180

Space Tower: High & Stable

If particularly high vertical building parts like piers or columns have to be built, MEVA‘s shor-ing tower Space offers a safe and cost-effective alternative to conventional shoring systems. The tower units have a square footprint of 480 cm, which makes the shoring tower very stable at any height. The units are pre-assembled and bolted together at ground level. The tower is built from 300 cm high units which can be extended by 50 cm and 100 cm extension units.

The shoring tower Space provides the nec-essary formwork bracing with just a few standard parts and, at the same time, serves as working platform for rebar or concreting works even in heights above 35 m.

The shoring tower is assembled from a basic unit (480 cm square and 300 cm high). The platform takes the complete formwork load and needs no additional braces or props.

SpaceShoring Tower

FEATURES BENEFITS

Co

nfi

gu

rati

on

Modular design for vertical buildings of virtually any required height even far above 35 m

Safe solution Flying of preassembled units for a fast height adjustment

Assembly with commercially available planking with access hatches

Costeffective, safe and efficient solution

Des

ign

Square basic dimension of 480 cm Sufficient working space to store material and tools

Height: Basic units of 300 cm and extension units of 50 cm and 100 cm

Cost-saving transport, easy assembly, few components Accessible inbetween platforms

Alignment and bracing of the formwork against the shoring tower Space

No additional bracing of the formwork from the bottom required, fast alignment of the formwork from inbetween platforms

Wind loads can be transferred into the shoring tower No expensive additional securing of the building parts required No interfering wind bracing on the platform

Features and Benefits at a Glance