2020 promotion...travel overall height motor power list price exc. vat inc. vat gdm50b 16mm 5 127mm...

®

2 0 2 0 P r om o t i o n

Promotion valid from 1st June to 31st August 2020

NEWMAGNETIC

DRILLSSEE PAGE 3

RECEIVE A FREE ITEM WITH SELECTED PRODUCTS!

SAVE UP TO

51% OFF LIST PRICE!

WORKSHOP BENCH GRINDERSSEE PAGE 4

2 Visit our website today to order your FREE Sealey Tool Catalogue™

Fitted with safety switch.

£59.95EXC. VAT

INC. VAT£71.94

Pillar Drills

Model No.Chuck

SizeNo. of

SpeedsSpindle to

Centre ColumnSpindle Travel

Overall Height

Motor Power List Price Exc. VAT Inc. VAT

GDM50B 16mm 5 127mm 60mm 750mm 220W(370W) £342.95 £219.95 £263.94

GDM120B 16mm 16 165mm 80mm 960mm 350W(550W) £469.95 £299.95 £359.94

GDM140F 16mm 12 127mm 60mm 1500mm 220W(370W) £449.95 £269.95 £323.94

GDM160F 16mm 16 165mm 80mm 1580mm 350W(550W) £535.95 £349.95 £419.94

GDM200F 16mm 16 178mm 80mm 1630mm 450W(650W) £664.95 £389.95 £467.94

£29.95EXC. VAT

INC. VAT£35.94

• Provides quick and precise sharpening of 3-19mm(1/8-3/4") HSS twist drill bits.

• Features an angle gauge with presets at 41° (Countersink), 49°, 59°, 68° and 88°.

• Also features a rotating neck which aids grinding both sides of the drill bit.

• Model No. SMS01• List Price £27.95

Drill Bit Sharpener Grinding Attachment

Super Drill Vices

• Free Speed: 4200rpm.• • Gives a perfect angle/sharpened head to make drilling with

your bit easier.• Suitable for up to 118° HSS Titanium, Cobalt, Carbon

Steel and Split Point bits in range Ø3-13mm.• Model No. SMS2008• List Price £84.95

Bench Mounting Drill Bit Sharpener

• Drill stand with cast iron base for vertical drilling using a hand drill.

• Supplied with 65mm drill vice with quick jaw release.

• Features a preset depth control and stop for drilling depths of up to 60mm.

• For use with hand drills with a collar diameter of 38mm if used with the adaptor bush or 43mm if used without.

• Model No. DS01• List Price £44.95

500mm Drill Stand with Cast Iron Base & 65mm Vice

• Fully ground HSS Cobalt drill bits manufactured to DIN 338.• 5% Cobalt helps to increase life of drill bit.• 135° Split point is self-centring for easier penetration.• Suitable for drilling high carbon

steel and stainless steel.• Sizes from 1 to 10mm in

0.5mm increments.• Model No. DBS170CB• List Price £329.95

• Steel construction with stepped jaws and machined foot.• Suitable for hand-held use or for drill table mounting using

two bolt-slides machined into the casting.• Fitted with replaceable jaws.

170pc HSS Cobalt Fully Ground Drill Bit Assortment 1-10mm

• Keeps operator’s hands away from the drilling area

• Holes on the base allow for clamp to be attached to machinery T-slots or directly on to work tables or benches.

• Model No. AK2141• List Price £39.95

Table/Workbench C-Clamp with Swivel Foot

• Suits light industrial, agricultural and woodworking applications.

• Fitted with rack and pinion feed shafts with adjustable preset depth control for repetitive work.

• 16mm(5/8") Capacity chuck No. MT2.• Fitted with no-load voltage switch and locking

cover to prevent accidental starting.

Bench Pillar Drills (GDM50B & GDM120B)

Floor Pillar Drills (GDM140F, GDM160F & GDM200F)

£16.95EXC. VAT

INC. VAT£20.34

Supplied with Drill Vice

Model No. GDM120B

Model No. GDM140F

Model No.Jaw

OpeningList Price Exc. VAT Inc. VAT

100DV 100mm £91.45 £59.95 £71.94

120DV 120mm £147.95 £99.95 £119.94

Model No. 120DV

£19.95EXC. VAT

INC. VAT£23.94

£219.95EXC. VAT

INC. VAT£263.94

View our full range of Pillar Drills online at www.sealey.co.uk

Enter our competition at www.sealey.co.uk/competitions. Competition closes 30th September 2020.

S A V E U P T O

O F F L I S T£275

Prices exclude VAT unless stated otherwise 3

sealey tools®

Heavy-Duty Aluminium Bodied Motors on PDM Models.

Model No. Supply List Price Exc. VAT Inc. VAT

MAG60230V 230V ~ 50Hz £699.95 £499.95 £599.94

MAG60110V 110V ~ 50Hz £699.95 £499.95 £599.94

Heavy-Duty Models

MAG60230VHD 230V ~ 50Hz £999.95 £779.95 £935.94

MAG60110VHD 110V ~ 50Hz £999.95 £779.95 £935.94

Model No. Supply List Price Exc. VAT Inc. VAT

MAG35230VLP 230V ~ 50Hz £599.95 £469.95 £563.94

MAG35110VLP 110V ~ 50Hz £599.95 £469.95 £563.94

Model No. Chuck Size List Price Exc. VAT Inc. VAT

MDTCM8 M8 £29.95 £18.95 £22.74

MDTCM10 M10 £29.95 £18.95 £22.74

MDTCM12 M12 £29.95 £18.95 £22.74

MDTCM14 M14 £29.95 £18.95 £22.74

MDTCM16 M16 £29.95 £18.95 £22.74

MDTCM18 M18 £29.95 £18.95 £22.74

MDTCM20 M20 £29.95 £18.95 £22.74

Model No.Chuck

SizeNo. of

SpeedsSpindle to

Centre ColumnSpindle Travel

Overall Height

Motor Power List Price Exc. VAT Inc. VAT

PDM125B 16mm 16 165mm 80mm 1050mm 370W(600W) £494.95 £329.95 £395.94

PDM155B 16mm 16 190mm 80mm 1050mm 370W(600W) £579.95 £399.95 £479.94

PDM170F 16mm 16 170mm 80mm 1610mm 370W(600W) £559.95 £389.95 £467.94

PDM210F 16mm 16 190mm 80mm 1610mm 370W(600W) £639.95 £419.95 £503.94

PDM240F 20mm 16 216mm 80mm 1635mm 750W(1000W) £849.95 £579.95 £695.94

PDM260F 20mm 12 260mm 120mm 1710mm 1100W(1500W) £1,069.95 £789.95 £947.94

• Fitted with no-load voltage switch and locking cover to prevent accidental starting.

• Supplied with an electrically inter-locked chuck guard.

Integrated Work Light on PDM Models (Excluding PDM125B & PDM170F).

S E R I E S

• Made from heavy-duty die-cast magnesium alloy with a variable speed gearbox for greater accuracy.

• Fitted with a powerful magnet to ensure units stay adhered at any angle and a double dovetail groove to increase the stroke length.

•increase the quality of the cut.

• Can be used with a 16mm twist drill chuck.• Designed for use in fabrication, construction and other applications when drilling/tapping

ferrous metal.

60mm Magnetic Drilling Machines

Magnetic Drill Tapping Chucks

• Manufactured using high quality components for performance and reliability.•• Fitted with a powerful magnet to ensure units stay adhered at any angle.•• Designed for use in fabrication, construction and other applications when drilling ferrous metal.

35mm Low Profile Magnetic Drilling Machines

Model No. PDM260F

Model No. PDM125B

Model No. MAG60230V

Model No. MAG60110V

Model No. MAG35230V

Model No. MAG35110V

Model No. MDTCM10

NEW

NEW

AVAILABLE EARLY JULY



NEW

FREE

FREE

Rechargeable Wireless Sound Bar when you buy any PDM Pillar Drill

4 SMD LED Lanternwhen you buy any MAG series Drilling Machine

• Model No. SB1• List Price £49.95

• Model No. LED181• List Price £14.95

S A V E U P T O

O F F L I S T£280


Machine Shop

Model No. Stone Diameter List Price Exc. VAT Inc. VAT

BG150WVS Ø150mm £133.95 £87.95 £105.54

BG200WVS Ø200mm £194.95 £129.95 £155.94

• 250W/230V Induction motor drive.• Fitted with stone guard, eye shield and spark arrestor.• Includes water tray for cooling hot materials.• Features built-in wheel dresser for cleaning, sharpening and truing grinding wheel surfaces.•• The sanding belt can be easily adjusted by the quick release tracking system.• Pivoting work light for added visibility in poorly illuminated areas.• Model No. BG150BS• List Price £136.95

Ø150mm Bench Grinder with 50mm Belt Sander & Work Light 250W

• Induction motor drive suitable for general use.• Fitted with stone guards, adjustable eye shields and spark arrestors.•• Variable speed allows for better control of grinding and sharpening.• Integral coolant tray for convenient cooling of sharpened/ground item.

Variable Speed Bench Grinders

Model No. BG150CX

Model No. BG200XL

Model No. BG150XWL

Model No. BG150XW/99

Model No. Supplied withMotor Power

Stone Diameter

Heavy-DutyWork Light

No Load Speed

Axle Diameter

Weight List Price Exc. VAT Inc. VAT FREEBG150CX 2 x Stones 150W Ø150mm 2950rpm Ø13mm 6kg £55.95 £39.95 £47.94

BG150XL/96 2 x Stones 370W Ø150mm 2850rpm Ø13mm 10.5kg £114.95 £74.95 £89.94

BG150XLW/98 1 x Stone 1 x Wire Wheel 370W Ø150mm 2850rpm Ø13mm 10.5kg £125.95 £79.95 £95.94

BG150XD/99 2 x Stones 450W Ø150mm 2850rpm Ø13mm 11kg £129.95 £85.95 £103.14

BG150XW/99 1 x Stone 1 x Wire Wheel 450W Ø150mm 2850rpm Ø13mm 10.5kg £149.95 £94.95 £113.94

BG150XWL 1 x Stone 1 x Wire Wheel 250W Ø150mm 2850rpm Ø13mm 8.6kg £133.95 £84.95 £101.94

BG150WL 2 x Stones 250W Ø150mm 2850rpm Ø13mm 9kg £117.95 £77.95 £93.54

BG200WL 2 x Stones 550W Ø200mm 2850rpm Ø16mm 16kg £164.95 £104.95 £125.94

BG200XL 2 x Stones 600W Ø200mm 2850rpm Ø16mm 16.5kg £157.95 £99.95 £119.94

BG200/99 2 x Stones 600W Ø200mm 2850rpm Ø16mm 20kg £199.95 £129.95 £155.94

Bench Grinder Floor Stand

or

£59.95EXC. VAT

INC. VAT£71.94

• Slotted mounting holes

bench grinders with central mounting holes.

• Features adjustable feet for uneven surfaces.

• Height: 900mm.• Model No. BGST• List Price £75.45

Model No. BG150WVS

Model No. BG200WVS

Sealey Bottle Opener GripMAX


S A V E U P T O

O F F L I S T£70

£84.95EXC. VAT

INC. VAT£101.94


sealey tools®

£149.95EXC. VAT

INC. VAT£179.94

£6.95EXC. VAT

INC. VAT£8.34

£17.95EXC. VAT

INC. VAT£21.54

Model No.Jaw


CV100XT 100mm £73.95 £55.95 £67.14

CV125XT 125mm £115.95 £81.95 £98.34

CV150XT 150mm £169.95 £112.95 £135.54

CV200XT 200mm £267.95 £184.95 £221.94

Model No. Application List Price Exc. VAT Inc. VAT

CVXTB100 CV100XT £14.95 £9.95 £11.94

CVXTB125 CV125XT £22.95 £15.95 £19.14

CVXTB150 CV150XT £29.95 £20.95 £25.14

CVXTB200 CV200XT £39.95 £27.95 £33.54

Model No. Optional BaseJaw

WidthJaw


USV100 USVB100 100mm 132mm £129.95 £84.95 £101.94

USV125 USVB125 125mm 178mm £169.95 £114.95 £137.94

USV150 USVB150 150mm 205mm £214.95 £144.95 £173.94

USV200 USVB200 200mm 225mm £278.95 £199.95 £239.94

Model No. Stone Diameter Bore List Price Exc. VAT Inc. VAT

BG150/WW1 Ø150 x 13mm Ø13mm £18.45 £14.95 £17.94

BG150/WW2 Ø150 x 20mm Ø13mm £21.25 £16.95 £20.34

BG200/WW1 Ø200 x 13mm Ø16mm £24.95 £19.95 £23.94

Model No. Diameter Type Grade List Price Exc. VAT Inc. VAT

BG150BW Ø150 Buffing Fine £9.05 £7.45 £8.94

BG150BWC Ø150 Buffing Coarse £11.25 £8.95 £10.74

BG200BW Ø200 Buffing Fine £12.75 £9.95 £11.94

BG150/15 Ø150 Grinding Fine £11.25 £8.95 £10.74

BG150/16 Ø150 Grinding Coarse £11.25 £8.95 £10.74

BG200/15 Ø200 Grinding Fine £18.75 £14.95 £17.94

BG200/16 Ø200 Grinding Coarse £18.75 £14.95 £17.94

Model No.

Working Surface(W x D)

Overall Size(W x D x H)

List Price Exc. VAT Inc. VAT

ANV5 115 x 68mm 215 x 102 x 112mm £34.95 £22.95 £27.54

ANV11 170 x 90mm 285 x 120 x 136mm £62.95 £46.95 £56.34

• Hobby table vice of robust iron construction.

• Ideal for use with portable workbenches.

• Features replaceable vice jaws and swivel base.

• Suitable for hobby and light professional markets.

• Jaw Opening: 60mm.• Model No. CV50• List Price £29.95

50mm Dovetail Hobby Vice

Heavy-Duty Professional Cast Iron Fixed Base Vices

• Bench mounting.• Features replaceable jaws.• Precision engineered screw thread.• Fixed base mounts directly onto workbench.• Lifetime guarantee* against manufacturing defects.

SG Iron Vices

• Bench mounting vice with cast iron body and replaceable, diamond pattern face jaws.

• Features a 360° moving body and swivel base.

• A choice of three jaws: straight jaws, pipe jaws or V-jaws.

• Includes a large anvil and two scale rulers for accurate work.

• Jaw Opening: 125mm.• Jaw Width: 150mm.• 2 Year guarantee* against

breakage.• Model No. MFV150• List Price £199.95

150mm Cast Iron Multifunction Swivel Base Vice

• Suitable for cleaning, truing and sharpening grinding faces.• Suitable for use with any bench grinder.• Grinding Face (L x W): 45.5 x 13mm.• Model No. BG2• List Price £9.95

Diamond Grinding Wheel Dresser

• Bench mounting cast iron anvils, featuring single bick and rectangular working surfaces.

Anvils

• Brass coated steel wire wheels for bench grinders.

•13, 16, 19, 22 & 25mm spindles.

• Fits any Sealey brand bench grinder and other popular brands.

• Suitable for general workshop descaling/cleaning operations.

Wire Wheels

Consumables

Model No. USV100

Model No. CV100XT

Model No. ANV5

Model No. ANV11

Model No. BG150/WW1

Model No. BG150BW

Model No. BG150/15

Swivel Bases

• 360° Swivel adaptor plates for bench vices.

• Super quality cast iron construction.

• Replaceable steel jaws.• Includes an anvil.• 2 Year guarantee*

against breakage.

S A V E U P T O

O F F L I S T£83

S A V E U P T O

O F F L I S T£79



• Three speed settings.• Heavy-duty cast base and cutting arm.• Oil bath gear box and life lubricated bearings for

quiet, smooth operation.• Full guarded blade and magnetic no-load voltage

switch.• Complies with CE directive.•

workshop mobility.• Model No. SM5• List Price £484.95

• Fully CE approved.• Heavy-duty power bandsaw with hydraulic cutting

arm control for a smooth cut.• 300mm Capacity at 90° and 170mm at 45°.• 750W/230V Motor.•

switch.•

the arm being dropped onto the workpiece and to ensure smooth cutting performance.

• Supplied with bi-metal blade.• Model No. SM35CE• List Price £1,564.95

150mm 3-Speed Metal Cutting Bandsaw with Vice & Stand

300mm Horizontal Bandsaw with Hydraulic Arm

£329.95EXC. VAT

INC. VAT£395.94

£1,099.95EXC. VAT

INC. VAT£1,319.94

Industrial

• Fully CE approved.• Heavy-duty power bandsaws

with hydraulic cutting arm control for a smooth cut.

•damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.

• Bow swivels up to 60° angle allowing workpiece to always sit in a central position.

Industrial Power Bandsaws

400mm Horizontal Bandsaw with Hydraulic Arm

Model No. SM354CE

• Suitable for lubricating and cooling drill bit or blade and workpiece when cutting mild steel.

5L Cutting Oils

Model No. NCO/5L

Model No. SCO/5L

Model No. Type List Price Exc. VAT Inc. VAT

NCO/5L Neat £49.95 £39.95 £47.94

SCO/5L Soluble £51.45 £40.95 £49.14

Model No.Max.

CapacityMotor Power List Price Exc. VAT Inc. VAT

SM354CE 210mm 900W £1,929.95 £1,249.95 £1,499.94

SM355CE 255mm 1100W £2,679.95 £1,699.95 £2,039.94

• Large cutting capacity.• Ideal for industrial and agricultural engineering applications.• Precision machined cast iron saw bed.• Hydraulic feed saw arm gives greater cutting control allowing clean results.• 24V system for coolant pump and motor controls gives added safety to operator.• Over-current sensor on motor cuts power in the event of blade jam.• All blade and pulley covers protected by safety switches.• Model No. SM353CE• List Price £4,599.95

FREERechargeable Wireless Sound Bar when you buy an SM5 or SM35CE

• Model No. SB1• List Price

£49.95

For our full range of Bandsaw Blades, see page 1151 of the Sealey Catalogue.

S A V E

O F F L I S T£1600

S A V E

O F F L I S T£465

S A V E

O F F L I S T£155

S A V E U P T O

O F F L I S T£980

£2,999.95EXC. VAT

INC. VAT£3,599.94


sealey tools®

• Bench mounting machine

most materials.• Features include a 350W

motor, variable speed drive, working table with T-slots to enable clamping of workpieces and Metric graduated compound scales.

• Incorporates a tilting column which allows drilling/milling of workpiece at ±45° from vertical.

• Supplied with 13mm chuck and accessory kit for adjusting and setting.

• Complies with Safety of Machinery (Safety) Directives 1992 (and amendments) and is fully CE approved.

• An optional stand is available, order Model No. SM3002ST.

• Model No. SM2502• List Price £1,079.95

Mini Drilling/Milling Machine

• Bench mounting multifunction mini drill, mill and lathe with variable speed giving

• Features two 150W motors, one to operate the drill/mill and the other to power the lathe.

• The lathe cutting feed can be power driven or advanced manually.

• Supplied with Metric graduated scales and all necessary tools required for setting and adjusting.

• Complies with Machinery Directive and is fully CE approved.

• Optional stand available, order Model No. SM3002ST.


Mini Lathe & Drilling Machine

• 300mm Between centres.• Precision built metalworking lathe, ideal for

the small workshop, professional or home engineer and model maker.

• Powered by a 300W motor this compact unit features variable speed reversible drive and powered cutting facility for right and left hand threads.

• Supplied with self-centring 3 jaw chuck, 4-way tool post, swarf tray and rear splash guard.

• Supplied with emergency stop button and chuck guard.


Metalworking Lathe 300mm Between Centres

• Heavy cast base with adjustable sanding table.• Fitted with magnetic no-volt release switch to prevent accidental starting after belt jam.• Quiet and powerful 750W/230V motor.• Suitable for metal and fabrication workshops.• Floor stand available as an optional extra, order Model No. SM100/ST.• Model No. SM100• List Price £644.95

100mm Power Belt Sander

• Model No. SM2503A• List Price £869.95


Lathe only Lathe & Drill Head

• One of a comprehensive range of high quality accessories for Model No’s SM3002, SM2502 and SM2503 metalworking lathes.

• Overall Size (W x D x H): 800 x 355 x 880mm.

• Model No. SM3002ST

• List Price £125.95

Stand for SM3002, SM2502, SM2503

• Indexable turning tool sets with precision high quality tips.

• Ideal for a wide variety of projects.• Includes right and left hand turning

and facing tools.• Supplied with tip removal tools and

storage box.

Indexable Lathe Turning Tool Sets

£829.95EXC. VAT

INC. VAT£995.94

£89.95EXC. VAT

INC. VAT£107.94

£799.95EXC. VAT

INC. VAT£959.94

£629.95EXC. VAT

INC. VAT£755.94

£999.95EXC. VAT

INC. VAT£1,199.94

£449.95EXC. VAT

INC. VAT£539.94

Model No. Piece Shank List Price Exc. VAT Inc. VAT

SM3025CS1 5pc 10mm £43.95 £29.95 £35.94

SM3025CS2 5pc 8mm £39.95 £27.95 £33.54

SM3025CS5 7pc 8mm £104.95 £78.95 £94.74

SM3025CS6 7pc 10mm £121.95 £89.95 £107.94

Model No. SM3025CS1

View our full range of Drill Bits at www.sealey.co.uk

S A V E

O F F L I S T£195

S A V E U P T O

O F F L I S T£300


sealey tools®

• High quality industrial presses ideal for pressing, bending and extruding.

• Supplied with pressure gauge.

• Suitable for many automotive and industrial applications.

Hydraulic Presses

• Cast steel frames with machined steel toothed arbor.

• Four position table with varying sizes of cut-outs for pressing operations.

• Suitable for repetitive manufacturing operations.

Arbor Press

Model No. Capacity List Price Exc. VAT Inc. VAT

PK500 0.5tonne £79.95 £49.95 £59.94

PK1000 1tonne £129.95 £84.95 £101.94

PK2000 2tonne £269.95 £159.95 £191.94

PK3000 3tonne £459.95 £299.95 £359.94

Model No.

TypeTable

ApertureRam

StrokeCapacity

OverallHeight


YK10B Bench 115mm 180mm 10tonne 1060mm £359.95 £224.95 £269.94

YK10F Floor 84mm 175mm 10tonne 1657mm £464.95 £314.95 £377.94

YK20F Floor 100mm 185mm 20tonne 1796mm £659.95 £454.95 £545.94

Foldaway claws auto-retract enabling

use on ground or

without needing to disconnectBenchclaw™

from your chosen tool.

•with Benchclaw™ to be quickly and easily mounted to conventional workbenches with a maximum platform thickness of 20mm.

• Suitable for a variety of tools including mitre saws and bench grinders with mounting hole centres between 100mm to 375mm.

• Required Workbench Jaw Opening: 100mm.• Suitable for all 8", 10" and most 12" Mitre Saws on the market.• Visit www.sealey.co.uk to view our demonstration video.• Model No. SBC01• List Price £29.95

Benchclaw™

• Powerful 1800W motor.• Features integral aluminium workpiece supports which store inside the aluminium base.• Fitted with a 60-tooth TCT blade for fresh wood.•

for use with mild steel, aluminium and wood with nails.• Max. cut of up to 310mm at 0° bevel.••• Features locking increments at mitre stops 0°, 15°, 22.5°, 30°, 45° Left & Right.• Cross Cut (0° Bevel x 0° Table): 85 x 310mm.• Mitre Cut (0° Bevel x 45° Table): 85 x 200mm.• Bevel Cut (45° Bevel x 0° Table): 50 x 215mm.• Model No. SMS255• List Price £239.95

250mm Double Sliding Compound Mitre Saw

£17.95EXC. VAT

INC. VAT£21.54

£224.95EXC. VAT

INC. VAT£269.94

£44.95EXC. VAT

INC. VAT£53.94

£179.95EXC. VAT

INC. VAT£215.94

Model No. YK10B

Model No. YK10F

Model No. YK20F

Model No. PK500

• Floor standing metal folder with 910mm capacity.• Manually operated and suitable for folding up to

22 gauge sheet.• Lifetime guarantee*.• Model No. DF910• List Price £326.95

910mm Floor Standing Metal Folder

•mounting plates.

• Capable of bending a 2mm steel sheet, of limited length, up to and beyond a 90° angle.

• Unique patented endless design and removable folding plate allows the user to fold any length of sheet metal up to 1mm thick.

• Adjustable fold plate to help achieve the cleanest fold possible.

• Ideal for the small garage or restoration operation.• Capacity: 20 Gauge Sheet, Ø1mm Rod.• Model No. TS01• List Price £154.95

• Bench mounting, 8mm plate-steel disc cutter suitable for cutting up to 16 gauge steel sheet.

• Deep throat and small cutting disc allows tighter curves to be cut than traditional straight blade cutters. Ratchet action cutter blade.

• Suitable for car restoration work as well as general workshop use.

• Model No. DC16• List Price £73.95

700mm Vice/Bench Mounting Metal Folder

Sheet Metal Disc Cutter

£49.95EXC. VAT

INC. VAT£59.94

60tpu Multipurpose Cut-Off Saw Blade Ø250 x 2.4mm/ Ø30mm

• Model No. SMS255B• List Price

£63.95

S A V E U P T O

O F F L I S T£160S A V E U P T O

O F F L I S T£205

S A V E O V E R

O F F L I S T£100

£109.95EXC. VAT

INC. VAT£131.94


• Includes chisel sharpening gauge.• Contents: Taper Punches; Ø2 x 135, Ø3 x 145, Ø4 x 150,

Ø5 x 160, Ø6 x 170mm, Pin Punches; Ø2 x 110, Ø3 x 120, Ø4 x 125, Ø5 x 135, Ø6 x 145mm, Centre Punches; Ø3 x 125, Ø5 x 150mm, Cold Chisels; 10 x 140, 13 x 150, 16 x 165mm, Chisel Gauge.


16pc Punch & Chisel Set

• Manufactured from Chrome Molybdenum steel.•• Ideal for commercial, industrial and agricultural applications.• Contents: Ø10mm, Ø12mm, Ø14mm, Ø16mm.• Length: 350mm.• Model No. AK9147• List Price £65.95

4pc 350mm Extra-Long Parallel Pin Punch Set

• Manufactured from Chrome Molybdenum steel.•• Contents: 12, 16, 19, 22mm.• Length: 350mm..• Model No. AK9148• List Price £65.95

4pc Extra-Long Chisel Set

• Professional engineer’s set.• Contents: 340g(12oz), 450g(1lb), 680g(1.5lb).• High quality drop-forged steel heads.• Genuine straight grained hickory shafts.• Manufactured in accordance with BS 876.• Model No. AK203• List Price £46.95

3pc Ball Pein Hammer Set with Hickory Shaft

• Vinyl dipped handle shafts for extra comfort.• Contents: Flat Parallel, Flat Taper, Half-Round, Three-Square,

Square Form, Round Form, Oval Form, Knife Form,Crossing File, Barrette File.

• Average Overall Length: 140mm.• Model No. AK577• List Price £18.45

10pc Diamond Needle File Set

• Impact adjustment from 15 to 25kg.• Simply push down to release the spring.• Tip hardened to 57-60 HRC.• Ergonomic comfort grip handle.• Length: 160mm.• Model No. AK91320• List Price £26.95

Sheathed Automatic Centre Punch

••

workpiece.• Contents: Half-Round, Round, Square,

Three-Square, Flat & Hand File.• Model No. AK580• List Price £34.95

6pc Engineer’s File Set

Punches, Chisels & Measuring

£29.95EXC. VAT

INC. VAT£35.94

£27.95EXC. VAT

INC. VAT£33.54

£37.95EXC. VAT

INC. VAT£45.54

£11.95EXC. VAT

INC. VAT£14.34

£37.95EXC. VAT

INC. VAT£45.54

£14.95EXC. VAT

INC. VAT£17.94

£21.95EXC. VAT

INC. VAT£26.34

• Double cut for faster removal of material from workpiece.

• Features comfort grip handles with hanging hole.

Engineer’s Files

Model No. Length TypeList

PriceExc. VAT Inc. VAT

AK5801

150mm

Half-Round £7.95 £4.95 £5.94

AK5802 Round £7.45 £4.95 £5.94

AK5803 Square £7.45 £4.95 £5.94

AK5804 Three-Square £7.95 £4.95 £5.94

AK5805 Flat £7.95 £4.95 £5.94

AK5806 Flat Hand File £7.95 £4.95 £5.94

Model No. Length TypeList


AK5731

200mm

Half-Round £9.45 £5.95 £7.14

AK5732 Round £8.95 £5.95 £7.14

AK5733 Square £8.95 £5.95 £7.14

AK5734 Three-Square £9.45 £5.95 £7.14

AK5735 Flat £9.45 £5.95 £7.14

AK5736 Flat Hand File £9.45 £5.95 £7.14

Half-Round

RoundSquare

Three-Square

FlatFlat Hand File


®


sealey tools

• 8mm LCD display.•• Metric and Imperial readings with conversion between the two.• Zero setting control for comparative measurement.• Model No. S0707• List Price £30.95

0-150mm(0-6") Digital Electronic Vernier Caliper

• 11mm LCD display.• Hardened and tempered

stainless steel with satin

• Metric and Imperial readings with conversion between the two.

• Zero setting control for comparative measurement.

• Supplied in storage case.

Digital Vernier Calipers

• Brushed steel yoke.•

thimble and sleeve with heavily machined knurling and locking mechanism.

• Supplied with thimble adjustment wrench.

• Model No. AK9630M• List Price £28.95

0-25mm External Micrometer

• Digital micrometers with spring loaded satin chrome pin.

• Easy-to-read LCD digital

• Zero display in any position for relative and tolerance readings.

• Display switchable between Metric and Imperial units.

• Includes serial port connection for computer interface.

Digital External Micrometers

•used precision measuring/checking devices.

• Contents: 150mm Digital Vernier Caliper, 0-25mm Micrometer, Dial Indicator, Bevelled Edge Square, 150mm(6") Stainless Steel Rule.

• Model No. AK96SET• List Price £108.95

5pc Measuring Tool Set

• Quality made solid steel construction.• Hardened, tempered and precision polished.• Blade edges and stock face to within ±0.016mm tolerance.• Supplied in wooden storage case.• Lifetime guarantee*.• Model No. AK11000• List Price £56.95

4pc Precision Steel Square Set

• Precision mechanism with Ø55mm dial and locking, rotating bezel.

• Interchangeable foot.• Lifetime guarantee*.

Dial Gauge Indicators

• Precision ground stand base with rotary controlled magnet.

• Suitable for use with scribers and dial gauges.


Magnetic Stand without Indicator

• Precision manufactured tool with hardened steel tips.

• Features straight and 90° tips with knurled body.


200mm Double End Engineer’s Scriber

••• The digital display is clear with easy calibration.• Measuring range from 0° to 360°.• Metric/Imperial rules which can be

locked in any position.

Digital Angle Rules

£16.95EXC. VAT

INC. VAT£20.34

£19.95EXC. VAT

INC. VAT£23.94

£77.95EXC. VAT

INC. VAT£93.54

£19.95EXC. VAT

INC. VAT£23.94

£29.95EXC. VAT

INC. VAT£35.94

£3.95EXC. VAT

INC. VAT£4.74

Model No. Range List Price Exc. VAT Inc. VAT

AK962EV 0-150mm(0-6") £44.95 £27.95 £33.54

AK9622EV 0-200mm(0-8") £66.95 £42.95 £51.54

AK9623EV 0-300mm(0-12") £91.45 £59.95 £71.94

Model No. Range List Price Exc. VAT Inc. VAT

AK9638D 0-12.7mm(0-0.5") £28.95 £15.95 £19.14

AK9635D 0-25mm(0-1") £121.95 £74.95 £89.94

Model No. Travel List Price Exc. VAT Inc. VAT

AK961 1/2" £36.95 £19.95 £23.94

AK961M 10mm £38.95 £22.95 £27.54

Model No. Length List Price Exc. VAT Inc. VAT

AK7200 200mm £40.95 £19.95 £23.94

AK7300 300mm £46.95 £22.95 £27.54

Model No. AK962EV

Model No. AK9638D

Model No. AK9635D

Model No. AK961

Model No. AK7200


sealey tools

or

®


• Composite handles with hanging holes.•

brushes, for components such as glow/spark plugs and

(90mm head) for removal of rustand welding slag.


3pc Auto Engineer’s Wire Brush Set

• Hardened steel blades and forged grips, this comprehensive set is ideal for removing stubborn/seized nuts.

• Capacity: 9-12, 12-16, 16-22, 22-27mm.• Model No. AK85• List Price £53.95

4pc Nut Splitter Set

• HSS Screw extractors.• Five sizes range from #0 to #4.• Suitable for extracting screws

ranging from 6-14mm.• Supplied in storage case.• Model No. AK7228• List Price £19.45

5pc HSS Screw Extractor Set

• Heat treated Chrome Molybdenum steel screw extractors and fully ground step drill bits.

• Step drills produce a conical hole which when used with the corresponding extractor provide increased grip to easily

• Special design of the extractors cut into the side of the hole allowing increased force and make


• Composite handgrip with interchangeable swivel cutting bits.

• Spare cutter stored in handle.• Suitable for deburring pipes and

sheet materials.• Model No. DB01• List Price £14.25

•holes, slots and edges.

• Features aluminium body with pocket clip and rotating replaceable cutting blade.

• For use on steel, copper, brass and plastic.

• Length: 147mm.• Model No. DB02• List Price £9.65

10pc Step Drill Screw/ Bolt Extractor Set

• Adjustable thread restorer to suit Metric and Imperial threads from 31.75 to 127mm(1-1/4" to 5") external diameter.

• Simply attach to undamaged section of thread, then wind back the thread with the knurled adjuster and the chaser will restore the damaged thread section.

• Built-in storage for six dies.• Model No. AK315• List Price £124.95

Universal External Thread Repairer/Chaser

• Manufactured with alloy steel cutters to remove damaged metal and burrs.• Features a 1/4"Hex shank for use with a drill or hex driver.• Applicable for use on pieces from 3mm to 18mm in diameter.

Deburring/Chamfer Tools

Deburring Tool with Spare Blade

Deburring Tool with Blade

• Combination of 400 and 1000 grit surfaces.• Whetstone will sharpen carbon steel, high speed steel

(HSS) and tungsten carbide.• Supplied with an adjustable robust non slip holder which

can be used with stones from 135mm to 215mm in length.

• Dimensions (W x D x H): 285 x 70 x 25mm.

• Model No. SCSS1• List Price £51.95

Combination Diamond Sharpening Whetstone with Adjustable Stone Holder

£3.65EXC. VAT

INC. VAT£4.38

£39.95EXC. VAT

INC. VAT£47.94

£8.95EXC. VAT

INC. VAT£10.74

£5.95EXC. VAT

INC. VAT£7.14

£89.95EXC. VAT

INC. VAT£107.94

£64.95EXC. VAT

INC. VAT£77.94

£29.95EXC. VAT

INC. VAT£35.94

£34.95EXC. VAT

INC. VAT£41.94

£9.95EXC. VAT

INC. VAT£11.94

Model No.

Type Diameter List Price Exc. VAT Inc. VAT

DB03 Internal Ø3-18mm £15.95 £10.95 £13.14

DB04 External Ø3-19mm £21.95 £14.95 £17.94

Repairing

Model No. DB03

• Manufactured from Chrome Molybdenum steel.• Rapid acting helix aids screw removal.• Sizes: 1/8"-1/4", 1/4"-5/16", 5/16"-7/16",

7/16"-9/16", 9/16"-3/4".• Lifetime guarantee*.• Model No. AK722• List Price £10.75

5pc Helix Type Screw Extractor Set

• Three high-speed HSS M2

•

• Allows clog-free, precision

holes with just three bits.• Size #1: 4-12mm.• Size #2: 4-22mm in 2mm

increments.• Size #3: 4-30mm in 2mm

increments.• Model No. AK4743• List Price £97.95

3pc Spiral Flute HSS M2 Step Drill Bit Set

• Left hand drill bits, used for the extraction of

• Manufactured from 4121 HSS steel.• Contents: 3.2, 4.8, 6.4, 8, 8.7mm.• Supplied in display case.• Model No. AK8189• List Price £17.45

5pc Left Hand Spiral Drill Bit Set

£6.95EXC. VAT

INC. VAT£8.34

£12.45EXC. VAT

INC. VAT£14.94


sealey tools®

• Complete range of Metric Tungsten taps and dies, 6mm up to 24mm.

• Includes Tap Wrench, T-Bar Tap Wrench and Steel Die Wrench.


45pc Tap & Die Set Split Dies

• Professional split dies with machined lead-ins for ease of use.

• Die holder features self-centring mechanism for straight and accurate thread cutting.

• Includes T-handled tap wrench and Metric screw pitch gauge.

• Sizes: 3-12mm.• Model No. AK3040• List Price £75.95


• Manufactured from high quality alloy steel.• Includes a steel die holder with retention screws and knurled

handles.• Stored in a portable steel storage case.• Contents: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1, 7 x 1,

8 x 1.25, 10 x 1.5, 12 x 1.75mm, Die Holder.• Model No. AK3009• List Price £22.95

9pc Split Die Set

• Includes a taper, plug and bottom tap in each size.

• Contents: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1, 8 x 1.25, 10 x 1.5, 12 x 1.75mm(1 x Plug, 1 x Taper, 1 x Bottom Tap of each).


21pc Tap Set

• M3 to M12 alloy steel tap and die set.• Taps supplied in three types for each size, taper (starting),

second tap (intermediate) and plug (bottoming).• Matched by equivalent sized dies.• Provides all functions required for a professional engineer.• Set includes tap wrench, steel die handle,

screw pitch gauge and screwdriver.• Model No. AK3015• List Price £44.95


• High quality carbon steel taps and dies.• Dies have machined lead-ins for ease of use.• Includes one long handled adjustable tap wrench

with professional type sliding jaw.• Steel die holder with retention screws

suitable for dies from M3 up to M12 and Metric thread gauge.

• Contents: Taps & Dies; 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1, 8 x 1.25, 10 x 1.5,12 x 1.75mm,Tap Wrench, Die Holder, Metric Thread Gauge.


17pc Tap & Die Set

• Split dies with machined lead-ins for ease of use.

• Die holder features self-centring mechanism forstraight andaccurate thread cutting.

• Set includes intermediate and plug taps.

• Sizes: 3-12mm.• Model No. AK3028• List Price £60.95

28pc Mechanic’s Tap & Die Set Split Dies

• Use for accurate tapping and reaming in tight spaces.

• Fits onto 3/8"Sq drive ratchets.

• Knurled ring twists to help tighten taps securely.

• Maximum Square Size: 4mm, 7mm.


2pc Adjustable Tap Socket Set• Dies feature machined lead-ins for ease of use.• Set includes one T-Bar style tap wrench and

one steel die holder with retention screw, suitable for dies from M3 up to M8 (included in this set).

• Contents: Taps & Dies; 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1, 8 x 1.25mm, T-Bar Tap Wrench, Die Holder.


12pc Tap & Die Set

£99.95EXC. VAT

INC. VAT£119.94

£16.95EXC. VAT

INC. VAT£20.34

£19.95EXC. VAT

INC. VAT£23.94

£34.95EXC. VAT

INC. VAT£41.94

£11.95EXC. VAT

INC. VAT£14.34

£12.95EXC. VAT

INC. VAT£15.54

£19.95EXC. VAT

INC. VAT£23.94

£34.95EXC. VAT

INC. VAT£41.94

£49.95EXC. VAT

INC. VAT£59.94

NEW NEW

FREETapping & Cutting Fluid 500ml• Model No.

SCSCF400• List Price

£8.95


• Suitable for a variety of bodyshop applications such as cutting through panels, sills and chassis members.

• Excellent for initial crash-repair preparation when quick removal of damaged panels is required.

• Fitted with safety trigger device.• Supplied with a starter pack of blades.• Air Supply: 90psi - 6cfm.• Model No. SA34• List Price £104.95

Reciprocating Air Saw

• Versatile tool, suitable for cutting car panel thickness material and exhaust brackets.

• Fitted with metal safety guard and throttle safety device to prevent accidental operation.

• Cutting disc not included. Order Model No. PTC/3C.• Model No. SA25• List Price £42.95

Ø75mm Air Cut-Off Tool

• Aluminium housing with articulated sanding arm.

• Features belt tracking control, heavy-duty nose roller and one-handed trigger operation.

• Suitable for sanding otherwise inaccessible areas such as around door-shuts.

• Supplied with three belts.• Model No. SA35• List Price £143.95

10 x 330mm Air Belt Sander

• Suitable for cutting straight lines in steel metal sheet up to 1.2mm thickness.• Pistol grip design for increased control and manoeuvrability.• Powerful yet lightweight machine for the professional user.• Requires only 4cfm air supply.• Weight: 1.22kg.• Model No. SA56• List Price £56.95

Pistol Type Air Shears

• Curve design provides integral strength.

• Rubber grip handle for added comfort.

• Supplied with four rivet nozzles to accept 2.4mm(3/32"), 3.2mm(1/8"), 4mm(5/32") and 4.8mm(3/16") rivets.


Hand Riveter

• Aluminium head with steel three-piece jaws for aluminium, steel and stainless steel rivets.

• Patented design allows one-handed fast operation.• Suitable for repetitive riveting tasks.• Supplied with four nozzles.• Accepts 2.4mm(3/32"), 3.2mm(1/8"),

4mm(5/32"), 4.8mm(3/16").• Model No. AK3990• List Price £49.95

Quick Action Hand Riveter

• Suitable for rivet nuts in aluminium, steel and stainless steel.

•and access to restricted spaces.


Short-Arm Threaded Nut Riveter

£69.95EXC. VAT

INC. VAT£83.94

£89.95EXC. VAT

INC. VAT£107.94

£19.95EXC. VAT

INC. VAT£23.94

£29.95EXC. VAT

INC. VAT£35.94

£44.95EXC. VAT

INC. VAT£53.94

£26.95EXC. VAT

INC. VAT£32.34

£39.95EXC. VAT

INC. VAT£47.94

• Suitable for aluminium, steel and stainless steel rivets.

• Noise Power/Pressure: 80/71dB(A).• Operating Pressure: 90psi.• Supplied with riveting nozzles

and two spanners.• Trigger operated riveters

with hardened steel jaw assembly and rivet shaft safety cap.

• Composite handle insulates user from chill and vibration.

Air/Hydraulic Riveters

Model No. GSA312

Model No. GSA314

FREE TOOL KIT WORTH OVER £65

Model No.AB074BRList Price£22.25

Model No. AH2R/38List Price£11.45

Model No.ATO500SList Price£7.95

Mini In-Line AirTool Oilerwith Filler

200pc Black Anodised Rivet Assortment

Safety SpectaclesClear Lens

Air Tool CouplingKit

500ml AirTool Oil

Air LeaderHose withTailpiece

Model No.SSP66List Price£5.85

Model No.SA111List Price £9.15

Model No. ACX60List Price £9.75

Model No. Nozzle Sizes List Price Exc. VAT Inc. VAT

GSA312 3/32"(2.4mm), 1/8"(3.2mm), 5/32"(4mm), 3/16"(4.8mm) £179.95 £119.95 £143.94

GSA314 3/32"(2.4mm), 1/8"(3.2mm), 5/32"(4mm), 3/16"(4.8mm), 1/4"(6.4mm) £239.95 £159.95 £191.94

Sanding Belts

Model No.List


SA35/B40G £9.15 £6.45 £7.74

SA35/B60G £9.15 £6.45 £7.74

SA35/B80G £9.15 £6.45 £7.74

SA35/B100G £9.15 £6.45 £7.74

SA35/B120G £9.15 £6.45 £7.74

Power Tools & Riveters

Visit www.sealey.co.uk for our full range of Air Saw Blades

Ø75 x 2mm Cutting Disc 10mm Bore Pack of 5

• Model No. PTC/3C5• List Price £5.40

£3.95EXC. VAT

INC. VAT£4.74


sealey tools®

• Two large and six medium drawers, two of which are supplied with dividers, all secured behind a lockable front panel.

• A hinged top lid reveals a large storage area.

• Green felt interior to help protect tools.

• Pull knob, easy slide drawers for quick and easy access.

• Lockable lid features three catches that add extra strength when toolbox is picked up by the handle.

•• Supplied with two keys per lock.• Model No. AP1608W• List Price £133.95

8 Drawer Machinist Toolbox

• Heat treated Chrome Molybdenum and Chrome Vanadium steel construction with a smooth

• Deeply serrated and hardened teeth grip the workpiece from any angle.• Curved jaw design applies maximum pressure to all four corners of nut or bolt heads making it

ideal for high torque applications.• Feature one hand, no-pinch, quick release grip which provides comfort and control, reducing

hand fatigue and are much easier to use than traditional style locking pliers.•• Jaw Capacity/Length: Curved Jaw - 30/140, 45/220mm,

Long Nose - 60/210mm.• Supplied in tool roll.• Lifetime guarantee*.• Model No. AK6863B• List Price £61.95

3pc Quick Release Locking Pliers Set - Black Series

£99.95EXC. VAT

INC. VAT£119.94

£17.95EXC. VAT

INC. VAT£21.54

£9.95EXC. VAT

INC. VAT£11.94

£39.95EXC. VAT

INC. VAT£47.94

Model No. LengthOverall Size (W x D x H)


AP1210 1.2m 1210 x 610 x 900mm £96.95 £69.95 £83.94

AP1535 1.53m 1535 x 620 x 920mm £144.95 £94.95 £113.94

Model No. DrawersOverall Size (W x D x H)


APDC39HV 39 380 x 160 x 475mm £36.45 £27.95 £33.54

APDC60HV 60 380 x 160 x 475mm £39.95 £28.95 £34.74

• 9L Professional ultrasonic cleaner that can be used by garages, jewellers, dentists and hobbyists.

• Degas function to improve the cleaning process.

• Timer setting, fully adjustable from 1 – 99 minutes.

• Flexible 0 – 80°C temperature control.

• Clear LED display.• Memory function.• Easy to clean stainless

steel tank, mesh basket and drainage tap.

• Model No. SCT09• List Price £449.95

9L Ultrasonic Parts Cleaning Tank

£299.95EXC. VAT

INC. VAT£359.94

• Fully painted steel frame with wooden worktop and shelf.

• No nuts and bolts, means no tools required to assemble.

• Workbench clips together in minutes.

Steel Workbenches with Wooden Top

• Tough and durable housing with impact resistant composite drawers.••

Cabinet Boxes - Hi-Vis Green/Black

• Jig and clamp dowelling set ideal for making accurate 6, 8 and 10mm dowel holes/joints in MDF and wood.

• Suitable for a number of

joint including edge-to-edge, edge-to-corner and edge-to-surface.

• Contents: Dowelling Jig, Alignment Clamps, Dowel Pins; 6, 8, 10mm (20 of each), Drill Bit Depth Stops; 6, 8, 10mm.

• Model No. DJ01• List Price £29.95

• Pivot type blade tension device - no tools needed to change blade.

• Twin blade positions (45° and 90°) for comfortable and accurate cutting.

• Supplied with quality bi-metal hacksaw blade.


Universal Dowelling Jig Set

300mm Professional Hacksaw

Model No. AP1210

Model No. APDC39HV Model No.

APDC60HV


sealey tools

S A V E U P T O

O F F L I S T£50

S A V E

O F F L I S T£150

®


Our Premier Platinum Tool Trays are designed to fit full width drawers on our range of APSTACK Tool Chests. For our full

range of Tool Trays, visit www.sealey.co.uk.

YOUR LOCAL STOCKISTContact us for your

FREE Catalogue

Alternatively, view and download catalogue and

promotion PDFs directly from our

website!

Call +44 (0)1284 757500Email [email protected] www.sealey.co.ukPost Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

Connect with us on social media:

Promotion valid from:1st June 2020 until31st August 2020

Reference Code: ENG20

Offers will be withdrawn when stock is sold. Prices exclude VAT unless otherwise stated. We reserve the right to change products and pricing at any time.

may change without notice and do not form any part of a sale contract, E & OE.

*Please refer to www.sealey.co.uk/guarantee for more information on guarantees.

sealey tools

• Contents: Stubby Combination; 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm, Extra Long Ring; 8 x 10,11 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 21, 22 x 24mm, Ratchet Combination; 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm, Flare Nut; 9 x 11, 10 x 12, 13 x 14, 15 x 17, 19 x 21mm, 3/8"Drive Crows Foot; 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm.

• Tray Size (W x D x H): 530 x 397 x 55mm.

• Model No. TBTP11• List Price £459.95

44pc Specialised Spanner Set with Tool Tray

• Comprehensive range of Premier Platinum tool trays from Sealey.

• Suitable for AP24 Series and selected Superline PRO® Series Tool Chests.• The tools have been carefully selected for the professional technician from our Premier

Line range.• Contents: 1lb Ball Pein Hammer, 2lb Dead Blow Hammer, 300mm Professional

Adjustable Hacksaw Blade, 11 x 460mm Pry bar, Retracting Knife with ‘Pressure’ Blade Change, Sheathed Parallel Pin Punch Set (x7); Ø2-Ø8mm, 190mm Universal Shears.

• Tray Size (W x D x H): 530 x 397 x 55mm.• Model No. TBTP06UK• List Price £219.95

13pc Hacksaw, Hammers & Punch Kit with Tool Tray

See our Storage & Workstations promotion for more deals.

£129.95EXC. VAT

INC. VAT£155.94

£299.95EXC. VAT

INC. VAT£359.94

£599.95EXC. VAT

INC. VAT£719.94

14 Drawer Tool Chest Combinations• 5 Drawer Topchest.• Overall Size (W x D x H): 660 x 435 x 490mm.

• 2 Drawer Mid-Box.• Overall Size (W x D x H): 670 x 440 x 210mm.

• 7 Drawer Rollcab.• Overall Size (W x D x H): 685 x 465 x 1005mm.

Model No. APSTACKTCModel No. APSTACKTB Model No. APSTACKTOModel No. APSTACKTR

• List Price £1,014.85OURBIGGEST EVER STORAGE PROMOTION!

w w w . s e a l e y . c o . u k

OVER 300 PRODUCTSINSIDE WITH DISCOUNTS OF UP TO XX%

S A V E U P T O

O F F L I S T£414.90

S A V E

O F F L I S T£90

S A V E

O F F L I S T£160

2020 promotion...travel overall height motor power list price exc. vat inc. vat gdm50b 16mm 5 127mm...

Documents