24-in. load center machines - mijack canadar r®s. c.®e r®to k! sudden service, inc. 649 n. church...
TRANSCRIPT
Taylor machine works, inc.
ENGINEERING DONE RIGHT THROUGH
24-in. Load Center Machines
TX Series Models and CapacitiesTX-160 (16,000-lb. Cap. at 24" L.C., 97" WB)TX-175 (17,500-lb. Cap. at 24" L.C., 97" WB)TX-180S (18,000-lb. Cap. at 24" L.C., 101" WB)TX-200S (20,000-lb. Cap. at 24" L.C., 101" WB)TX-220S (22,000-lb. Cap. at 24" L.C., 101" WB)TX-250S (25,000-lb. Cap. at 24" L.C., 110" WB)TX-250M (25,000-lb. Cap. at 24" L.C., 121" WB)
TX-280S (28,000-lb. Cap. at 24" L.C., 110" WB)TX-280M (28,000-lb. Cap. at 24" L.C., 121" WB)TX-300S (30,000-lb. Cap. at 24" L.C., 110" WB)TX-300M (30,000-lb. Cap. at 24" L.C., 121" WB)TX-330S (33,000-lb. Cap. at 24" L.C., 110" WB)TX-330M (33,000-lb. Cap. at 24" L.C., 121" WB)TX-360M (36,000-lb. Cap. at 24" L.C., 121” WB)TX-360L (36,000-lb. Cap. at 24" L.C., 138" WB)
TX-360M*
*Featured truck is shown with available options.
Heavy-duty carriageShown with optional sideshift
Overhead tilt cylindersLess mast rail twisting than lowmount tilt cylinder designsGreater mast stability
Pin mounted full width adjustable forksShown with optional fork positioning
Taylor Machine Works was built on the premise, "We engineer and build what you need."This is just as true today as it was in 1927. We can design, engineer, and manufactureequipment tailored specifically to meet the material handling needs of your business.
Taylor Machine Works is acknowledged to be one of the top lift truck manufacturers in theworld today, and reaffirming that reputation is the TXH Series of lift trucks.
Mast mounted forward facingwork lights
TX-160 and TX-175 mast tilting10° forward and 10° backward
TX-180 through TX-360 mast tilting15° forward and 12° backward
Optional mast choices availableChoose from different configurationsto best fit your material handlingneeds
This series of lift trucks can boast 15 models to choose from, with lift capacities rangingfrom 16,000-lbs to 36,000-lbs at a 24” load center.
Carriage Groups60-in (TX-160 - TX-175)
84-in and 100-in (TX-180 - TX-360)
Simple design-• bolt-on housing• Timken tapered roller bearings• cast nylon side thrust pads• shims, if necessary
Minimal maintenance with more resistantto dynamic/shock loads with rough terrain,high lift, and/or offset loads
24-in. Load Center Machines
Lift with Confidence
The TX Series features the most dependable and diverseassortment of mast and carriages in its class. Known for theirinnovative design, these masts give you the confidence inknowing it will work every time you need it. Even whenmaintenance is required you can feel safe knowing ourengineers have designed our mast and carriages to be aseasy to maintain and repair as possible.
The telescopic, ULTRA-VU mast features a nested channelconstruction. The double-acting lift cylinders are positioned tothe rear of the mast rails while the multi-leaf lift chains arenested inside the mast rails. Two lifting eyes and bolt-on capspermit safe, easy removal of the mast in the event that repairis needed.
The pin-mounted forks are hammerforged from heat treated steel withincreased thickness in critical heelsections. The forks are fully adjustablefrom full width of carriage to +/-2-in.Lengths and widths vary depending onyour particular needs and model type.
The mast and carriage main rollers arecommon and use Timken® tapered rollerbearings.Chain rollers use sealed ball bearings.Common, cast nylon, side thrust pads areadjustable to compensate for wear.
Stance is widerand more stable for more
confident handling
The TX Series comes standard with top of theline features such as:• TIER certified high output engines• High capacity cooling systems• Heavy-duty transmissions• Heavy-duty planetary drive axles• Heavy-duty, proven design steer axles• TICS (Taylor Integrated Control System)• All-welded steel chassis
TaylorMax air cleaneroption shown
Heavy-duty bolted planetary drive axle6 planetary pin, force-cooled wet disc brakesBrake saver system does not allow operatorto drive through parking brakes
The TX Series 24-in. L.C. line of industrial pneumatic lift trucks was designed andengineered with the operator and service personnel in mind.Each model in the TX Series of lift trucks uses a Tier Certified Cummins® electronicturbocharged, charge air aftercooled (air to air) diesel engine. Standard engine featuresinclude electronic diagnostic and maintenance monitor, fuel/water separator andengine/transmission protection systems, improved fuel economy, and reduced emissions.
Climate control systemoption shown
Internal, force-cooled hydraulicactuated service brakesWet disc brake oil and hydraulic oil arecooled by hydraulic cooler
Easy access toaccessory valves
Easily removable side panelsfor better access to internalsEasy, under cab, access to the junctionbox and to reset circuit breakersSealed electrical connectorsAll wiring is color and number coded
Hydraulic tank –• easily removable• heavy gauge steel wall• serviceable filter element• remote mounted breather• internal suction screen• 25-gallon capacity
(TX160 – TX175)• 35-gallon capacity
(TX180 – TX220)• 50-gallon capacity
(TX250 – TX360)Full flow, in-tank, 10-Micronreturn filtration
ENGINE• Tier Certified Cummins electronic, low emissions (see specification sheet for engine detail)• Lower fan speed and engine speed for less noise• Electronic diagnostics on engine with fault code history for easy diagnostics and repair• Built-in emergency shut-down system for engine and transmission• All service and daily checks can be made easily from the running boards• High capacity charge air, engine coolant, transmission coolant and hydraulic oil cooling system• Easily serviceable 3-section cooling system
TRANSMISSION• Heavy-duty 3-speed Powershift transmission• High capacity 12-plate clutch system for added durability• Operator controlled hydraulic inching for precise vehicle position control• Automatic Powershift Control (APC)• Full directional modulation for soft directional changes• Transmission oil cooler is part of the 3-section cooling system• Cooler has wide fin spacing to resist plugging• Remote mounted filter to reduce oil spills• Flex-plate drive• Full width transmission mount goes from rail to rail in chassis for a more stable drivetrain
24-in. Load Center Machines
Dual element air cleanerwith restriction indicator
Heavy-duty steer axleis a single hydraulic cylinder design with heavy-dutylinks from the cylinder ram directly to tapered rollerbearing mounted spindles.
Hinged, greaseablebattery box door
Reliable Performance
Sliding engine hoodEasily removable for greater access(All service and daily checks can bemade easily from running boards)
Positive rim mountings
Transmission output shaftdisc mounted, parking brakeSpring on – Hydraulic offInstrument panel mountedcontrol
Both the fuel and hydraulic tankare easily removable
7-blade pusher fan
Engine mountedsealed fan shroudinsures maximumair flow
130 amp alternator12V electrical system
Spacious uncluttered cabwith tilt steering, hinge-down dash,climate controls and adjustableseatingPremium vinyl or cloth seat thatrotates 15° left and 20° right
Comfortable adjustable arm restwith fingertip joystick control forsmooth precise handling
Easy to understand diagnosticdisplay. TICS (Taylor IntegratedControl System) using CANbustechnology is standard on theTX Series.
Comfort & Safety
Two brake pedalsleft – brakes and inchingright – brakes only
The TX Series features a spacious, all steel cab with increased leg andhead room, sound deadening rubber mat flooring, tilt steering wheel,simple T-shaped dash, fingertip electric joystick controls, and optionalclimate control system for operator comfort and convenience.
The tilt steering column and the adjustable full-suspension air-ride seat places your operator in theutmost comfort. The right-side armrest’s adjustment capabilities allows even the most demandingoperator to place the truck’s controls within easy reach. The fingertip controls, on the the low effortjoystick, allow the operator to control the mast and carriage with ease and comfort.
This blend of ergonomics and technology will help your operator be more efficient with the job athand... handling materials.
24-in. Load Center Machines
Overhead rear work lightsfor improved safety and visibilityKey-switch actuated amberstrobe light
Sloped counterweightsfor improved rear visibility
Reverse activated alarm
Self cleaning, anti-slip, steps3-point mounting and dismounting
Extra large, shock absorbing, centermounted cab for operator comfort andnoise reductionTinted glass throughout the cabDual panoramic rear view mirrors - standardOptional pedestrian camera and monitor
Forward activated alarm
Front mast mounted work lightsfor improved safety and visibility
Unobstructed rear viewThe air snorkel and and shieldedexhaust are mounted on the cornersof the cab to keep the view open.
Quality Assured and
®
TMW-BR-106-01 9/15/10
The Best Support In The World!
Taylor Machine Works, Inc.650 North Church Avenue
Louisville, Mississippi 39339-2017Phone (662) 773-3421 Fax (662) 773-9146
taylorbigred.com
®
is a personal and collective commitment from the Taylor "Big Red" Team®
to every customer. Customer needs and expectations are the main prioritiesfor Taylor® engineering, manufacturing, marketing, and service organizations.
Sudden Service, Inc.® and our worldwide Taylor® dealer network are ready torespond to your requests for support twenty-four hours a day, seven days a week!
Sudden Service, Inc.649 N. Church Ave.
Louisville, MS 39339-2022Phone (662) 773-8056
Fax (662) 773-9157suddenserviceinc.com
youcandependon
Genuine Parts • Unbeatable Service • Trusted Support
No-one can match our recordfor service and reliability.
Worldwide customerservice, backed by over83 years of Taylor® customersatisfaction and trust.