207_hdmi fiber optic extender manual

8/7/2019 207_HDMI FIBER OPTIC EXTENDER MANUAL

1/3

SmartVM HDMI Extension System Users Guide v1.1

1

Users Guide

HDML-Axxx

Optical HDMI Extender

WARNING

- Do not dismantle the housing or modify the product.Dismantling the housing or modifying the product may result in electricalshock or burn.

- Refer all servicing to qualified service personnel.Do not attempt to service this product yourself as opening or removinghousing may expose you to dangerous v oltage or other hazards.

- Keep the product away from liquids.Spilling into the housing may result in fire, electrical shock, or equipmentdamage. If an object or liquid falls/spills into the housing, unplug theproduct immediately. Have the product checked by a qualified serviceengineer before using it again.

- Do not touch the Product with wet hands.Touching the housing and plug with wet hands is dangerous and can

cause electrical shock.- Do not pull out the cable by the power over maximum allowable

tensile load or bend excessively over bending radius.By the over pull-out strength or excessive bending, the optical performanceof HDM cable can be deteriorated. Please comply with the specification.

DescriptionSMARTVMs HDML-Axxx extender receive electrical HDMI(High DefinitionMultimedia Interface) signal from DVDP, Set-top box or other videoequipment to convert it to optical signal in order to transmit it long away

without any signal degradation. Finally, by the optical signal beingconverted to electrical HDMI signal, original signal from video source canbe transferred without any noise to display like HDTV, PDP and projector,.etc.

Featuresl High speed and long distance transmission by Optical cable(LC-type

SmartVM23900 Mercantile Rd. Cleveland OH 44122Toll Free # 866-999-3210 Tel # 216-765-1122 Fax # 216-765-0548E-mail : [email protected] Website : www.smartvm.com Ver 1.0
http://www.smartvm.com/http://www.smartvm.com/


2/3


2

multimode 4-ch fiber) up to 100 meter(330 ft)l Compatible with HDMI 1.3 Standardl Support HDCP compliant devicel Support maximum 1080p for HDTV and UXGA(1600x1200) resolutionl DDC and CEC signal line is transmitted by copper line(CAT5)

between internal and external power.

Package ContentsBefore you start installing HDML series, please check the packagecontents.l HDML (Transmitter and receiver)l Power Adapter (+5VDC ,1.2A) : 1 eal Copper male to male HDMI cable (0.5 meter length) : 2 eal Users Guide

Installation1. Power off display source such as DVDP, Set-top box and display.

2. Connect the enclosed copper HDMI cables into each display sourceand display.

3. Connect copper HDMI cable attached to display source intotransmitter side

4. Connect HDML(Transmitter) to the HDMI cable(source) andHDML(Receiver) to the HDMI cable(display).

5. Connect the optical cable(4ch-LC standard connector) betweentransmitter and receiver by order no1,2,3,4.

6. Connect the UTP cable( RJ45 connector) for DDC

7. Power on the source and display.(check the LED light on of transmitter and receiver)

8. Even if it doesnt work, power for the activation of optical HDML canbe insufficient. In this case, please insert enclosed external power adaptor into transmitter of HMDL.

9.

Note 1 SmartVM s optical HDML extender has backward compatibility

with DVI standard 1.0. If you want to use our HDML with display or display source with only DVI connector, you can use it with copper DVI to HDMI cable. In this case, however, audio signal can not be delivered.Note 2. Please use the standard multimode glass optical fiber and LCconnector for system working.

Connector Pin Assignment

HDMI Type A Receptacle HDMI Type A Plug

Optical Cable

DVDP or Set-top Box

Digital TV or Projector

CopperHDMI Cable

UTP cable


3/3


3

Pin Signal Pin Signal

1 TMDS Data 2+ 2 TMDS Data2 Shield

3 TMDS Data 2- 4 TMDS Data 1+

5 TMDS Data 1 Shield 6 TMDS Data 1-7 TMDS Data 0+ 8 TMDS Data0 Shield

9 TMDS Data 0- 10 TMDS Clock+

11 TMDS Clock Shield 12 TMDS Clock-

13 CEC 14 Reserved (N.C. on device)

15 SCL 16 SDA

17 DDC/CEC Ground 18 +5V Power

19 Hot Plug Detect

Trouble ShootingHDMI signals run a very high frequency and are especially susceptible tobad video connections, too many adapters, or too long cables. To avoidthe loss of an image or image jitter, follow these guidelines:

l Do not use the copper HDMI cable different from enclosed cable.HDMI signal can be worse by the cable.

l Use only cable designed for HDMI signalsl Limit or avoid the use of adapters

Specification Video

Video Bandwidth165MHz(VGA~UXGA, 1080p), Single Link Pixel data bit depth..24 bits

Video InputInput Signal ...1 Single Link HDMIConnector..1 HDMI Type A receptacle connectorMaximum Resolution..WUXGA(1920x1200) @ 60Hz, 1080pMinimum Input Voltage..0.15V p-p

Video OutputOutput Signal.. 1 Single Link HDMIConnectors.1 HDMI Type A receptacle connectorMaximum cable length...100 meters(330 feet)Minimum output voltage....0.6V p-p

GeneralPower.internal or External 5V 1.2A DCPower ConsumptionTransmitter 0.55 watt

Receiver 0.55 wattOperating temperature range0 to 50 Storage temperature range-20 to 70

DimensionsTransmitter /Receiver Module .....61x 55x 25 (mm)Module part(Transmitter & Receiver) .. 0.12 Kg/each

Warranty1 years parts and labor

Note Specifications are subject to change without notice.

207_hdmi fiber optic extender manual

Documents