2014 hba product catalog
DESCRIPTION
Vacancy/Occupancy Sensors, Daylight Harvesting, Indoor and Outdoor Wireless Lighting Controls, Networked and Stand Alone Relay/Dimming Panels, and Emergency Lighting Controls.TRANSCRIPT
Innovative. Integrated. Simple.
Product catalog
Energy Saving lighting controls
VacaNcY & occuPaNcY SENSorS
daYlIgHtINg coNtrolS
lIgHtINg coNtrol PaNElS
WIrElESS lIgHtINg coNtrolS
EMErgENcY lIgHtINg coNtrolS
2
® Registered trademarks of Hubbell Building Automation, Inc. (HBA), MYTECH Corporation and Unenco. TM Trademarks of Hubbell Building Automation, Inc. LightOWL, LightHAWK, The OMNI, wiSTAR, Daylight Tracker, IntelliDAPT, HBA WASP2, wiHUBB, Zone5, and CX are registered trademarks of Hubbell Building Automation, Inc.
Other product and company names mentioned herein may be the trademarks of their respective owners.
Printed in the United States of America. ©Copyright 2014, Hubbell Building Automation, Inc.
Hubbell Building Automation, Inc. products are protected under the following United States of American Patents: 6,222,191; 439,853; 435,798; 430,056; 430,055; 6,078,253; 5,986,357; 404,326; 404,325; 401,175; and 5,640,143.
Specifications Subject to Change Without Notification.
Product photography throughout the Hubbell Building Automation product catalog, by Jesse Knish Photography – Austin, Texas USA.
tablE of coNtENtS
Hubbell building automation
Hubbell Building Automation
HBA Energy Conservation
Support, Service and Quotes
Vacancy & occupancy Sensors
LightHAWK2TM
OMNITM
OMNI-BPTM
LightOWLTM
IWSZP Sensors
TD300 Timer
Low Voltage Switches
HBA Tracker
Power Packs and Relays
Accessories
Indoor/outdoor Sensors
WASP2TM
Dimming WASPTM
WASP Lens Options
daylighting controls
ZONE5TM
DLC Controls
Luxstat
lighting control Panels
LX Networked Lighting Controls
CX Commercial Lighting Controls
Wireless lighting controls
wiHUBB®
wiSTARTM
wiSCAPETM
Emergency lighting controls
4-7
4
6
7
8-65
10-19
20-27
28-35
36-41
42-45
46-47
48
49
50-56
57
58-65
59-61
62-64
65
65-97
66-77
78-83
84-97
98-151
100-137
138-151
152-211
153-174
175-189
190-211
212-219
go to specific section by clicking on the product category.
Hubbell Building Automation is the leading developer of groundbreaking technologies
in wireless lighting controls, LED and fluorescent controls, occupancy|vacancy sensors
and lighting control panels. With over 30 years of lighting control experience, HBA
provides complete energy-saving solutions. All HBA products come with a five-year
limited warranty.
Hubbell building automation
PagE 4
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 5
a NaME You caN truSt – HubbEll
INNoVatIVE VacaNcY/occuPaNcY SENSorS
Traditional vacancy and occupancy sensors need
adjustments throughout the year as seasons change, when
airflow is modified, or if furniture layout or occupancy
patterns change. When these sensors are not constantly
monitored and adjusted, energy savings objectives are not
met.
In response to this need, HBA introduced the industry’s
first self-adapting sensor. HBA’s patented IntelliDAPT®
technology is the key to maximizing energy savings—
from open offices to the manufacturing floor, digital
microprocessor technology makes all sensor adjustment
decisions. Smart software monitors the controlled area
and makes sensitivity and timer adjustments automatically.
Vacancy and occupancy sensors with IntelliDAPT provide
maintenance-free “install-and-forget” operations.
INtEgratEd NEtWorkEd lIgHtINg coNtrolS
Hubbell Building Automation’s innovative CX Commercial
Lighting Control Panel offers expanded programming
options to increase energy conservation, and can save
up to 50% in labor and materials when used in place of
conventional time clock and contactor combinations.
The LX Series Lighting Control Panels deliver networked
lighting controls with rich functionality, an easy-to-use
graphical user interface for local and remote system
management, and unmatched integration support for other
building systems and network protocols.
WIrElESS lIgHtINg coNtrolS
Hubbell Building Automation proudly offers wiHUBB®,
wiSTARTM and wiSCAPETM indoor and outdoor wireless
lighting controls. While installation of wired systems is often
complicated and costly, Hubbell Building Automation’s
wireless lighting controls feature a future-proof design
including a self-healing wireless mesh network. Many
wireless-enabled fixtures are available through our family of
quality brands under the umbrella of Hubbell Lighting.
Wireless lighting controls allow for individual fixture control
without needing to know how the circuit is wired or having
to pull control wires to each fixture location.
Hubbell Building Automation, a subsidiary of Hubbell Incorporated (A Delaware
Corporation), manufactures a complete suite of energy-saving lighting control solutions.
Founded in 1888 by Harvey Hubbell II, Hubbell Inc. has been a long-time contributor to new product design and
manufacturing innovation. In 1896, Hubbell invented the world’s first lighting control device: the pull chain switch.
More than 100 years later, Hubbell Building Automation (HBA), headquartered in Austin, Texas, continues a
tradition of innovation with the development of a vast array of energy-saving lighting controls.
PAgE 6 hubbell-automation.com
Hubbell Building Automation offers a broad range of vacancy and occupancy sensors and lighting
controls that meet the latest energy efficiency codes and standards.
ENErgY coNSErVatIoN
Energy conservation has become a significant global movement,
with nations, states, and local municipalities creating new codes
and standards of efficiency for both commercial and residential
buildings. These codes and standards include:
• LEED® (Leadership in Energy and Environmental Design) certification in new and renovated facilities through the U.S. Green Building Council (USGBC) promotes sustainable building design.
• California Energy Commission’s (CEC) Title 24 program enforces stringent standards and regulations to reduce energy consumption, including automatic lighting control and shut-off .
• ASHRAE/IESNA 90.1 energy efficiency code requires interior lighting in all buildings to be controlled with automatic devices.
• IECC® (International Energy Conservation Code) compliance requires automatic shut-off of lighting which is
now adopted by most states in some form.
As energy concerns increase, the “greening” of commercial and
residential buildings will continue through stringent standards
and energy conservation initiatives like the EPA’s ENERGY STAR
program, or the 2030 Challenge which aims to reduce energy
use by 50% before 2030.
Hba lIgHtINg coNtrolS PlaY a kEY rolE
In the U.S., lighting consumes 22% of electricity and represents
$40 billion a year in energy costs. In a typical office building,
where lighting accounts for 35 to 45% of energy use, HBA Lighting
Controls have the potential to reduce wasted lighting by 13 to 90%
for a significant return on investment (ROI).
backEd bY Hba SErVIcE aNd SuPPort
HBA Occupancy Sensors are backed by Hubbell Building
Automation’s sustainability initiative and superior service with
support including:
• Valuable online ROI worksheet for calculating energy
savings
• Product selection guide for choosing the right HBA
Occupancy Sensor and technology
• Online specification assistance through AutoCAD
drawings, templates and documentation
• Comprehensive design assistance for deploying
vacancy/ occupancy sensors in a variety of applications
• Highly knowledgeable network of specification
professionals and trained, dedicated sales staff
• A commitment to safeguard the environment through
environmental stewardship, innovative products and
efficient operations
For more information about Hubbell Building Automation’s sustainability initiative and access to our complete suite of
online tools, visit our website at www.hubbell-automation.com.
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 7
Hubbell Building Automation provides thorough
answers to your questions and ensures the best
service.
SuPPort, SErVIcE aNd QuotatIoNS
HBA’s Service and Support groups are available daily from
8am to 5pm CST.
cuStoMEr SErVIcE
Get a personalized level of service:
• Detailed product knowledge
• Fast and accurate order entry
• Timely order acknowledgments
• Order management from initial ordering to shipping
tEcHNIcal SErVIcES
HBA’s technical services include quotations, factory-certified
occupancy sensor layouts, technical phone support, application
support, and technical documentation.
QuotatIoNS
HBA’s Quotations Group coordinates with the Technical
Services Group to provide detailed drawings and accurate
quotations, working with you to ensure all needs of your project
are fulfilled. Get detailed submittal packages, necessary
product documentation and project-specific information.
factorY-cErtIfIEd laYoutS
We guarantee the type and placement of each control on
every drawing. Send electronic AutoCAD files and we’ll create
a factory-certified, competitive layout with a detailed Bill of
Materials.
coNtact INforMatIoN
telephone — austin, tX uSa 512.450.1100
telephone — toll-free888.698.3242
fax — orders only512.450.0864
fax — general 512.450.1215
fax — toll-free customer Service 877.783.9201
corporate Websitehubbell-automation.com
technical drawing [email protected]
Vacancy & occupancy Sensors
PAgE 8
DUAL TECHNOLOgY
Dual technology sensors combine passive
infrared and ultrasonic technologies for
maximum reliability. Both technologies
must detect occupancy to activate lighting,
and only one technology is required to
keep lighting on. Dual technology sensors
are the best solution for most applications.
PASSIvE INfRARED TECHNOLOgY
Passive infrared sensors provide the best
solution for major motion detection. These
sensors use a specially designed lens to
divide the space into separate zones. When
a person crosses between these zones, the
sensor detects occupancy. Passive infrared
sensors are perfect for small, enclosed
spaces with frequent occupant movement.
ULTRASONIC TECHNOLOgY
Ultrasonic sensors provide the best solution
for detecting minor motion such as typing,
reading, and writing. These sensors emit a
safe, inaudible sound wave into the control
space. Minor movements cause frequency
shifts in the emitted waves which are detected
by the senor. Because ultrasonic sensors are
volumetric and do not require a clear line of
sight, they are ideal for hallways or restrooms
with stalls.
MOST RELIABLE MOTION SENSINg TECHNOLOgIES
A sensor is only as good as it’s proper use and placement. Different applications require different sensor technologies to provide
you with the best sensor coverage and performance. Hubbell Building Automation's motion sensors are available with the most
reliable indoor motion sensor technologies currently available: Passive Infrared (PIR), Ultrasonic (US), and Dual Technology.
Control Energy Costs
THE RIgHT TECHNOLOgY fOR THE RIgHT APPLICATION
IntelliDAPT® is HBA's patented self-adapting sensor technology that enables automatic sensitivity and timing adjustments for
true install-and-forget operation. IntelliDAPT technology comes standard in HBA’s OMNI, LightOWL and LightHAWK sensors
and switches. It works in conjunction with Passive Infrared, Ultrasonic and Dual technology to maximize energy savings.
PAgE 9(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
PAgE 10 hubbell-automation.com
LightHAWK2TM Dual Technology Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS
With a coverage area of up to 1,000 square feet and 180° of detection, the
LightHAWK2TM Dual Technology Wall Switch Sensor combines ultrasonic (US) and
passive infrared (PIR) technologies for unequaled motion detection. By far the
most versatile and widely used sensor in the LightHAWK2 product line, this sensor
can be used in a large number of applications,and won’t leave users waving their
hands in the dark.
LHMT sensors feature Hubbell Building Automation’s patented IntelliDAPTTM
technology, which makes all the sensor adjustment decisions automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation. With
selectable operating modes—auto on/off or manual on/auto off—and a built-
in photosensor for automatic daylight harvesting, LHMT sensors are the most
capable choice in today’s marketplace.
PRODUCT fEATURES
4.2”
1.8”
2.1”
Fits Standard Decorator Style Wallplate (sold separately)
RhinoTuffTM
Vandal Resistant Lens
On/Off Button
Ultrasonic Sensor
Galvanized Steel Mounting Strap
LHMTD2
LHMTS1
DAYLIGHTHARVESTING IntelliDAPT
OCCUPANCYSENSING
• Digital dual technology: (US) and (PIR) sensors
• IntelliDAPT self-adaptive technology—no manual adjustment required
• 1 or 2 relay models for single-level switching or bi-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 1,000 square-foot, 180° coverage area
• RhinoTuff™ vandal resistant lens
• Dual 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year limited warranty
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
347VAC
120277
VAC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 11
general Specifications
IntelliDAPT Technology Self-adjusting timer Self-adjusting Ultrasonic (US) and passive infrared (PIR) sensitivity Automatic false-on/false-off corrections No manual adjustments required
Time Delay Auto mode: 4–30 minutes; self-adjusts based on occupancy Fixed mode: 4, 8, 15, and 30 minutes Test mode: 5 seconds
Ultrasonic (US) Output 40kHz output
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical RhinoTuff lens
Photocell Natural light override range: 10–500 foot-candles
Coverage 1,000 square-foot, 180° coverage area
Power Requirements 120/277VAC; 50/60Hz 347VAC; 50/60Hz 24VDC (requires UVPP)
Electrical Ratings 120VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP 277VAC: 1,800W Fluorescent; 1/6 HP 347VAC; 1,500W Fluorescent; 1/6 HP
Minimum Load Requirements None
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing—high-impact injection-molded plastic (UL-94-5V) Impact-resistant lens Color-coded leads are 6” long Wrap-around galvanized steel mounting strap
Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extension
Weight 2.9 oz
Color White; Ivory; Light Almond; Gray; Black
Mounting Single-gang NEMA-style switch box (standard switch box) Decorator-style wall plate sold separately
Warranty Five-year limited
MODELlHMtS LightHAWK2™
Dual Technology Single Relay
lHMtd LightHAWK2™ Dual Technology Dual Relay
WIRINgg ground (120/277v)N Neutral (120/277v)
24V Low voltageg347 ground (347v)N347 Neutral (347v)
BUTTONS0
1*
2†
COLORWH WhiteIV Ivoryla Light AlmondgY graybk Black
NOTE: * Only available with LightHAWK2™ Dual Technology Single Relay. † Only available with LightHAWK2™ Dual Technology Dual Relay. - Wall switch plates are sold separately. - Low voltage sensors require a power pack that is sold separately. See wiring diagram on specification sheet.
ordering Information
MODEblank Switchable vacancy
or Occupancy ModeM vacancy Mode Only
dual load Wiring With NeutralSingle load Wiring Without Neutral
PAgE 12 hubbell-automation.com
LightHAWK2TM Ultrasonic Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS
PRODUCT fEATURES
The LightHAWK2TM Ultrasonic Wall Switch Sensor uses ultrasonic (US) technology
for detecting minor movement in areas with line-of-sight obstacles such as cubicles
and stalls. Because ultrasonic technology is volumetric in nature, its coverage
pattern can adapt itself to fill oddly shaped spaces such as alcoves, recesses,
and nooks. This sensor has a coverage area of up to 400 square feet and 180° of
detection. This sensor includes HBA patented IntelliDAPT® technology.
LHUS sensors feature Hubbell Building Automation’s patented IntelliDAPTTM
technology, which makes all the sensor adjustment decisions automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
With selectable operating modes—automatic ON/OFF or manual ON/automatic
OFF—and a built-in photosensor for automatic daylight harvesting, the LHUS
sensors are the most capable choice in today’s market place.
• Digital Ultrasonic (US) sensor
• IntelliDAPT self-adaptive technology—no manual adjustment required
• 1 or 2 relay models for single-level switching or bi-level switching control
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 1,000 square-foot, 180° coverage area
• Dual 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year warranty
4.2”
1.8”
2.1”
Fits Standard Decorator Style Wallplate (sold separately)
On/Off Button
Galvanized Steel Mounting Strap
LHUSD2
Ultrasonic Sensor
LHUSS1
DAYLIGHTHARVESTING IntelliDAPT
OCCUPANCYSENSING
Photo Cell/LED Indicator
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
347VAC
120277
VAC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 13
General Specifications
IntelliDAPT Technology Self-adjusting timer Self-adjusting ultrasonic (US) sensitivity Automatic false-on/false-off corrections No manual adjustments required
Time Delay Auto mode: 4–30 minutes; self-adjusts based on occupancy Fixed mode: 4, 8, 15, and 30 minutes Test mode: 5 seconds
Ultrasonic (US) Output 40kHz output
Photocell Natural light override range: 10–500 foot-candles
Coverage 400 square-foot, 180° coverage area
Power Requirements 120/277VAC; 50/60Hz 347VAC; 50/60Hz 24VDC (requires UVPP)
Electrical Ratings 120VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP 277VAC: 1,800W Fluorescent; 1/6 HP 347VAC; 1,500W Fluorescent; 1/6 HP
Minimum Load Requirements None
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing—high-impact injection-molded plastic (UL-94-5V) Color-coded leads are 6” long Wrap-around galvanized steel mounting strap
Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extensionWeight 2.9 oz
Color White; Ivory; Light Almond; Gray; Black
Mounting Single-gang NEMA-style switch box (standard switch box) Decorator-style wall plate sold separately
Warranty Five-year limited
NOTE: * Only available with LightHAWK2™ Ultrasonic Single Relay. † Only available with LightHAWK2™ Ultrasonic Dual Relay. - Wall switch plates are sold separately. - Low voltage sensors require a power pack that is sold separately. See wiring diagram on specification sheet.
Ordering Information
MODELlHuSS LightHAWK2™ Ultrasonic
Single RelaylHuSd LightHAWK2™ Ultrasonic
Dual Relay
BUTTONS01*2†
WIRINgg ground (120/277v)N Neutral (120/277v)
24V Low voltageg347 ground (347v)N347 Neutral (347v)
COLORWH WhiteIV Ivoryla Light AlmondgY graybk Black
MODEblank Switchable vacancy
or Occupancy ModeM vacancy Mode Only
dual load Wiring With NeutralSingle load Wiring Without Neutral
PAgE 14 hubbell-automation.com
LightHAWK2TM Passive Infrared Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS
The LightHAWK2™ Passive Infrared Wall Switch Sensor uses passive infrared
(PIR) technology to detect motion. The most affordable of the motion detecting
technologies, this sensor type is ideal for detecting large motion in areas with an
unobstructed view of the sensor. This sensor has a coverage area of up to 1,000
square feet and 180° of detection.
LHIR sensors feature Hubbell Building Automation’s patented IntelliDAPTTM
technology, which makes all the sensor adjustment decisions automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
With selectable operating modes — automatic ON/OFF or manual ON/automatic
OFF — and a built-in photosensor for automatic daylight harvesting, LHIR sensors
are the best choice in today’s market place.
PRODUCT fEATURES
• Digital passive infrared (PIR) sensor
• IntelliDAPT self-adaptive technology—no manual adjustment required
• 1 or 2 relay models for single-level switching or bi-level switching control
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 1,000 square-foot, 180° coverage area
• RhinoTuff™ vandal resistant lens
• Dual 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year warranty
4.2”
1.8”
2.1”
Fits Standard Decorator Style Wallplate (sold separately)
RhinoTuffTM
Vandal Resistant Lens
On/Off Button
Photo Cell/LED Indicator
Galvanized Steel Mounting Strap
LHIRD2
LHIRS1
DAYLIGHTHARVESTING IntelliDAPT
OCCUPANCYSENSING
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
347VAC
120277
VAC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 15
Ir Motion
General Specifications
IntelliDAPT Technology Self-adjusting timer Self-adjusting passive infrared (PIR) sensitivity Automatic false-on/false-off corrections No manual adjustments required
Time Delay Auto mode: 4–30 minutes; self-adjusts based on occupancy Fixed mode: 4, 8, 15, and 30 minutes Test mode: 5 seconds
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical RhinoTuff lens
Photocell Natural light override range: 10–500 foot-candles
Coverage 1,000 square-foot, 180° coverage area
Power Requirements 120-277VAC; 50/60Hz 347VAC; 50/60Hz 24VDC (requires UVPP)
Electrical Ratings 120VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP 277VAC: 1,800W Fluorescent; 1/6 HP 347VAC; 1,500W Fluorescent; 1/6 HP
Minimum Load Requirements None
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing—high-impact injection-molded plastic (UL-94-5V) Impact-resistant lens Color-coded leads are 6” long Wrap-around galvanized steel mounting strap
Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extensionWeigh 2.9 oz
Color White; Ivory; Light Almond; Gray; Black
Mounting Single-gang NEMA-style switch box (standard switch box) Decorator-style wall plate sold separately
Warranty Five-year limited
MODELlHIrS LightHAWK2™ Passive
Infrared Single RelaylHIrd LightHAWK2™ Passive
Infrared Dual Relay
NOTE: * Only available with LightHAWK2™ Passive Infrared Single Relay † Only available with LightHAWK2™ Passive Infrared Dual Relay - Wall switch plates are sold separately. - Low voltage sensors require a power pack that is sold separately. See wiring diagram on specification sheet.
Ordering Information
WIRINgg ground (120/277v)N Neutral (120/277v)
24V Low voltageg347 ground (347v)N347 Neutral (347v)
COLORWH WhiteIV Ivoryla Light AlmondgY graybk Black
BUTTONS0
1*
2†
MODEblank Switchable vacancy
or Occupancy ModeM vacancy Mode Only
dual load Wiring With NeutralSingle load Wiring Without Neutral
PAgE 16 hubbell-automation.com
LightHAWK2TM Night Light PIR Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS
Whether used for code compliance or for mere convenience, the LightHAWK2™
Night Light Wall Switch Sensor combines passive infrared (PIR) technology with the
added safety and comfort of a night light. Ideal for use in the hospitality industry,
this sensor has a coverage area of up to 1,000 square feet and 180° of detection
and is ready to use anywhere a little extra light would make all the difference.
LHIR sensors feature Hubbell Building Automation’s patented IntelliDAPTTM
technology, which makes all the sensor adjustment decisions automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation. With
selectable operating modes — automatic ON/OFF or manual ON/automatic OFF
— and a built-in photosensor for automatic daylight harvesting, LHN-IR sensors
are the best choice in today’s market place.
PRODUCT fEATURES
4.2”
1.8”
2.1”
Fits Standard Decorator Style Wallplate (sold separately)
Night Light Behind RhinoTuffTM
Vandal Resistant Lens
On/Off Button
Galvanized Steel Mounting Strap
LHN-IRS1
DAYLIGHTHARVESTING IntelliDAPT
OCCUPANCYSENSING
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
• Digital passive infrared (PIR) sensor
• IntelliDAPT self-adaptive technology—no manual adjustment required
• 1 or 2 relay models for single-level switching or bi-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Night Light mounted under lens
• 1,000 square-foot, 180° coverage area
• RhinoTuff™ vandal resistant lens
• Dual 120/277 VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year limited warranty
Photo Cell/LED Indicator
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 17
Single relay Wiring Without Neutral
Ir Motion
General Specifications
IntelliDAPT Technology Self-adjusting timer Self-adjusting passive infrared (PIR) sensitivity Automatic false-on/false-off corrections No manual adjustments required
Time Delay Auto mode: 4–30 minutes; self-adjusts based on occupancy Fixed mode: 4, 8, 15, and 30 minutes Test mode: 5 seconds
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical RhinoTuff lens
Photocell Natural light override range: 10–500 foot-candles
Coverage 1,000 square-foot, 180° coverage area
Power Requirements 120/277VAC; 50/60Hz
Electrical Ratings 120VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP 277VAC: 1,800W Fluorescent; 1/6 HP
Load Requirements None
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing—high-impact injection-molded plastic (UL-94-5V) Impact-resistant lens Color-coded leads are 6” long Wrap-around galvanized steel mounting strap
Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extensionWeight 2.9 oz
Color White; Ivory; Light Almond; Gray; Black
Mounting Single-gang NEMA-style switch box (standard switch box) Decorator-style wall plate sold separately
Warranty Five-year limited
MODELlHN-IrS LightHAWK2™ Night
Light Passive Infrared Single Relay
WIRINgN Neutral (120/277v)
N347 Neutral (347v)
BUTTONS1
COLORWH WhiteIV Ivoryla Light AlmondgY graybk Black
ordering Information
lHN-IrS
MODEblank Switchable vacancy
or Occupancy ModeM vacancy Mode Only
1
NOTE: - Wall switch plates are sold separately.
PAgE 18 hubbell-automation.com
LightHAWK2TM Dimming Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS
The LightHAWK2™ Dimming Wall Switch Sensor combines passive infrared (PIR)
technology with the additional energy savings of 0-10V dimming. The user can set
the occupied level to a predetermined level or set the sensor to activate to the
last-used dimming level. With ON/OFF and Dimming Control, the user can easily
adjust the light level for their area. This sensor has a coverage area of up to 1,000
square feet and 180° of detection.
LHIR sensors feature Hubbell Building Automation’s patented IntelliDAPTTM
technology, which makes all the sensor adjustment decisions automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
With selectable operating modes — automatic ON/OFF or manual ON/automatic
OFF, occupancy on to predetermined dimming level go to last dimming setting
upon occupancy — and a built-in photosensor for automatic daylight harvesting,
LHD-IR sensors are the best choice in today’s market place.
PRODUCT fEATURES
• All-digital passive infrared (PIR) sensor
• 0-10V dimming capabilities
• IntelliDAPT self-adaptive technology—no manual adjustment required
• 1 relay model for single-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 1,000 square-foot, 180° coverage area
• RhinoTuff™ vandal resistant lens
• Dual 120/277V or 347V operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year warranty
4.2”
1.8”
2.1”
Fits Standard Decorator Style Wallplate (sold separately)
RhinoTuffTM
Vandal Resistant Lens
On/Off Button
Galvanized Steel Mounting Strap
LHD-IRS3
DAYLIGHTHARVESTING IntelliDAPT
OCCUPANCYSENSING
Raise Button
Lower Button
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
Photo Cell/LED Indicator
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 19
Single relay Wiring Ir Motion
General Specifications
IntelliDAPT Technology Self-adjusting timer Self-adjusting passive infrared (PIR) sensitivity Automatic false-on/false-off corrections No manual adjustments required
Time Delay Auto mode: 4–30 minutes; self-adjusts based on occupancy Fixed mode: 4, 8, 15, and 30 minutes Test mode: 5 seconds
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical RhinoTuff lens
Dimming 0-10V, Sink up to 30mA
Photocell Natural light override range: 10–500 foot-candles
Coverage 1,000 square-foot, 180° coverage area
Power Requirements 120-277VAC; 50/60Hz
Electrical Ratings 120-277VAC: 800W Incandescent; 1,000W Fluorescent; 1/6 HP
Load Requirements None
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing—high-impact injection-molded plastic (UL-94-5V) Impact-resistant lens Color-coded leads are 6” long Wrap-around galvanized steel mounting strap
Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extension
Weight 2.9 oz
Color White; Ivory; Light Almond; Gray; Black
Mounting Single-gang NEMA-style switch box (standard switch box) Decorator-style wall plate sold separately
Warranty Five-year limited
MODELlHd-IrS LightHAWK2™ Dimming
Passive Infrared Single Relay
ordering Information
lHd-IrS
COLORWH WhiteIV Ivoryla Light AlmondgY graybk Black
BUTTONS3
3
NOTE: - Wall switch plates are sold separately.
MODEblank Switchable vacancy
or Occupancy ModeM vacancy Mode Only
WIRINgN Neutral (120/277v)
N347 Neutral (347v)
PAgE 20 hubbell-automation.com
OMNIDT2000
OMNITM Low voltage Dual Technology Ultrasonic and PIRCEILINg MOUNT OCCUPANCY SENSORS
The OMNIDT combines ultrasonic (US) and passive infrared (PIR) technologies
to turn lighting on and off based on occupancy. This dual technology provides
accurate turn-ons while virtually eliminating false-offs. This sensor features
Hubbell Building Automation’s patented IntelliDAPT technology, which makes all
the sensor adjustments automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled
area and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology - no manual adjustment
required
• All-digital dual technology (ultrasonic [US] and
passive infrared [PIR]) sensor
• Non-volatile memory for sensor settings
• 500–2,000 square-foot coverage area (depending on model)
• Optional relay and photocell control
• Optional Quick to Install (QTI) connector
• UL and cUL listed
• California Title 24 compliant
• Five-year limited warranty
1.5”
PIR Sensor
4.5”
UltrasonicSensor
IntelliDAPTOCCUPANCY
SENSING
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 21
ModEloMNI
oMNI dt
tEcHNologYdt Dual Technology
coVEragE500 500 sq. ft.
1000 1,000 sq. ft.2000 2,000 sq. ft.
rElaY / PHotocEll oPtIoN
rP Relay & Photocellblank No Option
QtIQtI Quick to Install
blank No QTI
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds Automatic false-on/false-off corrections
LED Lamp Red - infrared motion Green - ultrasonic detection
Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Ultrasonic (US) Output OMNIDT500: 40kHz output OMNIDT1000 and OMNIDT2000: 32kHz
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0 to 1,000 lux)
Coverage 500 sq ft; 180° coverage 1000 sq ft; 180° coverage 2000 sq ft, 360° coverage
Power Requirements 24V, 33mA (uses UVPP and MP- Series power pack- not included)
Output 24V active high-logic control signal with short circuit protection and optional dry contact (see RP options)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C)
Relative humidity (non-condensing): 0% to 95%
Construction Casing- rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors
Color-coded leads are 6” long
Dimensions 4.5”DIA, 1.5”H
Weight 5.0 oz
Color Off-white
Mounting Mounting base provided Recommended mounting height: 8ft with a max mounting height of 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
12'
23'
22'23'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
16'
12'
32'23'
22'23'
32'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
32' 23'
64'45'
12'22'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
ordering Information
OMNIDT2000OMNIDT1000OMNIDT500
PAgE 22 hubbell-automation.com
OMNIUS500
OMNITM Low voltage Ultrasonic Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS
The OMNIUS uses ultrasonic (US) technology to turn lighting on and off based on
occupancy. Designed specifically for both areas with obstructions (e.g. columns,
cubicles, stalls, and filing cabinets) and areas with long periods of minor-motion
activity (e.g. typing), this sensor features Hubbell Building Automation’s patented
IntelliDAPT technology, which makes all the sensor
adjustments automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled
area and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget
operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology - no manual
adjustment required
• Superior all-digital ultrasonic (US) minor motion detection
• Non-volatile memory for sensor settings
• 500–2,000 square-foot coverage area
(depending on model)
• Optional relay and photocell control
• Optional Quick to Install (QTI) connector
• UL and cUL listed
• California Title 24 compliant
• Five-year limited warranty
1.5”
UltrasonicSensor
4.5”
IntelliDAPTOCCUPANCY
SENSING
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 23
ModEloMNI
oMNI uS
tEcHNologYuS Ultrasonic
coVEragE500 500 sq. ft.1000 1,000 sq. ft.2000 2,000 sq. ft.
rElaY / PHotocEll oPtIoNrP Relay & Photocell
blank No Option
QtIQtI Quick to
Installblank No QTI
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic thresholds Automatic false-on/false-off corrections
LED Lamp Green - ultrasonic motion
Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Ultrasonic (US) Output OMNIUS500: 40kHz output OMNIUS1000 and OMNIUS2000: 32kHz output
RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux)
Coverage 500–2,000 square feet (depending on model)
Power Requirements 24V, 33mA (uses UVPP and MP- Series power pack- not included)
Output 24V active high-logic control signal with short circuit protection and optional dry contact (see RP options)
24V active high-logic control signal with short circuit protection
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing - rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long
Dimensions 4.5”DIA, 1.5”H
Weight 8.2 oz
Color Off-white
Mounting Mounting base provided
Recommended mounting height: 8ft with a max mounting height of 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
ordering Information
64'45'
23'32'
Minor Motion
Major Motion
23'
23'
Minor Motion
Major Motion
16'
16’
23'
23'
32'
32'
Minor Motion
Major Motion
US 2000 RangeUS 1000 RangeUS 500 Range
PAgE 24 hubbell-automation.com
OMNIIR
OMNITM Low voltage Passive Infrared Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• All-digital passive infrared (PIR) sensor
• Non-volatile memory for sensor settings
• 450 - 1,500 square-foot coverage area (depending on model)
• Optional relay and photocell control
• Optional Quick to Install (QTI) connector
• UL and cUL listed
• California Title 24 compliant
• Five-year limited warranty
The OMNIIR uses passive infrared (PIR) technology to turn lighting on and off
based on occupancy. Designed specifically for areas with long-range major-motion
activity, this sensor features Hubbell Building Automation’s patented IntelliDAPT
technology, which makes all the sensor adjustments automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled
area and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
1.5”
PIR Sensor
4.5”
IntelliDAPTOCCUPANCY
SENSING
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 25
ModEloMNI
oMNI Ir
tEcHNologYIr Passive Infrared
coVEragEl Long Range IR,
1,500 sq. ft.blank 450 sq. ft.
rElaY / PHotocEll oPtIoNrP Relay & Photocell
blank No Option
QtIQtI Quick to Install
blank No QTI
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds Automatic false-on/false-off corrections
LED Lamp Red - infrared motion
Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux)
Coverage 450 - 1,500 square feet
Power Requirements 24V, 33mA (uses UVPP and MP- Series power pack- not included)
Output 24V active high-logic control signal with short circuit protection and optional dry contact (see RP options)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing - rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long
Dimensions 4.5”DIA, 1.5”H
Weight 5.0 oz
Color Off-white
Mounting Mounting base provided
Recommended mounting height: 8ft with a max mounting height of 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
12'
6'
Minor Motion
Major Motion
12'
22'
Minor Motion
Major Motion
OMNI IR Range OMNI IRL Range
ordering Information
PAgE 26 hubbell-automation.com
OMNITM Low voltage Dual Technology Acoustic and PIRCEILINg MOUNT OCCUPANCY SENSORS
OMNIDIA
The OMNIDIA combines passive infrared (PIR) and acoustic (sound-activated)
technologies to turn lighting systems on and off based on occupancy. The
OMNIDIA features Hubbell Building Automation’s patented IntelliDAPT
technology, which makes all the sensor adjustments automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled
area and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• All-digital dual technology (acoustic and passive infrared [PIR]) sensor
• Non-volatile memory for sensor settings
• 450 square-foot coverage
• Optional relay and photocell control
• Optional Quick to Install (QTI) connector
• UL and cUL listed
• California Title 24 compliant
• Five-year limited warranty
1.5”
PIR Sensor
4.5”
IntelliDAPTOCCUPANCY
SENSING
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 27
QtIQtI Quick to Install
blaNk No QTI
ModEloMNI
tEcHNologYdIa Dual Technology
Acoustic & Passive Infrared
rElaY/PHotocEll oPtIoNrP Relay & Photocell
blaNk No Option
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds Automatic false-on/false-off corrections
LED Lamp Red - infrared motion Green - acoustic detection
Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24V; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux)
Coverage 450 square feet
Power Requirements 24V, 33mA (uses UVPP and MP- Series power pack- not included)
Output 24V active high-logic control signal with short circuit protection and optional dry contact (see RP options)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C)
Relative humidity (non-condensing): 0% to 95%
Construction Casing—rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors
Color-coded leads are 6” long
Dimensions 4.5”DIA, 1.5”H
Weight 5.0 oz
Color Off-white
Mounting Mounting base provided
Recommended mounting height: 8ft with a max mounting height of 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
12'
6'
Minor Motion
Major Motion
ordering Information
12'
6'
Minor Motion
Major Motion
oMNI dIa
PAgE 28 hubbell-automation.com
OMNIDT2000BP1277
OMNI-BPTM Line voltage Dual TechnologyCEILINg MOUNT OCCUPANCY SENSORS
The OMNIDTBP1277 line voltage ceiling sensor combines ultrasonic (US) and
passive infrared (PIR) technologies to turn lighting on and off based on occupancy.
This dual technology provides accurate turn-ons while virtually eliminating false-
offs.
This sensor features Hubbell Building Automation’s patented IntelliDAPT
technology, which makes all the sensor adjustments automatically. Throughout the
product’s lifespan, smart software analyzes the controlled area and makes digital
adjustments to sensitivity and timer settings. Occupancy sensors with IntelliDAPT
provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology - no manual adjustment required
• All-digital dual technology (ultrasonic [US] and passive infrared [PIR]) sensor
• Non-volatile memory for sensor settings
• 500–2,000 square-foot coverage area (depending on model)
• Self-contained power supply
• Universal voltage (100-277VAC; 50/60 Hz)
• UL and cUL listed
• California Title 24 compliant
• Five-year warranty
UltrasonicSensor
4.5”
3.4”
PIR Sensor
2.5”
Power Supply
1.95”
IntelliDAPTOCCUPANCY
SENSING
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 29
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic and passive infrared thresholds Automatic false-on/false-off corrections
LED Lamp Red—infrared motion Green—ultrasonic motionTimer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Ultrasonic (US) Output OMNIDT500: 40kHz output OMNIDT1000 and OMNIDT2000: 32kHz
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
Coverage 500 sq ft; 180° coverage 1000 sq ft: 180° coverage 2000 sq ft; 180° coverage
Power Requirements 100/277VAC; 50/60Hz Single phase only
Output 24VDC active high-logic control signal with short circuit protection
Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Magnetic Ballast 16A: 120 or 277VAC Electronic Ballast 1HP: 120VAC Motor Load 3/4HP: 277VAC Motor Load
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing—rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long
Dimensions 4.5”DIA, 3.4”H
Weight 8.2 oz (232g)
Color Off-white
Mounting Mounting using a 3 inch mud ring attached to 4 inch square electrical box Recommended MAX mounting height: 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
12'
23'
22'23'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
DT 500 Range
12'
32'
23'
22'23'
32'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
32' 23'
64'45'
12'22'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
DT 1000 Range DT 2000 Range
MODEL
oMNIdt500bP1277 Line voltage Ultrasonic and PIR Ceiling Sensor 500 Sq ft coverage
oMNIdt1000bP1277 Line voltage Ultrasonic and PIR Ceiling Sensor 1000 Sq ft coverage
oMNIdt2000bP1277 Line voltage Ultrasonic and PIR Ceiling Sensor 2000 Sq ft coverage
ordering Information
PAgE 3 0 hubbell-automation.com
OMNIUS500BP1277
OMNI-BPTM Line voltage Ultrasonic Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS
The OMNIUSBP1277 line voltage ceiling sensor uses ultrasonic (US) technology
to turn lighting on and off based on occupancy. Designed specifically for both
areas with obstructions (e.g. columns, cubicles, stalls, and filing cabinets) and
areas with long periods of minor-motion activity (e.g. typing), this sensor features
Hubbell Building Automation’s patented IntelliDAPT technology, which makes all
the sensor adjustments automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area and
makes digital adjustments to sensitivity and timer settings. Occupancy sensors with
IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• Superior all-digital ultrasonic (US) minor motion detection
• Non-volatile memory for sensor settings
• 500–2,000 square-foot coverage area (depending on model)
• Self-contained power supply
• Universal voltage (100-277VAC; 50/60 Hz)
• UL and cUL listed
• California Title 24 compliant
• Five-year warranty
UltrasonicSensor
4.5”
3.4”Power Supply
1.95”
2.5”
IntelliDAPTOCCUPANCY
SENSING
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 31
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic thresholds Automatic false-on/false-off corrections
LED Lamp Green—ultrasonic motion
Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy)
Test mode: 8 seconds (for an easy check at installation)
Ultrasonic (US) Output OMNIUS500: 40kHz output OMNIUS1000 and OMNIUS2000: 32kHz output
Coverage 500–2,000 square feet (depending on model)
Power Requirements 100/277VAC; 50/60Hz Single phase only
Output 24VDC active high-logic control signal with short circuit protection
Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Magnetic Ballast 16A: 120 or 277VAC Electronic Ballast 1HP: 120VAC Motor Load
3/4HP: 277VAC Motor Load
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C)
Relative humidity (non-condensing): 0% to 95%
Construction Casing - rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long
Dimensions 4.5”DIA, 3.4”H
Weight 8.2 oz
Color Off-white
Mounting Mounting using a 3 inch mud ring attached to 4 inch square electrical box Recommended MAX mounting height: 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
MODEL
oMNIuS500bP1277 Line voltage Ultrasonic Ceiling Sensor 500 Sq ft coverage
oMNIuS1000bP1277 Line voltage Ultrasonic Ceiling Sensor 1000 Sq ft coverage
oMNIuS2000bP1277 Line voltage Ultrasonic Ceiling Sensor 2000 Sq ft coverage
ordering Information
64'45'
23'32'
Minor Motion
Major Motion
23'
23'
Minor Motion
Major Motion
US 2000 RangeUS 1000 RangeUS 500 Range
23'
23'
32'
32'
Minor Motion
Major Motion
PAgE 32 hubbell-automation.com
OMNIIRBP1277
OMNI-BPTM Line voltage Passive Infrared Ceiling SensorCEILINg MOUNT OCCUPANCY SENSORS
The OMNIIRBP line voltage ceiling sensor uses passive infrared (PIR) technology
to turn lighting on and off based on occupancy. Designed specifically for areas
with long-range major-motion activity, this sensor features Hubbell Building
Automation’s patented IntelliDAPT technology, which makes all the sensor
adjustments automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area and
makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• All-digital passive infrared [PIR]) sensor
• Non-volatile memory for sensor settings
• 450–1,500 square-foot coverage area (depending on model)
• Self-contained power supply
• Universal voltage (100-277VAC; 50/60 Hz)
• UL and cUL listed
• California Title 24 compliant
• Five-year warranty
4.5”
3.4”
PassiveInfraredSensor
2.5”
Power Supply
1.95”
IntelliDAPTOCCUPANCY
SENSING
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 33
PassiveInfraredSensor
Power Supply
general Specifications
IntelliDAPT Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds
Automatic false-on/false-off corrections
LED lamp Red—infrared motion
Timer timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
Coverage 450–1,500 square feet (depending on model)
Power Requirements 100-277VAC; 50/60Hz Single phase only
Output 24VDC active high-logic control signal with short circuit protection
Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Magnetic Ballast 16A: 120 or 277VAC Electronic Ballast 1HP: 120VAC Motor Load
3/4HP: 277VAC Motor Load
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C)
Relative humidity (non-condensing): 0% to 95%
Construction Casing—rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors
Color-coded leads are 6” long
Dimensions 4.5”DIA, 3.4”H
Weight 8.2 oz
Color Off-white
Mounting Mounting base provided Recommended MAX mounting height: 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
MODEL
oMNIIrbP1277 Line voltage Passive Infrared Ceiling Sensor 450 Sq ft coverage
oMNIIrlbP1277 Line voltage Passive Infrared Ceiling Sensor 1500 Sq ft coverage
ordering Information
12'
6'
Minor Motion
Major Motion
12'
22'
Minor Motion
Major Motion
OMNI IR Range OMNI IRL Range
PAgE 3 4 hubbell-automation.com
OMNIDIABP1277
CEILINg MOUNT OCCUPANCY SENSORS
The OMNIDIABP line voltage ceiling sensor combines passive infrared (PIR) and
acoustic (sound-activated) technologies to turn lighting systems on and off based
on occupancy. The OMNIDIABP features Hubbell Building Automation’s patented
IntelliDAPT technology, which makes all the sensor adjustments automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area and
makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• All-digital dual technology (acoustic and passive infrared [PIR]) sensor
• Non-volatile memory for sensor settings
• 450 square-foot coverage
• Self-contained power supply
• Universal voltage (100-277VAC; 50/60 Hz)
• UL and cUL listed
• California Title 24 compliant
• Five-year warranty
4.5”
3.4”
PassiveInfraredSensor
2.5”
Power Supply
1.95”
IntelliDAPTOCCUPANCY
SENSING
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
OMNI-BPTM Line voltage Dual Technology Acoustic and Passive Infrared
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 35
Power Supply
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds
Automatic false-on/false-off corrections
LED Lamp Red—infrared motion Green- acoustic detection
Timer Timeout Automatic mode: 8–30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
Coverage 450 square feet
Power Requirements 100-277VAC; 50/60Hz Single phase only
Output 24VDC active high-logic control signal with short circuit protection
Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Magnetic Ballast 16A: 120 or 277VAC Electronic Ballast 1HP: 120VAC Motor Load
3/4HP: 277VAC Motor Load
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C)
Relative humidity (non-condensing): 0% to 95%
Construction Casing—rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors
Color-coded leads are 6” long
Dimensions 4.5”DIA, 3.4”H
Weight 8.2 oz
Color Off-white
Mounting Mounting base provided
Recommended MAX mounting height: 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
MODEL
oMNIdIabP1277 Line voltage Dual Technology Acoustic and Passive Infrared Ceiling Sensor 450 Sq ft coverage
ordering Information
12'
6'
Minor Motion
Major Motion
DIA Range
oMNIdIabP1277
PAgE 36 hubbell-automation.com
LODT
LightOWLTM Dual Technology Ultrasonic and Passive Infrared Sensor
CEILINg AND WALL MOUNT OCCUPANCY SENSORS
The LightOWLTM Dual Technology Ultrasonic and Passive Infrared Sensor combines
ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and off
based on occupancy. Designed specifically for areas where ceiling sensors are
not appropriate, this sensor features Hubbell Building Automation’s patented
IntelliDAPT technology, which makes all the sensor adjustments automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• All-digital dual technology passive infrared (PIR) and ultrasonic (US) sensor
• Non-volatile memory for sensor settings
• 1,600 square-foot coverage area
• Optional relay and photocell control
• Optional Quick-to-Install (QTI) connector
• UL and cUL listed
• California Title 24 compliant
• Five-year limited warranty
6.58”
3.63”
3.72”
PIR Sensor
UltrasonicSensor
IntelliDAPTOCCUPANCY
SENSING
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 37
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared and acoustic thresholds Automatic false-on/false-off corrections
LED Lamp Red - infrared motion Green - ultrasonic detection
Timer Timeout Automatic mode: 8–30 minutes (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
Ultrasonic (US) Output Operating frequency: 32kHz
RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux)
Factory set at 3,000 lux (disable photocell)
Coverage 1,600 square feet
Power Requirements 24VDC, 33 mA (uses UVPP and MP-Series power pack—not included)
Output 24VDC active high-logic control signal with short circuit protection and optional dry contact (see: RP Option)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing – Rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) Color-coded leads are 6” long
Dimensions 6.58”H x 3.63”W x 3.72”D
Weight 5.0 oz
Color Off-white
Mounting Mounting base provided Recommended MAX mounting height: 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
lo dt
QtIQtI Quick to Install
blank No QTI
ModEllo
tEcHNologYdt Dual Technology
Ultrasonic and Passive Infrared
rElaY / PHotocEll oPtIoN
rP Relay Photocellblank No Relay Photocell
ordering Information
20'
32'23'
40'
23'32'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
PAgE 3 8 hubbell-automation.com
LOIR
LightOWLTM Passive Infrared Sensor CEILINg AND WALL MOUNT OCCUPANCY SENSORS
The LightOWLTM Passive Infrared Sensor sensor uses passive infrared (PIR) technology
to turn lighting on and off based on occupancy. Designed specifically for areas with
long-range major-motion activity, this sensor features Hubbell Building Automation’s
patented IntelliDAPT technology, which makes all the sensor adjustments
automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• All-digital dual technology passive infrared [PIR] sensor
• Non-volatile memory for sensor settings
• 1,600 square-foot coverage area
• Optional relay and photocell control
• Optional Quick-to-Install (QTI) connector
• UL and cUL listed
• California Title 24 compliant
• Five-year limited warranty
6.58”
3.63”
3.72”
High ImpactPlastic Casing
PIR Sensor
IntelliDAPTOCCUPANCY
SENSING
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 39
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared and acoustic thresholds Automatic false-on/false-off corrections
LED Lamp Red - infrared motion
Timer Timeout Automatic mode: 8–30 minutes (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24 VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux) Factory set at 3,000 lux (disable photocell)
Coverage 1,600 square feet
Power Requirements 24VDC, 33 mA (uses UVPP and MP-Series power pack—not included)
Output 24VDC active high-logic control signal with short circuit protection and optional dry contact (see: RP Option)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing – Rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) Color-coded leads are 6” long
Dimensions 6.58”H x 3.63”W x 3.72”D
Weight 5.0 oz
Color Off-white
Mounting Mounting base provided Recommended MAX mounting height: 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
ordering Information
lo IrWV
QtIQtI Quick to Install
blank No QTI
ModEllo
tEcHNologYIrWV Passive Infrared
Wide View
IrHb Passive Infrared High Bay
rElaY / PHotocEll oPtIoN
rP Relay Photocellblank No Relay Photocell
20'
40'
IR Minor Motion IR Major Motion
PAgE 4 0 hubbell-automation.com
LODIA
LightOWLTM Dual Technology Passive Infrared and Acoustic SensorCEILINg AND WALL MOUNT OCCUPANCY SENSORS
The LightOWLTM Dual Technology Passive Infrared and Acoustic Sensorr combines
passive infrared (PIR) and acoustic (sound-activated) technologies to turn lighting
on and off based on occupancy. This sensor features Hubbell Building Automation’s
patented IntelliDAPT technology, which makes all the sensor adjustments
automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• IntelliDAPT self-adaptive technology—no manual adjustment required
• All-digital dual technology (passive infrared [PIR] and acoustic) sensor
• Non-volatile memory for sensor settings
• 1,600 square-foot coverage area
• Optional relay and photocell control
• Optional Quick-to-Install (QTI) connector
• UL and cUL listed
• California Title 24 compliant
• Five-year limited warranty6.58”
3.63”
3.72”
High ImpactPlastic Casing
PIR Sensor
IntelliDAPTOCCUPANCY
SENSING
Acoustic Located Behind Cover
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 41
QtIQtI Quick to Install
blank No QTI
ModEllo
tEcHNologYdIa Passive Infrared and
Acoustic
rElaY / PHotocEll oPtIoN
rP Relay Photocellblank No Relay Photocell
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared and acoustic thresholds Automatic false-on/false-off corrections
LED Lamp Red—infrared motion Green—acoustic detection
Timer Timeout Automatic mode: 8–30 minutes (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
RP Option Relay and photocell included Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0–1,000 lux)
Coverage 1,600 square feet
Power Requirements 24VDC, 33 mA (uses UVPP and MP-Series power pack—not included)
Output 24VDC active high-logic control signal with short circuit protection and optional dry contact (see: RP Option)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing – Rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6” long
Dimensions 6.58”H x 3.63”W x 3.72”D
Weight 5.0 oz
Color Off-white
Mounting Mounting base provided Recommended MAX mounting height: 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
ordering Information
20'
32'23'
40'
23'32'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
lo dIa
PAgE 42 hubbell-automation.com
IWSZPM
The IWSZPM is a Title 24 compliant, manual-on, passive infrared (PIR) wall switch vacancy
sensor that provides excellent energy savings and reliable motion detection. The sensor’s
low-profile casing design provides the perfect wall switch for residential areas, such as
bathrooms, garages, laundry rooms and utility rooms.
The IWSZPM’s manual-on/automatic-off operation meets Title 24 guidelines for residential
lighting, which requires a person to manually turn on lighting and the sensor to automatically
turn off lighting during vacancy.
PRODUCT fEATURES
• Zero Arc Point Switching
• No minimum load requirement
• Adjustable time delay and sensitivity
• Walk test indicator
• Dual 120/277VAC operation
• UL and cUL listed
• Title 24 compliant
• Five-year limited warranty
2.75”
4.5”
1.65”
PIR Sensor
Manual On/ Auto Off Passive Infrared Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS
OCCUPANCYSENSING
Manual On Button
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 4 3
COLORW WhiteI Ivory
MODELIWSZP
IWSZP M
CONTROLM Manual On/Auto Off
general Specifications
Timer Timeout Fully adjustable from 30 seconds to 30 minutes
Sensitivity Fully adjustable from 20% to 100%
Passive Infrared Multi-segment IR Fresnel lens
Coverage 900 sq. ft., 180 degrees
Power Requirements 120 or 277VAC, 60 Hz
Electrical Ratings 120VAC: 800W Incandescent, 1000W Fluorescent, 1/6 HP
277VAC: 1800W Fluorescent, 1/6 HP
Load Requirements No minimum load
Operating Environment Indoor use only Operating temperature: 32o to 122o F (0o to 50o C) 0% to 95% relative humidity, non-condensing
Construction Housing – high-impact, injection-molded plastic Color-coded leads are 6” long
Dimensions 4.5”H x 2.75”W x 1.625”D
Weight 2.9 oz
Color White, Ivory
Mounting Single gang NEMA style switch box, decorator style wall plate included
Certifications UL and cUL Listed
Warranty Five-year limited
ordering Information
Ground(Green)
Ground(Green)
Load Neutral
RedRed
Line
BlackBlack
16'(4.9m)
35'
(10.8m)
floor
15ϒ15ϒ
4.0'(1.2m)
35'(10.8m)
PAgE 4 4 hubbell-automation.com
IWSZP3P
The IWSZP3P is an automatic passive infrared wall switch occupancy sensor that provides
excellent energy savings as well as reliable motion detection. The sensor's low profile housing
design provides the perfect wall switch for applications including private offices, conference
rooms, break rooms, lounges and storage areas.
When a person enters the sensor’s field of view, the IWSZP3P will automatically switch “ON”
available lighting. The sensor will automatcially switch OFF lighting after a specific time
period of no occupancy.
PRODUCT fEATURES
• Zero Arc Point Switching
• No minimum load requirement
• Adjustable time delay and sensitivity
• Built-in photocell
• Walk test indicator
• Dual 120/277VAC operation
• UL and cUL listed
• Five-year limited warranty
Automatic Passive Infrared Wall Switch SensorWALL SWITCH OCCUPANCY SENSORS
OCCUPANCYSENSING
2.75”
4.5”
1.65”
PIR Sensor
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 4 5
COLORW WhiteI Ivory
MODELIWSZP
IWSZP 3P
CONTROL3P Auto On/Auto Off
general Specifications
Timer Timeout Fully adjustable from 30 seconds to 30 minutes
Sensitivity Fully adjustable from 20% to 100%
Passive Infrared Multi-segment IR Fresnel lens
Photocell Adjustable ambient light override ranges from approximately 5 foot-candles (50 lux) to 200 foot-candles (2000 lux)
Coverage 900 sq. ft., 180 degrees
Power Requirements 120 or 277VAC, 60 Hz
Electrical Ratings 120VAC: 800W Incandescent, 1000W Fluorescent, 1/6 HP
277VAC: 1800W Fluorescent, 1/6 HP
Load Requirements No minimum load
Operating environment Indoor use only Operating temperature: 32o to 122o F (0o to 50o C) 0% to 95% relative humidity, non-condensing
Construction Housing – high-impact, injection-molded plastic Color-coded leads are 6” long
Dimensions 4.5”H x 2.75”W x 1.625”D
Weight 2.9 oz
Color White, Ivory
Mounting Single gang NEMA style switch box, decorator style wall plate included
Certifications UL and cUL Listed
Warranty Five-year limited
ordering Information
Ground(Green)
Ground(Green)
Load Neutral
RedRed
Line
BlackBlack
16'(4.9m)
35'
(10.8m)
floor
15ϒ15ϒ
4.0'(1.2m)
35'(10.8m)
PAgE 4 6 hubbell-automation.com
TD300
Digital Programmable TimerPOWER PACKS AND RELAYS
With its aesthetically pleasing features, the TD300 combines style with functionality as it
provides energy saving control of incandescent, LED and fluorescent lighting, as well as
certain motor loads such as fans, hot tub heaters and circulating pumps.
The timer offers two presets for energy code compliance – two hour timing for Title 24 and
IECC and 4 hour timing for ASHRAE 90.1. A timed override allows lights and HVAC (heating,
ventilating and air conditioning) to remain on for a specified amount of time for after-hours
cleaning crews. The TD300 is easy to install and can replace any wall switch.
PRODUCT fEATURES
• Supports multiple timer intervals
• Energy code presets for Title 24, IECC, and ASHRAE 90.1
• Visual and audible turnoff warning
• 3 Way and Multiple Way Switching
• No Neutral Required
• No Load Requirement
• Dip switch control of features
• Zero Arc Point Switching
• UL and cUL listed
• Five-year limited warranty
2.75”
4.5”
1.65”
Display
Manual On Button
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 47
td300
general Specifications
Power Requirements 120/230/277VAC; 50/60Hz
Electrical Ratings 120VAC - 15A Resistive - 10A Ballast - 1200W LED Lamp Driver - 8A Tungsten - 1/4HP Motor - 360VA Pilot Duty 277VAC - 15A Resistive - 15A Resistive - 10A Ballast
Load Requirements None
Operating Environment Indoor use only Operating environment: 32° - 122°F (0°-50°C) Relative humidity (non-condensing): 0%-95%
Construction Casing – high impact injection-molded plastic Wall plate locks access to DIP switches for tamper resistance
Display Backlit LED
Dimensions 4.5”H x 2.75”W x 1.625”D
Weight 2.9 oz
Color White
Mounting Single-gang NEMA-style switch box (average switch box) Decorator wall plate sold separately
Certifications UL and cUL listed
Warranty Five-year limited
ordering Information
MODELtd300
CONTROLW White
W
PAgE 4 8 hubbell-automation.com
general Specifications
Electrical Ratings Each switch: 100mA @ 30VDC Max Each pilot LED: 18-30VDC, internal 2.2kohm, ½ Watt resistor
Configurations 1 - 4 buttons, with or without pilot LED Momentary or latching (sustained)
Operating Environment Indoor use only Operating temperature: 32° to 122°F (0° to 50°C) Relative humidity (non-condensing): 10% to 90%
Construction Housing – Rugged, high-impact, injection-molded plastic Color-coded leads
Dimensions 1.88”W x 4.25”H x 1.56”D
Weight 3.0 oz
Color White, Ivory, Light Almond, Gray
Mounting Single-gang NEMA-style switch box (average switch box) Decorator-style wall plate not included
Warranty Five-year limited
LVSM1NP LVSM1PL
SENSOR MODELlVS
lVS
SENSOR TYPEM Momentaryl Latching
PILOTPl w/ Pilot LEDSNP No Pilot
NUMBER Of BUTTONS 12
3
4
COLORWH White
IV Ivory
la Light Almond
g Gray
Hubbell Building Automation’s Low Voltage Wall Switches are designed for virtually
any indoor area. The soft contours of its architecturally pleasing design fit easily
into any décor. Switches are available in both momentary or latching versions and
feature multiple button configurations making them the perfect switch solution for
use with HBA’s Lighting Control Panels.
PRODUCT fEATURES
• Attractive, architecturally pleasing design
• Momentary or latching versions available
• 1-4 buttons with or without LED
• Mounts to standard single-gang box
• Title 24 compliant when used as part of compliant system
• Five-year limited warranty
ordering Information
Low voltage SwitchesLvS SERIES
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 49
HBA TrackerOCCUPANCY AND LIgHT LEvEL DATA LOggER
The Hubbell Building Automation (HBA) Tracker is an occupancy and light level
data logger that records room occupancy, lighting, and daylight patterns for easy
verification of potential savings by installing HBA occupancy sensors and daylight
harvesting products. The HBA Tracker’s robust reporting tools take the guesswork
out of energy audits. Data is collected once per minute to ensure accurate payback
analysis. Smart software averages similar area types for full building analysis. The
light weight sensor easily mounts via strong magnet for easy set-up. The unit
connects to a PC via included USB cord. The intuitive software includes a variety
of reports customizable to the space.
PRODUCT fEATURES
• Digital passive infrared (PIR) sensor with daylight sensor
• No wiring required
• Reusable magnetic mounting
• User replaceable 9V battery
• Easily connects to computer (PC) via USB Cable
LL-200
general Specifications
Power Requirements Powered by 9 Volt battery (included)
Passive Infrared Dual element pyrometer and spherical Fresnel lens
Daylight Sensor Range: 30 – 2500FC
Operating Environment Indoor use only; Operating temperature: 32° to 149°F (0° to 65°C)
Dimensions 4.0”DIA x 1.5”H
Weight 7 oz.
Relative humidity (non-condensing): 0% to 95%
Warranty Five-year limited
ll-200
MODEL
ll-200 Tracker and Occupancy and Light Level Data Logger
ordering Information
• PC based software included
• Windows XP / Windows 7
• User set inputs for accurate reporting
• Downloadable reports available in PDF and CVS File versions
• Five-year warranty
PAgE 50 hubbell-automation.com
UVPP
POWER PACKS AND RELAYS
Universal voltage Power Packs
PRODUCT fEATURES
2.33”
3.69”
1.36”
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
The Universal Voltage Power Pack (UVPP) is a self-contained transformer and relay
designed for low-voltage 24VDC occupancy sensors. The power pack supports
and automatically detects the line-voltage input within the 100–277VAC range.
This eliminates the need for voltage-specific power packs. The Universal Voltage
Power Pack with Manual ON/OFF control (UVPPM) provides a unique solution for
lighting applications where users require both manual ON/OFF control as well as
automatic OFF control.
Both power packs are capable of switching 20A loads and feature Zero Arc Point
Switching, minimizing relay-contact wear from high inrush loads. A single power
pack can power either 4 sensors or 3 sensors and the MPSA auxiliary relay for
multiple circuits. The power packs are plenum rated and easily mount inside or
outside of a junction box or inside a fixture.
• Universal voltage: 100–277VAC; 50/60Hz
• Automatic voltage detection
• Electrical load switching capability: maximum of 20 Amps
• Regulated 24VDC current; 150mA output
• Zero Arc Point Switching
• Plenum rated
• Mounts: inside or outside a junction box; inside a fixture
• Available with exclusive Quick-to-Install (QTI) connector
• Companion auxiliary relay device available (MPSA)
• UL and cUL listed
• Five-year limited warranty
UVPPM
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 51
ModEluVPP Universal Voltage Power Pack
uVPPQtI Universal Voltage Power Pack with QTI ConnectorMPSa Auxiliary Relay Device
uVPPM Universal Voltage Power Pack with Manual ON/OFF Control
ordering Information
general Specification
Power Requirements 100–277VAC; 50/60Hz
Output (UVPP/UPPM) 24VDC; 150mA nominal, isolated, and regulated
Relay Contact Rating 20A: 120VAC Incandescent 20A: 120 or 277VAC Ballast 1HP: 120 or 277VAC Motor Load
Plenum Rated Complies with requirements for use in a plenum area Plenum rated for external junction box mounting
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Dimensions 3.69”L x 2.33”W x 1.36”D
Weight 15 oz.
Color Black
Certifications UL and cUL listed
Warranty Five-year limited
UVPP Wiring Diagram
UVPPM Wiring Diagram
and is powered by 24VDC supplied by UVPP or UVPPM
PAgE 52 hubbell-automation.com
MP347A
POWER PACKS AND RELAYS
MP347A Power Pack
PRODUCT fEATURES
347VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
The MP347A is a self-contained transformer and relay (an ON/OFF switch
controlled by a circuit) designed for low-voltage 24VDC occupancy sensors.
This power pack is capable of switching 15A loads and feature Zero Arc Point
Switching, minimizing relay-contact wear from high inrush loads. A single power
pack can power either 3 sensors or 2 sensors and the MPSA auxiliary relay for
multiple circuits. The power packs are plenum rated and easily mount inside or
outside of a junction box or inside a fluorescent ballast cavity.
• Plenum rated
• Self-contained transformer and relay
• 347VAC, 60Hz
• Regulated 24 VDC current; 100 mA output
• Easily mounts inside or outside a junction box
• Optional Quick To Install (QTI) connector
• Companion auxiliary relay device available
• UL and cUL listed
• Five-year limited warranty
2.33”
3.69”
1.36”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 53
ModElMP347a 347VAC Power Pack
MPSa Auxiliary Relay Device
general Specifications
Power Requirements 347VAC @ 60Hz
Output 24VDC; 100 mA nominal, full-wave rectified, and filtered
Relay Contact Rating 15A: 347VAC Incandescent
15A: 347VAC Ballast
Construction High-impact UL 94-5V plastic
Plenum Rated Complies with requirements for use in a plenum area Plenum rated for external junction box mounting
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Dimensions 3.69”L x 2.33”W x 1.36”D
Weight 15 oz.
Color Black
Certifications UL and cUL listed
Warranty Five-year limited
ordering Information
PAgE 54 hubbell-automation.com
general Specifications
# Relays & Contact Type One (1) SPDT Continuous Duty Coil
Expected Relay Life 10 million cycles minimum mechanical
Gold Flash Yes
Contact Ratings 10 Amp resistive @ 120-277VAC
10 Amp resistive @ 28VDC
480 VA Pilot Duty @ 240-277VAC
480 VA Ballast @ 277VAC
600 Watt Tungsten @ 120VAC N/O
240 Watt Tungsten @ 120VAC N.C.
1/3 HP for N/O @ 120-240VAC
1/6 HP for N/O @ 120-240VAC
1/4 HP for N/O @ 277VAC
1/8 HP for N/C @ 277VAC
Coil Current 30 mA @ 10VAC 12 mA @ 10VDC
32 mA @ 12VAC 14 mA @ 12VDC
42 mA @ 24VAC 16 mA @ 24VDC
50 mA @ 30VAC 18 mA @ 30VDC
25 mA @ 120VAC
Coil Voltage Input RR1SPDTC120: 10-30VAC/DC, 120VAC; 50-60Hz
RR1SPDTC277: 10-30VAC/DC, 208-277VAC; 50-60Hz
Operating Environment -30° to 140°F
Housing Rating Plenum, NEMA 1
Wires 16”, 600V Rated
Certifications UL and cUL Listed, UL916, UL864
Warranty Five-year limited
Line voltage Auxiliary RelaysPOWER PACKS AND RELAYS
Hubbell Building Automation’s Enclosed 10 Amp SPDT Relays from Functional
Devices, Inc. provide an isolated N.O. / N.C. contact that can be used to
integrate low voltage sensors to other building automation systems. The
coil contained in these relays can be powered by more than one voltage. An
externally visible LED indicates the status of the coil of the relay.
120277
VAC
RRISPDTC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 55
ModElrr1SPdtc120 Enclosed Relay 10 Amp SPDT with 10-30VAC/DC/120VAC Coilrr1SPdtc277 Enclosed Relay 10 Amp SPDT with 10-30VAC/DC/208-277VAC Coil
ordering Information
PAgE 56 hubbell-automation.com
general Specifications
Electrical Ratings RRU120 – 2400 watts @ 120VAC 50/60 Hz, 1 HP RRU277 – 5000 watts @ 277VAC 50/60 Hz, 1.5 HP
Operating Environment Indoor use only
Dimensions 2.75”W x 4.5”L x 1.10”DWeight 3.0 oz.
Color White
Certifications UL and cUL Listed
Warranty Five years
RRU
ModElrru120 Auxiliary Relay for 120V Line Voltage Sensorsrru277 Auxiliary Relay for 277V Line Voltage Sensors
Line voltage Auxiliary RelaysPOWER PACKS AND RELAYS
PRODUCT fEATURES
ordering Information
Hubbell Building Automation’s remote relay units (RRU) are used to switch
additional lighting or other control circuits. Designed to work with line voltage
sensors, the RRU provides 20 amp switching capacity and features a Normally
Open (N/O) isolated contact.
• 120 or 277VAC models available
• 20 Amp switching capacity
• N.O. isolated contact
• UL and cUL listed
• Five-year warranty
120277
VAC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 57
HCRA
LMRA
OPE
ACAK(Shown with LightOWL
mounting arm.)
acak — acoustic ceiling Mounting kit
For ceiling and wall mount sensors used with acoustic ceiling tile. ACAK
uses integral cutting teeth for quicker installation. Color: White.
lMra — lightoWl Mud ring adaPtEr
A LightOWL goof ring for covering oversized holes. Color: White.
oPE – oMNI Protective Enclosure
The OPE is a NEMA Type 4X enclosure specifically designed for use
with HBA’s OMNIIR ceiling mount occupancy sensor. Designed to
provide protection from foreign materials and water, the enclosure is
acceptable for use in a variety of environments including applications in
the pharmaceutical and food pre-paration industries. Size: 6.5”DIA, 2”H
Color: White.
Hcra — Hard ceiling raceway adapter
For OMNI™ sensors. The HCRA is compatible with Hubbell™ and
Wiremold™ raceway. The HCRA has knockout raceway holes for quick
and clean installation. Color: White.
WgWS – Wall mount wire guard for wall switches,
6.25”H x 4.0”W x 2.25”D
WgoMNI – Ceiling mount guard for OMNI sensors,
7.0”W x 3.25”D (circular guard) Wire guards are heavy-duty coated wire
guards for sensors to protect from destructive strikes. Mounting clips are
included. Color: White.
Wglo – Wall mount wire guard for LightOWL sensors,
7.0”H x 5.75”W x 4.5”D
Ceiling and Wall Mount Occupancy Sensor AccessoriesSENSOR ACCESSORIES
WGWS
WGLO
WGOMNI
COLORacak Acoustic Ceiling Mount KitlMra LightOWL Mud Ring Adapter
Hcra Hard Ceiling Adapter
oPE Omni Protective Enclosure
WgWS Wire Guard for Wall Switches
Wglo Wire Guard for LightOWL sensors
WgoMNI Wire Guard for Omni Sensors
ordering Information
PAgE 58 hubbell-automation.com
OCCUPANCY SENSINg
The HBA WASP2 and Dimming WASP are intelligent Passive Infrared
(PIR) occupancy sensors. The occupancy sensing feature maximizes
energy savings by respectively allowing for smart switching or
dimming depending on code or application requirements.
COMPLIANCE
These specialty sensors meet the latest energy efficiency codes and
standards, including ASHRAE/IESNA 90.1 and CEC’s Title 24, and can
provide LEED (Leadership in Energy and Environmental Design) points
in categories including Sustainable Sites, Energy and Atmosphere,
Indoor Environmental Quality and Innovative Design Process.
DAYLIgHT HARvESTINg
The WASP2 and Dimming WASP can decrease energy consumption by
utilizing daylight harvesting. These sensors have an integral photocell
which allows for even more energy savings during daylight hours by
turning off lights when there is sufficient natural light.
fLEXIBILITY
The WASP2 and Dimming WASP support mounting heights from 18
to 45 feet and feature multiple outputs and mounting options for
versatility. The sensor is available in one-relay, two relay, 24VDC,
120/277/347VAC, 208/240VAC, 480VAC, and low voltage versions.
Surface and end-mount versions increase installation flexibility.
LENS OPTIONS The WASP2 and Dimming WASP lines also offers different lenses
with versatile masking options providing customized coverage for
your space. These options include: High Mount, Low Mount, 360°
Coverage, 180° Coverage, Aisle Patterns, and Half Aisle Patterns.
Occupancy Sensors for High Mount and Outdoor Use
Reduce energy consumption, maximize illumination performance, and meet optimal operating costs and lighting code standards
with HUbbell Building Automation’s WASP2 and Dimming WASP. HBA’s WASP Occupancy/ Motion sensors takes the sting out
of meeting energy codes while maximizing the energy savings available from LED lighting.
WASP sensors provide occupancy sensing and daylight harvesting for indoor and outdoor lighting applications. Depending on
the WASP2 or Dimming WASP model chosen, sensors may be configured to turn lights off or go to preset dimmed settings to
provide optimal safety and security while still providing energy savings for the user. The WASP sensors are ideal for a variety of
applications such as parking garages, area/site lighting, pathways, warehouses, storage areas, stairwells and more.
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 59
SPECIALTY OCCUPANCY SENSORS AND CONTROLLERS
End Mount WASP2 Sensor with lens option
The HBA WASP2 Indoor/Outdoor Occupancy Sensor is specifically designed
for ON/OFF control of high bay fixtures in warehouse, distribution centers and
similar facilities. The WASP2 sensor is also available for low mount applications
when using the appropriate lens. The sensor is available in end mount and surface
mount versions with either single or dual outputs.
All WASP2 sensors feature a daylight sensor which can be used to increase energy
savings by turning off lights when there is sufficient natural light detected. These
sensors also have a unique feature known as Smart Cycling™ which ensures even
lamp burn time within multi lamp flourescent fixture. Using the “Smart Cycling”
feature, the amount of time each lamp is burned is maintained and kept balanced.
PRODUCT fEATURES
• Digital Passive Infrared (PIR) sensor
• Supported mounting heights:
• High mount lens: Up to 30 ft outdoors; 45 ft indoors
• Low mount lens: Up to 16 ft indoors/outdoors
• Multiple (single and dual) output versions
• Unique Smart Cycling™ for improved lamp life
• End mount and surface mount versions
• Interchangeable high/low area detection lens options
• Low voltage and line voltage models available
• Daylight sensor for daylight harvesting applications
• Low temperature/water-tight/indoor-outdoor versions
• IP65 Rated version available
• UL and cUL listed
• Five-year limited warranty
4.0”
InterchangeableLens Options
High Impact PlasticDesign
1.5”
HBA WASP2TM Occupancy Sensor
OCCUPANCYSENSING
SMART CYCLING
RATED
WATER-DUST RESISTANT
IP65
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
DAYLIGHTHARVESTING
PAgE 6 0 hubbell-automation.com
general Specifications
Power Requirements Line Voltage sensors: 120/277/347VAC, 208/240VAC, 480VAC, 60 Hz Low Voltage sensors: 24VDC (uses UVPP or MP-Series power pack – not included)
Load Ratings 120VAC: 0-800W ballast or 0-600W tungsten, 60Hz (Line Voltage Sensors) 277VAC: 0-1200W ballast 347VAC: 0-1500W ballast 208/240VAC: 0-1200W ballast 480VAC: 0-2400W ballast ¼ HP motor load @ 120VAC, 1/6HP @ 347VAC
Output (Low Voltage Sensors) 24VDC active high-logic control signal Relay: N/O + N/C contacts; 500mA rated @ 24VDC; three wire isolated relay
User Interface (1) Twelve pin DIP switch
Timer Timeouts Primary: 8-second test mode - 4, 8, 16 and 30 minute timeouts Secondary: Can be disabled (switches off with primary timer) - 30, 60 and 90 minute timeouts
Passive Infrared Dual element pyrometer and spherical Fresnel lens designed for robust detection of a walking person. (When used with program start ballast, a 1-2 second delay from occupancy detection to lamp turn-on may be experienced.)
Daylight Sensor Range: 30 – 2500FC End mount sensor: Downward and upward looking daylight sensors (Direction selectable via DIP switch) Surface mount sensor: Downward looking daylight sensor only
Interchangeable Lens Options Lens options: (Lenses sold separately – not included with sensor module) Low Mount/High Mount Indoor/Outdoor Coverage: 360°, 180°, Aisle, Half Aisle
Operating Environment Standard version: Indoor use only; Operating temperature: 32° to 149°F (0° to 65°C); Relative humidity (non-condensing): 0% to 95% Low-temperature/Water-tight/Indoor-Outdoor version: Operating temperature: -40° to 149°F (-40° to 65°C)
Construction Sensor Module and Lens Assembly – high impact, injection-molded plastic
Dimensions 4.0”DIA, 1.5”HWeight 7 oz.
Color White, Black and Gray
Mounting End mount sensor: Mounts directly to end of fixture through extended ½” chase nipple For deeper body fixtures, an optional Extender Adapter (available separately) positions the sensor flush or below the bottom of the reflector for a full field-of-view. Surface mount sensor: Mounts directly to fixture or j-box via (2) 1.25” stainless steel screws and locking nuts
Certifications Conforms to UL STD 508, UL STD 244A Conforms to IP65 (Low-temperature/Water-tight version)
Warranty Five-year limited
Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens
Sensor Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 61
120/277/347vAC WASP2 Wiring Diagram
208/240 & 480vAC WASP2 Wiring Diagram
24v WASP2 Wiring Diagram
Example: WSP EM UNV LWO – Wasp End Mount Sensor, 120-347VAC, Low Temp/Water Tight, White
SENSOR MODEL
WSPMOUNTINg
EM End MountSM Surface Mount
INPUT vOLTAgE 24V 24VDC (Low Voltage)uNV 120/277/347VACuNV2r 120/277/347VAC (2 Outputs)208 208/240VAC480 480VAC
LOW-TEMP/ WATER TIgHTblank Standard VersionlWo Low-Temp/Water Tight/ Indoor/Outdoor
WSP
ordering Information
COLORblank WhiteBK BlackGY Gray
For available lens options and ordering information, reference the WASP2 Occupancy Sensor Lens Specification Sheet.
The Optional WSPADAPTOR2 offset adaptor can be used to improve the field of view for fixture mounted sensors
where the geometry of the fixture might otherwise interfere with the sensor’s performance. The adapter snaps into
a standard 1/2” knockout on the end of the fixture and provides several mounting position choices for the sensor.
MODELWSPadaPtor2
WSPadaPtor2
ordering Information
accessory
PAgE 62 hubbell-automation.com
End Mount Dimming WASP Sensor with lens
HBA Dimming WASPTM
OCCUPANCY SENSORS AND CONTROLLERS
The HBA Dimming WASP Indoor/Outdoor Occupancy Sensor is specifically designed
to provide 0-10V (Class 1) control of dimmable fixtures. Easy to use DIP switches allow
the user to set unoccupied and occupied dimming levels. The sensor is available
in end mount and surface mount versions in both line and low voltage options.
Interchangeable twist-on lenses eliminate need for field masking. All Dimming WASP
sensors feature a daylight sensor for ON/OFF control of fixtures when there is sufficient
natural light.
The gasketed design of the enclosure makes it impervious to dust and able to withstand
water ingress making it an ideal sensor for outdoor and wet locations including those
with temperatures as low as - 40°F to 149°F (-40°C to 65°C).
PRODUCT fEATURES
• Digital Passive Infrared (PIR) sensor
• Supported mounting heights:
• High mount lens: Up to 30 ft outdoors; 45 ft indoors
• Low mount lens: Up to16 ft indoors/outdoors
• Controls 0-10V dimmable ballasts; 0-10V LED drivers
• User controlled dimming presets
• Daylight sensor for daylight harvesting applications
• End mount and surface mount versions
• Interchangeable high/low area detection lens options
• Low voltage and line voltage models available
• Low temperature/water-tight/indoor-outdoor versions
• Available in White, Black and Gray
• IP65 Rated version available
• UL and cUL listed
• Five-year limited warranty
RATED
WATER-DUST RESISTANT
IP65
0-10VDIMMING
OCCUPANCYSENSING
DAYLIGHTHARVESTING
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
4.0”
InterchangeableLens Options
High Impact PlasticDesign
1.5”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 63
general SpecificationsPower Requirements Line Voltage sensors: 120/277/347VAC, 208/240VAC, 480VAC, 50/60Hz
Low Voltage sensors: 24VDC (uses UVPP or MP-series power pack – not included)
Load Ratings 120VAC: 0-800W ballast or 0-600W tungsten, 60Hz
(Line Voltage Sensors) 277VAC: 0-1200W ballast
347VAC: 0-1500W ballast
208/240VAC: 0-1200W ballast
480VAC: 0-2400W ballast
¼ HP motor load @ 120VAC, 1/6 HP @ 347VAC
0-10V Dimming Capable of sinking up to 30mA
Output (Low Voltage Sensors) 24VDC active high-logic control signal
Relay: N/O + N/C contacts; 500mA rated @ 24VDC
User Interface Twelve pin DIP switch for initial choice of functionality
Timer Timeouts 8-second test mode – 1, 5, 10 and 15 minute timeouts
Dimming Presets Unoccupied: 70%, 60%, 50%, 20%
Full Off Timer Delay Enabled: After 60 minutes in the Unoccupied low level state, sensor will turn lighting off
Disabled: Sensor will maintain low level setting when there is no occupancy
Passive Infrared Dual element pyrometer and spherical Fresnel lens designed for robust detection of walking person
(When used with program start ballasts, a 1-2 second delay from occupancy detection to lamp turn-on may occur)
Daylight Sensor Range: 1 to 50FC or 5 to 500FC
End mount sensor: Downward and upward facing daylight sensor (direction selectable via DIP switch)
Surface mount sensor: Downward facing daylight sensor only
Interchangeable Lens Options and Coverage Lens options: (Lenses sold separately – not included with sensor module)
Low Mount/High Mount
Indoor/Outdoor
Coverage: 360°, 180°, Aisle, Half Aisle
Operating Environment Indoor/outdoor use
Operating temperature: - 40°F to 149°F (-40°C to 65°C)
Construction Sensor Module and Lens Assembly: high-impact, injection-molded plastic
Dimensions 4.0”DIA, 1.5”H
Weight 7 oz.
Color White, Black, Gray
Mounting End mount sensor: 1/2” chase nipple
Optional extender adapter (available separately)
Surface mount sensor: Mounts directly via (2) 1.25” stainless screws and locking nuts
Certifications Conforms to UL STD 508, UL STD 244A
Conforms to IP65 ( low-temp, water tight/indoor/outdoor versions)
Warranty Five-year limited
Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens
Sensor Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens
PAgE 6 4 hubbell-automation.com
120/277/347vAC Dimming WASP Wiring Diagram
208/240 & 480vAC Dimming WASP Wiring Diagram
24v Dimming WASP Wiring Diagram
Example: WSPEMUNVLWO-D-BK – Wasp End Mount Sensor, 120-347VAC, Low Temp/Water Tight, 0-10 Dimming, Black
SENSOR MODEL
WSPMOUNTINg
EM End MountSM Surface Mount
OUTDOOR RATINg /LOW-TEMP
blank Indoor
lWo Low-Temp/Water Tight/ Indoor/Outdoor
INPUT vOLTAgE 24V 24VDC (Low Voltage)uNV 120/277/347VAC208 208/240VAC480 480VAC
DIMMINg OPTIONd 0-10V Dimming
COLORblank Whitebk BlackgY Gray
WSP d
ordering Information
For available lens options and ordering information, reference the WASP2 Occupancy Sensor Lens Specification Sheet.
The Optional WSPADAPTOR2 offset adaptor can be used to improve the field of view for fixture mounted sensors
where the geometry of the fixture might otherwise interfere with the sensor’s performance. The adapter snaps into
a standard 1/2” knockout on the end of the fixture and provides several mounting position choices for the sensor.
MODELWSPadaPtor2
WSPadaPtor2
ordering Information
accessory
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 6 5
HIgH BAY OCCUPANCY SENSORS AND CONTROLLERS
HBA WASP2TM Occupancy Sensor Lens Options
The HBA WASP2TM and Dimming WASP family of occupancy sensors offers
a variety of interchangeable lenses with versatile masking options providing
customized coverage for your space. These options include: High Mount, Low
Mount, 360° Coverage, 180° Coverage, Aisle Patterns, and Half Aisle
Patterns.
ordering Information
MODEL
WSPCOvERAgE
l360 360° Area Lensl180 180° Area LenslH Aisle LenslHa Half Aisle Lens
ENvIRONMENT
blank IndoorlWo Low-Temp/Water-Tight/Outdoor
COLORWH Whitebk BlackgY Gray
RATED
WATER-DUST RESISTANT
IP65
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
WSP
MOUNTINgblank High MountlM Low Mount
daylighting controls
PAgE 6 6
HBA introduces the Zone5 Daylight Harvesting System, which combines all three daylighting approaches and controls
tailored to the specific and demanding needs of daylight harvesting applications. Daylighting controls like HBA’s Zone5
Harvesting System impact budgets by harnessing the sun’s power to reduce energy consumption. HBA’s solutions for
daylighting control include dimming, stepped dimming, and switching systems.
Dimming systems continuously adjust light output by signaling dimming ballasts, and stepped dimming offers the
advantages of full-range dimming without the expense of dimming ballasts. Lamps are either fully turned off or partially
turned off, depending on natural light levels.
Switching systems turn lighting OFF or ON in accordance with available natural light. With a lower initial cost than dimming
systems, switching systems are most often recommended for warehouses, storage areas, atrium, lobbies and parking
facilities, where non-stationary tasks are performed.
SAvE MONEY
Cut lighting costs by up to 75%. Master Off and Row Off functions
can contribute to additional energy savings when users turn the
lights off ahead of the occupancy sensor detecting that the room
is empty.
SAvE TIME
Zone5 controls are plug-and-play, eliminating wiring labor costs.
USER-fRIENDLY PROgRAMMINg
SD Card interface provides a simple way to commission, log, verify
and update the Zone5 system. Control parameters can be copied
to the card from one Zone5 Control Module to another, email from
specifier or Zone5 PC-based template builder.
INTUITIvE, EASY-TO-USE LCD MENU
The two-line LCD interface is intuitive, easy-to-use and interactive.
The interface allows users to quickly change system settings or
monitor system diagnostics in real time.
fLEXIBILITY
All Zone5 switches can be ganged together to form custom switch
stations, maximizing flexibility in multi-use rooms. Color-coded
plug-and-play jumper cables are available to be ordered
separately, making installation effortless.
Let the Sun Be Your Guiding Light ™
PAgE 67(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
PAgE 68 hubbell-automation.com
Z5-CM
The HBA Zone5 Daylight Harvesting System features specialized controls tailored
to the specific and demanding needs of daylight harvesting applications. The HBA
Zone5 Control Module (ZCM) is the central controller of the system. It accurately
analyzes and interprets signals from Zone5 plug and play components, including
occupancy sensors, daylight sensors and low voltage switches to control both
General and A/V lighting. The ZCM supports up to 4 zones of lighting that can
be individually programmed for either daylight switching, stepped dimming or
continuous dimming. A fifth zone for standard ON/OFF control of whiteboard
lighting is also supported.
The Zone5 Control Module features an intuitive menu driven LCD user interface
to program system settings, view system/device status, and perform system
diagnostics and testing. The ZCM features an SD card interface that can be used to
save system settings and copy them to another controller, cutting down on the time
required to commission multiple systems. Each Zone5 input device is equipped
with color coded plug and play connectors which snap into the corresponding
port on the ZCM.
PRODUCT fEATURES
HBA Zone5 Control ModuleDAYLIgHT HARvESTINg CONTROLS
• Supports up to five zones of lighting control
• Daylight switching, stepped dimming or continuous dimming –
per zone for four zones
• Controls both General and A/V lighting
• Whiteboard lighting control
• Intuitive menu-driven LCD user interface
• Seamless integration with Zone5 sensors and lighting control switches
• SD card interface for saving and loading system settings
• Event logging
• Contractor-friendly, color coded plug and play installation
• UL and cUL listed
• Five-year warranty
12”
4”
15”
Lighting Control Switch Ports
Master/ RowControl
Ports
Dimming Control Ports
Occupancy Sensor Ports
Daylight Sensor Ports
DAYLIGHTHARVESTING
0-10VDIMMING
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
120277
VAC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 69
general Specifications
User Interface 2-line LCD display 4 navigational buttons SD Card interface – used for system settings, logging and firmware updates
Daylight Harvesting Options For each zone Switched Stepped dimming Full range dimming None (Not Daylight Harvested)
Color Coded Low Voltage Ports Uses standard RJ45 connectors Plenum rated, low voltage system cabling (sold separately) Blue – lighting control Yellow – master and row control Orange - 0-10V dimming White – occupancy sensor Green – daylight sensor
Demand Response Dry contact input
Electrical Each Zone (1-4) 1 relay: general lighting 1 relay: A/V lighting Dimming: 0-10V, capable of controlling up to 50 low voltage, 2-wire, 0-10V dimming ballasts Additional relay for whiteboard lighting Switched output per relay 15A tungsten (120v only,) 20A magnetic ballast, 16A electronic ballast Maximum combined output not to exceed 20A
Dimension 4”W x 12”H x 15”D
Weight 20.75 lbs
Certifications UL and cUL listed
Warranty Five-year limited
ModElZ5-cM Zone5 Control Module
Z5-cM
ordering Information
Dry Contact Terminal
LCD Display
SD Card Interface
Option Board
Terminal Block
PAgE 70 hubbell-automation.com
Z5-OS-OMDT2000RP
HBA Zone5 Ceiling and Wall Mount Occupancy SensorsDAYLIgHT HARvESTINg CONTROLS
The HBA Zone5 Ceiling Mount and Wall Mount Occupancy Sensors combine
ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and
off based on occupancy. This dual technology provides accurate turn-ons while
virtually eliminating false-offs.
These sensors feature Hubbell Building Automation’s patented IntelliDAPT®
technology, which makes all the sensor adjustments automatically. Throughout
the product’s lifespan, IntelliDAPT software analyzes the controlled area and
makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation.
PRODUCT fEATURES
• Occupancy Sensors for Zone5 Daylight Harvesting System
• IntelliDAPT self-adaptive technology – no manual adjustment required
• All-digital dual technology (ultrasonic [US] and passive infrared [PIR]) sensors
• Non-volatile memory for sensor settings
• 1,600 and 2,000 square-foot coverage area
• Form C relay with N/O + N/C outputs
• Color coded, plug and play installation
• UL and cUL listed
• Five-year limited warranty
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
DAYLIGHTHARVESTING IntelliDAPT
OCCUPANCYSENSING
6.58”
3.63”
3.72”
PIR Sensor
UltrasonicSensors
PIR Sensor
4.5”
UltrasonicSensors
1.5”
Z5-OS-LODTRP
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 71
MODELZ5-oS-oMdt2000rP Zone5 Occupancy Sensor, Ceiling Mount,
PIR and Ultrasonic, Form C Relay, 2000 Sq. Ft.
Z5-oS-lodtrP Zone5 Occupancy Sensor, Wall Mount, PIR and Ultrasonic, Form C Relay, 1600 Sq. Ft.CAT5 Cable Sold Separately
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic and passive infrared thresholds Automatic false-on/ false-off corrections
LED Lamp Red – infrared motion Green – ultrasonic motion
Timer Timeout Automatic mode: 8 – 30 min. (self adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Ultrasonic (US) Output Operating frequency: 32 kHz
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
Form C Relay Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay
Coverage Ceiling mount sensor: 2,000 square feet Wall mount sensor: 1,600 square feet
Power Requirements 24VDC, 33mA Power and 24VDC active high-logic output control signal provided through plenum rated CAT5 plug-and-play cable (ordered separately)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 5%
Construction Casing – rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UV-945VA) flame class rating, UV inhibitors
OMDT2000RP Dimensions 4.5” diameter, 1.5” height (114 mm diameter, 38mm height)
Weight 5.0 oz (142g)
LODTPRP Dimensions 6.58”H x 3.63”W x 3.72”D
Weight 5.0 oz (142g)
Color Off-white
Mounting Mounting base provided
Recommended mounting height: 8ft with a max mounting height of 12ft.
Certifications UL and cUL listed
Warranty Five-year limited
Z5-OS-OMNIDT2000RP Range Diagram Z5-OS-LODTRP Range Diagrams
ordering Information
32' 23'
64'45'
12'22'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
20'
32'23'
40'
23'32'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
20'
32'23'
40'
23'32'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
20'
32'23'
40'
23'32'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
PAgE 72 hubbell-automation.com
Z5-SW-GAV
The HBA Zone5 Low Voltage Wall Switches provide manual control of the HBA
Zone5 Daylight Harvesting System. The Zone5 system consists of two types of
switches – Lighting Control Switches and Master/Row Control Switches.
The Lighting Control Switches include a General – A/V switch that enables users
to switch between General Lighting and Audio Visual Lighting, a General – A/V
lighting dimming switch that raises and lowers light levels in both modes, a
whiteboard lighting switch that can control up to two independent whiteboard
lights, and a Study Time switch that provides uninterrupted lighting during periods
of low activity. The Master/Row Control Switches include a Master ON/OFF switch
that turns all lighting ON or OFF, and individual Row (1 – 4) ON/OFF switches that
control each row of lighting individually. All Zone5 switches are color coded and
provide CAT5 plug and play installation to the Zone5 Control Module
PRODUCT fEATURES
• Supports up to 4 zones of lighting control
• Attractive, architecturally pleasing design
• General – A/V lighting control with optional dimming control
• Whiteboard lighting control
• Master and individual row ON/OFF control
• Color-coded, plug and play installation
• All switches mount to standard single or multi-gang wall boxes
• Multi-gang wall plates available
• Five-year warranty
1.6”
4.2”
1.4”
On/OffSwitches
Fits Standard Decorator Style Wallplate (sold separately)
HBA Zone5 Low voltage Wall SwitchesDAYLIgHTINg CONTROLS
Z5-SW-ST
Z5-SW-MC
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 73
general Specifications
Power Requirements Each switch: 100mA @ 30VDC Max – Provided by Zone5 low voltage color coded plug and play cable (ordered separately) Master/Row control switches: Use with yellow cable Lighting Control Switches: Use with blue cable
Operating Environment Indoor use only Operating temperature: 32°to 122°F (0° to 50°C) Relative humidity (non-condensing): 10% to 90%
Construction Housing – Rugged, high-impact, injection-molded plastic
Dimensions 4.2”H x 1.6”E x 1.4”D
Weight 1.6 oz
Color White
Mounting Switches may be mounted individually in a single gang switch box or ganged together in a multi-gang switch box NOTE: When ganging multiple switches make sure the switches are of the same color-coded type. Decorator-style wall plates available separately
Warranty Five-year limited
ordering Information
LIgHTINg CONTROL SWITCHESAND CABLES
Z5-SW-gaV Zone5 General - A/V Mode Switch, White
Z5-SW-aVd Zone5 General - A/VDimming Switch, White
Z5-SW-St Zone5 Study Time Switch, White
Z5-SW-Wb Zone5 Whiteboard Switch, White
cat5-50f-bl Zone5 Cable for Lighting Control Switches, 50ft, Blue
cat5-100f-bl Zone5 Cable for Lighting Control Switches, 100ft, Blue
cat5-3IN-bl Zone5 Jumper Cable for Lighting Control Switches,3 inches, Blue
MASTER/ROW CONTROL SWITCHESAND CABLES
Z5-SW-Mc Zone5 Master ON/OFF Switch, White
Z5-SW-rcr1 Zone5 Row 1 Control Switch, White
Z5-SW-rcr2 Zone5 Row 2 Control Switch, White
Z5-SW-rcr3 Zone5 Row 3 Control Switch, White
Z5-SW-rcr4 Zone5 Row 4 Control Switch, White
cat5-50f-Yl Zone5 Cable for Master/Row Control Switches, 50ft, Yellow
cat5-100f-Yl Zone5 Cable for Master/Row Control Switches, 100ft, Yellow
cat5-3IN-Yl Zone5 Cable for Master/Row Control Switches, 3 inches, Yellow
WALL SWITCH PLATES
Z5-WP-1g-WH Zone5 Wall Switch Plate, Decorator Style, 1-gang, White
Z5-WP-2g-WH Zone5 Wall Switch Plate, Decorator Style, 2-gang, White
Z5-WP-3g-WH Zone5 Wall Switch Plate, Decorator Style, 3-gang, White
Z5-WP-4g-WH Zone5 Wall Switch Plate, Decorator Style, 4-gang, White
Z5-WP-5g-WH Zone5 Wall Switch Plate, Decorator Style, 5-gang, White
PAgE 74 hubbell-automation.com
general Specifications
Electrical 4 Terminal Connections - Red: +24V - Blue: Occupancy Sensor Input - Yellow: Photocell/Daylight Sensor Input - Black: Common Class 2 device Max Cable Length Supported: 300-ft from device to control module
Plenum Rated Complies with requirements for use in a plenum area
Construction Material: SABIC NORYL HS2000X
Dimensions 2.168”L x 1.093”W x 0.995”HWeight 0.8 oz
Color Gray
Mounting Adapter may be mounted using a zip-tie (not included) or with a #8 or #10 mounting screw (not included)
Warranty Five-year limited
RJ45 Adapter and CAT5 System CablesDAYLIgHTINg CONTROLS
Hubbell Building Automation’s RJ45 Adapter and CAT5 system cables are
designed to be used with HBA low voltage occupancy and daylight sensors. The
adapter replaces the Quick-To-Install™ (QTI) connectors previously used by the
wiHUBB® and Zone5™ occupancy and daylight sensors and enables devices to
connect to HBA control modules (e.g. wiHUBB Smart Pack, Zone5 Control Module,
etc) using standard CAT5 cable.
PRODUCT fEATURES
• Supports Zone5 occupancy and daylight sensors
• Plenum rated
• Five-year limited warranty
RJ45Adapter
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 75
cat5 System cables
rJ45adaPtErrJ45adaPtEr-10rJ45adaPtEr-50
RJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight SensorsRJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight Sensors - 10 PackRJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight Sensors - 50 Pack
cat5-3IN-bl
cat5-10f-bl
cat5-50f-bl
cat5-100f-bl
cat5-10f-WH
cat5-50f-WH
cat5-100f-WH
cat5-10f-gN
cat5-50f-gN
cat5-100f-gN
cat5-3IN-Yl
cat5-50f-Yl
cat5-100f-Yl
CAT5 Jumper Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 3in, Blue
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 10ft, Blue
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 50ft, Blue
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 100ft, Blue
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 10ft, White
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 50ft, White
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 100ft, White
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 10ft, Green
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 50ft, Green
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 100ft, Green
CAT5 Jumper Cable for Zone5 Master/Row Control Switches, Plenum Rated, 3in, Yellow
CAT5 Cable for Zone5 Master/Row Control Switches, 50ft, Yellow
CAT5 Cable for Zone5 Master/Row Control Switches, 100ft, Yellow
ModEl/dEScrIPtIoN
ModEl/dEScrIPtIoN
ordering Information
rJ45 adapter
SPEcIal NotES:1. When cutting CAT5 cable to specific lengths, the cable pin out is as follows:
WHITE with ORANGE STRIPEORANGEWHITE with GREEN STRIPEBLUEWHITE with BLUE STRIPEGREENWHITE with BROWN STRIPEBROWN
12345678
PIN No. WIrE color
PAgE 76 hubbell-automation.com
general Specifications
Electrical Three jumper-selectable foot-candle ranges: 3-300fc; 30-3,000fc; 60-6,000fc 24VDC Power provided through plenum rated CAT5 plug and play cable (ordered separately)
Construction Protective hard plastic cover and housing
Dimension 2”DIA, 1.2”H
Certifications UL and cUL listed
Warranty Five-year limited
Z5-DS
ModElZ5-dS Zone5 Daylight Sensor
HBA Zone5 Daylight SensorDAYLIgHT HARvESTINg CONTROLS
The HBA Zone5 Daylight Sensor provides the necessary daylight-level information
to the Zone5 Control Module (ZCM). Using a photodiode element, this sensor
continuously measures daylight levels and sends the information to the ZCM for
daylight harvesting with lighting in the General (GEN) lighting mode. The daylight
sensor supports multiple foot-candle ranges which can be used in normal, skylight
or atrium lighting applications.
PRODUCT fEATURES
• Indoor daylight sensor for Zone5 Daylight Harvesting System
• Architecturally attractive design
• Open loop operation
• Foot-candle range: 3-6,000FC
• Mounts vertically or horizontally
• Color coded, plug-and-play installation
• UL and cUL listed
• Five-Year Warranty
ordering Information
DAYLIGHTHARVESTING
Z5-dS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 77
ZoNE5 SYStEM arcHItEcturE
PAgE 78 hubbell-automation.com
DLC7
Continuous Dimming ControlDAYLIgHTINg CONTROLS
Hubbell Building Automation’s DLC7 is the ideal system for providing continuous
closed loop dimming control for 2-wire 0 -10V dimming ballasts and LED dimmable
drivers based on natural daylight. This control maintains constant, undisturbed,
light levels during peak use times. Through continuous monitoring of ambient
light levels, the DLC7 dims the associated lighting fixtures to a user’s predefined
foot-candle setting. The DLC7 dimming photocell provides precise control of the
actual amount of lighting on the work surface (e.g. desktop, floor) within its field
of view. Measured light levels are converted into a linear, proportional, analog
voltage that controls the ballast or LED driver dimming range. This achieves
maximum energy savings by efficiently blending natural and artificial light to
maintain a comfortable visual environment.
The sensor head adjustment sets the maximum output of the controlled ballast
or LED driver. The sensor also provides a short and long delay. The short delay
provides faster sensor response. The long delay slows the sensor response and
maintains a more stable signal to the ballast or LED driver, accomodating for brief
changes in light due to passing clouds.
PRODUCT fEATURES
• Controls 2-wire 0 -10V dimming ballasts and LED drivers
• Light-sensitivity range of 0–500FC
• Selectable 3- or 8-second dimming rate
• Multiple calibration options
• Low-profile design
• Five-year limited warranty
0-10VDIMMING
2.00”
1.23”
DAYLIGHTHARVESTING
Commisioning Port
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 79
MODELdlc7 Continuous Dimming Control
general Specifications
Accuracy +/-1% @ 70°F (21°C); Derated to +/-5% when above 120°F or below 50°F (18° to 49°C)
Operating Environment -13°F to 140°F (-11°C to 60°C)
Sensitivity Ranges 0–500FC
Adjustment Range 10–140FC
Input Voltage 10V (supplied by ballast or LED driver)
Current Sink up to 25mA
Output Voltage 1V (light) - 10 V (dark)
Wire Leads 22 gauge Gray and violet to the Advance ballast White-green 2-wire loop cut for 10-second delay. Leave intact for 20-second delay to ballast
Sensor Type Blue enhanced photodiode
Dimensions Base diameter: 2.00” Sensor diameter: 1.29” Height: 1.23”Weight 1.2 oz.
Mounting Mounting hole: 3/8” Mounting medium: 3M™ double adhesive tape
Construction Sensor housing meets flame-retardant requirements of UL standard 94HB
Certifications ETL/UL 916
Warranty Five-year limited
ordering Information
dlc7
PAgE 8 0 hubbell-automation.com
DLCPCO
DLCPCA
DLCPCI
Daylighting Control Photocell SensorsDAYLIgHTINg CONTROLS
Hubbell Building Automation’s daylighting control photocell sensors (DLCPCI,
DLCPCO, DLCPCA and DLCPCS) provide indoor, outdoor, or skylight control of
lighting circuits based on natural daylight. The DLCPC sensors and controller are
able to provide coverage for any application. The DLCPC sensors are used in
different locations in and around a building. Indoor sensors are used in offices and
classrooms. Outdoor sensors detect light for sign and site illumination control.
Atrium sensors measure light in lobbies. Skylight sensors read the ambient light
available in warehouse skylights.
Each sensor has a different range and focus of the light being measured. The
sensor sensitivity is adjustable. Model measurements ranges include 750, 2,500
or 7,500FC. The indoor sensor has a flat Frensal lens that looks downward in a
60-degree cone of referance to measure acutal light on the work surface. The
outdoor sensor is enclosed in a weatherproof housing with a visor for shading and
lens protection. The Atrium and Skylight sensors both use diffusing dome lenses
to provide a 180-degree angle of photodiode reposnse.
PRODUCT fEATURES
• Multiple sensor options available
• Interfaces with Energy Management Systems
• Five-year limited warranty
DAYLIGHTHARVESTING
DLCPCS
Correct orientation shown
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
2.00”
2.00”
2.50”
1.75”
2.75”
1.75”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 81
MODELdlcPcI Indoor Photocell Sensor, 50 - 750FCdlcPco Outdoor Photocell Sensor, 50 - 750FCdlcPca Atrium Photocell Sensor, 200 - 2500FCdlcPcS Skylight Photocell Sensor, 1000 - 7500FC
ordering Information
general Specifications
Accuracy +/-1% at 70°F (21°C Derated to +/-5% at 120°F or at) F (-18°C to 49°C)
Operating Temperature 13°F to 140°F (-11°C to 60°C)
Sensor Type Blue-enhanced photo diode
Sensor Ranges Housing Minimum Adjustable Maximum DLCPCI Indoor 50-750FC DLCPCO Outdoor 50-750FC DLCPCA Atrium 200-2,500FC DLCPCS Skylight 1,000-7,500FC
Input Voltage 24VDC
Output Voltage 10V full output
Output Offset 0VDC or 1VDC - total darkness
Wiring Three conductors 18-gauge standard cable Red: Pos. DC input Black: DC common Yellow: Output to EMS
Certifications ETL/UL 916 Listed Title 24 Listed RoHS compliant
Warranty Five-year limited
PAgE 82 hubbell-automation.com
DLCPCC
Photocell ControllerDAYLIgHTINg CONTROLS
PRODUCT fEATURES
• Adjustable on/off set points
• Dual power unit input: 24VAC or 24VDC
• Flexible control options
• Input time delay
• Two set points available for separate on and off levels
• Five-year limited warranty
Hubbell Building Automation’s DLCPCC is the ideal system for providing indoor,
outdoor, or skylight control of lighting circuits based on daylight. The DLCPCC
lighting controller automatically switches a dry contact in response to changes in
natural light levels. The DLCPCC provides a maintained single pole, double throw
“Form C” relay output to drive electrically-held contactors or relays, or inputs
to Building Automation Systems. The low voltage controller requires a remotely
mounted photoconductive (PC) sensor (sold separately).
The DLCPCC continuously compares the remote sensor’s signal against the LOW
and HIGH light level set points. When the sensor detects decreasing light levels
that corresponds with the LOW set point, the lights are switched ON. Conversely, as
light levels increase and the sensor’s signal matches the HIGH set point, the lights
are switched OFF. The LOW and HIGH set points are separated by a “deadband.”
This prevents the DLCPCC from switching light levels between set points, thus
eliminating nuisance or intermittent changes.
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
DAYLIGHTHARVESTING
4.75”
1.5”
2.5”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 83
MODEL
dlcPcc Photocell Controller
general Specifications
Accuracy +/- 1 percent at 70°F (21°C) Derated +/- 5 percent above 120°F or below 0°F (49°F / -18°C)
Sensor Type CD S Photoconductive 2 wire
Power Requirements 24VAC or 24VDC standard
Dead Band Adjustable: 5-95%
Indicators Red High and Low LEDs
Input Delay Standard 30-second sensor (removable for adjustment)
Control Inputs Photoconductive Sensor Calibration / Simulator (for optional DLCSIMM)
Output Standard form C SPDT relay 10A resistive
Operating environment Operating Temp: -13°F to 140°F (-11°C to 60°C) Indoor use only
Construction Sensor is mounted on a wall switch faceplate
Dimensions 4.75”h x 2.5”w x 1.5”D
Color White
Warranty Five-year limited
ordering Information
dlcPcc
PAgE 84 hubbell-automation.com
Luxstat Dimming Control ModuleDAYLIgHTINg CONTROLS
Using a unique Open Loop control algorithm, the Luxstat Dimming Control Module
by Servodan provides continuous dimming daylight harvesting control to an area. The
lights dim when there is enough daylight, and they brighten when there is not enough
daylight. Instead of measuring the light already inside an area, this module measures
the amount of daylight entering an area.
During installation, lighting levels (without artificial lighting) are measured at task
height for each of the 3 zones. The controller adjusts each of the zones independently
to maintain the desired lighting levels within each space while taking advantage of
available natural daylight. The Luxstat Dimming Control Module is part of a daylight
harvesting system that includes the Luxstat Light Sensor and the Luxstat Power Pack.
This control module can work with occupancy sensors and manual wall switches to
provide a diverse lighting solution for classrooms and meeting rooms.
PRODUCT fEATURES
• Open Loop continuous dimming daylight harvesting control
• Pushbutton programming
• Automated setup
• LCD display provides “Real Time” light-level readings
• 5 pre-programmed applications
• Continuous dimming control—choose from 1, 2, or 3 zones
• Individual adjustment for each channel of control
• Compatible with 2-wire 0 - 10V dimming ballast or LED drivers
• Integration with occupancy sensors and manual override controls
• DIN rail mounting
• Title 24 compliant
• UL and cUL listed
• Five-year limited warranty
LUXSTATDCM
DAYLIGHTHARVESTING
0-10VDIMMING
3.54”
2.75”
2.36”
Display
Navigation Buttons
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 85
luXStatdcM Luxstat Dimming Control Module, 24V DC
ModEl
ordering Information
general Specifications
Electrical Class 2
Supply Voltage LUXSTATPP Power Pack: 24 VDC
Operation Control output voltage to ballasts: 0–10V
Programmable Features Minimum output setting: 0–4V Maximum output setting: 6–10V Fade and ramp rate: 5–60 seconds Cut off delay: 0–20 minutes or infinity Maximum sink: 50mA per channel Maximum source: 3mA per channel Maximum ballasts: 50 per channel
Dimensions 3.54”H x 2.75”W x 2.36”D
Certifications UL and cUL listed
Warranty Five-year limited
luXStatdcM
PAgE 86 hubbell-automation.com
LUXSTATOCM
Luxstat ON/Off Control Module
DAYLIgHTINg CONTROLS
PRODUCT fEATURES
• Open Loop ON/OFF daylight harvesting control
• Pushbutton programming with automated setup
• LCD display provides “Real Time” light level readings
• 5 pre-programmed applications—fit most applications without complicated setup
• Multilevel switching—choose from 1, 2, or 3 zones
• Individual adjustment for each channel of control
• Adjustable ON and OFF delays
• Integration with occupancy sensors and manual override controls
• DIN rail mounting
• Title 24 compliant
• UL and cUL listed
• Five-year limited warranty
DAYLIGHTHARVESTING
3.54”
2.75”
2.36”
Display
Navigation Buttons
The Luxstat ON/OFF Control Module by Servodan provides multilevel ON/OFF
daylight harvesting control by using a unique Open Loop control algorithm. The
lights turn off when there is enough daylight, and they turn on when there is not
enough daylight. Instead of measuring the light already inside of an area, this
module measures the amount of daylight entering an area. During installation,
lighting levels (without artificial lighting) are measured at task height for each of
the 3 zones. When daylight is adequate, the controller switches lighting off. When
daylight is below the desired level, the control module switches lighting back on.
The ON and OFF delays for each channel are individually adjustable.
The Luxstat ON/OFF Control Module is part of a daylight harvesting system that
includes the Luxstat Light Sensor and the Luxstat Power Pack. The control module
can work with occupancy sensors and manual wall switches to provide a diverse
lighting solution for classrooms and meeting rooms.
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 87
luXStatocM Luxstat On/Off Control Module, 24V DC
ModEl
ordering Information
general Specifications
Electrical Class 2
Supply Voltage LUXSTATPP Power Pack: 24VDC
Programmable Features Photocell range: 3–6000FC Set point range: 5–60 foot-candles Programmable deadband: 10%–80% Adjustable ON delay: 5–60 seconds Adjustable OFF delay: 3–60 minutes Load shed set point: 5–60FC
Dimensions 3.5”H x 2.8”W x 2.5”D
Certifications UL and cUL listed
Warranty Five-year limited
luXStatocM
PAgE 8 8 hubbell-automation.com
LUXSTATPP
Luxstat Power PackDAYLIgHTINg CONTROLS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
120277
VAC
PRODUCT fEATURES
• Provide power to operate Luxstat daylight harvesting control modules
• 3 individually controlled relays for ON/OFF control
• 120/230/277VAC transformer
• Quick connect to Luxstat daylight harvesting control modules
• DIN rail mounting
• UL listed
• California Title 24 Compliant
• Five-year limited warranty
The Luxstat Power Pack by Servodan powers the Luxstat ON/OFF Control Module
and the Luxstat Dimming Control Module. It supplies low-voltage power to the
control modules via a quick connect cable and has 3 normally open relays (ON/
OFF switches controlled by a circuit) to switch line voltage in response to signals
from the connected controller.
Additionally, the power pack has an automatically resetting fuse. If the current
drawn from the power pack exceeds the specifications, the +24VDC output and
the LED will turn off. When the problem and the primary power are removed, the
power pack will restore power.
3.57”
2.76”
2.36”
24VDC
LOW
VOLTAGE
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 89
ordering Information
MODELluXStatPP Luxstat Power Pack for
Luxstat Control Modules
General Specifications
Voltage 120/277VAC, 50/60 Hz—single phase
Secondary Power 1,000 mA @ 24VDC
Relays 3 normally open relays (620 A @ 120 or 277VAC)
Dimensions 2.76”W x 3.57”H x 2.36”D
Certifications UL and cUL listed
Warranty Five-year limited
luXStatPP
PAgE 9 0 hubbell-automation.com
LUXSTATOCM1Z
Luxstat Single Zone On/Off Control ModuleDAYLIgHTINg CONTROLS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
120277
VAC
PRODUCT fEATURES
• Open Loop ON/OFF Daylight Harvesting control
• Pushbutton programming
• LCD display provides Real Time light level readings
• 3 to 3000FC Range
• Single-zone switching
• Adjustable OFF delay
• Integration with occupancy sensors and manual override controls
• DIN rail mounting
• UL listed
• California Title 24 Compliant
• Five-year limited warranty
DAYLIGHTHARVESTING
The Luxstat Single Zone ON/OFF Control Module by Servodan provides single
zone ON/OFF Daylight Harvesting control utilizing a unique Open Loop control
algorithm. Instead of measuring the light inside of the space the control module
measures the amount of daylight entering the space. During installation, lighting
levels, without artificial lighting, are measured at task height for the zone to be
controlled. The level is then input into the control module. The photocell measures
daylight and transmits this data to the Luxstat Single Zone ON/OFF Control
Module. When daylight is adequate, the controller switches lights off. When
daylight diminishes below the desired set point, the control module switches
lighting back on. The OFF delay for the zone is adjustable.
The Luxstat Single Zone ON/OFF Control Module is part of a Daylight Harvesting
system that includes the Luxstat Light Sensor. The control module can also
integrate with occupancy sensors and manual control wall switches .
3.54”
2.81”
2.5”
Display
Navigation Buttons
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 91
ordering Information
MODELluXStatocM1Z120 Luxstat Single Zone On/Off Control Module
120VAC luXStatocM1Z277 Luxstat Single Zone On/Off Control Module
277VAC
General Specifications
Electrical (Input) LUXSTATOCMIZ120: 120VAC LUXSTATOCMIZ277: 277VAC Load: Max 40mA Power Consumption: Approximately 2W Signal from Light Sensor: 0-10V
Electrical (Output) Relay Contact: N/O, 10mA Load: Incandescent Lamps – 1200W Fluorescent – 620VA Halogen Incandescent – 500W Secondary Voltage: 24VDC
Performance FC Range: 0.3 – 30FC; 3-300FC; 30-3000FC Setting Range: 0.3-27FC; 3-270FC; 30-2700FC OFF Delay: 0-60 minutes
Operating Environment Temperature range: 41°F to 122°F (+5°C to +50°C)
Dimensions 3.54”H x 2.81.”W x 2.5”D
Mounting DIN Rail
Accessories IndoorLight Sensor – LUXSTATLS Outdoor Light Sensor - LUXSTATLSO LUXSTAT 1-Button Momentary Switch - LUXSTATSW1WH or LUXSTATSW1IV
Certifications UL and CE Listed
Warranty Five-year limited
PAgE 92 hubbell-automation.com
LUXSTATDNCM
Luxstat Day/Night Control Module with ClockDAYLIgHTINg CONTROLS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
120277
VAC
PRODUCT fEATURES
• Open Loop ON/OFF daylight harvesting control
• Integrated clock for night blocking
• Pushbutton programming
• DIN rail mounting
• UL listed
• California Title 24 Compliant
• Five-year limited warranty
DAYLIGHTHARVESTING
The Luxstat Day/Night Control Module by Servodan provides single zone ON/OFF
daylight harvesting control utilizing a unique Open Loop control algorithm. In the
evening, when daylight diminishes below the desired ON set point, the control
module switches lighting on. In the morning, when daylight reaches the desired
OFF set point, lighting is switched off.
The controller’s integrated clock function switches off lighting completely during
a pre-defined period. Switching off lighting during the late evening/early morning
means more energy savings. The controller also features pushbutton programming
for easy system setup and configuration.
3.54”
1.37”
2.36”
Display
Navigation Buttons
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 93
ordering Information
MODELluXStatdNcM120 Luxstat Day/Night Control Module with Clock,
120VAC, DIN Rail Mount
luXStatdNcM277 Luxstat Day/Night Control Module with Clock, 277VAC, DIN Rail Mount
36-080 Minilux Control
Test
Mode Set +
AppI n Out
Luxrange
Luxon
Offdelay Test
Set -
B12 3
23
B
D
45
D1
CC 1 23
L
N
21 4 21 3
LuxPIR
NP
N 0-10V
general Specifications
Electrical (Input) LUXSTATDNCM120: 120VAC LUXSTATDNCM277: 277VAC Load: Max 40mA Power Consumption: Approximately 2W Signal from Light Sensor: 0-10V
Electrical (Output) Relay Contact: N/O, m10A Load: Incandescent Lamps – 1200W Fluorescent – 620VA Halogen Incandescent – 500W Secondary Voltage: 24VDC
Performance Fc Range: 0.3 – 30FC Adjustment range for Fc on: 1 – 30FC
Adjustment Range for FC off: Minimum: 10% of Fc on, but not less than 0.3FC Maximum: 70% of Fc on but not more than 9FC Tolerance of Fc range: +-10% Backup for clock: > 2 hours, when the unit has been connected at least 5 minutes
Operating Environment Temperature range: 41°F to 122°F (+5°C to +50°C)
Dimensions 3.54”H x 1.37”W x 2.36”D
Mounting DIN Rail
Accessories Outdoor Light Sensor – LUXSTATLSO Indoor Light Sensor - LUXSTATLS
Certifications UL and CE Listed
Warranty Five-year limited
PAgE 94 hubbell-automation.com
LUXSTATLS
Luxstat Light SensorDAYLIgHTINg CONTROLS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
The Luxstat Light Sensor by Servodan provides the necessary daylight-level
information to the Luxstat daylight harvesting control modules. Using a
photodiode element, this sensor continuously measures daylight levels and sends
the information to the selected Luxstat daylight harvesting control module. In
order to operate as a true Open Loop controller, the sensor must be positioned
to see only daylight (no artificial light). You select the applicable foot-candle range
by using a jumper beneath the front cover.
PRODUCT fEATURES
• Daylight sensor for Luxstat Daylight Harvesting System
• Architecturally attractive design
• Indoor and outdoor versions
• Open loop operation
• Foot-candle range: 3-6,000FC
• Mounts vertically or horizontally
• UL and cUL listed
• California Title 24 Compliant
• Five-year limited warranty
DAYLIGHTHARVESTING
2”
1.2”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 95
MODELluXStatlS Luxstat Light Sensor - Indoor
luXStatlSo Luxstat Light Sensor - Outdoor
ordering Information
general Specifications
Electrical Four jumper-selectable foot-candle ranges: .03-30FC; 3-300FC; 30-3,000FC; 60-6,000FC 24VDC Low Voltage Class 2 Device 3-conductor 22 AWG twisted cable—equal to Belden 8443
Construction Protective hard plastic cover and housing
Dimension 2” diameter x 1.2” height (50.8 diameter x 30.5mm height)
Certifications UL and cUL listed
Warranty Five-year limited
78-050
A
B
17 23 45 68 91 01 11 2
17 23 45 68 91 01 11 2
A
B
21 3
Lux0-10V
Luxstat Control
Light sensor
Luxstat Control DIM
45º
30º
30º
PAgE 96 hubbell-automation.com
LUXSTATSW4WH
Hubbell Building Automation’s Low Voltage Wall Switches for Luxstat provides
manual control of the Luxstat Daylight Harvesting Control Modules. The 4-button
switch allows occupants to override the automatic daylight control and provides
manual ON/OFF and dimming control. The 2-Button Auto/Manual Wall Switch
allows occupants to override the automatic daylight control and provides manual
ON/OFF control. The 2-Button Dimming Wall Switch provides manual dimming
control. The 1-Button Momentary Wall Switch provides manual ON/OFF control.
PRODUCT fEATURES
• Attractive, architecturally pleasing design
• Multiple button configurations available
• Manual ON/OFF control
• Low voltage operation; Class 2 device
• Mounts to standard single-gang box
• Five-year warranty
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
1.6”
4.2”
1.4”
DimmingSwitches
Fits Standard Decorator Style Wallplate (sold separately)
Low voltage Wall Switches for LuxstatDAYLIgHTINg CONTROLS
LUXSTAT2DIM
ManualSwitch
AutoSwitch
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 97
general Specifications
Power Requirements Each switch: 100mA @ 30VDC Max Each pilot LED: 18-30VDC, internal 2.2kohm, ½ Watt resistor
Operating Environment Indoor use only Operating temperature: 32°to 122°F (0° to 50°C) Relative humidity (non-condensing): 10% to 90%
Construction Housing – Rugged, high-impact, injection-molded plastic
Dimensions 4.2”H x 1.6” W x 1.4” D
Weight 1.6 oz
Color White, IvoryMounting Single gang NEMA-style switch box Decorator-style wall plates available separately
Warranty Five-year limited
ordering Information
COLORWH WhiteIV Ivory
MODELluXStatSW4
luXStatSW2 autoluXStatSW2 dIM
luXStat SW1
PAgE 98 hubbell-automation.com
lighting control Panels
PAgE 98
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 9 9
Interior and exterior lighting can account for 40% of all energy costs on a property.
Recover as much as 25-50% of that cost in the first six months of implementing HBA’s
LX networked lighting control system. LX is a network of expandable and modular relay
panels, sensors and switches. Take control of your lighting near or far with its intuitive
programming interface, touchscreen tablet and remote access via LAN and Internet.
Connect to any point on the topology-free, polarity-insensitive, 2-wire LON communication network with our LonMark® certified
architecture. Install sensors and switches “plug-and-play” for endless possibilities in control and savings.
SAVE TIME
LX control panels are simple to install and use. The LX series
utilizes LonMark® certified architecture so sensors and
switches can be installed plug-and-play by connecting to
any point on the topology-free, polarity-insensitive 2-wire
communication network.
FLEXIBILITY
The LX networked lighting controls use a hand-held
touchscreen GUI interface that keeps up with the constant
progression of lighting control systems.
IMPROVE THE EASE OF LIGHTING CONTROL
• Unique hand-held touchscreen GUI
• Robust and reliable 20Amp
mechanically-latching relays
• Multiple size enclosures available
(4, 8, 16, 32, and 48 relays)
• Powered, topology-free, polarity-insensitive,
2-wire communication
• LonMark® certified
• Seamless integration with major building
protocols, such as LON, BACnet® and
MODBUS®
• Feature-rich scheduling functions
• 365-day time clock
• Automatic daylight savings time and leap year
compensation
• Built-in astronomical time clock for sunrise and
sunset programming
Seamless Networked Lighting
(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 9 9
PAgE 10 0 hubbell-automation.com
LX Lighting Control PanelsLX SERIES NETWORKED LIgHTINg CONTROLS
The LX Series Network Lighting Control Panels are the core of the LX system
providing programmable switching control of the project’s lighting circuits.
Multiple panels are equal peers on the network and can have relays controlled
individually or in groups by any input, schedule, preset or Building Automation
System.
PRODUCT fEATURES
• Unique hand-held touchscreen graphical user interface (GUI) (Order Separately)
• Robust and reliable 20 Amp mechanically latching relays
• Multiple size enclosures available (4, 8, 16, 32, and 48 relays)
• Topology-free, polarity-insensitive, 2-wire communication
• LonMark ® certified
• Feature-rich scheduling functions
• 365-day time clock
• Automatic Daylight Savings Time and leap year compensation
• Built-in astronomical time clock for sunrise and sunset programming
• Five-year limited warranty
NETWORK
120347VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 101
MODELlXIN LX Relay Panel Interiors
lXIN
RELAY CAPACITY48163248
NUMBER Of SINgLE POLE RELAYS00-48
(Depending on Size)
NUMBER Of DOUBLE POLE RELAYS00-24
(Depending on Size)
*NOTE: Number of poles cannot exceed the relay panel size. Example: A LX Series Relay Panel is comprised of 2 separate part numbers, 1 for the interior and 1 for the enclosure — they must be the same size.
Example:32 Relay Interior with 4 Single Pole Relays and 4 Double Pole Relays: LXIN32 04 04Enclosure to complete specifications - LXEN325
MODELlXEN LX Relay Panel
Enclosure
lXEN
SIZE48163248
TRIMf FlushS Surface
general Specifications
Programming and Configuration Programmable via the LX Touch Tablet or LX JENEsys™
Physical NEMA 1 enclosure, surface or recessed Pre-drilled mounting holes for easy mounting either to the uni-strut framing or directly to wall, KO’s provided on top and bottom Removable interior assembly 4, 8, 16, 32, and 48 relay enclosures with hinged locking door
Electrical 120/277/347VAC multi-tap transformer 120, 277, and 347VAC 20 Amp Single Pole Relays
208, 240, and 480VAC 20 Amp Double Pole Relays
Operating Environment Location: interior space Operating temperature: 0° to 50°C (32° to 112°F) Relative humidity (non-condensing): 10%–90%
Certifications UL and cUL listed (UL 508, 916 and UL 924) LonMark 3.3 Certified
Warranty Five-year limited
ordering Information
PAgE 102 hubbell-automation.com
LXRL1
LXRL2
LX RelaysLX SERIES NETWORKED LIgHTINg CONTROLS
480VAC
120347VAC
PRODUCT fEATURESNETWORK
0.9”
3.75”
2.3”
1.9”
3.75”
The heart of any lighting control system is the relay. With today’s new high
in-rush lighting loads and demanding inductive switching requirements,
only the most robust relays are capable of keeping up with the demands
placed upon them.
LX Relays are recognized as the industry’s most robust and reliable relays
on the market today. With a 2,000 Amp in-rush current and 14,000 Amp
short circuit current, our relays are built to last.
• Robust and reliable mechanically latching relay
• Suitable for high in-rush loads up to 2,000 Amps
• 14,000 Amp SCCR @277VAC
• 120, 277 & 347VAC Single Pole
• 208, 240 & 480VAC Double Pole
• Built-in manual override lever & ON/OFF indicator
• UL Listed
• Five-year limited warranty
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 103
ordering Information
lXrl1 LX Relay, Single Pole, 120/277/347VAC
lXrl2 LX Relay, Double Pole, 120/277/347VAC
general Specifications
Physical Mechanically-held latching relay Mounts in LX panel to supplied mounting bracket Built-in manual override lever & ON/OFF indicator on each relay Tool-less insertion and removal of relay
Electrical UL Endurance Test 60k Operations at 20A, 300VAC 14,000 Amp short circuit current @277VAC* 20 Amp Single Pole – 120, 277 & 347VAC 20 Amp Double Pole – 208, 240 & 480VAC ½HP@110-125VAC, 1 ½HP@220-277VAC
Operating Environment Location: Interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative Humidity: 10% to 90% non-condensing
Dimensions Single Pole: 3.75”L x 0.9”W x 2.3”D Double Pole: 3.75”L x 1.9”W x 2.3”D
Certifications UL & cUL Listed (UL 508)
Warranty Five-year limited
*Applicable to Single Pole Relay only.
PAgE 10 4 hubbell-automation.com
NOTE: Touch Screen Graphic User Interface(GUI) not included. Order Separately.
LXBC Breaker Control Panels LX SERIES NETWORKED LIgHTINg CONTROLS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
PRODUCT fEATURESNETWORK
120277
VAC
480VAC
57”
20”
5.75”
Touchscreen Interface
Breakers/ Breaker Relays
The LXBC Breaker Control Panel provides the opportunity to combine controlled
and non-controlled loads into a single, fully functional branch circuit panel board.
The LXBC integrates seamlessly into the LX Lighting Control Network and can be
used as a stand-alone LX control panel or combined in a network with other LX
and/or LXBC panels.
• Unique, hand-held touch screen graphical user interface (GUI) (Order Separately)
• Robust and reliable 20 and 30 Amp mechanically latching circuit breaker/relays
• Multiple size enclosures available (12, 18, 30, and 42 spaces)
• 100 AMP, 225 AMP or 400 AMP bussing Main Lugs or Main Circuit Breaker
• 120/208V, 3PH, 4W or 277/480V, 3PH, 4W
• Topology-free, polarity-insensitive, 2-wire communication
• LonMark ® certified
• Feature-rich scheduling functions
• 365-day time clock
• Automatic Daylight Savings Time and leap year compensation
• Built-in astronomical time clock for sunrise and sunset programming
• Five-year warranty
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 10 5
MODELlXbc LX Breaker
Control Panel
SYSTEM vOLTAgE1 120/208, 3
Phase, 4 Wire2 277/480, 3
Phase, 4 Wire
MAINSIl 100 Amp
Main Lugs Only
Ic 100 Amp Main Circuit Breaker
2l 225 Amp Main Lugs Only
2c 225 Amp Main Circuit Breaker
4l 400 Amp Main Lugs Only
4c 400 Amp Main Circuit Breaker
fEEDb Bottom Feed
Only (Top Feed is not available)
RELAY SPACES12 12 Spaces18 18 Spaces30 30 Spaces42 42 SpacesNOTE: 42 space is available in 225A and 400A main size only.
COMMUNICATIONSH HBA LX-Lon
ENCLOSURE1S NEMA 1
Surface1f NEMA 1
Flush3S NEMA 3
Surface3f NEMA 3
Flush
lXbc b H
400 amp57"
69"
20"
20"
5.75"
5.75"
D W
H
general Specifications
Programming and Configuration Programmable via the LX Touch Tablet
Physical NEMA 1 enclosure, surface or flush mount NEMA 3 enclosure, surface or flush mount KOs provided on top and bottom 12, 18, 30, and 42 space enclosures with hinged locking door
Electrical 120VAC input control voltage at terminal block 15 Amp, 20 Amp and 30 Amp 1-pole and 2-pole Circuit Breaker/Relays Non-Control circuit breakers 15A – 100A, 1,2, and 3-pole 100 AMP, 225 AMP or 400 AMP Lugs Only or Main Circuit Breaker, CU/AL Lugs Bottom Feed only, Top Feed is not available. 120/208V, 3PH, 4W or 277/480V, 3PH, 4W system voltage, 14KAIC @277/480V, 65KAIC Series Rated with main CB
Operating Environment for Location: interior spaceNEMA 1 Rated Equipment Operating temperature: 0° to 50° C (32° to 112° F) Relative humidity (non-condensing): 10% to 90%
Certifications UL listed (UL 916) LonMark 3.3 Certified
Warranty Five-year limited
Dimensions
Example: Panel, Controlled Circuit Breaker/Relays, and Non-Controlled Breakers must be
ordered as separate line items:
1 ea LXBC11CB30H1S
100A Main Circuit Breaker, 120/208V, 3 Phase, 4 wire,
30 Space, NEMA 1 Surface, Bottom Feed, CU/AL Lugs
18 ea LXBR120C – 20A, 1P, Controlled Circuit Breaker/Relays (18 ea)
12 ea LXBR120N – 20A, 1P, Non-Controlled Circuit breakers (12 ea)
ordering Information
PAgE 10 6 hubbell-automation.com
The LXBR Circuit Breaker/Relays and Circuit Breakers are the heart of the LX Breaker
Control Panel Series. The use of a combination LXBC Lighting control panel can
save space by providing controlled and non-controlled loads in any combination.
LXBR Circuit Breaker/Relays communicate seamlessly with the LX Lighting Control
System to provide both control and branch circuit protection for the project’s
lighting loads.
Controlled Circuit Breaker/Relay1-Pole shown (2-Pole also available)
1-Pole 3-Pole
Non-controlled Circuit Breakers
LXBR Circuit Relays and Circuit Breakers LX SERIES NETWORKED LIgHTINg CONTROLS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PRODUCT fEATURESNETWORK
120277
VAC
480VAC
• Robust and reliable 20 and 30 Amp mechanically- latching Circuit Breaker/Relays
• Circuit Breaker/Relays are available in 1-pole, 120/277V and 2-pole, 480V
• Non-controlled Circuit Breakers are available in 1-pole to 120/277V and
2-pole or 3-pole, 480V
• All devices are rated for switching duty (SWD)
• 14,000 Amp interrupting capacity (AIC)
• Built-in ON/OFF indicator lever
• Five-year limited warranty
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 107
MODELlXbr LX Breaker Relay
or Breaker
NO. Of POLES1 1-Pole2 2-Pole3 3-Pole
AMP RATINg15 15 Amp20 20 Amp30 30 Amp40 40 Amp50 50 Amp60 60 Amp70 70 Amp90 90 Amp
100 100 Amp
CONTROLc Controlled
N Non-Controlled
NOTE: Controlled Breaker/Relays are available in 15A, 20A and 30A 1-Pole and 2-Pole ONLY.
lXbr
ordering Information
general Specifications
Physical Mechanically-held latching circuit breaker/relay or non-controlled circuit breaker Mounts in LXBC panel bus with bolt into pre-drilled and tapped hole Built-in ON/OFF indicator lever on each circuit breaker/relay Power to panel must be disconnected for insertion and removal of devices
Electrical 600VAC 20 Amp and 30 Amp Single and Double Pole Circuit Breaker/Relays Non-Control circuit breakers 15A – 100A, 1,2, and 3-pole 14KAIC @277/480V, 65KAIC Series Rated with main CB Circuit Breaker Relays – Maximum duty cycle of 6 Open/Close cycles per minute
Operating Environment for Location: interior space
NEMA 1 Rated Equipment Operating temperature: 0° to 50° C (32° to 112° F) Relative humidity (non-condensing): 10% to 90%
Certifications UL listed (UL 489)
Warranty Five-year limited
PAgE 10 8 hubbell-automation.com
general Specifications
Programming and Configuration Device used to program the functionality of other LX lighting control system devices Can program security codes
Physical Hand-held device Quarter VGA display (320 x 240 pixels)
Electrical 5VDC power—supplied from the LX panel
Operating Environment Location: interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative humidity (non-condensing): 10% to 90%
Dimensions 7.5”W x 6”H x 1”D
Warranty Five-year limited
LXTB
lXtb
MODELlXtb LX Touch Screen Tablet
Touch Tablet graphical User Interface LX SERIES NETWORKED LIgHTINg CONTROLS
PRODUCT fEATURES
ordering Information
NETWORK
The LXTB Touch Tablet Graphical User Interface provides easy-to-use intuitive
access to the LX System programming. The Tablet allows the user to program the
system, view status of devices and relays, and make changes to the system while
connected.
The LXTB is not required to be connected to the LX System for all functionality to
occur, rather it only displays activity such as clock time to the user. The LX system
program allows for user access to be define in the tablet, or facility managers can
simply control access to the tablet for system security.
• Portable hand-held touch screen
• Graphical user interface (GUI)
• Context-sensitive help
• Quarter VGA display (320 x 240 pixels)
• High-contrast backlit LCD screen
• Programmable security codes
• Five-year limited warranty
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 10 9
general Specifications
Network Interface Screw terminal connector
Operating Environment 32°to 140°F (0° to 60°C)
Relative humidity (non-condensing): 5% to 95%
Warranty Five-year limited
MODELlXtErMINator LX Free Topology Bus Terminator
LXTERMINATOR
lXtErMINator
Hubbell Building Automation’s LX Terminator ensures the correct operation of the
LX Series’ free topology (FT), twisted-pair communication networks. On an FT
network, each LX Series network segment needs to correctly terminate so that
network signals do not reflect back to the segment.
The LX Terminator absorbs these network signals and provides a low-cost solution
for terminating network segments. The LX Terminator is not required for link power
(LP) networks.
LX TerminatorLX SERIES NETWORKED LIgHTINg CONTROLS
• LX network segment terminator
• DIN Rail Mounting
• Five-year limited warranty
PRODUCT fEATURESNETWORK
ordering Information
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 110 hubbell-automation.com
LXBASM Building Automation ProtoNodeLX SERIES NETWORKED LIgHTINg CONTROLS
The Hubbell Building Automation ProtoNode is an external, high performance, low
cost Building Automation multi-protocol gateway for providing control and access
to Hubbell Building Automation’s LX Network Lighting Control Panel system. The
device provides protocol translation between LX systems and BAS/BMS services
using BACnet®, Metasys® N2 by JCI, and Modbus.
ProtoNode is designed to be used in facilities that need to quickly and easily enable
their LX Lighting Control Panels and Devices to interface with other protocols. The
ProtoNode device is pre-configured with LX system protocol interface and allows
the user to field select BAS system protocols including Modbus RTU, Modbus TCP,
BACnet/IP, BACnet MS/TP or JCI Metasys N2OPEN.
PRODUCT fEATURES
• Web browser based integration programming
• Device is field selectable for specific BAS protocol
• Sophisticated user account/password manager
• Integrates LX lighting control systems and Building Automation Systems (BAS)
• Supports BACnet®, Metasys® N2 by JCI, Modbus™ and LonWorks® protocols
• Automatically generates all required control points and documentation
for integration with the selected protocol
• Five-year limited warranty 4.52”
3.25”
1.6”
NETWORK
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 111
MODELlXbaSM LX Building Automation Interface, Universal Control
with Power Supply
Metasys® is a registered trademark of Johnson Controls, Inc.LonWorks® is a registered trademark of Echelon Corp.BACnet® is a registered trademark of ASHRAE
ordering Information
general Specifications
Supported Serial (RS-485) Protocols BACnet MS/TP Modbus RTU
Supported Ethernet Protocols BACnet IP Modbus TCP/IP JCI Metasys® N2OPEN
Supported Electrical Connections (1) 6 pin Phoenix Connector (1) RS-485 +/- Ground port Power +/- Frame Ground port (1) Ethernet -10/100 Ethernet port (1) FTT-10 LonWorks® port (LonWorks® Version)
Power Requirements 9-30 VDC or 12-24VAC Current draw @ 12V = 240 mA
Operating Environment Indoor use only -40°C to 75°C (-40°F to 167°F) Relative humidity (non-condensing): 5% to 90%
Dimensions 4.52”L x 3.25”W x 1.60”H
Approvals BACnet Testing Labs (BTL) B-ASC LonMark 3.4 Certified TUV approved to UL 916 standard and CSA C22-2 RoHS Compliant OPC Self Certified to Compliance CE Mark
Warranty Five-year limited
lXbaSM
PAgE 112 hubbell-automation.com
LXJNSYS
LX JENEsysTM
LX SERIES NETWORKED LIgHTINg CONTROLS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
PRODUCT fEATURES
NETWORK
LX JENEsys provides a simple and easy-to-use interface to the LX Networked
Lighting Control System via Personal Computer. The LX JENEsys allows any PC
with an Internet Explorer compatible browser to interface with the LX JENEsys
lighting control system through a built-in web server. The LX JENEsys provides
an easy-to-use and highly intuitive graphical user interface (GUI). System users
can easily program, monitor, and control (locally or remotely) all the functions of
the LX lighting controls system conveniently from their PC—all without installing
software.
• Real-time programming and monitoring of the LX lighting control system through your PC
• No software required—built-in web server provides connection via any Internet Explorer®-compatible browser
• Graphical User Interface (GUI) makes programming both intuitive and simple
• Local or remote access via the local network or Internet
• Can connect multiple users at once
• Sophisticated user account/password manager
• Powered by the revolutionary NiagaraAX Framework®
• Five-year warranty
4.82”
6.25”
2.43”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 113
MODELlXJNSYS LX JENEsys Controller with Management
Software, LON Network Module and Power Supply
lXJNSYS2loN N LX JENEsys Controller with Management Software, LON Integration Support, LON Network Modules and Power Supply
ordering Information
PAgE 114 hubbell-automation.com
LXSW1 LXSW3
LXSW5
LXSW2
LXSW4 LXSW6
LX Switch Station LX SERIES NETWORKED LIgHTINg CONTROLS
LX Switch Stations are designed for virtually any area. The soft contours of its
architecturally-pleasing design fit easily into any décor. Each switch can be
individually programmed to control a single relay, group of relays, or preset scene.
In addition to flexible switch functionality, LX Switch Stations can be programmed
to be active only during a specific time window. This function allows the switch
station to be automatically secured when they are not being used, which eliminates
the need for lockout key switches and locking covers.
• Attractive, architecturally-pleasing design
• Flexible programming of switch functionality
• Programmable active and inactive times
• Topology-free, polarity-insensitive, 2-wire communication
• FT-10 and LPT-10 versions available
• LonMark ® certified
• 1–6 buttons with or without pilot
• Mounts to standard single-gang box
• Five-year limited warranty
PRODUCT fEATURES
4.13”
1.13”
1.13”
NETWORK
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 115
general Specifications
Network Interface FTT-10 or LPT-10
Programming and Configuration Programmable over a network using the LX Touch Tablet or any other LX programming device
Physical Injection-molded switch plate and switches Fits standard (Decorator style) wall switch plates (not included) Mounts to standard electrical gang box
Electrical LPT-10 version: powered from Link Power Module FTT-10 version: 24 volts AC or DC; .5Amps required
Operating Environment Location: interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative humidity (non-condensing): 10% to 90%
Dimensions 4.13”H x 1.13”D x 1.13”W
Capacities 1–6 buttons
Certifications LonMark 3.3 certified Warranty Five-year limited
NO. Of BUTTONS123456
NETWORK INTERfACE lP Link Power LPT-10 ft FTT-10 24V AC or DC
COLORW WhiteI Ivory
MODELlXSW
EXAMPLE:White 4 Button FT Switch Station: LXSW4FTW
lXSW
ordering Information
LX Switch Stations
Installation Instructions
Hubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com
OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Switch Station.
Precautions• RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical components.• For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instruc- tions.• For indoor use only.• Read and understand all instructions before beginning installation.• USE COPPER CONDUCTOR ONLY.• NOTICE: Do not install if product appears damaged.
Installation1. Prepare the installation site as necessary. Rough-in wall switch boxes and route power supply and LON Network leads as neces- sary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements.2. Assign Network Address as described in the Assigning Switch Station Network Address Section.3. With power off, connect power supply leads (FT Version only) and LON Network leads to the Switch Station as shown in the Wiring Diagram.4. Apply power to the system and verify that the Switch Station’s Power Indicator LED (reference Switch Station Controls Diagram) is lit.5. Program Switch Station button controls and lighting system func- tionality as described in the Programming Switch Station Functions Section.
Figure 1:Wiring Diagram
Figure 2: Switch Station Controls Diagram
Assigning Switch Station Network AddressThe Switch Station network address is set via three rotary dials located under the Switch Station facia (face cover) as shown in the Switch Station Controls Diagram. Each Switch Station is factory set to address 001 prior to shipping. For LX-only networks, each Switch Station on the network will need to be assigned a unique network address. Addresses must be assigned in sequential order starting with address 001. For LonWorks Open System Networks, each Switch Station on the network must be programmed for LonMARK Mode. Address dial settings have no effect in LonMARK Mode.
To set the Switch Station Address, carefully remove the Switch Sta-tion facia (front cover) to gain access to the address controls. Insert a small blade screwdriver into the facia catch release as shown in the Facia Removal Diagram and gently snap it loose at the top edge. Remove the facia along with any buttons that obscure the three rotary dials as shown in the Switch Station Controls Diagram. Rotate the appropriate dial(s) with the small, blade screwdriver till the indica-tor points to the appropriate number. Assign each Switch Station its address as delineated in the project plans as applicable. Dial “A” sets the most signifi cant digit of the network address and Dial “C” sets the least signifi cant digit of the network address. For example, address 001 is set by Dial A = “0”, Dial B = “0” and Dial C = “1”.
LX Switch Stations
Installation Instructions
Hubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com
OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Switch Station.
Precautions• RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical components.• For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instruc- tions.• For indoor use only.• Read and understand all instructions before beginning installation.• USE COPPER CONDUCTOR ONLY.• NOTICE: Do not install if product appears damaged.
Installation1. Prepare the installation site as necessary. Rough-in wall switch boxes and route power supply and LON Network leads as neces- sary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements.2. Assign Network Address as described in the Assigning Switch Station Network Address Section.3. With power off, connect power supply leads (FT Version only) and LON Network leads to the Switch Station as shown in the Wiring Diagram.4. Apply power to the system and verify that the Switch Station’s Power Indicator LED (reference Switch Station Controls Diagram) is lit.5. Program Switch Station button controls and lighting system func- tionality as described in the Programming Switch Station Functions Section.
Figure 1:Wiring Diagram
Figure 2: Switch Station Controls Diagram
Assigning Switch Station Network AddressThe Switch Station network address is set via three rotary dials located under the Switch Station facia (face cover) as shown in the Switch Station Controls Diagram. Each Switch Station is factory set to address 001 prior to shipping. For LX-only networks, each Switch Station on the network will need to be assigned a unique network address. Addresses must be assigned in sequential order starting with address 001. For LonWorks Open System Networks, each Switch Station on the network must be programmed for LonMARK Mode. Address dial settings have no effect in LonMARK Mode.
To set the Switch Station Address, carefully remove the Switch Sta-tion facia (front cover) to gain access to the address controls. Insert a small blade screwdriver into the facia catch release as shown in the Facia Removal Diagram and gently snap it loose at the top edge. Remove the facia along with any buttons that obscure the three rotary dials as shown in the Switch Station Controls Diagram. Rotate the appropriate dial(s) with the small, blade screwdriver till the indica-tor points to the appropriate number. Assign each Switch Station its address as delineated in the project plans as applicable. Dial “A” sets the most signifi cant digit of the network address and Dial “C” sets the least signifi cant digit of the network address. For example, address 001 is set by Dial A = “0”, Dial B = “0” and Dial C = “1”.
PAgE 116 hubbell-automation.com
The LX Keyed Switch Station is designed for use in virtually any space that requires
restricted access to switch functionality. The stainless steel faceplate and secure
barrel-style locking mechanism provide significant tamper and vandal deterrence.
The switch can be individually programmed to control a single relay or group
of relays. In addition to flexible programming of switch functionality, LX Keyed
Switch Stations can be programmed to be active only during a specific time
window, allowing the switch station to be automatically disabled when they are
not required. This provides a second layer of access control.
• Stainless steel face plate with barrel-lock mechanism and pilot light
• Flexible programming of switch functionality
• Programmable Active & Inactive times
• Topology-Free, Polarity-Insensitive, 2-wire communication
• Mounts in standard single-gang box
• Five-year limited warranty
LXKEY
Keyed Switch StationLX SERIES NETWORKED LIgHTINg CONTROLS
PRODUCT fEATURESNETWORK
4.5” 4.13”
2.75”
1.13”
1.13”
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 117
NETWORK INTERfACElP
COLORblaNk Stainless Steel2
MODELlXkEY1
NOTES:1. LXKEY is available with 1 keyswitch only and "LP" Link Power only.2. LXKEY available in Stainless Steel only (not available in white or ivory).
lXkEY lP
ordering Information
general Specifications
Network Interface LPT-10
Programming and Configuration Programmed over network using the LX Touch Tablet or any other LX programming device
Physical Stainless steel faceplate Barrel-style locking switch mechanism Mounts to standard electrical gang box
Electrical LPT-10: Powered from Link Power Module
Dimensions Switch Station: 4.13”H x 1.13”W x 1.13”D Face Plate: 4.5”H x 2.75”W
Operating Environment Location: Interior space Operating temperature: 0° to 50°C (32° to 122°F) Relative Humidity: 10% to 90% non-condensing
Warranty Five-year limited
LX Keyed Switch Station - LXKEYILP
Installation InstructionsHubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com
OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Keyed Switch Station.
Precautions • RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical compo-nents. • For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instructions. • Indoor use only. • Read and understand all instructions before beginning installation. • USE COPPER CONDUCTOR ONLY. • NOTICE: Do not install if product appears damaged.
Installation 1. Prepare the installation site as necessary. Rough-in wall switch boxes and route LON Network leads as necessary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements. 2. Assign Network Address as described in the Assigning Switch Sta-tion Network Address Section. 3. With the Link Power supply off, connect LON Network leads to the Switch Station as shown in the Wiring Diagram, Figure 1. 4. Attach wire connector from key switch on switch station cover to the connector on the circuit board as shown in Figure 2. The connec-tor is not polarized and can be inserted in either direction.5. Use the supplied screws to attach the stainless steel cover and the device in the wall switch box at the same time.6. Apply Link Power to the system and verify that the Switch Station is powered. The green LED will light when the key is turned to the ON position.7. Program Switch Station button controls and lighting system func-tionality as described in the Programming Switch Station Functions Section.
Figure 1: Wiring Diagram
Figure 2: Keyed Switch Station Controls Diagram
LX Keyed Switch Station - LXKEYILP
Installation InstructionsHubbell Building Automation, Inc.9601 Dessau Road • Building One • Suite 100Austin, Texas 78754 512-450-1100 • 512-450-1215 Faxwww.hubbell-automation.com
OverviewThese instructions provide guidelines for setting up, installing, and programming the LX Keyed Switch Station.
Precautions • RISK OF ELECTRICAL SHOCK. Turn power off at service panel before beginning installation. Never wire energized electrical compo-nents. • For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following instructions. • Indoor use only. • Read and understand all instructions before beginning installation. • USE COPPER CONDUCTOR ONLY. • NOTICE: Do not install if product appears damaged.
Installation 1. Prepare the installation site as necessary. Rough-in wall switch boxes and route LON Network leads as necessary. Reference Open System Architecture Communication Network Section for additional information on the communication network requirements. 2. Assign Network Address as described in the Assigning Switch Sta-tion Network Address Section. 3. With the Link Power supply off, connect LON Network leads to the Switch Station as shown in the Wiring Diagram, Figure 1. 4. Attach wire connector from key switch on switch station cover to the connector on the circuit board as shown in Figure 2. The connec-tor is not polarized and can be inserted in either direction.5. Use the supplied screws to attach the stainless steel cover and the device in the wall switch box at the same time.6. Apply Link Power to the system and verify that the Switch Station is powered. The green LED will light when the key is turned to the ON position.7. Program Switch Station button controls and lighting system func-tionality as described in the Programming Switch Station Functions Section.
Figure 1: Wiring Diagram
Figure 2: Keyed Switch Station Controls Diagram
PAgE 118 hubbell-automation.com
LXOMDT2000
LXOMNI™ Dual Technology Occupancy Sensor LX SERIES NETWORKED LIgHTINg CONTROLS
PRODUCT fEATURES
• FT-10 and LPT-10 versions available
• Topology-free, polarity-insensitive, 2-wire communication
• IntelliDAPT self-adaptive technology - no manual adjustment required
• All-digital dual technology (ultrasonic [US] and passive infrared [PIR]) sensor
• Non-volatile memory for sensor settings
• 2,000 square-foot coverage area (depending on model)
• UL and cUL listed
• California Title 24 compliant
• LonMark® certified
• Five-year limited warranty
IntelliDAPTOCCUPANCY
SENSINGNETWORK
The LX Occupancy Sensor is a LonMark ® certified device that represents the
state-of-the-art in sensor technology, combining both ultrasonic (US) and passive
infrared (PIR) technologies for unequaled occupancy detection and false trip
immunity. Both FT-10 and LPT-10 versions are available.
The LX Occupancy Sensor features Hubbell Building Automation’s patented
IntelliDAPT technology, which makes all the sensor adjustments automatically.
Throughout the product’s lifespan, smart software analyzes the controlled area
and makes digital adjustments to sensitivity and timer settings. Occupancy sensors
with IntelliDAPT provide a maintenance-free install-and-forget operation.
1.5”
PIR Sensor
4.5”
UltrasonicSensor
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 119
MODELlX
lX
DEVICE TYPEoMdt 2000
NETWORK INTERFACElPft
general Specifications
Network Interface FTT-10 or LPT-10
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting passive infrared thresholds Automatic false-on/false-off corrections
LED Lamp Red- infrared motion Green- ultrasonic detection
Time Delay Automatic mode: 8–30 min. (self-adjusts based on occupancy) Manual mode: 2-30 min. Test mode: 8 seconds (for an easy check at installation)
Ultrasonic (US) Output 32kHz
Passive Infrared (PIR) Dual-element pyrometer and 12-element cylindrical rugged lens
Programming and Configuration LX mode- programed over network using LX Touch Tabley, JENEsysTM
Coverage 2,000 square feet
Power Requirements LP Version requires 42VDC, (Provided by the LXLPM2) ; FT Version requires 24VDC, (Provided by the LXPWRSPLY)
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Construction Casing- rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors
Color-coded leads are 6” long
Dimensions 4.5”DIA x 1.5”H
Weight 5.0 oz
Color Off-white
Mounting Mounting base provided Recommended MAX mounting height: 8ft with a max mounting height of 12ft
Certifications LonMark 3.3 certified
UL and cUL listed
Warranty Five-year limited
32' 23'
64'45'
12'22'
IR Minor Motion
IR Major Motion
US Minor Motion
US Major Motion
ordering Information
oMdt 2000
PAgE 120 hubbell-automation.com
LXPSPCO LXPCPCSLXPSPCI
LXPSCM
The LX Photo Sensor and Control Module provides a convenient method of turning
lighting circuits on and off in response to natural light. With 6 individually programmable
on and off set points, this device can control multiple lighting circuits to respond to
different natural lighting levels. This eliminates the need for multiple photosensors.
Real-time photometric information is transmitted over the LX network and displays on
either the LX tablet (or another programming device connected to the network). Each of
the 6 set points can be programmed to control a single relay, group of relays, or preset
scene. For added control, the LX Photo Sensor Control Module can be programmed to
be active or inactive during a specific time window.
LX Photo Sensor and Control ModuleLX SERIES NETWORKED LIgHTINg CONTROLS
• Turns lighting on and off based on available natural light
• Network-based photosensor control module
• Real-time foot-candle levels transmitted over a network on demand to a tablet
• 3 available sensor heads - Indoor, Outdoor, and Skylight/Atrium
• 0-1,000 foot-candle range with 1 foot-candle resolution
• 6 programmable on and off set points
• Programmable active and inactive times
• Topology-free, polarity-insensitive, 2-wire communication
• FT-10 and LPT-10 versions available
• LonMark ® certified
• Mounts to standard DIN Rail
• Five-year limited warranty
PRODUCT fEATURESNETWORK
DAYLIGHTHARVESTING
3.75”
6.25”
1.5”
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 121
LonWorks ® is a registered trademark of Echelon Corporation.LonMark ® is a registered trademark of LonMark International.
MODELlXPS
lXPS cM
DEVICE TYPEcM
NETWORK INTERFACElPft
NotE: 1. LXPSCM Photo Sensor Control Module Support only one (1) Photo Sensor head. Photo Sensor head is ordered separately.
general Specifications
Network Interface FTT-10 or LPT-10
Programmable Functionality Each on and off set point can be programmed to control a single relay, group of relays, or preset scene Active and inactive times
Programming Programmable over a network using the LX Touch Tablet
Capacities 6 programmable on and off set points with adjustable deadband
Photocell Ranges 0–1,000 foot-candle range with 1 foot-candle resolution
Electrical LXPSCMLP: Powered from the Link Power network LXPSCMFT: 16–30 Volts AC or DC; .5 Amps required
Operating Environment Indoor use only (Except LXPSPCO) Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Dimensions 6.25”L x 3.75”H x 1.5”W
Weight 6.0 oz.
Color Photo Sensor Control Module—black Photo Sensor Photocells—white
Mounting Mounts to a 35mm DIN rail
Certifications LonMark 3.3 certified
Warranty Five-year limited
ordering Information
MODELlXPS
lXPSP
DEVICE TYPEPcI PHOTOCELL INDOOR
Pco PHOTOCELL OUTDOOR
PcS PHOTOCELL SKYLIGHT / ATRIUM
control Module
Photo Sensor
PAGE 122 hubbell-automation.com
LXDCIMFT
LX Dry Contact Interface ModuleLX SERIES NETWORKED LIGHTING CONTROLS
The LX Dry Contact Interface Module provides a simple method of incorporating
standard dry contact inputs into the LX lighting control system. This device can
incorporate dry contact closures from building automation, fire, and security alarm
systems. It can also incorporate virtually any dry contact device (momentary or
maintained).
Each of the 6 available inputs can be individually programmed to control a single
relay, group of relays, or preset scene. For added control, the LX Dry Contact Input
Module can be programmed to be active or inactive during specific time windows.
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PRODUCT FEATURES
• Programmable interface for dry contact devices
• Flexible programming of switch functionality
• 6 individual dry contact inputs with or without pilots
• Accommodates 2- and 3-wire devices (momentary or maintained)
• Programmable active and inactive times
• Topology-free, polarity-insensitive, 2-wire communication
• LonMark ® certified
• Mounts to standard DIN rail
• Five-year limited warranty
NETWORK
3.75”
6.25”
24V Supply Input
Contact Input Ports
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 123
MODELlX
lX dcIM ft
DEvICE TYPEdcIM1
NETWORK INTERfACEft
NOTE: 1. FT ONLY.
general Specifications
Network Interface FTT-10
Programmable Functionality Maintained contact switch input: - toggle, on only, off only Momentary contact switch input: - push button toggle, on only, off only Preset Timed on
Programming Programmable over a network using the LX Touch Tablet
Capacities Maximum of 6 momentary or maintained switches (2- or 3-wire)
Electrical 16–30 Volts AC or DC; .5 Amps required
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
Dimensions 6.25”L x 3.75”H x 1.5”W
Weight 6.0 oz
Color Black
Mounting Mounts to a 35mm DIN rail
Certifications LonMark 3.3 certified
Warranty Five-year limited
ordering Information
Use 2, 3, or 4-conductor, 20AWG non-shielded cable as appropriate. 1000ft. maximum length.
24V DC Power SupplyUse LXPWRSLPY
LON Network Interface
PAgE 124 hubbell-automation.com
The Hubbell Building Automation Line V Automatic Line Voltage Switches
provide feature cost effective lighting control for maximum energy savings. The
switches operate based on timed blink patterns from the LX Panels to activate
internal relays ON, OFF or override an impending OFF schedule for user selectable
periods of 30, 60, 90, or 120 minutes. The LX Panels are designed to control the
relay timed blinks to allow for a single relay to signal multiple Line V switches to
perform the desired functions.
The 1-Relay version has standard capability to be wired to addition switches for
3-way and 4-way operation on a single zone. The 2-Relay version allows for bi-level
switching within a single zone. Signal ON can be selected for 1 or 2 relays.
• Two switch configurations – 1-Relay and 2-relay
• 1-Relay model controls a single zone or can be connected for 3-way
and 4-way operation
• 2-Relay model provides single circuit input for dual level area control
• Switches are controlled ON or OFF from the LX Panel using OFF intervals
from a single relay
• Allows for retrofit of standard line voltage toggle switches for automatic
schedule ON/OFF control
• Blink warning allows user to initiate override of 30, 60, 90, or 120 minutes and
cancel OFF event
• Switches operate without the need for a neutral connection
• Dual 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• ETL, UL, and cUL listed
• California Title 24 compliant
• Five-year limited warranty
PRODUCT fEATURES
LINEVAS1BUNVWH LINEVAS2BUNVWH
LX Line v Automatic Line voltage Switches
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
LX SERIES NETWORKED LIgHTINg CONTROLS
4.29”
2.1”
1.8”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 125
general Specifications
Programming and Configuration Programmable via DIP switches mounted on door All control functions are issued at the switch
Relays Configurations 1-Relay – Single Zone OR 3-Way/4-Way operation 2-Relays – Single circuit input for Bi-Level Control
Power Requirements 120/277VAC; 50/60Hz
Electrical Ratings 120VAC: 5.0 Amps Tungsten; 10.0 Amps Fluorescent; 1/3 HP 277VAC: 10.0 Amps Fluorescent; 1/6 HP
Load Requirements None
Operating Environment Indoor use only Operating temperature: 32°–104°F (0°–40°C) Relative humidity (non-condensing): 0%–95%
Construction Casing—high-impact injection-molded plastic (UL-94-5V) Color-coded leads are 6” long
Dimensions 4.2”H x 1.8”D x 2.1”W; .37” extension
Weight 2.9 oz.
Color White; Ivory; Light Almond; Gray; Black
Mounting Single-gang NEMA-style switch box (average switch box) Decorator-style wall plate not included
Certifications ETL, UL, and cUL listed
Warranty Five-year limited
lINEVaS1buNVbk Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Black
lINEVaS1buNVgY Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Gray
lINEVaS1buNVIV Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Ivory
lINEVaS1buNVla Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Light Almond
lINEVaS1buNVWH Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way White
lINEVaS2buNVbk Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Black
lINEVaS2buNVgY Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Gray
lINEVaS2buNVIV Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Ivory
lINEVaS2buNVla Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Light Almond
lINEVaS2buNVWH Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single White
ModEl/dEScrIPtIoN
ordering Information
PAgE 126 hubbell-automation.com
LXLPM2
Hubbell Building Automation’s LX Link Power Module is a self-contained
power supply that provides operating power to LX Series twisted-pair
communication networks.
This module powers a multitude of device types, such as LX switch stations,
LX occupancy sensors, and LX photosensor control modules. The device’s
versatility enables it to support a variety of network topologies, including
Star and T-configurations.
• Power supply for LX Series Link Power-based devices
• Short-circuit and overcurrent monitoring
• Bus termination by switch
• DIN rail mount
• Five-year limited warranty
LX Link Power ModuleLX SERIES NETWORKED LIgHTINg CONTROLS
120VAC
PRODUCT fEATURESNETWORK
3.54”
4.96”
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 127
general Specifications
Power Supply Rated input voltage: 120VAC (85-132V) Rated frequency: 50/60 Hz Rated input current: 0.7A
Output to Bus Output voltage: 41.5V; +/-2.2% Residual ripple: <80mV at 10 kHz (200mV at f>200kHz) Output current: 1A (supports approximately 56 LX Series devices) (For larger networks, an additional LX Link Power Module and
LX Router/Repeater Module can be added to expand the LX network)
Overload protection: typical at 1.6A; permanent short circuit proof with pulsing “try of restart”
Connectors Screw terminal
Operating Environment Indoor use only Operating temperature: 32° to 104°F (0° to 40°C) Relative humidity (non-condensing): 0% to 95%
EMC Emission: EN61,000-6-3; class B; EN50090-2-2 Immunity: EN61,000-4-2/3/4/5/6; class A
Dimensions 4.96”L x 2.28”W x 3.54”H
Warranty Five-year limited
ordering Information
MODELLXLPM2 LX LINK POWER MODULE
LXLPM2
PAgE 128 hubbell-automation.com
LXRRM
Hubbell Building Automation’s LX Router/Repeater Module interconnects
multiple LX Series communication-network segments and refreshes the
network signal from one segment to the next thus
increasing the maximum transmission distance.
This module is required for networks where either the network wire length
exceeds the maximum limit (1,500 feet) or there are more than 56 devices
per segment. With the LX Router/Repeater Module, two independently-
powered network segments can share their information while maintaining
each segment’s power system separately.
LX Router/Repeater ModuleLX SERIES NETWORKED LIgHTINg CONTROLS
• Repeater for LX Series networks
• Screw terminal wiring connections
• 16–30VAC or VDC operation
• LonMark™ certified
• UL listed
• Five-year limited warranty
PRODUCT fEATURESNETWORK
3.9”
6.3”
1.0”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 129
general Specifications
Processor 2 Neuron 3150® Chips; 10MHz
Service Function Recessed service switch and service (wink) LED. Dual tear-off bar code Neuron ID self-adhesive tag
Channel Type TP/FT-10 to TP/FT-10
Input Power 16–30VAC or DC @ 24VA Requires a separate power supply (the LXPWRSPLY)
Mounting DIN Rail
Operating Environment -40° to 185°F (-40° to 85°C) Relative humidity (non-condensing): 10% to 95%
Dimensions 3.9”L x 6.3”H x 1.0”W
Certifications UL 916; FCC A; CE Mark
Warranty Five-year limited
MODELlXrrM LX Repeater
lXrrM
ordering Information
PAgE 13 0 hubbell-automation.com
LXPWRSPLY
Hubbell Building Automation’s LX Power Supply provides power to
free topology(FT)-based LX Series devices. The 30W, single-output,
Class 2, DIN rail power supply can power LX switch stations, LX
occupancy sensors, LX photosensor control modules, and LX dry contact
interface modules.
This power supply also features an LED indicator for power-on status and
short-circuit, overload, and overvoltage protection support.
• Universal AC input 120VAC (100–240V); line and neutral single phase only
• DIN rail mountable: TS35/7.5; TS35/15
• Protection: short circuit, overload, and over-voltage
• LED indicator for power on
• UL listed
• Five-year limited warranty
24VDC
LOW
VOLTAGE
PRODUCT fEATURESNETWORK
3.5”
3.0”
LX Power SupplyLX SERIES NETWORKED LIgHTINg CONTROLS
2.5”
120VAC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 131
MODELlXPWrSPlY LX Power Supply
lXPWrSPlY
general Specifications
AC Input Voltage Range 120VAC (100–240V), 50-60HZ Line and Neutral Single Phase only
Output 24V; 0–1.5A
Tolerance +/-1%
Efficiency 83%
DC Adjustment Range Rated output voltage: +/-10%
Overload Protection 105% to 160% constant current limiting; auto-recovery
Over-voltage Protection Rated output voltage: 115% to 135%
Setup; Rise; Hold-up Time 100ms, 70ms, 100ms at full load and 132VAC
Withstand Voltage I/P-O/P:3KVAC
Connection I/P: 2 poles O/P: 4 poles screw DIN terminal
Dimensions 3.0”L x 3.5”H x 2.5”W
Operating Environment -4° to 22°F (-20°to 50°C) @100% load 140° F (60° C) @ 80% load
Certifications UL60950-1; TUV EN60950-1
EMC EN55022 class B; EN61,000-3-2,3; EN61,000-6-2; EN61,000- 4-2,3,4,5,6,8,11; ENV50204; EN61204-3
Warranty Five-year limited
ordering Information
PAgE 132 hubbell-automation.com
• NEMA 1 rated metal enclosure
• Screw-mount cover
• Includes 2 DIN rails
general Specifications
Dimensions 12”H x 15”L x 4”W
Weight 11 lbs.
NEMA 1 Rated Provides a degree of protection for people against contact with the enclosed devices Provides a degree of protection for the enclosed devices against falling dirt
Warranty Five-year limited
ModEllXENdM LX Enclosure for DIN Rail
Device Modules
LXENDM
lXENdM
LX Enclosure for DIN Rail ModulesLX SERIES NETWORKED LIgHTINg CONTROLS
Hubbell Building Automation’s LX Enclosure for DIN Rail Modules is designed to
enclose our DIN rail-mountable devices and power supplies. The surface-mount
metal enclosure is NEMA 1 rated and is suitable for dry indoor locations, such as
electrical rooms and closets. The enclosure also comes with a screw-mount cover
and 2 DIN rails that can be mounted in multiple ways.
PRODUCT fEATURES
ordering Information
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 133
general SpecificationsEach Kit Includes: 2 ea - Wire Way Divider Plates 2 ea - Stainless Steel mounting Screws Installation Instructions
Operating Environment Indoor use only
Dimensions 4.25”W x 3.25”L
Weight 3.0 oz.
Color ANSI 61 Gray Polyester Powder Coat
Certifications For use with LX Series UL and cUL Listed LXIN and LXEN network lighting control panels (except LXEN04)
Warranty Five-year limited
MODELlXWrdV Wire Way Divider Kit for LX
Series Relay Panels
lXWrdV
Panel Wire Way Divider Accessory KitLX SERIES NETWORKED LIgHTINg CONTROLS
Hubbell Building Automation’s LXWRDV Panel Wire Way Divider Accessory Kit provides
the ability to place a physical barrier in the line voltage wire’s way to separate different
voltages or sources. This accessory is field-installed and ordered separately. Each kit
includes two code-gauge steel divider plates and mounting hard-ware. Dividers are
easily installed between relays and therefore
do not consume any relay spaces.
• Provides physical code-gauge steel separation between different voltages or sources that share the same relay panel
• Field-installed
• Can be mounted at any location
• Fits between relates – no loss of relay spaces
• For use with LX Series Lighting Control Panels (Except 4 relay LX panels)
PRODUCT fEATURES
ordering Information
PAgE 13 4 hubbell-automation.com
BELDEN 8471
PVC Jacket(Unsheilded)
Twisted Pair #16 Tinned Copper Conductors, PVC Insulation
lX SYStEM NEtWork cablE rEQuIrEMENtSHubbell Building Automation’s LX Lighting Control System requires the use of Belden #8471 cable for Riser Rated applications
OR Windy City Wire #104500 for Plenum Rated applications. These are the ONLY cables that can be used for network wiring with
the LX System.
The use of substitute cables based on similar physical characteristics is not allowed and will VOID any HBA warranty for the LX
system or any LX component connected to the substitute cable.
Riser Rated Belden 8471 CableLX SERIES NETWORKED LIgHTINg CONTROLS
Hubbell Building Automation’s LX network cable is used to interconnect LX
Panels, LX Devices and LX Accessories for a complete communications network.
All devices that communicate on the LX Network are connected with the same
type of twisted pair cable. Both power and data are carried over the same two
wires. The LX System is wired as a topology-free, polarity-insensitive network. HBA
supplied LX Network Cables assure proper network communications and should
be specified and installed on all LX System projects.
PRODUCT fEATURES
• Interconnects LX Lighting Control Panels and LX network devices
• Cable carries both power and data in a single twisted pair
• Belden #8471 - twisted pair #16 tinned copper
• Single cable type connects to all types of LX network devices
• Echelon Guideline Compliant for LON networks
• Available in 100 ft and 500 ft reels
• Riser Rated
• Connects to terminal blocks or with twist on connectors
• UL and cUL Listed
• One-year limited warranty
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 135
INStallatIoN NotES
1. DO NOT exceed 1500 feet of cable OR connect more than 56 devices per network segment.
2. Each network segment using LP style devices requires an LXLPM2 Link Power Module for device power. Each additional segment requires an additional LXLPM2 Link Power Module and an LXRRM Repeater for data transmission between segments.
3. Each network segment existing of panels only or that use FT style devices only require termination with LXTERMINATOR instead of LXLPM2 Link Power Module.
4. Run cable and connect network with the shortest distances possible. The most efficient network is wired similar to branch circuit outlets.
5. When using twist-on wire connectors with network cable use no more than three wires per connector.
6. The use of T-taps to minimize cable length is encouraged. Daisy chain topology is allowed, but most often increases overall cable length.
7. DO NOT homerun all devices individually, or leave spare cable at ceiling mounted devices. If devices need to be relocated, cables can be extended with twist-on wire connectors.
8. DO NOT mix plenum and NON-plenum cables on the same segment.
9. Keep 12” minimum from line voltage, do nut run in the same raceway with line voltage.
*All sales are final, no returns are allowed.
MODELlX8471cbl100* LX Cable Belden 8471 Riser Rated 100 ft ReellX8471cbl500* LX Cable Belden 8471 Riser Rated 500 ft Reel
general Specifications
Description 1 pair - 16 AWG stranded tinned copper conductors, PVC Insulation, unshielded twisted pair (UTP), PVC jacket
Shielding Unshielded
Overall Nominal Diameter 0.274 inches
Plenum Rating Not Plenum Rated
Operating Temperature Range -20°C to +80°C (Indoor use only)
Maximum Pulling Tension 61 lbs
Minimum Bend Radius 5.1 inches
Color Pair Color - Black/White, Outer Jacket - Gray
Certifications NEC (UL) CMG, CEC/C (UL) CMG,
Flame Test UL Flame Test – UL1685 FT4 Loading, C (UL) Flame Test FT4
Warranty One-year limited
ordering Information
PAgE 136 hubbell-automation.com
lX SYStEM NEtWork cablE rEQuIrEMENtSHubbell Building Automation’s LX Lighting Control System requires the use of belden #8471 cable for riser rated applications
or Windy city Wire #104500 for Plenum rated applications. These are the ONLY cables that can be used for network wiring
with the LX System.
The use of substitute cables based on similar physical characteristics is not allowed and will VoId any Hba warranty for the LX
system or any LX component connected to the substitute cable.
Plenum Rated Windy City Wire 104500 CableLX SERIES NETWORKED LIgHTINg CONTROLS
Hubbell Building Automation’s LX network cable is used to interconnect LX Panels, LX Devices and LX Accessories for a complete
communications network. All devices that communicate on the LX Network are connected with the same type of single twisted pair
cable. Both power and data are carried over the same two wires. The LX System is wired as a topology-free,
polarity-insensitive network. HBA supplied LX Network Cables assure proper network communications and should be specified and
installed on all LX System projects.
PRODUCT fEATURES
• Interconnects LX Lighting Control Panels and LX network devices
• Cable carries both power and data in a single twisted pair
• Windy City Wire #104500 - twisted pair #16 tinned copper
• Single cable type connects to all types of LX network devices
• Echelon Guideline Compliant for LON networks
• Available in 100 ft and 500 ft reels
• Plenum Rated
• Connects to terminal blocks or with twist on connectors
• UL and cUL Listed
• One-year limited warranty
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 137
INStallatIoN NotES
1. DO NOT exceed 1500 feet of cable OR connect more than 56 devices per network segment.
2. Each network segment using LP style devices requires an LXLPM2 Link Power Module for device power. Each additional segment requires an additional LXLPM2 Link Power Module and an LXRRM Repeater for data transmission between segments.
3. Each network segment existing of panels only or that use FT style devices only require termination with LXTERMINATOR instead of LXLPM2 Link Power Module.
4. Run cable and connect network with the shortest distances possible. The most efficient network is wired similar to branch circuit outlets.
5. When using twist-on wire connectors with network cable use no more than three wires per connector.
6. The use of T-taps to minimize cable length is encouraged. Daisy chain topology is allowed, but most often increases overall cable length.
7. DO NOT homerun all devices individually, or leave spare cable at ceiling mounted devices. If devices need to be relocated, cables can be extended with twist-on wire connectors.
8. DO NOT mix plenum and NON-plenum cables on the same segment.
9. Keep 12” minimum from line voltage, do nut run in the same raceway with line voltage.
*All sales are final, no returns are allowed.
ordering Information
general Specifications
Description 1 pair - 16 AWG stranded tinned copper conductors, PVC Insulation, unshielded twisted pair (UTP), PVC jacket
Shielding Unshielded
Overall Nominal Diameter 0.182 inches
Plenum Rating Plenum Rated
Operating Temperature Range 0°C to +75°C (Indoor use only)
Maximum Pulling Tension 61 lbs
Minimum Bend Radius 5.1 inches
Color Pair Color - Black/White, Outer Jacket - White
Certifications NEC (UL) Subject 444 Type CL2P/CMP, CSA (cUL)
Flame Test NFPA 262 Steiner Tunnel Test
Warranty One-year limited
MODELlX104500cbl100* LX Cable Windy City 104500 Plenum Rated 100 ft ReellX104500cbl500* LX Cable Windy City 104500 Plenum Rated 500 ft Reel
PAgE 13 8 hubbell-automation.com
SAvE TIME
• Compact single enclosure includes relays,
control functions and input terminals for low
voltage devices.
• All inputs are software assignable to any HBA
low voltage input device including switches,
motion sensors, and photocells.
• Low voltage devices connect directly to panel
without any ancillary parts such as power packs.
• LCD user interface incorporates easy to follow
intuitive programming tools.
SAvE ENERgY
• HBA CX Panels meet ASHRAE 90.1, IEEC and
California (CEC) Title 24 energy codes.
• CX Panels contribute to LEED certification
requirements.
• Allows multiple low voltage inputs from HBA
switches, motion sensors, and photocells to
enhance energy savings for scenarios such as
manual switch ON and automatic motion sensor
OFF control.
LOWER COST
• Can save up to 50% in parts and labor cost over
conventional time clock and contactor systems.
• Lowers energy consumption with expanded
programming options.
• Astronomical clock eliminates the need for roof
mounted photocells.
• Pre-programmed scenarios offer a wide variety
of options to maximize energy savings for each
possible control zone.
INCREASE CONTROL
• Sunrise/sunset controls provided using internal
astronomical clock.
• Scenarios offer many easy to use control
combinations.
• Priorities and masking allow for personalized
control solutions.
• Dimming option for most 0-10V ballasts and
LED drivers
Affordable Switching and Dimming
CX Panels provide feature rich and cost effective lighting control for maximum
energy savings. You can save up to 50% in labor and materials when used
in place of conventional time clock and contactor combinations. The use of
the Astronomical Clock in place of roof mounted photocells increases cost
savings, lowers maintenance, and improves reliability.
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 139
Auxiliary Inputs
Individual Mounted Relay Card
CX 8-Relay Panel Interior
CX Dimming Card
Dry Contact Outputs
auxiliary Input features• Provisions for multiple device
control of a single relay or group.
• Scenarios program allows for easy mapping of auxiliary inputs.
dry contact output features• Normally open or normally closed
output.• Momentary or maintained.• Allows for interconnection to other
building functions such as security, fire alarm, or building management system.
relay card features• 1-pole and 2-pole relays fit in the
same sized space.• Relay self-identifies once installed.• Available 20A/1P N/O, 20A/2P N/O
or N/C and 30A/1P latching.• 14K SCCR for 20A/1P N/O, 20A/2P
N/O or N/C.• 18K SCCR for 30A/1P latching.
cX dimming card features• Full range dimming with preset
dimming levels.• Ramp Up, Fade Down, Minimum
Dim Level.• Max Dim Level (Demand Response
System Settings)• Operates with 0-10V dimmable
ballasts.• Provides manual and automatic
control of dimming levels.• 8 Dimming channels per card.• Works with CAT5 switches.
The CX Series panels are self-contained lighting control systems. All inputs are low voltage and hard-wired to terminal blocks in the panel. Input power supply is multi-tapped or universal for typical service voltages. Line voltage terminals are located with generous space for easy connection.
PAgE 14 0 hubbell-automation.com
The Hubbell Building Automation CX Commercial Lighting Control Panels provide
feature-rich and cost-effective lighting control for maximum energy savings.
The LCD User interface is located in the door and utilizes simple and intuitive
scrolling menus to program, check status or update the panel. The easy-to-use
Pre-Programmed Scenarios Menu makes project commissioning simple and fast.
The CX Panels can save up to 50% in labor and materials when used in place of
conventional time clock and contactor combinations. The use of the astronomical
clock instead of roof-mounted photocells increases cost savings, lowers
maintenance, and improves reliability.
PRODUCT fEATURES
• Four Relay panel sizes – 4, 8, 16 and 24 relay spaces
• Relays – 20A/1P, N/O, 20A/2P, N/O (14K SSCR)
and 30A/1P latching (18K SCCR)
• Optional 0-10V Dimming
• LCD user interface with keypad
• 365 day programming with 64 schedules
• Astronomical and real time clock
• 6 programmable dry contact inputs for 4 relay panel
12 Programmable dry contact inputs for 8 relay panel
20 Programmable dry contact inputs for 16 relay panel
30 programmable dry contact inputs for 24 relay panel
• Selectable pre-programmed scenarios
• Programmable inputs accept low voltage switches, photocells,
or motion sensors
• Two low voltage dry contact output relays on 8, 16 and 24 relay panel
• Program uploads via removable SD memory card
• Listed to UL916, UL924 and cUL
• Five -year limited warranty
CX Lighting Control PanelsCX COMMERCIAL LIgHTINg CONTROL PANELS
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
CX16 and CX2416- and 24-Relay Panels
CX04 and CX084- and 8-Relay Panels
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 141
MODELcX CX Lighting
Control Panel
SPACES04 4 Relay
Spaces08 8 Relay
Spaces16 16 Relay
Spaces24 24 Relay
Spaces
INPUT vOLTAgE2 120/277V
Universal
3 347/480V
ENCLOSURES NEMA 1
Surface
RELAY QUANTITY00
04
08
16
24
No Relays - Spaces Only
4 Relays Installed
8 Relays Installed
16 Relays Installed
24 Relays Installed
RELAY TYPESP Space Only2N 20A
Electrically Held N/O 120-277V
3l Latching120-277-347V
tN 20A Electrically HeldN/O 208-480V
OPTIONSN Stand Alone
Panel
M Master Panel
S Secondary Panel (Note 4 & 5)
cX
general Specifications
Programming and Configuration Programmable via user interface mounted on door Fully programmable by users with door closed and locked Stand Alone, Master, or Secondary Panels. One Master and one Secondary may be connected as a system
Physical NEMA 1 surface enclosure Pre-drilled mounting holes for mounting to wall, KOs provided on top and bottom 4/8 relay and 16/24 relay enclosures with hinged locking door
Electrical Input 120/208/240/277VAC for 4/8 size 120-277VAC Universal for 16/24 size Standard 120/277/347 Optional
Operating Environment Location: NEMA 1 interior space Operating temperature: 0° to 50°C (32° to 112°F) Relative humidity (non-condensing): 10% to 90%
Certifications Listed to UL916, UL924 and cUL
Warranty Five-years limited
ordering Information
S
NOTES:
1. Required for CX04 Series Panels. Not Available for CX08, CX16, CX 24
2. Not available for CX04.
3. 2-Pole relays take the same amount of space as 1-Pole relays.
4. Installed relays must be all of the same type. Relay Type TC and 2C not available in fully populate panels
5. “00” option has no relays, all must be ordered separately and installed in the field.
6. Secondary panel includes (2) master/secondary panel interface cards.
CX04 and CX08 4- and 8-Relay Panels14.5” W x 17”H x 4” D
CX16 and CX24 16- and 24-Relay Panels20” W x 24”H x 4” D
PAgE 142 hubbell-automation.com
CXR2N 20A/1P Relay
CXR3L 30A/1P Relay
CX RelaysCX LIgHTINg CONTROL PANELS
PRODUCT fEATURES
The CX Panels have four types of available CXR relays. Each relay is individually
board-mounted and can be installed in any combination in the panel. Relays are
offered in a variety of types and ratings to meet any project requirements. Types
include electrically-held normally open (N/O), electrically-held normally closed
(N/C), and latching.
Ratings are 20A/1P 20A/2P, and 30A/1P. Pre-Configured Panels are available
with relays of the same type. Combinations of any relay type must be ordered
separately and field installed into Space Only standard panels. CXRTN & CXRTC 20A/2P Relays
• Relays are mounted to individual relay cards
• Four types of relays – 20A/1P, N/O and 20A/2P, N/O, N/C (14K SCCR) and
30A 1P latching (18K SCCR)
• Smart Relay card self-identifies type automatically to panel
• Each relay includes 1 programmable input for low voltage switches,
photocells, or motion sensors
• Panels are ordered fully populated with the same relay type or with space
only for field installation of relay combinations
• Relay cards include a plugging connector to panel motherboard and
a single screw to secure it to the panel enclosure
• Relay cards include a manual override control button and
LED status indication
• Listed to UL916 standard, UL924 and Canadian cUL
• Five-year warranty1.625”
5.5”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 14 3
ModEl
cXr
rElaY tYPE2N 20A 1-Pole Electrically Held N.O. 120-277V 14KSCCR @ 277VAC3l 30A 1-Pole Latching 120-277-347V 18KSCCR @ 277VAC, 14KSCCR @ 347VACtN 20A 2-Pole Electrically Held N.O. 480V 14KSCCR @ 480VACtc 20A 2-Pole Electrically Held N.C. 480V 14KSCCR @ 480VAC
cXr
Type Poles VAC Tungsten Flour. Ballast * HID Ballast Motor Rating120 15A 16A 20A 1 HP227 NA 16A 20A 3/4 HP120 20A 30A 30A 1 HP277 NA 30A 30A NA347 NA 20A 20A NA 14K Amps
CXRTN - Elect Held, N.O. 2 480 NA 20A 20A 2 HPCXRTC - Elec Held, N.C. 2 480 NA 20A 20A 2HP
14K Amps
18K Amps
14K Amps
CXR3L- Latching 1
* Electronic Flourescent Ballast Rating is 16A
Characteristics Load Ratings SCCR Rating
CXR2N- Elec Held , N.O 1
ordering Information
general Specifications
Physical Mounts inside NEMA 1 surface panel enclosure Pre-drilled mounting hole for securing relay cards Individual relay cards – 1P and 2P are equal in size
Operating Environment Location: interior space Operating temperature: 0°–50°C (32°–112°F) Relative humidity (non-condensing): 10%–90%
Certifications Certified to UL 916, UL 924 and cUL
Warranty Five-year limited
relay Specifications
†
†
† Suitable for use at 208V, 240V and 480V
PAgE 14 4 hubbell-automation.com
CX Dimming Option Card
The CX Dimming Option Card provides 0-10V dimming through any HBA
CX Lighting Control Panel. This provides a low cost solution for lighting control
challenges such as more stringent energy codes, demand response requirements,
and LEED qualification while providing additional energy saving capabilities
through the use of full range dimming.
The CX Dimming Option Card provides 0-10V dimming control for LED electronic
dimming drivers and fluorescent electronic dimming ballasts. The Dimming
Channels may be configured to work in concert with Photo Cells, Occupancy
Sensors and Schedules in addition to manual Raise Lower Switches.
PRODUCT fEATURES
• Full range dimming with Preset dimming levels
• Ramp Up, Fade Down, Minimum Dim Level
• Max Dim Level (Demand Response System Settings)
• Operates with 0-10V drivers and dimmable ballasts
• Provides manual and automatic control of dimming levels
CXDIMCONTRBD
general Specifications
Power Requirements Low Voltage via CX Panel Option Port
Output (Low Voltage Sensors) Eight 0-10V Dimming Channels 0-10V Screw terminals. #16 solid or stranded copper wire. 0-10V output 30mA per channel Four RJ45 Connections for discrete RJ45 Zone 5 Switches
Panel Dimming Option Card Capacity CX04/CX08 1 CX Dimming Option Card CX16 Up to 2 CX Dimming Options Cards
CX24 Up to 3 CX Dimming Option Cards
User Interface LCD Color Display via CX Panel Supports Zone 5 RJ45 Switches
Warranty Five-year limited
cXdIMcoNtrbd
MODELCXDIMCONTRBD CX Panel 8-Channel
Dimming Controller Option Board
ordering Information
• Upgrade option to Existing and New CX Panels
• 8 Dimming Channels per card
• Works with Zone5 Switches
• Five-year warranty
CX LIgHTINg CONTROL PANELS
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 14 5
general Specifications
Electrical Ratings Each switch: 100mA @ 30VDC Max Each pilot LED: 18-30VDC, internal 2.2kohm, ½ Watt resistor
Configurations 1 - 4 buttons, with or without pilot LED Momentary or latching (sustained)
Operating Environment Indoor use only Operating temperature: 32° to 122°F (0° to 50°C) Relative humidity (non-condensing): 10% to 90%
Construction Housing – Rugged, high-impact, injection-molded plastic Color-coded leads
Dimensions 1.88”W x 4.25”H x 1.56”D
Weight 3.0 oz
Color White, Ivory, Light Almond, Gray
Mounting Single-gang NEMA-style switch box (average switch box) Decorator-style wall plate not included
Warranty Five-year limited
LVSM1NP LVSM1PL
MODELlVS
lVS
SWITCH TYPEM Momentaryl Latching
PILOTPl w/ Pilot LEDSNP No Pilot
NUMBER Of BUTTONS 12
3
4
COLORWH White
IV Ivory
la Light Almond
g Gray
Hubbell Building Automation’s CX Low Voltage Wall Switches are designed
for virtually any area. The soft contours of its architecturally pleasing design fit
easily into any décor. Switches are available in both momentary and latching
versions and feature multiple button configurations making them the perfect
switch solution for use with HBA’s CX Commercial Lighting Control Panels.
PRODUCT fEATURES
• Attractive, architecturally pleasing design
• Momentary and latching versions available
• 1-4 buttons with or without LED
• Mounts to standard single-gang box
• Title 24 compliant when used as part of compliant system
• Five-year limited warranty
ordering Information
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
CX Low voltage SwitchesCX LIgHTINg CONTROL PANELS
PAgE 14 6 hubbell-automation.com
LUXSTATLS
CX Light Sensor
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
24VDC
LOW
VOLTAGE
The CX Light Sensor by Servodan provides the necessary daylight-level information
to the CX Panel System. Using a photodiode element, this sensor continuously
measures daylight levels and sends the information to the selected Luxstat daylight
harvesting control module. In order to operate as a true Open Loop controller, the
sensor must be positioned to see only daylight (no artificial light). You select the
applicable foot-candle range by using a jumper beneath the front cover.
PRODUCT fEATURES
• Daylight sensor for CX Panel Systems
• Architecturally attractive design
• Indoor and outdoor versions
• Open loop operation
• Foot-candle range: 3-6,000 fc
• Mounts vertically or horizontally
• UL and cUL listed
• California Title 24 Compliant
• Five-year limited warranty
DAYLIGHTHARVESTING
2”
1.2”
CX LIgHTINg CONTROL PANELS
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 147
MODELluXStatlS Luxstat Light Sensor - Indoor
luXStatlSo Luxstat Light Sensor - Outdoor
ordering Information
general Specifications
Electrical Four jumper-selectable foot-candle ranges: .03-30FC; 3-300FC; 30-3,000FC; 60-6,000FC 24VDC Low Votage Class 2 Device 3-conductor 22 AWG twisted cable—equal to Belden 8443
Construction Protective hard plastic cover and housing
Dimension 2”DIA x 1.2”H
Weight 0.5 oz
Certifications UL and cUL listed
Warranty Five-year limited
45º
30º
30º
PAgE 14 8 hubbell-automation.com
The Hubbell Building Automation Line V Automatic Line Voltage Switches
provide feature cost effective lighting control for maximum energy savings. The
switches operate based on timed blink patterns from the CX or LX Panels to
activate internal relays ON, OFF or override an impending OFF schedule for user
selectable periods of 30, 60, 90, or 120 minutes. The CX or LX Panels are designed
to control the relay timed blinks to allow for a single relay to
signal multiple Line V switches to perform the desired functions.
The 1-Relay version has standard capability to be wired to addition switches for
3-way and 4-way operation on a single zone. The 2-Relay version allows for bi-level
switching within a single zone. Signal ON can be selected for 1 or 2 relays.
• Two switch configurations – 1-Relay and 2-relay
• 1-Relay model controls a single zone or can be connected for 3-way
and 4-way operation
• 2-Relay model provides single circuit input for dual level area control
• Switches are controlled ON or OFF from the CX Panel using OFF intervals
from a single relay
• Allows for retrofit of standard line voltage toggle switches for automatic
schedule ON/OFF control
• Blink warning allows user to initiate override of 30, 60, 90, or 120 minutes and
cancel OFF event
• Switches operate without the need for a neutral connection
• Dual 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• ETL, UL, and cUL listed
• California Title 24 compliant
• Five-year limited warranty
PRODUCT fEATURES
LINEVAS1BUNVWH LINEVAS2BUNVWH
CX Line v Automatic Line voltage SwitchesCX LIgHTINg CONTROL PANELS
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
4.29”
2.1”
1.8”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 149
general Specifications
Programming and Configuration Programmable via DIP switches mounted on door All control functions are issued at the switch
Relays Configurations 1-Relay – Single Zone OR 3-Way/4-Way operation 2-Relays – Single circuit input for Bi-Level Control
Power Requirements 120/277VAC; 50/60Hz
Electrical Ratings 120VAC: 5.0 Amps Tungsten; 10.0 Amps Fluoresent; 1/3 HP 277VAC: 10.0 Amps Fluorescent; 1/6 HP
Load Requirements None
Operating Environment Indoor use only Operating temperature: 32°–104°F (0°–40°C) Relative humidity (non-condensing): 0%–95%
Construction Casing—high-impact injection-molded plastic (UL-94-5V) Color-coded leads are 6” long
Dimensions 4.2”L x 1.8”D x 2.1”W; .37” extension
Weight 2.9 oz.
Color White; Ivory; Light Almond; Gray; Black
Mounting Single-gang NEMA-style switch box (average switch box) Decorator-style wall plate not included
Certifications ETL, UL, and cUL listed
Warranty Five-year limited
lINEVaS1buNVbk Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Black
lINEVaS1buNVgY Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Gray
lINEVaS1buNVIV Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Ivory
lINEVaS1buNVla Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way Light Almond
lINEVaS1buNVWH Line V 120-277VAC Automatic Switch, 1-Button, Single Relay, Single or 3-Way White
lINEVaS2buNVbk Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Black
lINEVaS2buNVgY Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Gray
lINEVaS2buNVIV Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Ivory
lINEVaS2buNVla Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single Light Almond
lINEVaS2buNVWH Line V 120-277VAC Automatic Switch, 2-Button, Dual Relay, Single White
ModEl/dEScrIPtIoN
ordering Information
PAgE 150 hubbell-automation.com
LODT
ordErINg INforMatIoN
Consult the Occupancy/Vacancy Section for detailed specifications, application guidelines and product ordering.
OMNIDT2000
The OMNI line of occupancy and vacancy sensors are available in Ultrasonic,
Infrared and Multi-Tech (combines ultrasonic (US) and passive infrared (PIR))
to turn lighting on and off based on occupancy. This family of sensor features
Hubbell Building Automation’s patented IntelliDAPT technology, which makes all
the sensor adjustments automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled
area and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
CX Occupancy SensorsCX LIgHTINg CONTROL PANELS
The LightOWLTM Dual Technology Ultrasonic and Passive Infrared Sensor
combines ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on
and off based on occupancy. Designed specifically for areas where ceiling sensors
are not appropriate, this sensor features Hubbell Building Automation’s patented
IntelliDAPT technology, which makes all the sensor adjustments automatically.
Throughout the product’s lifespan, IntelliDAPT software analyzes the controlled
area and makes digital adjustments to sensitivity and timer settings. Occupancy
sensors with IntelliDAPT provide a maintenance-free install-and-forget operation.
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 151
CX Lighting Control SwitchesCX LIgHTINg CONTROL PANELS
The HBA CX Lighting Control Switches provide manual control. The system
consists of two types of switches – a Dimming Control Switch and a Master On/
Off Control Switch.
The Dimmning Control switches enables users to raise and lowers light levels. The
Master/Row Control switches turn all lighting ON or OFF.
PRODUCT fEATURES
• Attractive, architecturally pleasing design
• Raise/ Lower Dimming control
• Master ON/OFF control
• Mount to standard single or multi-gang wall boxes
• Five-year warranty
1.6”
4.2”
1.4”
Z5-SW-MC
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
ordering Information
LIgHTINg CONTROL SWITCHESAND CABLES
Z5-SW-aVd CX Dimming Switch, WhiteZ5-SW-Mc CX Master On/Off Switch, White
Wireless lighting controls
PAgE 152
INTUITIVE NETWORK TECHNOLOGY
• Peer-to-peer: All devices are peers and act as
repeaters, forwarding messages to ensure
message delivery
• Self-organizing: Network automatically builds
itself
• Self-healing: Messages automatically reroute
around failed nodes
NETWORK PROTOCOL
• SNAP (Synapse Network Appliance Protocol)
RADIO FREQUENCY
• 902-928 MHz (robust and reliable) ISM band. FCC
Part 14 Certified
• Spread Spectrum Frequency Hopping
• Supported distance between wireless devices:
100 meters
INTELLIGENT SMARTPORTS
• Plug-and-play support for wiHUBB occupancy
sensors, daylight sensors and switch stations.
• Automatically and intelligently provides the most
energy-efficient operation
SECURITY
• Wired: HTTPS/SSL – The wiHUBB Access Point
connects the client browser and wiHUBB network
using Secure Socket Layer (SSL) protocol, the
standard for web security authentication.
The wiHUBB® Distributed Lighting Control system wirelessly controls indoor
and outdoor applications including area/site lighting, parking garage lighting,
and interior facility lighting. It is simple to install and configure, and provides a wireless network that can grow and change
with your building’s needs. While installation of wired systems can be complicated and expensive, wiHUBB is simple to use,
requiring minimal installation time and wiring costs. wiHUBB’s future proof design features a self-organizing and self-healing
wireless mesh network.
Wireless Comes to Light®
WIRELESS COMES TO LIgHT®
®
(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 153
PAgE 154 hubbell-automation.com
WIH-AP
wiHUBB® Access PointWIRELESS LIgHTINg CONTROLS
Hubbell Building Automation’s wiHUBB® Access Point is a user friendly, web-
based device for commissioning and managing up to 100 devices within the
wiHUBB wireless mesh network. The wiHUBB Access Point’s integrated web server
provides access to the wiHUBB network using any standard web browser – no
special client side PC software required.
The intuitive and easy to use Graphical User Interface (GUI) provides building
owners and facility managers with the ability to schedule and control individual
wiHUBB-enabled devices or groups of devices.
PRODUCT fEATURES
• Web-based commissioning and monitoring of the wiHUBB
lighting control system
• Integrated web server provides connection via standard web browsers
• Easy system access from the local network or Internet
• Intuitive and easy-to-use Graphical User Interface (GUI)
• Ability to schedule wiHUBB-enabled devices or groups of devices via
standard or astronomical time functions
• Provides On/Off and dimming control of wiHUBB-enabled devices
and groups of devices
• View power consumption from each device
• Robust & reliable 900Mhz wireless self-organizing and self-healing
mesh network
• FCC certified
• Five-year limited warranty
5”
7.5”
902 - 928MHzFrequencyAntenna
WIRELESS
WIRELESS COMES TO LIgHT®
®120VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 155(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
ModEl / dEScrIPtIoN
WIH-aP wiHUBB Access Point
ordering Information
general Specifications
wiHUBB Network Size Supports up to 100 wiHUBB devices. For larger network use wiHUBB Access Point 2.0 (WIH-AP2)
Power Requirements 120VAC - Plug-in power adapter included
RF Frequency 902 - 928MHz Wireless Peer-To-Peer, Self-Organizing and Self-Healing Mesh Network Spread Spectrum Frequency Hopping
RF Range Supported distance between wireless devices: 100 meters (328 feet) Maximum Transmission Output Power: +20 dBm Maximum Receive Sensitivity: -118 dBm
Operating Environment Operating Temperature: 0°C to 40°C (32°F to 104°F) Relative humidity (non-condensing): 0 to 95%
Construction Housing: Flame retardant ABS plastic, UL flame rating of 94-5VA
Dimensions 5.00”L x 7.50”W x 1.75”H
Weight 6oz
Color Black
Mounting Surface or Wall Mount
Patents Patent(s) Pending
Certifications FCC Certified IC Approved
Warranty Five-year limited
Device Settings
WIH-aP
PAgE 156 hubbell-automation.com
WIH-AP2
wiHUBB® Access Point 2.0WIRELESS LIgHTINg CONTROLS
Hubbell Building Automation’s wiHUBB® Access Point 2.0 is a user friendly, web-
based device for commissioning and managing hundreds of devices within the
wiHUBB wireless mesh network. The wiHUBB Access Point’s integrated web server
provides access to the wiHUBB network using any standard web browser – no
special client side PC software required. The intuitive and easy to use Graphical
User Interface (GUI) provides building owners and facility managers with the ability
to schedule and control individual wiHUBB-enabled devices or groups of devices.
PRODUCT fEATURES
• Web-based commissioning and management of the
wiHUBB system
• Integrated web server provides connection via standard
web browsers
• Easy system access from the local network or Internet
• Intuitive and easy to use Graphical User Interface (GUI)
• Ability to schedule wiHUBB-enabled devices or groups
of devices
• Provides On/Off and dimming control of wiHUBB-enabled
devices and groups of devices
• View power consumption from each device
• Robust & reliable 900Mhz wireless self-organizing and
self-healing mesh network
• FCC certified
2.44”
7.5”
8.26”
902 - 928MHzFrequencyAntenna
EthernetPorts
120VAC Power Adapter
WIRELESS COMES TO LIgHT®
®
WIRELESS
120VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 157(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
Device Settings
general Specifications
wiHUBB Network Size Supports over 100 wiHUBB devices
Power Requirements 120VAC - Plug-in power adapter included
RF Frequency 902 - 928MHz Wireless Peer-To-Peer, Self-Organizing and Self-Healing Mesh Network Spread Spectrum Frequency Hopping
RF Range Supported distance between wireless devices: 100 meters (328 feet) Maximum Transmission Output Power: +20 dBm Maximum Receive Sensitivity: -118 dBm
Operating Environment Operating Temperature: 0°C to 40°C (32°F to 104°F) Relative humidity (non-condensing): 0 to 95%
Construction Housing: Metal enclosure
Dimensions Size: 8.26”L x 7.55”W x 2.44”H
Weight 3lb 6oz
Color Black
Patents Patent(s) Pending
Certifications FCC Certified
IC Approved
Warranty Five-year limited
MODEL WIH-aP2 wiHUBB Access Point 2.0
WIH-aP2
ordering Information
PAgE 158 hubbell-automation.com
WIH-SP-2RD-1277
wiHUBB® Smart PackWIRELESS LIgHTINg CONTROLS
PRODUCT fEATURES
• Single or dual relay versions for On/Off or High/Low control
• Optional 0 – 10V interface for full range dimming control
• Plug-and-play support for wiHUBB occupancy sensors,daylight
sensors and switch stations
• Device intelligently and automatically responds to sensors
and switches in the most energy- efficient manner
• Schedules are held in the devices themselves – no need
for a master scheduling device
• Retains data during power outages
• Robust & reliable 900MHz wireless self-organizing and self-healing
mesh network
• Future-proof design – firmware updateable over the air
• FCC certified
• Five-year limited warranty
Hubbell Building Automation’s wiHUBB® Smart Pack is a self-contained intelligent
wireless power pack. It contains either one or two independently controlled outputs.
The two output version can be used for High/Low or alternate circuit switching.
An optional 0-10VDC output is also available for full range dimming control of dimmable
ballasts and LED drivers. Each wiHUBB Smart Pack can control one or more circuits and
can be individually controlled or grouped with other wiHUBB devices.
The wiHUBB Smart Pack also features SmartPORT technology that provides plug-
and-play support for wiHUBB occupancy sensors and manual control switches.
When devices are plugged into the SmartPORTs, the Smart Pack automatically and
intelligently responds to the devices to provide the most energy-efficient operation.
The wiHUBB Smart Pack communicates via 900MHz radio frequency to other devices
within the wiHUBB wireless self-organizing and self-healing mesh network.
1.3”
5.75”
3.85”900MHZRadio Antenna
Plug and Play SmartPORTs
WIRELESS0-10V
DIMMING
WIRELESS COMES TO LIgHT®
®120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 159(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
900MHZRadio Antenna
OUTPUT1r 1 SPST Output
1rd 1 SPST Output, 0-10VDC Dimming Output
2r 2 SPST Outputs
2rd 2 SPST Outputs, 0-10VDC Dimming Output
INPUT vOLTAgE1277 120/2777VAC
MODELWIH-SP
general Specifications
Electrical Ratings Input: 120/277VAC, 20A Max, 60Hz Output*: 20A, Tungsten, 120VAC only 20A, Magnetic Ballast 16A, Electronic Ballast 1 H.P. Motor @120V, 3/4 H.P. @277V *For (2) relay models the maximum combined output of both relays: 20A
Low Voltage Ports:
Class 2 24VDC, 150mA MAX (all outputs combined)
Optional Dimming Interface 0-10V, 30mA output For use with low-voltage, two-wire dimming ballast and LED drivers.
RF Frequency 902 - 928MHz Wireless Peer-To-Peer, Self-Organizing and Self-Healing Mesh Network Spread Spectrum Frequency Hopping
RF Range Supported distance between wireless devices: 100 meters (328 feet) Maximum Transmission Output Power: +20 dBm Maximum Receive Sensitivity: -118 dBm
Operating Environment Operating Temperature: 0°C to 40°C Relative humidity (non-condensing): 0 to 95%
Construction Housing: GSM UL Rated 94 HB Plastic
Plenum Rated Complies with requirements for use in a plenum area Plenum rated for external junction box mounting
Dimensions 5.75”L x 3.85”W x 1.30”H
Weight 4 oz
Color Gray
Mounting Mounts directly to an external junction box through an extended ½” chase nipple.
Patents Patent(s) Pending
Certifications Conforms with UL916 and Certified to CAN/CSA C22.2 No. 205-M1983 FCC Certified IC Approved
Warranty Five-year limited
ordering Information
WIH-SP 1277
PAgE 16 0 hubbell-automation.com
WIH-OS-OMDT2
WIH-OS-LODT
Hubbell Building Automation’s wiHUBB® Ceiling Mount and Wall Mount
Occupancy Sensors employ passive infrared, ultrasonic, and acoustic sensing
technologies to turn lighting on and off based on occupancy. These sensors
represent the state-of-the-art in sensor technology and are designed to provide
accurate turn-on while virtually eliminating false-offs.
The sensors feature Hubbell Building Automation’s patented IntelliDAPT®
technology, which makes all the sensor adjustments automatically. Throughout the
product’s lifespan, smart software analyzes the controlled area and makes digital
adjustments to sensitivity and timer settings. Occupancy sensors with IntelliDAPT
provide a maintenance-free install and forget operation. All wiHUBB Occupancy
Sensors provide plug-and-play integration with the wiHUBB Smart Pack.
PRODUCT fEATURES
• IntelliDAPT® self-adaptive technology – no manual adjustment required
• All-digital dual technology (ultrasonic [US] and passive infrared [PIR]) sensor
• Non-volatile memory for sensor settings
• 500 to 2,000 square-foot coverage area (based on model)
• Optional Isolated Form C relay with N/O + N/C outputs
• Plug and play integration with wiHUBB Smart Pack
• UL and cUL listed
• Five-year limited warranty
wiHUBB® Ceiling Mount and Wall Mount SensorsWIRELESS LIgHTINg CONTROLS
IntelliDAPTOCCUPANCY
SENSING
WIRELESS COMES TO LIgHT®
®TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 161(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
oMdt2 Ceiling Mount, PIR and Ultrasonic, 2000 Sq. Ft. oMdt2r Ceiling Mount, PIR and Ultrasonic, 2000 Sq. Ft., Form C RelayoMdt1 Ceiling Mount, PIR and Ultrasonic, 1000 Sq. Ft. oMdt1r Ceiling Mount, PIR and Ultrasonic, 1000 Sq. Ft., Form C RelayoMdt5 Ceiling Mount, PIR and Ultrasonic, 500 Sq. Ft. oMdt5r Ceiling Mount, PIR and Ultrasonic, 500 Sq. Ft., Form C RelayoMuS2 Ceiling Mount, Ultrasonic, 2000 Sq. Ft. oMuS2r Ceiling Mount, Ultrasonic, 2000 Sq. Ft., Form C RelayoMuS1 Ceiling Mount, Ultrasonic, 1000 Sq. Ft. oMuS1r Ceiling Mount, Ultrasonic, 1000 Sq. Ft., Form C RelayoMuS5 Ceiling Mount, Ultrasonic, 500 Sq. Ft. oMuS5r Ceiling Mount, Ultrasonic, 500 Sq. Ft., Form C RelayoMIr Ceiling Mount, Passive Infrared, 450 Sq. Ft.oMIrr Ceiling Mount, Passive Infrared, 450 Sq. Ft., Form C RelayoMIrl Ceiling Mount, Passive Infrared, 1500 Sq. Ft.oMIrlr Ceiling Mount, Passive Infrared, 1500 Sq. Ft., Form C RelayoMdIa Ceiling Mount, PIR and Acoustic, 450 Sq. Ft.oMdIar Ceiling Mount, PIR and Acoustic, 450 Sq. Ft., Form C Relaylodt Wall Mount, PIR and Ultrasonic, 1600 Sq. Ft.lodtr Wall Mount, PIR and Ultrasonic, 1600 Sq. Ft., Form C RelayloIrWV Wall Mount, Passive Infrared, 2500 Sq. Ft. loIrWVr Wall Mount, Passive Infrared, 2500 Sq. Ft., Form C RelayloIrHb Wall Mount, Passive Infrared, 50’ at 30’ Height loIrHbr Wall Mount, Passive Infrared, 50’ at 30’ Height, Form C RelaylodIa Wall Mount, PIR and Acoustic, 1600 Sq. Ft.lodIar Wall Mount, PIR and Acoustic, 1600 Sq. Ft., Form C Relay
WIH-oS
ModEl SENSor tYPE
ordering Information
WIH-oS
general Specifications
IntelliDAPT Technology Auto reset from test setting Self-adjusting timer Self-adjusting ultrasonic and passive infrared thresholds Automatic false-on, false-off corrections
LED Indicators Red: motion detected by Passive Infrared sensing technology Green: motion detected by Ultrasonic sensing technology
Timer Timeout Automatic mode: 8-30 min. (self-adjusts based on occupancy) Test mode: 8 seconds (for an easy check at installation)
Ultrasonic Output Maximum amount of radiation output allowed: 115dB @ 1 ft. from source Frequency: 32.768kHz or 40kHz (based on model)
Passive Infrared Dual element pyrometer and 12 element cylindrical rugged lens
Form C Relay Relay: NO + NC contacts, SPDT, 500 mA rated @ 24VDC, three wire, isolated relay
Coverage Ceiling mount sensor: 500 sq. ft. (Major motion) / 250 sq. ft. (Minor motion) to 2000 sq. ft. (Major motion) / 1000 sq. ft. (Minor motion) –(based on model) Wall mount sensor: 1600 sq. ft. (Major motion) / 800 sq. ft. (Minor motion)
Power Requirements Powered by wiHUBB Smart Pack SmartPORT using plenum rated CAT5 cables (ordered separately)
Operating Environment Indoor use only Operating Temperature: 0°C to +40°C Relative humidity (non-condensing): 0 to 95%
Construction Casing – rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UV-945VA) flame class rating, UV inhibitors
Color Off White
Mounting Mounting base provided Recommended MAX mounting height: 12 ft.
Patents U.S. Patents: 6151529, 5946209, 5699243, 5640143, 6415205, 6078253, D404326, 6222191, 5986357, 6759954 Patent(s) Pending
Certifications UL and cUL listed
Warranty Five-year limited
PAgE 162 hubbell-automation.com
WIH-SW-OO
WIH-SW-HLO WIH-SW-ORLO
wiHUBB® Switch StationsWIRELESS LIgHTINg CONTROLS
WIH-SW-PRESET
WIH-SW-GAV WIH-SW-RL
PRODUCT fEATURES
• Attractive, architecturally-pleasing decorator style design
• Multiple switch options available
• All switches mount to standard single or multi-gang wall boxes
• Plug-and-play integration with wiHUBB Smart Pack
• Five-year limited warranty
WIH-SW-TO
Hubbell Building Automation’s wiHUBB® Switch Stations provide manual control
of the wiHUBB System. The wiHUBB Switch Stations include an On/Off switch,
a High/Low/Off switch for multiple level lighting control, an On/Raise/Lower/
Off switch, a 4-button Preset switch for scene control, a General–A/V switch that
enables users to switch between General Lighting and Audio/Visual Lighting, a
Raise/Lower dimmer switch and a Timed On switch. All wiHUBB Switch Stations
provide plug-and-play integration with the wiHUBB Smart Pack.
On/Off Switches
1.6”
4.2”
1.4”
Fits Standard Decorator Style Wallplate (sold separately)
24VDC
LOW
VOLTAGEWIRELESS COMES TO LIgHT®
®
PAgE 163(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
SWItcH tYPEoo On/Off SwitchHlo High/Low/Off Switchorlo On/Raise/Lower/Off SwitchPrESEt Preset/Scene Switch (4-button)gaV General – A/V Mode Switchrl Raise/Lower Switchto Timed On Switch
colorWH White
IV Ivory
la Light Almond
gY Gray
bk Black
ModElWIH-SW
general Specifications
Power Requirements Powered by wiHUBB Smart Pack SmartPORT using plenum rated CAT5 cables (ordered separately)
Operating Environment Indoor use only Operating Temperature: 0°C to 40°C Relative humidity (non-condensing): 0 to 95%
Construction Housing – Rugged, high impact, injection molded plastic
Dimensions 4.2”L x 1.6”W x 1.4”D
Weight 1.6 oz
Color White, Ivory, Light Almond, Gray, and Black
Mounting Switches may be mounted individually in a single gang switch box or ganged together in a multi-gang switch box Decorator-style wall plates available separately
Patents Patent(s) Pending
Warranty Five-year limited
ordering Information
WIH-SW
PAgE 16 4 hubbell-automation.com
WIH-IM-1RDFF-1277
wiHUBB® In-fixture ModuleWIRELESS LIgHTINg CONTROLS
PRODUCT fEATURES
• Single or dual relay versions for On/Off or High/Low control
• Optional 0 – 10V interface for full range dimming control
• Device intelligently and automatically responds to sensors and
switches in the most energy-efficient manner
• Schedules are held in the devices themselves – no need for a
master scheduling device
• Monitors, measures, and records energy consumption and
runtime data
• Retains data during power outages
• Robust & reliable 900MHz wireless self-organizing and self-healing
mesh network
• Future-proof design – firmware updateable over the air
• Multiple antenna options available
• FCC certified
• Five-year limited warranty
Hubbell Building Automation’s wiHUBB® In-Fixture Module (IFM) is a self-contained
intelligent wireless control module. It contains either one or two independently-
controlled outputs. The two-output version can be used for High/Low or alternate
ballast switching.
An optional 0-10V output is also available for full-range dimming control of
dimmable ballasts and LED drivers. Each wiHUBB IFM can control one or more
fixtures and can be individually controlled or grouped with other wiHUBB devices.
The wiHUBB IFM communicates via 900MHz radio frequency to other devices
within the wiHUBB wireless self-organizing and self-healing mesh network.
1.08”
5.5”
4.5”
1.27”
WIRELESS0-10V
DIMMING
WIRELESS COMES TO LIgHT®
®120277
VAC
347VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 16 5(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
outPut1ra 1 SPST Output, Articulating Antenna1rda 1 SPST Output, 0-10VDC Dimming Output, Articulating Antenna1rf 1 SPST Output, Fixed Antenna with 24” Extension Cable1rdf 1 SPST Output, 0-10VDC Dimming Output, Fixed Antenna with 24” Extension Cable2ra 2 SPST Outputs, Articulating Antenna 2rda 2 SPST Outputs, 0-10VDC Dimming Output, Articulating Antenna2rf 2 SPST Outputs, Fixed Antenna with 24” Extension Cable2rdf 2 SPST Outputs, 0-10VDC Dimming Output, Fixed Antenna with 24” Extension Cable
INPut VoltagE1277 120/277VAC347 347VAC
ModElWIH-IM
accessory
accESSorYadaPtEr In-Fixture Module J-Box
Mounting Adapter
general Specifications
Electrical Ratings (-1277 version) Input: 120-277VAC, 10A Max, 60Hz Output: 10A, Tungsten, 120VAC only 10A, Magnetic Ballast 5A, Electronic Ballast (max each relay) ¼ H.P. Motor, 120 & 277VAC For (2) relay models the maximum combined output of both relays: 10A
Electrical Ratings (-347 version) Input: 347VAC, 10A Max, 60Hz Output: 10A, Ballast For (2) relay models the maximum combined output of both relays: 10A
Optional Dimming Interface 0-10V, 30mA output for use with low-voltage, two-wire dimming ballast and LED drivers.
RF Frequency 902 - 928MHz Wireless Peer-To-Peer, Self-Organizing and Self-Healing Mesh Network Spread Spectrum Frequency Hopping
RF Range Supported distance between wireless devices: 100 meters (328 feet) Maximum Transmission Output Power: +20 dBm Maximum Receive Sensitivity: -118 dBm
Operating Environment Operating Temperature: -40°C to +90°C Relative humidity (non-condensing): 0 to 95%
Construction Housing: GSM UL Rated 94 HB Plastic
Dimensions 5.50”L x 1.27”W x 1.08”H
Weight 4 oz
Color Gray
Mounting Mounts inside fixture ballast cavity or housing Optional mounting adaptor available (p/n WIH-IM-ADAPTER) for external junction box mounting
Certifications Conforms with UL916 and Certified to CAN/CSA C22.2 No. 205-M1983 FCC Certified IC Approved
Warranty Five-year limited
ordering Information
WIH-IM
ModElWIH-IM
WIH-IM adaPtEr
PAgE 16 6 hubbell-automation.com
WIH-OM-UNV
wiHUBB® ON-fIXTURE MODULEWIRELESS LIgHTINg CONTROLS
Hubbell Building Automation’s wiHUBB® On-Fixture Module (OFM) is a self-
contained intelligent wireless control module that provides On/Off lighting control
for outdoor fixtures.
Each OFM contains an integrated daylight sensor that can be used to turn lighting
ON or OFF based on the amount of natural light available. Each wiHUBB On-
Fixture Module can be individually controlled or grouped with other wiHUBB
devices. The wiHUBB OFM communicates via 900MHz radio frequency to other
devices within the wiHUBB wireless self-organizing and self-healing mesh network.
PRODUCT fEATURES
• On/Off outdoor lighting control
• Compatible with all lighting loads including LED drivers
• Integrated daylight sensor
• Schedules are held in the devices themselves –
master scheduling device not necessary
• Retains device settings during power outages
• Robust & reliable 900MHz wireless self-organizing
and self-healing mesh network
• FCC certified
• Five-year limited warranty
2.275”
3.50”
Twist Lock Plug
902 - 928MHzFrequency Antenna
Photocell
UV Stabilized Material
WIRELESS
WIRELESS COMES TO LIgHT®
®
120347VAC
480VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 167(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
general Specifications
Electrical Ratings Input: - WIH-OM-UNV:120-347VAC, 50/60Hz - WIH-OM-480: 480VAC, 50/60Hz Output: 20A, Tungsten, Magnetic and Electronic Ballast
RF Frequency 902 - 928MHz Wireless Peer-To-Peer, Self-Organizing and Self-Healing Mesh Network Spread Spectrum Frequency Hopping
RF Range Supported distance between wireless devices: 100 meters (328 feet) Maximum Transmission Output Power: +20 dBm Maximum Receive Sensitivity: -118 dBm
Daylight Sensor ON Level: 1 FC to 5 FC (Default: 5FC) OFF Level: 4 FC to 15 FC (Default: 8FC) ON/OFF Delay Times: 0-120 secs (Default: 60 secs)
Operating Environment Operating Temperature: -40°C to +90°C (-40°F to +194°F)
Construction Housing: GSM UL Rated 94 HB Plastic
Dimensions 3.50”DIA x 2.275”HWeight 4 oz
Color Smoked Plastic Housing
Mounting Standard twist lock photo-sensor receptacle
Patents Patent(s) Pending
Certifications Conforms with UL916 and Certified to CAN/CSA C22.2 No. 61010-1-04 FCC Certified IC Approved
Warranty Five-year limited
INPUT vOLTAgEuNV 120-347VAC, 50/60Hz480 480VAC, 50/60HZ
MODELWIH-oM
WIH-oM
ordering Information
PAgE 168 hubbell-automation.com
WIH-BAS-M
wiHUBB® Building Automation System gateway InterfaceWIRELESS LIgHTINg CONTROLS
Hubbell Building Automation’s wiHUBB® Building Automation System (BAS)
Gateway Interface is an external, high performance, low cost, multi-protocol
gateway for providing control and access from building automation systems to
HBA’s wiHUBB Wireless Lighting Control System. The device provides protocol
translation between wiHUBB and BAS devices using BACnet®, Metasys® N2 by
JCI, and Modbus™. The wiHUBB BAS Gateway is based on the industry leading
FieldServer Technologies™ ProtoCessor ProtoNode technology and is pre-
configured with the wiHUBB system protocol interface.
PRODUCT fEATURES
• Web browser based programming
• Intuitive and easy to use Graphical User Interface (GUI)
• Device is field selectable for specific BAS protocol
• Sophisticated user account/password manager
• Integrates wiHUBB lighting control systems and Building Automation Systems (BAS)
• Supports BACnet®, Metasys® N2 by JCI, Modbus™ and LonWorks® protocols
• Automatically generates all required control points and documentation for
integration with the selected protocol
• Five-year limited warranty
4.52”
3.25”
1.6”
EthernetPort
WIRELESS COMES TO LIgHT®
®TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 169(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODEL WIH-baS
WIH-baS
ordering Information
general Specifications
Supported wiHUBB® Access Point Access Point 2.0 required (Ordered Separately)
Supported Serial (RS-485) Protocols BACnet MS/TP Modbus RTUSupported Ethernet Protocols BACnet IP Modbus TCP/IP
JCI Metasys® N2OPEN
Supported Electrical Connections (1) 6 pin Phoenix Connector (1) RS-485 +/- Ground port Power +/- Frame Ground port (1) Ethernet -10/100 Ethernet port
(1) FTT-10 LonWorks® port (LonWorks® Version)
Power Requirements 9-30 VDC or 12-24VAC
Current draw @ 12V = 240 mA
Operating environment Indoor use only -40°C to 75°C (-40°F to 167°F) Relative humidity (non-condensing): 5% to 90%
Dimensions 4.52”L x 3.25”W x 1.60”H
Approvals BACnet Testing Labs (BTL) B-ASC LonMark 3.4 Certified – WIH-BAS-L Version TUV approved to UL 916 standard and CSA C22-2 RoHS Compliant DNP3 Conformance Tested OPC Self Certified to Compliance CE & FCC Approved
Warranty Five-year limited
MODEL M wiHUBB Building Automation
System Gateway Interface for Multi-Protocols - BACNET, Modbus, N2
l wiHUBB Building Automation System Gateway Interface for LonWorks®
24 vDC Power
Ethernet Port
LXPWRSPLY Power SupplyWIH-BAS
Mount all components inside HBA p/n LXENDM DIN rail enclosure. (LXENDM is ordered separately)
BASIntegration
Metasys® is a registered trademark of Johnson Controls, Inc. LonWorks® is a registered trademark of Echelon Corp.
BACnet® is a registered trademark of ASHRAE
PAgE 170 hubbell-automation.com
WIH-AT-FA
wiHUBB® Antennas and CablesWIRELESS LIgHTINg CONTROLS
PRODUCT fEATURES
• Multiple antenna options available
• Excellent performance
• Omni-directional pattern
• Fully weatherized
• Rugged and damage-resistant
• Five-year limited warranty
WIH-AT-FA
WIH-AT-AA
WIH-AT-FA-HW
Hubbell Building Automation’s wiHUBB® Antennas are designed to be used with
the wiHUBB In-Fixture Module and wiHUBB Smart Pack. The wiHUBB Articulating
Antenna and the wiHUBB Fixed Antenna-HW are ½-wave center-fed DIPole
antennas. The Articulating Antenna’s base allows the antenna to tilt 90 degrees
and rotate 360 degrees.
The Articulating Antenna and Fixed Antenna-HW’s internal counterpoise
eliminates external ground plane dependence and maximizes performance. The
wiHUBB Fixed Antenna is a ¼-wave center-fed monopole antenna that utilizes a
helical element to greatly reduce the physical length of the antenna housing.
WIRELESS COMES TO LIgHT®
®
PAgE 171(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
WIH-at
ModElWIH-at
antenna cables
tYPEcab24IN
cab36IN
cab48IN
Antenna Cable, 24” cable (Includes mounting hardware)
Antenna Cable, 36” cable (Includes mounting hardware)
Antenna Cable, 48” cable (Includes mounting hardware)
ModElWIH-at
antennas
general Specifications
Antenna Type Dipole – No ground plane required: WIH-AT-AA, WIH-AT-FA-HW Monopole – Requires an external proximity ground plane for proper operation: WIH-AT-FA. NOTE: 4”x4” ground plane centered around the antenna base recommended.
Center Frequency 916MHz
Wavelength ½-wave: WIH-AT-AA, WIH-AT-FA-HW ¼-wave: WIH-AT-FA
Voltage Standard Wave Ration (VSWR) <2.0 typical at center: WIH-AT-AA <1.9 typical at center: WIH-AT-FA-HW, WIH-AT-FA
Impedance 50 ohms
Connector RP-SMA
Dimensions WIH-AT-AA: 5.59”H x 0.32”W with 90° tilt and 360° rotation WIH-AT-FA: 2.00”H x 0.31”W WIH-AT-FA-HW: 4.72”H x 0.32”W
Color Black
Warranty Five-year limited
aa
fa
fa-36
fa-48
fa-HW
Articulating Antenna, Dipole – No Ground Plane Required, 5.59” H with 90° BendFixed Antenna, Monopole – Requires Ground Plane, 2.00” H, with 24” cable & mounting hardwareFixed Antenna, Monopole – Requires Ground Plane, 2.00” H, with 36” cable & mounting hardwareFixed Antenna, Monopole – Requires Ground Plane, 2.00” H, with 48” cable & mounting hardwareFixed Antenna, Dipole – No Ground Plane Required, 4.72” H
ordering Information
WIH-at
PAgE 172 hubbell-automation.com
general Specifications
Electrical 4 Terminal Connections
- Red: +24V
- Blue: Occupancy Sensor Input
- Yellow: Photocell/Daylight Sensor Input
- Black: Common
Class 2 device
Max Cable Length Supported: 300-ft from device to control module
Plenum Rated Complies with requirements for use in a plenum area
Construction Material: SABIC NORYL HS2000X
Dimensions 2.168”L x 1.093”W x 0.995”H
Weight 0.8 oz
Color Gray
Mounting Adapter may be mounted using a zip-tie (not included) or with a #8 or #10 mounting screw (not included)
Warranty Five-year limited
RJ45 Adapter and CAT5 System CablesWIRELESS LIgHTINg CONTROLS
Hubbell Building Automation’s RJ45 Adapter and CAT5 system cables are designed to be
used with HBA low voltage occupancy and daylight sensors. The adapter replaces the Quick-
To-Install™ (QTI) connectors previously used by the wiHUBB® and Zone5™ occupancy and
daylight sensors and enables devices to connect to HBA control modules (e.g. wiHUBB
Smart Pack, Zone5 Control Module, etc) using standard CAT5 cable.
PRODUCT fEATURES
• Supports wiHUBB and Zone5 occupancy and daylight sensors
• Plenum rated
• Five-year limited warranty
RJ45Adapter
24VDC
LOW
VOLTAGEWIRELESS COMES TO LIgHT®
®
PAgE 173(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
cat5 System cables
SPEcIal NotES:1. When cutting CAT5 cable to specific lengths, the cable pin out is as follows:
WHITE with ORANGE STRIPEORANGEWHITE with GREEN STRIPEBLUEWHITE with BLUE STRIPEGREENWHITE with BROWN STRIPEBROWN
rJ45adaPtEr
rJ45adaPtEr-10
rJ45adaPtEr-50
RJ45 Adapter
RJ45 Adapter - 10 Pack
RJ45 Adapter - 50 Pack
cat5-3IN-bl
cat5-10f-bl
cat5-50f-bl
cat5-100f-bl
cat5-10f-WH
cat5-50f-WH
cat5-100f-WH
cat5-10f-gN
cat5-50f-gN
cat5-100f-gN
cat5-3IN-Yl
cat5-50f-Yl
cat5-100f-Yl
CAT5 Jumper Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 3in, Blue
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 10ft, Blue
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 50ft, Blue
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 100ft, Blue
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 10ft, White
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 50ft, White
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 100ft, White
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 10ft, Green
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 50ft, Green
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 100ft, Green
CAT5 Jumper Cable for Zone5 Master/Row Control Switches, Plenum Rated, 3in, Yellow
CAT5 Cable for Zone5 Master/Row Control Switches, 50ft, Yellow
CAT5 Cable for Zone5 Master/Row Control Switches, 100ft, Yellow
12345678
ModEl/dEScrIPtIoN
ModEl
PIN No. WIrE color
ordering Information
rJ45 adapter
PAgE 174 hubbell-automation.com
WIH-DS
Hubbell Building Automation’s wiHUBB® Daylight Sensors provide the necessary
daylight-level information to the wiHUBB network. Using a photodiode element,
the daylight sensor continuously measures daylight levels and sends the
information to the network devices which then perform daylight switching or
dimming functionality based on the amount of natural light in the area.
general Specifications
Electrical Four jumper-selectable foot candle ranges: 0.3-30fc; 3-300fc; 30-3,000fc; 60-6,000fc
Powered by wiHUBB Smart Pack SmartPORT using plenum rated CAT5 cables (ordered separately)
Operating Environment WIH-DS: Indoor use only. Operating Temperature: 0°C to +40°C
WIH-DS-O: Outdoor Use - IP54. Operating Temperature: -40°C to +50°C
Construction Protective hard plastic cover and housing
Dimensions 2”D x 1.2”H
Certifications UL and cUL listed
Warranty Five-year limited
PRODUCT fEATURES
• Indoor and Outdoor models available
• Architecturally attractive design
• Open loop operation
• Foot-candle range: 3-6,000fc
• Mounts vertically or horizontally
• Color coded, plug-and-play integration with wiHUBB Smart Pack
• UL and cUL listed
• Five-year limited warranty
ordering Information
ModEl / dEScrIPtIoNWIH-dS
WIH-dS-owiHUBB Daylight SensorwiHUBB Daylight Sensor for Outdoors
DAYLIGHTHARVESTING
WIRELESS LIgHTINg CONTROLS
wiHUBB® Daylight Sensors
WIRELESS COMES TO LIgHT®
®TESTED & APPROVED
WATER-DUST RESISTANT
IP54
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
wiSTAR™ is a wireless, self-powered lighting control system designed for stand-alone,
indoor applications such as offices, conference rooms, break rooms, classrooms and much more. From retrofitting
older structures to designing new buildings, wiSTAR is a simple way to ensure flexibility, energy savings, and cost
reductions to almost any space.
Seamless Area Lighting
NO BATTERIES
Utilizing the EnOcean Technology Platform, wiSTAR devices harvest energy from their surroundings – tiny changes
in movement or light are all that is needed. The wall switches use the linear motion of the button push to create the
power needed to send a signal to operate the lights. Sensors have tiny solar cells that convert light into the power
they need to do the same thing. These solar cells work off of any light source and the converted energy is stored for
operation during times with no light.
NO WIRES
wiSTAR devices are self-powered and require no wires to operate. These devices can be freely positioned making
for versatile layouts. Compared to a wired solution, buildings can be planned, constructed and operated with greater
flexibility and at a lower cost.
NO WORRIES
With wireless technology, wiSTAR installs easily into existing buildings without the need to completely rewire the
space. This makes wiSTAR ideal for adding lighting controls to areas that have traditionally been difficult to retrofit,
including historical buildings.
TM
(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 175
PAgE 176 hubbell-automation.com
WIS-ISM
TM
PRODUCT fEATURES
• Switches lighting or other electrical loads On/Off
• Installs inside or mounts to electrical box using threaded connector
• Easily links with wireless sensors and switches
• Five-year limited warranty
A simple solution for wireless control of lighting and appliances. Hubbell Building
Automation’s wiSTAR™ In-line Switch Module uses radio frequency technology
to communicate with other wiSTAR products and provides an amazingly simple
solution for control of lighting and other electrical loads.
The module’s compact size enables flexible installation inside of or next to
electrical boxes and fixtures so it can be easily wired out of sight using standard
wiring practices. Simply link the module to a wiSTAR occupancy sensor, switch or
light sensor and experience levels of efficiency and convenience that can only be
achieved through wireless controls.
2.78”
1.65”
Compact Casing
1.1”
WIRELESS
Device Configuration and Manual Control Buttons with LEDs
WIRELESS LIgHTINg CONTROLS
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
wiSTARTM In-line Switch Module
PAgE 177(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
general Specifications
Power Supply 120/277VAC, 50/60Hz
Maximum Load General Purpose – 16A @ 120/277VAC Resistive – 16A @ 120/277VAC Tungsten – 960W @ 120VAC Ballast - 600W @ 120VAC
Motor Load Rating - ½ HP @ 120VAC
Power Consumption 1.1W @ full load, 500mW quiescent
Inputs/Outputs Flying-lead style power input wires 1 normally open relay 1 switched output wire Radio Frequency (RF) transceiver 2 Buttons with LEDs for device configuration and manual control
RF Communications EnOcean 902 MHz
Transmission Range 80ft. (25m)
Dimensions 2.78”H x 1.65”W x 1.1”D
Weight 3.2 oz.
Mounting Install inside standard electrical box Connect to electrical box and fixutes using 1/2” threaded nipple
Environment Indoor use only 32° to 131° F (0° to 55° C) 20% to 95% relative humidity (non-condensing)
Agency Compliance Conforms to UL Std. 244A and 1472 Certified to CAN/CSA Std. C22.2 NO 184 FCC: SZV-STM300U IC: 5713A-STM300U
Warranty Five-year limited
Interoperable Products / EEPs Product Name (EEP #)(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0° to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)
ordering Information
MODEL
WIS-ISM-WH wiSTAR In-line Switch Module, 902MHz, White
WIS-ISM-WH
PAgE 178 hubbell-automation.com
WIS-PSM
PRODUCT fEATURES
• Provides switching of plug-in electrical loads
• Communicates with other devices to enable energy savings
• Plugs into any standard outlet, no wiring required
• Easily links with wireless sensors and switches
• Five-year limited warranty
A simple solution for wireless control through any standard outlet. Controlling
lamps and electronics in any room is simple when you use Hubbell Building
Automation’s wiSTAR™ Plug-In Switch Module.
The module uses radio frequency technology to communicate wirelessly with
other wiSTAR devices and provides convenient control of lighting and electronic
appliances. Simply plug the module into any standard outlet and then plug the
lamp or other electronic device into the receptacle on the opposite end. Link the
module to a wiSTAR switch or occupancy sensor for convenient wireless control.
4.09”
1.85”
1.26”
WIRELESS
Device Configuration and Manual Control Buttons with LEDs
TM
WIRELESS LIgHTINg CONTROLS
wiSTARTM Plug-in Switch Module
120VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 179(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
general Specifications
Power Supply 120VAC, 50/60Hz
Power Consumption 1.1W @ full load, 500mW quiescent
Inputs/Outputs Standard male plug for power input Standard female plug for controlled output 1 normally open relay Input for accessory tabletop rocker pad Radio Frequency (RF) transceiver 2 Buttons with LEDs for device configuration and manual control
Maximum Load General Purpose – 15A @ 120VAC Resistive – 15A @ 120VAC Tungsten – 960W @ 120VAC Ballast - 600W @ 120VAC Motor Load Rating - ½ HP @ 120VAC
RF Communications EnOcean 902 MHz
Transmission Range 80ft. (25m)
Dimensions 4.09”H x 1.85”W x 1.26”D
Weight 12.3oz. (348g)
Cord Lengths Plug cord: 3ft. (91.4cm)
Outlet cord: 1 ft. (30.5cm)
Mounting Free standing, or mounts to wall using included mounting plate
Environment Indoor use only 32° to 131° F (0° to 55° C) 5% to 95% relative humidity (non-condensing)
Agency Compliance Conforms to UL Std. 244A and 1472 Certified to CAN/CSA Std. C22.2 No. 184 FCC: SZV-STM300U IC: 5713A-STM300U
Warranty Five-year limited
Interoperable Products / EEPs Product Name (EEP #)(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0° to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)
ordering Information
MODEL
WIS-PSM-WH wiSTAR Plug-In Switch Module, 902MHz, White
WIS-PSM-WH
PAgE 18 0 hubbell-automation.com
WIS-DSM
Hubbell Building Automation’s wiSTAR™ Wireless Light Sensor has built-in solar
cells that draw on available ambient light to power itself and can operate for up
to 7 days in total darkness. Batteries are not required for continuous operation.
The Light Sensor is designed to operate in closed loop applications for light levels
from 0 to 94.8 footcandles (0 to 1020 LUX).
This is a revolutionary product for daylight harvesting applications to meet energy
saving initiatives. Optimally place the sensor in the desired lighted space, pair
it with a receiver for load control and your installation is complete. The self-
powered wireless light sensor design also overcomes the placement and coverage
challenges of traditional light sensors. They may be mounted wherever needed
without moving or installing new wiring or conduit.
PRODUCT fEATURES
• Daylight Harvesting with both switched and dimmed capabilities
• Self-Powered & Self-Charging
• No Batteries or External Power Required
• Quick Charge Time to Operation
• Up to 7 days of Stored Power
• Five-year limited warranty
WIRELESSDAYLIGHT
HARVESTINGNO BATTERIES OR POWER REQUIRED
Solar Cells
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
TM
WIRELESS LIgHTINg CONTROLS
wiSTARTM Light Sensor
PAgE 181(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
general Specifications
Frequency 902 MHz
Photocell 0 to 94.8FC (0 to 1020 LUX)
Transmission Interval Upon > 20FC (200LUX) changes
Minimum Light Required 4FC (40 LUX)
Solar Cell Operating Range 4 to 100FC (40 to 1000 LUX)
Minimum Charge Time to Begin Operation 1 minute @ 20FC (200 LUX)
Full Charge Time ~8 hours @ 100FC (1000 LUX)
Maintain Charge Time 3 hours per 24 hours @ 20FC (200 LUX)
Operation Life at Full Charge 7 Days
Optional Battery Life 10 Years
Operating Temperature Range 32°F to 104°F (0°C to 40°C)
Storage Temperature Range -4°F to 158°F (-20°C to 70°C)
Relative Humidity 0% to 95%, non-condensing
Usage Indoor use only
Mounting Height 8-12 feet
Warranty Five-year limited
ordering Information
MODEL
WIS-dSM-WH wiSTAR Daylight Sensor Module, 902MHz, White
WIS-dSM-WH
PAgE 182 hubbell-automation.com
WIS-OSC
Saving energy without sacrificing comfort can be effortless with occupancy based
controls. Hubbell Building Automation’s wiSTAR™ Ceiling Mounted Occupancy
Sensor enables a new level of energy saving control for rooms, hallways and
other common areas. The occupancy sensor uses radio frequency technology to
communicate wirelessly with other wiSTAR devices to turn off lights and electrical
loads when a space has been unoccupied for a set period of time.
Because the sensor is wireless there is no need to run additional wiring and
installation can be completed in a matter of minutes. The sensor is self-powered
by harvesting light energy, eliminating the need for periodic battery changes. The
clean, contemporary styling makes the sensor an attractive addition to any décor.
WIRELESSOCCUPANCY
SENSINGNO BATTERIES OR POWER REQUIRED
PRODUCT fEATURES
• Sends messages to other devices when motion is detected
• Harvests light energy to power the sensor
• Mounts easily on any ceiling or material
• Works with other sensors for enhanced occupancy tracking
• Built-in tests to confirm operation
• Alternate power supply options for extreme low light conditions
• Five-year limited warranty
6.5”
1.47”
PIRMotion Sensor
Integrated Solar Cells
2.36”
TM
WIRELESS LIgHTINg CONTROLS
wiSTARTM Ceiling Mounted Occupancy Sensor
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 183(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
0-1’ 3.1’ 4.6’ 7.5’ 9.3’ 16.8’14.2’13.’10.9’
10’
0
ordering Information
MODEL
WIS-oSc-WH wiSTAR Occupancy Sensor - Ceiling Mount, 902MHz, White
WIS-oSc-WH
general Specifications
Power Supply Indoor light energy harvesting (Optional supplemental battery or 2-wire connector for external power or remote solar cell)
RF Communications EnOcean 902 MHz
Transmission Range 80ft. (25m)
Motion Detection Range 40ft. (25m) diameter
Minimum Operating Light 50 lux (for auto-off only)
Startup Charge Times (from empty) Linking = 4 min @ 100 lux 1.5 min @200 lux Motion Transmission = 6 min @ 100 lux 3.5 min @ 200 lux Note: Bright light or battery can be temporarily used to shorten initial startup charge times
Charge Time to Full 9 hrs @ 200 lux
Sustaining Charge Time 3 hours per 24 hours @ 200 lux
Motion Transmission Interval 60 - 300 seconds (based on real-time charge rate) 60 sec @ 200 lux - 300 sec @ 50 lux
Heartbeat Transmission Interval 120 - 600 seconds (based on real-time charge rate) 120 sec @ 200 lux - 600 sec @ 50 lux
Operating Life in Darkness 48 hours (after full charge)
EnOcean Equipment Profile (EEP) A05-07-02
Dimensions 6.5”H x 2.36”W x 1.47” D
Mounting Height 7 - 10 feet (recommended)
Agency Compliance FCC: SZV-EOSC05 IC: 5713-EOSC05
Warranty Five-year limited
Interoperable Products / EEPs Product Name (EEP #)
(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 - 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)
Top view of sensor coverage based on 10ft mounting height Side view of sensor coverage based on 10ft mounting height
PAgE 184 hubbell-automation.com
WIRELESS LIgHTINg CONTROLS
wiSTARTM Wall Mounted Occupancy Sensor
WIS-OSW
Saving energy without sacrificing comfort can be effortless with occupancy based
controls. Hubbell Building Automation’s wiSTAR™ Wall-Mounted Occupancy
Sensors are wireless and self-powered making them one of the most cost-effective
ways to control energy-use in unoccupied rooms. They can be installed in minutes
because there are no additional wires to run and they require no batteries so on-
going maintenance costs are eliminated.
The sensor harvests solar energy from indoor light and uses radio frequency
technology to communicate wirelessly with other wiSTAR devices, turning off lights
and electrical loads when it detects that a space has been unoccupied for a set
period of time. The wall-mounted occupancy sensors feature clean contemporary
styling, making them an attractive addition that’s sure to compliment any décor.
PRODUCT fEATURES
• Sends messages to other devices when motion is detected
• Harvests light energy to power the sensor
• Mounts flush on wall or in a corner
• Works with other sensors for enhanced occupancy tracking
• Interchangeable lenses for tailored sensor coverage
• Built-in tests to confirm operation
• Alternate power supply options for extreme low light conditions
• Five-year limited warranty
WIRELESSOCCUPANCY
SENSINGNO BATTERIES OR POWER REQUIRED
PIRMotion Sensor
Integrated Solar Cells
5.83”
2.52”1.8”
TMTITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 185(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
Long Range Coverage Top View
16ft
8ft
0
77°
21.5° 14°6 .5°
29°
16ft
8ft
center line
6.8ft(2.1m)
3ft(1m)
7ft(2.2m)
10ft(3m)
60ft(18.3m)
100ft(30.5m)
35ft(10.7m)
Side View
Wide Angle Coverage Top View
16ft (5m)
33ft (10m)
33ft (10m)
16ft (5m)
0
50ft(15.2m)
6ft(1.2m)
Side View
15ft(4.6m)
25ft(7.6m)
6.8ft(2.1m)
general Specifications
Power Supply Indoor light energy harvesting (Optional supplemental battery or 2-wire connector for external power or remote solar cell)
RF Communications EnOcean 902 MHz
Transmission Range 80ft. (25m)
Motion Detection Range 50ft. wide angle lens / 100ft. long range lens
Minimum Operating Light 50 lux (for auto-off only)
Startup Charge Times (from empty) Linking = 4 min @ 100 lux
1.5 min @200 lux Motion Transmission = 6 min @ 100 lux 3.5 min @ 200 lux Light/Walk Test Modes + 5.5 hrs @ 200 lux
Note: Bright light or battery can be temporarily used to shorten initial startup charge times
Charge Time to Full 9 hrs @ 200 lux
Sustaining Charge Time 3 hours per 24 hours @ 200 lux
Motion Transmission Interval 60 - 300 seconds (based on real-time charge rate) 60 sec @ 200 lux - 300 sec @ 50 lux
Heartbeat Transmission Interval 120 - 600 seconds (based on real-time charge rate) 120 sec @ 200 lux - 600 sec @ 50 lux
Operating Life in Darkness 48 hours (after full charge)
EnOcean Equipment Profile (EEP) A05-07-02
Dimensions 5.83”H x 2.52”W x 1.8”D
Mounting Height 6 - 8 feet (recommended)
Agency Compliance FCC: SZV-EOSC05 IC: 5713-EOSC05
Warranty Five-year limited
Inter-operable Products / EEPs Product Name (EEP #)
(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01)
Central Gateway (A5-38-08)
ordering Information
MODEL
WIS-oSW-WH wiSTAR Occupancy Sensor - Wall Mount, 902MHz, White
WIS-oSW-WH
PAgE 186 hubbell-automation.com
WIS-KCS
Take the first step toward significant energy savings. Hubbell Building Automation’s
wiSTAR™ Key Card Switch is one of the simplest, most economical ways to save
energy through occupancy based control of lighting, HVAC and miscellaneous
electric loads.
The switch is self-powered and the simple act of inserting or removing the card
generates enough kinetic energy to send a wireless signal to other wiSTAR devices
within the room. To operate the switch, guests simply insert their key card in the
slot when they enter the room and then remove it when they leave. The key card
switch is wireless and can be installed in minutes without having to drill into the
wall or run additional wiring. The switch features a clean contemporary styling,
making it an attractive addition that’s sure to compliment any décor.
PRODUCT fEATURES
• Determines occupancy based on guest room key being inserted or removed
• Harvests kinetic energy from the card action - no batteries
• Installs easily in new or existing rooms - no wiring
• Transmits room occupancy status wirelessly
• Five-year limited warranty
WIRELESSNO BATTERIES OR POWER REQUIRED
4.72”
3.8”0.43”
Key Card Slot
TM
WIRELESS LIgHTINg CONTROLS
wiSTARTM Key Card Switch
PAgE 187(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
general Specifications
Power Supply Mechanical energy harvesting (power is generated by the motion of key card moving in or out)
Inputs/Outputs Slot for standard hotel key card (2.125” W x 3.375” H x 0.034” D) Radio Frequency (RF) transmitter
RF Communications EnOcean 902 MHz
Transmission Range 80ft. (25m)
RF Transmission On key card insertion or removal
EEP (EnOcean Equipment Profile) F6-04-01
Installation Surface mounted on wall (using included mounting screws)
Dimensions 4.72”H x 3.8”W x .43”D
Weight 3.5 oz. (99 g)
Environment Indoor use only 32° to 131° F (0° to 55° C) 5% to 95% relative humidity (non-condensing)
Agency Compliance FCC: SZV-PTM33XU IC: 5713A-PTM33XU
Warranty Five-year limited
Interoperable Products / EEPs Product Name (EEP #)
(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 to 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01)
Central Gateway (A5-38-08)
ordering Information
MODEL
WIS-kcS-WH wiSTAR Key Card Switch, 902MHz, White
WIS-kcS-WH
PAgE 18 8 hubbell-automation.com
WIRELESS LIgHTINg CONTROLS
wiSTARTM Wall Switches
WIS-SRPWIS-DRP
PRODUCT fEATURES
• User interface for controlling lighting loads
• Harvests energy from linear motion - no batteries
• Transmits unique RF message each time pressed or released
• Five-year limited warranty
4.9”
Mechanical EnergyHarvesting
1 or 2 Button Rocker Switches
EnOcean 902MHz Frequency
Self-powered wireless controls are simple to install. Hubbell Building Automation’s
wiSTAR™ Single and Double Rocker Switches use EnOcean energy harvesting
technology to communicate wirelessly with other wireless devices and provide
convenient control of lighting, temperature and miscellaneous electric loads.
The rocker switches are self-powered and never require batteries. The action of
pressing the rocker generates enough energy to send a wireless signal to other
wiSTAR devices. Use them in conjunction with sensors and controls to maximize
efficiency and provide a level of comfort and convenience you cannot achieve with
traditional switches. The rocker switches feature a clean contemporary styling,
making them an attractive addition that’s sure to compliment any décor.
WIRELESS
4.52”
3.21”
0.72”0.74”
WIS-SRPWIS-DRP
NO BATTERIES OR POWER REQUIRED
TM
PAgE 189(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
general Specifications
Power Supply Mechanical Energy Harvesting (power is generated by the motion of pressing the switch)
Inputs/Outputs 1 or 2 button rocker switch options Radio Frequency (RF) transmitter
RF Communications EnOcean 902 MHz
Transmission Range 80ft. (25m)
RF Transmission On press and release of rocker button
EEP (EnOcean Equipment Profile) F6-02-02
Dimensions Single: 4.95”H x 3.21”W x 0.74”D Double: 4.95”H x 4.52”W x 0.72”D
Weight Single: 3.98oz. Double: 5.3oz.
Mounting Surface mounted on wall (using included mounting screws) Can also be flush mounted by optional use of electrical wall box or low-voltage ring
Environment Indoor use only 32° to 131° F (0° to 55° C) 5% to 95% relative humidity (non-condensing)
Agency Compliance FCC: SZV-PTM210U IC: 5713A-PTM210U
Warranty Five-year limited
Inter-operable Products / EEPs Product Name (EEP #)
(EnOcean Equipment Profiles) Rocker Pad Switch (F6-02-02) Key Card Switch (F6-04-01) Window handle (F6-10-00) 1BS Single Input Contact (D5-00-01) Temperature Sensor, 0 - 40° C (A5-02-05) Occupancy Sensor (A5-07-01) Contact, single input (A5-30-01) Central Gateway (A5-38-08)
ordering Information
MODEL
WIS-SrP-WH wiSTAR Single Rocker Pad, 902MHz, White
WIS-drP-WH wiSTAR Double Rocker Pad, 902MHz, White
wiSCAPE GATEWAYS
wiSCAPE Gateways are used to combine up to 1000 wiSCAPE
Fixture Modules into a single wireless network. Although each
Fixture Module is functionally autonomous, the Gateway also
acts as an access point through which the modules can be
managed, monitored, and metered through wiSCAPE View™
software.
wiSCAPETM uses a combination of fixture modules and gateways to create a wireless
street lighting controls solution. wiSCAPE components are adaptable to ALL fixture
types and ALL voltages in new and retrofit street lighting environments. These
components create a secure peer-to-peer, self-organizing and self-healing mesh network infrastructure that allows for distances
of 300ft or 1,000ft between devices*. wiSCAPE allows users to manage, monitor, and meter individual fixtures or groups of
fixtures over-the-air with the click of a mouse.
*Dependant on choice of module.
THREE SERVER OPTIONSThere are three ways to host wiSCAPE on a server:
1. Local PC tied directly to the Gateway(s).
2. Local PC connected to remote Gateway(s) via
the Internet.
3. Cloud based server connected to remote
Gateway(s) via the Internet.
Smart Street Lighting
wiSCAPE FIXTURE MODULES • Dry contact inputs for low voltage devices.
• Dry contact output for driving external contactors.
• 0-10V output control for Pre-set levels,
Ramp speed (Up-Down), Smooth transition, Minimum
and Maximum Dimming levels, Minimum On-time before
dimming, and Demand/ Response load shedding settings.
• Unlimited number of schedules based on Sunrise/Sunset,
Time of Day, Day of Week, Predefined periods and Holidays.
• Real latitude and longitude location information.
• Unique serial number bar code.
• Works with all lighting fixtures types including:
• LED,
• Induction,
• MH-HPS-LPS
• Incandescent
• Halogen, and Plasma.
PAgE 19 0
wiSCAPE REDUCES THE OvERALL AMOUNT Of ENERgY USED BY STREET LIgHTSOne of the best ways to save energy from street lighting is to dim or switch fixtures off when they are not needed. wiSCAPE offers a variety of features to facilitate this:
Photocells, Light Sensors, Standard Time Clock, Astronomical Time Clock Lights can be dimmed* or switched based on daylight levels, time schedules and/or sunrise and sunset. For example, streetlights could be turned on 15 minutes before sunset, dimmed to 50% at 11 p.m., set to full at 5 a.m., and turn off 15 minutes after sunrise.
wiSCAPE performs every function municipal engineers and control electricians are looking for:
*Dimming solutions are only available when used with a 0-10V dimmable fixture.
WISCAPE IS AffORDABLE TO INSTALLThe cost of the fix is always a concern as municipalities and utilities have limited budgets to work with.
Wireless and ModularWhether cities choose to retrofit existing fixtures or go with something new, wiSCAPE modules are compatible with all types of lighting fixtures and aren’t limited to any specific fixture manufacturer. The wireless technology allows for a cost effective installation, eliminating the need for trenching and wiring – practices that can make controls an expensive solution. Due to the modular nature of wiSCAPE, additional fixtures and streets can be added to the system at any time or as funds become available.
WISCAPE LIgHTS STREETS BASED ON ACTIvITY LEvEL Some street locations have such random use at night that trying to set light levels based on a schedule is nearly impossible.
Motion Sensors Motion sensors would allow each individual streetlight to dim* or switch on or off based upon whether motion is detected from either a vehicle or a pedestrian.
WISCAPE ENABLES MUNICIPALITIES TO PAY fOR ACTUAL ENERgY CONSUMED Because streetlights are not always metered, cities are often charged a tariff per streetlight currently installed. While this method is rarely accurate due to fixtures requiring maintenance at any given time, it’s difficult to prove exactly how much energy was really consumed.
Monitoring and Metering wiSCAPE allows the city to monitor and meter each fixture’s energy use and create an energy usage report for an individual fixture, a zone or the entire city.
WISCAPE ALLOWS fOR STREAMLINED AND ECONOMICAL STREET LIgHTINg NETWORKS Keeping city fixtures in working order is costly. Oftentimes, maintenance departments are unaware of an outage until they get a call or incur the cost of sending maintenance crews out each night to visually identify lamp failures.
Alarms and NotificationswiSCAPE can be set to trigger alarm notifications for streetlight problems such as burned lamps, over/under voltage, and cycling. Not only does wiSCAPE report the exact problem fixture and fixture location (GPS), the system also gives the information needed for maintenance crews to prioritize repairs and schedule the most efficient repair routes.
WISCAPE ASSISTS IN MINIMIZINg LIgHT POLLUTIONLight pollution is an issue that’s gaining greater attention across the country as more and more cities are passing Dark Sky legislation.
Dimming, Scheduling, and Motion Control wiSCAPE allows for control down to the granularity of a single fixture and can utilize a combined strategy of dimming*, scheduling, and motion control to dim or turn lights off when they are not needed.
wiSCAPETM is a Wireless Street Lighting Controls Solution that enables utilities and
municipalities to manage, monitor and meter each individual streetlight throughout the city.
(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 191
PAgE 192 hubbell-automation.com
PRODUCT fEATURES
• Scales to any network size
• Solid-state disks withstand temperature, shock and vibrations
• Surge protected
• Module/Gateway ratio:1000 modules per Gateway
• Fail-safe operation- defaults to photocell control
• Gateways are in NEMA 4X (IP66) cabinets
• Data storage supports up to six months of rolling data storage
• 128-bit AES encryption14”
6”
wiSCAPE™ gateway WIRELESS STREET LIgHTINg CONTROLS
12”
WIRELESS
WIR-GATEWAY
Hubbell Building Automation's wiSCAPE™ Gateway is used to combine up to 1000 wiSCAPE
Fixture Modules into a single wireless network. Although each Fixture Module is functionally
autonomous, the Gateway acts as an access point through which the modules can be
managed, monitored and metered through wiSCAPE View™ software.
Using the robust 2.4GHz ISM (Industrial, Scientific and Medical) radio band, the wiSCAPE
Gateway's wireless control technology adapts easily to complex automation situations for
quick, simple and economical commissioning and operation.
120VAC
RATED
WATER-DUST RESISTANT
IP66
PAgE 193(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELWIr-gatEWaY
MODEMblank None
cM Cellular Modem
general Specifications
Voltage 120-240VAC; 50/60Hz
Power consumption 18 watts
Fused supply 5 amps
Surge protection 190 Joules (10,000 surge current rating measured using industry standard 8/20 µSec wave)
50/60 HZ, Consumption: max 26 VA
Ambient temperature range -400F to 1850F (-400C to 850C)
Relative Humidity Up to 99% non-condensing (fully waterproof enclosure NEMA 4x)
Dimensions 12”L x 14”W x 6”H
Construction Compression molded fiberglass reinforced polyester construction with flush, solid/opaque cover IP66 Rated
Certifications FCC/IC Certified, RoHS Compliant
Warranty Five-year limited warranty
ordering Information
WIr-gatEWaY
STEPDOWN TRANSfORMERWIr-StPdNXfMr-277 wiSCAPE Gateway 277V to 120V Stepdown
WIr-StPdNXfMr-347 wiSCAPE Gateway 347V to 120V Stepdown
accessory
PAgE 194 hubbell-automation.com
Hubbell Building Automation's wiSCAPE™ Fixture Module is a bidirectional wireless RF
device that allows an individual fixture to be managed, monitored and metered. The wiSCAPE
Module can switch loads of up to 3 Amps and is available for the following voltages: 120,
208, 277 and 347VAC. Built-in 0-10V outputs also allow fixtures to be dimmed. The Fixture
Module works with all fixture types including: LED, Induction, MH-HPS-LPS, Incandescent,
Halogen and Plasma. Digital and analog inputs and outputs make sending and receiving
signals from additional control devices simple and easy.
wiSCAPE Fixture Modules communicates wirelessly over a robust 2.4GHz ISM (Industrial,
Scientific and Medical) certified radio signal.
The wiSCAPE Fixture Module drastically simplifies control and automation of projects,
especially in retrofit environments and challenges the legacy world of wired-systems.
wiSCAPE wireless control technology adapts easily to complex automation situations for
quick, simple and economical commissioning.
PRODUCT fEATURES
• Inputs for low-voltage switch, motion and photo sensor
• Outputs 0-10V for dimming ballasts (Sink+Source)
• Dry contact output for driving external contactors
• Bidirectional wireless RF Mesh communications
• Individual addresses providing unique serial numbers
• Can work as a fully autonomous system, or remotely managed from a central
system. No central panel required
• Multi-level grouping and multiple scenarios
• Adjustable minimum and maximum dimming levels
• Programmable state after blackout, with peak shaving options
• Blink warning and override before scheduled lights off
• Both locally and remotely controllable with status and metering reporting
• Smart daylight harvesting and motion sensing functions, with occupied and
unoccupied levels including a lamp saver function
• Demand response (load shedding) and emergency mode ready
.86”
2.65”
wiSCAPE™ fixture ModuleWIRELESS STREET LIgHTINg CONTROLS
WIRELESS
4.75”
WIR-RM
0-10VDIMMING
120, 208 277, 347
VAC
1.52”
PAgE 195(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELWIr-rMS wiSCAPE Wireless
Relay - Standard Range
WIr-rMl wiSCAPE Wireless Relay - Long Range
vOLTAgE24 24VAC*
120 120VAC208 208/240VAC277 277VAC347 347VAC
general Specifications
Voltage 120, 208-240, 277, 347; 50/60Hz Less than 2 watts standby consumption
Maximum Load Amperage 3 amps
Phase-cut Dimming Continuous retroactive trailing-edge
Output Status Monitoring Standard feature
Power Metering Amperage - Voltage - Power (2% accuracy), Power Factor, Cumulative Energy - Burn-time counters
Options Hi-Lo: Control for HID (Core & Coil) Dual-capacitors
0-10V Dimming For all types of 0-10V drivers & ballasts requiring either to be sunk (up to 200mA) or sourced (20mA standalone or higher w/ext. source)
Standard Inputs 3 Digital: ex: Motion sensor and switch top/bottom buttons (max : 48V) + 1 Analog 0-10V
Additional Outputs 2 Digital (Open-collector up to 48V—max: 20 mA total)
Standard Radio Up to 300 ft between modules
Long Range Radio Up to 1000 ft between modules
Ambient Temperature Range -400F to 1850F (-400C to +850C)
Relative Humidity 0% to 100% non-condensing (fully waterproof packaging option)
Certifications ETL 3192455, UL508 & CSA C22.2 No.14 U.S. FCC Part 15.247 : OUR-XBEE / OUR-XBEE UL94V-0 Flame retardant ABS or Epoxy molding
Warranty Five-year limited
ordering Information
INPUT/OUTPUTblank None
Io Input/Output
ENCLOSUREblank NoneN4 NEMA 4
* Requires Power Pack/ Includes IO Option
PAgE 196 hubbell-automation.com
Hubbell Building Automation's wiSCAPE™ Fixture Module is a bidirectional wireless
RF device that allows an individual fixture to be managed, monitored and metered. The
wiSCAPE Module can switch loads of up to 6 Amps and is available for 480VAC. Built-in
0-10V outputs also allow fixtures to be dimmed. The Fixture Module works with all fixture
types including: LED, Induction, MH-HPS-LPS, Incandescent, Halogen and Plasma. Digital
and analog inputs and outputs make sending and receiving signals from additional control
devices simple and easy.
wiSCAPE Fixture Modules communicate wirelessly over a robust 2.4GHz ISM (Industrial,
Scientific and Medical) certified meshed radio signal.
The wiSCAPE Fixture Module drastically simplifies control and automation of projects,
especially in retrofit environments and challenges the legacy world of wired-systems.
wiSCAPE wireless control technology adapts easily to complex automation situations for
quick, simple and economical commissioning.
PRODUCT fEATURES
• Inputs for low-voltage switches, motion and photo sensors
• Outputs 0-10V for dimming ballasts (Sink+Source)
• Dry contact output for driving external contactors
• Bidirectional wireless RF Mesh communications
• Individual addresses of unique serial numbers
• Can work as a fully autonomous system, or remotely managed from a central
system. No central panel required
• Multi-level grouping and multiple scenarios
• Adjustable minimum and maximum dimming levels
• Programmable state after blackout, with peak shaving options
• Blink warning and override before scheduled lights off
• Both locally and remotely controllable with status and metering reporting
• Smart daylight harvesting and motion sensing functions, with occupied and
unoccupied levels including a lamp saver function
• Demand response (load shedding) and emergency mode ready
3.15”
wiSCAPETM 480v fixture ModuleWIRELESS STREET LIgHTINg CONTROLS
WIRELESS
WIR-RM 480
0-10VDIMMING
480VAC
6.3”
3.35”
PAgE 197(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELWIr-rMS wiSCAPE Wireless
Relay - StandardWIr-rMl wiSCAPE Wireless
Relay - Long Range
vOLTAgE480 480VAC
general Specifications
Voltage 480V; 60Hz Less than 2 watts standby consumption
Maximum Load Amperage 6 amps
Phase-cut Dimming Continuous retroactive trailing-edge
Output Status Monitoring Standard feature
Power Metering Amperage - Voltage - Power (2% accuracy), PF, Cum. Energy - Burn-time counters
Options Hi-Lo: Control for HID (Core & Coil) Dual-capacitors
0-10V Dimming For all types of 0-10V drivers & ballasts requiring either to be sunk (up to 200mA) or sourced (20mA standalone or higher w/ext. source)
Standard Inputs 3 Digital: ex: Motion sensor and switch top/bottom buttons (max : 48V) + 1 Analog 0-10V
Additional Outputs 2 Digital (Open-collector up to 48V—max: 20 mA total)
Standard Radio Up to 300 ft between modules
Long Range Radio Up to 1000 ft between modules
Ambient Temperature Range -400F to 1850F (-400C to +850C)
Relative Humidity 0% to 100% non-condensing (fully waterproof packaging option)
Certifications ETL 3192455, UL508 & CSA C22.2 No.14 U.S. FCC Part 15.247 : OUR-XBEE / OUR-XBEE UL94V-0 Flame retardant ABS or Epoxy molding
Warranty Five-year limited
ordering Information
INPUT/OUTPUTIo Input/
Output
ENCLOSUREN4 NEMA 4
N4480 Io
PAgE 198 hubbell-automation.com
Hubbell Building Automation's wiSCAPE™ PLC is a communication interface between the
wiSCAPE Keypad and the wiSCAPE Wireless Street Lighting Controls which allows for the
activation of sophisticated lighting scenarios.
PRODUCT fEATURES
• Weatherproof NEMA 4 IP66 enclosure.
• Can be wired up to 75’ from the wiSCAPE Keypad
• Communicates wirelessly with wiSCAPE Fixture Modules.
RATED
WATER-DUST RESISTANT
IP66
8”
4”
wiSCAPE™ PLCWIRELESS STREET LIgHTINg CONTROLS
WIRELESS
120347VAC
8”
WIR-PLC
PAgE 19 9(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELWIr-Plc
vOLTAgE120 120 VAC208 208/240VAC277 277VAC347 347VAC
general Specifications
XB RF mesh Signal 2.4GHz – 802.15.4 ISM
Supply Voltage 120, 208, 240, 277 or 347 VAC
PLC Central Carrier Frequency 262kHz
Operating Temperature -4°F to 122°F (-20°C to +50°C)
Construction Rugged design enabling installation in a weatherproof NEMA 4 enclosure
Dimensions 8”L x 8”W x 4”H
Warranty Five-year limited
ordering Information
WIr-Plc
PAgE 20 0 hubbell-automation.com
Hubbell Building Automation's wiSCAPE View™ is an intuitive software platform that can configure, manage, monitor and meter a wiSCAPE Lighting
Control System, all in one easy to use software platform. Using wiSCAPE View the user is able to remotely access multiple wiSCAPE Gateways
individually from one location.
wiSCAPE view™ Graphical System Management Software
• Secured multi-concurrent users login and tractability
• Module configuration and control
• Creation/Editing of the user-defined library of Scenarios - Commands
- Groups - Schedules
• Database management
• Historical data logging of power use, data acquisition modules (pulse
counters, analog and digital sensors and instruments) and history of
commands and scenarios
wiSCAPE™ Software Suite WIRELESS STREET LIgHTINg CONTROLS
wiSCAPE™ Wireless Street Lighting Controls offers a suite of software to man-
age, monitor, and meter your wireless street lighting network.
• Software Configuration of modules
• Scheduling
• Zone Design (Virtual assignment of Relays to Zones)
• Power Monitoring
general Specifications
Data storage: MySQL databaseOperating System: Windows Server 64-bitOperating System: User Desktops, Tablets or LaptopsDesktop Browser and Settings Any browser, no special setting (Active X, registry settings, etc.) and Operating System: Reporting Tools: Exports to Excel and CSV Formats
Hubbell Building Automation's wiSCAPE Enterprise™ is an add on module to wiSCAPE View that allows the user to conveniently combine all of their
Gateways into a single database. wiSCAPE Enterprise allows single sign-on and access to all installed Gateways and provides all of the functionality
of wiSCAPE View.
wiSCAPE Enterprise™ Software
PAgE 201(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELWIr-SS wiSCAPE Software Suite
SOfTWAREVIEW
ENtErPrISEbacNEt
aPP
ordering Information
WIr-SS
HBA offers a web based Graphical User interface for IPOD®, IPAD®, IPHONE®, Android™, Blackberry® or any other Smartphone with a browser.
The wiSCAPE-APP provides control of wiSCAPE devices including:
• Wireless intelligent relays
• Wireless RF controls
• BACnet objects
• Preconfigured Scenarios
wiSCAPE APP
• The interface is web based so it doesn’t require any installation on the client device and is always up to date,
reducing maintenance and support cost to a minimum.
• Being linked to the same SQL database as the wiSCAPE Building Automation System, changes are immediately
reflected on all clients connected.
general Specifications
APP Requirements: wiSCAPE View software. Server running Microsoft IIS Internet or local area network connection
IPOD®, IPAD®, and IPHONE® are registered trademarks of Apple Inc., registered in the U.S. and other countries.
Android™ is a trademark of Google Inc.
BlackBerry® is the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Used under licence from Research In Motion Limited.
Hubbell Building Automation's wiSCAPE BACnet software module allows easy interfacing of wiSCAPE control system and modules with the
Building Automation Systems BACnet.
BACnet was chosen as the integration platform, for integrating with traditional building automating systems, while promoting the use of intelligent
addressable wireless controls & sensors that do not require dedicated control wiring, making it ideal for both new and retrofit projects.
wiSCAPE BACnet Software Module
PAgE 202 hubbell-automation.com
The wiSCAPE Gateway Cellular Modem is a secure Ethernet gateway ideal for customers
requiring 24/7 broadband connectivity. With simple installation and configuration
requirements, the Gateway Cellular Modem is designed to handle robust, fixed applications
requiring broadband communication speeds and bandwidth.
PRODUCT fEATURES
• Persistent 3G Network
• Connectivity
• Low Power Consumption
• Compact Size for Easy Integration
• Rugged Aluminum Case
• Remote Management and Configuration
• Five-year limited1.1”
wiSCAPETM gateway Cellular Modem WIRELESS STREET LIgHTINg CONTROLS
3”
WIRELESS
WIR-MOD-GPRS
3.7”
PAgE 203(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELWIr-Mod-gPrS GPRS Cell Modem add-on option for
wiSCAPE Gateways
general Specifications
Security IPsec VPN GRE Tunneling Events Reporting Engine Routing Protocols Highly Configurable
Technology HSUPA with fallback to: HSDPA, UMTS, EDGE, GPRS, GSM EV-DO Rev. A with fallback to: CDMA, EV-DO Rev. 0, CDMA 1x, CDMA IS-95
Bands Tri-Band UMTS/HSDPA/HSUPA, 850, 1900, 2100 MHz Quad-Band GPRS/EDGE, 850, 900, 1800, 1900 MHz Dual-Band EV-DO Rev. A, 800, 1900 MHz
Quad-Band UMTS/HSDPA/HSUPA, 850, 900, 1900, 2100 MHz
Host Interfaces Ethernet: 10/100 BASE-T RJ-45 USB Type B5 Pin Mini
Antenna Connections Cellular - 50 Ohm SMA Receive Diversity 50 Ohm SMA
I/O Ports 2
LED Indicators Network Signal Activity Power
Operating Temperature -22°F to 158°F (-30° to +70°C)
Storage Temperature -40°F to 185°F (-40° to +85°C)
Dimensions 3.0”W x 1.1”H x 3.7”L
Weight 7.1 oz
Certifications FCC RoHS PTCRB CE
Warranty Five-year limited
ordering Information
WIr-Mod-gPrS
PAgE 20 4 hubbell-automation.com
The wiSCAPE™ Modem allows the user to wirelessly connect their notebook or
desktop PC to the wiSCAPE wireless street lighting system via their computer’s
USB port. The wiSCAPE Modem allows the user to remotely manage, monitor, and
meter their wiSCAPE System through wiSCAPE View™ software on their computer.
PRODUCT fEATURES
• Low Power Consumption
• Compact Size for Easy Integration
• Rugged Case
• Remote Management and Configuration
• Five-year limited
1.5”
wiSCAPETM Modem WIRELESS STREET LIgHTINg CONTROLS
WIRELESS
WIR-MODEM
2.25”
PAgE 20 5(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELWIr-ModEM wiSCAPE Modem with USB
Connection
general Specifications
Operating Voltages Powered from USB port
Connector Type USB 2.0 Type B
Communication Type Wireless RF MESH 2.4GHz – 802.15.4 ISM FCC compliant (FCC ID: OUR-XBEE)
Range RF Mesh : 300 ft per hop
LED Indicators Green = Power OK Yellow = Transmitting Red = Receiving
Dimensions 4”L x 2.25”W x 1.5”H
Warranty Five-year limited
ordering Information
WIr-ModEM
PAgE 20 6 hubbell-automation.com
wiSCAPETM Photo SensorWIRELESS STREET LIgHTINg CONTROLS
Hubbell Building Automation’s wiSCAPETM Photo Sensor provides the necessary
daylight-level information to the wiSCAPE Fixture Modules. Using a photodiode
element, this sensor continuously measures daylight levels and sends the information
to the module. The applicable foot-candle range is selected by using a jumper
beneath the front cover.
PRODUCT fEATURES
• Interfaces with Energy Management Systems
• Foot-candle range: 50 - 750FC
• Mounts horizontally
• UL and cUL listed
• California Title 24 Compliant
• Five-year limited warranty
DAYLIGHTHARVESTING
DLCPCO
Correct orientation shown
1.85”
1.35”
24VDC
LOW
VOLTAGE
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 207(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
MODELdlcPco Outdoor Photocell Sensor, 50 - 750FC
ordering Information
general Specifications
Accuracy +/-1% at 70°F (21°C Derated to +/-5% at 120°F or at) F (-18°C to 49°C)
Operating Temperature 13°F to 140°F (-11°C to 60°C)
Sensor Type Blue-enhanced photo diode
Sensor Ranges 50-750FC
Input Voltage 24VDC
Output Voltage 10V full output
Output Offset 0VDC or 1VDC - total darkness
Wiring Three conductors 18-gauge standard cable Red: Pos. DC input Black: DC common Yellow: Output to EMS
Certifications ETL/UL 916 Listed Title 24 Listed RoHS compliant
Warranty Five-year limited
dlcPco
PAgE 20 8 hubbell-automation.com
PRODUCT fEATURES
wiSCAPE™ KeypadWIRELESS STREET LIgHTINg CONTROLS
WIR-KP
• 6 programmable buttons for a total of 6 possible scenarios
• Sends any user-programmable commands to an unlimited number
of receivers
• Compact design to be easily installed in standard electrical boxes
• Fits standard Decorator Style wallplate (sold separately)
general Specifications
Operating Voltage 15-30VDC
Mounting Standard single gang electrical box
Dimensions 1.6”W x 4.0”H x 1.7”D
Other Requirements: Requires appropriate wiSCAPE PLC for system operation
ordering Information
• Low power consumption
• LED Feedback on each button
• Reprogrammable over the air
• Five-year limited warranty
MODELWIr-SW-kP6-WH wiSCAPE Keypad
WIr-SW-kP6-WH
The wiSCAPE™ Keypad is designed to be integrated with wiSCAPE Wireless
Street Lighting Controls. The compact and versatile design features 6 buttons,
each capable of being programmed to activate sophisticated lighting scenarios.
In conjunction with wiSCAPE enabled fixtures, a scenario could include a single
fixture or entire groups of fixtures.
As with all wiSCAPE Fixture Modules, the keypad is configured through wiSCAPE
View™ software. Once configured, the keypad will not require the presence of a
computer or central controller on the network.
24VDC
LOW
VOLTAGE
PAgE 20 9(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
WIRELESS STREET LIgHTINg CONTROLS
End Mount wiSCAPE WASP2 Sensor with Lens option
Hubbell Building Automation’s wiSCAPETM WASP2TM Motion Sensor is specifically
designed for ON/OFF control of street lighting. The motion sensor is also
available for low-mount applications when using the appropriate lens. The sensor
is available in end-mount and surface-mount versions with either single or dual
outputs.
PRODUCT fEATURES
• Digital Passive Infrared (PIR) sensor
• Supported maximum mounting heights:
• High mount lens: up to 30 ft outdoors; 45 ft indoors
• Multiple (single and dual) output versions
• Unique Smart Cycling™ for improved lamp life
• End-mount and surface-mount versions
• Withstands low temperature and conforms to IP65 water-tight
standards
• UL and cUL listed
• Five-year limited warranty
4.0”
InterchangeableLens Options
High Impact PlasticDesign
1.5”
wiSCAPE WASP2TM Motion Sensor
OCCUPANCYSENSING
SMART CYCLING
DAYLIGHTHARVESTING
RATED
WATER-DUST RESISTANT
IP65
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
PAgE 210 hubbell-automation.com
general Specifications
Power Requirements Low Voltage sensors: 24VDC
User Interface (1) Twelve pin DIP switch
Time Delay Primary: 8-second test mode - 4, 8, 16 and 30 minute timeouts Secondary: Can be disabled (switches off with primary timer) - 30, 60 and 90 minute timeouts
Passive Infrared Dual element pyrometer and spherical Fresnel lens designed for robust detection of a walking person. When used with program start ballast, a 1-2 second delay from occupancy detection to lamp turn-on may be experienced.)
Daylight Sensor Range: 30 – 2500FC End mount sensor: Downward and upward looking daylight sensors (Direction selectable via DIP switch) Surface mount sensor: Downward looking daylight sensor only
Interchangeable Lens Options Lens options: (Lenses sold separately – not included with sensor module) Low Mount/High Mount Indoor/Outdoor Coverage: 360°, 180°, Aisle, Half Aisle
Operating Environment Relative humidity (non-condensing): 0% to 95% Low-temperature/Water-tight/Indoor-Outdoor version: -40° to 149°F (-40° to 65°C)
Construction Sensor Module and Lens Assembly – high impact, injection-molded plastic
Dimensions 4.0”DIA x 1.5”H
Weight 7 oz.
Color White, Black and Gray
Mounting End mount sensor: Mounts directly to end of fixture through extended ½” chase nipple For deeper body fixtures, an optional Extender Adapter (available separately) positions the sensor flush or below the bottom of the reflector for a full field-of-view. Surface mount sensor: Mounts directly to fixture or j-box via (2) 1.25” stainless steel screws and locking nuts
Certifications Conforms to UL STD 508, UL STD 244A Conforms to IP65 (Low-temperature/Water-tight version)
Warranty Five-year limited
Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens
Sensor Lens Coverage and Detection Patterns When Mounted at 30ft
PAgE 211(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com
Example: WSP EM 24V LWO – Wasp End Mount Sensor, 24V, Low Temp/Water Tight, White
SENSOR MODELWSP
MOUNTINgEM - End MountSM - Surface Mount
INPUT vOLTAgE 24V - 24VDC (Low Voltage)
LOW-TEMP/ WATER TIgHTlWo - Low-Temp/Water Tight/ Indoor/Outdoor
WSP
ordering Information
for appropriate lens options please reference WASP2 Occupancy Sensor Lens Specification Sheet.
COLORblank - Whitebk - BlackgY - Gray
WSP 24V
Emergency lighting bypass controls
PAgE 212
Emergency lighting is a critical component when laying out a lighting system. The system requirements are defined by local
codes which determine the amount of emergency lighting required to meet minimum lighting levels during a loss of power.
How these levels are attained is dependent on the design of the lighting system. Hubbell Building Automation’s emergency
lighting bypass lighting controls offer several options for emergency lighting applications. All HBA products are specifically
UL listed and labeled for use in emergency lighting.
Providing Safety and Savings
(8 8 8) 698 -3242 | fA X OR DERS (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 213
hubbell-automation.comPAgE 214
EMERgENCY LIgHTINg BYPASS CONTROLS
UL924 Enclosed 20 AMP Bypass Shunt Relay
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA 120277
VAC
Hubbell Building Automation’s enclosed 20 Amp electrically held UL 924 Bypass
Shunt Relays provide an isolated normally closed contact that can be used to
provide bypass shunt to power emergency egress lighting directly from the
emergency generator source. The coil in these relays is powered by a normal
power supply.
When the loss of commercial power occurs, the contact returns to its normally
closed state and bypasses control to the emergency egress lighting. These fixtures
will remain connected directly to generator emergency source until transfer back
to normal power occurs.
PRODUCT fEATURES
• 20 Amp 120/277VAC Relay
• N/C isolated contacts
• UL listed
• No minimum load requirement
• Five-year limited warranty
UL924SR
3.75”
1.75”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 215
general Specifications
# Relays & Contact Type One (1) SPST Continuous Duty Electrically Held Coil
Contact Ratings 1500 VA Tungsten @ 120VAC 20 Amp Ballast @ 120/277VAC 2 HP @ 277VAC 1 HP @ 120VAC
Coil Current 0.06 A @ 120VAC 0.06 A @ 277VAC
Coil Voltage Input UL924SR1: 120VAC; 60Hz
UL924SR2: 277VAC; 60Hz
Operating Environment Indoor use only 32° to 140°F Relative humidity (non-condensing): 0% to 95%
Dimensions 3.75”L x 1.75”W x 1.25”H with mounting ears for 1-gang box
Housing Rating Plenum, NEMA 1
Flame Rating UL94V-0
Wires 7”, 105° C, 600V Rated
Certifications UL Listed, UL924
Warranty Five-year limited
ModElul924Sr1 UL924 N/C Shunt Relay 120/277V, 20A SPST with 120VAC Coilul924Sr2 UL924 N/C Shunt Relay 120/277V, 20A SPST with 277VAC Coil
ordering Information
hubbell-automation.comPAgE 216
EMERgENCY LIgHTINg BYPASS CONTROLS
UL924 Enclosed 20 AMP Bypass Relay with Remote Emergency Control
120277
VAC
Hubbell Building Automation’s enclosed 20 Amp electrically held UL 924 Bypass
Relay is specifically designed for projects requiring bypass utilizing an unswitched
emergency circuit that is not controlled by a relay in a panel or power pack. The
control of the lighting on the emergency circuit is switched ON and OFF based on
the normal circuit switching input to the unit. When the loss of commercial power
occurs, the contact returns to its normally closed state and bypasses control to the
emergency egress lighting.
The unit includes an automatic test function that simulates utility power failure
and holds emergency lighting on for 2.5 seconds each time the switched input is
turned OFF.
PRODUCT fEATURES
• 20 Amp 120/277VAC Relay
• Available with Dual Tap 120VAC or 277VAC Coil
• N/C isolated contacts
• UL listed
• No minimum load requirement
• Five-year warranty
UL924BRUNV
3.75”
1.75”
1.25”
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 217
general Specifications
# Relays & Contact Type One (1) SPST Continuous Duty Electrically Held Coil
Contact Ratings 1500 VA Tungsten @ 120VAC 20 Amp Ballast @ 120/277VAC 2 HP @ 277VAC 1 HP @ 120VAC
Coil Current 0.06 A @ 120VAC 0.06 A @ 277VAC
Coil Voltage Input UL924BRUNV: 120 or 277VAC; 60Hz
Operating Environment Indoor use only 32° to 140°F Relative humidity (non-condensing): 0% to 95%
Dimensions 3.75”L x 1.75”W x 1.25”H with mounting ears for 1-gang box
Housing Rating Plenum, NEMA 1
Flame Rating UL94V-0
Wires 7”, 105° C, 600V Rated
Certifications UL Listed, UL924
Warranty Five-year limited
ModElul924bruNV UL924 Emergency Control Relay (Shunt or Bypass) with
auto test 120-277VAC Coil
ordering Information
ul924bruNV
hubbell-automation.comPAgE 218
EMERgENCY LIgHTINg BYPASS CONTROLS
UL924 Enclosed 20 AMP Automatic Power Transfer Control Relay
Hubbell Building Automation’s enclosed 20 Amp Emergency Power Transfer
Control Relay is a versatile, cost-effective unit, specifically designed for projects
requiring hot and neutral switching of the load from normal circuit to emergency
circuit or that include the requirement that 0-10V dimming circuits be brought to
full brightness during the emergency transfer event.
The unit senses loss or voltage drop of the normal utility source and within 1.5
seconds transfers the load including the neutral to the emergency source. When
power is restored, the unit transfers the load back to normal utility power within 1.5
seconds. An integral momentary test switch simulates utility power failure and can
be activated at any time. Any interruption of normal utility power will automatically
transfer designated emergency lights to full bright regardless of current dim level
or ON/OFF state of the system.
PRODUCT fEATURES
• 20 Amp 120/277VAC Relay
• N/C isolated contacts
• 0-10V Dimming Control to Full upon Transfer
• UL listed
• No minimum load requirement
• Five-year warranty
UL924BRLN
120277
VAC
TITLE
24
CO
MP
LIAN
T
CA
LIFO
RN
IA
CEC
5.25”
2.25”5.25”
(8 8 8) 698 -3242 | Fa x o rd e r s (512) 4 50 - 0 86 4 | hubbe l l - au toma t ion .com PAgE 219
general Specifications
# Relays & Contact Type Six (6) SPST Continuous Duty Electrically Held Coil with Time Delay
Contact Ratings 1800 VA Tungsten @ 120VAC 20 Amp Ballast @ 120/277VAC
Coil Current 0.06 A @ 120VAC 0.06 A @ 277VAC
Coil Voltage Input UL924BRLN1: 120VAC; 60Hz
UL924BRLN2: 277VAC; 60Hz
Operating environment Indoor use only 32° to 140°F Relative humidity (non-condensing): 0% to 95%
Dimensions 5.125”H x 5.125”W x 2.25”D with mounting holes for 4 11/16” deep box
Housing Rating Plenum, NEMA 1
Flame Rating UL94V-0
Wires 7”, 105° C, 600V Rated
Certifications UL Listed, UL924
Warranty Five-year limited
ModElul924brlN1 UL924 Emergency Transfer Control Relay with manual test 120V Coil,
0-10V control
ul924brlN2 UL924 Emergency Transfer Control Relay with manual test 277V Coil, 0-10V control
ordering Information
for use with lX, cX Panels, Power Packs and wiHubb™ Smart Packs.
1 Switched with Normal Load when Normal Power is available. Held ON when Normal Power is not available and Emergency Power is available.
2 Switched with Normal Load when Normal Power is available. Not powered when Normal Power is not available.
INDEXVacaNcY & occuPaNcY SENSorS
LightHawk2™—Dual Technology Wall Switch Sensor featuring IntelliDAPT® ....................................................................................................... 10
LightHawk2—Ultrasonic Wall Switch Sensor featuring IntelliDAPT .......................................................................................................................... 12
LightHawk2—Passive Infrared Wall Switch Sensor featuring IntelliDAPT ................................................................................................................ 14
LightHawk2— Night Light Passive Infrared Wall Switch Sensor featuring IntelliDAPT ........................................................................................... 16
LightHawk2— Dimming Passive Infrared Wall Switch Sensor featuring IntelliDAPT .............................................................................................. 18
OMNI™ Dual Technology Ultrasonic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ........................................................................... 20
OMNI Ultrasonic Ceiling Sensor featuring IntelliDAPT .............................................................................................................................................. 22
OMNI Passive Infrared Ceiling Sensor featuring IntelliDAPT .................................................................................................................................... 24
OMNI Dual Technology Acoustic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ................................................................................. 26
OMNI-BPTM Dual Technology Ultrasonic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ..................................................................... 28
OMNI-BP Ultrasonic Ceiling Sensor featuring IntelliDAPT ........................................................................................................................................ 30
OMNI-BP Passive Infrared Ceiling Sensor featuring IntelliDAPT .............................................................................................................................. 32
OMNI Dual Technology Acoustic and Passive Infrared Ceiling Sensor featuring IntelliDAPT ................................................................................. 34
LightOWL™ Dual Technology Ultrasonic and PIR Wall Sensor featuring IntelliDAPT ........................................................................................... 36
LightOWL Passive Infrared Wall Sensor featuring IntelliDAPT .................................................................................................................................. 38
LightOWL Dual Technology Passive Infrared and Acoustic Sensor featuring IntelliDAPT ..................................................................................... 40
Manual ON | Automatic OFF Passive Infrared Wall Switch Sensor ........................................................................................................................... 42
Automatic Passive Infrared Wall Switch Sensor ........................................................................................................................................................... 44
Digital Programmable Timer ....................................................................................................................................................................................... 46
LVS Series Low Voltage Switches .................................................................................................................................................................................. 48
HBA Tracker ..................................................................................................................................................................................................................... 49
Universal Voltage Power Packs ...................................................................................................................................................................................... 50
Universal Voltage Power Pack with Manual ON|OFF Control ................................................................................................................................... 52
RR1 Line Voltage Auxiliary Relays ................................................................................................................................................................................. 54
RRU—Line Voltage Auxiliary Relays .............................................................................................................................................................................. 56
Ceiling and Wall Mount Sensor Accessories ............................................................................................................................................................... 57
HBA WASP2 Occupancy Sensor ................................................................................................................................................................................... 59
Dimming WASP Occupancy Sensor ............................................................................................................................................................................. 62
WASP Lens Options ....................................................................................................................................................................................................... 65
daYlIgHtINg coNtrolSZone5™ Control Module ............................................................................................................................................................................................... 68
Zone5 Ceiling and Wall Mount Occupancy Sensors .................................................................................................................................................. 70
Zone5 Low Voltage Wall Switches ................................................................................................................................................................................ 72
Zone5 RJ45 Adapter ....................................................................................................................................................................................................... 74
Zone5 Daylight Sensor ................................................................................................................................................................................................... 76
DLC7 Continuous Dimming Control ............................................................................................................................................................................ 78
Photocell Sensors ........................................................................................................................................................................................................... 80
Photocell Controller ......................................................................................................................................................................................................... 82
Luxstat Dimming Control Module ................................................................................................................................................................................ 84
Luxstat ON/OFF Control Module ................................................................................................................................................................................. 86
Luxstat Power Pack ......................................................................................................................................................................................................... 88
Luxstat Single Zone ON/OFF Control Module ........................................................................................................................................................... 90
Luxstat Day/Night Control Module with Clock ........................................................................................................................................................... 92
Luxstat Light Sensor ....................................................................................................................................................................................................... 94
Luxstat Low Voltage Wall Switches ............................................................................................................................................................................... 96
lIgHtINg coNtrol PaNElS LX Lighting Control Panels ........................................................................................................................................................................................... 100
LX Relays ......................................................................................................................................................................................................................... 102
LX Breaker Control Panels ............................................................................................................................................................................................ 104
LX Circuit Relays and Circuit Breakers for LXBC ......................................................................................................................................................... 106
LX Touch Tablet Graphical User Interface ................................................................................................................................................................... 108
LX Terminator ................................................................................................................................................................................................................. 109
LX Building Automation ProtoNode ........................................................................................................................................................................... 110
LX JENsys........................................................................................................................................................................................................................ 112
LX Networked Switch Stations ..................................................................................................................................................................................... 114
LX Keyed Switch Station ............................................................................................................................................................................................... 116
LX Occupancy Sensor featuring IntelliDAPT .............................................................................................................................................................. 118
LX Photo Sensor Control Module and Sensors .......................................................................................................................................................... 120
LX Dry Contact Interface Module ................................................................................................................................................................................ 122
LX Automatic Line Voltage Switches ........................................................................................................................................................................... 124
LX Link Power Module ................................................................................................................................................................................................... 126
LX Router Repeater ....................................................................................................................................................................................................... 128
LX Power Supply ............................................................................................................................................................................................................ 130
LX Enclosure for DIN Rail Modules .............................................................................................................................................................................. 132
LX Panel Wire Way Divider Accessory Kit ................................................................................................................................................................... 133
LX Networked Cable|Riser Rated—Riser Rated Belden 8471 Cable ....................................................................................................................... 134
LX Networked Cable|Plenum Rated—Plenum Rated Windy city Wire 104500 Cable ........................................................................................... 136
CX Series Commercial Lighting Control Panels ......................................................................................................................................................... 140
CX Series Commercial Lighting Control Panel Relays ............................................................................................................................................... 142
CX Dimming Option Card ............................................................................................................................................................................................ 144
CX Series Low Voltage Switches .................................................................................................................................................................................. 145
CX Light Sensor.............................................................................................................................................................................................................. 146
CX Line V Automatic Line Voltage Switches ............................................................................................................................................................... 148
CX Occupancy Sensors ................................................................................................................................................................................................. 150
WIrElESS coNtrolSwiHUBB® Access Point ...................................................................................................................................................................................................154
wiHUBB Access Point 2.0 ...............................................................................................................................................................................................156
wiHUBB Smart Pack ........................................................................................................................................................................................................158
wiHUBB Ceiling and Wall Mount Occupancy Sensors ...............................................................................................................................................160
wiHUBB Switch Stations .................................................................................................................................................................................................162
wiHUBB In-Fixture Module ............................................................................................................................................................................................164
wiHUBB On-Fixture Module ..........................................................................................................................................................................................166
wiHUBB Building Automation System Gateway Interface .........................................................................................................................................168
wiHUBB Antennas and Cables ......................................................................................................................................................................................170
wiHUBB RJ45 Adapter and Cables ...............................................................................................................................................................................172
wiHUBB Daylight Sensors ..............................................................................................................................................................................................174
wiSTAR™ In-Line Switch Module ..................................................................................................................................................................................176
wiSTAR Plug-In Switch Module .....................................................................................................................................................................................178
wiSTAR Light Sensor .......................................................................................................................................................................................................180
wiSTAR Ceiling Mount Sensor .......................................................................................................................................................................................182
wiSTAR Wall Mount Ceiling Sensor ..............................................................................................................................................................................184
wiSTAR Key Card Switch ................................................................................................................................................................................................186
wiSTAR Wall Switch .........................................................................................................................................................................................................188
wiSCAPE™ Gateway ......................................................................................................................................................................................................192
wiSCAPE Fixture Module ...............................................................................................................................................................................................194
wiSCAPE 480V Fixture Module .....................................................................................................................................................................................196
wiSCAPE PLC ..................................................................................................................................................................................................................198
wiSCAPE Software Suite ................................................................................................................................................................................................200
wiSCAPE Cellular Modem .............................................................................................................................................................................................202
wiSCAPE Desktop Modem ............................................................................................................................................................................................204
wiSCAPE Photo Sensor ..................................................................................................................................................................................................206
wiSCAPE Key Pad ...........................................................................................................................................................................................................208
wiSCAPE WASP2 Motion Sensor ..................................................................................................................................................................................209
EMErgENcY bYPaSS coNtrolS
UL924 Enclosed 20 AMP Bypass Shunt Relay ............................................................................................................................................................ 214
UL924 Enclosed 20 AMP Bypass Relay with Remote Emergency Control ............................................................................................................. 216
UL924 Enclosed 20 AMP Automatic Power Transfer Control Relay ....................................................................................................................... 218
Alera Lighting
Architectural Area Lighting
Beacon Products
Columbia Lighting
Compass Life Safety
Devine Lighting
Dual-Lite
Hubbell Building Automation
Hubbell Industrial
Hubbell Outdoor
Kim Lighting
Kurt versen
LiteControl
Norlux/TRP
Prescolite
Progress Lighting
Security Lighting Systems
Spaulding Lighting
Sportsliter Solutions
Sterner
Whiteway
701 Millennium Blvd.greenville, SC 29607hubbelllighting.com
9601 Dessau Road | Building One | Austin, Texas 78754 | 512-450-1100 | 512-450-1215 fax | www. hubbell-automation.com