LITTLE DAVID® DELIVERS HIGH-PERFORMANCE PACKAGING EQUIPMENT.

PERFORMANCE & DESIGN FEATURES:

Simplifi ed Control Panel with User

Friendly Touch Screen

Easy-Read Vacuum and Pressure Gauges

Isolated Rewind Shut-Off: Allows users to remove used backing material without powering down the unit

Simplifi ed Set-Up: From pallet to production in less than 10 minutes

Robust Industrial Design

UL Listed Controls

www.loveshaw.com

LITTLE DAVID

Continuing the tradition of functional labeling for the real world, Loveshaw is proud to release The Little David® LX-800RT.

This easy to use LX-800RT is designed for single tamp, random box height applications. Accurately position a 4”X 6” label at speeds of 22 cases per minute*. The LX-800RT maximizes throughput when processing cases of varying height.

LABELER

LX-800RTHIGH SPEED LABEL SOLUTION FOR THE REAL WORLD

*Box height within a 12” range

LX-800RTLITTLE DAVID

Printed in America

© 2014 LOVESHAW

LOVESHAW

2206 East TurnpikeP.O. Box 83, South Canaan, PA 18459Tel: (570) 937-4921 Fax: (570) 937-3229Toll Free: (800) 572-3434

LOVESHAW Europe

Unit 1 Newton ParkWest Portway Industrial EstateAndover, Hampshire, England SP10 3SLTel: (1264) 357511 Fax: (1264) 355963

DISTRIBUTED BY:

www.youtube.com/loveshaw

http://twitter.com/loveshaw

Features:• Simplifi ed Control Interface•

whole system• Cast Aluminum Frame- Stronger with fewer individual parts• Increased Width- Frame capable of running max. and min. width of all OEM printers

• Accurately places label to same area regardless of box height.

• Mounting Stand can turn machine to any angle or position

Printer/Applicator Data:Standard Printer: Sato S84 or SE Series (Zebra Available)Printing Label Speed: Up to 16” per secondAccuracy: +/- 1/4” (+/- 6.35mm) with constant product delivery

Label Sensing: Photoelectric (printer)Print Resolution: 203 dpi, 305 dpi, and 609 dpiPrinting Method: Thermal transfer printer (direct thermal available)Communication Interface: RS232C (optional interfaces available)Bar Code Symbology: UPC-A, UPC-F, EAN-8, Code 39, Code 128 Interleaved 2/5, UCC/EAN 128, Postnet, 2D and many others.

Label Specifi cations: *Exact dimensions dependant on printer selectedLabel Dimensions: (Sato and Zebra specs. below)• Width: .75“ - 6.6” (19.05mm- 167.64mm)• Length: 1” to 12”(25.4mm - 304.8mm) - in excess of 12” is available

Label Roll Requirements:• Finish: Pressure sensitive die cut with 1/8“ (3.17mm) gap• Outside Diameter: 11-7/8” (301.6mm)• gnol )mm 4.251( “6 revo slebal rof )mm6.101( ”4 lanoitpO ,)mm2.67( “ 3 :retemaiD eroC • Outside Wound

Simplifi ed Touch Screen Interface:Allows user to upload labels without bringing laptop onto the production fl oor• Rugged Design• Industrial Grade Hardware• Off the Shelf, Allen Bradley Components

Available Options:• Low label sensor with 3 color light pole• Incoming Air Dryer• Cleanable Vacuum Filters• Hand-held Print Pad• Spare Parts Kit

Included Mounting Stand• s dengisedeR tand allows machine to

be turned to any angle or position.• Utilizes total-lock casters

2206 Easton Turnpike

South Canaan, PA 18459Tel: (800) 572-3434 Fax: (570) 937-3229 www.loveshaw.com

LX-80Features: Simplified Control Interface Isolated Rewind Shut Off- Disengage rewind for label threading without powering down the whole system Cast Alumimum Frame- Stronger with fewer individual parts Increased Width- Frame capable of running max. and min. width of all OEM printers Customizable Applicator Pads ( 4” x 6” Grid and Chamber,Standard) Smart Tamp with Air Assist Stainless Steel Blow Tube Mounting Stand can turn machine to any angle or position

P.O Box 83

Top-Apply

Included Mounting Stand Redesigned stand allows machine

to be turned to any angle or position.

Utilizes total-lock casters

Side-ApplySide-Apply Top-Apply

Machine Specifications:

2206 Easton Turnpike

South Canaan, PA 18459Tel: (800) 572-3434 Fax: (570) 937-3229 www.loveshaw.com

A Division of ITW Ltd.

Unit 9 Brunel Gate,West Portway Industrial EstateAndover, HampshTel: (1264) 357511 Fax: (1264) 355964

LX-80Features: Simplified Control Interface Isolated Rewind Shut Off- Disengage rewind for label threading without powering down the whole system Cast Alumimum Frame- Stronger with fewer individual parts Increased Width- Frame capable of running max. and min. width of all OEM printers Customizable Applicator Pads ( 4” x 6” Grid and Chamber,Standard) Smart Tamp with Air Assist Stainless Steel Blow Tube Mounting Stand can turn machine to any angle or position

P.O Box 83

Top-Apply

Included Mounting Stand Redesigned stand allows machine

to be turned to any angle or position.

Utilizes total-lock casters

Side-ApplySide-Apply Top-Apply

Machine Specifications:

2206 Easton Turnpike

South Canaan, PA 18459Tel: (800) 572-3434 Fax: (570) 937-3229 www.loveshaw.com

A Division of ITW Ltd.

Unit 9 Brunel Gate,West Portway Industrial EstateAndover, Hampshire E ngland S P 10 3 S LTel: (1264) 357511 Fax: (1264) 355964 ©Loveshaw, an ITW Company, 2008

Printer/Applicator Data:

Standard Printer: Sato LT408Printing Label Speed: Up to 6” per secondAccuracy: +/- 1/32” (+/- .79mm) with constant product deliveryProduct Sensing: Photoelectric (diffused proximity)Label Sensing: PhotoelectricPrint Resolution: 203 dpi (8 dots/mm)Printing Method: Thermal tranfer printer (direct thermal available)Communication Interface: RS232C (optional interfaces available)Bar Code Symbology: UPC-A, UPC-F, EAN-8, Code 39, Code 128 Interleaved 2/5, UCC/EAN 128, Postnet, 2D and many others.

Label Specifications:Label Dimensions: (Sato LT408 specs. below)

Width: 4.1“ (105mm) Length: 1” to 6”(25.4mm - 150mm) - in excess of 6” is available Label Roll Requirments:

Finish: Pressure sensitive die cut with 1/8“ (3.17mm) gap Outside Diameter: 11-7/8” (301.6mm) Core Diameter: 3 “ (76.2mm) Optional 4” (101.6mm) for labels over 6“

(152.4 mm) long Outside Wound

Available Options: Low label sensor with 3 color light pole Incoming Air Dryer Cleanable Vacuum Filters 4” x 4” Grids and Chambers Hand-held Print Pad Spare Parts Kit

LX-80Features: Simplified Control Interface Isolated Rewind Shut Off- Disengage rewind for label threading without powering down the whole system Cast Alumimum Frame- Stronger with fewer individual parts Increased Width- Frame capable of running max. and min. width of all OEM printers Customizable Applicator Pads ( 4” x 6” Grid and Chamber,Standard) Smart Tamp with Air Assist Stainless Steel Blow Tube Mounting Stand can turn machine to any angle or position

Distributor Information:

P.O Box 83

Top-Apply

Included Mounting Stand Redesigned stand allows machine

to be turned to any angle or position.

Utilizes total-lock casters

Side-Apply

Optional G55 Print Pad:Allows user to upload labels without bringing laptop onto the production floor

Rugged Design Industrial Grade Hardware 2 Mbyts Flash Memory and 16 Mbyts RAM

Side-Apply Top-Apply

Machine Specifications:

Top Apply (typical application)

Side Apply

MACHINE SPECIFICATIONS

2206 Easton Turnpike

South Canaan, PA 18459Tel: (800) 572-3434 Fax: (570) 937-3229 www.loveshaw.com

A Division of ITW Ltd.

Unit 9 Brunel Gate,West Portway Industrial EstateAndover, Hampshire England SP 10 3 SLTel: (1264) 357511 Fax: (1264) 355964 ©Loveshaw, an ITW Company, 2010

Printer/Applicator Data:

Standard Printer: Sato S84 or SE Series (Zebra Available)Printing Label Speed: Up to 16” per secondAccuracy: +/- 1/32” (+/- .79mm) with constant product deliveryProduct Sensing: Photoelectric (diffused proximity)Label Sensing: Photoelectric(printer)Print Resolution: 203 dpi, 305 dpi, and 609 dpiPrinting Method: Thermal transfer printer (direct thermal available)Communication Interface: RS232C (optional interfaces available)Bar Code Symbology: UPC-A, UPC-F, EAN-8, Code 39, Code 128 Interleaved 2/5, UCC/EAN 128, Postnet, 2D and many others.

Label Specifications:*Exact dimensions dependant on printer selectedLabel Dimensions: (Sato and Zebra specs. below)

Width: .75“ - 6.6” (19.05mm- 167.64mm) Length: 1” to 12”(25.4mm - 304.8mm) - in excess of 12” is available Label Roll Requirements:

Finish: Pressure sensitive die cut with 1/8“ (3.17mm) gap Outside Diameter: 11-7/8” (301.6mm) Core Diameter: 3 “ (76.2mm) Optional 4” (101.6mm) for labels over 6“

(152.4 mm) long Outside Wound

Available Options: Low label sensor with 3 color light pole Incoming Air Dryer Cleanable Vacuum Filters Hand-held Print Pad Spare Parts Kit

LX-800DTFeatures: Simplified Control Interface Isolated Rewind Shut Off- Disengage rewind for backing removal without powering down the whole system Cast Aluminum Frame- Stronger with fewer individual parts Increased Width- Frame capable of running max. and min. width of all OEM printers Customizable Applicator Pads ( Single/Double/CW Labeling) Easily changes from single tamp, to dual tamp, to corner wrap Mounting Stand can turn machine to any angle or position

Distributor Information:

P.O Box 83

Included Mounting Stand Redesigned stand allows machine

to be turned to any angle or position.

Utilizes total-lock casters

Simplified Touch Screen Interface:Allows user to upload labels without bringing laptop onto the production floor

Rugged Design Industrial Grade Hardware Off the Shelf, Allen Bradley Components

Machine Specifications: Side-Apply

Top-Apply

2206 Easton Turnpike

South Canaan, PA 18459Tel: (800) 572-3434 Fax: (570) 937-3229 www.loveshaw.com

A Division of ITW Ltd.

Unit 9 Brunel Gate,West Portway Industrial EstateAndover, Hampshire England SP 10 3 SLTel: (1264) 357511 Fax: (1264) 355964 ©Loveshaw, an ITW Company, 2010

Printer/Applicator Data:

Standard Printer: Sato S84 or SE Series (Zebra Available)Printing Label Speed: Up to 16” per secondAccuracy: +/- 1/32” (+/- .79mm) with constant product deliveryProduct Sensing: Photoelectric (diffused proximity)Label Sensing: Photoelectric(printer)Print Resolution: 203 dpi, 305 dpi, and 609 dpiPrinting Method: Thermal transfer printer (direct thermal available)Communication Interface: RS232C (optional interfaces available)Bar Code Symbology: UPC-A, UPC-F, EAN-8, Code 39, Code 128 Interleaved 2/5, UCC/EAN 128, Postnet, 2D and many others.

Label Specifications:*Exact dimensions dependant on printer selectedLabel Dimensions: (Sato and Zebra specs. below)

Width: .75“ - 6.6” (19.05mm- 167.64mm) Length: 1” to 12”(25.4mm - 304.8mm) - in excess of 12” is available Label Roll Requirements:

Finish: Pressure sensitive die cut with 1/8“ (3.17mm) gap Outside Diameter: 11-7/8” (301.6mm) Core Diameter: 3 “ (76.2mm) Optional 4” (101.6mm) for labels over 6“

(152.4 mm) long Outside Wound

Available Options: Low label sensor with 3 color light pole Incoming Air Dryer Cleanable Vacuum Filters Hand-held Print Pad Spare Parts Kit

LX-800DTFeatures: Simplified Control Interface Isolated Rewind Shut Off- Disengage rewind for backing removal without powering down the whole system Cast Aluminum Frame- Stronger with fewer individual parts Increased Width- Frame capable of running max. and min. width of all OEM printers Customizable Applicator Pads ( Single/Double/CW Labeling) Easily changes from single tamp, to dual tamp, to corner wrap Mounting Stand can turn machine to any angle or position

Distributor Information:

P.O Box 83

Included Mounting Stand Redesigned stand allows machine

to be turned to any angle or position.

Utilizes total-lock casters

Simplified Touch Screen Interface:Allows user to upload labels without bringing laptop onto the production floor

Rugged Design Industrial Grade Hardware Off the Shelf, Allen Bradley Components

Machine Specifications: Side-Apply

Top-Apply