-2016- - vel tech multi tech · 2017-10-31 · mr. m. logesh adithiyan.e 27 14.07.17 201741025010...
TRANSCRIPT
I am very proud and delighted to release the 3rd edition of the ‘’IGNITION-2016-2017’, the Newsletter of the Department of Mechanical
Engineering, which embraces the Achievements of the faculty members and the students. I am very happy to meet you through this page. Vel Tech Multi Tech has stood above the rest in its approach to education and in its pedagogies. The ways we teach and the ways our students learn are unique and creative. Education is not an act of acquiring knowledge but learning a skill to lead life and forming one’s personality. Many constructive efforts have been taken to improve our college results. As campus placements are progressing, efforts to groom the students to serve the society are also in pace. I can boldly say that the Department of Mechanical Engineering, has excelled in every initiative that has been undertaken and have stood together in facing the challenges in realizing quality education. I wish to record my hearty congratulations to those who have brought laurels to the institution and I appreciate all of you for working together as a team for the success of this Newsletter.
VISION OF THE DEPARTMENT
To become a centre of eminence in educating students to become
triumphant mechanical engineers.
MISSION OF THE DEPARTMENT
To endue the students with the fundamentals of mechanical engineering
with a passion for lifelong learning of industry practices.
To propagate lifelong learning.
To impart the right proportion of knowledge blended with attitudes and
ethics in students to enable them take up positions of responsibility in the
society and make significant contributions.
MEESAGE FROM THE PRINCIPAL’S DESK
Dr.V.Rajamani M.E., Ph.D Principal
The Department of Mechanical Engineering is a fledgling department started in
the institution during the year 2006.
This Department was started with an objective to impart high quality
education in Mechanical Engineering with the initial 60 and increased to 120
in the year 2008.
The department has state-of-art labs and qualified Faculty Members
(3Professors,9Associate Professors and 14Assistant Professors) with pas-
sion for both teaching and research.
Students are taught with the help of various teaching aids like smart
classrooms, LCD projector, NPTEL, Educational DVD’s , Video Conferenc-
ing, EDUSAT, Language Communication lab and knowledge Resource
centre.
Our Students have visited various industries like Ashok Leyland, WABCO,
TVS, TAFE, Hyundai Motors Company, Heavy Vehicles Factory, Addison
Tools Limed, etc.,
Our students have undergone Implant Training in various industries such as
India Piston, Ashok Leyland, Greaves Cotton Limited, Chennai Port Trust,
Tata Motors, Ford, Royal Enfield, etc.,
ABOUT THE DEPARTMENT
THERMAL LAB STRENGTH OF MATERIALS LAB
DEPARTMENT HIGHLIGHTS
AICTE-CII AWARD : The Department was honoured with PLATINUM
Award for the Best Department in Institute-Industry Interaction.
PERMANENT AFFILIATION : The Department is Permanently Affili-
ated to Anna University
RESEARCH GRANT : A grant of 39.76 Lakhs was received by
Dr.S.T.Selvamani from DST-SERB and a total of 51 Lakhs stands as
completed projects.
RESEARCH LAB : HYUNDAI Sponsored Research Laboratory Facility
is set up to inculcate the knowledge of the students beyond syllabus
catering to Industry Needs
PATENTS : 22 Patents are filed and 7 are Published
PUBLICATIONS : 70+ Publications in SCOPUS Indexed and 225 Publi-
cations in other referred journals.
PROFESSIONAL SOCIETY : Active Member of SAE and Active Partici-
pation in Professional Body Events
INNOVATION : Students have established themselves as strong Inno-
vators and won many awards participating across the nation.
HIGHER EDUCATION : Continuous Motivation from the Department
for students to pursue higher studies.
EMINENT PERSONALITIES DELIVERED LECTURES
Guest Lecture on ‘Recent Advancement In Manu-facturing Technology’ by Dr.Hariharan, HoD, Manufacturing Technology, Anna University,
Chennai.
Guest lecture on ‘Modern Combustion Strategies’ by Dr. D. Ganesh, Associate Professor, Anna University , Chennai.
Guest Lecture on ‘Strength of Materials’ by Dr.A.Arockiarajan, Indian Institute of
Technology Chennai.
Seminar on ‘Industrial Robots’ by Mr. Harish Reddy, Application Engineer,
Axis Global Automation Group of Companies.
MECHPRO FANFARE - 2017 A REMARKABLE DAY of the Department of Mechanical Engineering where 40 projects were exhibited in a single day, showcasing the Innovative and Talented minds of our students..
Students from Mechanical won 1st Prize and was also awarded Rs.5000 in the event ”IDEA SHOWCASE,E-CONCLAVE-17” for the project “Automatic Open Drainage path cleaner” - a project expo organized by Rajalakshmi Engineering college.
Electric Solar Vehicle Championship 2017
SUPRA- SAE INDIA
SCOPUS PUBLICATION
S.No Authors Title Source title Volume, Issue
No & Page No
1 Selvamani S.T., Vigneshwar M., Divagar S.
Establishing the Relationship Be-tween Fatigue and Tensile Strength of Frictionally Joined Metal Matrix Nanocomposite Autogeneous Joints for Aerospace
Transactions of the Indian Institute of Metals
Vol-69;Issue no-2;Page No:431-437
2 Palani S., Suresh K., Thanesh A., Muthukumar S., Parthasarathy V.
Design and development of billet sawing machine for improving productivity
Indian Journal of Science and Technology
Vol-9;Issue no-1;Page No:-
3 Alagu Sundara Pandian A., Irudhayaraj R., Suresh K., Johnstephen R., Palani S.
Design and development of industrial receiver gauge in coordinate measur-ing machine for reducing inspection time
International Journal of Control Theory and Appli-cations
Vol-9;Issue no-9;Page No:3783-3796
4
Alagu Sundara P., Palani S., Paul Lingaprakash R., Selvam M., Parthasarathy V.
Design and development of gear measuring machine by means of in-troducing special attachment for re-ducing takt time
Indian Journal of Science and Technology
Vol-9;Issue no-1;Page No:-
5 Palani S., Irudhayaraj R., Alagu Sundara Pandian A., Selvam M., Shanmugan S.
Dry sliding wear behaviour of alu-minium alloy 6061-redmud metal matrix composites by stir casting method
International Journal of Control Theory and Appli-cations
Vol-9;Issue no-9;Page No:3797-
3803
6 Vigneshwar M., Divagar S., Selvamani S.T.
Mechanical and Metallurgical Behav-ior of Friction welded Dual Nano Par-ticles Reinforced Armour Grade Al based Nanocomposite joints in opti-mized Condition
Materials Today: Proceed-ings
Vol-3;Issue no-10;Page No:3740-3745
7 Selvamani S.T., Vigneshwar M., Divagar S.
Effects of heat transfer on microhard-ness and microstructure of friction stir welded AA 6061 Aluminum alloy
International Journal of Engineering Research in Africa
Vol-21;Issue no-;Page No:102-109
8 Divagar S., Vigneshwar M., Selvamani S.T.
Impacts of Nano Particles on Fatigue Strength of Aluminum Based Metal Matrix Composites for Aerospace
Materials Today: Proceed-ings
Vol-3;Issue no-10;Page No:3734-3739
9 Ganapathy Srinivasan R., Shanmugan S., Palani S.
Application of magnetorheological fluid in machining process
International Journal of Control Theory and Appli-cations
Vol-9;Issue no-9;Page No:3705-3712
10 Selvam M., Vigneshwaran R., Irudhayaraj R., Palani S., Parthasarathy V.
Emission control diesel power plant for reducing oxides of nitrogen through selective catalytic reduction method using ammonia
Indian Journal of Science and Technology
Vol-9;Issue no-1;Page No:-
11
Palani S., Suresh K., Selvam M., Ganapathy Srinivasan R., Shanmugan S.
Setting time reduction in drum brake assembly for improving productivity
International Journal of Control Theory and Appli-cations
Vol-9;Issue no-9;Page No:4009-4016
S.No Authors Title Source title Volume, Issue
No & Page No
12 John Stephen R., Stephen J., Palani S., Selvam M.
Condition monitoring and numeri-cal simulation of subsonic jets us-ing thermograph analysis
International Journal of Control Theory and Appli-cations
Vol-9;Issue no-9;Page No:3743-3750
13 Muthukumar S., Mariappan R.
Microstructure characterization of aa6061 alloy/silicon carbide /fly ash hybrid metal matrix composite produced by powder metallurgy route
ARPN Journal of Engineer-ing and Applied Sciences
Vol-11;Issue no-24;Page No:14545-14551
14 Thamaraiselvan A., Thanesh A., Suresh K., Palani S., Ha-rish K.A.
Design and development of reliable integral shaft bearing for water pump in automotive engine to re-duce assemble time and increase production
Indian Journal of Science and Technology
Vol-9;Issue no-1;Page No:-
15
Paul Linga Prakash R., Selvam M., Alagu Sundara Pandian A., Palani S., Harish K.A.
Design and modification of radiator in I.C. engine cooling system for maximizing efficiency and life
Indian Journal of Science and Technology
Vol-9;Issue no-2;Page No:-
16 Dilip R.N., Velu R., Selvamani S.T.
Developing an Empirical Relation-ship to Predict the Maximum Ten-sile Strength on Friction Stir Weld-ed Al Based Metal Matrix Compo-site Joints Produced by Stir Casting Method
Journal of Chemical and Pharmaceutical Sciences
Vol-9;Issue no-3;Page No:1710-1713
17 Palani S., Irudhayaraj R., Vigneshwaran R., Selvam M., Harish K.A.
Study of cooling system in I.C. en-gine improving performance with reduction of cost
Indian Journal of Science and Technology
Vol-9;Issue no-1;Page No:-
18 Sathyamurthy R., Nagarajan P.K., Vijayakumar D.
Experimental validation of fresh water production using triangular pyramid solar still with PCM stor-age
International Journal of Engineering Research in Africa
Vol-20;Issue no-;Page No:51-58
19 Ohmanth B., Kathiravan R., Gandikota S.
The effect of chemical treatment on mechanical and thermal properties of abaca-glass-banana hybrid fibre composites
International Journal of ChemTech Research
Vol-9;Issue no-3;Page No:665-671
20 Pandian A.S., Koushik G.S. Design and simulation of heat ex-changer fitted with Cu porous me-dia and ridges
International Journal of ChemTech Research
Vol-9;Issue no-1;Page No:15-22
SCOPUS PUBLICATION
PATENTS FILED IN 2016-17
S.NO DATE APPLICATION DEPT TITLE STUDENT INTERNAL
21 19.05.17 201741017676 MECH Design And Fabrication Of Pedal Operated Wet Grinder Cum Stationary Exercise Kit
Venkatesh.C
Mr. K.A.Harish Santhosh.R.P
Darapaneni Vi-
22 19.05.17 201741017675 MECH Multi Purpose Floor Cleaning Machining Process Simulta-neously
Satheesh M
Mr.M.Selvam Raghavi.S
Nandhini.G
Kalirajan.K
23 19.05.17 201741017586 MECH Automatic Burr Cleaning Ma-chine
Karthik R
Mr.A.Thamarai Sel-van Vishnu R
Raagav R
24 19.05.17 201741017587 MECH Open Drainage Path Cleaner
Ranjith.T
Mr. Paul Linga Pra-kash
Vishnu Kumar.B
Praveen Ku-
25 19.05.17 201741017588 MECH Oil Spill Remover
Maheswaran R
Mr.A.Thanesh Shijo J Selva
Raghuram V
26 19.05.17 201741017589 MECH Power Generation Using Compressed Air
Manoj.N
Mr. M. Logesh Adithiyan.E
27 14.07.17 201741025010 MECH Modern Idle Air Regulator
Berrin daniel Y Dr V Valasam-udram Adhithiyan V
Sabareesh K
28 14.07.17 201741025022 MECH Variable Damping Suspen-sion Using Centrifugal Gover-nor
J. Dilli Babu
Mr.A.Alagu Sundara Pandian B. Subhavishal
S. Sathya Nara-
29 14.07.17 201741025053 MECH Design and Fabrication of Spike key Lock
M. Meikandan
Mr. A.Thanesh M. G. Sathya Na-
D. Yukesh Raj
30 14.07.17 201741025021 MECH Automatic Bus Stair
P. Nareshkumar
Mr.R.Iruthayaraj T. Karkuvel Raj
B. Vinoth
M. Gopi
14.07.17 201741025051 MECH Design and Fabrication of Automative Rain Wiper Us-ing Solar Energy
Pravesh Kumar
Mr.R.Ganapathy Srinivasan
31 L.Sankara nara-
A. Swamina-
S.NO DATE APPLICATION DEPT TITLE STUDENT NAME INTERNAL
32 14.07.17 201741025054 MECH Magnetic Levitation Princi-ple Based Turbo Charger
Ajith Kumar .R
Mr.S.Muthu Kumar Ramki .S
Shiva Kumar .S
33 14.07.17 201741025011 MECH Solar Powered Heavy Duty Power Hackshaw Machine
Arunprakash R.S
Dr.S.Palani Purusothaman K
Prakash K
34 14.07.17 201741025029 MECH Design and Fabrication of Regenmerative Braking System in Bicycle System
Prashant Tiwari
Dr V Valasamudram M. D. Saludeen
Bharath Arora
35 14.07.17 201741025030 MECH
Highway Power Generation Using Vertical Windmill
M Praveen
Mr.M.Logesh N Praveen Raj
M Vikranth
36 14.07.17 201741025052 MECH Three Axis Pneumatic Trailer
Vijay T
Mr R.Ganapathy Srinivasan
Saran R
Sathishkumar T
PATENTS FILED IN 2016-17
RESEARCH GRANT—DST SERB Dr.Selvamani (MECH) has received Research
Project Grant of Rs.39.76 Lakhs from DST SERB
Dr.S.Palani was Awarded with
Distinguished Scientist Award
FACULTY ACHIEVEMENTS
GUEST LECTURES/SEMINARS/WORKSHOPS
SNO DATE NAME OF THE TOPIC RESOURCE
PERSON NAME DESIGNATION, PLACE
1 30.07.16 Advanced Manufacturing Dr.Hariharan, Head, Manufactur-
ing Technology, CEG, AU.
2 20.08.16 Latest Improvement in Tank Technology
Dr.Hafizur Rahman
Scientist, CVRDE.
3 10.02.17 Modern Combustion Strategies
Dr.D.Ganesh Associate Professor , AU
4 18.07.16 Significance of Industrial Robots in manufacturing industries
Mr.Harish Reddy
Application Engi-neer
Axis Global Automa-tion Group of Com-
panies.
5 29.12.16 ICTACT Autodesk Com-petition for MECH stu-dents
Mr.Vishnu Prasad
Co Coordinator Mr. Shereef – Sen-
ior Trainer ICT Academy , Chen-
nai
6 16.07.16 ICTACT Autodesk Fusion 360 Workshop.
Mr.Mohamed
Sharif
Senior Executive
Trainer, Auto Desk.
7 27.07.16 3D Modelling & Analysis using creo 2.0
Mr.Sudhkar Director, CADD
CAMM Solutions.
8 24.12.16 Workshop on Hades Racing
Mr.Naveen Mentor SAE SUPRA
9 26.12.16
AICTE PMKVY - Skill development program (MECH) inauguration function.
Internal Coordinators
VTMT
NCMDMS'17 National Conference on Modernization, Dynamisation
Mechanisation & Structuralisation
RESOURCE PERSON Mr.Senthilkumar , Manager – HR, Netafim (an Israel based MNC)
Dr. T.S. Thandavamoorthy , Rtd. Deputy director , SERC-Chennai.
MECH PRO FANFARE 2017 PROJECT EXPO - FIRST OF ITS KIND– ALL YOUNG TALENTED MINDS
SNO DATE NAME OF THE STUDENT DEGREE UNIVERSITY & PLACE
1 04.08.16 Mr Shibin P S M.S in Mechanical
Engineering Cleveland State
University, USA ;
2 10.08.16 Mr Raghunath Harnath
M.S in Industrial Engineering
Wayne State University, USA.
3 18.07.17 Mr. Madhan Prakash MS (Transport &
Logistics) Technical University of
Munich, Singapore
4 12.08.17 Mr. Vijay Viknesh MS (Mechanical
Engineering) Linkoping University,
Sweden
5 12.08.17 Mr. Hariharan MS (Mechanical
Engineering) Linkoping University,
Sweden
BONVOYAGE
INDUSTRIAL VISITS
SNO DATE SEMESTER COMPANY FACULTY ASSOCIATED
1
22.07.16,
26.07.16 &
29.07.16
V Sem ( Batch I,II & III ) ICF, Perambur.
Batch I 1. MTS1391 / Mr.R.Vigneshwaran 2. MTS1514 / Mr.R.Iruthayaraj 3. MTS1401 / Mr.M.Logesh 4. MTS1658 / Ms.Tamilselvi Batch II 1.MTS1435 / Mr.A.Thamaraiselvan 2.MTS679 / Mr.D.Vijayakuamr Batch III MTS738 / Muthukumar MTS1401 / Mr.M.Logesh
2 09.03 &
10.03.17
III Sem ( Batch I, Batch II)
Ashok Leyland,
Ennore
1. MTS1401/M.Logesh 2. MTS1279/Paul linga prakash 3. MTS679/D.Vijayakumar 4. MTS1245/Alagusundara pandiyan
LIST OF INDUSTRIAL VISITS /INPLANT TRAINING/INTERNSHIPS ATTENDED BY STUDENTS
ASHOK LEYLAND, HOSUR
CVRDE
HINDUSTAN MOTORS
1. ENGINE FACTORY 2. ASHOK LEYLAND 3. ALFANAR 4. INTEGRAL COACH FACTORY 5. HCL 6. HVF 7. IBEX PRODUCT LTD
8. Hinduja Foundries
9. SVS Precision Tools
10.UNIQ Technologies
11.Southern Railway
12.Johnson Controls
13.Chennai Port Trust
14.ROYAL ENFIELD
15.Hindustan Shipyard Ltd
16.NSIC
17.CADD Global Technologies
18.Amalgamations Repco Ltd
19.AmaraRaja
20.TI INDIA
21.GREAVES COTTON LIMITED
22.Johnson Controls
AICTE PMKVY SKILL DEVELOPMENT PROGRAM