2013_obm_multifunctiongauges

5
July 2012. Part number: 99000-79N12-118 SUZUKI MOTOR CORPORATION reserves the right to add any improvement to change the design or to discontinue any item at any time without notice. Some items might not be compatible with local standards or statutory requirements. Please check with your local AUTHORIZED SUZUKI DEALER for details at the time of ordering. Acutual colors might differ from those appearing in this catalogue. c 2012 SUZUKI MOTOR CORPORATION. All rights reserved. SUZUKI MULTI FUNCTION GAUGE SUZUKI MULTI FUNCTION GAUGE is specialized in synthetically reading basic functions for cruising and able to indicate directions and direct distance to homeport and destination. This gauge can be easily connected to SUZUKI MODULAR INSTRUMENT SYSTEM (SMIS). model engine number DF300A 30002S-310001~ DF250A 25003P-310001~ DF250T 25003F-310001~ DF250Z 25003Z-310001~ DF225T 22503F-310001~ DF225Z 22503Z-310001~ DF200T 20002F-310001~ DF200Z 20002Z-310001~ DF175T 17502F-310001~ DF175Z 17502Z-310001~ DF150T 15002F-310001~ DF150Z 15002Z-310001~ DF140AT 14002F-310001~ model engine number DF140AZ 14002Z-310001~ DF115AT 11502F-310001~ DF115AZ 11502Z-310001~ DF100A 10002F-310001~ DF90A 09003F-310001~ DF80A 08002F-310001~ DF70A 07003F-310001~ DF60A 06002F-310001~ DF50A 05003F-310001~ DF40A 04003F-310001~ DF20A 02002F-310001~ DF15A 01504F-310001~ DF9.9B 00995F-310001~ MODEL NAME AND ENGINE NUMBER 300 TAKATSUKA-CHO, MINAMI-KU, HAMAMATSU CITY, JAPAN 432-8611

Upload: jose-maria-madrigal

Post on 08-Nov-2014

92 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: 2013_OBM_MultiFunctionGauges

July 2012. Part number: 99000-79N12-118

SUZUKI MOTOR CORPORATION reserves the right to add any improvement to change the design or to discontinue any item at any time without notice. Some items might not be compatible with local standards or statutory requirements. Please check with your local AUTHORIZED SUZUKI DEALER for details at the time of ordering. Acutual colors might differ from those appearing in this catalogue. c 2012 SUZUKI MOTOR CORPORATION. All rights reserved.

SUZUKIMULTI FUNCTION GAUGE

SUZUKI MULTI FUNCTION GAUGE is specialized

in synthetically reading basic functions for

cruising and able to indicate directions and

direct distance to homeport and destination.

This gauge can be easily connected to SUZUKI

MODULAR INSTRUMENT SYSTEM (SMIS).

model engine number

DF300A 30002S-310001~DF250A 25003P-310001~DF250T 25003F-310001~DF250Z 25003Z-310001~DF225T 22503F-310001~DF225Z 22503Z-310001~DF200T 20002F-310001~DF200Z 20002Z-310001~DF175T 17502F-310001~DF175Z 17502Z-310001~DF150T 15002F-310001~DF150Z 15002Z-310001~DF140AT 14002F-310001~

model engine number

DF140AZ 14002Z-310001~DF115AT 11502F-310001~DF115AZ 11502Z-310001~DF100A 10002F-310001~DF90A 09003F-310001~DF80A 08002F-310001~DF70A 07003F-310001~DF60A 06002F-310001~DF50A 05003F-310001~DF40A 04003F-310001~DF20A 02002F-310001~DF15A 01504F-310001~DF9.9B 00995F-310001~

MODEL NAME AND ENGINE NUMBER

300 TAKATSUKA-CHO, MINAMI-KU, HAMAMATSU CITY, JAPAN 432-8611

Page 2: 2013_OBM_MultiFunctionGauges

2

MULTI FUNCTION GAUGE

MULTI FUNCTION GAUGE34200-87L10-000Applicable Model DF9.9BR/15AR/20AR/40AT-300A

Full display modeFeatures:Tachometer, shift position, speedometer, trim gauge, GPS time, trip hour, distance to homeport and destination, navigation compass, fuel manager, fuel gauge

Fuel information display modeFeatures:Fuel level of each tank, fuel flow, fuel consumption per hour, sailing distance per litter or gallon, distance to homeport and destination

Limited display modeFeatures:Tachometer, shift position, speedometer, fuel gauge, GPS time, navigation compass, trim gauge

Engine information display modeFeatures:Total hour, hour after oil change, voltmeter, coolant water temperature

Navigation display modeFeatures:Navigation compass, distance to homeport and destination, latitude and longitude, trip hour, GPS time

Modes of display

The 4.3 inch thin-film transistor liquid crystal color display

manages up to dual engines information by one display and

read all basic information for cruising. The gauge can indicate

directions of homeport and destination so that helmsman infers

present location. Moreover, it indicates various critical warning

information such as low battery voltage, engine error, low oil

pressure and overheat.

Page 3: 2013_OBM_MultiFunctionGauges

3

GAUGE ADAPTER & GPS RECEIVER MODULE & WIRE COMP. TO NMEA NETWORK & POWER CABLE

GAUGE ADAPTER36661-87L00-000Applicable Model DF9.9BR/15AR/20AR/40AT-250T/Z

GPS RECEIVER MODULE39950-87L00-000Applicable Model DF9.9BR/15AR/20AR/40AT-300A

GAUGE ADAPTER36661-87L10-000For drive-by-wire modelsApplicable Model DF250A/300A

WIRE COMP. TO NMEA NETWORK36666-87L00-000Applicable Model DF9.9BR/15AR/20AR/40AT-300A

POWER CABLE36663-98J00-0002.5 meters longApplicable Model DF9.9BR/15AR/20AR/40AT-300A

36663-98J10-0006.0 meters longApplicable Model DF9.9BR/15AR/20AR/40AT-300A

Page 4: 2013_OBM_MultiFunctionGauges

4

Example of connection for DF250A/300A with SUZUKI multi function gauge

DF250A/DF300A DUAL

DF250A/DF300A SINGLE

Ref No. Part name Part number Single

engineDual

enginewith SMIS

Quantity of T-connector (*5)

SUZUKI multi function gauge 34200-87L10-000 1 1 1 0GPS receiver module 39950-87L00-000 1 1 1 0Gauge adapter 36661-87L10-000 1 1 1 0Active hub power harness 2.5 meters 36663-98J00-000

1 1 10

Active hub power harness 6.0 meters 36663-98J10-000 0NMEA network wire 36666-87L00-000 1 0SMIS power cable with a T-connector 36663-88L00-000 1 1Fluid level sensor with a T-connector 34810-88L00-000 4 1Terminator female 36665-88L00-000 1 0T-connector 36664-88L00-000 8 1Terminator male 36665-88L00-000 1 02" SMIS multi-function gauge 34800-88L01-000

11

4" SMIS multi-function gauge 34200-88L02-000 1Gauge adapter 36661-87L00-000 0GPS receiver module 39950-88L00-000 1 1Terminal set 36990-87D00-000 0Extention cable 2 feet 36662-88L10-000 0Extention cable 6 feet 36662-88L20-000 0Extention cable 15 feet 36662-88L30-000 0Extention cable 25 feet 36662-88L00-000 0

NOTE*1:The minus (-) side of the battery is used commonly with the engine battery, or connect to GND.*2:Analog tank sender can be used commonly with NMEA tank sender. (Only up to 4 pieces as the maximum) NMEA tank sender setting up has to be carried

out by SMIS gauge. In case of setting up more than two NMEA tank senders, add the position information by SMIS gauge. (Ex.: PORT/STBD) If not added, non addition may result in impossibility of recognition or in anomaly of indication.

*3:In case of connecting with , the priority is given to .*4:Displayable items of and are the following:Engine revolutions, trimming angle, engine temperature, battery voltage, ground speed, time and position

information.*5:While some of SMIS items have a T-connector in a package, the total of the T-connector coming with them does not always satisfy the required quantity.

*1

*1

*1

*2

*3

*4

Page 5: 2013_OBM_MultiFunctionGauges

5

Example of connection for DF9.9BR/15AR/20AR/40AT-250T/Z with SUZUKI multi function gauge

DF9.9BR/15AR/20AR/40AT-250T/Z DUAL

DF9.9BR/15AR/20AR/40AT-250T/Z SINGLE

Ref No. Part name Part number Single

engineDual

enginewith SMIS

Quantity of T-connector (*7)

SUZUKI multi function gauge 34200-87L10-000 1 1 1 0GPS receiver module 39950-87L00-000 1 1 1 0Gauge adapter 36661-87L10-000 0Active hub power harness 2.5 meters 36663-98J00-000

1 1 10

Active hub power harness 6.0 meters 36663-98J10-000 0NMEA network wire 36666-87L00-000 1 0SMIS power cable with a T-connector 36663-88L00-000 1 1Fluid level sensor with a T-connector 34810-88L00-000 4 1Terminator female 36665-88L00-000 1 0T-connector 36664-88L00-000 8 1Terminator male 36665-88L00-000 1 02" SMIS multi-function gauge 34800-88L01-000

11

4" SMIS multi-function gauge 34200-88L02-000 1Gauge adapter 36661-87L00-000 1 1 1 0GPS receiver module 39950-88L00-000 1 1Terminal set 36990-87D00-000 0Extention cable 2 feet 36662-88L10-000 0Extention cable 6 feet 36662-88L20-000 0Extention cable 15 feet 36662-88L30-000 0Extention cable 25 feet 36662-88L00-000 0

NOTE*1:Connections are made only for those types equipped with a trim sender.*2:Replacement of SDS connector for engine is required.*3:The minus (-) side of the battery is used commonly with the engine battery, or connect to GND.*4:Analog tank sender can be used commonly with NMEA tank sender. (Only up to 4 pieces as the maximum) NMEA tank sender setting up has to be carried out by SMIS

gauge. In case of setting up more than two NMEA tank senders, add the position information by SMIS gauge. (Ex.: PORT/STBD) If not added, non addition may result in impossibility of recognition or in anomaly of indication.

*5.In case of connecting with , the priority is given to .*6.Displayable items of and are the following:Engine revolutions, trimming angle, engine temperature, battery voltage, ground speed, time and position information.*7:While some of SMIS items have a T-connector in a package, the total of the T-connector coming with them does not always satisfy the required quantity.

*3

*4

*5*6