2015-17 MUSTANG GT350 INTAKEMANIFOLD INSTALLATION KIT

Flanged/Studded Bolt – This bolt is installed on the EVAP solenoid, and has the extended, threaded stud, to allow the factory wiringharness retainer to be reinstalled. Whilestanding at the front of the vehicle, this bolt will be installed on the right side of the EVAP solenoid. Encluded is the wiring/hose retainer. This can be used on the studded bolt to retain the vacuum hoses and prevent the hoses from moving.

Flanged Bolt – This bolt is installed onto the EVAP solenoid on the opposite side of the studded flange bolt. This kit contains 6 bolts. for the correct installation, you will only need one.

Degas Hose – This hose is included to allow the routing of the degas hose to be routed under the intake tube for a cleaner installation. Retaining clamps is included.

EVAP Extension Harness – The extension harness included is designed to extend the wiring harness to accommodate the di�erent orientation of the EVAP solenoid. This extension plugs into the factory wiringharness, and does not require cutting.

Hex Head Bolt – The small hex head bolt is installed to retain the PCV inlet tube to the intake manifold