22.09.2003 pasi korkeakoski 1 piling codes in finland design code for driven piles (lpo) lpo-87...
TRANSCRIPT
22.09.2003
Pasi Korkeakoski
1
Piling Codes in FinlandDesign Code for Driven Piles (LPO)•LPO-87 (wooden, concrete, steel)•Updating started 2002, ready 2004•New version will only deal with precast concrete and wooden piles
Design Code for High Capacity Piles •SPO-2001 (RIL 212-2001)•D>300 mm and capacity >1,5 MN•Bored, steel pipe, Vibrex-, Franki- and "onion" piles
Design Code for Steel Micropiles •Code not available•Steel piles 60 mm<D<300 mm•RR, RD-, RS-, CSG and jacked piles•Titan- ja Mai-piles
Drilled steel piles (TIEH 2000002-01)
Handbook for RR-piling
Design and execution of CSG-piles
Instructions for jacked piles (draft)
Steel Pipe Piles in Railway Bridges (VR)
The new codes would cover the most commonly used pile types in Finland (excluding CFA and D>300 mm RD)
Steel pipe piles (TIEL 2173448E-99)
SFS-EN 1536 Bored Piles prEN 14199 Micro Piles
SFS-EN 12699 Displacement Piles
prEN 12794 Precast Concrete Piles
22.09.2003
Pasi Korkeakoski
3
Instructions for Drilled PilingDesign and execution guide
Table of contents1 Piles Covered By Instructions Andrequirements Of Piling Site
2 Status Of Instructions
3 Definition
4 Required Piling Documentation
5 Ground Investigations
6 Pile Materials And Reinforcements
7 Design
8 Piling Work
9 Quality Control And Measurements
10 Documentation Of The Piling Work
11 Labour Protection And Environmental Control
22.09.2003
Pasi Korkeakoski
4
Instructions for Drilled PilingDesign and execution guide
7 DESIGN7.1 General
7.2 Tasks Included in the Design
7.3 Limit States and Dimensioning Mechanisms to Be Considered
7.4 Geotechnical Design of Piles
7.5. Structural Design
7.6 Position of Piles
7.7 Drilling of Piles
7.8 Reinforcement
22.09.2003
Pasi Korkeakoski
5
Micro Piling Instructions in Sweden
prEN 14199 Micro Piles
Stålkärnepålar - Pålkommissionen Rapport 97
Steel Core Piles, Instructions for desing, execution and monitoring
Injekterade pålar - Pålkommissionen
Injected piles, draft of Instructions for desing, execution and monitoring