2450mhz 10kw magnetron - relltubes.com...the h0915-60 is a continuous wave, fixed frequency...

6
2450MHz 10kW Magnetron H0915-60 40W267 Keslinger Road PO Box 393, LaFox, IL 60147 USA 1.800.348.5580 (USA & Canada) 1.630.208.2200 (International) www.rell.com | [email protected] Electronics assumes no responsibility for any errors which may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Richardson Electronics, Ltd. Description: The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica- tions. The H0915-60 operates at 2460 MHz and can supply 10 kW RF output power to a matched load. Characteristic Parameters: Frequency: 2460 ± 15 MHz (at matched load) Power: 10 kW (at matched load) Filament Voltage (Operational): see fig.1 Filament Voltage (Pre-heating): 5.8 V min., 6.2 V max. Filament Current (Pre-heating): 33 A (nominal) (31 A min., 35 A max.) Filament Surge Current (Peak): 200 A (max.) Filament Pre-heating time: see fig. 5 Recommended Operation: Continuous Anode Voltage: 8.8 V (nominal) (8.6 V min., 9.0 V max.) Magnet: Permanent magnet Average Anode Current: 1800 mA (max.) Peak Anode Current: 2200 mA (max.) Average Anode Input: 16 kW Load VSWR (Continous): 1.5 (max.) Anode Core Temperature: 130º C (max.) Storage Temperature: -30º C (min.) 60º C (max.) Case Temperature: 120ºC (max.) Cooling Water Flow: see fig. 4 Cooling Water Inlet Temp: see fig. 4 Note: Specifications subject to change without notice.

Upload: others

Post on 23-Apr-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 2450MHz 10kW Magnetron - relltubes.com...The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica-tions. The H0915-60 operates at

2450MHz 10kW MagnetronH0915-60

40W267 Keslinger RoadPO Box 393, LaFox, IL 60147 USA

1.800.348.5580 (USA & Canada)1.630.208.2200 (International)www.rell.com | [email protected]

Electronics assumes no responsibility for any errors which may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Richardson Electronics, Ltd.

Description:The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica-tions. The H0915-60 operates at 2460 MHz and can supply 10 kW RF output power to a matched load.

Characteristic Parameters:

Frequency: 2460 ± 15 MHz (at matched load)

Power: 10 kW (at matched load)

Filament Voltage (Operational): see fig.1

Filament Voltage (Pre-heating): 5.8 V min., 6.2 V max.

Filament Current (Pre-heating): 33 A (nominal) (31 A min., 35 A max.)

Filament Surge Current (Peak): 200 A (max.)

Filament Pre-heating time: see fig. 5

Recommended Operation: Continuous

Anode Voltage: 8.8 V (nominal) (8.6 V min., 9.0 V max.)

Magnet: Permanent magnet

Average Anode Current: 1800 mA (max.)

Peak Anode Current: 2200 mA (max.)

Average Anode Input: 16 kW

Load VSWR (Continous): 1.5 (max.)

Anode Core Temperature: 130º C (max.)

Storage Temperature: -30º C (min.) 60º C (max.)

Case Temperature: 120ºC (max.)

Cooling Water Flow: see fig. 4

Cooling Water Inlet Temp: see fig. 4

Note: Specifications subject to change without notice.

Page 2: 2450MHz 10kW Magnetron - relltubes.com...The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica-tions. The H0915-60 operates at

2450MHz 10kW MagnetronH0915-60

40W267 Keslinger RoadPO Box 393, LaFox, IL 60147 USA

1.800.348.5580 (USA & Canada)1.630.208.2200 (International)www.rell.com | [email protected]

Electronics assumes no responsibility for any errors which may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Richardson Electronics, Ltd.

Performance:

Note: Specifications subject to change without notice.

Figure 1: Reduction of filament voltage Figure 2: Performance chart

Page 3: 2450MHz 10kW Magnetron - relltubes.com...The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica-tions. The H0915-60 operates at

2450MHz 10kW MagnetronH0915-60

40W267 Keslinger RoadPO Box 393, LaFox, IL 60147 USA

1.800.348.5580 (USA & Canada)1.630.208.2200 (International)www.rell.com | [email protected]

Electronics assumes no responsibility for any errors which may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Richardson Electronics, Ltd.

Performance (continued):

Note: Specifications subject to change without notice.

Figure 3: Rieke diagram

Page 4: 2450MHz 10kW Magnetron - relltubes.com...The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica-tions. The H0915-60 operates at

2450MHz 10kW MagnetronH0915-60

40W267 Keslinger RoadPO Box 393, LaFox, IL 60147 USA

1.800.348.5580 (USA & Canada)1.630.208.2200 (International)www.rell.com | [email protected]

Electronics assumes no responsibility for any errors which may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Richardson Electronics, Ltd.

Performance (continued):

Note: Specifications subject to change without notice.

Figure 4a: Cooling requirements

Figure 4b: Cooling requirements

Figure 4c: Cooling requirements

Page 5: 2450MHz 10kW Magnetron - relltubes.com...The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica-tions. The H0915-60 operates at

2450MHz 10kW MagnetronH0915-60

40W267 Keslinger RoadPO Box 393, LaFox, IL 60147 USA

1.800.348.5580 (USA & Canada)1.630.208.2200 (International)www.rell.com | [email protected]

Electronics assumes no responsibility for any errors which may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Richardson Electronics, Ltd.

Performance (continued):

Note: Specifications subject to change without notice.

Figure 5: Timing Chart for Switching-ON of Both Filament & Anode Power Supply

Page 6: 2450MHz 10kW Magnetron - relltubes.com...The H0915-60 is a continuous wave, fixed frequency magnetron intended for use in industrial heating applica-tions. The H0915-60 operates at

2450MHz 10kW MagnetronH0915-60

40W267 Keslinger RoadPO Box 393, LaFox, IL 60147 USA

1.800.348.5580 (USA & Canada)1.630.208.2200 (International)www.rell.com | [email protected]

Electronics assumes no responsibility for any errors which may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Richardson Electronics, Ltd.

Dimensional Drawings:

Note: Specifications subject to change without notice.