2012 - ledsunlimited · 2. 3. these high quality smd led replacement bulbs save power. energy...

2012

Updated 10/05/2012

14a Moore Street

Hillcrest

Auckland NZ

PH : 09 889 0246

[email protected]

www.ledsunlimited.co.nz

Contents

Beyond offering a fresh look, LEDS Unlimited and

Dualcom Technology can now offer more convenient

ways to search and browse product information as

well as easy access to our full range of products, trade

pricing and more.

[email protected]

14a Moore Street

Hillcrest, Auckland NZ

PH : 09 889 0246


Contact

Have you seen our new website?

G4 Bulbs (Disc) 4

G4 Bulbs (Miniature) 5

MR 11 and MR 16 Bulbs 6

10-30v DC Bayonet Bulbs 14

240v AC B22 Bayonet Bulbs 16

240v AC E27 Screw Bulbs 17

Festoon 18

T10 Wedge 20

Adaptors and Holders 21

Downlights 23

LED Tube 24

Light Bars 25

Flood Lights 27

High Bay 29

High Power Work Lights 31

Security Lighting 33

Aluminum Profile w Diffuser 34

Flexible Strip Lighting 35

RGB Controllers/ Accessories 37

LED Modules 39

Under Water Lighting 41

Panel Lighting 42

LED Tube Lighting 44

Automotive LED bulbs 45

LED flasher cans 47

Effect Lighting / Controllers 50

Street Lighting 52

LED Drivers / Power Supplies 8

PAR 38 9

Light Fittings 9

GU 10 12

Linear R7S 30

2

These high quality SMD LED replacement bulbs save

power. Energy efficient, they last up to 50 times

longer than a standard bulb. The latest SMD chip

technology is used that provides one of the highest

light output to consumption ratio available today.

G4 Bulbs Disc

GE-04-10BS-CW-SGE-04-10BS-CW-R

LED Count: 10Lumens: 165Colour Temp: Cool White 5000 - 6300KVoltage: 8 - 30v DCConsumption - Watts: 2.2Fitting config: (S) Side Pin (R) Rear Pin

GE-04-10BS-WW-S(side pin)GE-04-10BS-WW-R(rear pin)

LED Count: 10Lumens: 140Colour Temp: Warm White 2900 - 3500KVoltage: 8 - 30v DCConsumption - Watts: 2.2Fitting config: (S) Side Pin (R) Rear Pin

GE-04-6BS-CW-SGE-04-6BS-CW-R

LED Count: 6Lumens: 107Colour Temp: Cool White 5000 - 6300KVoltage: 8 - 30v DCConsumption - Watts: 1.5Fitting config: (S) Side Pin (R) Rear Pin

GE-04-6BS-WW-S(side pin)GE-04-6BS-WW-R(rear pin)

LED Count: 6Lumens: 97Colour Temp: Warm White 2900 - 3500KVoltage: 8 - 30v DCConsumption - Watts: 1.5Fitting config: (S) Side Pin (R) Rear Pin

G4 15 LED Warm White/Red Switchable

This unique LED bulb is switchable, using a single switch, between white and red.

Side G4 bi pin disc type. The white and red LEDs are all arranged on one side. Light

output is similar to a 15 - 20 watt halogen.

GE-04-3R12WBS-RSWW-S

LED Count: 15Lumens: 165Colour Temp: Red and Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 2.2Fitting config: Side Pin

6 LED10 LED


(Side) (Side)(Rear) (Rear)

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

YELLOW (YL)

RED (RD)

BLUE (BL)

GREEN (GN)

44mm

Diameter

4

G4 Bulbs Miniature

The 12 LEDs are arranged around the body and on the end. These

G4 miniature LED bulbs are designed to fit lamp fittings that are

too small to convert to other LED bulb types. Light output is

similar to a 5 - 10 watt halogen.12LED G4

15LED G4

18LED G4




similar to a 10 - 15 watt halogen.




similar to a 20 watt halogen.

GE-04-12NS-CW-TR

LED Count: 12Lumens: 60Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption - Watts: 0.5Fitting config: G4 Bi Pin

GE-04-12NS-WW-TR

LED Count: 12Lumens: 50Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 0.5Fitting config: G4 Bi Pin

GE-04-15NS-CW-TR


GE-04-15NS-WW-TR


GE-04-18NS-CW-TR


GE-04-18NS-WW-TR


Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

G4 15 LED - Dimmable

Approximately the same size as a standard G4 halogen bulb. The 15 LEDs are

arranged on one side so that no reflector is required. Designed to fit lamps

fittings that are too small to convert to other LED bulb types. A Sensibulb

Mini Dimmer may be used. Light output is similar to a 10 - 20 watt halogen.

G4-06-CW

LED Count: 15Lumens: 105Colour Temp: Cool White 5000 - 6300KVoltage: 12 or 24v DCConsumption - Watts: 1.5Fitting config: G4 Bi Pin

G4-06-WW

LED Count: 15Lumens: 95Colour Temp: Warm White 2900 - 3500KVoltage: 12 or 24v DCConsumption - Watts: 1.5Fitting config: G4 Bi Pin

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

5

MR 11

MR 16

MR 11 - 6 LEDMR 11 - 6 LED

MR 11 - 10 LEDMR 11 - 10 LED

MR 16 - 9 Watt Dimmable

GE-11-6BS-CW-CGE-11-6BS-WW-C

LED Count: 6Lumens: 107 (cool) 97 (warm)Colour Temp: Cool White 5000 - 6300KColour Temp: Warm White 2900 - 3500KVoltage: 8 - 30v DCConsumption - Watts: 1.5Fitting config: G4 Base

RQ-11-10BS-CWRQ-11-10BS-WW

LED Count: 10Lumens: 165 (cool) 140 (warm)Colour Temp: Cool White 5000 6300KColour Temp: Warm White 2900 - 3500KVoltage: 8 - 30v DCConsumption - Watts: 2.2Fitting config: G4 Base

The 6 LEDs are arranged inside the standard MR11 reflector unit. Ideal for light shelves,

paintings, rangehoods or over tables.

High powered replacement LED MR 16 lamps. Available in a warm white or a cool

white light. 60 degree beam angle ideal for all residential and commercial

applications.

RQ-MR16-3X3DEWW(warm white)

LED Count: 3Lumens: 820Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 9Fitting config: G5.3 BaseBeam Angle: 60 degreesDimmable: Yes - Leading Edge

RQ-MR16-3X3DECW(cool white)

LED Count: 3Lumens: 900Colour Temp: Cool White 6000KVoltage: 8 - 30v DCConsumption - Watts: 9Fitting config: G5.3 BaseBeam Angle: 60 degreesDimmable: Yes - Leading Edge

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

5.3

MR 16 - Machined HousingMR 16 - Machined Housing

MR 16 - Turbo Diecast HousingMR 16 - Turbo Diecast Housing

GE-53-3PI-WW-L-M(warm white)

LED Count: 3Lumens: 220Colour Temp: Warm White 2900 - 3500KVoltage: 8 - 30v DCConsumption - Watts: 3.1Fitting config: G5.3 BaseDimmable: No

GE-53-3PI-CW-L-D(cool white)

LED Count: 3Lumens: 240Colour Temp: Cool White 5000 - 6300KVoltage: 8 - 30v DCConsumption - Watts: 3.1Fitting config: G5.3 BaseDimmable: No

6

MR 16 - 15 LED

GE-53-15BS-CW-NGE-53-15BS-WW-N

LED Count: 15Lumens: 240 (cool) 225 (warm)Colour Temp: Cool White 5000 - 6300KColour Temp: Warm White 2900 - 2500KVoltage: 8 - 30v DCConsumption - Watts: 3.0Fitting config: G5.3 Base

The 15 LEDs are arranged inside the standard MR16 reflector unit. These bulbs

actually give a more even spread of light than most halogens with no "hot

spots" when used to light shelves, paintings or over tables. Light output is

similar to a 20 - 25 watt halogen. Commonly used in households, motorhomes

and boats.

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

MR 16 - 15 LEDMR 16 - 15 LED

This lamp is a common replacement for areas in boats and motorhomes, the 10

LEDs are arranged inside the standard MR16 reflector unit. Light output is

similar to a 15 watt halogen.

GE-53-10BS-CW-C

LED Count: 10Lumens: 165Colour Temp: Cool White 5000 - 6300KVoltage: 8 - 30v DCConsumption - Watts: 2.2Fitting config: G5.3 BaseDimmable: No

GE-53-10BS-WW-C

LED Count: 10Lumens: 140Colour Temp: Warm White 2900 - 3500KVoltage: 12 or 24v DCConsumption - Watts: 2.2Fitting config: G5.3 BaseDimmable: No

MR 16 - 10 LEDMR 16 - 10 LED Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

YELLOW (YL)

RED (RD)

BLUE (BL)

GREEN (GN)

MR 16 - 10 LED

7

LED Drivers

SNP15-12VL-SAA(15 Watt - 12v DC)

Input Voltage: 200-240VAC Output Power: 15WConstant Output Voltage: 12v DCMax Output Current: 1.25ADimension: L123xW45xH19mmApprovals: CE, RoHS, SAA Approval

Open Circuit;Short Circuit;Over Load;Over Heat ProtectionSafety According to EN61347-1,EN61347-2-13EMI According to En55015EMS According to EN61000-3-2;EN61000-3-3;EN61547

SNP30-12VL-SAA(30 watt - 12v DC)



SNP30-24VF-SAA(30 Watt - 24v DC)



CE, RoHS, SAA Approval




LPV-SERIES - WATERPROOF

LPV-35 - (35 Watt)LPV-60 - (60 Watt)LPV-100 - (100 Watt)

Input Voltage: 180-264v AC Output Power: 35,60 or 100 wattsConstant Output Voltage: 12 or 24v DCApprovals: CE, RoHS, SAA ApprovalIP Rating: IP67Protection: Open Circuit, Short Circuit, Over Load, withstand 300vAC surge input for 5 seconds.Dimensions: 35 Watt = L148xW40xH30mm60 Watt = L162.5xW42.5xH32mm100 Watt = L190xW52xH37mm

HLG-SERIES

HLG-150 - (150 Watt)HLG-185 - (185 Watt)HLG-240 - (240 Watt)

Input Voltage: 90-264v AC Output Power: 150,185 or 240wattsConstant Output Voltage: 12 or 24v DCApprovals: CE, RoHS, SAA ApprovalIP Rating: IP67Protection: Open Circuit, Short Circuit, Over TempDimensions: 150 Watt = L222.2xW68xH38.8mm185 Watt = L222.2xW68xH38.8mm240 Watt = L244.2xW68xH38.8mm

8CE, RoHS, SAA Approval

PAR 38 E27 Base

GE-P38-42BS-CW-C

LED Count: 42Lumens: 682Colour Temp: Cool White 5000 - 6300KVoltage: 85- 264v ACConsumption - Watts: 9.0Fitting config: E27 Base

GE-P38-16W-CW-C

LED Count: 42Lumens: 1100Colour Temp: Cool White 5000 - 6300KVoltage: 85- 264v ACConsumption - Watts: 16.0Fitting config: E27 Base

PAR38 - 9 Watt

PAR38 - 16 Watt

Light Fittings

RQ-LVSL-TAU-BR RQ-LVSL-TAU-SC

Taurus

These attractive extra low voltage (12v or 24v only) light fittings are designed to accept the MR16 type bulb (G5.4 base). Swivel the head to direct the light where you need it.

RQ-LVSL-GAR-BR RQ-LVSL-GAR-SC

Garnet

(RQ-CAB-DL-75) (RQ-CAB-DL-65)Cabinet Down Light 75mm Cabinet Down Light 65mm

Reading Lights

Cabinet Lights

www.ledsunlimited.co.nz 9

FLUORESCENT LIGHT REPLACEMENTFLUORESCENT LIGHT REPLACEMENT

ULTRA COMPACT DESIGNULTRA COMPACT DESIGN

Light Fittings JM-SERIES

JM-701S-W-CW

JM-703S-W-CW

JM-703S-S-CW

JM-701S-W-CW(white end caps)JM-701S-S-CW(silver end caps)

LED Count: 60Lumens: 508Colour Temp: Cool White 5000 - 6300KVoltage: 12 - 24v DCConsumption - Watts: 4.8Fitting config: Surface mountDimensions: 383 x 70.4 x 18mm

JM-701S-W-WW(white end caps)JM-701S-S-WW(silver end caps)

LED Count: 60Lumens: 483Colour Temp: Warm White 2800 - 3000KVoltage: 12 or 24v DCConsumption - Watts: 4.8Fitting config: Surface mount

JM-703S-W-CW(white end caps)JM-703S-S-CW(silver end caps)

LED Count: 60Lumens: 508Colour Temp: Cool White 5000 - 6300KVoltage: 12 - 24v DCConsumption - Watts: 4.8Fitting config: Surface mountDimensions: 249 x 70.4 x 18mm

JM-703S-W-WW(white end caps)JM-703S-S-WW(silver end caps)

LED Count: 60Lumens: 483Colour Temp: Warm White 2800 - 3000KVoltage: 12 or 24v DCConsumption - Watts: 4.8Fitting config: Surface mountDimensions: 249 x 70.4 x 18mm

These smart white surface mount LED interior

light is based on the fluorescent style in shape

but of a much lower profile. Ideal if you need

plenty of light but not alot of room to mount a

light.

The switch is glow in the dark and is mounted in

one of the ends. This fitting has the option of

white or silver ABS end caps and complete with

silver anodised housing and clear diamond

polycarbonate lens.

Surface mount and very easy to install.

10

JM-801S-S-CW(silver cover)JM-801S-W-CW(white cover)JM-801S-C-CW(chrome cover)

LED Count: 12Colour Temp: Cool White 5000 - 6300KVoltage: 12v DCConsumption - Watts: 1.0Fitting config: Surface Mount

Interior Light - With Switch

Light Fittings continued . .

JM-825-W-CW(white cover)

LED Count: 24Colour Temp: Cool White 5000 - 6300KVoltage: 12v DCConsumption - Watts: 1.9Fitting config: Surface Mount

Interior Light

JM-825-W-WW(white cover)

LED Count: 24Colour Temp: Warm White 2900 - 3500KVoltage: 12v DCConsumption - Watts: 1.9Fitting config: Surface Mount

This smart white surface mount interior light uses 24

SMD 3528 Cool White LEDs. This attractive low profile

surface mount fitting, only 8.8mm high, provides a

simple solution to complex lighting scenarios. White

ABS with clear diamond polycarbonate lens. Very easy

to install.

CHROME COVER - 12v DC

JM-801S-C-CW (cool white)





SILVER COVER - 12v DC

JM-801S-S-CW (cool white)





WHITE COVER - 12v DC

JM-801S-W-CW (cool white)





*Non switched models also available

11

GU 10 GU 10


Gu10 - 9 Watt Dimmable

Gu10 - 6 Watt Dimmable

High powered replacement LED GU10 lamps. Available in a warm white or a cool

white light. 60 degree beam angle ideal for all residential and commercial

applications.

RQ-GU10-3X3DEWW

LED Count: 3Lumens: 820Colour Temp: Warm White 2900 - 3500KVoltage: 85 - 264v ACConsumption - Watts: 9Fitting config: GU 10Beam Angle: 60 degreesDimmable: Yes - Leading Edge

RQ-MR16-3X2DEWW

LED Count: 3Lumens: 600Colour Temp: Warm White 2900 - 3500KVoltage: 85 - 264v ACConsumption - Watts: 6Fitting config: GU 10Beam Angle: 60 d egreesDimmable: Yes - Leading Edge

RQ-GU10-3X3DECW

LED Count: 3Lumens: 900Colour Temp: Cool White 6000KVoltage: 85 - 264v ACConsumption - Watts: 9Fitting config: GU 10Beam Angle: 60 degreesDimmable: Yes - Leading Edge

RQ-MR16-3X2DECW

LED Count: 3Lumens: 700Colour Temp: Cool White 6000KVoltage: 85 - 264v ACConsumption - Watts: 6Fitting config: GU 10Beam Angle: 60 degreesDimmable: Yes - Leading Edge

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

GU 10 - Spot

GE-10-3PI-WW-L

(Turbo Housing)

GE-10-3PI-WW-L

LED Count: 3Lumens: 210Colour Temp: Warm White 2900 - 3500KVoltage: 85 - 264 V ACConsumption - Watts: 4.1Fitting config: GU 10Dimmable: NoBeam Angle: 35 degrees

Colours Available

WARM WHITE (WW)

12

GU 10 continued . .


15 LED GU10 replacement lamp. These bulbs actually give a more even spread

of light than most halogens with no "hot spots" when used to light shelves,

paintings or over tables. Light output is similar to a 20 - 25 watt halogen.

These high quality SMD LED replacement bulbs save power. Energy efficient,

they last up to 50 times longer than a standard bulb. The latest SMD chip

technology is used that provides one of the highest light output to consumption

ratios available today.

GE-10-15BS-WW-N

LED Count: 15Lumens: 210Colour Temp: Warm White 2900 - 3500KVoltage: 85 - 264v ACConsumption - Watts: 3.5Fitting config: GU 10

GE-10-15BS-CW-N

LED Count: 15Lumens: 241Colour Temp: Cool White 5000 - 6500KVoltage: 85 - 264v ACConsumption - Watts: 3.5Fitting config: GU 10

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

13

BayonetRotates 359º directing light where you want it. The 12 LEDs are arranged on one side that can be rotated. Light

output is similar to a 20 watt halogen bulb. Can be used in the Smart Light 1000®

REVM30

LED Count: 12Lumens: 200Colour Temp: Cool White 5000 - 6300KVoltage: 11 to 15v DCConsumption - Watts: 2.5Fitting config: Single Contact Parallel Pin

GE-15S-15SS-CW-C (single)GE-15D-15SS-CW-C(double)GE-Y15D-15SS-CW-C (double offset)

LED Count: 15Lumens: 100Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption - Watts: 1.4Fitting config:

GE-15S-15SS-WW-C (single)GE-15D-15SS-WW-C(double)GE-Y15D-15SS-WW-C (double offset)

LED Count: 15Lumens: 92Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 1.4Fitting config:

REV1156

LED Count: 11Lumens: 170Colour Temp: Cool White 5000 - 6300KVoltage: 12v DCConsumption - Watts: 1.4Fitting config: Single Contact Parallel

GE-15S-18BS-CW-C (single)GE-15D-18BS-CW-C(double)GE-Y15D-18BS-CW-C (double offset)


GE-15S-18BS-WW-C (single)GE-15D-18BS-WW-C(double)GE-Y15D-18BS-WW-C (double offset)


The 15 LEDs are located 3

on 4 sides (12) and 3 on the

end, cleverly encased in a

glass housing to resemble a

standard bulb without the

heat. Similar light output to

a 10 to 15 Watt

incandescent bulb.

Bayonet single contact with parallel

pins. 11 SMD5050 LEDs, measuring

20mm dia and 42mm long this bulb

is designed to fit those smaller and

shorter spaces that many LED bulbs

can't fit.

GE-15S-15SS-XX-CBayonet - 15 LED Globe - Available in Single Contact, Double Contact and Double Contact w/offset Pin

Bayonet - Single Contact Bayonet - Single Contact Parallel Pin 11 LED Parallel Pin 11 LED

Colours Available

Colours Available

Colours Available

COOL WHITE (CW)

COOL WHITE (CW)

WARM WHITE (WW)

WARM WHITE (WW)

WARM WHITE (WW)

Colours Available

COOL WHITE (CW)

Bayonet - 18 LED - Available in Single Contact, Double Contact and Double Contact w/offset Pin

Single Contact Parallel PinDouble Contact Parallel PinDouble Contact Offset Pin



Single Contact Parallel PinDouble Contact Parallel PinDouble Contact Offset Pin 14

LN-15S-21BS-TR-30D-CW-00(single)LN-15D-21BS-TR-30D-CW-00(double)LN-Y15D-21BS-TR-30D-CW-00(double offset)


LN-15S-21BS-TR-30D-WW-00(single)LN-15D-21BS-TR-30D-WW-00(double)LN-Y15D-21BS-TR-30D-WW-00(double offset)


Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

Bayonet - 21 LED - Available in Single Contact, Double Contact and Double Contact w/offset Pin

LN-15S-6BS-30D-CW-00(single)LN-15D-6BS-30D-CW-00(double)

LED Count: 6Lumens: 107Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption - Watts: 1.5

LN-15S-6BS-30D-WW-00

(single)

LN-15D-6BS-30D-WW-00

(double)

LED Count: 6Lumens: 97Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 1.5

The 6 LEDs are located

on the end directing light

straight out. Similar

light output to a 10 watt

halogen. These high

quality 5050 SMD LED

replacement bulbs save

power.

Bayonet - 6 LED - Available in Single and Double Contact

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)



15

LN-A19-22-10MS-HT-WWB22 Bayonet

Patented design provides for good thermal

conductivity that extends the life of the LED

chips. This model is an excellent replacement

for all standard incandescent light bulbs. The

high quality SMD 3014 Epistar LED used in

this replacement bulb saves power.

240v AC

HD-BB22-36CW-A00A

Lumens: 330Colour Temp: Cool White 5000 - 6300KVoltage: 230v ACConsumption - Watts: 4.5Fitting config: B22

LN-A19-22-10MS-HT-CW

Lumens: 365Colour Temp: Cool White 5000 - 6300KVoltage: 230v ACConsumption - Watts: 6Fitting config: B22

HD-BB22-88CW-A02A


HD-BB22-60CW-A01A

Lumens: 530Colour Temp: Cool White 5000 - 6300KVoltage: 230v ACConsumption - Watts: 6.5Fitting config: B22

HD-BB22-110CW-A03A


HD-BB22-36WW-A00A

Lumens: 300Colour Temp: Warm White 2900 - 3500KVoltage: 230v ACConsumption - Watts: 4.5Fitting config: B22


Lumens: 335Colour Temp: Warm White 2900 - 3500KVoltage: 230v ACConsumption - Watts: 6Fitting config: B22

HD-BB22-88WW-A02A


HD-BB22-60WW-A01A

Lumens: 500Colour Temp: Warm White 2900 - 3500KVoltage: 230v ACConsumption - Watts: 6.5Fitting config: B22

HD-BB22-110WW-A03A


4.5 Watt - Replaces 50watt Incandescent

6 Watt Dimmable CREE - Replaces 50watt Incandescent

8 Watt - Exceeds performance of std 75 watt incandescent

6.5 Watt - Replaces 75 watt Incandescent



HD-BB22-XXXX-A0XA

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

RED (RD)

BLUE (BL)

GREEN (GN)

16

LN-A19-22-10MS-HT-WWE27 Screw

Patented design provides for good thermal

conductivity that extends the life of the LED

chips. This model is an excellent

replacement for all standard incandescent

light bulbs. The high quality SMD 3014

Epistar LED used in this replacement bulb

saves power.

240v AC

HD-E27-36CW-A00A


HD-E27-88CW-A02A


HD-E27-60CW-A01A


HD-E27-110CW-A03A


HD-E27-36WW-A00A


HD-E27-88WW-A02A


HD-E27-60WW-A01A


HD-E27-110WW-A03A


4.5 Watt - Replaces 50watt Incandescent


6.5 Watt - Replaces 75 watt Incandescent


Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

RED (RD)

BLUE (BL)

GREEN (GN)

17

Festoon

GE-F31-4BS-CW

LED Count: 4Lumens: 72Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption - Watts: 0.9Fitting config: Festoon Spade

GE-F31-4BS-WW

LED Count: 4Lumens: 60Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 0.9Fitting config: Festoon Spade

GE-F37-6BS-CW


GE-F37-6BS-WW


GE-F42-6BS-CW


GE-F42-6BS-WW


GE-F42-9BS-CW


GE-F42-9BS-WW


The 4 LEDs on this 31mm

festoon are arranged on one

side. Light output is similar

to a 5 - 10 watt halogen

bulb.




to a 10 watt halogen bulb.




to a 10 watt halogen bulb.


festoon are arranged on

three side over 180º. Light

output is similar to a 15 - 20

watt halogen bulb.

31mm 4 x LED

37mm 6 x LED

42mm 6 x LED

42mm 9 x LED


Colours Available

Colours Available

Colours Available

Colours Available

COOL WHITE (CW)

COOL WHITE (CW)

COOL WHITE (CW)

COOL WHITE (CW)

WARM WHITE (WW)

WARM WHITE (WW)

WARM WHITE (WW)

WARM WHITE (WW)

Spade

18

GE-BL43-12SS-CW-TR

LED Count: 12Lumens: 84Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 16v DCConsumption - Watts: 1.0Fitting config: Barrel (8.9mm)

GE-BL43-12SS-WW-TR

LED Count: 12Lumens: 80Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 16v DCConsumption - Watts: 1.0Fitting config: Barrel (8.9mm)

GE-BL43-30SS-CW-TR

LED Count: 30Lumens: 180Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption - Watts: 3.6Fitting config: Barrel (8.9mm)

GE-BL43-30SS-WW-TR

LED Count: 30Lumens: 175Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 3.6Fitting config: Barrel (8.9mm)


Barrel bulb are arranged

around the circumference of

the barrel. Light output is

similar to a 10 watt halogen

bulb.


Barrel bulb are arranged

around the circumference of

the barrel. Light output is


bulb.

43mm 12 x LED

43mm 30 x LED


Festoon Barrel Bulb

Barrel (Aquasignal Festoon) 43mm LED bulbs replace the common Barrel bulbs that are used in many lighting applications including automotive and marine.

GE-BL43-30SS-RD-TR

43mm 30 x Red LED

GE-BL43-30SS-RD-TR

43mm 12 x Red LED

GE-BL43-30SS-GN-TR

43mm 30 x Green LED

GE-BL43-30SS-GN-TR

43mm 12 x Green LED

Other colours available

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

RED (RD)

GREEN (GN)

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

RED (RD)

GREEN (GN)

Festoon Barrel (Aquasignal)

19

T10 Wedge

GE-T10-6BS-CW-S(side pin)GE-T10-6BS-CW-R(rear pin)

LED Count: 6Lumens: 107Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption Watts: 1.5Fitting config: T10 Side or Rear Pin

GE-T10-6BS-WW-S(side pin)GE-T10-6BS-WW-R(rear pin)

LED Count: 6Lumens: 97Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 1.5Fitting config: T10 Side or Rear Pin

RQ-T10-15BS-CW-S(side pin)

LED Count: 15Lumens: 240Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption Watts: 2.0Fitting config: T10

GE-T10-6BS-WW-S(side pin)

LED Count: 15Lumens: 220Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 2.0Fitting config: T10

GE-T10-10BS-CW-S(side pin)GE-T10-10BS-CW-R(rear pin)

LED Count: 10Lumens: 140Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DCConsumption Watts: 2.2Fitting config: T10 Side or Rear Pin

GE-T10-10BS-WW-S(side pin)GE-T10-10BS-WW-R(rear pin)

LED Count: 10Lumens: 138Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 2.2Fitting config: T10 Side Pin or Rear Pin

The 6 LEDs are arranged on

one side. Light output is


bulb.

The 15 LEDs are

arranged on one side.

Light output is similar to

a 20 - 25 watt halogen

bulb.

The 10 LEDs are arranged on

one side. Light output is


bulb.

(Rear)

(Side)

(Side)


(Rear)

Colours Available

Colours Available

Colours Available

COOL WHITE (CW)

COOL WHITE (CW)

COOL WHITE (CW)

WARM WHITE (WW)

WARM WHITE (WW)

WARM WHITE (WW)

T10 15 x LED

20

Adaptors

GE-ADPTR-BA15S-G4 Fitting config: G4 to BA15S Single Contact - Parallel Pin

GE-ADPTR-BA15D-G4

Fitting config: G4 to BA15D Double Contact - Parallel PinMarine wired

GE-ADPTR-BAY15D-G4Fitting config: G4 to BAY15D Double Contact - Off set PinsMarine wired

GE-ADPTR-GU10-G4 Fitting config: G4 to GU10 Two Pin

GE-ADPTR-E14-G4 Fitting config: G4 Bi Pin to E14

GE-ADPTR-E27-G4 Fitting config: G4 Bi Pin to E27

MR Socket Fitting config: Bi Pin Cable Length 200mm

G4 bi pin to GU10 Socket Adaptor.

Convert the old style GU10 bulb

fittings to accept G4 miniature

and disc LED range of bulbs.

12/24v DC ONLY.

G4 bi pin to E14 Socket Adaptor.

Convert the old style E14 bulb



12/24v DC ONLY.

G4 bi pin to E27 Socket Adaptor.

Convert the old style E27 bulb



12/24v DC ONLY.

G4 bi pin ceramic socket. Will fit

any G4 bi pin type bulb including

MR16 and MR11. Fix with two

screw holes.

G4 Bi Pin to Single Contact Bayonet Adaptor

G4 Bi Pin to Double Contact Bayonet Adaptor

G4 Bi Pin to Double Contact Bayonet Adaptor (OFFSET)

G4 Bi Pin to GU10 Adaptor

G4 Bi Pin to E14 Adaptor

G4 Bi Pin to E27 Adaptor

G4 Bi Pin Ceramic Socket

For ELV (Extra Low Voltage) use only



21

Adaptors

RQ-ADPTR-B22-E27 Fitting config: E27 Screw to B22 Base

RQ-ADPTR-E27-B22 Fitting config: B22 to E27 Screw Base

RQ-ADPTR-E27-B22 Fitting config : Gu10 Bulb to E27 Screw Base

E27 to B22 Adaptor

B22 to E27 Adaptor

Gu10 to E27 Adaptor

E27 Socket to B22 (male)

Adaptor. Convert the B22

type bulb fittings to

accept E27 screw in

bulbs.

B22 Socket to E27 (male)

Adaptor. Convert the E27

type bulb fittings to

accept B22 bayonet

bulbs.

Gu10 Socket to E27

(male) Adaptor. Convert

the E27 type bulb fittings

to accept GU10 bulbs.

15mm Bayonet lamp holder - Available in single contact, double contact and double offset




RQ-HOLD-BA15S(single contact)

Single contact 15mm bayonet holder. Accepts BA15S, 1156

RQ-HOLD-BA15D(double contact)

Double contact 15mm bayonet holder. Accepts BA15D, 1142

RQ-HOLD-BA15D(double contact offset)

Double contact offset 15mm bayonet holder. Accepts BAY15D, 1157

22

Downlights

GE-J27-3P1-CW

LED Count: 3Lumens: 255Colour Temp: Cool White 5000 - 6300KVoltage: 85- 264v ACConsumption - Watts: 4.1Fitting config: MR16 to E27 Base


JDR MR16 3 LED Spotlight Bulb Cool White

RQ-AR111-6*2-12-CW

Led Count: 6Lumens: 420Colour Temp: Cool White 5000 - 6300KVoltage: 12v DCConsumption - Watts: 12Fitting config: AR 111 to G53 Base

RQ-AR111-9*1-12-CW

Led Count: 9Lumens: 400Colour Temp: Cool White 5000 - 6300KVoltage: 12v DCConsumption - Watts: 9.0Fitting config: AR 111 to G53 Base

RQ-AR111-6*2-12-WW

Led Count: 6Lumens: 380Colour Temp: Warm White 2900 - 3500KVoltage: 12v DCConsumption - Watts: 12Fitting config: AR 111 to G53 Base

RQ-AR111-9*1-12-WW

Led Count: 9Lumens: 380Colour Temp: Warm White 2900 - 3500KVoltage: 12v DCConsumption - Watts: 9.0Fitting config: AR 111 to G53 Base

AR-111 6 x 2Watt LED Spotlight

AR-111 9 x 1Watt LED Spotlight

23

Fluorescent Replacement TubesFluorescent LED replacement tube for standard 15Ø

300mm and 515mm T5 light fittings. The LEDs are

located in a single row down the length of the tube.

Similar light output to a standard 15 Watt tube. These

high quality SMD LED replacement bulbs save power.

Energy efficient, they last up to 50 times longer than a

standard bulb. The latest SMD chip technology is used

that provides the highest light output to consumption

ratio available today.

The ballast/starter must be disconnected before

installing the LED fluoro tube in the existing fluoro

fitting. The bulb can not run through a starter. This is

quite an easy modification, simply take all electronics

except the switch out of the circuit (or bypass it), so

that the power runs directly through switch direct to

tube holder. Visit for more

information on how to install.

IMPORTANT INSTALLATION NOTE


YM-T5-3-C-12(300mm Length)

LED Count: 42Lumens: 400Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DC Consumption - Watts: 3.0Fitting config: T5

YM-T5-3-W-12(300mm Length)

LED Count: 42Lumens: 400Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DCConsumption - Watts: 3.0Fitting config: T5

RQ-T5-515MM-CW(515mm Length)

LED Count: 72Lumens: 360Colour Temp: Cool White 5000 - 6300KVoltage: 12v DC Consumption - Watts: 5.0Fitting config: T5

RQ-T5-515MM-WW(515mm Length)

LED Count: 72Lumens: 360Colour Temp: Warm White 2900 - 3500KVoltage: 12v DCConsumption - Watts: 5.0Fitting config: T5


FD-6W-D-CW

LED Count: 84Lumens: 400Colour Temp: Cool White 5000 - 6300KVoltage: 10 - 30v DC Consumption - Watts: 6Fitting config: 2D Fluro

FD-6W-D-WW

LED Count: 84Lumens: 380Colour Temp: Warm White 2900 - 3500KVoltage: 10 - 30v DC Consumption - Watts: 6.0Fitting config: 2D Fluro 13cm

D Shape Fluoro Replacement

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

IMPORTANT INSTALLATION NOTE

The ballast/starter must be disconnected before installing the LED fluoro

tube in the existing fluoro fitting. The bulb can not run through a starter.

This is quite an easy modification, simply take all electronics except the

switch out of the circuit (or bypass it), so that the power runs directly

through switch direct to tube holder. For a video tutorial on how to

install this light, visit www.ledsunlimited.co.nz

24

500 mm Cool WhiteFD-LBP5WP30T-PW-CW-S

FD-LBP5WP30T-PW-CW-R

LED Count: 30Lumens: 170Colour Temp: Cool White 5000 - 6300KVoltage: 9 - 30v DCConsumption - Watts: 2.4Fitting config: Cable Length 490mm. Cable Mount (R) Rear (S) End

500 mm Warm WhiteFD-LBP5WP30T-PW-WW-S

FD-LBP5WP30T-PW-WW-R

LED Count: 30Lumens: 150Colour Temp: Warm White 2900 3500KVoltage: 9 - 30v DCConsumption - Watts: 2.4Fitting config: Cable Length 490mm. Cable Mount (R) Rear (S) End

1000 mm Cool WhiteFD-LBP5WP60T-PW-CW-S

FD-LBP5WP60T-PW-CW-R

LED Count: 60 Lumens: 450Colour Temp: Cool White 5000 6300KVoltage: 9 - 30v DCConsumption - Watts: 4.8Fitting config: Cable Length 490mm. Cable Mount (R) Rear (S) End

1000 mm Warm WhiteFD-LBP5WP60T-PW-WW-S

FD-LBP5WP60T-PW-WW-R

LED Count: 60 Lumens: 405Colour Temp: Warm White 2900 - 3500KVoltage: 9 - 30v DCConsumption - Watts: 4.8Fitting config: Cable Length 490mm. Cable Mount (R) Rear (S) End

These LED Light Bars have been manufactured to meet IP68 standards, and may be immersed in water. They are suitable for boating, vehicle, motorhome, swimming pool, garden and camping use.

The main material is PVC

These high quality IP68 rated LED Light Bars save power. Energy efficient, they last up to 50 times longer than a standard bulb. Luminaires Class II with a rated rendering index of 83.3 the P5 chips and electronics allow these light bars to be used on 12 or 24vdc.

The P5 LEDs are located in a single row down the length of the light bar. The two cable options are available being end or rear. Installation is easy using clips included, velcro or 3M double sided tape.


Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

RED (RD)

GREEN (GN)

(End Cable Mount)

Waterproof Light Bars

25


Cabinet Light BarsThese LED light bar's have an elegant design, inter-connectable and easy to install. PMMA lens across 42 or 72 leds using the latest SMD3528 chips makes this unit a fantastic light source for so many applications. Easily join these units together just by sliding into the in-built connector socket on the end.

Includes: Connector, Mounting brackets and screws, DC Plugs for easy power connection

This particular model LED light bar has an integrated IR sensor and allows for different modes of use.

Mode A: On/Off switch mode - Put finger near the sensor( 5cm range), light will change its on/off status. Sensor will just act as an on/off switch. Mode B: IR Sensor mode. Light defaults as on status. If there is a stopped object near the sensor (less than 5cm), the light bar will turn off. An example of this would be in a cabinet, when the door is closed the sensor is covered (less than 5cm) when the door is opened the sensor is not covered and the light comes on. No switches necessary in this mode.

SW-FTB-3528X42-CW(cool white)

SW-FTB-3528X42-WW(warm white)

LED Count: 42Colour Temp: Cool White 6000KColour Temp: Warm White 3000KLumens: Cool White: 400lmLumens: Warm White: 330lmVoltage: 12v DCConsumption - Watts: 3Fitting config: Surface MountDimensions: 300 x 25 x 9mm

SW-FTB-3528X42-CW(cool white)

SW-FTB-3528X42-WW(warm white)

----SW-FTA-3528X72-CW(cool white with sensor)SW-FTA-3528X72-WW

(warm white with sensor)

LED Count: 72Colour Temp: Cool White 6000KColour Temp: Warm White 3000KLumens: Cool White: 450lmLumens: Warm White: 380lmVoltage: 12v DCConsumption - Watts: 5Fitting config: Surface MountDimensions: 500 x 25 x 9mm

Extendable Light Bar (300mm)

Extendable Light Bar (500mm)

WARM WHITE (WW)

Colours Available

COOL WHITE (CW)

Cabinet light bar with IR Sensor - Cool White (500mm)

26

Flood Lights


LED Count: 2 Lumens: 16800Colour Temp: Cool White 5000 6300KVoltage: 85 - 265v ACLED Voltage: 30 - 36v DCConsumption - Watts: 200IP Rating: 65Power Factor: >0.96Power Efficiency: >86%

LED Count: 4Lumens: 33600Colour Temp: Cool White 5000 6300KVoltage: 85 - 265v ACLED Voltage: 30 - 36v DCConsumption - Watts: 430IP Rating: 65Power Factor: >0.96Power Efficiency: >86%

LED Count: 2 Lumens: 12600Colour Temp: Cool White 5000 6300KVoltage: 85 - 265v ACLED Voltage: 30 - 36v DCConsumption - Watts: 155IP Rating: 65Power Factor: >0.96Power Efficiency: >86%

BL-UTL200WA4

BL-UTL400WA4

TLD-TG450-140

400 Watt LED flood light



27


Flood Lights continued..

TLD-TG115-10

LED Count: 1Lumens: 900 lmColour Temp: Cool White 5500KVoltage: 85 - 265v ACConsumption - Watts: 10Lumen p/watt: 90 lm/wIP Rating: 65Luminous Efficiency: 80-100Lm/WTotal Efficiency: > 85%CRI: RA >80Working Lifespan: 50,000 HoursCertifications: CE, SAA

TLD-TG404-100

LED Count: 1Lumens: 8900 lmColour Temp: Cool White 6500 - 7000KVoltage: 85 - 265v ACConsumption - Watts: 100Fitting config: CableIP Rating: 65LED Working Voltage: 30 - 36v DCLuminous Efficiency: 80-100Lm/WTotal Efficiency: > 85%CRI: RA >80Working Lifespan: 50,000 HoursCertifications: CE, SAA

TLD-TG225-30

LED Count: 1Lumens: 2700 lmColour Temp: Cool White 5500KVoltage: 85 - 265v ACConsumption - Watts: 30Lumen p/watt: 90 lm/wIP Rating: 65LED Working Voltage: 30 - 36v DCLuminous Efficiency: 80-100Lm/WTotal Efficiency: > 85%CRI: RA >80Working Lifespan: 50,000 HoursCertifications: CE, SAA

TLD-TG310-60

LED Count: 1Lumens: 5400 lmColour Temp: Cool White 5500KVoltage: 85 - 265v ACConsumption - Watts: 60Lumen p/watt: 90 lm/wIP Rating: 65LED Working Voltage: 30 - 36v DCLuminous Efficiency: 80-100Lm/WTotal Efficiency: > 85%CRI: RA >80Working Lifespan: 50,000 HoursCertifications: CE, SAA

Available in alternate style on request

100 Watt

60 Watt

10 Watt

30 Watt

28

High Bay

The revolutionary new High Power LED High Bay. Using

this single powerful 150 watt LED as the light source,

provides performance that exceeds other equivalent LED

High Bays available. Used to replace standard high bay

lighting.

LED Count: 1Lumens: 15800 (cool)Colour Temp: Cool White 6000 - 7000KVoltage: 85 - 265v ACLED Voltage: 30 - 36v DCConsumption - Watts: 150IP Rating: 65Power Factor: >0.98Power Efficiency: >85%





BL-UIL150

150 watt LED High Bay

BL-UIL150 (150 Watt)

BL-UIL50 (50 Watt)

BL-UIL100 (100 Watt)

BL-UIL30 (30 Watt)

BL-UIL80 (80 Watt)

29

Linear R7SLED Linear R7S lamps replace power-hungry fragile R7S Halogen lamps. Turn old halogen floodlights, into modern efficient LED floodlights.

R7S LED lamps have bright SMD LEDs, which provide reliable and durable in service in floodlights, floor lamps, outdoor lighting.

LED R7S lamps have significant advantages over regular halogen bulbs. LED R7S are robust, run at a safe temperature (that won't burn you), immune to cycling damage (switching on and off), significantly lower power consumption, and tolerant across a wide voltage range.

RQ-R7S-8W-118-CW

LED Count: 36Lumen: 1350lmColour Temp: Cool White 6000KVoltage: 100 - 240v ACConsumption - Watts: 15Fitting config: Linear R7S (J118)Dimensions: 118 x 55mm

RQ-R7S-8W-118-CW

LED Count: 72Lumen: 1350lmColour Temp: Cool White 6000KVoltage: 100 - 240v ACConsumption - Watts: 15Fitting config: Linear R7S (J189)Dimensions: 189 x 55mm

Linear R7S - 15 Watt (118mm)

Linear R7S - 15 Watt (189mm)


Complete fittings available on request.

30

WD-2N4

The Oledone LED Light Bars use high quality CREE LED chips. IP 67 rated and robust aluminum alloy housing makes

these LED light bars suitable for a wide range of applications e.g. SUV, ATV, UTV, 4x4 offroad, truck, road

construction machinery, mining, drilling, agriculture, forestry, marine etc. Available in lengths from 4 to 64 LED

(multiples of 4)

WD-6N4

Oledone LED Light Bar CREE


Part Number Lumens Watts Length

WD-1N4 1,080 12 100 mm

WD-2N4 2160 24 152 mm

WD-3N4 3240 36 213 mm

WD-4N4 4320 48 274 mm

WD-5N4 5400 60 333 mm

WD-6N4 6480 72 394 mm

WD-7N4 7560 84 452 mm

WD-8N4 8640 96 510 mm

WD-9N4 9720 108 567 mm

WD-10N4 10,800 120 627 mm

WD-12N4 12,960 144 752 mm

WD-16N4 17,280 192 990 mm

WD-21N4 23,520 240 1262 mm

WD-1N4

9-32v DC9-32v DC

31

Driving Lights

JM-901SS

LED Count: 6Colour Temp: Cool White 5000 - 6300KVoltage: 12 or 24v DCConsumption - Watts: 8.4Fitting config: Mounting BracketDimensions: 153 x 37 x 43mm + bracket304 stainless steel bracket

SM-4X3DECK-WH

LED Count: 4 x 3 wattColour Temp: Cool White 6000KVoltage: 9 - 33v DCConsumption - Watts: 12 wattsFitting config: Mounting BracketBracket: 304 or 316 stainless availableDimensions: 85mm diameter x 100mm HeightLumens: 960 LmColour: WhiteRated IP 67

Driving Light - 6 x 1 Watt

Work / Deck Light - 4 x 3 Watt


Deck and Work Lights

This high power 5 LED Work light is ultra bright and very rugged. IP68 rated Aluminum housing using high performance LEDs to ensure superior illumination, this is a durable and reliable LED work light.

Applications: Construction, farming & agriculture, forestry, military & emergency services, mining, utility vehicles, recreational, marine, and much more.

Quality 6 LED driving light fitting. Compact and well constructed from aluminum alloy with polycarbonate/acrylic lens and 304 stainless steel bracket.

Depending on how the light is wired two levels of brightness can be achieved; 100% and 70%.

4 LED Super bright Work / Deck light. Long lifespan, Energy efficient.

UV and impact resistant lens, die-cast aluminium housing, 304 stainless and 316 stainless brackets available.

WD-5L18-W (white)WD-5L18-B(black)WD-5L18-S(silver)

LED Count: 5Lumens: 1650Colour Temp: Cool White 5000 - 6300KVoltage: 9 - 32v DC Consumption - Watts: 18Fitting config: Bracket

32

Security Lighting

The Smart Light 1000 is a versatile flush mount 12 volt DC Dual

Sensor light. The Smart light provides peace of mind as a

security light, and also a convenient automatically activated

entryway light. A Revolution 12 LED bulb (REVM30) is included

as standard with the Smart Light 1000.

Features of the Smart Light include two motion sensors,

battery low indication (11.5v DC) and daylight automatic shut

off of sensor function. Three colour LEDs indicate day mode,

night mode, and low battery warning. When sensor mode is

active the light will switch on automatically any time motion is

detected within the sensor range.

Sensitivity is calibrated to exclude small animals (adjustable)

from activating the light. By toggling the switch the Smart

Light can also be switched on as a regular light. The Smart

Light is designed for outdoor use to withstand strong rain and

washing etc, all the electronics sealed by the lens which has a

clear silicone O ring.

Smart Light 1000 (Dual Sensor)


SL-1000

Colour Temp: Cool White 6000KVoltage: 12v DCConsumption - Watts: 2.8 wattsFitting config: Flush mountLumens: 200 LmColour: WhiteRated IP 67Sensors : x 2

33

FEEL SAFE - FEEL SECURE

Aluminium profile and diffuser

7mm

7mm recessed aluminum profile

with flange designed for use with

LED strip-light. Comes with

PMMA plastic opal matte diffuser.












LL-ALP001

LL-ALP002

LL-ALP003

LL-ALP004

12.4

12.4

7.3mm

12.4 15mm

12.4

15mm

16 alternate profiles to choose from.

Available in continuous lengths up to 2 meters with end caps.


Flexible Strip Light Waterproof

LED Strip Lighting is a great lighting solution suitable for a huge range of applications. Strip Light can be fitted to

flat, curved and complex surfaces and is available for purchase in cut lengths metre lengths from 1 to 5 metres.

The Strip Light may be cut into sections as small as 3 LEDs, making it ideal for many applications from decoration

to general lighting. 3M self adhesive backing is available which allows for easy installation on any flat surface.

Simply peel away the self adhesive backing and stick.

Installation clips and screws are available for those surfaces that are not suitable for the adhesive backing.

The Strip Light is waterproof (IP68* rated) and suitable for outdoor use. The LEDs are encased in a silicon filled

silicon tube. Rated at IP68 it may be immersed up to 2m deep in water providing the ends are completely sealed.

Where the strip light is cut, it needs to be resealed with silicon and the special end sealing caps that are available.

NOTE: Warranty will be void if the ends are not completely waterproof sealed prior to installation and the strip-

light is exposed to outdoors/wet environment.

The strip light has a beam angle 120° and is available in a number of configurations as 30, 60 and 120 LEDs per

metre depending on the LED type, SMD3528 or SMD5050. For particular specifications view the individual

product, the specifications are quoted per meter.

* See IP Code Chart at the back of the catalogue for more details.

Colours available include White, Warm White, Yellow, Red, Blue, Green and RGB (Red, Green and Blue). RGB

controllers and remotes are available.

COMING SOON: ADDRESSABLE RGB STRIP-LIGHT, LED'S CONTROLLED INDIVIDUALLY FOR SPECTACULAR EFFECTS!

30LED p/m Pure WhiteRQ-SMD3528-30-W3-W-M30LED p/m Warm White

RQ-SMD3528-30-W3-WW-M

LED Count: 30 p/meterLumens: 120 Colour Temp: 5000 - 6300K (pure white)Colour Temp: 2900 - 3500K (warm white) Voltage: 12v DCConsumption - Watts: 2.4 p/meterFitting config: Strip LightSize: 10mm(w) 5mm (h)



LED Count: 60 p/meterLumens: 240 Colour Temp: 5000 - 6300K (pure white)Colour Temp: 2900 - 3500K (warm white)Voltage: 12v DCConsumption - Watts: 4.8 p/meterFitting config: Strip LightSize: 10mm(w) 5mm (h)



LED Count: 120 p/meterLumens: 480 Colour Temp: 5000 - 6300K (cool white)Colour Temp: 2900 - 3500K (warm white)Voltage: 12v DCConsumption - Watts: 9.6 p/meterFitting config: Strip LightSize: 10mm(w) 5mm (h)

StripLight SMD 3528StripLight SMD 3528 30LED , 60LED and 120LED per meter


Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

35

30LED p/m Pure White

RQ-SMD5050-30-W3-W-M

30LED p/m Warm White


LED Count: 30 p/meter

Lumens: 330 (white)

Colour Temp: 5000 - 6300K (pure white)

Colour Temp: 2900 - 3500K (warm white)

Voltage: 12v DC

Consumption - Watts: 7.2 p/meter

Fitting config: Strip Light

Size: 12mm(w) 5mm(h)

Flexible Strip Light 5050 SMD

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

YELLOW (YL)

RED (RD)

BLUE (BL)

GREEN (GN)

60LED p/m Cool White

RQ-SMD5050-60-W3-W-M

60LED p/m Warm White


60LED p/m Red

RQ-SMD5050-60-W3-RD-M

60LED p/m Blue

RQ-SMD5050-60-W3-BL-M

60LED p/m Green

RQ-SMD5050-60-W3-GN-M

60LED p/m Yellow

RQ-SMD5050-60-W3-YL-M

60LED p/m RGB

RQ-SMD5050-60-W3-RGB-M

LED Count: 60 p/meter

Voltage: 12v DC

Consumption - Watts: 14.4 p/meter

Fitting config: Strip Light

Size: 12mm(w) 5mm(h)

Lumens: 660 (Pure White)

Lumens: 525 (Warm White)

Lumens: 135 (Red)

Lumens: 375 (Green)

Lumens: 165 (Blue)

Lumens: 195 (Yellow)

Lumens: 660 (RGB)


+12v

led 1

led 1led 2led 3

led 2

led 3

led 1led 2

led 3

Three levels of brightness can be

achieved with the SMD5050 flexible

strip light.

By simply connecting the individual

voltage rails you can illuminate either

1,2 or 3 of the integrated led chips

within the 5050 chip.

Three levels of brightness!!

36

Flexible Strip Light 5050 SMD - RGB

RGB (Red, Blue and Green) LED strips use high brightness 5050 SMD LED. Depending on how the wires are

connected, colours can be static red, blue, purple, green, yellow or white. An RF remote controller can be

connected inline with the strip light so a wide range of colours can be produced via a remote control, including

various modes to phase different lighting effects. Some applications are:

?Path and contour marking

?Elegant interior decoration

?Backlighting for billboards and signage

?Landscape outlines

?Signal lighting

?Swimming pool lighting

?Car and motorcycle decorative lighting

?Architectural decorative lighting

?Archway lighting

?Canopy lighting

?Bridge edge lighting

COMING SOON: ADDRESSABLE RGB STRIP-LIGHT, LED'S

CONTROLLED INDIVIDUALLY FOR MORE SPECTACULAR EFFECTS! RQ-SMD5050-60-W3-RGB-M

RQ-6A44KEY

Technical Specifications

W x H x L - 35mm x 22mm x 63mm

Working temperature -20 to 60ºC

Supply Voltage 12vDC

Output 3 Channels

External Dimensions 63mm x 35mm x 22mm.

Net weight 63g

Static Power Consumption <1W

Output current <2A per Channel.

Output Power <72W

RQ-12A44KEY

Technical Specifications

Working temperature -20 to 60ºC

Supply Voltage 12vDC

Output 3 Channels

External Dimensions 130mm x 64mm x 21mm.

Net weight 166g

Static Power Consumption <1W

Output current <4A per Channel.

Output Power <144W

Using the 44 key infrared controller provides for a great range of choices that include changing the static colour,

dynamic changes to lighting effects and brightness by using the infrared remote. Personal choices may be random

colour changes, jumping changes, gradual changes, white strobe flashing and many other effects.

The 44 key infrared

controllers use an

advanced micro control

unit to control the

functions of RGB strip

light.

RGB Controllers and Accessories

When a continuous length of strip lighting exceeds the max output of the controller (12 amps), Leds Unlimited

have an 12 amp RGB amplifier that works directly with the controller. Part Number:: RQ-RGB-AMP-12v-12A

Need an amplifier?

37

RQ-6A-MM The 4 pin male to male joiner plug for use with cabling of

the 6Amp RGB Controller.

RQ-6A-ML The 4 pin male plug with lead for use with cabling of the

6Amp RGB Controller.

RQ-6A-MS The 4 pin male plug to socket for use with cabling of the

6Amp RGB Controller.

RQ-6A-SS The 4 pin socket to socket for use with cabling of the 6Amp

RGB Controller.

Male to Male Joiner (use with 6Amp RGB Controller)

Male Plug and Lead (use with 6Amp RGB Controller)

Male Plug to Socket (use with 6Amp RGB Controller)

Socket to Socket (use with 6Amp RGB Controller)

StripLight Accessories

RQ-End Caps-10Silicone sealing caps, use to re-seal strip light after

cutting. Opaque Colour

RQ-Clips-10

Strip Mounting Clips and Screws, for use where the

3M backing tape is not suitable e.g. tight curve

where 3M tape may ‘slide’. Opaque Colour.

RQ-Silicone-45gSingle component non-toxic, solvent free. Room

temp curing, 12 - 24 hours depending on thickness.

Transparent.

Silicone End Caps

Strip Mounting Clips and Screws

Silicone Sealant Tube 45gram


LED Modules and Converters

RQ-DC-18~48v12v-5A

?Input voltage range: 18V ~ 48V

?Output voltage: 12v DC

?Input voltage frequency 47-63Hz.

?Output ripple & noise 100mVp-p.

?Efficiency of 75-80%.

?Output short circuit protection.

?Overheat protection.

?Operating temperature 0 ? > +50 ? .

?Storage temperature -20 ? > +85 ? .

?Humidity 10% -95% RH.

?Output current: 5A

DC Power Converter 18 - 48vDC to 12v DC

LED Modules - Waterproof

Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

AMBER (AM)

RED (RD)

BLUE (BL)

GREEN (GN)

1 Watt Cool White

RQ-1WSTAR-CW

--

1 Watt Warm White

RQ-1WSTAR-WW

--

1 Watt Red

RQ-1WSTAR-RD

--

1 Watt Green

RQ-1WSTAR-GN

--

1 Watt Blue

RQ-1WSTAR-BL

--

1 Watt Amber

RQ-1WSTAR-AM

--

3 Watt Cool White

RQ-3WSTAR-CW

--

3 Watt Warm White

RQ-3WSTAR-WW

LED Count: 1

Voltage: 3.6 - 3.8v DC

Consumption - Watts: 1 Watt

Consumption - Watts: 3 Watt

Lumen Output 1 Watt Module - 100 (cool) 90 (warm)

Lumen Output 3 Watt Module - 200 (cool) 180 (warm)

These quality Epistar LED modules are super bright.

Their uses are as many as your imagination. Use for

general lighting, projects and lighting applications. With

an average service life of over 100,000 hours, they will

virtually never need replacing.


JS-LM302W1-L (cool white)JS-LM302NW1-L (warm white)

Lumens: 100 (cool white) - 80 (warm)Colour Temp: Cool 6000K warm 3500KVoltage: 12v DCConsumption - Watts: 3.3Fitting config: SurfaceBeam angle: 120 degreesWaterproof Grade: Ip66Forward Current: 20-30mA

3.3 Watt Waterproof LED Module

30mm Diameter Colours Available

COOL WHITE (CW)

WARM WHITE (WW)

39

LED Modules

JS-MD5050W1-S (cool white)JS-MD5050NW1-S(warm white)

Lumens: 15 (cool white) - 12 (warm)Colour Temp: Cool 6000K warm 3500KVoltage: 12v DCConsumption - Watts: 0.23Fitting config: SurfaceBeam angle: 120 degreesWaterproof Grade: IP 65Forward Current: 20-30mA

JS-MD5050W2-S(cool white)JS-MD5050NW2-S(warm white)


JS-MD5050W2-SS(cool white)JS-MD5050NW2-SS(warm white)


JS-MD5050W3-S(cool white)

JS-MD5050NW3-S(warm white)

JS-MD5050R3-S(red)

JS-MD5050G3-S(green)

JS-MD5050B3-S(blue)

JS-MD5050Y3-S(yellow)

JS-MD5050RGB3-S(RGB)


RGB can be used with one of Leds Unlimited RGB Controllers.

JS-MD5050W4-S(cool white)

JS-MD5050NW4-S(warm white)

JS-MD5050R4-S(red)

JS-MD5050G4-S(green)

JS-MD5050B4-S(blue)

JS-MD5050Y4-S(yellow)

JS-MD5050RGB4-S(RGB)


RGB can be used with one of Leds Unlimited RGB Controllers.

Single LED waterproof module

Double LED waterproof module

Double LED waterproof module

TRI LED waterproof module

Quad LED waterproof module

23 x 14mm

39 x 12mm

45 x 12mm

75 x 12mm

Colours Available

Colours Available

Colours Available

Colours Available

Colours Available

COOL WHITE (CW)

COOL WHITE (CW)

COOL WHITE (CW)

COOL WHITE (CW)

COOL WHITE (CW)

WARM WHITE (WW)

WARM WHITE (WW)

WARM WHITE (WW)

WARM WHITE (WW)

WARM WHITE (WW)

YELLOW (YL)

YELLOW (YL)

RED (RD)

RED (RD)

BLUE (BL)

BLUE (BL)

GREEN (GN)

GREEN (GN)

35 x 35mm


Under Water Lighting

RQ-9X3W-W(white)RQ-9X3W-B(blue)

LED Count: 9Lumens: 1050 (white)Colour Temp: Cool White 6000KVoltage: 10 - 13.5v DCConsumption - Watts: 27Fitting config: Surface MountIP Rating: 68Material: 316 Stainless

RQ-3X3W-W(white)RQ-3X3W-B(blue)

LED Count: 3Voltage: 10 - 13.5v DCConsumption - Watts: 9Fitting config: Surface MountIP Rating: 68Material: 316 Stainless

Colours Available

Colours Available

COOL WHITE (CW)

COOL WHITE (CW)

BLUE (B)

BLUE (B)

MarineQuality stainless steel 316 led underwater marine lights. IP68 rated for underwater use

and comes in a range of colors

RQ-6X3W-W(white)RQ-6X3-B(blue)


RQ-12X3W-W(white)RQ-12X3-B(blue)


Colours Available

Colours Available

COOL WHITE (CW)

COOL WHITE (CW)

BLUE (B)

BLUE (B)

316 Stainless - IP 68


LED Panel Lighting 240v AC

For 600x600mm and 1200 x 300mm LED panel lightIR remote control dimmable version available.

DELAYOFF

_+

50%25%

75% 100%


LED lighting panels use advanced back-light technology. Professional design, zero glares, soft and uniform

brightness. High efficient energy saving, easy installation and low maintenance. Ideal for commercial lighting and

many other applications. The LED lighting panel is designed for efficient illumination with many advantages over

traditional fluorescent technology.

45 Watt Panel LightHD-PW-W576CW-A00-606

LED Count: 576Lumens: 3500 Colour Temp: 6000K (Cool White)Voltage: 90 - 264v ACConsumption - Watts: 45Fitting config: Ceiling PanelSize (mm): 600 x 600 x 50

75 Watt Panel LightHD-PW-W900CW-A00-606

LED Count: 900Lumens: 6000Colour Temp: 6000K (Cool White)Voltage: 90 - 264v ACConsumption - Watts: 70Fitting config: Ceiling PanelSize (mm): 600 x 600 x 50

80 Watt Panel LightHD-PW-X1000C-A00-1206

LED Count: 1000Lumens: 6875Colour Temp: 6000K (Cool White)Voltage: 90 - 264v ACConsumption - Watts: 80Fitting config: Ceiling PanelSize (mm): 1200 x 600 x 50

42

IR remote control dimmer for dimmable LED Lighting panels

DELAYOFF

_

+

50%

25%

75%

IR remote control options:

ON/OFFbutton.PresstoturnONorOFF

DELAY OFF button. Press to delay a setup or turn off timeThe standard programmed delay time is 2 minutes

Increased brightness button. Press to increase the lightbrightness up to 50 levels

Decreased brightness button. Press to reduce lightbrightness

25% button. Press to choose the 25% of the light’s fullbrightness

50% button. Press to choose the 50% of the light’s fullbrightness

75% button. Press to choose the 75% of the light’sbrightness

100% button. Press to choose the 100% of the light’sbrightness

Currently dormant but created for a future planned function

100%

LED Panel Lighting continued ..


80 Watt

296 x 1196mm

A remote control is available providing dimming functions for LED light panels allowing the user to adjust the

brightness, you can smoothly dim the light or press the “HOT-KEY” to choose a brightness pre-set quickly. It

also has a “DELAY OFF” mode, where the light will automatically turn off after set delay period.

43

LED Tube Lighting 240v AC

44

WARM WHITE (WW)

Colours Available

COOL WHITE (CW)

?Low Power Consumption

?Long Life Span

?Excellent Illumination

?Environmenty Friendly

?Energy Saving

?Low Heat Emitting

?Durable

?Easy Installation

?Rotatable

?Complies with NZ safety

?SAA approved

604

30

908.8

30

1213.6

1514.2

30

30

ST402-96A Tube T8 7W 96LED 240vAC 530lm 120° 600mm

ST402-144A Tube T8 10W 144LED 240vAC 800lm 120° 600mm

ST402-144B Tube T8 10W 144LED 240vAC 800lm 120° 900mm

ST402-216B Tube T8 15W 216LED 240vAC 1200lm 120° 900mm

ST402-216C Tube T8 15W 216LED 240vAC 1200lm 120° 1200mm

ST402-288C Tube T8 20W 288LED 240vAC 1600lm 120° 1200mm

ST402-288D Tube T8 20W 288LED 240vAC 1600lm 120° 1500mm

ST402-384D Tube T8 26W 384LED 240vAC 2100lm 120° 1500mm

Stop / Tail light (red) Dual Brightness - 5/21 watt equivalent


Automotive

RQ-AUBAY15D-1156C24R-H(12v DC)RQ-AUBAY15D-1156C24R-H-24(24v DC)

LED Count: 24Colour Temp: REDVoltage: 12 or 24v DCConsumption - Watts: 3.2Fitting config: BAY15D Automotive (Stop/Tail)

RQ-AUBA15S-1156C24R-H(12v DC)RQ-AUBA15S-1156C24R-H-24(24v DC)

LED Count: 24Colour Temp: REDVoltage: 12 or 24v DCConsumption - Watts: 3.2Fitting config: BA15S Automotive (Stop)

RQ-AUBA15S-1156A6R-H(12v DC)RQ-AUBA15S-1156A6R-H-24(24v DC)

LED Count: 6Colour Temp: REDVoltage: 12 or 24v DCConsumption - Watts: 0.8Fitting config: BA15S Automotive (tail)Size: 27mm x 18.6mm overall

RQ-AUBA15S-1156C24A-H(12v DC)RQ-AUBA15S-1156C24A-H-24(24v DC)


RQ-AUBA15S-1156C24W-H(12v DC)RQ-AUBA15S-1156C24W-H-24(24v DC)

LED Count: 24Colour Temp: WhiteVoltage: 12 or 24v DCConsumption - Watts: 3.2Fitting config: BA15S Automotive (Signal)

Stop light (red) - 21 watt equivalent

Tail light (red) - 5 watt equivalent

Signal light (amber) - 21 watt equivalent

Signal light (white) - 21 watt equivalent

LED bulbs enhance the looks and safety of your car, motorcycle, motorhome etc. Immediate on/off

time, Vibration resistant, when red in colour the light improves the tail light lens colour when illuminated.

response

45

Automotive


RQ-AUBA15S-1156C24R-H(12v DC)RQ-AUBA15S-1156C24R-H-24(24v DC)


Signal light (amber) - 21 watt equivalent

RQ-AUBA15S-1156C24A-H(12v DC)RQ-AUBA15S-1156C24A-H-24(24v DC)


RQ-AU211A12A-H

LED Count: 12Colour Temp: AmberVoltage: 12v DCConsumption - Watts: 2.5Fitting config: Festoon - 44mm

RQ-AU211A8R-H-1210

LED Count: 8Colour Temp: RedVoltage: 12v DCConsumption - Watts: 0.8Fitting config: Festoon - 39mm

RQ-AU211A12R-H

LED Count: 12Colour Temp: AmberVoltage: 12v DCConsumption - Watts: 2.5Fitting config: Festoon - 44mm

RQ-AU211A8W-H-1210

LED Count: 8Colour Temp: WhiteVoltage: 12v DCConsumption - Watts: 0.8Fitting config: Festoon - 39mm

Signal light (amber) - 21 watt equivalent (BAU 15S Type)

44mm Signal light (amber) - 21 watt equivalent

39mm Tail light (red) - 5 watt equivalent

44mm Stop light (red) - 21 watt equivalent

39mm Tail light (white) - 5 watt equivalent

continued..

Automotive Festoon

46

Flasher Cans


LED flasher cans are a requirement for LED signal lamps, traditional flasher unit will not detect the load of a led lamp and cause the lamps to flash faster or in some cases not at all. 9 - 14.8v DC

RQ-AUFLASH-EP12

RQ-AUFLASH-EP34

RQ-AUFLASH-EP13

RQ-AUFLASH-FET13

Chevrolet Chrysler BMW Honda MG Mitzi

Nissan Rover Subaru Triumph

DaihatsuHyundaiHondaMitziNissan

AlphaPorscheDaewooProtonBMWNissanFiatRoverHondaJaguar

SAABSubaruLadaSuzukiLeylandToyotaMazdaTriumphVolvoPeugeot

AlphaLexusAudMercBMWNissanChryslerPeugeotCitroenPorscheDaewoo

ProtonDaimlerRoverFiatSeatFordToyotaJaguarVWLadaVolvo

List of possible makes (check existing before replacement)

47

Effect Lighting


RGB LED Wall Washer Matrix flood light.

The RGB Wall washer produces spectacular color effects, using 36 x 1W LEDs with a 45 degree beam angle. Each

colour can be controlled allowing up to 16 million variations.

Compatible with standard DMX512. Can be controlled with custom waterproof wireless RF controller and standard

4 wire type RGB LED controller.

These can be daisy chained to enable effect lighting to be controlled via one remote. amplifiers are required

depending on how many are linked together.

Application examples

Bars, restaurants, clubs, hotels, stages, building illumination,

Museums, galleries, Sculptures and arts

Specifications

Housing: Aluminum with tempered glass

IP Rating: IP65

Power: 45 Watts

Beam angle: 45

Unit Weight: 3.2kg/unit

BL-FEWW36-RGB

LED Count: 36Colour Temp: RGBLumens: 700Voltage: 20 - 30v DCConsumption - Watts: 45Fitting config: BracketIP Rating: IP65

Matrix Wall Washer - Edison

Also available in Red, Blue, Green and Yellow

48

RGB LED Wall Washer Linear flood light.

The RGB Wall washer produces spectacular color effects, using 18 x 1W LEDs with a 45 degree beam angle. Each

colour can be controlled allowing up to 16 million variations.

Compatible with standard DMX512. Can be controlled with custom waterproof wireless RF controller and standard

4 wire type RGB LED controller.

These can be daisy chained to enable effect lighting to be controlled via one remote. amplifiers are required

depending on how many are linked together.

Application examples

Bars, restaurants, clubs, hotels, stages Building illumination Museums, Galleries Sculptures and Arts

Specifications

Housing: Aluminum with tempered glass

IP Rating: IP65

Power: 18 Watts

Beam angle: 45

Unit Weight: 3.2kg/unit

Length: 500mm

Effect Lighting


BL-HWW18-RGB

LED Count: 18Colour Temp: RGBLumens: 700Voltage: 20 - 30v DCConsumption - Watts: 18Fitting config: Bracket

BL-HWW18-R

LED Count: 18Colour Temp: RedVoltage: 20 - 30v DCConsumption - Watts: 18Fitting config: Bracket

BL-HWW18-G

LED Count: 18Colour Temp: GreenVoltage: 20 - 30v DCConsumption - Watts: 18Fitting config: Bracket

BL-HWW18-Y

LED Count: 18Colour Temp: YellowVoltage: 20 - 30v DCConsumption - Watts: 18Fitting config: Bracket

Linear Wall Washer - RGB

Linear Wall Washer - Red

Linear Wall Washer - Green

Linear Wall Washer - Yellow

continued..

BL-HWW18-B

LED Count: 18Colour Temp: BlueVoltage: 20 - 30v DCConsumption - Watts: 18Fitting config: Bracket

Linear Wall Washer - Blue

49

This DMX controller is used for controlling a variety of DMX compatible LED lamps. For example, point source

light, flexible strip light, wall washers, glass curtain wall lights and so on. It has many advantages such as easy

connection and simplicity of use. According to the actual needs of the user, it can perform effects like jumpy

colour shifts, gradual colour shifts, stroboflash and other effects.

Specification:

Working temperature: -20-60?

Supply voltage: 12V / 24V optional

Output: 3 channels

Connection mode: common anode

External dimension: L184 x W123 x H45 mm

Packing size: L231 x W182 x H56 mm

Net weight: 755g

Output : 4A each channel

Gross weight: 820g

Static power consumption: <1W

Output current: <4A(each channel)

Output power: 5V:<60W, 12V:<144W, 24V:<288W

Effect Lighting


DMX Controller - Part # BL-WC8

controllers

50

This RGB controller is used for controlling a variety of compatible LED lamps. For example, point source light,

flexible strip light, wall washers, glass curtain wall lights and so on. It has many advantages such as easy

connection and simplicity of use. According to the needs of the user, it can perform effects like jumpy colour

shifts, gradual colour shifts, stroboflash and other effects.

Specification:

Working temperature: -20-60?

Supply voltage: 12V / 24V optional

Output: 2 channels

Control distance: 20m (freq. 433 Mhz)

External dimension: L103 x W64 x H24 mm

Output : 6A each channel - (Total 12A)

Function description:

7 single static colors

7 single colors jump (speed adjustable)

Gradual color changing (speed adjustable)

Effect Lighting


Controller - Part # BL-WC6

controllers continued..

BL-WW-2M

Cable Length: 2 MetersVoltage: 12 - 30v DCIP Rating: IP68Connection Type: Interconnecting

51

Street Lighting


This new design is widely used in street lighting. Tool-less maintenance and SAA approved for use in New Zealand.

The heat sink module has been redesigned for maximum light output and long life. Working voltage: 90-265v

AC. IP rated at IP66. Available with 1 to 6 LED modules replacing approximately 75 - 450 watt equivalent HPS

street lighting.

Applications: Urban streets, Main traffic routes, Parking lots, Factories and industry, Warehouses, Loading areas

and many other outdoor applications.

SR110-028-SAA

52

Street Lighting


Input Voltage 90 ~ 295v AC

Frequency 47 ~63Hz

Power Factor >0.9

Power Efficiency 91%

Power Consumption 35W

Colour Temperature 2600 ~ 3600K 3700 ~ 5000K 5000 ~ 10000K

LED Efficacy 84.4 Lm/W 100 Lm/W 114 Lm/W

Light Output 2150 Lm 2450 Lm 2800 Lm

Lamp Efficacy 63 Lm/W 72 Lm/W 82 Lm/W

Colour Radiation Index 80 75 75

Lights Efficacy of Lens 88%

Working Temperature -20 ~ 50 C

Working Humidity 5% ~ 95%RH

Design Life 50,000 Hours

Lamp Housing Aluminium Alloy Die Cast

Lens Polycarbonate

Weight 6 Kg

Dimensions 700 x 218 x 153mm

Installation 60mm Diameter

Standards

GB/T 24819-2009GB/T 24823-2009GB/T 24827-2009GB 7000.5-2005

IP 66SAA Approved

SR110-028-SAA

53

E40 style LED replacement lamps (optional E27 base available). Just remove the existing ballast replace the CFL

lamp with these LED equivalents. Ideal for retrofitting existing street lights and similar.

Can also be used as a high bay light replacement. Energy efficient producing 70 Lm/Watt. Aluminum housing with

PMMA lens, quality heat sink ensures long life and durability.

Applications: urban street, main traffic routes, parking lots, factories, warehouses and any other outdoor areas.

Aluminum housing with PMMA lense

Street Lighting continued..


BL-UST-36Corn

LED Count: 36Colour Temp: White 6500kLumens: 3000Voltage: 90 -264v ACConsumption - Watts: 36Fitting config: E40 Screw (E27 Available)RA: Warm >80 White >70Beam Angle: 80 - 110 degree

BL-UST-28

LED Count: 28Colour Temp: White 6500kLumens: 2240Voltage: 90 -264v ACConsumption - Watts: 28Fitting config: E40 Screw (E27 Available)

BL-FEWW36-RGB

LED Count: 66Colour Temp: White 6500KLumens: 6000Voltage: 90-264v ACConsumption - Watts: 66Fitting config: E40 Screw (E27 Available)RA: Warm >80 White >70Beam Angle: 80 - 110 degree

360 Corn Street Light (80 watt HPS replacement)

Street Light (75 watt HPS replacement)

360 Corn Street Light (150 watt HPS replacement)

Street Light - 120 degree

54

14a Moore Street

Hillcrest

Auckland NZ

PH : 09 889 0246

[email protected]


55

2012 - ledsunlimited · 2. 3. these high quality smd led replacement bulbs save power. energy...

Documents