20110420 xcal-lte operation handbook huawei v 1
TRANSCRIPT
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 1 of 15
XCAL-LTE Operation Handbook [Huawe] v.1.0
Confidential
Quick Operation Handbook
XCAL-LTE
Huawei LTE Modem
19th.Nov. 2010 ver 1.0
Presented by Accuver EMEA Ltd.
Congress House 14 Lyon Road Middlesex UK
T +44 (0)208 863 2962 F +44 (0)208 863 1688
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 2 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
Contents
Chapter 1 : How to install the upgrade patch XCAL-LTE ............................................................................... 4
1. Install XCAL-LTE using the installation version .......................................................................................... 4 2. Apply XCAL-LTE upgrade Patch (if you are guided to do so) ..................................................................... 4
Chapter 2 : How to Recall the pre-configured auto call, Display, Device configurations ........................... 5
3. Setting > Load All Settings.......................................................................................................................... 5 4. Choose ‘pre Config.set’ which you may have got from either your colleague or Accuver support team. .... 5 5. The features of this ‘Pre Config.set’ configuration shall apply the preconfigured settings automatically. You can later amend and change each of them and save alternative settings through [XCAL-LTE > Setting > Save all settings]. ................................................................................................................................................ 6 6. Auto Call > Import Scenario ........................................................................................................................ 8
Chapter 3 : Step by Step checklist in performing the XCAL-LTE measurements using Huawei UE ......... 9
7. Open XCAL-LTE ......................................................................................................................................... 9 8. Port Setting – if you have not configured it before ...................................................................................... 9 9. Alias Setting for Huawei ............................................................................................................................ 10 10. Then, Add and Edit .............................................................................................................................. 10 11. Configure DM port and Adapter ........................................................................................................... 10 12. Enable Voice Alarm by pushing Alarm Button – it should be done MANUALLY each time you open XCAL .................................................................................................................................................... 11 13. Run Auto call script ............................................................................................................................ 111 14. Monitor the status during the measurement ......................................................................................... 13 15. Log files are saved in C:/ProgramFiles/Accuver/LogData/yearmonth/date .......................................... 14
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 3 of 15
XCAL-LTE Operation Handbook [Huawe] v.1.0
Preamble This XCAL-LTE Operation Handbook intends to be read by the user who need to use HUAWEI LTE UE who are trying to install, configure and perform any measurements using XCAL-LTE. All the contents are described sequentially and can be followed one by one. The contents are separated into three categories with different objectives as explained below Chapter 1 : How to install the upgrade patch XCAL-LTE This chapter explains how to install the upgrade patch released by Accuver. This chapter can be skipped if you are already using the required version of XCAL-LTE
Chapter 2 : How to Recall the pre-configured auto call, Display, Device configurations This chapter explains how to recall and apply the configurations which have been proved to be the most suitable configuration for the project. The ‘configuration’ in this chapter includes auto call setting, display windows setting, device setting including Port settings. This chapter can be skipped once you apply this to one laptop PC as all the setting shall be recorded on the XCAL-LTE if you apply once.
Chapter 3 : Step by Step checklist in performing the XCAL-LTE measurements This chapter explains step by step procedures in performing LTE measurements using XCAL-LTE. It can be used as a check list always needs to be made sure by the Drive Test engineer.
You can download the components from the dedicated ftp server. Please contact our support team if you do not have the details. You have to have these components to follow the processes explained in this document.
Any questions concerning this document should be addressed to technical support: Technical support [email protected] T +44 (0) 208 863 1118 E [email protected] Needless to say, our aim is to best support the users so, please don’t hesitate to contact us for any enquiries.
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 4 of 15
XCAL-LTE Operation Handbook [Huawe] v.1.0
Chapter 1 : How to install the upgrade patch XCAL-LTE This chapter explains how to install the upgrade patch released by Accuver. This chapter can be skipped if you are already using the required version of XCAL-LTE
1. Install XCAL-LTE using the installation version Just follow the instructions during the installation of XCAL-LTE x.x.xx.xxx
2. Apply XCAL-LTE upgrade Patch (if you are guided to do so) � Download XCAL-LTE x.x.xx.xxx [Patch] from the FTP server indicated. � Unzip the file � Copy and Overwrite all files and folders to C:/ProgramFiles/Accuver/XCAL-LTE � Confirm the upgrade by from [XCAL-LTE > Help > About]
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 5 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
Chapter 2 : How to Recall the pre-configured auto call, Display, Device configurations
This chapter explains how to recall and apply the configurations which have been proved to be the most suitable configuration for the project. The ‘configuration’ in this chapter includes auto call setting, display windows setting, device setting including Port settings. This chapter can be skipped once you apply this to one laptop PC as all the setting shall be recorded on the XCAL-LTE if you apply once.
3. Setting > Load All Settings This is to recall all the settings saved previously.
4. Choose ‘pre Config.set’ which you may have got from either your colleague or Accuver support team.
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 6 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
5. The features of this ‘Pre Config.set’ configuration shall apply the preconfigured settings automatically. You can later amend and change each of them and save alternative settings through [XCAL-LTE > Setting > Save all settings].
� Port Setting - the screenshot below is an example of a Port Setting recalled.
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 7 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
� Sub Windows configuration – Throughput, Cell Measurements, RRC messages, etc
� Alarm Setting – Setup Fail, Traffic Fail, Call Drop, Pending, Mobile Error
� Auto Call Setting also will be recalled as configured before.
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 8 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
6. Auto Call > Import Scenario You may not have to perform this if you have applied ‘Load All Settings’ explained in the previous pages but you can use this ‘import scenario/export scenario’ feature just to share your scenarios with other teams.
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 9 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
Chapter 3 : Step by Step checklist in performing the XCAL-LTE measurements using HUAWEI
This chapter explains step by step procedures in performing LTE measurements using XCAL-LTE. It can be used as a check list always needs to be made sure by the Drive Test engineer.
7. Open XCAL-LTE
8. Port Setting – if you have not configured it before
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 10 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
9. Alias Setting for Huawei E398 . Chip Type : LTE-Qualcomm . Phone Model : Card(PCMCIA/USB) Type Phone . Data Service Type: Network Adapter . Log Mask Alias : select LTE Recommended
10. Then click on Add/ Edit button of log mask section and Voice/Data section. Click OK.
11. Configure DM port and Adapter
The devices to be configured should exist in Device manager as the screenshots below.
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 11 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
12. Enable Voice Alarm by pushing Alarm Button – it should be done MANUALLY each time you open XCAL
13. Run Auto call script Please make it sure the setting you have to perform are suitable for your measurement purpose.
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 12 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 13 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
14. Monitor the status during the measurement � LTE Data Rate Status – [XCAL-LTE > Statistics/Status > Throughput Info], you can monitor
the download & upload throughput information through this window
This document contains confidential information and/or trade secrets that are the exclusive property of Accuver Corporation, Ltd. This document may not be photocopied, altered, or reproduced in any kind without prior consent from Accuver Corporation, Ltd. This document may NOT be distributed outside the company without approval from Accuver Corporation, Ltd. Page 14 of 15
XCAL-LTE Operation Handbook [Huawei] v.2.1
� Call Process – [XCAL-LTE > Statistics/Status > Call Statistics], you can monitor the Call procedure details through this window. You will be able to monitor the current call’s status and also monitor the history of the calls during the past calls.
15. Log files are saved in C:/ProgramFiles/Accuver/LogData/yearmonth/date
END OF THE DOCUMENT