E-Mail: dultmeier@dultmeier.com or davenport@dultmeier.com • Web-Site: dultmeier.com 7/25/14

DAVENPORT, IOWA601 W. 76th ST. 1-800-553-6975

OMAHA, NEBRASKA13808 IND. ROAD 1-800-228-9666

Limited Quantities Available On Some Items - Prices Subject to Change Without Notice

Products for Diesel Exhaust (DEF) and Petroleum Equipment

Page 1

DEF Tote Pumping System for 275 Gallon DEF Tanks

• Pump body is tough & rugged with excellent electrical properties; fuse included

• Field replaceable switches for easy maintenance

• Designed to fit 275 gallon DEF “Cage” Tanks with Micromatic Adapters

Part No. Description Net Ea.GI P120-DEFB 12 Volt DEF Tote Pumping System ........ $ 1205.00 GI PA120-DEFB 115 Volt DEF Tote Pumping System ...... 1340.00

DEF Poly Transfer Pumps

Part No. DEF Poly Transfer Pumps with Suction Pipe Net Ea.GI PA120-DEF Poly Gear Pump, 115 Volt, 12 GPM ...... $ 578.00 GI P120-DEF Poly Gear Pump, 12 Volt DC, 12 GPM .. 445.00

• 115 Volt or 12 Volt DC Gear Pumps, with Thermal Protector & Circuit Breaker

• Delivers up to 12 GPM

• 2” MPT Tank Connection; 1” FPT Discharge

• Includes Adjustable Suction Pipe (hose & nozzle sold separately)

• Pump Cover Unbolts Easily for Maintenance

D

These DEF Tote Pumping Systems are specifically designed to work with 275 gallon DEF “Cage” tanks (with 6.5” blue DEF lids and micromatic adapters/suction tubes).

Kits include 12 volt or 115 volt poly pump, suction hose with Micromatic coupler (RSV Style), 3/4” x 12’ DEF discharge hose, 3/4” SS automatic nozzle and powder-coated pump/nozzle hanger bracket.

“Kits” include similar pump including built-in check valve to prevent air infiltration. Also included in the “Kits” are adjustable suction pipe, 3/4” x 12’ DEF discharge hose and stainless steel manual nozzle up to 12 GPM. Bracket and Micromatic Coupler Extra - See Below.

Part No. DEF Pump “Kits” Net Ea.GI PA120-DEFA 115 Volt DEF Pump “Kit” ........................... $ 705.00 GI P120-DEFA 12 Volt DEF Pump “Kit” ............................. 605.00 GI 118450-51 Pump Bracket for 55 Gallon DEF Drums ... 88.00 GI 118450-52 Micromatic Coupler, EPV Style ................. 115.00 GI 118450-53 Micromatic Coupler, RSV Style ................. 168.00

DEF Pump “Kits”

Kits Include:

• 12V or 115V Pump

• Suction Hose

• 3/4” x 12’ DEF Discharge Hose

• Stainless Steel Manual Nozzle

PH6 Style DEF Transfer Pumps

2” MPT tank connection and 1” FPT discharge port. 20 ft. cord with battery clamps included on 12 volt models. 20 ft. cord with plug included on 115 volt models.

D

Part No. Description Wt. Net Ea.SI PH6-DEF 12V DEF Pump ONLY ..................... 12 lbs. $ 370.00SI PH6-DEFA 115 Volt DEF Pump ONLY ............... 12 lbs. 485.00 SI PH6-DEFB 12 Volt DEF Pump with suction tube & 2” x 2” x 1” bung adapter ...... 15 lbs. 428.00SI PH6-DEFC 115 Volt DEF Pump with suction tube & 2” x 2” x 1” bung adapter ...... 15 lbs. 543.00SI PH6-DEFD 12 Volt DEF Pump with SS Micromatic Coupler .................... 17 lbs. 525.00 SI PH6-DEFE 115 Volt DEF Pump with SS Micromatic Coupler .................... 17 lbs. 590.00

PH6-DEF

PH6-DEFE with Micromatic

Coupler

The PH6 DEF Diaphragm Pump is a non-UL rated transfer pump. Specifically designed for DEF.12 volt or 115 volt electric motors with 30-minute duty cycles. Flow rate is 8-10 GPM. EPDM seals.

D

Page 2

275 Gallon Pump Kit

This DEF Plumbing Kit is designed to work with 275 gallon cage tanks SA1208B or SD1208 stainless DEF pumps, shown on this page.

– Less Tank & Pump –

Part No. Description Net Ea.FR KIT180MAMPS DEF Plumbing Kit LESS Pump ..................... $ 652.00

Tanks & Pumps Sold Separately

Hand & Air-Operated DEF Pumps

Part No. Description Net Ea.FR FRHP32V DEF Hand Lever Pump ......................... $ 71.70 FR KITA32V DEF Hose (3/4” x 8’) with Ball Tap Valve (for above pump) .................................. 32.30 FR FRAP32V DEF Air Operated Pump ......................... 255.00 FR KITA32VMN DEF Hose (3/4” x 8’) with Manual Nozzle (for Air-Operated Pump)........................ 198.00

D

Hand Lever Pump• Hand Lever Pump for Fast Delivery -

11 oz. per Stroke

• Bung Adapter Included - Securely Fastens Pump to Drum

• Optional Hose Assembly with Ball Tap Valve

• Polypropylene Construction, Fluorocarbon Seals

• Telescoping Suction Pipe Included

D

D

Air-Operated Pump• Up to 6.5 GPM Flow Rate, Up to 100

PSI Air Pressure

• Bung Adapter Included - Securely Fastens Pump to Drum

• Polypropylene Construction, Fluorocarbon Seals

• Telescoping Suction Pipe Included

DEF Digital Meter

• Nylon Digital Turbine Meter with 1” FNPT

• Flowrate is 3 to 30 GPM

• Powered by (2) AAA Batteries

• 150 PSI Rating

• 1.5% Accuracy

• 6 Digit Resettable Batch & Non-Resettable Cumulative Totalizers

• Plus or Minus 1/2% Accuracy Possible with User Calibration Feature

Part No. Description Net Ea.GI 1N31GM-U DEF Digital Meter................................... $ 161.00

DEF Digital Meter

Features: 1.5% Accuracy • 6 Digit Resettable Batch & Non-Resettable Cumulative Totalizers • Plus or Minus /2% Accuracy Possible with User Calibration Feature • PBT Polyester Electronic Disc Meter with 1” FNPT Inlet/Outlet • Flowrate is 2 to 20 GPM • Powered by 9-Volt Alkaline Battery • 50 PSI Rating

Part No. Description Net Ea.GI FM300-U DEF Digital Meter................................... $ 237.00

D

D

• 16 oz. Per Stroke

• 1” Hose Barb Outlet

• 2” MPT Inlet

• “Kit” Includes Pump, Suction Tube, Discharge Hose, Ball Valve Nozzle. Bracket Sold Separately - See Adjacent Page.

Kit Includes: Stainless pump mounting plate • 3/4” x 6’ DEF hardwall suction hose • 3/4” x 12’ DEF discharge hose • 825 meter • Stainless automatic nozzle.

DEF Hand Pumps

Part No. Description Net Ea.GI LP50 DEF Hand Pump Kit .................................... $ 142.00 GI LP50A DEF Hand Pump ONLY ............................... 68.00GI 118450-51 Pump Bracket for 55 Gallon DEF Drums .... 88.00

DEF Hand Pump Systems

System Includes: Lever Action Piston Pump with MicroMatic SS RSV Coupler • 3/4” x 12’ Discharge Hose • Poly Automatic Nozzle • Drum and Drum Valve Not Included.

Part No. Description Net Ea.PJ 56-S1A Lever Action Piston Pump Kit with Automatic Nozzle and MicroMatic SS RSV Coupler ............... $ 395.00 PJ 56-S1M Same as Above Except with Manual Nozzle ........... 325.00 PJ 56-12M Lever Action Pump Kit with Telescoping Pipe ....... 135.00 PJ 56V Polypropylene Piston Pump .................................. 65.00

PJ 56-S1A

PJ 56-S1M

56-S1A Economy Lever Action Piston Pump System is designed to maintain product integrity.

56-S1M Same as 56-S1A Kit, except the automatic nozzle is replaced by a manual nozzle.

56-12M Lever Action Piston Hand Pump Kit with telescoping suction pipe to fit 55 gallon drum (2” MNPT base).

System Also Includes: 3/4” X 12’ Discharge Hose & Manual Shutoff Nozzle with Trigger Lock • Approximately 12 Strokes per Gallon.

PJ 56V

56V Polypropylene Piston Pump that uses Viton™ seals for use with various industrial chemicals such as mild acids, methyl ethyl ketone, DEF fluid and similar fluids. Complete with telescoping suction pipe to fit drums up to 55 gallon. 2” MNPT base. Approximately 12 strokes per gallon. No hose or nozzle included.

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 3

Stainless Automatic Nozzles

for Diesel Exhaust Fluid

Part No. Description Net Ea.GI 906 SS Automatic Nozzle for DEF, 3/4” FNPT ............. $ 128.00 GI 906M SS Manual Nozzle for DEF, 3/4” FNPT ............. 86.00 FR FRNS075A SS Automatic Nozzle for DEF, 3/4” FBSPP........... 220.00

• Constructed from Materials 100% compatible with Diesel Exhaust Fluid (DEF)

• Automatic Nozzle Shuts Off When the DEF Tank is Full

DEF Bulk Hose & Hose Assemblies Approved for Use with DEF

HOSE ASSEMBLIES Part No. Description Net Ea.GI 150200-1 3/4” x 12’ DEF Softwall Discharge Hose Assembly, 3/4” Poly MNPT ................................................... $ 57.25 SI DEF12 3/4” x 12’ DEF Softwall Discharge Hose Assembly, 3/4” SS MNPT ...................................................... 86.75 SI DEF20 3/4” x 20’ DEF Softwall Discharge Hose Assembly 3/4” SS MNPT ...................................................... 90.00 SI DEF12A 3/4” x 12’ DEF Softwall Discharge Hose Assembly 3/4” x 1” SS MNPT .............................................. 104.00 HN 9970.1501 3/4” x 25’ DEF Hose, MNPT x MNPT * .................. $ 110.00 HN 9970.1503 3/4” X 50’ DEF Hose, MNPT x MNPT * ................. 165.00 HN 9970.1505 3/4” X 100’ DEF Hose, MNPT x MNPT * ............... 267.00 HN 9970.1511 1” X 25’ DEF Hose, MNPT x MNPT * .................... 188.00 HN 9970.1513 1” X 50’ DEF Hose, MNPT x MNPT * .................... 275.00 HN 9970.1515 1” X 100’ DEF Hose, MNPT x MNPT * .................. 425.00* FLEXTRAL TRU BLUE Hose and Stainless Ends.

DEF Hose Assemblies are EPDM with MPT crimped ends. Bulk hose is Gates Spec #4217IS. Black EPDM tube and cover. Hose assemblies can be made in any length using Gates 12B or 16B stainless stems and ferrules or with standard stainless hose barbs.

Diesel Exhaust Fluid (DEF) Filter Systems

Std. Std. Pkg.Part No. Pkg. Discount Net Ea.CI 41060 1” FPT Stainless Filter Housing ...................... - - $ 182.50 CI 31001 *1 Micron Filter Cartridge ... 4 10% 33.05* 6 PSI Pressure Drop @ 6 GPM & 11 PSI @ 10 GPM.

Cim-Tek® Fi l trat ion understands that diesel exhaust fluid (DEF) is a key ingredient for allowing the selective catalytic reduction (SCR) systems on the truck work properly to reduce emission pollutants such as NOx (nitrogen oxides). In response to the new

2010 truck regulations for SCR systems we have developed D.E.F.-TEK® sub-micron filters for particulate removal from DEF fluid to ensure SCR systems function properly.

• Filter Removes Particulates & Crystals from DEF Fluid

• Particulate-Free DEF Will Not Plug Dosing Valve

• Ultra-Clean DEF Fluid is Critical in Making the SCR System On the Truck Function Properly

• Stainless Housing with Viton® Gaskets

• All Materials Compatible with DEF

• Rated to 150 PSI W.P.

31001 Filter Cartridge

D

D

D

BULK HOSE Std. Standard Per Ft. Part No. Description Pkg. Pkg. Discount Net Ea.GA 4217-0310 3/4” Bulk DEF Hose 550 ft. 20% $ 3.46

Manual Poly Discharge Nozzle

for Diesel Exhaust Fluid3/4” Hose Barb &

Manual Trigger Lock

Part No. Description Net Ea.PJ 389M Manual Nozzle with Trigger Lock, 3/4” HB $ 58.50

D

Part No. Description Net Ea.PJ 398 Automatic Nozzle & Meter Combination $ 395.00

Automatic Nozzle & Meter Combination for Diesel Exhaust Fluid

389M

This ergonomic, all poly construction automatic nozzle and meter combination is compact, lightweight and offers improved reliability for handling DEF. Has 1” male BSP inlet and is supplied with a 3/4” hose barb for easy connection.

398

D

Part No. Description Net Ea.PJ 70177 DEF Compatible Filter Assembly: Includes Filter Housing & 1 Micron Filter Element .................................................. $ 64.00 PJ 70176 Replacement Filter Element, 1 Micron for Above Assembly 10.00 PJ 701 Polypropylene High Flow Capacity Filter Housing ............... 98.00 PJ 70179 Replacement Filter Element for Above 701 Filter Housing .. 18.50 PJ 70182 Filter Wrench for 701 Only .................................................. 9.00 PJ 70183 Filter Mounting Bracket ...................................................... 52.00

Diesel Exhaust Fluid (DEF) Filters & Accessories

Hernon Dripstop Thread Sealant

Part No. Description Net Ea.PJ 904 Pipe Thread Sealant .......... $ 78.00

Hernon Dripstop 904 Pipe Thread Sealant is third party tested and approved, as specified in ISO-22241-2. For use with DEF. 8.25 fluid oz. tube. For use with NPT threads.

70176

701

70179

70182 Filter Wrench

904013

70177 DEF Compatible Filter Assembly includes filter housing and 1 micron filter element. Large 10” element ensures low pressure drop and large dirt holding capacity. Filter wrench is included. 3/4” FNPT ports.70176 is a replacement filter element for the above 70177 filter assembly. 1 micron.

701 Polypropylene, High Flow Capacity DEF Filter Housing. Has 1-1/2” FNPT inlet/outlet ports and uses 20” filter cartridge for maximum contaminant holding capacity, filter included. Up to 60 GPM flow rate capacity.70179 is a replacement filter element for the above 701 filter assembly. 1 micron.

70183 Filter Mounting Bracket

70177D

D

D

D

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 4

Stainless Adaptersfor Diesel

Exhaust Fluidwith Viton® Seals

Part No. Description Net Ea.HK 7285 1” M BSPP x 1” M BSPP Adapter ............................ $ 114.50 HK 7214 3/4” M BSPP x 3/4” Hose Barb Adapter with Clamp 114.50

7285 7214

2” Pressure/Vacuum Ventfor Diesel Exhaust Fluid

• Teflon Coated

• Relieves Pressure at 8 oz. / sq. inch

• Relieves Vacuum at 0.5 oz. / sq. inch

• Fits Over 2” Pipe Nipple & Attaches with Set Screws

Part No. Description Net Ea.MB 749T 2” Pressure/Vacuum Vent ............................... $ 292.00

D

3/4” MNPT x 3/4” FNPT

3/4” Stainless Breakaway for DEFfor Diesel Exhaust Fluid

Part No. Description Net Ea.MB 609DEF 3/4” Stainless Steel Breakaway ...................... $ 220.50

3/4” Stainless DEF Swivel

Part No. Description Net Ea.MB 222DEF 3/4” Stainless Steel DEF Swivel ..................... $ 115.00

222DEF

• Stainless Body • Teflon O-Rings• 3/4” MNPT x 3/4” FNPT

MORRISON

609DEFMORRISON

D

D

CONSTRUCTION DETAILS:Body: Brass Plug: BrassHandle: Pressed Steel Spring: Brass

633

Barrel Faucet

Male Thread InletFemale Thread Outlet

699F

Barrel Faucet

1" Male Pipe Threads

D

CONSTRUCTION DETAILS:Body: Brass Plug: BrassHandle: Pressed Steel Spring: Brass

DPart No. Wt. Net Ea.MB 633 1" Barrel Faucet ............... 2 lbs. $ 38.15

Part No. Barrel Faucets Net Ea.MB 699F-3/4 3/4"MPT x FPT $ 32.50MB 699F 1"MPT x FPT 45.65

MORRISON

MORRISON

MPT X MPT

MPT X MPT

12 Volt Fuel Transfer Pumps20 GPM • 12 Volt

The M3020 is a rugged 12-volt, 20 GPM rotary vane pump that’s built to perform. In internal test the M3020 lasted 2.5 times longer thatn the industry standard pump.

GPI®

• Transfers Diesel Fuel (up to 20% Biodiesel), Gasoline (up to 15% Alcohol Blends) and Kerosene

• Larger Rotors & Carbon Vanes Mean Less Wear & Longer Life

• Completely Sealed Motor provides Protection in the Harshest Environments

• Heavy-Duty 40 Amp Switch with Circuit Breaker Greatly Reduces Motor Failure

Part No. Net Ea.GI M3020ML 12 Volt Fuel Pump, Manual Nozzle .............. $ 455.00 GI M3020AD 12 Volt Fuel Pump, Automatic Nozzle .......... 560.00 GI M3020-PO Pump ONLY ................................................. 375.00 DU 1X48 1” x 48” Non-Adjustable Steel Suction Pipe . 21.50

• Closed End, Nozzle Hanger with Lock Capability Provides Additional Security

• Duty Cycle: 30 min. On, 30 min. Off

• Motor Approval: Class 1, Division 1, Group D (27 amps)

• 1” x 12’ Discharge Hose

• 18’ 12 Gauge Power Cord

• 2” MPT Bung Adapter (Suction Pipe Extra)

FEATURES

M3020AD Automatic

Nozzle

M3020ML Manual Nozzle

GPI®

M3020-PO Pump Only

D

D

D

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

dultmeier.com >>> view this catalog & order on-line!

• Shop and Order On-Line 24 Hours a Day, 7 Days a Week!

• Large Inventories of Over 3 Million Total Items!

• View Current Pricing!

• Web Specials and Bargain Corner!

• Know Your Part Numbers? Use the Web Quick Order Page!

• Hundreds of Parts List Schematics (and more to come!)

• Technical Library packed with information!

• See New Items not Shown in Our Printed Catalogs!

• Track Your Order Status and History!

• Secure Site for Safe On-Line Ordering.

Visit Us On the Internet !

Page 5

Features: Double swivels at each swivel point. • Castings are of new high-strength alloy • Extremely low resistant aerodynamics achieve a near constant velocity with minimum turbulence

• Has a smaller, lighter, and even better flow rate • Has full 360 degrees rotation on both planes.

HoseSwivels

Hose Swivels

Husky Models 0095 & 0087 Swivels are compact for easy handling and compatible with fuels containing alcohol. These swivels are high flow up to 45 GPM. Model 0095 is 360° single plane and Model 0087 is 360° multi-plane.

Husky Model 4860 is for high flow fueling. Flow rate is to 100 GPM. This swivel is 360° double plane.

No. 4860

No. 0095

No. 0087

D

D

D

Part No. Hose Swivels Net Ea.HK 16-1Mx3/4F 1"MPT x 3/4"FPT $ 24.80 HK 16-3/4Mx3/4F 3/4"MPT x 3/4"FPT 23.60

Part No. Size Flow Rate Net Ea.HK 0087 1" M x 1" F 45 GPM $ 42.05 HK 0095 1" M x 1" F 45 GPM 23.40 HK 4860 1" M x 1" F 100 GPM 69.30

D

Farm Pump Hose Assemblies

Features: Suitable for gasoline, diesel fuel, oil, E15 ethanol & B20 where UL approval is not required (Non-UL hose assemblies) • Multiple textile spiral reinforcement for increased strength • nitrile tube; black neoprene cover • Static wire included • Non-UL Listed; -40° to +180° F; 50 PSI W.P. • Permanent MPT crimped couplings. Not for Service Station Curb Pump Use or AV Gas.

D

Part No. Length I.D. Couplings Bend Radius Net Ea.GD L64-3/4X10 10' 3/4" 3/4" MPT 5” $ 25.30 GD L64-3/4X12 12’ 3/4” 3/4” MPT 5” 27.30 GD L64-3/4X15 15' 3/4" 3/4" MPT 5” 29.00 GD L64-1X10 10' 1" 1" MPT 8” 33.95 GD L64-1X12 12’ 1” 1” MPT 8” 39.60 GD L64-1X15 15' 1" 1" MPT 8” 41.35

Less 5% On 5 or More of One Size

Parker 7175 Series

Corrugated Ultra Flexible Petroleum Hose For “Constant Contact” • Biofuel Compatible

“TITANFLEX”

TITANFLEX Petroleum® Hose is designed for petroleum suction and discharge applications where full vacuum, higher working pressures, extreme flexibility and easier handling are required.

Features: For constant contact with commercial gasolines, diesel & fuel oils (including Biodiesel & Ethanol) • Extreme Flexibility • Unique non-kinking design • Lightweight, easy to lift • Abrasion, oil & ozone resistant cover. Maximum Working Pressure - See chart below. Temperature Range is -40° F. to +180° F.

SPECIFICATIONS Bend Working Wt. Vacuum TI-NO. I.D. O.D. Radius Press. /Ft. Rating SWC609-1-1/2 1-1/2" 2-1/16" 1-1/2” 250 .72 Full SWC609-2 2" 2-9/16”" 2” 250 .92 Full SWC609-3 3" 3-11/16" 3” 200 1.66 Full

Std. Pkg. Part No. I.D. O.D. Std. Pkg. DISCOUNT Net Ea.TI SWC609-1-1/2 1-1/2" 1.50” 100' 10% $ 11.10 TI SWC609-2 2" 2.5625” 100' 10% 12.70 TI SWC609-3 3" 3.6875” 100' 10% 16.60

• For Above-Ground Storage Tanks • Gasoline and Diesel Fuel• Used as a Fill Cap • Convenient to Lock (K408A)

STOPS or REDUCES: • Evaporation Loss • Water Condensation • Gasoline Weathering • Loss of starting quality • Loss of delivered Octane Rating • Gum Formation • Crankcase Oil Dilution

Pre-Vent Cap

Gasoline stored in above ground tanks equipped with open vent caps can cost you many dollars in evaporated gasoline. You can reduce such loss by installing a PreVent cap. PreVent maintains about 2.5 PSI in the storage tank, preventing vapors from leaving the tank. Diesel fuel presents another problem - water condensation inside the tank. The PreVent cap will reduce such condensation. Relieves vacuum for pump out rates to 30 GPM.

2" Male Pipe Thread

D

Part No. Std. Pkg. Net Ea.CI K408 Prevent Cap Assembly. 2" MPT 6 $ 17.60 CI K408A Prevent Cap Assembly with Anti-Theft Arm 24.35 CI 50C Replacement Cap Only ........... 12 9.29

5% Discount on Standard Package.

Oil Resistant Hose— 250 PSI —

GATES Premoflex is a premium grade spiral hose with maximum resistance

to air, water, petroleum and lubricating oils to 212° F. Recommended for gasoline, kerosene and fuel oil transfer to 120° F. Approved for breathing apparatus with air supplied

respirators. Black nitrile tube, Red C2 nitrile cover. Working pressure to 250 PSI. Continuous service from -40° to 212° F. Best selection for air hoses with oil lubricators. Available in coupled assemblies with male/female ends. For field install use with GLX crimp couplings through 1”. Hose and couplings are correct for OSHA required air hoses. Reel Wt. Std. Pkg. Per Foot

Part No. I.D. O.D. Size Per Ft. Discount Net Ea.GA 3205R-1/2 1/2" .85” 600’ .22 lbs. 20% $ 1.98 GA 3205R-3/4 3/4” 1.15” 600’ .36 lbs. 20% 3.26 GA 3205R-1 1” 1.47” 350’ .54 lbs. 20% 4.34* Available in 1/4” - 1-1/2”

3205R

D

Magnetic Liquid-Level Gauges

These Lever Action Gauges are designed

pr imar i ly for use in stationary horizontal cylindrical

farm tanks or tanks with flat heads. They are to be mounted on the centerline in the middle of

the head. 1-1/2" MNPT. Will fit tanks up to 64" in diameter.

The float and assembly are shipped unassembled. The float rod is cut to the proper length for each size tank, notched, then

inserted into the sleeve attached to the short section of lever rod, and crimped for firm retention.

Part No. 1-1/2" ROTARY GAUGE Net Ea.HS F7183 For 300, 520 & 1000 Gallon Tanks .. $ 24.95HS 5-605 Replacement Dial for rotary gauge. . 13.55

D

D

for Farm Tanks

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 6

Heavy-Duty Fuel Pumps

Heavy Duty 115-Volt Fuel Pump with meter, 12 ft. of hose & manual nozzle. 17 GPM.

Heavy Duty 115-Volt Fuel Pump with 12 ft. of hose & manual nozzle. 18 GPM. Less meter.

Heavy Duty 12-Volt Fuel Pump with 12 ft. of hose, manual nozzle, suction pipe and 15 ft. power cables. 15 GPM. Less meter.

Model 1210 with 807 Meter

Part No. SPECIALFR 1210 Pump $ 325.00 FR 807CMK Meter Kit 179.00

Part No. SPECIALFR FR700 $ 519.00

Part No. SPECIALFR FR701 $ 675.00

2 Year Warranty12 Volt

115 Volt

Model 701

Model 700

115-Volt & 230-Volt Combination

Fuel Pumps & Meters

GPI®

Wt. Part No. GPM Voltage Lbs. SPECIALGI M3120M Fuel Pump/Meter “Combo” with Manual Nozzle ............ 20 115V 60 $ 688.00 GI M3120A Fuel Pump/Meter “Combo” with Automatic Nozzle ....... 20 115V 60 758.00 GI M3130M Fuel Pump/Meter “Combo” with Manual Nozzle ............ 30 115/230V 85 1190.00 GI M3130A Fuel Pump/Meter “Combo” with Automatic Nozzle ....... 30 115/230V 87 1315.00FR 151-98 1” Adjustable Steel Suction Pipe, 22”-40” ......... 24.50

Designed for Use with Gasoline, Diesel, E15 & B20 Fuels • 30 Minute Duty Cycle • U.L. & Canadian Listed • 2-Year Warranty.Optional

Pedestal Assembly

Part No. 12VDC Voltage Pumps GPM Wt. SPECIALGI M3025CB 12-Volt Pump, Manual Nozzle ... 25 67 lbs. $ 590.00 GI M3025CB-AD 12-Volt Pump, Auto Diesel Nozzle 25 69 lbs. 656.00 GI M3025CS-PO 12-Volt Pump ONLY ................. 25 54 lbs. 536.00 DU 1X48 1” x 48” Non-Adjustable Steel Suction Pipe 21.50

12 Volt Fuel Pumps 25 GPM • 12 Volt

These 25 GPM High Capacity 12 Volt Fuel Pumps offer an inlet base located below the center of the pump for better weight distribution. This also provides quick and easy access to the strainer without removing the pump from the tank port. Constructed of lightweight, corrosion-resistant aluminum bodies. Motors have 30 minute duty cycle. Includes 1” x 18’ discharge hose, manual or auto diesel nozzle, 18’ power cord, 40 amp circuit breaker, inlet check valve, easy access strainer and 2” bung adapter (1” suction pipes extra).

with Easy Access Strainer & Weight Centering Inlet Base

30 GPM (Open Discharge) • Heavy Duty • Red • 2 Year Warranty

NOT FOR GASOLINE. DIESEL FUEL ONLY.

FILL-RITE 115/230VOLT Fuel Pump

NP310 30 GPM Pump complete with 1" x 12’ hose, 1" manual nozzle; 115/230 Volt, 3/4 HP motor. UL listed.

NP311 Same as Model NP310 but equipped with Fill-Rite 1000 gallon meter, with totalizer for 10,000,000 gallons.

NP311

NP310

Super High Flow 115/230-Volt Diesel Pump

FR319VB Diesel Pump

Part No. FR FR319VB 115/230 Volt Diesel Pump with Digital Meter, 1”x18” hose & Automatic Nozzle.

$ 1379.00

35 GPM (Open Discharge)

Part No. SPECIALFR NP310 30-GPM Pump. Less Meter .................................. $ 1038.00FR 901MK300 Meter Kit with fittings ........................................... 267.00 FR NP311 30-GPM Pump with Meter ................................... 1299.00 DU 1-1/4X48 1-1/4’X48” Suction Pipe ....................................... 24.10

12-Volt & 115-Volt

Diaphragm Pumps

Flow Rate: 13 GPM (1.5 cps fluid) 11 GPM (350 cps fluid)Pressures: 13 - 15 PSIFluid Viscosities: 0.8 cps to 1000 cpsInlet/Outlet Ports: 1" FNPT with 2” MPT Bung AdapterMotors: 12-Volt & 115-Volt, 1/4 HP & 1/3 HP with overload protection. Supplied with power cable with battery clips.

Will handle heavy viscous fluids such as lube oils, gear oils, particulate fluids, & diesel fuel.

D

This unique new spring driven dual diaphragm design allows transfer of viscosities over 1000 cps (SAE80-90W gear oil at 31° F.) as well as fluids containing particles up to 1/10" in diameter. The pump is self priming and uses a few simple parts for a minimum of low wear movement.

Wetted materials are reinforced polypropylene and stainless steel, for maximum chemical and corrosion resistance.

Note: Not for use with gasoline or fluids with low flash points. OK for oil or diesel.

Part No. Meter Hose Wt. Net Ea.FR 410 None 1" x 12' Buna 12-Volt Pump 35 lbs. $ 729.00FR 450 None 1" x 12' Buna 115-Volt Pump 35 lbs. 792.00

Series 400 pumps all include 20' heavy-duty 3-wire battery cables, nozzle,

3/4”x12’ hose & suction pipe

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 7

Model PO Pumps

Model PO Pumps for Diesel, BioDiesel & Fuel Oil PetrolMaxx Max. GPM @ Max. Spec. Close or Wt. Part No. Series GPM 20 PSI Gravity Ports HP Voltage Phase Long Cpld. Lbs. Net Ea.DU MP3010C 8 150 95 1.2 2” 3 230V 1 Close 110 $ 1194.00 DU MP3030C 8 150 95 1.2 2” 3 230V 3 Close 110 1109.00 DU MP3010D 8 150 95 1.2 2” 3 115/230V 1 Long 175 1465.00 DU MP3030D 8 155 95 1.2 2” 3 115/230V 3 Long 165 1549.00 DU MP5030D 10 225 225 0.85 2” 5 208-230/460V 3 Long 215 2120.00 DU MP7513D 15 300 260 1.2 3” 7.5 208/230V 1 Long 290 2462.00 DU MP7533D 15 300 260 1.2 3” 7.5 208-230/460V 3 Long 280 2260.00 MX PG30 30 480 480 - 3” x 2.5” - - * Pedestal Pump ONLY 115 2062.00 MX 35727 8 155 95 - 2” - - - Pedestal Pump ONLY 42 603.00 MX 35733 15 300 260 - 3” - - - Pedestal Pump ONLY 85 1007.00MX 37052 8 150 95 1.2 2” 6.5HP JD Engine - Close 75 694.00DU MP25POP 8 185 165 0.90 2” 6.5HP PowerPro - Close 85 857.00 DU MP25POPE 8 185 165 0.90 2” 6.5HP PowerPro Electric Start - Close 150 959.00 DU MP313POPE 15 300 260 1.2 3” 13HP PowerPro Electric Start - Close 150 1746.00 MX 37053 8 185 165 0.90 2” Less Engine, Pump Only for use with 5.5 HP Engine 437.50 MX 35991 15 300 260 1.2 3” Less Engine, Pump Only for use with 11 HP Engine 943.00MX PO8-HYD 8 185 165 1.2 2” Hydraulic Motor, 8-15 GPM Oil Flow Required .................... 1012.00 MX PO15-HYD 15 300 300 1.2 3” Hydraulic Motor, 8-15 GPM Oil Flow Required .................... 1710.00* Use PG30 with 20 HP, 3450 RPM Motor for Diesel.

The PO Model is available in Pedestal Pump Only or Long Coupled to TEFC electric motors and close-coupled to engines or motors. Cast Iron volute, adapter and open impeller. Steel wear plate. Type 21 mechanical seal is carbon, Ni-Resist and Viton®.

MP25POPE

37053 Pump Only

D

D

MP3010C

D

Compatible for Diesel, BioDiesel & Fuel Oil

Guard Part No. Nozzles Style Color Inlet Spout GPM Net Ea.HK 1A * Rebuilt Diesel Green 1" FPT 15/16" 25 $ 70.55 HK 1AUL * Rebuilt Unleaded Red 1" FPT 13/16" 22 70.70 HK XS * Rebuilt Diesel Green 3/4" FPT 15/16" 18 61.15 HK XSUL Rebuilt Unleaded Red 3/4" FPT 13/16" 15 63.50 HK 1HS Rebuilt Diesel, H.D. Green 1" FPT 1-1/8" 25 68.75HK 18 Rebuilt Diesel, H.D. Green 1" FPT 1-3/8" 75 111.50* HK 1A, 1AUL and XS are supplied with splash guard.

Designed for unattended fuel service. Pressure shut-off mechanism shuts

off nozzle when: pump stops, gas tank is full, nozzle falls from the fill pipe, spout raises

above the horizontal, the lever is opened before the pump is turned on, or the leak detector has not completed

its test cycle. 3/4" inlet size. Flow limited to 10 GPM installed.

Protector XS Nozzle

D

1-GS “HUSKY” General Service Automatic Nozzle is for farm and consumer pumps. New design without a check valve but with

a low flow shut-off. No. 45CHF is a high flow nozzle for use with high volume consumer pumps and not for use with gravity tanks.

The rugged trouble-free nozzle designed specifically for farm and

consumer convenience.

AutomaticFarm Nozzles

Part No. Inlet 1-GS Farm Nozzle Color Spout GPM Net Ea.HK 33C 3/4" FPT For Diesel Fuel Green 15/16” 18 $ 58.20 HK 45C 1" FPT For Diesel Fuel Green 15/16” 18 67.55 HK 45CU 1" FPT For Unleaded Fuel Red 13/16” 15 67.55 HK 45CHF 1" FPT For Diesel Fuel Green 1-1/8” 20 63.75

D

Model 45CHF

Bend Part No. Hose I.D. MPT Fittings Length Radius Net Ea.PA 7124-3/4X9 3/4" 3/4" MPT 9' 4” $ 43.10 PA 7124-3/4X10 3/4” 3/4” MPT 10’ 4” 46.65 PA 7124-3/4X12 3/4” 3/4” MPT 12’ 4” 53.40 PA 7124-1X9 1” 1” MPT 9’ 5” 60.10 PA 7124-1X12 1” 1” MPT 12’ 5” 71.85 PA 7124-1X20 1” 1” MPT 20’ 5” 107.00

Less 5% On 5 or More of One Size

D

Hardwall Gasoline Curb Pump

Hose Assemblies

Parker SuperFlex 2000

• High Quality Hardwall Curb Pump Hose Assemblies; U.L. 330 Listed

• Wire Braid Reinforcement Provides Strength, Resistance to Crushing, Kinking & Tight Bend Radius

• Tough Hypalon Cover is Highly Resistant to Cuts, Abrasion, Sun & Weather and Will Not Scratch or Mark Vehicle Finish

• Use with Unleaded & Leaded Gasoline, Diesel, E15 Ethanol & B20

• -40° to 180° F; 150 PSI W.P.

• Permanent MPT Crimped Couplings

• Not for AV Gas

Softwall Gasoline Curb Pump

Hose Assemblies

Parker SoftFlex 2000

D

Bend Part No. Hose I.D. MPT Fittings Length Radius Net Ea.GD L44-3/4X10 3/4" 3/4" MPT 10' 6” $ 37.00 GD L44-3/4X12 3/4” 3/4” MPT 12’ 6” 41.60 GD L44-3/4X14 3/4" 3/4" MPT 14' 6” 46.10 GD L44-3/4X16 3/4" 3/4" MPT 16' 6” 50.90 GD L44-3/4X20 3/4" 3/4" MPT 20' 6” 60.00 GD L44-1X12 1" 1" MPT 12' 8” 65.15 GD L44-1X14 1” 1” MPT 14’ 8” 74.50 GD L44-1X16 1" 1" MPT 16' 8” 65.65 GD L44-1X18 1” 1” MPT 18’ 8” 93.75 GD L44-1X20 1" 1" MPT 20' 8” 100.50

Less 5% On 5 or More of One Size

• High Quality Softwall Curb Pump Hose Assemblies; U.L. 330 Listed

• Multiple Textile Spiral Reinforcement for Increased Strength

• Tough Hypalon Cover is Highly Resistant to Cuts, Abrasion, Sun & Weather and Will Not Scratch or Mark Vehicle Finish

• Use with Unleaded & Leaded Gasoline, Diesel, E15 Ethanol & B20

• -40° to 180° F; 150 PSI W.P.

• Permanent MPT Crimped Couplings

• Not for AV Gas

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 8

Super High Flow 12 Volt Transfer Pump

Use for Diesel, Gasoline, E15, B20 & Kerosene

• 22 GPM thru 1” x 18” Hose & Automatic Nozzle Included (Will also

provide 25 GPM thru 1” x 12’ Hose).• 12 VDC, 1/2 HP Thermally Protected Motor (UL & cUL Certified).• 30 Minute Duty Cycle - Lightweight, Pump is Only 37 lbs.• Theft Deterrent Field-Lockable Nozzle.• Includes 2” MNPT Tank Adapter, Discharge Elbow, 1” x 18” Hose & High

Flow Automatic Nozzle.

• 20’ Long, 10 Gauge Cable Included.• Heavy Duty Cast Iron Construction with Powder-Coat Finish.• Easy Access & Field Replaceable Switch.• Use with 1-1/4” Suction Pipe (sold separately).

Standard Features:

Part No. Description Wt. Net Ea.FR FR3210 12 Volt Transfer Pump with 1” x 18’ Hose & Automatic Nozzle ....................................... 37 lbs. $ 804.00 FR FR3204 12 Volt Pump ONLY ................................... - 670.00 FR 901MK4200 Meter Kit .................................................... - 265.00 DU 1-1/4X48 1-1/4” x 48” Suction Pipe .......................... - 24.10

D

Model FR4410

Fuel PumpHeavy Duty12 & 24-VOLT

• Automatic ByPass Valve, Check Valve & Strainer

• 2" Bung Adapter, 1" Telescoping Suction Pipe

• 18’ Power Cord• Carbon Vanes & Seals• Explosion-Proof 1/4 HP UL

Listed Motor• 30 Minute Duty Cycle• No Bearing Lubrication

Required• Can Be Used with an

Automatic Nozzle

These fuel pumps are ideal for use with gas, diesel and petroleum based products.

1" x 15 ft. hose and nozzle on 12-volt and 24 volt. 20 GPM maximum flow (18 GPM with 1” meter). All pumps can be equipped with a meter kit.

2 Year Warranty

Part No. Wt. Net Ea.FR FR4210 12-Volt Pump w/Hose & Nozzle ........ 36 lbs. $ 416.00FR FR4410 24-Volt Pump w/Hose & Nozzle ........ 36 lbs. 470.50 FR 807CMK 3/4" Meter Kit for FR4410 ................. 7 lbs. 186.00 FR 901MK4200 1" Meter Kit for 4200/4400 ................ 7 lbs. 265.00 FR F8739 Repair Kit for FR4210 & FR4410 ...... - 90.00

D

D

Model FR4210

FILL-RITE 1200 Series 12-Volt Pumps have been the standard of the industry for years of trouble-free performance. Light weight, sturdy, compact — built for long service under tough operating conditions. Complete with 3/4" x 12' hose with nozzle, 1” telescoping (20" - 40") steel suction pipe, 15 ft. power cable and with or without meter.

REPAIR SERVICE

Available in

Omaha & Davenport

12-VOLT DC

Fuel Pump

Electric Fuel Dispensers

Heavy Duty - Red

2 Year WarrantyD

• Gasoline or Diesel Fuels. • 15 GPM with Manual Nozzle• UL Listed. • Self Priming to 15 ft.• Bronze Rotor/Thermoset Vanes • Check Valve & Strainer.• 1/4 HP - 12 Volt Explosion Proof Motor, 30 Min. Continuous Duty 20 Amp Draw, Thermal Overload.

Part No. Wt. Net Ea.FR 1210 12-Volt DC Fuel Pump Less Meter.......... 35 lbs. $ 338.50FR 1211 12-Volt DC Fuel Pump With 807C Meter 40 lbs. 514.00 FR BD1210C *12-Volt DC Biodiesel Pump Less Meter 40 lbs. 375.00FR 807CMK Meter Kit with fittings to add meter .......................... 186.00 FR BD807CMK *Meter Kit for Biodiesel (B20-B100) ........................ 207.50 FR F8739 Repair Kit for 1210 Pump ........................................ 90.00 FR 151-98 Replacement 1” Suction Pipe (Adj. 20” to 34.75”) 24.50* Use for B21-B100 Biodiesel Only.

Fill-Rite fuel transfer pumps and meters are currently designed to handle a maximum blend ratio of 1-20% biodiesel fuel. These mixtures of fuels are known as B1-B20. Conversion kits are available to make Fill-Rite pumps compatible with biodiesel blend ratios from above 20% (B20) all the way up to the 100% concentrate (B100) and also for E85 fuel. (see next page). Also see “BD” Models for B21-B100.

- 12 Volt - 15 GPM

REPAIR SERVICEAvailable inOmaha & Davenport

Heavy Duty - Red - 2 Year Warranty

Model 71119 GPM • 115 Volt Fuel Pump

Features:

• Cast Iron Housing• 2” x 1-1/4” Inlet, 1” Outlet• Positive Displacement, Direct Drive,

Ceramic/Carbon Rotary Seal• Integral Check Valve with Pressure

Relief Bypass Valve• 1/3 HP, Explosion-Proof,

UL Listed• Sealed Bearings & Heavy Duty

On/Off Switch• Thermal Overload Protection, Built-In

Junction Box

FILL-RITE Fuel Pump will provide 19 GPM with an automatic nozzle and 18’ of 1” discharge hose (18 GPM with large filter in-stalled). Includes 1” (Model 901) meter, 1” x 18” EPDM discharge hose and 1” automatic nozzle. Also includes 2” x 1-1/4” cast iron tank adapter to fit into 2” FPT openings. 1-1/4” suction pipe is required (sold separately). Requires 115VAC power.

Part No. Wt. Net Ea.FR 711VA 115 Volt Fuel Pump with Meter, 1”x18” hose & Automatic Nozzle ...... 61 lbs. $ 890.00 FR 710VN 115 Volt Fuel Pump Unit Only .......... - 540.00 DU 1-1/4X48 1-1/4” x 48” Steel Suction Pipe ........ - 24.10

D

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 9

Lube Oil PumpsGreat for pumping motor oils, waste oils, hydraulic oil, transmission fluid, anti-freeze and non-flammable oil base solvents.

Features: Lightweight aluminum housings and Gerotor gears • Thermally protected motors • Two piece suction pipes • 2” Bung adapter (2” MPT x 1” FPT) • 3/4” x 8’ Discharge hose with 3/4” ball nozzle valve • Built-in bypass valve and inlet screen • 30 minute on / 30 minute off duty cycle • 36” Cord with 3 prong grounded plug (no cord on 12 volt model; use 50 amp automotive type fuse) • 12 Volt model is good to 30 wt. oils at 54° F. (or 90 wt. at 80° F.) • 115/230 Volt models good to 90 wt. oils at 55° F.

Use 142102-01 Portable Cart for easy movement around your shop, from one drum to another. Cart includes (2) wheels, handle with grip, 3/4” x 12’ Suction hose, suction pipe, clevis and hitch pin.

Wt. Part No. Description Flow Rate Amp Draw Lbs. Net Ea.GI L5016 12 Volt Lube Oil Pump, 1/2 HP 4 GPM 40 Amps 34 $ 731.00 GI L5116 115/230 Volt Lube Oil Pump, 1 HP 4 GPM 7.5 Amps 25 429.00 GI L5132 115/230 Volt Lube Oil Pump, 1 HP 8 GPM 13 Amps 35 412.00GI 142102-01 Portable Cart ........................................................................................... 311.00

D

142102-01 Portable Cart

Note: Only For Use with 3/4” nozzle valve included (Not with 1/2” metering valves on other pages.)

12 Volt Oil Change SystemMakes a messy job clean and easy. Simply install the oil probe in the engine oil dipstick tube, attach the battery clips and flip the switch. Oil is safely removed and stored in the easy-to-carry container. Oil should be heated to 140˚ F. for maximum pump efficiency.

Features: Complete with necessary tubing and oil storage container • Eight foot cable with battery clips • Thermal overload protec-tion • BUNA-N impeller • 3/8” FPT • 1.4 GPM Open Flow.

D

Part No. Net Ea.SU 8050-305-426 12 Volt Oil Change System $ 125.50

1” Digital Lube Oil MeterGreat for motor oils, waste oil, hydraulic fluid, ATF, anti-freeze and other non-flammable fluids. Rated for 8-80 QPM. Two factory set calibrations: Cal A for 5-20 wt. oils and Cal B for 20-50 wt. oils, plus a 3rd Cal C for user to set in field for other products. Large 6 digit LCD display shows batch total (resettable) and cumulative total in quarts. Injection molded PBT Polyester body for durability and reliable nutating disc design for 2% accuracy (1/2% on Cal C). 1” FPT ports with 3/4” bushings included. 9V battery is field replaceable. Note: Not for use with flammable liquids or anti-freeze with more than 50% water. Rated to 50 PSI maximum pressure.

Part No. Net Ea.GI LM300 1” Digital Lube Oil Meter..................... $ 226.50

D

12-Volt & 115-Volt

Diaphragm Pumps

Flow Rate: 13 GPM (1.5 cps fluid) 11 GPM (350 cps fluid)Pressures: 13 - 15 PSIFluid Viscosities: 0.8 cps to 1000 cpsInlet/Outlet Ports: 1" FNPT with 2” MPT Bung AdapterMotors: 12-Volt & 115-Volt, 1/4 HP & 1/3 HP with overload protection. Supplied with power cable with battery clips.

Will handle heavy viscous fluids such as lube oils, gear oils, particulate fluids, & diesel fuel.

D

This unique new spring driven dual diaphragm design allows transfer of viscosities over 1000 cps (SAE80-90W gear oil at 31° F.) as well as fluids containing particles up to 1/10" in diameter. The pump is self priming and uses a few simple parts for a minimum of low wear movement.

Wetted materials are reinforced polypropylene and stainless steel, for maximum chemical and corrosion resistance.

Note: Not for use with gasoline or fluids with low flash points. OK for oil or diesel.

Part No. Meter Hose Wt. Net Ea.FR 410 None 1" x 12' Buna 12-Volt Pump 35 lbs. $ 729.00FR 450 None 1" x 12' Buna 115-Volt Pump 35 lbs. 792.00

Series 400 pumps all include 20' heavy-duty 3-wire battery cables, nozzle,

3/4”x12’ hose & suction pipe

Air Operated Diaphragm Pumps

for Petroleum Products

FEATURES• Non-Stalling

• Lube-Free

• Self-Priming (15’ on Dry Prime)

• Use 1035 & 1040 for Oil, Waste Oil & ATF

• Use 1040UL for Gasoline & Diesel Fuel

Part No. Air Operated Diaphragm Pump Net Ea.NS 1035 Polypropylene, 1/2” NPT, 14 GPM ........... $ 335.00 NS 1040 Aluminum/Poly, 1” NPT, 37 GPM ............ 585.00 NS 1040UL Aluminum, 1” NPT, 37 GPM .................... 730.00 NS 1559A2 Air Filter, Regulator, Gauge, Ball Valve, Quick Disconnect Kit ............................... 77.50 NS 96 Wall Mount Bracket ................................. 37.20

1040UL

1035

D

D

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 10

1A31GM is designed for outdoor year around use with fuel transfer pumps in the 3-30 GPM range. Calibrated for use with gasoline, diesel, or kerosene. This unit cannot be field calibrated. Uses AAA batteries that are good for 9000 hours. Accuracy is ±2.5%. 1" FPT Aluminum housing. 300

PSI., +14° F. to 130° F . Measures gallons to 9999. B100 compatible (not for ethanol).

3A31GM is an industrial grade meter with 3-50 GPM range and can be field calibrated. Accuracy is ±1-1/2%. Uses a lithium battery. Totalizer to 1MM gallons. This unit can be used for oils to 30 wt. 1" FPT Aluminum housing. 300 PSI., +14° F. to 130° F.

3A32GM is same as above, but in 2” FPT ports for 30-300 GPM.

4-Digit Digital Fuel Meters

Flow Part No. Range/GPM Net Ea.GI 1A31GM 1" Aluminum Fuel Meter 3-30 $ 146.50 GI 3A31GM 1" Aluminum Fuel Meter 3-50 329.00 GI 3A32GM 2” Aluminum Fuel Meter 30-300 735.00

GPI® MR530 High Flow Mechanical Fuel Meters

Part No. Net Ea.GI MR530 1” Mechanical Fuel Meter .................... $ 166.50 GI MR530-112 1-1/2” Mechanical Fuel Meter .............. 190.50

D

• 5 to 30 GPM (All Sizes)• Large Letter, Easy-to-Read Display• Simple Push Button Reset• Fits Virtually All Mounting Applications;

90° Rotation of Inlet & Outlet Ports• Built-In Strainer on Inlet• Can Change Factory Calibration (Diesel)

for Different Fuels• UL Listed; Suitable for Gasoline, Diesel

Fuel, Kerosene E10 & B100 Fuels

2 Year Warranty

Meters for Motor Fuels

Mechanical meters with capacities of 5-20 GPM • 50 psi • +/- 1% accuracy • Registers in gallons and tenths • 100,000 gallon totalizer • aluminum body • Not for resale use.

800 Series Mechanical Meters

1-1/2” Mechanical meters with capacities 6-40 GPM, 50 psi, +/- 2% accuracy • Register to 1000 gallons in 1/10 increments • Totalizer to 1,000,000 gallons • Aluminum body • Not for resale use • Available in liter style also (Order: 901L etc.).

TN860AN-A is 1-1/2” nutating disc meter, 6 to 60 GPM.

900 Series Mechanical Meters807

D

Part No. FUEL METERS Net Ea.FR 807C-3/4 3/4" Mechanical Fuel Meter ........................... $ 167.00FR 807C-1 1" Mechanical Fuel Meter .............................. 170.00FR 807CN-1 1” Nickel-Plated Meter * ................................ 220.00FR 807CMK 807C Meter kit with 3/4” fittings for pumps .... 186.00 FR BD807CMK Meter Kit for Biodiesel ................................... 207.50 FR BD901CMK Meter Kit for Biodiesel ................................... 300.50FR 901 1" Mechanical Fuel Meter .............................. 231.50 FR 9011.5 1-1/2” Mechanical Fuel Meter ........................ 236.00FR 820 1" Digital Fuel Meter ...................................... 219.50 FR TN860AN-A 1-1/2” Mechanical Meter, 6 to 60 GPM .......... 591.00* Use Nickel Plated Meters for E20-E95 & B20-B100.

High Capacity Digital Fuel Meters

• Stand Alone Configuration• Flow Rate of 6 to 40 GPM• Accuracy +/-1.25%; 50 PSI • Maximum Pressure is 50 PSI• Large 3/4”, Four-Digit LCD

Counter and Seven-Digit Non-Resettable Totalizer

• Temperature Range: 10°-180°F.

Part No. Description Flow Range Net Ea.FR 900D 1” Digital Fuel Meter 6 - 40 GPM $ 315.50 FR 900D-1.5 1-1/2” Digital Fuel Meter 6 - 40 GPM 315.50FR KIT900PF Retrofit Kit .............................................. 101.00

Great for high volume and accurate metering of diesel, gasoline, kerosene, mineral spirits and standard solvents. Nutating disc design in an aluminum housing. The KIT900PF Retrofit Kit includes flange, fitting and o-rings to easily connect this meter to Fill-Rite 300 Series, 700 Series (1”) and FR4210 pumps.

D

• “Sleep Mode” to Reduce Power Consumption & Memory Backup

• Electronic Head is easily Removed & Rotates Every 90 Degrees

• Measures in Gallon, Quarts, Pints, Ounces, Liters & User Defined Units

• 2-Year Warranty

Standard Features

MR530

6 to 40 GPM

DR-530 Digital Fuel Meters

GPI®

GPI®

D

Part No. Net Ea.GI DR530-3/4 3/4” Digital Fuel Meter ......... $ 255.00 GI DR530 1” Digital Fuel Meter ............ 255.00 GI DR530-112 1-1/2” Digital Fuel Meter...... 261.50

The rugged design protects the digital electronics that come programmed with seven different units of measure. Resettable batch total and non-resettable totalizer. Field calibration is easy from the front panel. Includes fittings that rotate and the meter cover can also be turned. 1% accuracy field calibration. Rated to 50 PSIG. Uses (4) AA Lithium batteries. U.L. 913, U.L. 25 Listed.

Use with Diesel, Kerosene, Gasoline (to E15) • 5 to 30 GPM

TN860AN-A

D

Inline Digital Fuel Meter

Standard Features

• For Diesel & Kerosene Only; Do Not Use with Gasoline, Water, DEF and Chemical Fluids

• Flow Rate 2-25 GPM

• Maximum Pressure 50 PSI

• Accuracy +/-1%

• 1” Inlet / Outlet

• 5 Digit Readout with Resettable Totalizer

• Turbine Measuring System

• Made Out of Anodized Aluminum

• Measures in Gallons, Liters, Quarts and Pints

• Protective Rubber Guard

Part No. Description Flow Range Net Ea.FR 1118 1” Digital Inline Fuel Meter 2 - 25 GPM $ 77.25

D

D

1118

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 11

REPLACEMENT ELEMENTS

NOTE: For most filtration applications the 10 Micron Element is used. For heavier distillates, such as No.2 fuel or diesel fuel, use the 30 Micron Element. For lighter hydrocarbons, use the 10 or 2 Micron Element. Use Hydrosorb elements for water removal.

No. 300 & 400 is a 10 or 30 Micron Nominal Spin-On Filter.No. 300HS10 is a 10 Micron Nominal “Hydrosorb” Spin On Filter. Features water absorption & particulate filtration. Designed for Gasoline & Diesel Fuels. Size is 5-1/2” x 3-3/4” in diameter. Note: Not for use with aviation fuel.

No. Elements Ports Flow Filtration Size1000 1 1" 30 GPM 5,10, 30 Microns 14H x 53000 2 1-1/2" 60 GPM 5,10, 30 Microns 14H x 104000 3 2" 90 GPM 5,10, 30 Microns 15H x 10

Part No. Std. Pkg. Net Ea.CI 800-10 10 Micron Element .............. 6 $ 16.05 CI 800-30 30 Micron Element .............. 6 15.90 CI 800HS-10II 10 Micron - Hydrosorb Type II 6 24.25 CI 800HS-30II 30 Micron - Hydrosorb Type II 6 24.35 CI 805 Aluminum Head for 800 Series - 24.85 10% Discount on Std. Pkg. Elements - Not Assorted

FPT Filter Std Part No. In/Out Ports Conn. Pkg. Net Ea. Cast Iron CI 200AH 1" FPT 1" 6 $ 13.25 HEAD CI 200H-3/4 3/4" FPT 3/4" 6 11.95 ONLY CI 200H-1 1" FPT 3/4" 6 11.15 CI 200E 10 Micron Element 3/4" 6 7.16 FILTER CI 200E-30 30 Micron Element 3/4" 6 7.18 ELEMENT CI 200AE 10 Micron Element 1" 6 7.85 CI 200AE-30 30 Micron Element 1" 6 7.99 CI 260HS10II 10M Hydrosorb Element 3/4" 12 10.90 HYDROSORB CI 260HS30II 30M Hydrosorb Element 3/4" 12 10.90 ELEMENT CI 260AHS10II 10M Hydrosorb Element 1" 12 11.65 CI 260AHS30II 30M Hydrosorb Element 1" 12 11.65 Additional 10% Quantity Discount on Standard Packages.

* 20% Discount on 36+ Not Assorted

Part No. Std. Pkg. Net Ea.CI 300-10 3/4"-10 Micron Element - 25 GPM....... 12 $ 4.76 CI 300-30 3/4"-30 Micron Element - 25 GPM....... 12 4.74 CI 300HS10II 3/4"-10 Micron “Hydrosorb” Element .. 12 7.47 CI 400-10 1" - 10 Micron Element - 25 GPM........ 12 7.44 CI 400-30 1" - 30 Micron Element - 25 GPM........ 12 7.46 CI 200H-3/4 3/4” CI Head / 300 Series .................... - 11.95 CI 400-1 1” Aluminum Head / 400 Series........... - 23.20 Additional 10% Quantity Discount on Standard Packages.

* 20% Discount on 36+ Not Assorted

Centurion Filter Housing Less Element Inlet & Part No. GPM Outlet Net Ea.CI 1000 Centurion I Housing ....... 30 1" $ 97.85 CI 3000 Centurion III Housing ....... 60 1-1/2" 220.00 CI 4000 Centurion IV Housing ....... 90 2" 325.00

Elements for Centurion HousingPart No. Std. Pkg. Net Ea.CI E02 2 Micron Element .......................... 6 $ 16.80 CI E10 10 Micron Element .......................... 6 11.50 CI EHS10II 10 Micron Hydrosorb Element ........ 6 20.45 CI E30 30 Micron Element .......................... 6 11.20 CI EHS30II 30 Micron Hydrosorb Element ........ 6 22.05 10% Discount on Standard Pkgs. of Elements - Not Assorted

Std. Std. Pkg.Part No. Pkg. Discount Net Ea.DN 495 “Golden Rod” Fuel Filter ...... 6 10% $ 32.90 DN 496 Water-Block Fuel Filter ........ 6 — 39.50 DN 495-4 Container Bowl .................... 6 10% 19.65 DN 470-7 “O” Ring Seal....................... 1 — .86 DN 470-5 Replacement Filter Element 12 10% 6.15 DN 496-5 * Water-Block Element ....... 12 10% 13.95 DN 470-15 40-Mesh Stainless Screen .. 6 — 12.50 DN 491 Filter Bowl Wrench ............. 6 — 6.75* NOTE: 496-5 element is interchangeable with 470-5

Centurion Fuel FiltersFor Service Station &

Commercial ApplicationsCenturion Fuel Filters: Have microscopic filtration and water separation. The metal canisters and elements are separate and the elements are disposable. 50 PSI. Not for Use with Aviation Fuels.

1000 1" 3000 1-1/2" 4000 2"

DD

D

800 Series – 50 PSI

800 Series Filters for service stations, truck stops and commercial high volume fueling locations.Designed to handle 40 GPM gasoline or diesel fuel. 1" inlet/outlet ports. 50 PSI. Standard element is 10 micron; however 2 & 30 micron filters are available - please specify. Size is 11” high x 5” in diameter. Note: Not for use with aviation fuel.

DD

805 Aluminum Head for 800 Series filter elements. Has 1" NPT inlet/outlet

Spin-On FiltersFuel Filters

495 FUEL FILTER: Equipped with an alcohol resistant plastic see through bowl for use with gasoline, diesel and gasohol. 150 PSI working pressure. 1" FPT ports. Bowl is equipped with a simple sediment drain valve. Packed 6 per carton. 496 FUEL FILTER: Same as the 495, but with a new filter media that absorbs and removes all water from the fuel. As this element reaches its capacity (approximately one-half cup of water), the fuel flow is restricted, signaling the time for an element change. It has a gravity flow rate of 5 GPM.

No. 470-5 & 496-5FUEL FILTER

ELEMENT, packed12 per carton

No. 495 or 496Overall Ht. 9-1/2"

4" Diameter6 per carton

No. 470-15STAINLESS STEELSTRAINER, 40 Mesh

2-1/2" diameterPacked 12 per carton

491 Filter Bowl Wrench For easy removing

without cracking bowl.

D

D

D

With "See Thru" Bowl

Service Station Fuel Filters200H-3/4Cast Iron

HEAD ONLY50 PSI

INTERCHANGEABLE WITH FOLLOWING:

PUROLATOR GP16 GILBARCO K82584 FRAM P625 WIX 24006 WIX 24009

DD

Remove water and foreign material from fuel before it enters the tank. It has a 1" NPT inlet/outlet, rugged cast iron head, and drain plug. Suited for gravity flow and pumping units up to 18 GPM. Ideal for farm, construction, and mobile applications. NO. 260HS and 260AHS ELEMENTS have hydro-sorb filtration and completely remove all water and foreign material from the fuel. They can be used as replacement for the 200E and 200AE elements. Size is 8” or 8.65” high x 3-3/4” in diameter. Not for aviation fuels.

50 PSI

All Metal Fuel FiltersFor Gasoline, Gasohol & Diesel Fuel

D D

400-1Aluminum HEAD ONLY

800-10

800HS-30II

Products for DEF & Petroleum EquipmentOmaha, Nebraska (800) 228-9666 • Davenport, Iowa (800) 553-6975

Page 12

Horizontal Fuel Storage Tanks520 - 2000 Gallons

Tanks include full length skids. Three 2" top openings, one 1-1/2" end opening for rotary gauge, red enamel finish and one 1" drain opening in head. Lift lug included. Non-UL standard (UL available). Not for Mobile Applications. Part No. Capacity Size Gauge Wt. Net Ea.HS T520-50 520 Gallon 50" x 61" 14 350 lbs. $ 696.00 HS T1000-64 1000 Gallon 64" x 72" 12 850 lbs. 1172.00 HS T1000-48 1000 Gallon 48" x 132" 12 850 lbs. 1493.00 HS T2000-64 2000 Gallon 64" x 144" 10 1300 lbs. 2555.00

Vertical Steel Diesel Storage Tanks

Gallons Diameter Height Price Ea. 10,000 12' 10' | 12,600 12' 15' Call 16,800 12' 20' for 17,000 11' 24' Delivered 21,000 12' 25' Price 25,000 12' 30' | 29,600 12' 35' |

Double Wall Diesel Tank Complete Systems

Call for Delivered Prices !

• Double Wall to Meet EPA’s SPCC Plan Requirements

• Allows You to Avoid High Costs & Rainwater Problems with Containment Dikes

• 530; 1,000; 1,900; 2,900 & 10,000 Gallon Sizes

• All Necessary Ports, Vents & Lift Eyes

• Flat Bottom

• Primed & Painted

High Volume Diesel Transfer Pump Units

Units Include PowerPro 6.5 HP manual start engines with C.A.R.B. rating or 3 HP, single phase TEFC motors. MPPetrolMaxx 2” self-priming cast iron pump with Type 21 Viton® mechanical seal designed for diesel fuel, Hannay spring rewind hose reels, Husky high flow automatic nozzle with swivel.

1” Units also include Cimtek 1” 32 GPM fuel filter with 30 micron Hydrosorb element (removes water and large amounts of dirt from fuel) and 38’ of 1” fuel transfer hose.

FPU1P

1-1/2” Units also include Cimtek 1-1/2” 60 GPM fuel filter with 2-30 micron Hydrosorb elements, 38’ of 1-1/2” fuel transfer hose and Husky 1690 1-1/2” high flow automatic nozzle. All units are mounted on steel base plates (powder-coat finish).

Hose Engine Part No. Description Flowrate Size or Motor Net Ea.DU FPU1P 1” Diesel Transfer Unit 32 GPM 1” PowerPro, 6.5 HP $ 2570.00 DU FPU1.5P 1-1/2” Diesel Transfer Unit 60 GPM 1-1/2” PowerPro, 6.5 HP 3764.00 DU FPU1-M1 1” Diesel Transfer Unit 32 GPM 1” 3 HP, 1 PH Motor 2889.00 DU FPU1.5-M1 1-1/2” Diesel Transfer Unit 60 GPM 1-1/2” 3 HP, 1 PH Motor 4037.00 DU FPU1-LE 1” Diesel Transfer Unit 32 GPM 1” Less Engine 2260.00 DU FPU1.5-LE 1-1/2” Diesel Transfer Unit 60 GPM 1-1/2” Less Engine 3469.00

E-Mail: dultmeier@dultmeier.com or davenport@dultmeier.com • Web-Site: dultmeier.com 7/25/14

DAVENPORT, IOWA601 W. 76th ST. 1-800-553-6975

OMAHA, NEBRASKA13808 IND. ROAD 1-800-228-9666

Limited Quantities Available On Some Items - Prices Subject to Change Without Notice

Products for Diesel Exhaust (DEF) and Petroleum Equipment

FREE FREIGHT on $2500 ORDERS! *

Plus Specials on Selected Equipment!

* Continental U.S. Shipments Only. Tanks & Pipe not eligible for free freight.

One Shipment. Other exclusions may apply.