2019 dodge durango quick reference guide · 2018. 12. 12. · 20 mph (32 km/h). to activate push...

2019 DURANGO QUICK REFERENCE GUIDE

Vehicle User Guide — If EquippedTo access the Vehicle User Guide on yourUconnect Touchscreen: Tap the Uconnect Appsbutton, then tap the Vehicle User Guide icon onyour touchscreen. No Uconnect registration isrequired.

NOTE:Vehicle User Guide features are not availablewhile the vehicle is moving.

Features

• Your User Guide — Updated in real-time

• Available when and where you need it

• Touchscreen convenience

• Customizable interface

• Maintenance schedules and information

• Multilingual

• Comprehensive icon & symbol glossary

Key Fob Battery Low

In case the ignition state does not change with thepush of a button, the key fob may have a low ordead battery. In this situation, a backup methodcan be used to activate the ignition. Put the noseside (side opposite of the emergency key) of thekey fob against the ignition START/STOP buttonand push to operate the ignition.

Uconnect 4C NAV With 8.4–inch DisplayVehicle User Guide Touchscreen Icon

Low Or Dead Key Fob Battery StartingProcedure

V E H I C L E U S E R G U I D E — I FE Q U I P P E D

K E Y F O B

NOTE:The ignition START/STOP button is fixed directlyto the instrument panel and cannot be removedfor alternate methods of starting.

For further information, and applicable warningsand cautions, please refer to the Owner’s Manualat www.mopar.com/en-us/care/owners-manual.html(U.S. Residents) or www.owners.mopar.ca (Cana-dian Residents).

Keyless Enter-N-Go — PassiveEntryThe Keyless Enter-N-Go system is an enhance-ment to the vehicle’s key fob. This feature allowsyou to lock and unlock the vehicle’s door(s) andliftgate without having to press the key fob lock orunlock buttons.

To Unlock Using The Driver’s OrPassenger’s Front Door Handle

With a valid Keyless Enter-N-Go Key Fob locatedoutside the vehicle and within 5 ft (1.5 m) of thedriver or passenger side door handle, grab eitherfront door handle to unlock the door automatically.

Grab The Door Handle To Unlock

P A S S I V E E N T R Y

https://www.mopar.com/en-us/care/owners-manual.htmlhttp://owners.mopar.ca/

To Lock Using The Driver’s OrPassenger’s Front Door Handle• Both front door handles have buttons located

on the outside of the handle. With one of thevehicle's Keyless Enter-N-Go key fobs locatedoutside the vehicle and within 5 ft (1.5 m) ofthe driver's or passenger front door handle,push the door handle button to lock all fourdoors and liftgate.

• DO NOT grab the door handle when pushingthe door handle lock button. This could unlockthe door(s).

• After pushing the door handle lock button, youmust wait two seconds before you can lock orunlock the vehicle. This will allow you to pull onthe vehicle’s door handle to verify that thevehicle is locked.


Do NOT Grab Handle When Locking Push The Door Handle Button To Lock


Autostick Paddle Shifters

When the gear selector is in the DRIVE position,the transmission will operate automatically, shift-ing between the eight available gears.

To engage AutoStick, tap one of the steeringwheel-mounted AutoStick Paddle Shifters (+/–).

Tapping (–) to enter AutoStick will downshift thetransmission to the next lower gear while using (+)to enter AutoStick will retain the current gear.When AutoStick is active, the current transmis-sion gear is displayed in the instrument cluster.

In AutoStick, the transmission will shift up ordown when (+/–) is selected by the driver (usingthe shift paddles) unless an engine lugging oroverspeed condition would result. It will remain inthe selected gear until another upshift or down-shift is chosen, except as described below:

• In AutoStick, the transmission will remain inthe selected gear even when maximum enginespeed is reached. The transmission will upshiftonly when commanded by the driver.

• The transmission will automatically downshiftas the vehicle slows (to prevent engine lugging)and will display the current gear.

• The transmission will automatically downshiftto first gear when coming to a stop. After a stop,the driver should upshift (+) the transmissionas the vehicle is accelerated.

• You can start out in first or second gear. Tap-ping (+) (at a stop) will allow starting in secondgear. Starting out in second gear is helpful insnowy or icy conditions.

• The system will ignore an attempt to upshift attoo low of a vehicle speed.

• Transmission shifting will be more noticeablewhen paddle shift mode is engaged.

• To disengage Autostick, press and hold the (+)shift paddle until “D” is once again displayedin the instrument cluster. You can shift in or outof the paddle shift mode at any time withouttaking your foot off the accelerator pedal.

Disabling Autostick Paddle Shifters

The shift paddles may be disabled (or re-enabled,as desired) using the Uconnect Personal Settings.


AutoStick Shift Paddles

S T A R T I N G A N D O P E R AT I N G


Eco Mode

The Fuel Economy (ECO) mode can improve thevehicle’s overall fuel economy during normal driv-ing conditions.

Press the “ECO” switch in the center stack of theinstrument panel to turn the system off. An amberlight on the switch will indicate that ECO mode isdisengaged. Press the “ECO” switch in the centerstack of the instrument panel a second time toturn ECO mode back on

When the Fuel Economy (ECO) mode is engaged,the vehicle control systems will be able to changethe following:

• The transmission will upshift sooner and down-shift later.

• For vehicles equipped with the 5.7L Hemi,4 cylinder mode will be enabled under certainconditions.

• The overall driving performance will be moreconservative.

Engine Stop/Start System (ESS) —If Equipped

The STOP/START system was developed to reduceemissions and will stop the engine automaticallyduring a vehicle stop if the required conditions aremet.

Releasing the brake pedal or pressing the accel-erator pedal will re-start the engine.

How do I manually turn off/on the ENGINESTOP/START system?

• Press the STOP/START OFF switch (located onthe switch bank). The light on the switch willilluminate when the system is off. The light onthe switch will turn off when system is on. What are possible reasons the engine does not

autostop?

• The hood is ajar.

• Driver’s door is open.

• Driver’s seat belt is unbuckled.

• Cabin heating or cooling is in process and anacceptable cabin temperature has not beenachieved.

STOP/START Off Switch

• The transmission is not in a forward gear.

• The vehicle has not reached a speed of 5 mph(8 km/h) after the previous autostop.

• Many of these reasons are displayed as aSTOP/START message in the cluster displaywithin the STOP/START section. The systemmust be in the “STOP/ START READY” state toautostop. To access the STOP/START section ofthe cluster display, use the display controls.Refer to the “Starting and Operating” sectionof your Owner’s Manual for a complete list ofpossible events in which the engine does notautostop.

How do I know I am in an autostop?

• The engine will shut down, the tachometer willmove to the zero position and the STOP/STARTtelltale will illuminate in the instrument cluster.

How do I start the engine while in an autostop?

• While in a forward gear, the engine will startwhen the brake pedal is released or the throttlepedal is depressed. The transmission will auto-matically re-engage upon engine restart.

NOTE:The system will automatically revert to ON at everyignition cycle.

Sport Mode

Your vehicle is equipped with a Sport Mode fea-ture. This mode is a configuration set up forenthusiast driving. The engine, transmission, andsteering systems are all set to their SPORT set-tings. Sport Mode will provide improved throttleresponse and modified shifting for an enhanceddriving experience, as well the greatest amount ofsteering feel. This mode may be activated anddeactivated by pushing the Sport button on theinstrument panel switch bank.

Electric Power Steering (EPS)The electric power steering system will give yougood vehicle response and increased ease of ma-neuverability in tight spaces. The system will varyits assistance to provide light efforts while parkingand good feel while driving. If the electric steeringsystem experiences a fault that prevents it fromproviding assistance, you will still have the abilityto steer the vehicle manually.

Alternate electric power steering efforts can beselected through the Uconnect System.



Speed Control

When engaged, the Speed Control takes overaccelerator operations at speeds greater than20 mph (32 km/h).

To Activate

Push the on/off button. To turn the system off,push the on/off button a second time. The systemshould be turned off when not in use.

To Set A Desired Speed

Turn the Speed Control on. When the vehicle hasreached the desired speed, push the SET (+) orSET (-) button and release. Release the accelera-tor and the vehicle will operate at the selectedspeed.

To Deactivate

A soft tap on the brake pedal, pushing the CANCbutton, or normal brake pressure while slowing thevehicle will deactivate Speed Control without eras-ing the set speed memory. Pushing the on/offbutton or turning the ignition switch OFF erasesthe set speed in memory.

To Resume Speed

To resume a previously set speed, push the RESbutton and release.

To Increase Speed

When the Speed Control is set, you can increasespeed by pushing the SET (+) button.

To Decrease Speed

When the Speed Control is set, you can decreasespeed by pushing the SET (-) button.

To Accelerate For Passing

Press the accelerator as you would normally. Whenthe pedal is released, the vehicle will return to theset speed.


Speed Control Switches

1 — CANC/Cancel2 — SET (+)/Accel3 — RES/Resume4 — On/Off5 — SET (-)/Decel

S P E E D C O N T R O L


Adaptive Cruise Control (ACC) —If Equipped

If your vehicle is equipped with Adaptive CruiseControl, the controls operate exactly the same asthe standard cruise control, with one difference.You can set a specified distance you would like tomaintain between you and the vehicle in front ofyou.

• If the ACC sensor detects a vehicle ahead, ACCwill apply limited braking or acceleration auto-matically to maintain a preset following dis-tance while matching the speed of the vehicleahead.

NOTE:Your vehicle will not exceed the cruise speed youhave set.

• If the sensor does not detect a vehicle directlyahead of you, it functions like a standard cruisecontrol system, maintaining the speed you set.


Adaptive Cruise Switches

1 — Adaptive Cruise Control (ACC)On/Off2 — Distance Setting – Decrease3 — Distance Setting – Increase


Forward Collision Warning WithMitigation — If Equipped

The Forward Collision Warning (FCW) system canprovide the driver with active braking, audible andvisual warnings (within the instrument cluster dis-play) and may apply a brake jerk to warn the driverwhen it detects a potential frontal collision. Thewarnings and limited braking are intended to pro-vide the driver with enough time to react and avoidor mitigate the potential collision.

The system status can be selected to: “Off”, “OnlyWarning”, and “Warning & Braking”. “Warning &Braking” status with “Medium” sensitivity are thedefault settings, but can be changed within theUconnect settings under “Safety and Driving As-sistance”.

FCW monitors the information from the forward-looking sensor, as well as the Electronic BrakeController (EBC) and wheel speed sensors, to calcu-late the probability of a collision. When the systemdetermines that a collision is probable, a warningmessage (both audible and visual) will be displayed

within the cluster display along with a brake jerkwarning (previously enabled in the Uconnect Set-tings). When the system senses the driver applyingthe brakes to avoid a probable collision, additionalbrake force will be provided to the vehicle. When thesystem determines a collision with the vehicle infront of you is no longer probable, the warningmessage will be deactivated.

NOTE:The FCW feature can be customized and turnedoff through the Uconnect System touchscreen.


LaneSense — If EquippedThe LaneSense system is operational at speedsabove 37 mph (60 km/h) and below 112 mph(180 km/h). The LaneSense system uses a forwardlooking camera to detect lane markings and measurevehicle position within the lane boundaries.

Turning LaneSense On Or Off

The default status of LaneSense is “off”. TheLaneSense button is located on the center stack.

LaneSense Warning Message

The LaneSense system will indicate the currentlane drift condition through the instrument clusterdisplay. The instrument cluster display will pro-vide a visual warning depicting the unintentionallane departure.

When both lane markings are detected and thedriver unintentionally drifts out of the lane (no turnsignal applied), the LaneSense system provides ahaptic warning in the form of torque applied to thesteering wheel to prompt the driver to remainwithin the lane boundaries. The driver may manu-ally override the haptic warning by applying torqueinto the steering wheel at any time. When only asingle lane marking is detected and the driverunintentionally drifts across the lane marking (noturn signal applied), the LaneSense system pro-vides a visual warning through the instrument

S A F E T Y F E AT U R E S


cluster display to prompt the driver to remainwithin the lane. When only a single lane marking isdetected, a haptic (torque) warning will not beprovided.

NOTE:The LaneSense system can be customized andturned off through the Uconnect System touch-screen.


ParkSense Rear Or ParkSenseFront And Rear Park Assist —If Equipped• The four ParkSense sensors, located in the rear

fascia/bumper, monitor the area behind thevehicle that is within the sensor’s field of view.

• The six ParkSense sensors, located in the frontfascia/bumper, monitor the area in front of thevehicle that is within the sensors’ field of view.

• The rear sensors can detect obstacles fromapproximately 12 inches (30 cm) up to79 inches (200 cm) from the rear bumperwhile the vehicle is in REVERSE, while thefront sensors can detect obstacles from ap-proximately 12 inches (30 cm) up to 47 inches(120 cm) from the front fascia/bumper in the

horizontal direction, depending on the loca-tion, type and orientation of the obstacle. Whenan obstacle is detected, a warning will displayin the instrument cluster and a chime willsound (when Sound and Display is selectedfrom the Customer Programmable Featuressection of the Uconnect System screen). As thevehicle moves closer to the object, the chimerate will change from single 1/2 second tone, toslow, to fast, to continuous.

• If the system detects a potential impact with anobject, the vehicle brakes may be applied.


P A R K S E N S E

https://www.mopar.com/en-us/care/owners-manual.htmlhttp://owners.mopar.ca/https://www.mopar.com/en-us/care/owners-manual.htmlhttp://owners.mopar.ca/

Rear Back-Up CameraThe ParkView Rear Back-Up Camera allows you tosee an on-screen image of the rear surroundings ofyour vehicle whenever the gear selector is put intoREVERSE. The ParkView Rear Back-Up Cameraimage will be displayed on the Uconnect Display,located on the center stack of the instrumentpanel. The ParkView Rear Back-Up Camera islocated on the rear of the vehicle above the rearlicense plate.

Rear Camera — Viewing At Speed

When the vehicle is in PARK, NEUTRAL or DRIVE,the Rear View Camera can be activated with the“Rear View Camera” button in the Controls menu.This feature allows the customer to monitor thearea directly behind the vehicle for up to tenseconds while at speed. If the vehicle speed re-mains below 8 mph (13 km/h), the Rear ViewCamera image will be displayed continuously untildeactivated via the “X” button on the touch-screen.


Memory SeatsThe memory seat feature allows you to set twodifferent driver’s seating positions (excluding lum-bar position), outside mirrors, radio station presetsettings and tilt/telescoping steering column posi-tions (if equipped). The memory seat buttons arelocated on the driver’s door panel.

Memory Seat Buttons

P A R K V I E W S E AT S


To Set A Memory Position:

1. Cycle the vehicle’s ignition to the ON/RUNposition (Do not start the engine).

2. Adjust all memory profile settings.

3. Push and release the S (set) button.

4. Push and release the 1 or 2 button within fiveseconds.

To Program A Key Fob To The Memory Position:

1. Cycle the vehicle’s ignition to the OFF position.

2. Select the desired memory profile, 1 or 2.

3. Push and release the S (set) button on thememory switch, then within five seconds,press and release the 1 or 2 button accord-ingly.

4. Push and release the lock button on the key fobwithin 10 seconds.

NOTE:Memory seats can be programmed/stored whilethe engine is running.


Wiper/Washer ControlsThe multifunction lever is located on the left sideof the steering column.

Front Wiper Operation

The front wipers are operated by rotating a switch,located on the end of the lever.

Multifunction Lever

W I N D S H I E L DW I P E R / WA S H E R F E AT U R E S


Rear Wiper Operation

The rear wiper/washer is operated by rotating aswitch, located on the middle of the lever.

Rain Sensing Wipers

This feature senses moisture on the windshieldand automatically activates the wipers for thedriver. The feature is especially useful for roadsplash or overspray from the windshield washersof the vehicle ahead. Rotate the end of the multi-function lever to one of four settings to activatethis feature.


Automatic High Beam — IfEquippedThis system automatically controls the operationof the headlamp high beams as oncoming vehiclesapproach.

• The Automatic High Beam Headlamp Controlcan be turned on or off using the UconnectSystem.

• Push the turn signal lever away from you.

• With the headlight switch in the “AUTO” posi-tion, the high beams are controlled auto-matically.

• Pull the turn signal lever toward you to manu-ally deactivate the system.

• To improve system recognition of crossing traf-fic, and to limit use in a residential area, thevehicle must be moving at a speed greater than20 mph (32 km/h) before the Automatic HighBeam Module (AHBM) begins requesting highbeam activation.

NOTE:If the windshield or Automatic High Beam Head-lamp Control mirror is replaced, the mirror mustbe re-aimed to ensure proper performance. See anlocal authorized dealer.


L I G H T S

https://www.mopar.com/en-us/care/owners-manual.htmlhttp://owners.mopar.ca/https://www.mopar.com/en-us/care/owners-manual.htmlhttp://owners.mopar.ca/

Instrument Cluster Display Select-able Menu ItemsThe instrument cluster features a driver interac-tive display that is located in the of the center ofthe instrument cluster. Pushing the controls onthe left side of the steering wheel allows the driverto select vehicle information and Personal Set-tings. Push the up or down arrow buttons to scrollthrough the main menu feature items. To enter thesubmenu’s of a feature menu item push the left orright arrow buttons then push the OK button toselect or reset the submenu feature items:

Speedometer Vehicle Info Driver AssistFuelEconomy

Trip Stop/Start

Audio StoredMessages

Screen Setup

Performance— IfEquipped

Diagnostics— IfEquipped

Speed Warning —If Equipped


SRT Drive ModesYour SRT vehicle is equipped with a Drive Modesfeature which allows for coordinating the opera-tion of various vehicle systems depending uponthe type of driving behavior desired. The DriveModes feature is controlled through the touch-screen and may be accessed by performing any ofthe following:

• Selecting “Drive Modes” from the “Apps”menu.

• Selecting “Drive Modes” from within the Per-formance Pages menu.

The SRT Drive Modes main screen displays thecurrent drive mode and real-time status of thevehicle’s performance configuration. The select-able Drive Modes are Track, Sport, Auto, Snow,Tow or Custom. Information shown will indicatethe actual status of each system, along with avehicle graphic that displays the active drive modestatus. The color red indicates “Track,” orange“Sport,” yellow “Street,” purple “Tow” and bluefor “Snow.” These features will reset to AUTO

I N S T R U M E N T C L U S T E RD I S P L AY

S R T D R I V E M O D E S — I FE Q U I P P E D


upon an ignition cycle. If the system status showndoes not match the current drive mode set up, amessage will be displayed indicating which valuesare not matching the current mode.

Listed below are the available Drive Modes:

• Track Mode: Selecting “Track” on the touch-screen will activate the configuration for typicaltrack driving. The Transmission, Stability Con-trol, All-Wheel Drive, Steering, and Suspensionsystems are all set to their “Track” settingshighlighted in red. The Paddle Shifters areenabled.

• Sport Mode: Selecting “Sport” on the touch-screen will activate the configuration for typicalenthusiast driving. The Transmission, StabilityControl, All-Wheel Drive, Steering, and Sus-pension systems are all set to their “Sport”settings highlighted in orange. The PaddleShifters are enabled.

• Tow Mode: Selecting “Tow” on the touchscreenwill activate the configuration for towing atrailer or hauling heavy loads in the cargo area.Once in this mode, trailer sway control is en-abled in the ESC system. The Transmission is

set to “Tow” setting highlighted in purple. Sta-bility Control is set to “Full” highlighted inblue. All-Wheel Drive is set to “50/50” high-lighted in blue. Steering is set to “Sport” high-lighted in yellow. Suspension is set to “Sport”highlighted in orange. Paddle Shifters areenabled.

• Snow Mode: Selecting “Snow” on the touch-screen will activate snow mode for use on loosetraction surfaces. When in Snow mode (de-pending on certain operating conditions), thetransmission will use second gear (rather thanfirst gear) during launches, to minimize wheelslippage. The Transmission is set to “Snow”setting highlighted in blue. Stability Control isset to “Full” highlighted in blue. All-WheelDrive is set to “50/50” highlighted in blue.Steering is set to “Street” highlighted in yellow.Suspension is set to “Street” highlighted inyellow.

• Auto Mode: Auto mode is enabled upon ignitionon, or by selecting “Auto” on the touchscreen.The Transmission, Stability Control and All-Wheel Drive modes are set to their “Street”settings highlighted in yellow. Steering and

Suspension can be configured in either the“Street,” “Sport,” or “Track” and the PaddleShifters may be enabled or disabled while inauto set-up mode.

• Custom Mode: Custom Mode may be selectedby pushing the “Custom” button on the touch-screen. Custom Mode allows you to create acustom configuration that is saved for quickselection of your favorite settings. While inCustom Mode, the All-Wheel Drive, StabilityControl, Transmission, Steering, and Suspen-sion, settings are shown in their current con-figuration. While in the Custom Mode screen,press the “Custom Set-Up” button on thetouchscreen to access the selectable options.Select which mode suits your driving needs fora custom driving experience.

For further information refer to your SRT DriveMode Supplement.

Activation

Activate your account to enjoy advanced safety,security and convenience features.

1. Press the Apps icon on the bottom of yourin-vehicle touchscreen.

2. Select the “Activate Services” icon from yourlist of apps.

3. Select “Customer Care” to speak with aSiriusXM Guardian Customer Care agent whowill activate services in your vehicle, or select“Enter Email” to activate on the web.

Once you have activated your services, you’re onlya few steps away from using remote services.

Download the Uconnect mobile app:

• Once downloaded, use your Owner Accountlogin and password to access the app.

• A PIN is required to execute remote services.

• Tap the “Location” button on the bottom menubar of the app to locate your vehicle or send adestination to your Uconnect Navigation (ifequipped).

• Tap the “Settings” side menu in the upper leftcorner of the app to bring up app settings andaccess the Assist Call Centers.

For further information:

• U.S. residents visit: siriusxm.com/guardian

• Canadian residents visit: siriusxm.ca/guardian/

Mobile App

S I R I U S X M G U A R D I A N — I FE Q U I P P E D

https://www.siriusxm.com/guardianhttps://www.siriusxm.ca/guardian/

FeaturesIn-Vehicle

SiriusXM Guardian enhances your ownership anddriving experience by connecting your vehicle toan operable network. When connected to an oper-able network, you have access to:

• SOS Call: Connect to a live agent who willcontacts emergency services and stay on theline with you until help arrives.

• Customer Care Assistance: Speak with a liveagent by pressing the ASSIST button on yourrearview mirror to get Roadside Assistance orsupport.

Remote Services

• Vehicle Finder helps you find where you parkedyour car.

• Send & Go allows you to send destinations to yournavigation system for easy access on the go.

• Remote Door Lock/Unlock lets you unlock orlock your doors from any distance.

• Remote Horn & Lights allows you to sound yourhorn and flash your lights to easily find your car.

• Receive monthly Vehicle Health Reports, andAlerts whenever a problem is detected underthe hood.

Security Services

• Receive text or email notifications if your vehi-cle's security alarm goes off.

• Receive stolen vehicle assistance, using GPStechnology to help authorities locate your ve-hicle if it is stolen.

SiriusXM Guardian remote services can be usedwith the Uconnect app from virtually anywhere.

For further information on SiriusXM Guardian orthe Uconnect mobile App, refer to your UconnectOwner’s Manual Supplement.

Vehicle Finder And Send & GoVehicle Finder

Vehicle Finder allows you to find the location ofyour vehicle. To find your vehicle:

1. Press the “Location” tab on the Uconnectmobile App bottom bar.

2. Select the “Vehicle” icon to determine thelocation of your vehicle.

3. Select the “Find Route” button that appears,once your vehicle is located.

4. Select your preferred Navigation app to route apath to your vehicle.

Send & Go

To send an address to your Uconnect Navigationusing the Uconnect mobile app:

1. Press the “Location” tab on the bottom bar ofthe Uconnect mobile app.

2. Type in the destination you would like to navi-gate to, or search through one of the categoriesprovided.

3. Select the destination you want to send fromthe list that appears.

4. Press the “Send To Vehicle” button, and thenconfirm the destination by pressing “Yes,” tosend the destination to the Uconnect Naviga-tion in your vehicle.

5. Finally, confirm the destination inside yourvehicle by pressing the “Go Now” option on thepop-up that appears on the touchscreen whenthe vehicle is started.

Amazon Alexa Integration

Alexa is Amazon’s cloud-based voice service and itlets you voice-command your Uconnect systemfrom just about anywhere you Alexa.

To link your Uconnect system to Amazon Alexa:

1. Download the Amazon Alexa app on youriPhone or Android.

2. Launch the app, then tap MENU, and go toSKILLS.

3. Search for your vehicle. Then tap “ENABLE.”

4. Select LINK ACCOUNT.

5. Log in using your vehicle’s Owner Account IDand password.

Examples of commands:

• “Alexa, ask Dodge Durango how much gas is inmy vehicle.”

• “Alexa, ask Jeep Grand Cherokee to send direc-tions to Iron Mountain to my vehicle.”

• “Alexa, ask Chrysler 300 to start my vehicle.”

A M A Z O N A L E X A — I FE Q U I P P E D

Android Auto Integration

With easy touchscreen navigation and voice rec-ognition, Android Auto brings useful informationand organizes it into simple cards that appear justwhen they are needed.

1. Download the Android Auto app from theGoogle Play store on your Android-poweredsmartphone.

2. Connect your Android powered smartphone toone of the media USB ports in your vehicle. Ifthe Android Auto app was not downloaded, itwill begin to download when you plug in yourdevice.

3. Once the device is connected and recognized,the “Phone” icon on the personalized menubar will automatically change to the AndroidAuto Icon.

Apple CarPlay Integration

Apple CarPlay is the smarter, safer way to use youriPhone to get directions with Apple Maps, listen toApple Music, make calls and send messages — allthrough the Uconnect touchscreen or with yourvoice through Siri.

To use CarPlay, make sure you are using iPhone5 or later, have Siri enabled in Settings, ensureyour iPhone is unlocked for the very first connec-tion only, and then follow these steps:

1. Connect your iPhone to one of the media USBports in your vehicle.

2. Once the device is connected and recognized,the “Phone” icon on the personalized menubar will automatically change to the CarPlayicon.

Android Auto

Apple CarPlay

A N D R O I D A U T O A N D A P P L EC A R P L AY — I F E Q U I P P E D

NOTE:

Long Press: Press and hold the VR button toactivate Siri or Google Assistant.

Short Press: Briefly tap the VR button to activatethe native Uconnect voice recognition system.

When using Android Auto or Apple CarPlay, besure to use the factory-provided cable that camewith your phone, as aftermarket cables may notwork.

NOTE:The Owner’s Mobile App content is applicable tovehicles sold in the U.S. market and are notavailable from the Canadian App Store or GooglePlay Store.

Key Features• Owner Information For Your Vehicle

• Accident Assistant

• Online Service Scheduling

• Roadside Assistance

• Maintenance History

• And More

To get this FREE application, go directly to theApp Store or Google Play Store and enter thesearch keyword “Dodge”.

The DRIVE DODGE Application is the essentialapp for owners of Dodge brand vehicles. The appputs driver and lifestyle information right in thepalm of your hand, anywhere you go. Whether it’sproviding information about specific product fea-tures, taking a tour through your vehicle’s equip-ment, staying up to date on your vehicle’s health,knowing what steps to take following an accident,or scheduling your next appointment, we knowyou’ll find the app an important extension of yourDodge vehicle. Simply download the FREE app,select your make and model and enjoy the ride.

D R I V E D O D G E M O B I L E A P P

Features/Benefits• Available for free on iOS and Android smart-

phones and tablets.

• Select Dodge brand vehicles from model year2011 to current model year.

• You can also add other Chrysler, Jeep, Ram,FIAT or Alfa Romeo vehicles.*

• Easy access to vehicle information anywhereyou go using categories, bookmarks, searchand an A-Z index.

• Vehicle information such as operating instruc-tions, maintenance, service history, vehiclecontrols and emergency procedures.

• Find a dealer or an FCA-certified repair facility.

• Easily document and email an accident report.

• A parking reminder that allows you to drop a pinon your location and navigate back to yourvehicle.

• Contact customer care with one click.

• Access to vehicle heritage, parts, accessories,and social media networks.

• Schedule your next service appointment.

• Available in English and Spanish.

*App supports selected vehicles from model year2011 to present.

To get this FREE application, go directly to theApp Store or Google Play Store and enter thesearch keyword “Dodge”.

Whether it’s providing information about specific product features, taking a tour through your vehicle’s heritage, knowing what steps to take following an

accident or scheduling your next appointment, we know you’ll find the app an important extension of your Dodge brand vehicle. Simply download the app, select your make and model and enjoy the ride. To get this app, go directly to the App Store® or Google Play® Store and enter the search keyword “Dodge” (U.S. residents only).

www.dodge.com/en/owners (U.S.) provides special offers tailored to your needs, customized vehicle galleries, personalized service records and more. To get this information, just create an account and check back often.

Get warranty and other information online – you can review and print or download a copy of the Owner’s Manual, Navigation/Uconnect manuals and the limited warranties provided by FCA US LLC for your vehicle by visiting www.dodge.com/en/owners (U.S.) or www.owners.mopar.ca (Canada). Click on the applicable link in the “Popular Topics” area of the www.dodge.com/en owners (U.S.) or www.owners.mopar.ca (Canada) homepage and follow the instructions to select the applicable year, make and model of your vehicle.

©2018 FCA US LLC . ALL R IGHTS RESERVED. DODGE IS A REGISTERED TRADEMARK OF FCA US LLC . APP STORE IS A REGISTERED TRADEMARK OF APPLE INC . GOOGLE PLAY STORE IS A REGISTERED TRADEMARK OF GOOGLE .

D O W N L O A D A F R E E E L E C T R O N I C C O P Y O F T H E M O S T U P - T O - D A T E O W N E R ’ S M A N U A L , M E D I A A N D W A R R A N T Y B O O K L E T B Y V I S I T I N G :

WWW.MOPAR.COM/EN-US/CARE/OWNERS-MANUAL.HTML

(U .S . RES IDENTS)

WWW.OWNERS .MOPAR.CA (CANADIAN RES IDENTS)

DODGE.COM (U .S . )

DODGE.CA (CANADA)

19

WD

-QR

G-A

A

SE

CO

ND

ED

ITIO

N

VEHICLE USER GUIDE — IF EQUIPPED Vehicle User Guide — If Equipped

KEY FOB Key Fob Battery Low

PASSIVE ENTRY Keyless Enter-N-Go — Passive EntryTo Unlock Using The Driver’s Or Passenger’s Front Door HandleTo Lock Using The Driver’s Or Passenger’s Front Door Handle

STARTING AND OPERATING Autostick Paddle ShiftersEco ModeEngine Stop/Start System (ESS) — If EquippedSport ModeElectric Power Steering (EPS)

SPEED CONTROL Speed ControlAdaptive Cruise Control (ACC) — If Equipped

SAFETY FEATURES Forward Collision Warning With Mitigation — If EquippedLaneSense — If Equipped

PARKSENSE ParkSense Rear Or ParkSense Front And Rear Park Assist — If Equipped

PARKVIEW Rear Back-Up Camera

SEATS Memory Seats

WINDSHIELD WIPER/WASHER FEATURES Wiper/Washer Controls

LIGHTS Automatic High Beam — If Equipped

INSTRUMENT CLUSTER DISPLAY Instrument Cluster Display Selectable Menu Items

SRT DRIVE MODES — IF EQUIPPED SRT Drive Modes

SIRIUSXM GUARDIAN — IF EQUIPPED ActivationFeaturesVehicle Finder And Send & Go

AMAZON ALEXA — IF EQUIPPED ANDROID AUTO AND APPLE CARPLAY — IF EQUIPPED Android Auto IntegrationApple CarPlay Integration

DRIVE DODGE MOBILE APP Key FeaturesFeatures/Benefits

2019 dodge durango quick reference guide · 2018. 12. 12. · 20 mph (32 km/h). to activate push...

Documents