2019 - magicplastics.com...prop65 info magicplastics.com 5 valves “smart” check® valves p l as...
TRANSCRIPT
2019
T H E R E L I A B L E S O U R C ESINCE 1985
Prevent and avoid costly service calls with Magic Plastics’new Vibeproof™ Locking Union Technology.
The Patent Pending design incorporates the use of a series of strategically placed Scallops on the Pump Union Nut and Tailpiece; hand tightening the nut will engage the lock, preventing the Union from loosening or backing out during vibration. The Vibeproof™ locking feature is available in a variety of Magic Plastics’ products including Pump Unions, Smart® Check Valves, Uni-Body Valves, Unions and High Heat Union Assemblies.
Magic Plastics, Incorporated • 25215 Avenue Stanford • Valencia, CA 91355 USA(661) 257-4485 • Toll-Free (800) 369-0303 • Fax: (661) 257-1911
www.magicplastics.com • email: [email protected] in Magic.
magicplastics.com
table of contents
P L A S T I C S 3
“Smart” Check® Valves 4-5Retro “Smart” Check® Valves 5Metric “Smart” Check® Valves 6Hose Clamp “Smart” Check® Valves 6Slide-Check & Ball-Check Combo Valves 6“CR2®” Corrosion Resistant Check Valves 7Check Valve Replacement Components 7Utility Molded In Place (MIP) Ball Valves 8Uni-Body Valves 8-10Metric Uni-Body Valves 10Spa On/Off Valves 10External Valve Locks (MagicSnap) 11Spa Drain Valves 11Compact Air Check Valves 12MagicVac 1290° Sweeps 13Spa Components and White Goods 13Manifolds 14MagicMend® Pipe Extenders (Schedule 40) 15MagicMend® Pipe Extenders (CL 200) 15MagicMend® Extender Fittings 15MagicMend® Insider Connectors 16Copper-To-PVC Adapters 16Heater-Pump Adapters 16Union Assemblies 17High Heat Union Assemblies 17-18Union Components 18Snap Nuts 19Heater Union Components 19Three-Piece Valves 20Tank Adapter Valves 20Specialty Products 21Hose Bibbs 22PVC Industrial Unions 22Expandable Repair Couplings 23Compression Couplings 23O-Rings 24Washer Rings 24Magic Wrench 24Replacement Components 25I.B.C. (Intermediate Bulk Container) Products 26
Prop65 Info4 magicplastics.com
ValVes
“Smart” Check® Valvesthe “smart” check® provides you with reliable back-flow prevention without the inline restriction of a conventional check valve. With
the use of high powered magnets, the “smart” check valve remains in the closed position to 2 PsI, opening fully when 2 lb. line
pressure is exceeded. the “smart” check has a spring-loaded gate mechanism allowing the valve to be installed in any orientation.
the valve is also available in a non-magnetic, ½ lb. spring-loaded version.
available in ½˝ through 3˝ IPs sizes. the “smart” check Valves are rated at 150 PsI at 73°f. all “smart” check Valves are also
available as a swing-check, without spring. Minimum order quantities apply. Please contact the factory direct for details.
P L A S T I C S
0821-05 ½˝SlipxSlip ½lb. ½˝ 12 5
0821-05C ½˝SlipxSlipClear ½lb. ½˝ 12 5
0826-05 ½˝FIPTxFIPT ½lb. ½˝ 12 5
0826-05C ½˝FIPTxFIPTClear ½lb. ½˝ 12 5
0821-07 ¾˝SlipxSlip ½lb. ¾˝ 12 5
0821-07C ¾˝SlipxSlipClear ½lb. ¾˝ 12 5
0826-07 ¾˝FIPTxFIPT ½lb. ¾˝ 12 5
0826-07C ¾˝FIPTxFIPTClear ½lb. ¾˝ 12 5
0821-10 1˝SlipxSlip ½lb. 1˝ 12 8
0821-10C 1˝SlipxSlipClear ½ lb. 1˝ 12 8
0821-15 1½˝SlipxSlip ½lb. 1½˝ 12 9
0821-15C 1½˝SlipxSlipClear ½lb. 1½˝ 12 9
0821-20 2˝SlipxSlip ½lb. 2˝ 12 13
0821-20C 2˝SlipxSlipClear ½lb. 2˝ 12 13
0821-20M 2˝SlipxSlipw/Magnet 2lb. 2˝ 12 14
0821-20MC 2˝SlipxSlipw/MagnetClear 2lb. 2˝ 12 14
0821-30 3˝SlipxSlip ½lb. 3˝ 8 22
0821-30C 3˝SlipxSlipClear ½lb. 3˝ 8 22
0822-20 2˝SpigotxSlip ½lb. 2˝ 12 13
0822-20C 2˝SpigotxSlipClear ½lb. 2˝ 12 13
0822-20M 2˝SpigotxSlipw/Magnet 2lb. 2˝ 12 14
0822-20MC 2˝SpigotxSlipw/MagnetClear 2lb. 2˝ 12 14
PART SIZE & DETAIL SPRING IPS QTY WT NUMBER DESCRIPTION TENSION SIZE CASE CASE
Prop65 Info 5magicplastics.com
ValVes
“Smart” Check® Valves
P L A S T I C S
0824-20 2˝SpigotxUnion ½lb. 2˝ 12 20
0824-20C 2˝SpigotxUnionClear ½lb. 2˝ 12 20
0824-20M 2˝SpigotxUnionw/Magnet 2lb. 2˝ 12 21
0824-20MC 2˝SpigotxUnionw/MagnetClear 2lb. 2˝ 12 21
0825-15 1½˝SlipxUnion ½lb. 1½˝ 12 11
0825-15C 1½˝SlipxUnionClear ½lb. 1½˝ 12 11
0825-20 2˝SlipxUnion ½lb. 2˝ 12 20
0825-20C 2˝SlipxUnionClear ½lb. 2˝ 12 20
0825-20M 2˝SlipxUnionw/Magnet 2lb. 2˝ 12 21
0825-20MC 2˝SlipxUnionw/MagnetClear 2lb. 2˝ 12 21
Retro “Smart” Check® Valvesswitch out and upgrade old style restrictive center-Poppet spring or old style swing check acme threaded valves with Magic Plastics’
Retro Replacement smart check® Valve bodies. there is no longer a need to purchase the entire valve assembly and discard the Union
fittings. Magic’s Retro is sold separately as a replacement body in 1½˝ and 2˝ sizes. Most importantly, you get the same full-flow
design as Magic Plastics’ innovative and popular smart check® Valves. the light ½ lb. spring allows you to install the valve in any
orientation while still achieving a 100% full-flow opening.
0823-15RT 1½˝Unionx1½˝UnionRetroCk.Valve ½lb. 1½˝ 12 10
0823-15RTC 1½˝Unionx1½˝UnionRetroCk.ValveClear ½lb. 1½˝ 12 10
0823-20RT 2˝Unionx2˝UnionRetroCheckValve ½lb. 2˝ 12 14
0823-20RTC 2˝Unionx2˝UnionRetroCk.ValveClear ½lb. 2˝ 12 14
Unions not included.
PART SIZE & DETAIL SPRING IPS QTY WT NUMBER DESCRIPTION TENSION SIZE CASE CASE
PART SIZE & DETAIL SPRING IPS QTY WT NUMBER DESCRIPTION TENSION SIZE CASE CASE
0823-10 1˝UnionxUnion ½lb. 1˝ 12 10
0823-10C 1˝UnionxUnionClear ½lb. 1˝ 12 10
0823-12 1¼˝UnionxUnion ½lb. 1¼˝ 12 11
0823-12C 1¼˝UnionxUnionClear ½lb. 1¼˝ 12 11
0823-15 1½˝UnionxUnion ½lb. 1½˝ 12 13
0823-15C 1½˝UnionxUnionClear ½lb. 1½˝ 12 13
0823-20 2˝UnionxUnion ½lb. 2˝ 12 25
0823-20C 2˝UnionxUnionClear ½lb. 2˝ 12 25
0823-20M 2˝UnionxUnionw/Magnet 2lb. 2˝ 12 26
0823-20MC 2˝UnionxUnionw/MagnetClear 2lb. 2˝ 12 26
Prop65 Info6 magicplastics.com
ValVes
Metric “Smart” Check® Valves
P L A S T I C S
Slide-Check & Ball-Check Combo ValvesMagic Plastics’ compact slide-check and ball-check combo Valves combine the Valve and a “smart” check Valve in the same
unit; saving you both excess time and labor during installation. the design of the “smart” check Valve will eliminate water
hammer noise while also providing you with the luxury of installing the valve in either orientation, horizontally or vertically. easy
connection buttress thread Unions allow for cleaning of both valves when necessary. slide-check combo Valves come equipped
with the Magicsnap external Valve lock to prevent accidental closure. all slide-check and ball-check combo Valves are made
from PVc and meet astM standards. available in 1½˝ and 2˝ slip configurations.
Ball-Check
Hose Clamp Check Valvessimplify your installation with Magic Plastics’ Hose clamp check Valves. there is no need to solvent weld, just secure the Hose
clamps with a screwdriver. the innovative design of the smart check® Valve will eliminate water hammer noise and also allows
you to install the valve in any orientation. this is the perfect valve for DIYs! all materials used to manufacture the valves meet
astM standards. available in 1½˝ and 2˝ sizes in White and clear PVc.
M823-15 50MM Union x Union ½ lb. 50mm 12 13
M823-15C 50MM Union x Union Clear ½ lb. 50mm 12 13
M823-20 63MM Union x Union ½ lb. 63mm 12 25
M823-20C 63MM Union x Union Clear ½ lb. 63mm 12 25
PART SIZE & DETAIL SPRING IPS QTY WT NUMBER DESCRIPTION TENSION SIZE CASE CASE
0821-15H 1½˝Slipx1½˝SlipHoseClampCheckValve ½lb. 1½˝ 12 14
0821-15HC 1½˝Slipx1½˝SlipHoseClampCk.ValveClear ½lb. 1½˝ 12 14
0821-20H 2˝Slipx2˝SlipHoseClampCheckValve ½lb. 2˝ 12 26
0821-20HC 2˝Slipx2˝SlipHoseClampCk.ValveClear ½lb. 2˝ 12 26
PART SIZE & DETAIL SPRING IPS QTY WT NUMBER DESCRIPTION TENSION SIZE CASE CASE
0860-15 1½˝SlipxSlipBall-CheckComboValve 12 28
0860-15C 1½˝SlipxSlipBall-CheckComboValveClear 12 28
0860-20 2˝SlipxSlipBall-CheckComboValve 12 42
0860-20C 2˝SlipxSlipBall-CheckComboValveClear 12 42
0850-15 1½˝SlipxSlipSlide-CheckComboValve 12 24
0850-15C 1½˝SlipxSlipSlide-CheckComboValveClear 12 24
0850-20 2˝SlipxSlipSlide-CheckComboValve 12 36
0850-20C 2˝SlipxSlipSlide-CheckComboValveClear 12 36
PART SIZE & DETAIL QTY WT NUMBER DESCRIPTION CASE CASE
Slide-Check
Prop65 Info 7magicplastics.com
ValVes
“CR2®” Corrosion Resistant Check Valvesthe “cR2®” back-flow prevention check valve is completely corrosion resistant, making it the ultimate solution for protecting
your expensive Heat exchangers from the potential damage of inline chlorinators while also maintaining a full-flow circulation
system. numerous features are included with the “cR2®” Valve including a proprietary designed Hastelloy® spring, Glass-filled
noryl injection molded shaft, 100% silicone Gasket and a clear, serviceable lid. the “cR2®” Valve is also equipped with a ½
lb. spring-loaded gate, allowing it to be installed in any orientation. the “cR2®” valve is available in 1½˝ slip, 2˝ slip and 2½˝
spigot. economy version without Hastelloy® spring available.
P L A S T I C S 7
*1½˝ Bushings Sold Separately.
7
3
2
1 54
6
Check Valve Replacement Components
0801-20H2 CPVC 2˝ 12 14
0801-20 Not Equipped with Hastelloy® Spring
0801-20 ECONOMY 2˝ 12 14
PART PART IPS QTY WT NUMBER DESCRIPTION SIZE CASE CASE
0060104028 Adapter,2˝Spigotx1½˝SlipWhite 24
0061304028 Adapter,2˝Spigotx1½˝SlipBlack 24
PART NUMBER SIZE & DETAIL DESCRIPTION QTY CASE
1 0403-006-6 #14x1˝PhillipsPanHead 6 Stainless Metal Screw 2 0191401020 Lid,2˝Swing-Spring 1 Check Valve 3 0301-154 O-Ring,2˝Swing-Spring 1 Check Valve 4 0405-001 Spring,2˝Swing-Spring 1 Check Valve 4 0405-001-H Hastelloy Spring 1
5 0401-005P Shaft,2˝Swing-Spring 1 Check Valve 6 0081201020 GateAssembly,2˝Swing- 1 Spring Check Valve 7 0060104028 Adapter,2˝Spigotx1½˝ 1 Slip White 7 0061304028 Adapter,2˝Spigotx1½˝ 1 Slip Black RK 0801-20H-RK Replacement Kit, Check Valve 1 Contains ID# 2, 3, 4(H), 5 & 6
ID PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
Economy Valve
CR2® Valve
Prop65 Info8 magicplastics.com
ValVes
Utility Molded-In-Place Ball Valvesspecifically designed for Residential, commercial and Industrial applications, the Magic MIP ball Valves are equipped with
ePDM seats and o-Rings, providing smooth operation and excellent chemical resistance. all Valves comply with astM 2467
standards and operate at a working pressure of 150 PsI at 73°f. Magic MIP ball Valves are available in ½˝ through 3˝ slip x slip
configurations.
threaded configurations and larger sizes (4˝, 6˝ and 8˝) are available upon request. Minimum order quantities apply. Please
contact the factory direct for details.
P L A S T I C S
Uni-Body Valvesthe innovative patented design of the Magic Uni-body valve was engineered for use in a wide variety of industries and
applications. the built in snap-lock guarantees zero flow restriction during operation while the cam-lock function provides a
100% positive seal when shutoff is required. We have also added a specially formulated dry lubricant to our seals and then
overmold them directly to the valve gate, eliminating the need to repair or replace the gate seals. the Magic Uni-body valve is
available in a variety of configurations in 1˝, 1½˝, 2˝ and 2½˝ IPs sizes.
QTY WT PART NUMBER SIZE & DETAIL DESCRIPTION CASE CASE
0250-05 ½˝SlipxSlipBallValve 36 6
0250-07 ¾˝SlipxSlipBallValve 18 5
0250-10 1˝SlipxSlipBallValve 25 11
0250-15 1½˝SlipxSlipBallValve 12 12
0250-20 2˝SlipxSlipBallValve 8 11
0250-25 2½˝SlipxSlipBallValve 6 25
0250-30 3˝SlipxSlipBallValve 6 26
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0401-10 1˝ 14/56 8/34
0401-15 1½˝ 14/56 9/36
0401-20 2˝ 12/48 10/41
0401-25 2½˝ 5/20 8/33
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
Slip3Slip Slip Union3Slip Union
0501-15 1½˝ 6/24 7/28
0501-20 2˝ 6/24 10/41
Prop65 Info 9magicplastics.com
ValVesUni-Body Valves
P L A S T I C S
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0412-15 1½˝ 14/56 8/33
0412-20 2˝ 12/48 10/39
0412-25 2½˝ 5/20 8/30
Slip3Spigot
0402-15 1½˝ 14/56 7/30
0402-20 2˝ 12/48 9/37
0402-25 2½˝ 5/20 8/30
Spigot3Spigot
0414-15 1½˝ 14/56 9/36
Slip3FIPT
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
Slip3MIPT 0413-15 1½˝ 14/56 9/36
Spigot3FIPT 0424-15 1½˝ 14/56 8/32
MIPT3MIPT 0403-15 1½˝ 14/56 9/35
B434-15=BLACK
0434-15 1½˝ 14/56 9/35
B434-15 1½˝ 14/56 9/35
MIPT3FIPTSpigot3Slip Union
0517-15 1½˝ 10/40 8/31
0517-20 2˝ 10/40 12/49
0517-25 2½˝ 5/20 10/39
0516-15 1½˝ 10/40 9/36
0516-20 2˝ 10/40 12/49
0516-25 2½˝ 5/20 10/40
Slip3Union
Prop65 Info10 magicplastics.com
ValVesUni-Body Valves
P L A S T I C S
Metric Uni-Body Valves 90° On/Off ValveMagic Plastics’ 90° on-off Valve is the perfect valve for spa
side operation of waterfalls, neck jets or just about any other
water feature in the spa. Unlike other valves of this type,
Magic’s 90° on-off valve is full-flow and requires only 3 full
turns to open or close the valve.
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0550-15 1½˝ 10/40 10/40
0550-20 2˝ 10/40 13/50
Slip3Swivel FBT
Custom cap colors and designs available. Contact factory for details and minimum order requirements.
0230-10 1˝ 48/96 20/40
B423-15=BLACK
Pool Hose3MIPT
0423-15 1½˝ 14/56 8/32
B423-15 1½˝ 14/56 8/32
Minimum order 500. This is not a stock item.
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
Slip3Slip
M401-15 50MM 14/56 9/36
M401-20 63MM 12/48 10/41
Equipped with washer ring only.
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0435-15 1½˝ 10/40 8/31
Slip Union3MIPT
0556-20 2˝ 12/48 11/38
Slip3MBT w/Washer Ring
Prop65 Info 11magicplastics.com
ValVes
External Valve Locksall of Magic Plastics’ Uni-body Valves are equipped with an internal patented snap-lock
open feature. three-Piece valves do not have this option. Magic Plastics’ external Valve
locks prevent accidental closure of the three-Piece valve and provides additional security
for the Uni-body valves. all external Valve locks come packaged in bags of 24 and are
available in 1½˝, 2˝ and 2½˝.
P L A S T I C S
Spa Drain Valvessimplify your servicing needs with Magic Plastics’ patented Drain Valve. Manufactured from impact modified abs and equipped
with a total of 5 teflon Impregnated o-Rings, the Magic Drain Valve is accessible to the consumer and simple to use. Designed
for skirt or Kick-Plate installations, the Drain Valve is flush mounted to the wall and secured in the closed position.
to operate, pull the spout out, leaving the exterior end cap on. once extracted, by design, the Drain Valve will stay in the closed
position. after the garden hose is installed, push the spout back in halfway to actuate the drain. the valve is also equipped with
a removable bezel in order for the skirt to be detached without disturbing the plumbing. the Magic Drain Valve also has built in
freeze protection and will drain approximately 5 gallons per minute. available in ½” slip, ¾” barb or ¾” spigot configurations.
for detailed illustrated instructions, visit our download center at www.magicplastics.com.
(Please note that all Uni-Body Valves are equipped with a patented internal snap-lock to prevent accidental closure.)
0455-05 ½˝SlipSpaDrainValve 54
0456-05 ¾˝BarbedSpaDrainValve 54
0457-05 ¾˝SpigotSpaDrainValve 54
PART NUMBER SIZE & DETAIL DESCRIPTION QTY CASE
0305-15 1½˝MagicSnapExternalValveLock 24
0305-20 2˝MagicSnapExternalValveLock 24
0305-25 2½˝MagicSnapExternalValveLock 24
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
Prop65 Info12 magicplastics.com
VALVES • MAGICVAC
Compact Air Check ValvesMagic Plastics’ redesigned compact air check Valve is ideal for all spa, Jetted tub and Pool applications. the air check Valve is
equipped with a light ¼ lb. stainless steel spring and a 100% silicone seal. the true compact design will save valuable space,
especially where two valves are required in tandem. the redesigned internal components improve flow and reduce restriction,
providing a quiet and smooth operation, virtually eliminating possible valve chatter during shutdown. available in 1½˝ slip - 2˝
spigot in PVc and Polycarbonate clear for higher heat applications and improved clarity.
P L A S T I C S
MagicVacthe MagicVac is operated by placing your thumb over the ergonomic air hole located at the top of the Vac, submerging it near
the area to be cleaned, then releasing your thumb. a rush of water and debris will fill the clear, UV stabilized chamber. Raise the
full chamber above the water line and allow it to drain, away from the spa. Virtually all debris will remain trapped in the built
in removable filter. Detach the end cap with a simple quarter turn and empty the debris. the MagicVac picks up sand, pebbles,
even small rocks. You will be able to reach areas in excess of seven feet away with the telescoping aluminum pole. the MagicVac
is completely serviceable and weighs less than two pounds.
0830-15 1½˝Slipx2˝Spigot¼lb.CompactAirCheckValve 45
0830-15C 1½˝Slipx2˝Spigot¼lb.CompactAirCheckValve(ClearPC) 45
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0690-1GEN MagicVac, Individual Box 1
0690-12GEN MagicVac, 12-Pack Individually Packaged 1
PART NUMBER SIZE & DETAIL DESCRIPTION QTY CASE
Prop65 Info 13magicplastics.com
90° SWEEPS • SPA COMPONENTS & WHITE GOODS
90° SweepsMagic Plastics’ sweep 90° fittings and assemblies are designed to maximize flow and minimize restriction. available in a variety
of configurations in 2˝ IPs sizes, Magic’s sweep 90°’s will provide you with the best performance in the industry while meeting
all of your plumbing requirements. all 90° sweeps are manufactured from quality PVc.
P L A S T I C S
Spa Components & White GoodsMagic Plastics continues to expand our line of spa components. contact the factory if you require an item or configuration that
is not listed below or in our catalog of products. Magic Plastics is continually growing our line of products and will consider your
product or component based on volume.
*Includes2˝MBTNutand-230O-Ring
0660-20 2˝SlipxSlip 65
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
0661-20 2˝SlipxSpigot 65
0662-20 2˝SlipxMBTHeater 60
0663-20 2˝SlipxUnionFlange 65
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
0668-20* 2˝SlipxPump 48 Union Half
0669-20* 2˝PumpUnion 36 Half x MBT Heater
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
0810-05 ½˝In-LineCheckValve 100
0805-05 ½˝POPCheckValve 150
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
0210-01 Mini Fiber/LED Lens 500
0350-05 Blower Atmosphere 50 Assist Tee
Prop65 Info14 magicplastics.com
ManIfolDs
Manifoldseasily fabricate custom stack lengths with our complete line of Water and air Manifolds. Precision barb fittings assure a
permanent seal. the compact designs of our Manifolds are ideal for space limitations. all Manifolds utilize standard clear Vinyl
tubing. custom configurations are available, contact the factory for details.
P L A S T I C S14
Accepts 3⁄8˝vinyltubing.
Accepts 3⁄8˝vinyltubing.
Accepts¾˝vinyltubing–threadsare½˝MPT.
Includes2plugs–portsare½˝slip.
Includes 2 Plugs
Accepts¾˝vinyltubing.
Accepts 3⁄8˝vinyltubing.
Accepts¾˝vinyltubing.
Accepts¾˝vinyltubing.
Accepts¾˝vinyltubing.
Accepts¾˝vinyltubing.
Accepts 3⁄8˝vinyltubing.Includes2endcapsand 4 plugs. Stackable.
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
0320-05 ½˝7-PortAirManifold 50
0341-10 1˝SlipxSlip 60 6-Port Air Manifold
0330-05 ½˝MPT 75 3-Port Air Intake Manifold
0388-15 1½˝SlipxSlip 50 6-Port Water Manifold 0386-15 1½˝SlipxSpigot 50 6-Port Water Manifold
0342-10 1˝SlipxSlip 60 8-Port Air Manifold
0343-10 1˝SlipxSlip 60 10-Port Air Manifold
PART SIZE & DETAIL PKG NUMBER DESCRIPTION QTY
0361-20 2˝SlipxSlip 100 2-Port Barbed Water Manifold 0362-20 2˝SlipxSpigot 100 2-Port Barbed Water Manifold
0363-20 2˝SlipxDead 150 End 2-Port Barbed Water Manifold
0369-20 2˝SlipxSlip 70 4-Port Barbed Water Manifold 0364-20 2˝SlipxSpigot 66 4-Port Barbed Water Manifold
0365-20 2˝SlipxDead 90 End 4-Port Barbed Water Manifold
0368-20 2˝SlipxSlip 50 6-Port Barbed Water Manifold 0366-20 2˝SlipxSpigot 50 6-Port Barbed Water Manifold
Accepts¾˝vinyltubing.
0367-20 2˝SlipxDeadEnd 60 6-Port Barbed Water Manifold
0321-10 3-in-11˝12-Port 50 Air Manifold
0360-00 2˝Water 100 Manifold Plug
Prop65 Info 15magicplastics.com
RePaIR fIttInGs
Magicmend® Pipe Extenderssave valuable fittings and time with the MagicMend® Pipe extenders. the MagicMend® is extremely effective and easy to use.
simply cut the defective fitting from the system, remove it and install the extender. the MagicMend® will work at any glued
plumbing joint, providing a permanent, invisible repair with insignificant flow restriction. the MagicMend® is available in ½˝
through 4˝ IPs sizes for schedule 40 Pipe and 1˝, 1¼˝, 1½˝ and 2˝ sizes for class 200 Pipe.
P L A S T I C S
Slips inside Schedule 40 pipe.
0301-05 ½˝ 48 2
0301-07 ¾˝ 48 2
0301-10 1˝ 48 3
0301-12 1¼˝ 48 5
0301-15 1½˝ 48 5
0301-20 2˝ 48 8
0301-25 2½˝ 48 18
0301-30 3˝ 48 22
0301-40 4˝ 48 36
PART IPS QTY WT NUMBER SIZE CASE CASE
Magicmend® Pipe Extenders - Schedule 40
Fits over 1½˝ or 2˝fittings.
0303-15 1½˝ 48 11
0303-20 2˝ 48 15
PART IPS QTY WT NUMBER SIZE CASE CASE
Magicmend® Extender Fittings
Slips inside Class 200 pipe.
0304-10 1˝ 48 3
0304-12 1¼˝ 48 5
0304-15 1½˝ 48 5
0304-20 2˝ 48 8
PART IPS QTY WT NUMBER SIZE CASE CASE
Magicmend® Pipe Extenders - Class 200
Magicmend® Extender Fittingsthe MagicMend® extender fitting is designed to glue over fittings where there is not a sufficient amount of pipe left for a
connection. simply remove any excess pipe and connect the MagicMend® by gluing over the existing fitting. the opposite end
of both the 1 ½” and 2” extender fitting will accept either 1 ½” pipe or a 2” fitting so you have the option of continuing the
plumbing with either pipe size. the MagicMend® extender fittings are available in 1 ½˝ and 2˝ IPs sizes.
Prop65 Info16 magicplastics.com
REPAIR FITTINGS • ADAPTERS
Magicmend® Insider ConnectorsWhy use an additional fitting when you can use a MagicMend® Insider connector? the MagicMend® Insider connector will join
two pieces of PVc schedule 40 pipe together. should a pipe be cut off flush with concrete or buried underground, a MagicMend®
will easily solve the problem. the MagicMend® Insider connectors are available in 1˝, 1¼˝, 1½˝, 2˝, 3˝ and 4˝ IPs sizes.
P L A S T I C S
Copper-To-PVC Adaptersthis is the ideal fitting for an easy and smooth transition from copper to PVc pipe. fittings are assembled with buna-70
o-Rings that provide a positive water tight seal and also an internal stainless steel gripper ring to prevent the pipe from
pulling out, ensuring a solid connection. available in 1½˝ and 2˝ IPs sizes.
Heater-Pump AdaptersMagic’s adapter bushings are designed to increase a 1½˝ Mbt fitting to a 2˝ Mbt fitting simply by threading the adapter to the
female threaded fitting. the internal thread of the bushing is 1½˝ fbt with an o-ring (included), ensuring a positive seal . the
external thread is 2˝ fbt. You can choose from two configurations, one with o-ring groove for Heater applications and one without
0-ring groove for Pump Union applications. adapters are manufactured from quality PVc.
Connects Schedule 40 pipe.
0302-10 1˝ 48 3
0302-12 1¼˝ 48 5
0302-15 1½˝ 48 6
0302-20 2˝ 48 9
0302-30 3˝ 48 20
0302-40 4˝ 48 34
PART IPS QTY WT NUMBER SIZE CASE CASE
Magicmend® Insider Connectors
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY WT
0606-15 1½˝Slip-2˝SpigotCopper-to-PVCAdapter 24 13
0606-20 2˝SlipCopper-to-PVCAdapter 18 11
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY WT
0060150019 Adapter,1½˝FBTx2˝MBTw/O-RingGroove 228 48
0060151019 Adapter,1½˝FBTx2˝MBT 228 49
Prop65 Info 17magicplastics.com
UnIon asseMblIes
Union Assemblieseasy connection buttress threads and deep socket connections with glue traps make the Magic Union assemblies reliable and
leak free. In addition, Magic Plastics’ Unions are also equipped with our Pat. Pending Vibeproof® technology. Magic Union
assemblies are available in a variety of configurations in 1½˝, 2˝ and 2½˝ IPs sizes.
High Heat Union AssembliesMagic Plastics’ self-sealing High-Heat Unions prevent plumbing failures due to extreme heat buildup caused by the Pump
running dry. Made from durable Gfn3, the High-Heat Unions include a positive o-Ring seal, eliminating the need for additional
thread sealants. the Unions also incorporate Magic Plastics’ Pat. Pending Vibeproof® technology. available in 1 ½” and 2” IPs
sizes and rated at 175 PsI @ 75°f.
P L A S T I C S
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0602-15 1½˝PumpUnionHalf 115
0602-20 2˝PumpUnionHalf 72
0602-25 2½˝PumpUnionHalf 50
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0611-15 1½˝SlipHeaterUnionHalfw/SplitNut 50
0611-18 1½˝Slip-2˝SpigotHeaterUnionHalfw/SplitNut 50
0611-20 2˝SlipHeaterUnionHalfw/SplitNut 50
0604-20 2˝45°SpigotUnionHalf 50
0605-20 2˝45°SlipUnionHalf 50
0650-15 1½˝SlipxSlipSelf-AligningUnionAssembly 50
0650-18 2˝Slipx1½˝Slip-2˝SpigotSelf-AligningUnionAssembly 25
0650-20 2˝SlipxSlipSelf-AligningUnionAssembly 25
0615-15 1½˝MIPx1½˝Slip-2”SpigotHigh-HeatUnionAssembly 27
0615-20 2˝MIPx2˝SlipHigh-HeatUnionAssembly 36
Prop65 Info18 magicplastics.com
UNION ASSEMBLIES • UNION COMPONENTS
Union Componentsall Magic Plastics Union components are manufactured from quality PVc or abs. Magic Union components come bulk packaged and are available in 1½˝, 2˝ and 2½˝ IPs sizes.
P L A S T I C S
MBT = Male Buttress ThreadsFBT = Female Buttress Threads
AllUnionComponentsUtilizeO-Rings:1½˝-2252˝-2302½˝-234
0120103015 1½˝FBTUnionNut 135
0120103020 2˝FBTUnionNut 90
0120103025 2½˝FBTUnionNut 50
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0121109015 1½˝FBTRepairSplitNutSetw/Screws 125
0121109020 2˝FBTRepairSplitNutSetw/Screws 100
0121109025 2½˝FBTRepairSplitNutSetw/Screws 74
0050104020 2˝45°SpigotTailpiecewithO-RingGroove 100
0050104520 2˝45°SlipTailpiecewithO-RingGroove 100
0050103015 1½˝SlipTailpiecewithO-RingGroove 184
0050103020 2˝SlipTailpiecewithO-RingGroove 112
0050103025 2½˝SlipTailpiecewithO-RingGroove 100
0050105015 1½˝MBTx1½˝SlipTailpiece 100
0050105018 2˝MBTx1½˝Slip-2˝SpigotTailpiece 100
0050105020 2˝MBTx2˝SlipTailpiece 100
High Heat Union Assemblies
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0615-20S 2˝MIPx2˝SlipSweepHigh-HeatUnionAssembly 25
Prop65 Info 19magicplastics.com
SNAP NUTS • UNION COMPONENTS
Heater Union Componentsall Magic Plastics Heater Union components are manufactured from quality PVc or abs. Magic Heater Union components are bulk packaged and are available in 1½˝ Mbt and 2˝ Mbt with ½˝ through 2˝ slip ends and glue wells. our Washer Rings are recommended for all Magic Heater Union components and are sold separately.
P L A S T I C S
Snap NutsMagic Plastics’ snap nut is uniquely designed to be used on ss heater housings as an alternative to a split nut. the snap nut eliminates the need for additional hardware, allowing for installation in a fraction of the time. no tools are required! the snap nut is manufactured from quality abs and is available in 1½˝ and 2 sizes.
Clip and Nut must be purchased as a set.
C015C 1½˝SnapNutClip 350
C015N 1½˝SnapNut 100
C020C 2˝SnapNutClip 350
C020N 2˝SnapNut 100
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
All Heater Union Components Utilize Washer Rings.1½˝MBT - 224WR 2˝MBT - 229WR
MBT = Male Buttress ThreadsFBT = Female Buttress Threads
0121108015 1½˝FBTHeaterSplitNutSetw/Screws 125
0121108020 2˝FBTHeaterSplitNutSetw/Screws 100
0121108025 2½˝FBTHeaterSplitNutSetw/Screws 74
0050106007 1½˝MBTx¾˝Slip-1˝SpigotTailpiecewithO-RingGroove 100
0050106010 1½˝MBTx1˝SlipTailpiecewithO-RingGroove 100
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0050106007-OF 1½˝MBTx¾˝Slip-1˝SpigotTailpiecewithO-RingGroove(Offset)100
0050106010-OF 1½˝MBTx1˝SlipTailpiecewithO-RingGroove(Offset) 100
0050106012 1½˝MBTx1¼˝SlipTailpiecewithO-RingGroove 100
0050106015 1½˝MBTx1½˝SlipTailpiecewithO-RingGroove 100
0050106015-SH 1½˝MBTx1½˝SlipTailpiecewithO-RingGroove(Short) 100
0050107018 2˝MBTx1½˝Slip-2˝SpigotTailpiecewithO-RingGroove 100
0050107020 2˝MBTx2˝SlipTailpiecewithO-RingGroove 100
0050107020-SH 2˝MBTx2˝SlipTailpiecewithO-RingGroove(Short) 270
Prop65 Info20 magicplastics.com
THREE PIECE VALVES • TANK ADAPTER VALVES
Three Piece Valvesthe three-Piece Valve design can be easily disassembled, allowing you to clean and service the valve. the easy push-pull slide
and 100% positive seal is ideal for a number of applications. Magic three-Piece valves are available in a variety of configurations
in both 1½˝ and 2˝ IPs sizes.
P L A S T I C S
Tank Adapter ValvesMagic Plastics’ tank adapter valves were designed specifically for bulkhead applications. both standard and low Profile
designs are available in the popular Uni-body style as well as the serviceable three-Piece design. 1½˝ size, white or black.
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0416-15 1½˝ 10/40 9/40
B416-15 1½˝ 10/40 9/40
Slip3Tank Adapter Uni-Body
B416-15=BLACK
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0116-15 1½˝ 10/40 11/43
0116-15LP 1½˝ 10/40 10/41
B116-15 1½˝ 10/40 11/43
B116-15LP 1½˝ 10/40 10/41
Slip3Tank Adapter
B116-15 = Black0116-15LP=LowProfile
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0112-15 1½˝ 12/48 10/40
0112-20 2˝ 12/48 12/48
Slip3Spigot
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0101-15 1½˝ 12/48 10/42
0101-20 2˝ 12/48 13/50
Slip3Slip
0102-15 1½˝ 12/48 10/38
0102-20 2˝ 12/48 12/47
Spigot3Spigot
Prop65 Info 21magicplastics.com
sPecIaltY PRoDUcts
Specialty Products
P L A S T I C S
0203-004 2˝PlugandSealRing-EPDMSeal 1
0621-30 3˝MaleClosetFlange 90
0622-30 3˝FemaleClosetFlange 70
0610-20 2˝45°DrainOutletAdapter 1
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
Prop65 Info22 magicplastics.com
HOSE BIBBS • PVC UNIONS
Hose BibbsMagic Plastics’ Hose bibbs are manufactured from quality PVc and are completely serviceable. Designed for use for temperatures
up to 120° f at 150 PsI. Pipe and Hose threads comply with astM standards. available in ½˝ and ¾˝.
P L A S T I C S
PVC Industrial Unionsall industrial unions are equipped with acMe threads and ePDM o-Rings. available in ½˝ through 4˝ IPs sizes. 6˝ and 8˝
available, please contact the factory direct for pricing and lead-times.
10650-05 ½˝UnionAssembly 48
10650-07 ¾˝UnionAssembly 48
10650-10 1˝UnionAssembly 48
10650-15 1½˝UnionAssembly 48
10650-20 2˝UnionAssembly 24
10650-25 2½˝UnionAssembly 12
10650-30 3˝UnionAssembly 12
10650-40 4˝UnionAssembly 8
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0203-05 ½˝ 48/192 8/35
0203-07 ¾˝ 48/192 8/36
QTY CASE/ WT CASE/ PART NUMBER IPS SIZE MASTER MASTER
PVC Hose Bibbs
Prop65 Info 23magicplastics.com
coUPlInGs
Expandable Repair Couplingsthe slip x spigot design of the couplings allows for a quick, simple and permanent solution to repair broken pipes. You can
also use the expandable coupling for a union in piping installations. the double o-Ring seal design provides added leak
protection against pipe deflection and also insures smooth movement during installation. expandable Repair couplings are
made from quality PVc and are available in ½˝ through 4˝ IPs sizes. 6˝ and 8˝ available, please contact the factory direct
for pricing and lead-times.
P L A S T I C S
Compression Couplingsour general use compression couplings are ideal for both repairs and installations. santoprene gaskets provide a 100%
maintenance-free seal. this is the perfect fitting for emergency situations, no solvent required. compression couplings are
made from quality PVc and are available in ½˝ through 4˝ IPs sizes. 6˝ and 8˝ available, please contact the factory direct
for pricing and lead-times.
0620-05 ½˝ExpansionCoupling 48
0620-07 ¾˝ExpansionCoupling 48
0620-10 1˝ExpansionCoupling 48
0620-15 1½˝ExpansionCoupling 24
0620-20 2˝ExpansionCoupling 24
0620-30 3˝ExpansionCoupling 12
0620-40 4˝ExpansionCoupling 6
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0630-05 ½˝CompressionCoupling 48
0630-07 ¾˝CompressionCoupling 48
0630-10 1˝CompressionCoupling 48
0630-15 1½˝CompressionCoupling 24
0630-20 2˝CompressionCoupling 24
0630-30 3˝CompressionCoupling 12
0630-40 4˝CompressionCoupling 6
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
Prop65 Info24 magicplastics.com
O-RINGS • WASHER RINGS • MAGIC WRENCH
O-Ringsall o-Rings are manufactured from buna-70. Magic Plastics o-Rings fit the products listed in our catalog. other suppliers may have
variant o-Ring dimensions and specifications. other materials are available upon request. Please contact the factory for details.
P L A S T I C S
Washer RingsMagic Plastics Washer Rings are specifically designed to fit the Unions and Heater Union components and assemblies listed in
our catalog.
Magic Wrenchthe new Magic Wrench removes 9 different pump lids and numerous equipment lids. Don’t risk damaging your pump lid by using
hammers and 2 x 4’s, safely remove your pump lids with the Magic Wrench. Manufactured from super-tough Glass filled nylon,
the Magic Wrench is the perfect tool to carry with you on service calls.
to see the Magic Wrench in action, visit our download center at www.magicplastics.com.
0301-225-12 Kit,O-Ring1½˝Union 12
0301-229-12 Kit,O-Ring2˝I.B.C.Valve 12
0301-230-12 Kit,O-Ring2˝Union 12
0301-234-12 Kit,O-Ring2½˝Union 12
0301-223-12 Kit,O-Ring1½˝CoppertoPVCAdapter 12
0301-227-12 Kit,O-Ring2˝CoppertoPVCAdapter 12
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
0301-224W-12 Kit,WasherRing1½˝Union 12
0301-229W-12 Kit,WasherRing2˝Union 12
0302-020B-12 Kit,WasherRing2˝SlipxMBTValve 12
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
PPTW Magic Wrench 12
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
Prop65 Info 25magicplastics.com
RePlaceMent coMPonents
Replacement Components
P L A S T I C S
0030101015 SlipFlange1½˝ 1
0030101020 SlipFlange2˝ 1
0040101015 SpigotFlange1½˝ 1
0040101020 SpigotFlange2˝ 1
0603-15 1½˝ValveBodywithHandle 1
0603-20 2˝ValveBodywithHandle 1
0080301015-12 Kit,Seals1½˝Valve 12
0080301020-12 Kit,Seals2˝Valve 12
0402-001-12 Kit, Nut with Nylon Insert 10-24 12
0403-001-12 Kit,ScrewHexwithWasher10-24x13⁄8˝ 12
0090101000 Handle1½˝&2˝(ForThree-PieceValve) 1
0090102000 Handle1½˝&2˝Uni-Body 1
0090102025 Handle2½˝Uni-Body 1
0120102015 Nut1½˝MSPTwithFlangeWhite 1
0120502000 Nut1½˝MSPTwithFlangeBlack 1
0302-002-12 Kit,FlatWasher1½˝BulkheadFitting 12
PART NUMBER SIZE & DETAIL DESCRIPTION PKG QTY
Three-Piece
Uni-Body
Prop65 Info26 magicplastics.com
I.b.c. PRoDUcts
I.B.C. Productsa number of products are available for this growing industry. the durable Uni-body valve attaches to the I.b.c. liner by way of a
union-like buttress threaded flange. a probe cutter allows the valve to be attached securely to the liner in any position, providing
a positive seal connection before the liner membrane is pierced for evacuation. the I.b.c. Valve and flanges are available in a
variety of configurations. In addition, the flanges are available in both PVc and llDPe materials.
P L A S T I C S
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
0504-20 2˝ 10/40 11/44
IBC Valve
0404-20 2˝ 12/48 9/37
FIPT3FIPT Valve
0520-20 2˝ 10/40 11/44
MBT3MIPT/FIPT Valve
0701-20 2˝ 12/48 7/27
Probe Cutter
(For Standard IBC Valve)0706-20=LLDPE0708-20=PVC0709-20=SANTOPRENE
0705-20=LLDPE0707-20=PVC
0710-00=LLDPE0711-00=PVC
Standard
PART IPS QTY CASE/ WT CASE/ NUMBER SIZE MASTER MASTER
Buttress Plug
0710-00 SPECIAL 108 23
0711-00 SPECIAL 108 30
0703-20 2˝ 125/500 16/65
Nut & Flange Assembly
0706-20 2˝ 108 34
0708-20 2˝ 108 39
0709-20 2˝ 108 39
FIPT Threaded Flange
0705-20 2˝ 144 23
0707-20 2˝ 144 29
FBT Threaded Flange
WARRANTY
WARRANTY FOR STANDARD PRODUCTS- Seller warrants all Seller products to be free from defects in materials and workmanship in normal use for a period of one (1) year from the date of invoice. If Customer receives defective goods or parts, Customer may send such defective goods or parts prepaid to Seller in Valencia, California accompanied by a letter stating the nature of the defect. After examination, if there is determined to be a defect in materials or workmanship, Seller shall, at its sole option and discretion, rework, repair or replace the defective goods or parts, or reimburse Customer for the cost of the goods or parts. All shipping costs for return of defective goods and replacements are the responsibility of Customer. Customer agrees that Seller will not be held responsible for parts or labor (other than Sellerʼs parts and labor) in connection with reworking, repairing or replacing of such goods or parts. THE WARRANTY STATED ABOVE IS IN LIEU OF ALL OTHER WARRANTIES, CONDITIONS OR OTHER TERMS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF TERMS AS TO QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR OTHERWISE, WHETHER IMPLIED BY CUSTOM OR LAW.
LIMITATION OF DAMAGES - IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE ARISING OUT OF OR RELATING TO THE TRANSACTION CONTEMPLATED HEREBY OR TO THE MANUFACTURE, SALE, DELIVERY, RESALE, REWORK, REPAIR, REPLACEMENT, OR USE OF ANY PRODUCTS, WHETHER SUCH LIABILITY IS BASED IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF SELLER HAD BEEN WARNED OF THE POSSIBILITY OF ANY SUCH DAMAGES.
THE WARRANTIES AND DISCLAIMERS OF WARRANTIES SET FORTH HEREIN MAY NOT BE EXTENDED, ALTERED OR OTHERWISE MODIFIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY SELLER.
TERMS: NET 30 DAYS (O.A.C.)MINIMUM ORDER $50.00 NET (CASE QUANTITY)
LEAD TIME: 1-3 BUSINESS DAYS
MAGIC PLASTICS,INC.25215 Ave. Stanford • Valencia, CA 91355(661) 257-4485 • Toll Free (800) 369-0303
FAX (661) 257-1911www.magicplastics.com
Email [email protected]