oracle.testinsides.1z0-581.v2016-12-13.by.melissa · 2016-12-13 · 1z0-581 passing score : 800...

http://www.gratisexam.com/

1Z0-581

Passing Score: 800Time Limit: 0 min



Exam A

QUESTION 1Why does it matter if the source power for a PDU is 115v, 208v, or 230v?


A. The Bricks, Slammers, and Pilots will draw different amperes depending on the input to the PDU.B. The Bricks and Slammers will draw different amperes depending on the input to the PDU but the Pilot will not draw much to make a difference.C. The Bricks and Pilots will draw the same amperes and not enough to make a difference but the

Slammers will draw different amperes depending on the input to the PDU.D. It does not matter because the Bricks, Slammers, and Pilots will draw the same amperes.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation: The Pillar Axiom 600 system components must be plugged into the PDUs such that they do not exceed the amperage rating of any outlet group. If you exceed theamperage rating, the circuit breakers trip.Except where indicated, the maximum rated amperage of the outlet banks remains the same regardless of the electrical service voltage. Therefore, componentsdraw about half the amperage at 230V than at 115V, and you can plug more components into each power distribution unit (PDU).The table below lists the maximum electrical requirements of the Pillar Axiom 600 components.Each component has redundant power cords plugged into different PDUs on separate circuits.Table Pillar Axiom 600 electrical requirements Reference: Pillar Axiom 600 Hardware installation Guide, Component Power Usage

QUESTION 2Identify the information required during the installation of the Axiom VSS plug-in. Select all that apply.

A. User NameB. PasswordC. System Serial Number


D. VSS Provider NameE. Port Number

Correct Answer: ABCSection: (none)Explanation

Explanation/Reference:Explanation: Download and Install the VSS Provider Plug-In Download the Pillar Axiom VSS Provider plug-in from the Pillar Axiom Storage Services Manager for installation onyour SAN host. Prerequisites:* The SAN host must have TCP/IP connectivity, over Ethernet, to the Pilot management controller.* For the VSS Provider to create volume shadow copies, the SAN host must have Fibre Channel connectivity to the Slammer storage controller.* During the installation, you need the system serial number, user name, and password.Note: The Microsoft Volume Shadow Copy Service (VSS) Provider plug-in enables the use of VSS-enabled backup applications with the Pillar Axiom 600 system.VSS enables data protection and management services through a standard set of configuration and monitoring capabilities. These capabilities include creating,manipulating, and restoring snapshots without shutting down applications or essential services.Reference: Pillar Axiom Administrator's GuideDownload and Install the VSS Provider Plug-In

QUESTION 3Indentify what must be required in order to receive alerts and email notifications from the Axiom storage system.

A. Email serverB. SNMP hostC. Call Home enabledD. Primary Administrator created


Explanation/Reference:Explanation: You must designate one or more recipients to receive an event notification and define an email server to receive the notifications.Note: This email server is also used to send CallHome notifications to the OraclePillar Customer Support.Note: An event notification, when enabled, is defined as follows:A Simple Mail Transfer Protocol (SMTP) email message that notifies recipients of specified system events. System events include informational, warning, or criticalevents such as the creation of a logical volume or the occurrence of a hardware or software problem. Event notifications are optional and supplement normal eventlogging and CallHome notification. (Formerly called an alert).


Reference: Pillar Axiom Administrator's Guide, About Managing Event Notifications

QUESTION 4The storage administrator needs to download the CLI for scripting purposes. Identify where administrator should go to download the CLI.

A. the HTML from the Pilot:B. the customer FTP siteC. the Support tab in the AxiomONE GUID. the customer support centerE. the customer support portal

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation: To run the Pillar Axiom CLI, you must first download the software.Perform this task on the workstation from which you will manage the Pillar Axiom storage system.1 Log in to the graphical user interface (GUI).2 Click the Support icon in the top context pane.3 Click the command line interface (CLI) link in the left navigation pane.4 Choose a download option from the Actions drop-down list for your workstation environment.5 Follow the prompts to download the software.6 Extract the software to a folder on your local workstation.Note: The Pillar Axiom CLI is the command line interface for configuring and monitoring a Pillar Axiom system. The Pillar Axiom CLI provides the same capabilitiesas the Pillar Axiom GUI, allowing configuration and management of the Pillar Axiom system performed from command line or through custom scripts.Reference: Pillar Axiom, CLI Reference Guide for axiom-cli, Download the Pillar Axiom CLISoftware

QUESTION 5The storage administrator is looking for a specific event in the event log. Identify three event severities that can be filtered.

A. InformationalB. CriticalC. ErrorD. WarningE. Normal


Correct Answer: ABDSection: (none)Explanation

Explanation/Reference:Explanation: The Pillar Axiom system generates events and classifies them by severity:Critical: Access to data is compromised.Warning: Administrator action is required to prevent a soft error from becoming a hard error or critical event.Informational: A configuration change has been detected or another non-error event has occurred.Reference: Pillar Axiom Administrator's Guide, Pillar Axiom event severities

QUESTION 6Which three Axiom storage system resources can the storage administrator monitor?


A. Running TasksB. Storage UsageC. System AlertsD. SAN Host PerformanceE. SAN Switch TasksF. Power Usage

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation: The Simple Network Management Protocol (SNMP) management information base (MIB) is self-documenting and lists Pillar Axiom system resources that you canmonitor Some of the Pillar Axiom resources that a system administrator can monitor are listed below.* Running Tasks* System Alerts.


* Storage UsageMonitoring short and long term trends in capacity usage helps the system administrator avoid getting an System Alerts warning that, for example, Clone LUNs arebeing deleted to free up capacity. Because you can over allocate logical volumes when taking advantage of the thin provisioning feature, such volumes need to bemonitored and may require additional physical storage.* CallHome or Manual Log Collection.* Software Versions* System Configuration* Traps* Scheduled TasksQuerying this resource allows the administrator to determine which tasks are scheduled and when they are scheduled. Knowing this information can be useful indetermining whether some traps or events can be expected.Reference: Pillar Axiom Administrator's Guide, System Components That Can Be Monitored

QUESTION 7Data Protection Manager gives you the capability to schedule backups of the application data on regular basis. Identify the name for the scheduled backups.

A. checkpointsB. consistency groupsC. point-in-time backupsD. application-aware backup

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation: The Pillar Axiom Data Protection Manager (DPM) is an application that manages application aware backup and recovery for the Pillar Axiom 600 system.Reference: Pillar Axiom Data Protection Manager, User's Guide

QUESTION 8The storage administrator would like to modify one of the system profiles. How can the storage administrator do this?

A. by selecting "Manage Standard Storage Profiles" and modifying the system profileB. by selecting "Manage Advanced Storage Profiles" and modifying the system profileC. by selecting "Manage Standard Storage Profiles" and duplicating the system profileD. by selecting "Manage Advanced Storage Profiles" and duplicating the system profile



Explanation/Reference:Explanation: Manage Storage Profiles DialogNavigation: Storage > Storage Profiles > Actions > Manage Storage Profiles Allows you to manage a set of Quality of Service (QoS) settings that can be used forcreating new logical volumes. You can create your own profile or duplicate an existing profile and then modify the duplicate to satisfy your needs.Manage Advanced Storage Profiles (expert users only)Provides access to the full set of QoS properties when creating a custom Storage Profile.Reference: Pillar Axiom Data Protection Manager, User's GuideManage Storage Profiles Dialog

QUESTION 9Identify what the default trending charts provide.

A. Default trending charts provide a quick overview of the most commonly referred to characteristics of the selected LUN over the last few hours.B. Default trending charts provide a quick overview of the most commonly referred to characteristics of the selected LUN over the last 24 hours.C. Default trending charts provide a detailed overview of the most commonly referred to characteristics of the selected LUN over the last few hours.D. Default trending charts provide a detailed overview of the most commonly referred to characteristics of the selected LUN over the last 24 hours.


Explanation/Reference:Explanation: Default trending charts provide a quick overview of the most commonly referred to characteristics of the selected LUN over the last few hours.Reference: Pillar Axiom Data Protection Manager, User's Guide, About LUN Statistics TrendingCharts

QUESTION 10The storage administrator is cabling the Axiom with copper FC cables. The power cords are being connected. Identify the best practice for installing the powercords.

A. Keep the copper cables and power cords separated to minimize EMI.B. Be sure to run the copper cables and power cords parallel with each other if they must cross.C. Be sure to run the copper cables and power cords perpendicular with each other if they must cross.


D. The copper cables and power cords can be bundled together.


Explanation/Reference:Explanation: Dress all power cables to the opposite side of the rack from any data cables.Reference: Pillar Axiom 600 Hardware installation Guide, Connect Power Cables

QUESTION 11The storage administrator is cabling the Axiom with copper FC cables. The power cords are being connected- Identify the best practice for installing the powercords.


A. Keep the copper cables and power cords separated to minimize EMI.B. Be sure to run the copper cables and power cords parallel with each other if they must cross.C. Be sure to run the copper cables and power cords perpendicular with each other if they mustD. The copper tables and power cords can be bundled together.


Explanation/Reference:Explanation: Dress all power cables to the opposite side of the rack from any data cables.Reference: Pillar Axiom 600 Hardware installation Guide, Connect Power Cables

QUESTION 12Identify the quality of service settings that will create a RAID10 volume.


A. Access Bias = RandomB. Access Bias = SequentialC. I/O Bias = WriteD. I/O Bias = ReadE. Access Bias= Write

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation: The other combination are either not valid or give RAID 5.See table below.Effects of access and I/O bias Note: The combination of the access bias and I/O bias QoS properties of a logical volume can have varying effects on certain performance characteristics of thatvolume.These performance characteristics can be effected by the access and I/O biases:* The amount of reading ahead performed by Slammers for the volume* The RAID configuration of the volume in the BricksReference: Pillar Axiom Administrator's Guide, Effects of Access Bias and I/O Bias

QUESTION 13Which VSS Provider CLI tool is used to configure additional systems?

A. pcli.exeB. axiomocli.exeC. registerAxim.exeD. vssadmin.exe


Explanation/Reference:Explanation: The VSS Provider installer allows you to configure a single Pillar Axiom system.To configure additional systems or remove systems, use the registerAxiom.exe command line tool.


Reference: Pillar Axiom Administrator's Guide, Download and Install the VSS Provider Plug-In

QUESTION 14Identify three hardware components contained in a Slammer.

A. Control UnitB. Network Interface ModuleC. Private Interconnect ModuleD. RAID ControllerE. ES Module

Correct Answer: ABCSection: (none)Explanation

Explanation/Reference:Explanation: A:A Slammer is a 4U, clustered storage subsystem that is the front end to a Pillar Axiom storage system. Slammer storage controllers contain two control units thatact in active-active mode to provide data and state mirroring.A, B, C: From the picture below you see the Network interface module, the CU leds, and thePrivate Connect Module. Reference: Pillar Axiom 600 Hardware installation Guide, Verify the Back Status LEDs

QUESTION 15Which identification mode is used to flash the LEDs on the component being replaced?

A. IdentifyB. Reverse IdentifyC. Replace ComponentD. View Details


Explanation/Reference:Explanation:


To identify physically the Brick you intend to rename, selectActions > Identify and, use the Identify dialog to flash the LEDs on the front and back of the selected Brick.Reference: Pillar Axiom 600 Hardware installation Guide, Rename the Bricks

QUESTION 16Identify the tasks of the Administrator 2 role.

A. shutting down the AxiomB. modifying global settingsC. creating volumesD. updating software


Explanation/Reference:Explanation: Administrator 1 A login account that has the authority to perform all administration, configuration, and recovery tasks.Administrator 2 A login account that has the authority to perform all administrative and configuration tasks, except:* Create, modify, or delete administrator accounts and File Servers.* Modify system wide settings such as Simple Network Management Protocol (SNMP) (not B)*Modify software or hardware configurations (not D)* Shut down the system (not A)Reference: Pillar Axiom Administrator's Guide,Create Administrator Account Dialog

QUESTION 17The storage administrator would like to view the current software version that is installed on the system. Identify the navigation tab that the storage administrator willneed to click.

A. SupportB. MonitorC. ManageD. Protect



Explanation/Reference:Explanation: You can display the versions of all software modules in your Pillar Axiom system.1 From the Support tab, click Software Modules.2 Review the displayed information to ensure that the versions are what you expect.The version information includes:* Drive and Enclosure Services (ES) firmware in the Brick storage enclosures.* Application software and operating system in the Pilot management controller.* Software (SAN) and programmable ROM (PROM) in Slammer storage controllers.Reference: Pillar Axiom Administrator's Guide,Display Software Versions

QUESTION 18The storage administrator is modifying a user account. The current user is not able to perform system updates. Which role should the user be assigned to be able toperform this task?


A. Administrator1B. Primary AdministratorC. AdministratorD. Monitor


Explanation/Reference:Explanation: Administrator1: A login account that has the authority to perform all administration, configuration, and recovery tasks.Incorrect answers,B. primary administrator is an account, not a role

QUESTION 19The storage administrator has installed MaxRep in the SAN environment. Identify how MaxRep communicates to the Pillar Axiom storage system for volumediscovery.


A. AxiomONE CLI commands through FCPB. AxiomONE CLI commands through TCP/IPC. SCSI commands through FCPD. SCSI commands through FCoE


Explanation/Reference:Explanation:Note: Initiate a Pillar Axiom iSCSI Session Use the iSCSI Login option when investigating iSCSI login problems to the Pillar Axiom system from the Pillar AxiomMaxRep Replication for SAN.1 To perform the iSCSI Login operation, navigate to Settings > Axioms > Toolkit for MaxRep.2 In the Select MaxRep Option page, select iSCSI Login and click Next.3 In the Select an Axiom page, select a Pillar Axiom system from those listed.4 Click Submit to initiate the login operation.5 At the confirmation prompt, click OK.

QUESTION 20Identify the function of a Storage Profile.

A. It determines the number of RAID groups that the; volume will be striped across and the stripe size.B. It specifies a set of QoS attributes that are used to optimize a logical volume for a specific application or task.C. It determines the amount of storage allocated to the volume based on the application that is using the volume.D. It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to a higher performance storage.


Explanation/Reference:Explanation: When configuring a logical volume, you can select a collection of predefined properties to apply to that volume. This collection of properties is called a StorageProfile.The following are some of the properties that define a Storage Profile:* Number of RAID groupsSpecifies the number of RAID groups across which the data is written (striped).* Strip size


Specifies the number of contiguous bytes to be stored on a single drive.Note:The default setting depends on the media type:64 KB for Fibre Channel (FC) media128 KB for serial ATA (SATA) media128 KB for solid state drive, single-level cell (SSD SLC) mediaReference: Pillar Axiom Administrator's Guide, About Storage Profiles

QUESTION 21The storage administrator is setting up an Axiom. Identify the number of IP addresses required for the Pilot.

A. 1B. 2C. 3D. 4


Explanation/Reference:Explanation: The management interface provides connectivity between the end user data network and the Pillar Axiom Pilot management controller. You can choose whichmethod to use to assign the primary IP addresses to the management interface on the Pilot:/ Dynamic Host Configuration Protocol (DHCP), which assigns a primary IP address dynamically when the Pilot starts./ Static IP Address assigns a permanent, primary IP address to a control unit (CU) in the Pilot as well as alternate IP addresses for the ports on the partner CU. Ifthe management software cannot access the primary IP address, it accesses an alternate IP address.

QUESTION 22Which hardware components are needed to increase bandwidth, assuming that there are IOP constraints?

A. BrickB. SlammerC. PilotD. Private Inter connect ModuleE. Private Management Interface

Correct Answer: BSection: (none)


Explanation

Explanation/Reference:Explanation:Note: IOP: Input Output oPerations

QUESTION 23Where does the AxiomONE Data Protection Manager records its events?


A. the system event logB. the log file on the hostC. the Event ViewerD. the/var/log/syslog file on the Pilot


Explanation/Reference:Explanation: Display the Event Log Review the event log to monitor events that have occurred in the Pillar Axiom system. If too many events display on the screen, you can applyfilters to the list.1 From the Monitor tab, click Event Log.2 Review the event log details to ensure that the information is what you expect.Note: Event logs display the system events of a Pillar Axiom system. Events include management actions such as the creation or deletion of LUNs and anyproblems encountered by the Pillar Axiom system, such as hardware issues or other problems detected in the Slammer or the Pillar Axiom management software.Reference: Pillar Axiom Administrator's Guide,Display the Event Log

QUESTION 24What are the two functions of a Storage Profile?

A. It provides a standardized set of quickly repeatable attributes for an application.B. It specifies a set of Quality of Service attributes that are used to optimize & logical volume for a specific application or task.


C. It determines the amount of storage allocated to the volume based on the application that is using the volume.D. It specifies thresholds which, when exceeded, may automatically initiate the copy of an underperforming volume to a higher performance storage.E. It specifics the Storage Domain to be used when creating the logical volume for a

specific application or task.

Correct Answer: ABSection: (none)Explanation

Explanation/Reference:Explanation: When configuring a logical volume, you can select a collection of predefined properties to apply to that volume. This collection of properties is called a StorageProfile.A: To help the storage administrator configure a volume, Pillar DataSystems provides a collection of Storage Profiles, each of which is optimized for one of several common applications.B: A Storage Profile defines the Quality of Service (QoS) settings for an individual logical volume.Reference: Pillar Axiom Administrator's Guide, System Storage Profile Properties

QUESTION 25Identify the SNMP ports for both queries and traps.

A. Use port 160 for queries.B. Use port 161 for queries.C. Use port 162 for queries.D. Use port 160 for traps.E. Use port 161 for traps.F. Use port 162 for traps.

Correct Answer: BFSection: (none)Explanation

Explanation/Reference:Explanation: SNMP uses the default UDP port 161 for general SNMP messages and UDP port162 for SNMP trap messages.

QUESTION 26When adding a user to the Axiom system, which role should be selected to allow the user to create volumes but not to update the Axiom system itself?


A. Administrator1B. Administrator2C. SupportD. Primary Support

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation: Administrator 2:A login account that has the authority to perform all administrative and configuration tasks, except:* Create, modify, or delete administrator accounts and File Servers.* Modify system wide settings such as SimpleNetwork Management Protocol (SNMP).* Modify software or hardware configurations.* Shut down the system.Reference: Pillar Axiom Administrator's Guide, Create Administrator Account Dialog

QUESTION 27The storage administrator is configuring an iSCSI host to boot from the SAN. Which hardware component is required for the iSCSI host?

A. The iSCSI host can use a NIC card to boot from the SAN.B. The iSCSI host must use a ToEcard to boot from the SAN.C. The iSCSI host must use a NIC card to boot from the SAN.D. The iSCSI host can use a ToE card to boot from the SAN.


Explanation/Reference:Explanation:Note: iSCSI host bus adapters (HBAs) are dedicated network interface controllers that do onboard iSCSI processing (called a TCP Offload Engine, or TOE).

QUESTION 28Which Axiom feature allows the segmentation of Bricks within the system?



A. Storage DomainB. Storage ProfilesC. Thin ProvisioningD. RAID10


Explanation/Reference:Explanation: Storage Domains allow storage administrators to assign logical volumes to a specific collection of Bricks. Such assignments can be made to reduce contentionamong volumes, to implement different levels of security for those volumes, or both.A Storage Domain is defined as:A subset of a virtual storage pool consisting of a defined group of Brick storage enclosures. This group can consist of any assortment of Bricks, regardless ofStorage Class, capacity, or any other attribute. A Storage Domain is typically used to provide specific allocation or security features for a collection of logicalvolumes.

QUESTION 29Which I/O Bias value should be assigned when the "read" activity exceeds the "write" activity?

A. WriteB. ReadC. SequentialD. RandomE. Mixed




You can use the I/O bias Quality of Service (QoS) property (in conjunction with the access bias property) to help optimize the performance of a logical volume. I/Obias, as a QoS property, indicates to the system the type of I/O operation that is the most common or expected for a particular volume. This bias can be one of thefollowing:Read Most requests from client applications are for read operations.Write Most requests from client applications are for write operations.Mixed Requests from client applications are likely equal for read and write operations.Reference: Pillar Axiom Administrator's Guide, About I/O Bias

QUESTION 30Identify the typical read community string value used by SNMP servers and clients.

A. publicB. privateC. axiomD. snmpE. axiomone


Explanation/Reference:Explanation: Community string Identifies the community string for use when the Pillar Axiom system sends an event trap to the SNMP host.Note: When an administrator does not specify a community string for readonly access, SNMP servers and clients will typically use public.Reference: Pillar Axiom Administrator's Guide, Create SNMP Host Dialog

QUESTION 31Which role is assigned to the pillar user?

A. Primary AdministratorB. SupportC. MonitorD. Pillar Support



Explanation/Reference:Explanation:Note:RoleIdentifies the role that is assigned to the administrator account. A role defines which permissions are granted to the administrator.Primary AdministratorAdministrator 1Administrator 2MonitorSupportPillar supportNote 2: You cannot disable the Primary system administrator or the PillarSupport accounts.

QUESTION 32The storage administrator is installing an Axiom in the existing SAN fabric environment. Which supported protocol will the storage administrator use to connect theAxiom?

A. iSCSIB. FCPC. NFSD. FCoE


Explanation/Reference:Explanation: Network File System (NFS)A file-sharing protocol that allows users who have Network File System (NFS) client software installed on their workstations to access data that is stored on a PillarAxiom storage system. Users can manipulate these files as though they were stored locally on their own drive.Pillar Axiom systems support NFS versions 2 and 3 commands over Transmission Control Protocol (TCP) and User Datagram Protocol (UDP).Compare Common Internet File SystemReference: Pillar Axiom, Glossary

QUESTION 33Identify the proper ways to connect the hardware power to the PDUs.


A. alternating circuit breakersB. filling up one circuit breaker before using the othersC. connecting half of the power on the hardware into one PDU and the other half into the second PDUD. connecting all Slammer CUs into one PDU and connecting all the Bricks and Pilots into the second PDUE. connecting all the power for the Slammers into one PDU and connecting all the hardware power into the second PDU


Explanation/Reference:Explanation: The Pillar Axiom 600 system components must be plugged into the PDUs such that they do not exceed the amperage rating of any outlet group. If you exceed theamperage rating, the circuit breakers trip.The power cords for each component must connect to separate PDUs, connected to separate power circuits.Note: 1 Review the Pillar Axiom 600 power requirements.2 Review the information about power cabling and verify that your PDUs meet the electrical requirements.3 Plug in your system components in such a way so that no PDU amperage limits are exceeded.4 Dress all power cables to the opposite side of the rack from any data cables.We recommend dressing the power cables to the left side (when facing the back of the cabinet).5 Secure the power cables to the rack such that they do not restrict the removal of any other component.Reference: Pillar Axiom Administrator's Guide,Connect Power Cables

QUESTION 34Which two checks should be performed if there are empty sockets in a PDU before use by the Axiom?

A. Verify the input voltage to the PDU.B. Add up the amperes used by each component according to the input voltage.C. Add up the amperes used by the Slammers according to the input voltage.D. Verify the output voltage to the PDU.E. Add up the amperes used by the Slammers according to the output voltage.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation:Note: The Pillar Axiom 600 system components must be plugged into the PDUs such that they do not exceed the amperage rating of any outlet group. If you exceed


the amperage rating, the circuit breakers trip.Except where indicated, the maximum rated amperage of the outlet banks remains the same regardless of the electrical service voltage. Therefore, componentsdraw about half the amperage at 230V than at 115V, and you can plug more components into each power distribution unit (PDU).Note2: PDU Outlet Amperage LimitsThe number of Pillar Axiom 600 system components you can plug into each Pillar supplied power distribution unit (PDU) varies.The Pulizzi TPC2105 shown in the following figure can use 115V, 208V, or 230V,30A (32A in Europe) electrical service. The overall amperage limits are 24A and the they are the same at any input voltage.Reference: Pillar Axiom 600 Hardware installation Guide,Component Power Usage

QUESTION 35Identify the role for the built-in administrator account.


A. Administrator1B. Pillar SupportC. Primary AdministratorD. Support


Explanation/Reference:

QUESTION 36Identify the protocols for monitoring the configuration of various system components.

A. Storage Management Initiative SpecificationB. Simple Mail Transport ProtocolC. Simple Network Management ProtocolD. TCP/IPE. iSCSI



Explanation/Reference:Explanation: Applications to monitor network devices, you can define SNMP trap hosts to receive Pillar Axiom traps. Any workstation that has an SNMP-based managementapplication installed on it can be a trap host.Pillar Axiom systems support SNMP version 2c. SET operations from SNMP management applications are not supported.Reference: Pillar Axiom Administrator's Guide,About SNMP Trap Host Management

QUESTION 37The storage administrator has implemented a multi-hop configuration using MaxRep. What is the minimal number of MaxRep engines required for this setup?

A. 2B. 3C. 4D. 6


Explanation/Reference:Explanation: A typical multi-hop replication configuration consists of a Pillar Axiom Replication Engine and two Pillar Axiom systems set up in a synchronous replicationrelationship at the primary site. In addition, another Replication Engine and Pillar Axiom system at the secondary site are set up in an asynchronous replicationrelationship with the secondary Pillar Axiom system on the primary site.When data from the application host is stored on the primary Pillar Axiom system on the primary site, the Replication Engine replicates any data changes to thesecondary Pillar Axiom system at the primary site. This is the synchronous hop of the multi-hop replication.Note: Pillar Axiom MaxRep Replication for SAN supports three basic types of replication configurations: synchronous, asynchronous, and multi-hop. Multi-hopreplication provides synchronous replication of a source LUN to a target LUN, and a second asynchronous replication of that target LUN to an additional target LUN.

QUESTION 38The storage administrator is creating a clone of volume ABC. Identify the parameters on the clone that the storage administrator can change.

A. Volume NameB. Volume GroupC. Storage Profile


D. Storage DomainE. Background Copy Priority

Correct Answer: ABDSection: (none)Explanation

Explanation/Reference:Explanation: A: Volume NameIdentifies the name that is assigned to a LUN for administrative purposes. LUN names must be unique across the Pillar Axiom system and must be 82 or fewer UTFcharacters, or 255 or fewer ASCII characters.B: Volume GroupAllows you to assign the LUN to an existing volume group.[...] Opens the dialog that allows you to create newVolume Groups.C: Storage ProfileIdentifies the set of QoS attributes applied to the LUN.[...] Opens the View Storage Profiles dialog that allows you to review the profile details.D: Storage DomainIdentifies the name of the storage domain associated with the LUN. Storage Domains allow storage administrators to assign logical volumes to a specific collectionof Bricks. Such assignments can be made to reduce contention among volumes, to implement different levels of security for those volumes, or both.Reference: Pillar Axiom Administrator's Guide, Create SAN Clone LUN, Quality of Service Tab

QUESTION 39Identify two things that happen to the Private Interconnect Topology Manager tool, PITMAN, when a warmstart of the Slammer occurs.


A. Private Interconnect Topology Manager terminates its operation when running in manual mode.B. Private Interconnect Topology Manager restarts Its operation when running in manual mode.C. Private Interconnect Topology Manager terminates its operation when running in automatic mode.D. Private Interconnect Topology Manager returns to a monitoring state when running in automatic mode.E. Private Interconnect Topology Manager suspends its operation when running In automatic mode.F. Private Interconnect Topology Manager suspends Its operation when running in manual mode.


Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation: A warmstart of the Slammer CU that is running PITMAN terminates its operation in the manual diagnostic mode and returns PITMAN to a monitoring state where itacts as a statistics generator.Note: The Private Interconnect Topology Manager (PITMAN) in the Automatic mode is a statistics generator tool that runs by default on the Pillar Axiom system tocollect high-level statistical and error information on the private interconnect (PI) (also known as the Storage System Fabric (SSF)) without disabling customeraccess to data.Reference: Pillar Axiom Administrator's Guide,About PITMAN Diagnostic Tool

QUESTION 40Which methods are available to the storage administrator for checking events?

A. Email AlertsB. SNMPC. Event ViewerD. Viewing the ASSM Event LogsE. Viewing var/log/syslog on the PilotF. Viewing var/log/dmesg on the Pilot

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation: A: Create event notifications so that you are notified when specific events occur in the Pillar Axiom system. You can specify the types of system events that triggeralerts as well as designate the recipients who receive the notices.1 From the Monitor tab, click Event Notification.2 Choose Actions > Create Event Notification.3 Enter a name for the event notification in the Name field.4 Enter a description in the Description field.5 To enable the notification, select Enable Event Notification.6 From the Monitored Events list, select the events for which you want to trigger the notification.Example:To be notified of any login failures, in the event tree, navigate down to the Informational > Audit list. Select the Login Failed item and then click the right facing arrow


to move the item to the Monitored Events column.7 To add one or more event notification recipients, click Add.8 Enter the email address of each notification recipient.D: Display the Event LogReview the event log to monitor events that have occurred in the Pillar Axiom system. If too many events display on the screen, you can apply filters to the list.1 From the Monitor tab, click Event Log.2 Review the event log details to ensure that the information is what you expect.Reference: Pillar Axiom Administrator's Guide,Create an Event Notification

QUESTION 41When the AxiomONE Path Manager is installed on the host, which types of failures is the host protected against?

A. HBA failureB. Pilot failureC. Slammer failureD. SANswitchfailureE. Brick failure

Correct Answer: CDSection: (none)Explanation

Explanation/Reference:Explanation:C: You can reduce the impact of failures in your Internet Small Computer System Interface (iSCSI) network by ensuring that iSCSI connections are made throughseveral network interface cards (NICs) on the host.We recommend using the normal IP configuration facilities to route connections to different Slammer storage controller ports through different host NICs. Forexample, if the host has two NICs available for iSCSI connections to a Slammer, you can set up routing to send all traffic to one port on each Slammer control unit(CU) through one NIC, and traffic to the other port on each Slammer CU through the other NIC.D: Supported iSCSI Routers and SwitchesPillar AxiomONE Path Manager (APM) supports the iSCSI-to-Fibre Channel routing features of the Cisco MDS 9000 family of multi-layer directors and fabricswitches.Note: AxiomONE Path Manager (APM) 3.1 has many features to facilitate LUN access from a storage area network (SAN) host.APM is defined as:Optional software installed on a storage area network (SAN) host to manage multiple paths to the Pillar Axiom storage system.APM performs the following primary functions:* Routes I/O to Pillar Axiom LUNs using only the best available data paths.* Shares traffic among the available paths and ensures that access to the LUNs is not interrupted if some paths fail.* Automatically configures the host into the AxiomONE Storage Services Manager and updates the configuration if the host information changes.Reference:


Pillar AxiomONE Path Manager 3.1, Installation Guide and Release Notes

QUESTION 42The storage administrator is adding a Slammer to the Axiom storage system. Identify the number of additional FC ports required in the SAN Fabric.

A. 4B. 2C. 3D. 6E. 8


Explanation/Reference:Explanation: NAS network interface module(NIM)A field replaceable unit (FRU) in a Slammer that is dedicated to network attached storage (NAS). A NIM has two or four Gigabit Ethernet ports for local area network(LAN) connectivity. A NAS Slammer holds two such FRUs (one per control unit). A NAS NIM may optionally contain a Fibre Channel (FC) host bus adapter tosupport FC tape devices and NDMP (Network Data Management Protocol) backup operations.Reference: Pillar Axiom Administrator's Guide,Create an Event Notification

QUESTION 43Which option in Create Event Notification activates the notification when the event occurs on the Axiom storage system?

A. Enable Event NotificationB. Monitored EventsC. DescriptionD. Email Notification Recipient Email AddressesE. Events not Monitored




Create an Event Notification Create event notifications so that you are notified when specific events occur in the Pillar Axiom system. You can specify the types ofsystem events that trigger alerts as well as designate the recipients who receive the notices. If you do not set up notices, you can still monitor system events usingthe event log. CallHome notifications are also independent of email notifications and will be sent to Pillar Data Systems about issues in the Pillar Axiom system.(See step 5 below):1 From the Monitor tab, click Event Notification.2 Choose Actions > Create Event Notification.3 Enter a name for the event notification in the Name field.4 Enter a description in the Description field.5 To enable the notification, select Enable Event Notification.6 From the Monitored Events list, select the events for which you want to trigger the notification.Example:To be notified of any login failures, in the event tree, navigate down to the Informational > Audit list. Select the Login Failed item and then click the right facing arrowto move the item to the Monitored Events column.7 To add one or more event notification recipients, click Add.8 Enter the email address of each notification recipient.9 (Optional) Click Test Email to make sure that the alert is sent to the correct email addresses and that the SMTP server is properly configured.Note: Allow at least 10 minutes between email tests.10 (Optional) To remove an email address from the list, select the address and click Remove.11 To save the new notification, click OK.Note: Create event notifications so that you are notified when specific Pillar Axiom system events occur. You may want to display the details of an event and makechanges as needed. You can also test notifications to make sure that the specified email addresses are correct.An event notification, when enabled, is defined as follows:A Simple Mail Transfer Protocol (SMTP) email message that notifies recipients of specified system events. System events include informational, warning, or criticalevents such as the creation of a logical volume or the occurrence of a hardware or software problem. Event notifications are optional and supplement normal eventlogging and Call Home notification. (Formerly called an alert).Reference: Pillar Axiom Administrator's Guide,About Managing Event Notifications

QUESTION 44Which best describes an event notification?

A. A Simple Mail Transfer Protocol (SMTP) email message that notifies recipients of specified system events.B. A Simple Mail Transfer Protocol (SMTP) email message that notifies recipients of default system eventsC. A Call-Home email message that notifies recipients of specified system events.D. A Call-Home email message that notifies recipients of default system events.




Explanation: An event notification, when enabled, is defined as follows:A Simple Mail Transfer Protocol (SMTP) email message that notifies recipients of specified system events.

QUESTION 45Which methods can be used to initiate Guided Maintenance?


A. pdscliB. axiomcliC. customer support centerD. Storage Services Manager

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation: B: As a companion product, the Pillar Axiom CLI can be used as well to manage aPillar Axiom system.D: The Pillar Axiom Storage Services Manager takes you to Guided Maintenance, which helps you through the process of resolving the hardware failure.Reference: Pillar Axiom Administrator's Guide,About Pillar Axiom Storage Services Manager

QUESTION 46Identify three available roles for a new user account created by the storage administrator.

A. Pillar SupportB. MonitorC. Primary AdministratorD. Administrator1E. Administrator2

Correct Answer: ABE


Section: (none)Explanation

Explanation/Reference:Explanation: The three roles with least permissions.Note: Role Identifies the role that is assigned to the administrator account. A role defines which permissions are granted to the administrator.Primary AdministratorAdministrator 1Administrator 2MonitorSupportPillar supportReference: Pillar Axiom Administrator's Guide, Administrator Accounts Overview Page

QUESTION 47The storage administrator has installed the AxiomONE Path Manager on a host. Identify the status displayed when the AxiomONE Path Manager software registersthe host Information on the Axiom system.

A. CommunicatingB. Not CommunicatingC. RegisteredD. no status displayed


Explanation/Reference:Explanation: For a SAN host that is managed by APM, the GUI shows the host as an associated host and its status as Registered.Reference: Pillar Axiom Administrator's Guide, About SAN Host Management

QUESTION 48The storage administrator has installed an Axiom. Identify the number of ports required on the switch for managing the Axiom.

A. 1B. 2


C. 3D. 4



QUESTION 49Identify how storage is assigned to a Storage Domain.


A. by BrickB. by volumeC. by RAID groupD. by storage class


Explanation/Reference:Explanation: Storage Domains allow storage administrators to assign logical volumes to a specific collection of Bricks.A Storage Domain is defined as:A subset of a virtual storage pool consisting of a defined group of Brick storage enclosures. This group can consist of any assortment of Bricks, regardless ofStorage Class, capacity, or any other attribute. A Storage Domain is typically used to provide specific allocation or security features for a collection of logicalvolumes.Reference: Pillar Axiom Administrator's Guide, About Storage Domains

QUESTION 50Which account will be used by the customer support team when working on the Axiom?


A. AdministratorB. PillarC. Primary AdministratorD. Pillar Support


Explanation/Reference:Explanation: Note: Contact the Oracle Pillar Customer Support for the encrypted file (for resetting the password). The Oracle Pillar Customer Support will send you the encryptedfile and give you instructions on how to install the file.

QUESTION 51Which dynamic status bar icon displays the overall system status of the hardware components?

A. System StatusB. System AlertC. Display Pillar Axiom system communicationsD. Hardware Status


Explanation/Reference:Explanation: Hardware statusDisplays the overall system status of the hardware components. A status of Normal (uncolored) requires no action. If, however, the status is Warning (yellow) orCritical (red), to view the Hardware overview page so the cause of the status can be identified, click this icon.Reference: Pillar Axiom Administrator's Guide, Status Bar Description

QUESTION 52Identify the Configure > Global Settings > Networking attribute that must be changed during the Axiom system setup.

A. Management InterfaceB. DNS Settings


C. NotificationD. iSCSI SecurityE. iSNS Settings


Explanation/Reference:Explanation: The management interface provides connectivity between the end user data network and the Pillar Axiom Pilot management controller. You can choose whichmethod to use to assign the primary IP addresses to the management interface on the Pilot:*Dynamic Host Configuration Protocol (DHCP), which assigns a primary IP address dynamically when the Pilot starts.*Static IP Address assigns a permanent, primary IP address to a control unit (CU) in the Pilot as well as alternate IP addresses for the ports on the partner CU. If themanagement software cannot access the primary IP address, it accesses an alternate IP address.Reference: Pillar Axiom Administrator's Guide, About the Network Interfaces


oracle.testinsides.1z0-581.v2016-12-13.by.melissa · 2016-12-13 · 1z0-581 passing score : 800...

Documents