* 18 ga. cold rolled steel* Mitered and welded corners* Welded reinforcing clips at corners* Countersunk mounting screw-holes interior side* #6 x 1-3/4” Phillips Truss Head Screws* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* See page L2 for optional finishes* False mullion bars (page L7)* Torx Security Screws* Zinc electro-plating* Galvanneal - A40 Steel* Glass & Glazing tape (Pages L23-L27)* Lead lining
UL10C POSITIVE PRESSURE FIRE-RATED:* Fire-rated 1/4” wire glass:
20 min. requires closed cell PVC foam glazing tape like NGP GT-116.45, 60 or 90 min. requires NGP 9800 or 3M GISintumescent glazing tape.
* Fire-Lite® NT, Fire-Lite® Plus, or Fireglass 20TM requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
EX
PO
SE
D G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
1/2
"
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
11/4" (31.75 mm)
11/4" (31.75 mm)
3/16", 1/4"
or 5/16" GLASS
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 3
/4"
3/16"(4.76 mm)
13/4" 3/16"(4.76 mm)
HOLLOW
METALDOOR
WOODDOOR
3/8"
7/8"7/8"
Designed for use on 1 3/4” thick doors manufacturedwithin door industry tolerance of +/- 1/16”.
not to scale
L-G
LF
100
S
elf A
ttac
hin
g L
ite
Kit
G21
(8 Bars) G24
(9 Bars)
G18
(7 Bars)
G15
(6 Bars)
G8
(4 Bars) G9
(4 Bars)
G12
(5 Bars) G10
(5 Bars)
G6
(3 Bars)
G4
(2 Bars)
G2
(1 Bars)
G3
(2 Bars)
STANDARD FEATURES* 11 ga. steel channel, 1” wide* Fits L-GLF100, L-GLF100-SP, L-GLF100-TB,
L-GLF100-SP-TB, L-SG100, L-SG100-TB * Mullion bars welded into Frame Kit on both sides* Finished to match lite kit
OPTIONAL FEATURES* Zinc electro-plating
To OrderSpecify Lite Kit x G#(i.e.: G2, G3, G4 etc.)If other than as illustrated, provide detail & suffix G-SP
False Mullion Lite Kits
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
L 7
False M
ullio
n L
ite Kits
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.com
L 8
EX
PO
SE
D G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
1/2
"
11/4" (31.75 mm)
11/4" (31.75 mm)
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 3
/4"
3/16"(4.76 mm)
13/8"- 2 1/2" 3/16"(4.76 mm)
HOLLOW
METALDOOR
WOODDOOR
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
STANDARD FEATURES* 18 ga. cold rolled steel* Mitered and welded corners* Welded reinforcing clips at corners* Countersunk mounting screw-holes interior side* #6 Phillips Truss Head screws* Standard finish = (GPZ) Gray Primer
REQUIRED INFORMATION* Specify glass thickness on order* Specify door thickness on order if other
than 1-3/4”
OPTIONAL FEATURES* See page L2 for optional finishes* False mullion bars (Page L7)* Torx Security Screws* Zinc electro-plating* Galvanneal - A40 Steel* Glass & Glazing tape (Pages L23-L27)* Lead lining
UL10C POSITIVE PRESSURE FIRE-RATED* Fire-rated 1/4” wire glass:
20 min. requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.45, 60, 90 min. requires NGP 9800 or 3M GIS intumescent glazing tape.
* Fire-Lite® NT, Fire-Lite® Plus, Pilkington PyrostopTM or Fireglass 20TM requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
L-GLF100-SPSelf Attaching Lite Kit for Variable Door and/or Glass Thickness
not to scale
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-GL
F10
0-S
P
Sel
f Att
ach
ing
Lit
e K
it
3/16"3/16"
7/8"3/8"7/8"
DOOR GLASS
*2" = 7/16"
2" = 1/2"
2 1/4" = 3/4"
2 1/2" = 1"
3/16"3/16"
1/2"3/4"7/8"
DOOR GLASS
*1 3/4" = 1/2"
*1 3/4" = 9/16"
1 3/4" = 5/8"
1 3/8" = 1/4"
2" = 7/8"
3/16"3/16"
1/2"1 1/8"1/2"
DOOR GLASS
1 3/4" = 1"
*1 3/8" = 1/2"
*1 3/8" = 9/16"
1 3/8" = 5/8"
1" = 1/4"
3/16"3/16"
3/8" 7/8" 7/8"
DOOR GLASS
1 3/4" = 3/4"
1 3/8" = 3/8"
2" = 1"
3/16"3/16"
3/8" 1 1/4" 1/2"
DOOR GLASS
1 3/4" = 1 1/8"
1 3/8" = 3/4"
3/16"3/16"
3/8"1 3/8"3/8"
DOOR GLASS
1 3/4" = 1 1/4"
1 3/8" = 7/8"
1" = 1/2"
1 3/4" 1 3/4"
1 3/4" 1 3/4"
1 3/4"1 3/4"
L-GLF100-SP and L-GLF100-SP-TBGLASS AND DOOR VARIATIONS
L 9
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comS
ize Ch
art L-G
LF
100-SP
LG
LF
100SP
-TB
Details shown are for 1 3/4” door thicknessOnly Configurations shown are available*indicates that thicker glazing tape is required
L 10
WOOD
DOOR
METAL
DOOR
1 1/4"(31.75mm)
1 1/4"31.75mm)
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 5
/16"
EX
PO
SE
D G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
-1/1
6"
1 3/4"
3/16"3/16"
3/8" to 1-1/4" Glass
STANDARD FEATURES* 18 ga. cold rolled steel* Mitered and welded corners* Welded reinforcing clips at corners* Countersunk mounting screw-holes* Thru-bolts for 1-3/4” door* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* See page L2 for optional finishes* False Mullion bars (Page L7)* #8 x 3/4” Phillips head SMS
both sides (specify “pack with screws”)* Torx Security screws both sides* Zinc electro-plating* Galvanneal - A40 Steel* Glass & Glazing tape (Pages L23-L27)* Lead lining
not to scale
L-GLF100-SP-TB Thru-bolted Lite Kit for 1 3/4” doors,with variable glass thickness 1/2” up to1 1/4”
STANDARD FEATURES* 18 ga. cold rolled steel* Mitered and welded corners* Welded reinforcing clips at corners* Countersunk mounting screw-holes* Thru-bolts for 1-3/4” door* Standard finish = (GPZ) Gray Primer
REQUIRED: Specify Glass thickness
OPTIONAL FEATURES* See page L2 for optional finishes* False Mullion bars (Page L7)* Torx Security screws both sides* Zinc electro-plating* Galvanneal - A40 steel* Glass & Glazing tape (Pages L23-L27)* Lead lining
UL10C POSITIVE PRESSURE FIRE-RATED* Fire-rated 1/4” wire glass:
20 min. requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.45, 60, 90 min. requires NGP 9800 or 3M GIS intumescent glazing tape.
* Fire-Lite® NT, Fire-Lite® Plus, Pilkington PyrostopTM or Fireglass 20TM requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
L-GLF100-TBThru-bolted Lite Kit for 1-3/4” Doors with 3/16”, 1/4”, or 5/16” Glass
Designed for 1 3/4” thick Doors manufacturedwithin door industry tolerance of +/- 1/16”
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-GL
F10
0-S
P-T
B
L
-GL
F10
0-T
B
Th
ru-B
olt
ed L
ite
Kit
s
L 11
EX
PO
SE
D G
LAS
S =
OR
DE
R S
IZE
LE
SS
11/
2"
11/4" (31.75 mm)
11/4" (31.75 mm)
CU
T G
LAS
S =
OR
DE
R S
IZE
LE
SS
3/4
"
3/16"(4.76 mm)
13/8"- 2 1/2" 3/16"(4.76 mm)
HOLLOW
METALDOOR
WOODDOOR
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
16 ga. STEEL3/4" X 3/4"SECURITY GRILLE
STANDARD FEATURES* 18 ga. cold rolled steel* 16 ga. steel 3/4” x 3/4” security grille welded in both sides* Mitered and welded corners* Welded reinforcing clips at corners* Countersunk mounting screw-holes interior side* #6 Phillips truss head screws* Standard finish = (GPZ) Gray Primer
REQUIRED INFORMATION* Specify glass thickness on order* Specify door thickness on order if other
than 1-3/4”. (See page L13 for available sizes)
OPTIONAL FEATURES* See page L2 for optional finishes* False mullion bars (Page L7)* Torx security screws* Zinc electro-plating* Galvanneal - A40 Steel* Glass & glazing tape (Pages L23-L27)* Lead lining
UL10C POSITIVE PRESSURE FIRE-RATED* Fire-rated 1/4” thick wire glass:
20 min. requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
45, 60, 90 min. requires NGP 9800 or 3M GIS intumescent glazing tape.
* Fire-Lite® NT, Fire-Lite® Plus, Pilkington PyrostopTM or Fireglass 20TM requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
L-SG100Self Attaching Lite Kit with Security Grillefor Variable Door and/or Glass Thickness
not to scale
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comS
ecurity G
rille Lite K
it L-S
G100
L 12
WOOD
DOOR
HOLLOW
METAL
DOOR
1 1/4"(31.75mm)
1 1/4"31.75mm)
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 5
/16"
EX
PO
SE
D G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
-1/1
6"
1 3/4" "
3/16"3/16"
16 ga. STEEL
3/4" X 3/4"
SECURITY
GRILLE
not to scale
STANDARD FEATURES* 18 ga. cold rolled steel* 16 ga. steel 3/4” x 3/4” security grille welded in both sides* Mitered and welded corners* Welded reinforcing clips at corners* Countersunk mounting screw-holes* Thru-bolts for 1-3/4” door* Standard finish = (GPZ) Gray Primer
REQUIRED INFORMATION:* Specify glass thickness on order
(See page L13 for available sizes)
OPTIONAL FEATURES* See page L2 for optional finishes* False mullion bars (Page L7)* Torx security screws both sides* Zinc electro-plating* Galvanneal - A40 Steel* Glass & Glazing tape (Pages L23-L27)* Lead lining
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
L-SG100-TB Thru-Bolted Lite Kit with Security GrilleFor 1 3/4” Doors with Variable Glass Thickness
UL10C POSITIVE PRESSURE FIRE-RATED* Fire-rated 1/4” thick wire glass:
20 min. requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.45, 60, 90 min. requires NGP 9800 or 3M GIS intumescent glazing tape.
* Fire-Lite® NT, Fire-Lite® Plus, Pilkington PyrostopTM or Fireglass 20TM
requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-SG
100-
TB
Th
ru-B
olt
ed S
ecu
rity
Gri
lle
Lit
e K
It
L 13
1 3/4"
7/8"3/8"7/8"
DOOR GLASS
1 3/4" = 1/8
2" = 3/8"
2 1/4" = 5/8"
2 1/2" = 7/8"
1/2"3/4"7/8"
DOOR GLASS
*1 3/4" = 3/8"
*1 3/4" = 7/16"
1 3/4" = 1/2"
1 3/8" = 1/8"
2" = 3/4"
1/2"1 1/8"1/2"
DOOR GLASS
1 3/4" = 7/8"
*1 3/8" = 3/8"
*1 3/8" = 7/16"
1 3/8" = 1/2"
1" = 1/8"
3/8" 7/8" 7/8"
DOOR GLASS
1 3/4" = 5/8"
1 3/8" = 1/4"
2" = 7/8"
3/8" 1 1/4" 1/2"
DOOR GLASS
1 3/4" = 1 "
1 3/8" = 5/8"
3/8"1 3/8"3/8"
DOOR GLASS
1 3/4" = 1 1/8"
1 3/8" = 3/4"
1" = 3/8"
1 3/4"
11/16"
9/16"7/8"
DOOR GLASS
1 3/4" = 1/4"
1 3/4" = 5/16"
2" = 9/16"
2 1/2" = 1 1/16"
1 3/4"
1 3/4"1 3/4"
1 3/4"1 3/4"
*
3/16" 3/16" 3/16"
3/16" 3/16"
3/16" 3/16"
L-SG100 and L-SG100-TBwith 1/16” Thick Security Grille Variations
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comS
ize Ch
art L-S
G100 L
-SG
100-TB
Details shown are for 1 3/4” door thicknessOnly Configurations shown are available*indicates that thicker glazing tape is required
L 14
L-VG
LF-P
Z
Sec
urity
Lite
Kit
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
"
EX
PO
SE
D G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 2
"
Hollow Metal or
Wood Door
Hollow Metal or
Wood Door
1"
1/2"
5/64"
1 3/4"
3/8"(9.525 mm)
3/16", 1/4" or 5/16" GLASS
L-CVFM-SSStainless Steel Lite Kit
STANDARD FEATURES* 20 ga.Type 304 stainless steel* Mitered and welded corners* For 1-3/4” door; accepts 3/16”, 1/4” or 5/16” glass* Countersunk mounting screw-holes* #8 x 1 3/4” Phillips head SMS* Standard finish - #4 satin
FACTORY OPTIONS* Torx Security Screws* See Page L2 for optional finishes* Glass & Glazing tape (Pages L23-L27)
115/16" (49.21 mm)
1/2" (12.7 mm)
11/16" (17.46 mm)
3/4" (19.05 mm)
EX
PO
SE
D G
LA
SS
=6"
x 6
"
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E =
9"
X 9
"
CU
T G
LA
SS
= 7
1/4
" x 7
1/4
"
13/4" (44.45mm)
METAL/WOODDOOR
13/4" (44.45mm)
METAL/WOODDOOR
1/2" (12.7 mm)Polycarbonate Plastic
L-VGLF-PZ (9” X 9”)Security Lite Kit
STANDARD FEATURES* 18 ga. cold rolled steel* Mitered and welded corners* For 1-3/4” hollow metal/wood doors* 1/2” thick high impact polycarbonate plastic* No exposed fasteners on outside of door* Low-profile frame* 6”x 6” exposed glass size* 2.8 oz. Silicone sealant included* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* Torx security screws* See page L2 for
optional finishes* Zinc electro-plating
not to scale
not to scale
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-CV
FM
-SS
Sta
inle
ss S
teel
Lit
e K
it
13/4" (44.45mm)
METAL/WOOD
DOOR
13/4" (44.45mm)
METAL/WOOD
DOOR
1/2"
(12.7mm)
11/16"
(17.46 mm)
3/4"
(19.05 mm)
18 GA. STEEL PANEL
16 Ga. STEEL
3/4" X 3/4"
SECURITY GRILLE
1/2" (12.7mm)
POLYCARBONATE
PLASTIC
1 15/16"
(49.21 mm) D
OO
R C
UT
OU
T &
OR
DE
R S
IZE
E
XP
OS
ED
GLA
SS
=
OR
DE
R S
IZE
LE
SS
3"
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
3/4
"
L-VGLF-MD (9” X 9”),L-VGLF-MDL (12” X 12”)Security Lite Kits
STANDARD FEATURES* 18 ga. cold rolled steel * Mitered and welded corners* For 1 3/4” hollow metal/wood doors* 1/2”thick high impact polycarbonate plastic* 16 ga. steel 3/4” x 3/4” security grille* 18 ga. steel hinged panel* No exposed fasteners on outside of door* Low-profile frame* 6”x 6” exposed glass size on L-VGLF-MD* 9”x 9” exposed glass size on L-VGLF-MDL* 2.8 oz. Silicone sealant included* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* Torx security screws* See page L2 for optional finishes* Zinc electro-plating
L-VGLF-WD (9” X 5”)Security Lite Kit
13/4" (44.45mm)
METAL/WOOD
DOOR
13/4" (44.45mm)
METAL/WOOD
DOOR
1/2"
(12.7 mm)
11/16"
(17.46 mm)
3/4"
(19.05 mm)
18 GA. HINGED
STEEL PANEL
1/2" (12.7 mm)
POLYCARBONATE
PLASTIC
15/16"
(49.21 mm)
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E =
9"
X 5
"
CU
T G
LA
SS
= 7
1/3
" X
3 1
/4"
EX
PO
SE
D G
LA
SS
= 6
" X
2"
STANDARD FEATURES* 18 ga. cold rolled steel * Mitered and welded corners* 1 3/4” hollow metal/wood doors* 1/2” thick high impact polycarbonate plastic* 18 ga. steel hinged panel* No exposed fasteners on outside of door* Low-profile frame* 6”x 2” exposed glass size* 2.8 oz. Silicone sealant included* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* Torx security screws* See page L2 for optional
finishes* Zinc electro-plating
not to scale
L 15
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comS
ecurity L
ite Kits L
-VG
LF
-MD
L-V
GL
F-M
DL
L-V
GL
F-W
D
L 16
115/16" (49.21 mm)
1/2" (12.7 mm)POLYCARBONATE
PLASTIC
18 GA. HINGEDSTEEL PANEL
1/2" (12.7 mm)
11/16" (17.46 mm)
3/4" (19.05 mm)
EX
PO
SED
GLA
SS =
6"
x 6
"
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E =
9"
x 9
"
CU
T G
LA
SS =
7 1
/4"
x 7
1/4
"
13/4" (44.45mm)
METAL/WOODDOOR
13/4" (44.45mm)
METAL/WOODDOOR
L-VGLF-OG (9” X 9”)Security Lite Kits
STANDARD FEATURES* 18 ga. cold rolled steel * Mitered and welded corners* For 1 3/4” hollow metal/wood doors* 1/2” thick high impact polycarbonate plastic* 18 ga. steel hinged panel* No exposed fasteners on outside of door* Low-profile frame* 6”x 6” exposed glass size * 2.8 oz. Silicone sealant included* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* Torx security screws* See page L2 for optional finishes* Zinc electro-plating
13/4" (44.45mm)
METAL/WOOD
DOOR
13/4" (44.45mm)
METAL/WOOD
DOOR
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E =
11
" X
11
"
CU
T G
LA
SS
= 9
1/4
" X
9 1
/4"
EX
PO
SE
D G
LA
SS
= 8
" X
8"
1/2"
(12.7 mm)
11/16"
(17.46 mm)
3/4"
(19.05 mm)
18 GA. STEEL PANEL
16 GA. STEEL
3/4" X 3/4"
SECURITY GRILLE
1/4" (6.35 mm)
POLYCARBONATE PLASTIC
2" WINDOW LATCH BOLT
1-15/16"
(49.21 mm)
L-VGLF-SF (11” X 11”)Security Lite Kit
STANDARD FEATURES* 18 ga. cold rolled steel * Mitered and welded corners* For 1 3/4” hollow metal/wood doors* 1/4” thick high impact polycarbonate plastic* 16 ga. steel 3/4” x 3/4” security grille* 18 ga steel hinged panel with bolt latch* No exposed fasteners on outside of door* Low-profile frame * 8”x 8” exposed glass size* 2.8 oz. Silicone sealant included* Standard finish = (GPZ) Gray
Primer
OPTIONAL FEATURES* Torx security screws* See page L2 for optional finishes* Zinc electro-plating
not to scale
not to scale
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-VG
LF
-SF
L-V
GL
F-O
G
Sec
uri
ty L
ite
Kit
s
L 17
1-1/2"
1"
3/32"(2.38 mm)
1/2"
3/8"(9.525 mm)
1/4" GLASS
BY OTHERS
GLAZING EACH SIDE
HOLLOW METAL
OR WOOD DOOR
HOLLOW METAL
OR WOOD DOOR
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
CU
T G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 1
"
EX
PO
SE
D G
LA
SS
= O
RD
ER
SIZ
E L
ES
S 2
"
1 3/4"
STANDARD FEATURES* 20 ga. cold rolled steel* Countersunk mounting screw-holes* #8 Phillips head SMS* For 1 3/4” door, accepts 3/16”, 1/4”, or 5/16”glass* Putty (beige) finish standard* Available in 12”, 18” and 24” sizes only
OPTIONAL FEATURES* Gray primer and dark bronze finishes * Zinc electro-plating* Galvanneal - A40 steel * Glass & Glazing tape (Pages L23-L27)
UL10C POSITIVE PRESSURE FIRE-RATED* Fire-rated 1/4” wire glass:
20 min. requires closed cell PVC foam glazing tape like NGP GT-116.45, 60, 90 min. requires NGP 9800 or 3M GIS intumescent glazing tape.
* Fire-Lite® NT, FireLite® Plus or Fireglass 20TM requires closed cell PVC foam glazing tape like NGP GT-116 or GT-118.
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
L-FRA-100-RDRound Glass Vision Lite Kit, Self Attaching
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comR
ou
nd
L
ite Kits L
-FR
A100-R
D
not to scale
L 18
undersized 1/8" for clearance
1 1/4"
(31.75 mm
1/2"
(12.7 mm)
1/2"
(12.7 mm)
1-1/16"
(26.99 mm)
1-1/4"
(31.75 mm
3/16"
(4.76 mm
1-3/4"
(44.45 mm) 3/16"
(4.76 mm)
THRU BOLTS ALSO
AVAILABLE UPON
REQUEST
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
1/2"
(12.7 mm)
EXTERIORINTERIOR
METAL DOOR
WOOD DOOR
STANDARD FEATURES* 18 ga. cold rolled steel * Mitered and welded corners* Welded reinforcing clips at corners* Inverted “V” design* Blades 24 ga. steel; hemmed edges* Counter-sunk mounting screw-holes interior side* #8 x 3/4” Phillips head SMS* Available in uneven and fractional sizes* Matches L-GLF100 Series glass frame* Free area = 70%* Standard finish = (GPZ) Gray Primer
OPTIONAL FEATURES* Thru Bolts - specify L-700-RX-TB* Aluminum 18 x 16 mesh insect screen (installed
on exterior side unless noted otherwise)* Torx Security Screws* See Page L2 for optional finishes* Galvanneal - A40 Steel* Zinc electro-plating
L-700-RXSelf Attaching, No Vision Door Louver for 1 3/4” Thick Doors
not to scale
Designed for use on 1 3/4” thick doors manufacturedwithin door industry tolerance of +/- 1/16”.
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-700
RX
S
elf A
ttac
hin
g,N
o-V
isio
n L
ou
ver
L 19
1/2" (12.7 mm)
1/2" (12.7 mm)
11/4"
(31.75mm)
15/16"
(23.81 mm)
11/16"
(26.99 mm)11/16"
(26.99 mm)
3/16" (4.76 mm)
90 o
90o
1/8" (3.18 mm)
1/8" (3.18 mm)
13/4" (44.45)
11/32" (26.19 mm)
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
L-700-C L-700-A
METALDOOR
METALDOOR
L-700-B L-700-BF
DO
OR
CU
TO
UT
& O
RD
ER
SIZ
E
WOODDOOR
WOODDOOR
undersized 3/16" for clearance
undersized 1/16" for clearance
undersized 1/16" for clearance
not undersized for clearance
Adjusts for 1 3/8”, 1 3/4” up to 2 1/4”Thick Doors
STANDARD FEATURES* 20 ga. cold rolled steel frame* Mitered and welded corners* Welded reinforcing clips at corners* Inverted “V” design* Blades 24 ga. steel; hemmed edges* Counter-sunk mounting screw-holes* #8 x 3/4” Phillips head TEK screws* Available in uneven and fractional sizes* Standard finish = (GPZ) Gray Primer * Free area = 70%
OPTIONAL FEATURES* Thru bolts (TB) for 1-3/4” door when specified* Aluminum 18 x 16 mesh insect screen (installed on
exterior side unless noted otherwise)* Torx Security Screws* See Page L2 for optional finishes* Zinc electro-plating* Galvanneal A40 Steel (L-700-A and L-700-C only)
L-700 SERIESNo Vision Door and Partition Louver
not to scale
Install L-700-C & L-700-A by using glassstop or moulding (supplied by others).
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comN
o V
ision
Do
or an
d P
artition
Lo
uver L
-700
L 20
STANDARD FEATURES
* 18 ga. cold rolled steel frame* 18 ga. cold rolled steel adjustable “Z” blades* Mitered and welded corners* Free area = 40%
* 165o Fusible link (90 minute fire rated)* #8 x 1” phillips head SMS* Gray Primer Finish standard
OPTIONAL FEATURES
* Dark Bronze or Putty (Beige) Finish* Stainless steel #304, #4 finish* Aluminum 18 x 16 mesh insect screen
(installed on exterior side)* Torx Security screws* Thicker doors (up to 2 1/8”)* Odd inch sizes (maximum 24” x 24”,
minimum 12” x 6”)
3/16"(4.76 mm)
165° FUSIBLE LINK &HEAT SLOT AT TOP
13/4"(44.45 mm)
1" (25.4mm)
OPERATING LEVER
OR
DE
R S
IZE
LE
SS
1/8
" (3
.18m
m)
OR
DE
R S
IZE
& D
OO
R C
UT
OU
T
OR
DE
R S
IZE
PLU
S 7
/8"
(22.
22m
m)
(O.D
. FR
AM
E)
STOPBLADE
3/16"(4.76 mm)
top view
LISTED
Fire Door Glass Light Frame
UL10B, UL10C
Complies with
UBC 7-2 (1997), IBC
requires fire-rated glass
& glazing tape
undersized 1/8” for clearance
not to scale
Stock SizesAvailable12 x 1218 x 1218 x 1824 x 1224 x 1824 x 24
L-1900 Fusible Link Louver for 1 3/4” Thick Fire-Rated Doors
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-190
0 F
usi
ble
Lin
k L
ou
ver
L 21
1/2" (12.7 mm)
1/2" (12.7 mm)
11/4"
(31.75mm)
15/16"
(23.81 mm)
11/16"
(26.99 mm)11/16"
(26.99 mm)
3/16" (4.76 mm)
90 o
90 o
1/8" (3.18 mm)
1/8" (3.18 mm)
13/4" (44.45)
11/32" (26.19 mm)
DO
OR
CU
TO
UT
=
OR
DE
R S
IZE
DO
OR
CU
TO
UT
=
OR
DE
R S
IZE
L-A700-C L-A700-A
METALDOOR
METALDOOR
L-A700-B L-A700-BF
DO
OR
CU
TO
UT
= O
RD
ER
SIZ
E
1/8
" (3
.18
mm
) U
ND
ER
LIS
TE
D S
IZE
WOODDOOR
WOODDOOR
Aluminum No Vision Door and Partition LouverAdjusts for 1 3/8”, 1 3/4” up to 2 1/4” Thick Doors
L-A700 SERIES
STANDARD FEATURES* Frame .050 extruded aluminum* Mitered corners secured with reinforcing clips* Inverted “V” design* Blades .050 extruded aluminum* Counter-sunk mounting screw-holes
interior side.* #8 x 3/4” Phillips TEK screws* Available in uneven and fractional sizes* Standard finish - Clear Anodized* Free area = 70%
OPTIONAL FEATURES* For exterior use specify drainage weep holes* Thru bolts (TB) for 1-3/4” door when specified* Aluminum 18 x 16 mesh insect screen
(installed on exterior side unless otherwise noted)* Torx Security Screws* See page L2 for optional finishes
not undersizedfor clearance
undersized 3/16”for clearance
undersized 1/8”for clearance
undersized 1/8”for clearance
not to scaleInstall L-A-700-C &L-A700-A by using glass stop ormoulding (supplied by others).
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comA
lum
inum
Lo
uver L
-A700
L 22
L-VRSG-2 L-VRSG-3
METAL DOOR
1 1/4"(31.75 mm)
INTERIOR EXTERIOR
1/2"12.7 mm)
DO
OR
CU
TOU
T &
OR
DE
R S
IZE
WOOD DOOR
1 1/4"(31.75 mm)
3/16"4.76 mm)
3/16"4.76 mm)
1 3/4"(44.45 mm)
1 1/8"
METAL DOOR
1 1/4"(31.75 mm)
INTERIOR EXTERIOR
1/2"12.7 mm)
DO
OR
CU
TOU
T &
OR
DE
R S
IZE
WOOD DOOR
1 1/4"(31.75 mm)
3/16"4.76 mm)
3/16"4.76 mm)
1 3/4"(44.45 mm)
1 3/16"
16 ga. 3/4" x 3/4" Security Grille 16 ga. 3/4" x 3/4"
Security Grille
L-VRSG-2, L-VRSG-3Vandal Resistant Security Louverfor 1 3/4” Thick DoorsSTANDARD FEATURES* 18 ga. cold rolled steel frame* Mitered and welded corners* Welded reinforcing clips at corners* Inverted “V” design* Blades 24 ga. steel, hemmed edges* 16 ga. steel, 3/4” x 3/4” security grille* Standard finish = (GPZ) Gray Primer * #6 x 1 3/4” Phillips Head SMS* Free area = 45%
OPTIONAL FEATURES* Thru bolts for 1 3/4” doors
(suffix - “TB”)* Aluminum 18 x 16 mesh insect
screen (installed on exterior unless otherwise noted)
* Torx Security Screws* See page L2 for optional finishes* Zinc Electro-plating* Galvanneal - A40 Steel
Undersized 1/16” for clearance Undersized 1/16” for clearance
not to scaleDesigned for use on 1 3/4” thick doors manufac-tured within door industry tolerance of +/- 1/16”.
DO
OR
CU
TO
UT
=
OR
DE
R S
IZE
METALDOOR
METALDOOR
17/8"
(47.63 mm)
7/16" (11.11 mm)
L-75 BFnot undersized for clearance
L-75 Bundersized 1/16" for clearance
15/16"
(23.81 mm)
11/4"
(31.75 mm)
1/8" (3.18 mm)
1/8" (3.18 mm)
13/4"(44.45 mm)
WOODDOOR
WOODDOOR
17/8"
(47.63 mm)
L-75 Aundersized 1/16" for clearance
L-75 SERIES Darkroom LouversAdjusts for 1 3/4” up to 2 1/4”Thick Doors
STANDARD FEATURES* 20 ga. cold rolled steel frame* Mitered and welded corners* Welded reinforcing clips at corners* Blades .040 aluminum* Counter-sunk mounting screwholes* #8 x 3/4” Phillips head TEK screws* Available in uneven and fractional
sizes.* Free area 55% * Standard finish - (TBL) Textured Black
OPTIONAL FEATURES
* Thru Bolts (TB) for 1- 3/4” door * Aluminum 18 x 16 mesh insect
screen (installed on exterior side unless noted otherwise)
* Torx Security Screws* See page L2 for optional finishes* Zinc electro-plating
not to scale
Install L-75-A by usingglass stop or moulding(supplied by others).
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-VR
SG
Sec
uri
ty G
rill
e L
ou
vers
L-7
5
Dar
k R
oo
m L
ou
vers
L 23
PILKINGTON DiamondPolished 1/4” FIRE-RATED Wire Glass
* 3/4” X 3/4” diamond pattern electrically welded steel wire mesh
* Clear glass - ground and polished both sides* Maintains integrity when fractured or subjected to a
hose stream* Etched with UL listing on each piece* Fire-rating information:
UL10B with Butyl glazing tape like NGP GT-16
UL10C, UBC7-2 (1997), NFPA 252:20 min. with closed cell PVC foam glazing tape like NGP GT-116 or GT-118.45, 60 or 90 min. with NGP 9800 or 3M GIS intumescent glazing tape.
20 & 45 minute up to 1, 296 sq. in.visible glass (max. width 54”, max. height 54”)
60 & 90 minute up to 100 sq. in.visible glass (max. width 10”, max. height 33”)
PILKINGTON GeorgianPolished 1/4” FIRE-RATED Wire Glass
* 1/2” X 1/2” square pattern electrically welded steel wire mesh
* Clear glass - ground and polished both sides* Maintains integrity when fractured or subjected to a
hose stream* Etched with UL listing on each piece* Fire-rating information:
UL10B with Butyl glazing tape like NGP GT-16
UL10C, UBC7-2 (1997), NFPA 252:20 min. with closed cell PVC foam glazing tape like NGP GT-116 or GT-118.45, 60 or 90 min. with NGP 9800 or 3M GIS intumescent glazing tape.
20 & 45 minute up to 1, 296 sq. in.visible glass (max. width 54”, max. height 54”)
60 & 90 minute up to 100 sq. in visible glass (max. width 10”, max. height 33”)
3 Ways to order glass from NGP:1. Complete with Lite Kit & Glazing tape applied both sides2. Glass with glazing tape applied both sides.3. Glass only
C L A S S I F I E D
GLAZING MATERIALS AS TO
FIRE RESISTANCE ONLY
2HFO
National Guard Products
Meets UL 9, UL 10B, UL10C
D-H-N-T-90
C L A S S I F I E D
GLAZING MATERIALS AS TO
FIRE RESISTANCE ONLY
2HFO
National Guard Products
Meets UL 9, UL 10B, UL10C
D-H-N-T-90
Etched on each piece
Etched on each piece
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comF
ire-Rated
Pilkin
gton
Wire G
lass
L 24
FIRE-LITE®NTFire-Rated, Safety-Rated Glass Ceramic with 3MTM
ScotchshieldTM Ultra Film
STANDARD - UNPOLISHED SURFACESPREMIUM - POLISHED SURFACESBOTH:* Impact safety-rated. Meets ANSI Z97.1 and CPSC 16CFR 1201 (CAT I and II)* 3/16” (5mm) thick glass ceramic with 3M TM Scotchshield TM Ultra Film* Clear and wireless* Withstands thermal shock and hose stream* Labeled with FireLite® NT logo, UL logo and Fire-rating on each piece* Fire-rating information: (Specify when ordering)
UL10B, UL10C, UBC7-2 (1997) with PVC foam glazing tape like NGP GT-116 or GT-118
20, 45 and 60 minutes (non-temp rise) up to 3,204 sq. in.visible glass (max. width 36”, max. height 89”)
90 minute (non-temp rise) up to 2,034 sq. in.visible glass (max. width 36”, max. height 56 1/2”)
3 hour (non-temp rise) 60, 90 min. (temp rise)up to 100 sq. in. visible glass (max. width 12”, max. height 33”)
3/16"
FIRE-LITE® PLUSFire-Rated, Safety-Rated Glass Ceramic
* Premium grade (polished) surfaces only* Impact safety-rated. Meets ANSI Z97.1 and
CPSC 16CFR 1201 (CAT I and II)* 5/16” (8mm) thick laminated glass ceramic* Clear and wireless* Withstands thermal shock and hose stream* Labeled with FireLite® logo, UL logo and Fire-rating
on each piece* Fire-rating information: (Specify when ordering)
UL10B, UL10C, UBC7-2 (1997) with PVC foam glazing tape like NGP GT-116 or GT-118
20, 45 and 60 minutes (non-temp rise) up to 3,204 sq. in.visible glass (max. width 36”, max. height 89”)
90 minute (non-temp rise) up to 2,034 sq. in.visible glass (max. width 36”, max. height 56 1/2”)
3 hour (non-temp rise) 60, 90 min. (temp rise) up to 100 sq. in.visible glass (max. width 12”, max. height 33”)
FIR
E-L
ITE
®P
LU
S
FIR
E-L
ITE
®NT
5/16"
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
PILKINGTON PYROSTOPTM
* Impact safety-rated. Meets ANSI Z97.1 and CPSC 16CFR 1201 (CAT I and II)
* 3/4” (19mm) or 7/8” (23mm) thick multi-layer wirelesstransparent panels with intumescent interlayers
* Protection against radiant and conductive heat* Withstands thermal shock and hose stream* Labeled with PyrostopTM logo, UL logo and Fire-rating
on each piece. Specify fire-rating when ordering.* Fire-rating information:
UL10B, UL10C, UBC7-2 (1997) with PVC foam glazing tape like NGP GT-116 or GT-118
45 minute interior doors - use 3/4” thick PyrostopTM up to 3,724 sq. in. visibleglass (max. width 41 5/8”, max. height 89 3/4”)
60 minute interior doors - use 7/8” thick PyrostopTM up to 3,724 sq. in. visibleglass (max. width 41 5/8”, max. height 89 3/4”)
FIREGLASS 20TM
* Impact safety-rated. Meets ANSI Z97.1 and CPSC 16CFR 1201 (CAT I and II)
* 1/4” (6mm) thick tempered glass (4 times stronger than wire glass)
* Clear and wireless* Labeled with Fireglass® 20 logo, UL logo
and 20 minute Fire-rating on each piece* Fire-rating information:
UL10B, UL10C, UBC7-2 (1997) with PVC foam glazing tape like NGP GT-116 or GT-118
20 minute (without hose stream) up to 3,204 sq. in. visible glass (max. width 36”, max.height 89”)
L 25
* Fits standard L-FRA100 and L-GLF100 Lite kits* Impact safety-rated meets CPSC 16CFR 1201 Cat. I and II * Complies with 2006 IBC impact safety requirements* 3/4” X 3/4” diamond pattern electrically welded steel wire mesh* Clear glass - with tough, durable safety film applied* Maintains integrity when fractured or subjected to a hose stream* Labeled with fire resistance listing on each piece* Fire-rating information:
UL10B, UL10C, UBC7-2 (1997), NFPA252:
20 minute with closed cell PVC foam glazing tape like NGP GT-116 or GT-118 up to 1,296 sq. in. visible glass (visible area: max. width 54”, max. height 54”)
45, 60, 90 minute with NGP 9800 or 3M GIS intumescent glazing tape
45 minute up to 1,296 sq. in. visible glass (visible area: max. width 54”, max. height 54”)
60 & 90 minute up to 100 sq. in visible glass (visible area: max. width 10”, max. height 33”)
Specify Fire-rating required: 20, 45, 60 or 90 minute when ordering.
C US
SuperLite 1-WTM(patented)
Fire-rated and Impact Safety-Rated 1/4” (7mm) thick wire glass with safety film
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comS
AF
TIF
IRS
TTM
Su
perlite 1-W
TM/ P
ilkingto
n P
yrosto
pTM
/ Fireglass 20
TM
L 26
TEMPERED Glass
* Impact safety-rated. Meets ANSI Z97.1 and CPSC 16CFR 1201 (CAT I and II)
* 1/4” thick clear heat treated glass* Approximately 4 times stronger than annealed
(ordinary) glass.* Breaks into small bits, not sharp pieces* Can NOT be cut after manufacturing* NOT fire-rated.
INSULATED TEMPERED Glass
* Impact safety-rated. Meets ANSI Z97.1 and CPSC 16CFR 1201 (CAT I and II)
* 1” thick - consists of two pieces of 3/16” thick clear tempered glass with 5/8” air space between andbutyl seal.
* Increased energy efficiency.* Approximately 4 times stronger than annealed
(ordinary) glass.* Breaks into small bits, not sharp pieces.* Can NOT be cut after manufacturing.* NOT fire-rated.
POLYCARBONATE HIGH IMPACT - TUFFAK A
* Impact safety-rated. Meets ANSI Z97.1 and CPSC 16CFR 1201 (CAT I and II)Burglary-resisting material. Meets UL Standard 972
* Available in 1/8”, 1/4”, 1/2” thicknesses (specify when ordering)* Colorless transparent sheet* Virtually unbreakable - 300 times stronger than ordinary glass* Unlikely to shatter or chip when bombarded with thrown rocks,
bricks or bottles.* UV stabilized to resist solar exposure* NOT Fire-rated
3/16" Tempered Glass
3/16" Tempered Glass
5/8" Air Space
1/8"
1/4"
1/2"
Thicknesses Available
3/16"1/4”
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comP
oly
carb
on
ate
Hig
h I
mp
act
In
sula
ted
Tem
per
ed G
lass
T
emp
ered
Gla
ss
L 27
* 20 ga. steel.* 4” length clip* For spot reinforcement of cut-outs in
hollow metal doors.* UL10B, UL10C tested
NGP Lite Kits on Fire-rated Hollow metal doors doNOT require L-clips or channels welded in thedoors.
L-CLIPSFor Optional Reinforcement of 1 3/4” Hollow Metal Doors
HOLLOWMETAL DOOR
GLAZING TAPE
GT-16 3/8” wide x 1/16” thick - 50’ rolls.
* Butyl rubber glazing tape with adhesive both sides. Black* For use in lite kits on UL10B Fire-rated wood-type or steel doors,
using 1/4” fire-rated wire glass, up to 90 minutes.
GT-116 3/8” wide x 1/16” - 150’ rolls
GT-118 3/8” wide x 1/8” thick - 75’ rolls.
* Closed cell PVC Foam glazing tape with adhesive both sides.* Color is black.* For use in lite kits on UL10C positive pressure fire-rated wood-
type or steel doors, using 1/4” fire-rated wire glass or Fireglass 20TM up to 20 minutes
* For use in lite kits on UL10B or UL10C fire-rated wood-type or steel doors, using Fire-Lite® NT, Fire-Lite® Plus, or Pilkington PyrostopTM glass up to 180 minutes.
9800C 1/2” wide x 1/16” thick - 17’, 21’, 150’ rolls.
* Intumescent glazing tape with protective skin one side and adhesive on other side. Color is black.
* For use in lite kits on UL10C positive pressure fire-rated wood-type or steel doors using 1/4” fire-rated wire glass, up to 90 minutes.
N AT I O N A L G U A R D P R O D U C T S , I N C .
L I T E K I T S & L O U V E R SPhone: 800-647-7874Fax: 800-255-7874
www.ngp.comL
-Clip
s,Glazin
g Tap
e
©copyright NGP 08.2007
Corporate Headquarters
NatioNal Guard ProduCts, iNC.4985 E. raines roadMemphis, tN 38118
Mailing address
p.o. Box 753430Memphis, tN 38175
s a l e s r e P r e s e N t a t i v e s
1. irst of New englandpo Box 80177 Wexford StreetNeedham heights, MA 02494ph: (781) 449-2860FAX: (781) 449-5734
2. dugan associates6800 pittsford-palmyra rd.Suite 330Fairport, Ny 14450ph: (585) 223-4204FAX: (585) 223-6461
3. Paul J. Polke Company628 route 10, Unit 1Whippany, NJ 07981ph: (973) 515-7278 (800) 526-1179FAX: (973) 515-3671
4. Mid-atlantic agents109 John robert thomas Dr.Exton, pA 19341ph: (610) 363-7611FAX: (610) 363-8752
5. Frazier Commercial sales23500 rolling Fork Waygaithersburg, MD 20882ph: (301) 482-2277FAX: (301) 482-2410
6. d.H. Bruch Marketing352 crompton Streetcharlotte, Nc 28273ph: (704) 588-5214FAX: (704) 588-6444
7. Phillips-langley associates3585 Lawrenceville-Suwanee rd., Suite 401-ASuwanee, gA 30024ph: (770) 614-0630FAX: (770) 614-0680
8. architectural Marketing associates 648 Florida central parkwayLongwood, FL 32750ph: (407) 767-9540 FAX: (407) 339-1358
9. Barrett Group6170 centre park DriveWest chester, oh 45069ph: (513) 779-9350 (800) 735-7923FAX: (513) 779-1410
10. Hardware agents5355 Northland Drive, NE, Suite cgrand rapids, Mi 49525 ph: (616) 363-3461FAX: (616) 363-3520
11. Baines Builders Productsp.o. Box 783carmel, iN 46082ph: (317) 846-9440FAX: (317) 574-0129
12. Crenshaw salesp.o. Box 46Lagrange, tN 38046ph: (901) 878-1239FAX: (901) 878-1269
13. donald a. loss & associates3603 West oklahoma Avenue Milwaukee, Wi 53215ph: (414) 384-4448FAX: (414) 384-5577
14. life safety Hardware Consultants908 huntsmoor DriveFrankfort, iL 60423 ph: (815) 464-1155FAX: (815) 464-1177
15. d.l. Neuner Company 3015 S. Brentwood BoulevardSt. Louis, Mo 63144ph: (314) 962-2377 (800) 775-9455FAX: (314) 962-6375
16. Combs & associates6190 olson Memorial highwaygolden Valley, MN 55422ph: (763) 746-3666FAX: (763) 746-3669
17. Patterson sales1966 Linn StreetNorth Kansas city, Mo 64116ph: (816) 221-3322FAX: (816) 221-5566
18. d.l. Collins associates2231-A Michigan AvenueArlington, tX 76013ph: (817)-461-1055FAX: (817) 795-1845
19. d. l. Collins associates2231-A Michigan AvenueArlington, tX 76013ph: (817)-461-1055FAX: (817) 795-1845
20. d.l. Collins associates 10510 Desert Springs circlehouston, tX 77095ph: (281) 373-0494 FAX: (281) 304-7819
21. r.J. Porter & associatespo Box 15504Lakewood, co 80215ph: (303) 233-0100FAX: (303) 972-7897
22. the Clark agency16226 S. 33rd placephoenix, AZ 85048ph: (480) 704-6601FAX: (480) 704-6602
23. irst of the Mountain states300 Mercer Way Salt Lake city, Ut 84115ph: (801) 401-5400FAX: (801) 401-5401
24. irst of the Northwest19017 120th Avenue, NE, Suite 101Bothell, WA 98011ph: (425) 686-3615FAX: (425) 686-3639
25. r.P. Boxman & associates6689 owens Drive #200 pleasanton, cA 94588ph: (925) 462-4777 FAX: (925) 846-5952
26. irst of so. California488 E. Santa clara Street, Suite 101Arcadia, cA 91006ph: 626-359-5555Fax: 626-359-1511
27. donald tucker, int’l rep 348 Amador AvenueVentura, cA 93004(po Box 4470, 93007) ph: (805) 659-1232 FAX: (603) 853-2599
28. Canadian distribution CenterK.M. thomas company360 carlingview Drivetoronto, oN M9W 5X9ph: 416-798-0611FAX: 416-798-1349
281
2
4
5
6
8
712
1115
14
16
13
1721
22
25
24
26
27
23
18
19
20
910 3
National Guard Products, Inc.The products you count on. The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com