230lc+27 230lc+270lc.pdf0lc

8/10/2019 230LC+27 230LC+270LC.pdf0LC

http://slidepdf.com/reader/full/230lc27-230lc270lcpdf0lc 1/7

ENGINE 230LC 270LC

Type...................................................................................John Deere 6068H with turbocharger and charged John Deere 6068H with turbocharger and chargedair cooling air cooling

Rated power.......................................................................170 SAE net hp (127 kW) @ 2,100 rpm 180 SAE net hp (134 kW) @ 2,150 rpmCylinders ...........................................................................6 6Displacement.....................................................................414 cu. in. (6.8 L) 414 cu. in. (6.8 L)Maximum net torque... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ... .. .. .. .. ..528 lb.-ft . (716 Nm) @ 1,400 rpm 542 lb.-ft . (736 Nm) @ 1,400 rpmFuel consumption, typical. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ... .. .. .. .. ..5.0 to 7.5 gal. /hr. (19 to 28 L/h) 5.5 to 8.5 gal./hr. (19 to 30 L/h)Cooling fan........................................................................suction-type drive suction-type drive

Electrical system.... .. .. .. ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ... .. .. ..24 volt with 45-amp alternator 24 volt with 45-amp alternatorBatteries (two 12 volt) . ......................................................reserve capacity: 180 min. reserve capacity: 180 min.HYDRAULIC SYSTEM

Main pumps ......................................................................2 variable-displacement axial-piston closed center 2 variable-displacement axial-piston open centerMaximum flow............................................................2 x 54 gpm (2 x 204 L/min.) 2 x 55 gpm (2 x 208 L/min.)Minimum flow............................................................2 x 21 gpm (2 x 80 L/min.) 2 x 23 gpm (2 x 87 L/min.)

Pilot pump.........................................................................one gear one gearMaximum rated flow. .................................................9.0 gpm (7.5 L/min.) 9.0 gpm (7.5 L/min.)Pressure setting............................................................540 psi (3723 kPa) 540 psi (3723 kPa)

System operating pressureImplement circuits ......................................................4,980 psi (34 336 kPa) 4,980 psi (34 336 kPa)Travel circuits ..............................................................4,980 psi (34 336 kPa) 4,980 psi (34 336 kPa)Swing circuits ..............................................................4,550 psi (31 371 kPa) 4,010 psi (27 648 kPa)

Oil filtration ......................................................................one 10-micron full-flow return filter with by-pass one 10-micron full-flow return filter with by-passone pilot oil filter one pilot oil filterone suction filter one suction filter

CYLINDERS

Boom (2)Bore . ............................................................................4.9 in. (125 mm) 5.31 in. (135 mm)Rod diameter ...............................................................3.5 in. (90 mm) 3.74 in. (95 mm)Stroke...........................................................................53.15 in. (1350 mm) 52.76 in. (1340 mm)

Arm (1)Bore . ............................................................................5.3 in. (135 mm) 5.71 in. (145 mm)Rod diameter ...............................................................3.9 in. (100 mm) 3.9 in. (100 mm)Stroke...........................................................................63.58 in. (1615 mm) 61.22 in. (1555 mm)

Bucket (1)Bore . ............................................................................4.9 in. (125 mm) 5.31 in. (135 mm)Rod diameter ...............................................................3.3 in. (85 mm) 3.74 in. (95 mm)Stroke...........................................................................42.32 in. (1075 mm) 42.13 in. (1070 mm)

SWING MECHANISM

Swing speed .......................................................................0–13.5 rpm 0–10.6 rpmSwing torque .....................................................................49,915 lb.-ft. (6904 kg/m) 51,622 lb.-ft. (7140 kg/m)

UNDERCARRIAGE

Carrier rollers (per side).....................................................2 2Track rollers (per side) .......................................................9 9Idlers (per side) ..................................................................1 1Shoes, triple semigrouser (per side)...................................51 50Track guides.......................................................................front and center front and centerTrack adjustment...............................................................hydraulic hydraulicTravel speed

Low..............................................................................0–2.2 mph (0–3.6 km/h) 0–1.9 mph (0–3.1 km/h)High .............................................................................0–3.4 mph (0–5.5 km/h) 0–3.2 mph (0–5.1 km/h)

Drawbar pull ......................................................................42,420 lb. (187 kN) 50,510 lb. (225 kN)GROUND PRESSURE DATA

Average ground pressure24-in. (600 mm) triple semigrouser shoes..................6.64 psi (45.8 kPa); for rocky terrain and stumps 6.13 psi (42.3 kPa); for rocky terrain and stumps28-in. (700 mm) triple semigrouser shoes ..................5.79 psi (39.9 kPa); for general/soft terrain32-in. (800 mm) triple semigrouser shoes..................5.13 psi (35.4 kPa); for extremely soft terrain 4.76 psi (32.8 kPa); for extremely soft terrain

CAPACITIES

Fuel tank ............................................................................82 gal. (310 L) 82 gal. (310 L)Cooling system..................................................................24 qt. (22 L) 24 qt. (22 L)Engine lubrication, including filter ..................................5 gal. (19 L) 5 gal. (19 L)Hydraulic system ...............................................................71 gal. (270 L) 71 gal. (270 L)Planetary propel drive (each) ............................................6.5 qt. (6 L) 6.5 qt. (6 L)Swing drive ........................................................................14 qt. (13 L) 14 qt. (13 L)Hydraulic tank...................................................................39 gal. (148 L) 39 gal. (148 L)

OPERATING WEIGHTS

With full fuel tank, 175-lb. (79 kg) operator,and 32-in. (800 mm) triple grouser shoesWith 42-in. (1065 mm) 1.38-cu. yd. (1.06 m 3)

bucket, 11-ft. 10-in. (3.61 m) arm, and11,265-lb. (5110 kg) counterweight......................52,410 lb. (23 773 kg)14

S P E C I F I C A T I O N S

8/10/2019 230LC+27 230LC+270LC.pdf0LC


OPERATING WEIGHTS(continued) 230LC 270LC

With 42-in. (1065 mm) 1.75-cu. yd. (1.34 m 3)bucket, 12-ft. 4-in. (3.75 m) arm, and12,590-lb. (5710 kg) counterweight .......................................................................................................................60,660 lb. (27 515 kg)

COMPONENT WEIGHTS

Upperstructure with full fuel tank (less frontattachments)Less boom lift cylinders (2) and 11,265-lb.

(5110 kg) counterweight.......................................11,760 lb. (5334 kg)Less boom lift cylinders (2) and 12,590-lb.

(5710 kg) counterweight ........................................................................................................................................11,870 lb. (5384 kg)Undercarriage equipped with

24-in. (600 mm) triple grouser shoes..........................17,520 lb. (7947 kg) 22,590 lb. (10 245 kg)28-in. (700 mm) triple grouser shoes..........................18,465 lb. (8376 kg)32-in. (800 mm) triple grouser shoes..........................19,100 lb. (8664 kg) 24,640 lb. (11 176 kg)

One-piece boom (with arm cylinder)................................4,340 lb. (1969 kg) 5,060 lb. (2297 kg)Arm with bucket cylinder and linkage

7 ft. 7 in. (2.32 m) .......................................................2,600 lb. (1179 kg)9 ft. 9 in. (2.96 m) .......................................................2,740 lb. (1243 kg)11 ft. 10 in. (3.61 m) ...................................................3,025 lb. (1372 kg)10 ft. 1 in. (3.1 m).........................................................................................................................................................3,060 lb. (1388 kg)12 ft. 4 in. (3.75 m).......................................................................................................................................................3,240 lb. (1469 kg)

Counterweight ..................................................................11,265 lb. (5110 kg) 12,590 lb. (5710 kg)Boom lift cylinders (2) total weight ..................................960 lb. (435 kg) 1,120 lb. (508 kg)

Buckets42-in. (1065 mm) 1.38-cu. yd. (1.06 m 3)general purpose.....................................................1,785 lb. (810 kg)

42-in. (1065 mm) 1.75-cu. yd. (1.34 m 3)heavy duty ..............................................................................................................................................................1,966 lb. (892 kg)

230LC OPERATING INFORMATION

Arm Length Arm Length Arm Length7 ft . 7 in. (2.32 m) 9 ft. 9 in. (2.96 m) 11 ft. 10 in. (3.61 m)

Arm force with 42-in. (1065 mm)general-purpose bucket*................32,300 lb. (143 kN) 25,705 lb. (112 kN) 22,265 lb. (99 kN)

Bucket tangential force with 42-in.(1065 mm) 1.38-cu. yd. (1.06 m 3)general-purpose bucket*................34,820 lb. (155 kN) 34,820 lb. (155 kN) 34,820 lb. (155 kN)

Lifting capacity over front @ groundlevel 20-ft. (6.1 m) reach*..............18,320 lb. (8310 kg) 17,530 lb. (7950 kg) 16,490 lb. (7480 kg)

AMax. reach .....................................31 ft. 8 in. (9.60 m) 33 ft. 4 in. (10.16 m) 35 ft. 5 in. (10.79 m)A' Max. reach @ ground level ............14 ft. 7 in. (9.42 m) 32 ft. 9 in. (9.99 m) 34 ft. 10 in. (10.62 m)

B Max. digging depth .......................20 ft. 4 in. (6.19 m) 22 ft. 5 in. (6.84 m) 24 ft. 6 in. (7.48 m)B' Max. digging depth @ 8-ft.

(2.44 m) flat bottom......................19 ft. 7 in. (5.96 m) 21 ft. 9 in. (6.63 m) 24 ft. (7.32 m)C Max. cutting height.......................30 ft. 10 in. (9.41 m) 31 ft. 7 in. (9.63 m) 32 ft. 9 in. (9.99 m)D Max. dumping height....................21 ft. 5 in. (6.54 m) 22 ft. 2 in. (6.76 m) 23 ft. 4 in. (7.10 m)E Min. swing radius ..........................13 ft. (3.96 m) 12 ft. 8 in. (3.87 m) 12 ft. 9 in. (3.89 m)F Max. vertical wall...........................17 ft. 4 in. (5.29 m) 19 ft. 5 in. (5.91 m) 21 ft. 9 in. (6.63 m)G Tail swing radius............................9 ft. 8 in. (2.94 m) 9 ft. 8 in. (2.94 m) 9 ft. 8 in. (2.94 m)

*Maximum digging force with Power Boost.

270LC OPERATING INFORMATION

Arm Length Arm Length10 ft. 1 in. (3.1 m) 12 ft. 4 in. (3.75 m)

Arm force with 42-in. (1065 mm)

heavy-duty bucket*........................26,055 lb. (116 kN) 22,810 lb. (101 kN)Bucket tangential force with 42-in.

(1065 mm) 1.75-cu. yd. (1.34 m 3)heavy-duty bucket*........................37,470 lb. (167 kN) 37,470 lb. (167 kN)

Lifting capacity over front @ groundlevel 20-ft. (6.1 m) reach*..............20,620 lb. (9353 kg) 19,540 lb. (8863 kg)

A Max. reach .....................................35 ft. 2 in. (10.71 m) 37 ft. 1 in. (11.30 m)A' Max. reach @ ground level ............34 ft. 6 in. (10.52 m) 36 ft. 6 in. (11.12 m)B Max. digging depth .......................23 ft. 9 in. (7.23 m) 25 ft. 10 in. (7.88 m)B' Max. digging depth @ 8-ft.

(2.44 m) flat bottom ......................23 ft. 2 in. (7.05 m) 25 ft. 8 in. (7.72 m)C Max. cutting height.......................32 ft. 9 in. (9.98 m) 33 ft. 7 in. (10.24 m)D Max. dumping height....................23 ft. 2 in. (7.07 m) 24 ft. 1 in. (7.33 m)E Min. swing radius ..........................13 ft. 7 in. (4.14 m) 13 ft. 6 in. (4.12 m)F Max. vertical wall...........................20 ft. 1 in. (6.11 m) 22 ft. 3 in. (6.77 m)G Tail swing radius............................9 ft. 8 in. (2.94 m) 9 ft. 8 in. (2.94 m)

*Maximum digging force with Power Boost.

S P E C I F I C A

1

E

GROUND LINE

B

C D

F

G

C E N T E R L I N E O F S W I N G

B'

A'A

8/10/2019 230LC+27 230LC+270LC.pdf0LC


DIMENSIONS 230LC 270LCA With 7-ft. 7-in. (2.32 m) arm ......................................33 ft. 8 in. (10.26 m)

With 9-ft. 9-in. (2.96 m) arm ......................................33 ft. 3 in. (10.14 m)With 11-ft. 10-in. (3.61 m) arm ..................................33 ft. 6 in. (10.20 m)With 10-ft. 1-in. (3.10 m) arm......................................................................................................................................33 ft. 9 in. (10.29 m)With 12-ft. 4-in. (3.75 m) arm......................................................................................................................................33 ft. 10 in. (10.31 m)

B With 7-ft. 7-in. (2.32 m) arm ......................................10 ft. 10 in. (3.29 m)With 9-ft. 9-in. (2.96 m) arm ......................................10 ft. 2 in. (3.10 m)With 11-ft. 10-in. (3.61 m) arm ..................................10 ft. 11 in. (3.32 m)

With 10-ft. 1-in. (3.10 m) arm......................................................................................................................................10 ft. 5 in. (3.17 m)With 12-ft. 4-in. (3.75 m) arm......................................................................................................................................12 ft. (3.35 m)C With 24-in. (600 mm) shoes .......................................10 ft. 6 in. (3.19 m) 10 ft. 6 in. (3.19 m)

With 28-in. (700 mm) shoes.......................................10 ft. 10 in. (3.29 m)With 32-in. (800 mm) shoes .......................................11 ft. 1 in. (3.39 m) 11 ft. 1 in. (3.39 m)

270LC EXCAVATOR

230LC EXCAVATOR

D I M E N S I O N S / S P E C I F I C A T I O N S

16

9 ft. 5 in. (2.87 m)

8 ft. 6 in. (2.59 m)

1 ft. 6 in. (460 mm)

2 8 i n

. ( 7 0 0 m m

)

9 f t . 8 i n

. ( 2

. 9 4 m

)

B

15 ft. 3 in. (4.64 m)

12 ft. 7 in. (3.84 m)

3 f t . 7 i n

. ( 1 0 9 0 m m

)

9 ft. 8 in. (2.94 m)

C A

2 4 i n

. ( 6 0 0 m m

)

3 2 i n

. ( 8 0 0 m m

)

9 ft. 5 in. (2.87 m)

8 ft. 6 in. (2.59 m)

1 ft. 8 in. (500 mm)

3 2 i n

. ( 8 0 0 m m

)

9 f t . 1 1 i n

. ( 3

. 0 3 m

)

13 ft. 2 in. (4.01 m)

3

f t . 1 0 i n

. ( 1 1 6 0 m m

)

9 ft. 8 in. (2.94 m)

A

2 4 i n

. ( 6 0 0 m m

)

15 ft. 11 in. (4.86 m)C

B

230LC LIFT CAPACITIES Boldface italic type indicates hydraulic-limited capacities with Power Boost on; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook, machine equippedwith 1.38-cu. yd. (1.06 m 3) 42-in. (1065 mm) wide, 1,785-lb. (810 kg) bucket; and situated on f irm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do notexceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.Load Point 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m) 30 ft. (9.14 m)Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over SideWith 24-in. (600 mm) shoes and 7-ft. 7-in. (2.32 m) arm20 ft. (6.10 m) 10,492 (4721) 10,492 (4721)15 ft. (4.57 m) 11,770 (5297) 11,770 (5297) 10,974 (4938) 8,246 (3711)10 ft. (3.05 m) 14,133 (6360) 11,642 (5239) 11,920 (5364) 7,985 (3593)5 ft. (1.52 m) 16,639 (7488) 10,927 (4917) 12,253 (5514) 7,653 (3444)Ground Line 17,099 (7695) 10,454 (4704) 11,964 (5384) 7,390 (3326)–5 ft. (–1.52 m) 25,546 (11 496) 16,192 (7286) 16,903 (7606) 10,280 (4626) 11,841 (5328) 7,277 (3275)–10 ft. (–3.05 m) 22,547 (10 146) 22,547 (10 146) 23,661 (10 647) 16,437 (7397) 17,842 (8029) 10,365 (4664)–15 ft. (–4.57 m) 19,693 (8862) 16,960 (7632) 14,382 (6472) 10,785 (4853)

8/10/2019 230LC+27 230LC+270LC.pdf0LC


230LC LIFT CAPACITIES(continued) Boldface italic type indicates hydraulic-limited capacities with Power Boost on; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook, machine equippedwith 1.38-cu. yd. (1.06 m 3) 42-in. (1065 mm) wide, 1,785-lb. (810 kg) bucket; and situated on f irm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do notexceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.Load Point 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m) 30 ft. (9.14 m)Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over SideWith 24-in. (600 mm) shoes and 9-ft. 9-in. (2.96 m) arm20 ft. (6.10 m) 7,863 (3538) 7,863 (3538)15 ft. (4.57 m) 10,238 (4607) 10,238 (4607) 9,746 (4386) 8,384 (3773)10 ft. (3.05 m) 16,697 (7514) 16,697 (7514) 12,664 (5699) 11,794 (5307) 10,880 (4896) 8,042 (3619)5 ft. (1.52 m) 22,483 (10 117) 17,066 (7680) 15,402 (6931) 11,003 (4951) 12,296 (5533) 7,645 (3440) 8,789 (3955) 5,502 (2476Ground Line 25,492 (11 471) 16,188 (7285) 17,526 (7887) 10,416 (4687) 11,889 (5350) 7,312 (3290) 8,824 (3971) 5,350 (2408–5 ft. (–1.52 m) 12,015 (5407) 12,015 (5407) 25,928 (11 668) 15,974 (7188) 16,742 (7534) 10,126 (4557) 11,679 (5256) 7,120 (3204)–10 ft. (–3.05 m) 27,586 (12 414) 27,586 (12 414) 24,741 (11 133) 16,077 (7235) 16,712 (7520) 10,099 (4545) 11,677 (5255) 7,118 (3203)–15 ft. (–4.57 m) 29,580 (13 311) 29,580 (13 311) 21,733 (9780) 16,447 (7401) 16,128 (7258) 10,341 (4653)With 24-in. (600 mm) shoes and 11-ft. 10-in. (3.61 m) arm

20 ft. (6.10 m) 7,582 (3412) 7,582 (3412)15 ft. (4.57 m) 8,459 (3807) 8,459 (3807) 5,843 (2629) 5,843 (2629)10 ft. (3.05 m) 11,057 (4976) 11,057 (4976) 9,725 (4376) 8,100 (3645) 7,949 (3577) 5,677 (25555 ft. (1.52 m) 19,879 (8946) 17,561 (7902) 13,980 (6291) 11,138 (5012) 11,296 (5083) 7,651 (3443) 8,940 (4023) 5,452 (2453Ground Line 24,068 (10 831) 16,297 (7334) 16,488 (7420) 10,427 (4692) 11,843 (5329) 7,251 (3263) 8,713 (3921) 5,241 (2358)–5 ft. (–1.52 m) 12,178 (5480) 12,178 (5480) 25,630 (11 534) 15,806 (7113) 16 ,638 (7487) 10,009 (4504) 11,549 (5197) 6,982 (3142) 8,570 (3857) 5,108 (2299)–10 ft. (–3.05 m) 22,581 (10 161) 22,581 (10 161) 25,294 (11 382) 15,757 (7091) 16,484 (7418) 9,872 (4442) 11,447 (5151) 6,889 (3100)–15 ft. (–4.57 m) 33,188 (14 935) 33,188 (14 935) 23,210 (10 445) 16,009 (7204) 17,064 (7679) 9,994 (4497) 11,603 (5221) 7,032 (3164)–20 ft. (–6.10 m) 25,605 (11 522) 25,605 (11 522) 18,466 (8310) 16,611 (7475) 12,998 (5849) 10,482 (4717)With 28-in. (700 mm) shoes and 7-ft. 7-in. (2.32 m) arm20 ft. (6.10 m) 10,492 (4721) 10,492 (4721)

15 ft. (4.57 m) 11,770 (5297) 11,770 (5297) 10,974 (4938) 8,246 (3711)10 ft. (3.05 m) 14,133 (6360) 11,848 (5332) 11,920 (5364) 7,985 (3593)5 ft. (1.52 m) 16,639 (7488) 11,133 (5010) 13,155 (5920) 7,653 (3444)Ground Line 18,322 (8245) 10,660 (4797) 12,206 (5493) 7,390 (3326)–5 ft. (–1.52 m) 25,546 (11 496) 16,497 (7424) 17,233 (7755) 10,487 (4719) 12,083 (5437) 7,277 (3275)–10 ft. (–3.05 m) 22,547 (10 146) 22,547 (10 146) 23,661 (10 647) 16,742 (7534) 17,842 (8029) 10,572 (4757)–15 ft. (–4.57 m) 19,693 (8862) 17,265 (7769) 14,382 (6472) 10,991 (4946)With 28-in. (700 mm) shoes and 9-ft. 9-in. (2.96 m) arm

20 ft. (6.10 m) 7,863 (3538) 7,863 (3538)15 ft. (4.57 m) 10,238 (4607) 10,238 (4607) 9,746 (4386) 8,540 (3843)10 ft. (3.05 m) 16,697 (7514) 16,697 (7514) 12,664 (5699) 12,664 (5699) 10,880 (4896) 8,199 (3690)5 ft. (1.52 m) 22,483 (10 117) 17,371 (7817) 15,402 (6931) 11,210 (5045) 12,296 (5533) 7,801 (3510) 8,789 (3955) 5,627 (2532Ground Line 25,492 (11 471) 16,493 (7422) 17,526 (7887) 10,623 (4780) 12,131 (5459) 7,468 (3361) 8,824 (3971) 5,475 (2464–5 ft. (–1.52 m) 12,015 (5407) 12,015 (5407) 25,928 (11 668) 16,278 (7325) 17,072 (7682) 10,332 (4649) 11,921 (5364) 7,276 (3274)–10 ft. (–3.05 m) 27,586 (12 414) 27,586 (12 414) 24,741 (11 133) 16,382 (7372) 17,042 (7669) 10,305 (4637) 11,919 (5364) 7,274 (3273)–15 ft. (–4.57 m) 29,580 (13 311) 29,580 (13 311) 21,733 (9780) 16,752 (7538) 16,128 (7258) 10,547 (4746)With 28-in. (700 mm) shoes and 11-ft. 10-in. (3.61 m) arm

20 ft. (6.10 m) 7,582 (3412) 7,582 (3412)15 ft. (4.57 m) 8,459 (3807) 8,459 (3807) 5,843 (2629) 5,843 (2629)10 ft. (3.05 m) 11,057 (4976) 11,057 (4976) 9,725 (4376) 8,256 (3715) 7,949 (3577) 5,802 (26115 ft. (1.52 m) 19,879 (8946) 17,866 (8040) 13,980 (6291) 11,345 (5105) 11,296 (5083) 7,808 (3514) 9,582 (4312) 5,578 (2510Ground Line 24,068 (10 831) 16,602 (7471) 16,488 (7420) 10,633 (4785) 12,760 (5742) 7,407 (3333) 8,903 (4006) 5,366 (2415–5 ft. (–1.52 m) 12,178 (5480) 12,178 (5480) 25,630 (11 534) 16,111 (7250) 16,968 (7636) 10,215 (4597) 11,791 (5306) 7,139 (3213) 8,761 (3942) 5,234 (2355)–10 ft. (–3.05 m) 22,581 (10 161) 22,581 (10 161) 25,294 (11 382) 16,062 (7228) 16,814 (7566) 10,079 (4536) 11,689 (5260) 7,045 (3170)–15 ft. (–4.57 m) 33,188 (14 935) 33,188 (14 935) 23,210 (10 445) 16,314 (7341) 17,064 (7679) 10,200 (4590) 11,845 (5330) 7,188 (3235)–20 ft. (–6.10 m) 25,605 (11 522) 25,605 (11 522) 18,466 (8310) 16,916 (7612) 12,998 (5849) 10,688 (4810)With 32-in. (800 mm) shoes and 7-ft. 7-in. (2.32 m) arm20 ft. (6.10 m) 10,492 (4721) 10,492 (4721)15 ft. (4.57 m) 11,770 (5297) 11,770 (5297) 10,974 (4938) 8,506 (3828)10 ft. (3.05 m) 14,133 (6360) 11,986 (5394) 11,920 (5364) 8,246 (3711)5 ft. (1.52 m) 16,639 (7488) 11,271 (5072) 13,155 (5920) 7,914 (3561)Ground Line 18,322 (8245) 10,798 (4859) 12,368 (5566) 7,650 (3443)–5 ft. (–1.52 m) 25,546 (11 496) 16,701 (7515) 17,453 (7854) 10,625 (4781) 12,244 (5510) 7,537 (3392)–10 ft. (–3.05 m) 22,547 (10 146) 22,547 (10 146) 23,661 (10 647) 16,946 (7626) 17,842 (8029) 10,710 (4819)–15 ft. (–4.57 m) 19,693 (8862) 17,469 (7861) 14,382 (6472) 11,129 (5008)

With 32-in. (800 mm) shoes and 9-ft. 9-in. (2.96 m) arm20 ft. (6.10 m) 7,863 (3538) 7,863 (3538)15 ft. (4.57 m) 10,238 (4607) 10,238 (4607) 9,746 (4386) 8,645 (3890)10 ft. (3.05 m) 16,697 (7514) 16,697 (7514) 12,664 (5699) 12,664 (5699) 10,880 (4896) 8,303 (3736)5 ft. (1.52 m) 22,483 (10 117) 17,575 (7909) 15,402 (6931) 11,348 (5107) 12,296 (5533) 7,905 (3557) 8,789 (3955) 5,711 (2570Ground Line 25,492 (11 471) 16,696 (7513) 17,526 (7887) 10,761 (4842) 12,292 (5531) 7,572 (3407) 8,824 (3971) 5,559 (2502–5 ft. (–1.52 m) 12,015 (5407) 12,015 (5407) 25,928 (11 668) 16,482 (7417) 17,293 (7782) 10,470 (4712) 12,082 (5437) 7,380 (3321)–10 ft. (–3.05 m) 27,586 (12 414) 27,586 (12 414) 24,741 (11 133) 16,586 (7464) 18,218 (8198) 10,443 (4699) 12,081 (5436) 7,379 (3321)–15 ft. (–4.57 m) 29,580 (13 311) 29,580 (13 311) 21,733 (9780) 16,956 (7630) 16,128 (7258) 10,685 (4808)With 32-in. (800 mm) shoes and 11-ft. 10-in. (3.61 m) arm20 ft. (6.10 m) 7,582 (3412) 7,582 (3412)15 ft. (4.57 m) 8,459 (3807) 8,459 (3807) 5,843 (2629) 5,843 (2629)10 ft. (3.05 m) 11,057 (4976) 11,057 (4976) 9,725 (4376) 8,361 (3762) 7,949 (3577) 5,886 (26495 ft. (1.52 m) 19,879 (8946) 18,070 (8132) 13,980 (6291) 11,483 (5167) 11,296 (5083) 7,912 (3560) 9,582 (4312) 5,662 (2548Ground Line 24,068 (10 831) 16,806 (7563) 16,488 (7420) 10,771 (4847) 12,760 (5742) 7,511 (3380) 9,031 (4064) 5,450 (2453–5 ft. (–1.52 m) 12,178 (5480) 12,178 (5480) 25,630 (11 534) 16,315 (7342) 17,983 (8092) 10,353 (4659) 11,952 (5378) 7,243 (3259) 8,888 (4000) 5,318 (2393)–10 ft. (–3.05 m) 22,581 (10 161) 22,581 (10 161) 25,294 (11 382) 16,266 (7320) 17,034 (7665) 10,217 (4598) 11,850 (5333) 7,150 (3217)

–15 ft. (–4.57 m) 33,188 (14 935) 33,188 (4935) 23,210 (10 445) 16,517 (7433) 17,064 (7679) 10,338 (4652) 12,600 (5670) 7,292 (3281)–20 ft. (–6.10 m) 25,605 (11 522) 25,605 (11 522) 18,466 (8310) 17,120 (7704) 12,998 (5849) 10,826 (4872)

S P E C I F I C A

1

8/10/2019 230LC+27 230LC+270LC.pdf0LC


270LC LIFT CAPACITIES

Boldface italic type indicates hydraulic-limited capacities with Power Boost on; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook, machine equippedwith 1.75-cu. yd. (1.34 m 3) 42-in. (1065 mm) wide, 1,966-lb. (892 kg) bucket; and situated on f irm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do notexceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.

Load Point 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m) 30 ft. (9.14 m)Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side

With 24-in. (600 mm) shoes and 10-ft. 1-in. (3.10 m) arm20 ft. (6.10 m) 9,622 (4330) 9,622 (4330)15 ft. (4.57 m) 10,592 (4766) 9,719 (4374) 8,564 (3854) 6,803 (306110 ft. (3.05 m) 20,434 (9195) 20,434 (9195) 14,674 (6603) 13,421 (6039) 12,276 (5524) 9,240 (4158) 11,188 (5035) 6,603 (29715 ft. (1.52 m) 25,858 (11 636) 19,102 (8596) 18,130 (8159) 12,466 (5610) 14,163 (6373) 8,738 (3932) 11,501 (5175) 6,350 (2858)Ground Line 22,072 (9932) 18,378 (8270) 20,617 (9278) 11,827 (5322) 14,323 (6445) 8,345 (3755) 11,260 (5067) 6,141 (2763)–5 ft. (–1.52 m) 12,006 (5403) 12,006 (5403) 24,009 (10 804) 18,276 (8224) 20,233 (9105) 11,547 (5196) 14,085 (6338) 8,131 (3659) 11,153 (5019) 6,048 (2722)–10 ft. (–3.05 m) 23,108 (10 399) 23,108 (10 399) 28,900 (13 005) 18,454 (8304) 20,240 (9108) 11,553 (5199) 14,082 (6337) 8,127 (3657)–15 ft. (–4.57 m) 23,981 (10 791) 23,981 (10 791) 25,644 (11 540) 18,899 (8505) 19,306 (8688) 11,835 (5326)

With 24-in. (600 mm) shoes and 12-ft. 4-in. (3.75 m) arm20 ft. (6.10 m) 6,263 (2818) 6,263 (2818)15 ft. (4.57 m) 9,260 (4167) 9,260 (4167) 9,060 (4077) 6,938 (312210 ft. (3.05 m) 16,844 (7580) 16,844 (7580) 12,867 (5790) 12,867 (5790) 11,059 (4977) 9,402 (4231) 10,174 (4578) 6,682 (30075 ft. (1.52 m) 24,398 (10 979) 19,793 (8907) 16,575 (7459) 12,731 (5729) 13,119 (5904) 8,845 (3980) 11,328 (5098) 6,382 (2872Ground Line 28,839 (12 978) 18,556 (8350) 19,556 (8800) 11,940 (5373) 14,962 (6733) 8,376 (3769) 10,638 (4787) 6,116 (2752)–5 ft. (–1.52 m) 13,137 (5912) 13,137 (5912) 29,227 (13 152) 18,165 (8174) 20,085 (9038) 11,515 (5182) 14,041 (6318) 8,078 (3635) 10,454 (4704) 5,947 (2676)–10 ft. (–3.05 m) 20,410 (9185) 20,410 (9185) 29,737 (13 382) 18,194 (8187) 20,240 (9108) 11,401 (5130) 13,932 (6269) 7,979 (3591) 10,732 (4829) 5,940 (2673–15 ft. (–4.57 m) 23,981 (10 791) 23,981 (10 791) 27,435 (12 346) 18,518 (8333) 20,363 (9163) 11,558 (5201) 14,089 (6340) 8,121 (3654)–20 ft. (–6.10 m) 30,691 (13 811) 30,691 (13 811) 22,371 (10 067) 19,202 (8641) 16,362 (7363) 12,074 (5433)

With 32-in. (800 mm) shoes and 10-ft. 1-in. (3.10 m) arm20 ft. (6.10 m) 9,622 (4330) 9,622 (4330)15 ft. (4.57 m) 10,592 (4766) 10,592 (4766) 8,564 (3854) 7,079 (318610 ft. (3.05 m) 20,434 (9195) 20,434 (9195) 14,674 (6603) 13,876 (6244) 12,276 (5524) 9,584 (4313) 11,188 (5035) 6,879 (30965 ft. (1.52 m) 25,858 (11 636) 19,775 (8899) 18,130 (8159) 12,921 (5814) 14,163 (6373) 9,082 (4087) 11,313 (5091) 6,626 (2982)Ground Line 22,072 (9932) 19,051 (8573) 20,617 (9278) 12,282 (5527) 14,872 (6692) 8,688 (3910) 11,085 (4988) 6,417 (2888)–5 ft. (–1.52 m) 12,006 (5403) 12,006 (5403) 24,009 (10 804) 18,949 (8527) 21,723 (9775) 12,002 (5401) 14,635 (6586) 8,475 (3814) 10,984 (4943) 6,324 (2846)–10 ft. (–3.05 m) 23,108 (10 399) 23,108 (10 399) 28,900 (13 005) 19,127 (8607) 21,424 (9641) 12,008 (5404) 14,631 (6584) 8,471 (3812)–15 ft. (–4.57 m) 23,981 (10 791) 23,981 (10 791) 25,644 (11 540) 19,573 (8808) 19,306 (8688) 12,290 (5531)

With 32-in. (800 mm) shoes and 12-ft. 4-in. (3.75 m) arm20 ft. (6.10 m) 6,263 (2818) 6,263 (2818)15 ft. (4.57 m) 9,260 (4167) 9,260 (4167) 9,060 (4077) 7,214 (324610 ft. (3.05 m) 16,844 (7580) 16,844 (7580) 12,867 (5790) 12,867 (5790) 11,059 (4977) 9,745 (4385) 10,174 (4578) 6,958 (31315 ft. (1.52 m) 24,398 (10 979) 20,466 (9210) 16,575 (7459) 13,186 (5934) 13,119 (5904) 9,189 (4135) 11,328 (5098) 6,658 (2996Ground Line 28,839 (12 978) 19,229 (8653) 19,556 (8800) 12,395 (5578) 14,962 (6733) 8,720 (3924) 11,070 (4982) 6,392 (2876)–5 ft. (–1.52 m) 13,137 (5912) 13,137 (5912) 29,227 (13 152) 18,839 (8478) 21,254 (9564) 11,970 (5387) 14,591 (6566) 8,421 (3789) 10,887 (4899) 6,223 (2800)

–10 ft. (–3.05 m) 20,410 (9185) 20,410 (9185) 29,737 (13 382) 18,867 (8490) 20,240 (9108) 11,856 (5335) 14,481 (6516) 8,323 (3745) 10,732 (4829) 6,216 (2797–15 ft. (–4.57 m) 23,981 (10 791) 23,981 (10 791) 27,435 (12 346) 19,191 (8636) 20,363 (9163) 12,013 (5406) 15,514 (6936) 8,464 (3809)–20 ft. (–6.10 m) 30,691 (13 811) 30,691 (13 811) 22,371 (10 067) 19,876 (8944) 16,362 (7363) 12,529 (5638)

230LC BUCKETS

A full line of buckets is off ered to meet a wide variety of applications. The buckets have an adjustable bushing for side clearance, with the exception of the ditching bucket. Tooth selectionincludes either the John Deere Fanggs ®, Standard, Tiger, Twin Tiger, Abrasion panel, or Flare tooth, or the ESCO (Vertalok) Standard, Tiger, Twin Tiger, or Flare tooth. Replaceable cutting edgesare available through John Deere parts. Optional side cutters add 6 inches (150 mm) to bucket widths.

Bucket Bucket Bucket Arm Dig Force Arm Dig Force Arm Dig Force BucketType Bucket Width Capacity* Weight Dig Force 7 ft. 7 in. (2.32 m) 9 ft. 9 in. (2.96 m) 11 ft. 10 in. (3.61 m) Tip Radius No. Teeth

in. mm cu. yd. m 3 lb. kg lb. kN lb. kN lb. kN lb. kN in. mm

General-Purpose 24 600 0.95 0.73 1,453 659 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 3Plate Lip 30 750 1.20 0.92 1,731 785 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 4

36 900 1.48 1.13 1,845 836 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 542 1065 1.38 1.06 1,785 809 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 542 1065 1.75 1.34 1,966 891 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 548 1220 2.03 1.55 2,068 938 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 6

Heavy-Duty 30 750 0.95 0.73 1,930 876 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 4Plate Lip 36 900 1.16 0.89 2,075 942 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 5

42 1065 1.38 1.06 2,195 997 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 548 1220 1.60 1.22 2,359 1071 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 654 1370 1.82 1.39 2,507 1138 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 7

Heavy-Duty 24 600 0.92 0.70 1,765 800 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 3High Capacity 30 750 1.20 0.92 2,010 911 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 4

36 900 1.48 1.13 2,133 967 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 442 1065 1.75 1.34 2,279 1033 29,890 133.0 29,325 130.4 23,555 104.8 20,480 91.1 62.5 1588 5

Severe-Duty 36 900 1.16 0.89 1,921 871 34,280 152.5 30,940 137.6 24,655 109.7 21,315 94.8 54.5 1384 5Cast Lip 42 1065 1.38 1.06 2,119 961 34,280 152.5 30,940 137.6 24,655 109.7 21,315 94.8 54.5 1384 6Severe-Duty 30 750 0.95 0.73 2,080 943 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 4Plate Lip 36 900 1.16 0.89 2,179 988 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 4

42 1065 1.38 1.06 2,345 1063 33,065 147.1 30,520 135.8 24,370 108.4 21,100 93.9 56.5 1435 5Ditching 60 1500 1.34 1.02 1,562 708 39,750 176.8 32,620 145.1 25,780 114.7 22,160 98.6 47.0 1194 0

72 1800 1.66 1.27 1,759 797 39,750 176.8 32,620 145.1 25,780 114.7 22,160 98.6 47.0 1194 0

*All capacities are SAE heaped ratings.18

S P E C I F I C A T I O N S

8/10/2019 230LC+27 230LC+270LC.pdf0LC


270LC BUCKETS

A full line of buckets is off ered to meet a wide variety of applications. The buckets have an adjustable bushing for side clearance, with the exception of the ditching bucket. Tooth selectionincludes either the John Deere Fanggs ®, Standard, Tiger, Twin Tiger, Abrasion panel, or Flare tooth, or the ESCO (Vertalok) Standard, Tiger, Twin Tiger, or Flare tooth. Replaceable cutting edgesare available through John Deere parts. Optional side cutters add 6 inches (150 mm) to bucket widths.

Bucket Bucket Bucket Arm Dig Force Arm Dig Force BucketType Bucket Width Capacity* Weight Dig Force 10 ft. 2 in. (3.10 m) 12 ft. 4 in. (3.75 m) Tip Radius No. Teeth

in. mm cu. yd. m 3 lb. kg lb. kN lb. kN lb. kN in. mm

General-Purpose 24 600 0.95 0.73 1,453 659 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 3Plate Lip 30 750 1.20 0.92 1,731 785 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 4

36 900 1.48 1.13 1,845 836 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 542 1065 1.38 1.06 1,785 809 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 542 1065 1.75 1.34 1,966 891 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 548 1220 2.03 1.55 2,068 938 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 6

Heavy-Duty 30 750 0.95 0.73 1,930 876 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 4Plate Lip 36 900 1.16 0.89 2,075 942 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 5

42 1065 1.38 1.06 2,195 997 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 548 1220 1.60 1.22 2,359 1071 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 654 1370 1.82 1.39 2,507 1138 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 7

Heavy-Duty 24 600 0.92 0.70 1,765 800 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 3High Capacity 30 750 1.20 0.92 2,010 911 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 4

36 900 1.48 1.13 2,133 967 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 442 1065 1.75 1.34 2,279 1033 33,500 149.2 24,700 110.0 21,600 96.0 62.5 1588 5

Severe-Duty 36 900 1.16 0.89 1,921 871 38,420 171.1 25,820 115.0 22,453 100.0 54.5 1384 5Cast Lip 42 1065 1.38 1.06 2,119 961 38,420 171.1 25,820 115.0 22,453 100.0 54.5 1384 6

Severe-Duty 30 750 0.95 0.73 2,080 943 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 4

Plate Lip 36 900 1.16 0.89 2,179 988 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 442 1065 1.38 1.06 2,345 1063 37,059 165.1 25,530 113.7 22,234 99.0 56.5 1435 5

Ditching 60 1500 1.34 1.02 1,562 708 44,552 198.4 26,965 120.1 23,317 103.9 47.0 1194 072 1800 1.66 1.27 1,759 797 44,552 198.4 26,965 120.1 23,317 103.9 47.0 1194 0

*All capacities are SAE heaped ratings.

BUCKET SELECTION CHART 230LC 270LC

General-Purpose Heavy-Duty General-Purpose Heavy-Duty Bucket* Bucket* Bucket* Bucket*

Material (loose weight)Wood chips – 700 lb./cu. yd. (420 kg/m 3) ..................7.0 cu. yd. (5.4 m 3) — 8.0 cu. yd. (6.2 m 3) —Peat, dry – 750 lb./cu. yd. (440 kg/m 3) .......................6.0 cu. yd. (4.6 m 3) — 7.0 cu. yd. (5.4 m 3) —Cinders – 950 lb./cu. yd. (560 kg/m 3).........................4.25 cu. yd. (3.2 m 3) — 5.0 cu. yd. (3.9 m 3) —Peat, wet – 1,170 lb./cu. yd. (690 kg/m 3)....................3.75 cu. yd. (2.9 m 3) — 4.5 cu. yd. (3.5 m 3) —Topsoil – 1,600 lb./cu. yd. (950 kg/m 3) ......................2.5 cu. yd. (1.9 m 3) — 3.25 cu. yd. (2.5 m 3) —Coal – 1,780 lb./cu. yd. (1050 kg/m 3).........................2.5 cu. yd. (1.9 m 3) — 3.25 cu. yd. (2.5 m 3) —Caliche – 2,100 lb./cu. yd. (1250 kg/m 3) ....................1.25–1.75 cu. yd. 1.13–1.5 cu. yd. 1.5–2.0 cu. yd. 1.25–2.0 cu. yd.

(1.0–1.3 m 3) (0.9–1.1 m 3) (1.2–1.5 m 3) (1.0–1.5 m 3)Earth, loam – 2,100 lb./cu. yd.

(1250 kg/m 3) .........................................................1.75 cu. yd. (1.3 m 3) 1.5 cu. yd. (1.1 m 3) 2.25 cu. yd. (1.7 m 3) 2.0 cu. yd. (1.5 m 3)Shale – 2,250 lb./cu. yd. (1330 kg/m 3)........................1.75 cu. yd. (1.3 m 3) 1.5 cu. yd. (1.1 m 3) 2.25 cu. yd. (1.7 m 3) 2.0 cu. yd. (1.5 m 3)Sand, dry – 2,400 lb./cu. yd. (1420 kg/m 3) .................1.75 cu. yd. (1.3 m 3) 1.5 cu. yd. (1.1 m 3) 2.25 cu. yd. (1.7 m 3) 2.0 cu. yd. (1.5 m 3)Clay, dry – 2,500 lb./cu. yd. (1480 kg/m 3) ..................1.25–1.75 cu. yd. 1.38 cu. yd. (1.1 m 3) 1.5–2.0 cu. yd. 1.75 cu. yd. (1.3 m 3

(1.0–1.3 m 3) (1.2–1.5 m 3)Earth, dry – 2,550 lb./cu. yd. (1510 kg/m 3) . ...............1.25–1.63 cu. yd. 1.38 cu. yd. (1.1 m 3) 1.5–2.0 cu. yd. 1.75 cu. yd. (1.3 m 3

(1.0–1.2 m 3) (1.2–1.5 m 3)Limestone, broken or crushed – 2,600 lb./

cu. yd. (1540 kg/m 3) .............................................1.13–1.63 cu. yd. 1.0–1.38 cu. yd. 1.5–2.0 cu. yd. 1.38–1.75 cu. yd.(0.9–1.2 m 3) (0.8–1.0 m 3) (1.2–1.5 m 3) (1.1–1.3 m 3)

Earth, wet – 2,700 lb./cu. yd. (1600 kg/m 3) ................1.75 cu. yd. (1.3 m 3) 1.63 cu. yd. (1.2 m 3) 2.0 cu. yd. (1.5 m 3) 1.75 cu. yd. (1.3 m 3

Clay, wet – 2,800 lb./cu. yd. (1660 kg/m 3) .................1.63 cu. yd. (1.2 m 3) 1.5 cu. yd. (1.1 m 3) 2.0 cu. yd. (1.5 m 3) 1.75 cu. yd. (1.3 m 3

Rock, granite, blasted and broken – 2,800lb./cu. yd. (1660 kg/m 3) ........................................1.5–1.75 cu. yd. 1.25–1.5 cu. yd. 1.75–2.0 cu. yd. 1.5–1.75 cu. yd.

(1.1–1.3 m 3) (1.0–1.1 m 3) (1.3–1.5 m 3) (1.2–1.3 m 3)Sand, moist – 2,850 lb./cu. yd.

(1690 kg/m 3) .........................................................1.63 cu. yd. (1.2 m 3) 1.5 cu. yd. (1.1 m 3) 2.0 cu. yd. (1.5 m 3) 1.75 cu. yd. (1.3 m 3

Sand and gravel, dry – 2,900 lb./cu. yd.(1720 kg/m 3) .........................................................1.63 cu. yd. (1.2 m 3) 1.5 cu. yd. (1.1 m 3) 2.0 cu. yd. (1.5 m 3) 1.75 cu. yd. (1.3 m 3

Sand, wet – 3,100 lb./cu. yd. (1840 kg/m 3).................1.5 cu. yd. (1.1 m 3) 1.38 cu. yd. (1.0 m 3) 1.75 cu. yd. (1.3 m 3) 1.63 cu. yd. (1.2 m 3

Sand and gravel, wet – 3,400 lb./cu. yd.(2020 kg/m 3) .........................................................1.5 cu. yd. (1.1 m 3) 1.38 cu. yd. (1.0 m 3) 1.75 cu. yd. (1.3 m 3) 1.63 cu. yd. (1.2 m 3

*Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Larger bucketsmay be possible for flat and level operations, less compacted materials, and volume loading applications such as mass excavation applications in ideal conditions.Smaller buckets are recommended for adverse conditions such as off-level applications and uneven surfaces. Bucket capacity indicated is SAE heaped.

19

S P E C I F I C A

8/10/2019 230LC+27 230LC+270LC.pdf0LC


ENGINE

Auto-idle system Automatic belt tension device

Batteries (two 12 volt), 180-min. reservecapacity

Coolant recovery tank

Dual element dry-type air filter

Enclosed fan guard Conforms to SAE J1308

Engine coolant to –34°F (–37°C)

Fuel/water separator Full-flow oil filter

Isolation mounted

John Deere vertical spin-on fuel filter

Key start switch with electric fuel shutoff Oil-to-coolant engine oil cooler

Radiator trash screen

Turbocharger air cooler Underhood muffler with vertical curved

end exhaust stack

Electric ether starting aid Engine coolant heater

HYDRAULIC SYSTEM

Anti-drift valve for boom down, arm in

Auxiliary hydraulic valve section

Spring-applied, hydraulically released auto-matic swing brake

Auxiliary hydraulic lines

Auxiliary pilot and electric controls Hydraulic filter restriction indicator kit

Load-lowering control device

Single-pedal propel control

UNDERCARRIAGE

Planetary drive Propel motor shields

Track guides, front idler and center

Triple semi-grouser shoes, 24 in. (600 mm)

Triple semi-grouser shoes, 28 in. (700 mm) Triple semi-grouser shoes, 32 in. (800 mm)

Two-speed propel with automatic shift

Upper carrier rollers (2)

UPPERSTRUCTURE

Right- and left-hand mirrors Vandal locks with ignition key

Cab door

Fuel cap Service doors

230LC 270LC

Hydraulic shutoff lever, all controls

Hydraulic warm-up control

Interior light Mode selectors (illuminated)

Power modes – four

Travel modes – two with automatic shift Work modes – four

Monitor system with alarm featuresAuto-idle indicator light Engine air cleaner restriction indicator

light

Engine coolant temperature indicatorlight with audible alarm

Engine oil pressure indicator light withaudible alarm

Fluid levelEngine coolant level indicator light

Engine oil level indicator light

Hydraulic oil level indicator light Low alternator charge indicator light

Low fuel indicator light

Hydraulic oil filter restriction indicatorlight

Motion alarm with cancel switch

Conforms to SAE J994

Power boost switch on right control lever

Propel pedals and levers

SAE two lever control pattern

Seat belt, 2 in. (51 mm) Seat belt, 3 in. (76 mm)

Sound suppression

Tinted glass 24- to 12-volt D.C. radio convertors

Air conditioning

Alternate pilot control pattern Defroster fan

Window vandal protection covers

ELECTRICAL

Blade-type multi-fused circuits

By-pass start safety cover on starter Positive terminal battery covers

LIGHTSWork lights

Halogen, 33,000 candlepower (375,757 lux)

One mounted on boom One mounted on frame

FRONT ATTACHMENTS

Bucket-to-arm clearance adjustable bushing(except ditching bucket)

Centralized lubrication system

Dirt seals on all bucket pins No-boom-arm option

Arm, 7 ft. 7 in. (2.32 m)

Arm, 9 ft. 9 in. (2.96 m) Arm, 10 ft. 2 in. (3.10 m)

Arm, 11 ft. 10 in. (3.61 m)

Arm, 12 ft. 4 in. (3.75 m) Attachment quick couplers

Boom cylinder with plumbing to mainframefor no-boom-arm option

BucketDitching

General purpose

General purpose, high capacity Heavy duty

Heavy duty, high capacity

Severe duty, cast lip Severe duty, plate lip

Side cutters and teeth

Laser depth systems Material clamps

Super-long fronts OPERATOR’S STATION

Adjustable independent control positions(levers-to-seat, seat-to-pedals)

AM/FM radio

Built-in Operator’s Manual storage compart-ment and manual

Coat hook

Deluxe suspension cloth seat with adjustablearmrests

Floor mat Front windshield wiper with intermittent

speeds

Gauges (illuminated)Engine coolant

Fuel

Heater, 20,000 Btu/hr. (5.9 kW) withblower fan

Hinged roof panel

Horn, electric Hourmeter, electric

A D D I T I O N A L E Q U I P M E N T

SAFETYlivewithi

KEY: Standard equipment Optional or special equipment See your John Deere dealer for further information.

20

Net engine power is with standard equipment including air cleaner, exhaustsystem, alternator, and cooling fan, at standard conditions per SAE J1349 andDIN 6270B, using No. 2-D fuel at 35 API gravity. No derating is required up to10,000 ft. (3050 m) altitude. Gross power is without cooling fan.

Specifications and design subject to change without notice. Wherever applicable, specifications arein accordance with PCSA and SAE standards. Except where otherwise noted, these specifications arebased on units with 32-in. (800 mm) triple grouser shoes, full fuel tank, and 175-lb. (79 kg) operator;a 230LC unit with 11-ft. 10-in. (3.61 m) arm and 42-in. (1065 mm) 1.38-cu. yd. (1.06 m3) bucket;

and a 270LC unit with 12-ft. 4-in. (3.75 m) arm and 42-in. (1065 mm) 1.75-cu. yd. (1.34 m3) bucket.

230LC 270LC 230LC 270L

THE JDAdvantEDGE

JDAdvantEdge is a wealth of support programs, parts systems, and dealer resources, alldesigned to give you the edge. This package of special benefits is a major reason why

John Deere offers the “best value” for your equipment dollar. Best parts support – Twelve regional parts depots in North America and others

around the world put parts support near your job no matter where in the world it is.A computerized FLASHTM parts locating system linking these depots to dealerships

can find out-of-stock parts in a hurry and get them into your hands fast … usuallywithin 24 hours.

Best service backup – Dealer service technicians are regularly schooled, at ourmodern facility in Davenport, Iowa, or by professionals in the field, to diagnose quicklyand repair efficiently.

If they’re stumped, a phone call to DTAC (Dealer Technical Assistance Center) putsthem in touch with a staff of pros at the factory who help them find a solution quickly.

Best dealers – Your John Deere dealer is an important contributor to the JDAdvant-Edge. He or she is committed to being the best equipment supplier you can work with.

This is a dollars-and-cents commitment in parts inventory, in service facilities, infield-service trucks. It’s a sweat-and-blood commitment in dedicated, skilled, and highlytrained and motivated personnel in each and every department at the dealership.

But what sets John Deere dealers apart from all the rest is something more, a factorsomewhat difficult to measure … a caring attitude, and a sincere desire to be the bestat meeting the needs of each individual customer.

John Deere Finance Plans – Whether you rent, lease, or buy John Deere equip-ment, your dealer can explain the John Deere options available. One-stop options thatlet you free up operating capital, keep other lines of credit open. More solid benefits of the JDAdvantEdge.

Best protection – In addition to the new equipment warranty that meets orexceeds the competition, SECURE ® extended coverage, an optional service product for

John Deere equipment, is available for repair coverage after the warranty concludes.Full machine or power train coverage is available for a variety of time periods to meetyour needs. Consult your dealer for availability and details.

230lc+27 230lc+270lc.pdf0lc

Documents