24” marvel beverage center with two 60/40 split ... · 24” marvel beverage center with two...
TRANSCRIPT
24” Marvel Beverage Center with Two 60/40 Split Convertible Shelves™Model # ML24BCG1**
• Dynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability
• 60/40 Split Convertible Shelf™— cantilevered glass shelving, wine rack with a Vibration Neutralization System™ or both configurations all in one
• Rollout wine storage
• Solid, black-stained maple shelf fronts (natural maple shelf accessories available)
• MARVEL Intuit™ Integrated Controls ensure precise temperature management from 34°F to 42°F
• Thermal-efficient cabinet ensures optimum food preservation and energy efficiency while maximizing capacity
• Tinted, UV-resistant dual pane glass door protects wine from damaging ultra-violet light
• Two-stage, soft white theatre-style LED lighting and midnight black interior
• Cantilevered, fully adjustable shelving system
• Close Door Assist System™ gently and automatically closes door
• Audible and visual alarms signal when door is left ajar to protect food integrity and energy use
• Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements
• Height adjustment up to 1” with leveling legs
• 4” black adjustable toe kick
• 1-year warranty
Storage Capacity
Up to (162) 12-oz cans or (18) wine bottles
Storage Configuration
(2) cantilevered, full-width 60/40 Split Convertible Shelf™ black steel-framed glass shelf
(1) roller-glide 4-bottle wine rack
Product Dimensions
23⅞” W x 33¾” minimum H x 25⅝” D (including handle)
Finish/Door Options
Certified to meet ENERGY STAR® requirements
Stainless Steel
Ordering DetailsStainless Frame Glass Door, Right Hinge
ML24BCG1RS
Stainless Frame Glass Door, Left Hinge
ML24BCG1LS
Panel Overlay Frame Glass Door Integrated Right Hinge
ML24BCF2RP
Panel Overlay Frame Glass Door Integrated Left Hinge
ML24BCF2LP
Panel Overlay Frame Glass Door Integrated Right Hinge
ML24BCP2RP
Panel Overlay Frame Glass Door Integrated Left Hinge
ML24BCP2LPWood Overlay(Panel Ready)
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stabilityThe distinctive Marvel design features a thermal-efficient cabinet and door combined with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.
Front SideFront
ForcedAir Fan
Evaporator Plate
Return Air Intake
Front SideFront
ForcedAir Fan
Evaporator Plate
Return Air Intake
Width 23 ⅞"
Interior Finish Black
CapacityUp to 18 wine bottles or
up to 162 12-oz cans
Shelving System Cantilever
Shelf Fronts Black painted maple
Other Storage NA
Interior Lighting 2 White LED Pods
Toe Grill Finish Black
Hinge Classic Hinge
Handle Designer
Control Type Intuit™
Temperature Range 34° - 42° F
Lock NA
Electrical Requirements 120V / 60Hz / 15A
Length of Power Cord 5'
Product Dimensions 23 ⅞" W x 33 ¾" H x 21 ½" D
Depth to Front of Door 23 23/32"
Depth to Handle 25 21/32"
Depth with door at 90° 46 13/32"
Shipping Weight 160 lbs
Finishes SS, O
Vacation / Sabbath Mode
Yes
Agency Approvals CSA
Energy Star Certified
Finishes Key
SS = Stainless SteelO = Overlay
9
"F"
211⁄2"(54.6 cm)
* Depth dimension of rough-in opening may vary depend-ing on each individual installation. To recess entire door "F" dimension plus 1" (2.5 cm) for thickness of power cord plug is required.
** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet.
# A grounded 15 amp dedicated circuit is required. Follow all local building codes when installing electrical and appli-ance.
APPLIES TO THE FOLLOWING MARVEL MODELSML15BC MA24BCML15RA MA24BR
MA24RAML24BCML24BRML24RA
PRODUCT DATA
MODELELECTRICAL
REQUIREMENTS #PRODUCTWEIGHT
ML15**(G) or (S) 115V/60Hz/15A 105 lbs(47.7 kg)
ML15**(P) or (F) 115V/60Hz/15A 105 lbs(47.7 kg)
ML24**(G) or (S) 115V/60Hz/15A 140 lbs(63.6 kg)
ML24**(P) or (F) 115V/60Hz/15A 140 lbs(63.6 kg)
MA24**(G) or (S) 115V/60Hz/15A 140 lbs(63.6 kg)
MA24**(P) or (F) 115V/60Hz/15A 140 lbs((63.6 kg)
"D"
"E"
"H"
"J"
"G"
PRODUCT DIMENSIONS
Figure 8
! WARNING Floor mount Anti-tip Bracket must be installed for freestand-ing applications. Not required for built in applications.
"A"
"B"
"C"
Cabinet Dimensions
"D" "E" "F"
23 7⁄8”(60.7 cm)
33 3⁄4” to 34 3⁄4”(85.7 to 88.3 cm)
23 23⁄32”(60.2 cm)
“G” “H” “J”
25 21 ⁄32”(65.2 cm)
46 13⁄32”(117.9 cm)
25 11 ⁄16”(65.2 cm)
24" Rough-In Dimensions
"A" "B" "C"
24” (61 cm)
**34" to 35"(86.4 to 88.9 cm)
24”(61 cm)
Overlay Panels
14
! CAUTION
15⁄32"(2.9 cm)
Figure 17Right Hand Hinged Door
24" (61 cm) wide appliance
Figure 18Right Hand Hinged Door
24" (61 cm) wide appliance
OVERLAY DOOR PANEL INSTALLATION
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
Clearance for hinge
at top and bottom
2"(5.1 cm)
311⁄16"(9.4 cm)
11⁄2"(3.8 cm)typical
1⁄4"(6 mm)Deep
Hin
ge s
ide
of d
oor
Clearance for screw head, 4 places
3011⁄32"(77.1 cm)
111⁄16"(4.3 cm)
233⁄4"(60.3 cm)
31⁄8"(7.9 cm)
Top of door
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
41⁄8"(10.5 cm)
1⁄4" (6 mm)radius ispermissible
This sideto door
31⁄8"(7.9 cm)
327⁄32"(9.8 cm)
13⁄16"(3 cm)
14"(35.6 cm)
47⁄8"(12.4 cm)
For comprehensive installation instructions, please visit www.marvelrefrigeration.com
18
OVERLAY DOOR PANEL INSTALLATION
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
MODELDOOR
DESCRIPTION DIM "A"ML15RAP*RP Solid, Right Hand
3011⁄32" (77.1 cm)
ML15RAP*LP Solid, Left HandML15BCF*RP Glass, Right HandML15BCF*LP Glass, Left HandML15BCP*RP Solid, Right HandML15BCP*LP Solid, Left HandML24RAP*RP Solid, Right HandML24RAP*LP Solid, Left HandML24BRF*RP Glass, Right HandML24BRF*LP Glass, Left HandML24BRP*RP Solid, Right HandML24BRP*LP Solid, Left Hand
MA24BRF*RP Glass, Right Handwith Lock
2723⁄32" (70.4 cm)MA24BRF*LP Glass, Left Hand
with Lock
MA24RAP*RP Solid, Right Handwith Lock
MA24RAP*LP Solid, Left Handwith Lock
Table C Table D
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
18
OVERLAY DOOR PANEL INSTALLATION
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
MODELDOOR
DESCRIPTION DIM "A"ML15RAP*RP Solid, Right Hand
3011⁄32" (77.1 cm)
ML15RAP*LP Solid, Left HandML15BCF*RP Glass, Right HandML15BCF*LP Glass, Left HandML15BCP*RP Solid, Right HandML15BCP*LP Solid, Left HandML24RAP*RP Solid, Right HandML24RAP*LP Solid, Left HandML24BRF*RP Glass, Right HandML24BRF*LP Glass, Left HandML24BRP*RP Solid, Right HandML24BRP*LP Solid, Left Hand
MA24BRF*RP Glass, Right Handwith Lock
2723⁄32" (70.4 cm)MA24BRF*LP Glass, Left Hand
with Lock
MA24RAP*RP Solid, Right Handwith Lock
MA24RAP*LP Solid, Left Handwith Lock
Table C Table D
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
15
Step 2: Remove the door gasketWith the door laying on a flat surface and starting at a corner of the door remove the magnetic door gasket from the interior side of the door, see Figure 12. Set the gasket aside on a flat surface.
There are 10 holes in the gasket retainer extrusions, (3 on each side and 2 at the top and bottom which are used to fasten the panel to the front of the door. The screws are provided in the literature pack along with the door lock, which is provided on certain models.
Figure 11
Press and hold down this tab on the wire connec-tor and pull the connector apart.
Figure 12
Figure 12a
Overlay panel flush with top
of door.
Holes in gasket
retainer.
Magnetic Gasket remove starting at a corner, grasp and pull away from the door.
OVERLAY DOOR PANEL INSTALLATION
Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20. Also see Table "D" for the height dimension and door styles. The window cut out is for glass door models only. If your appliance has a lock also drill the lock hole in the panel, see Figure 22.
Overlay panel to be centered on width of door.
15
Step 2: Remove the door gasketWith the door laying on a flat surface and starting at a corner of the door remove the magnetic door gasket from the interior side of the door, see Figure 12. Set the gasket aside on a flat surface.
There are 10 holes in the gasket retainer extrusions, (3 on each side and 2 at the top and bottom which are used to fasten the panel to the front of the door. The screws are provided in the literature pack along with the door lock, which is provided on certain models.
Figure 11
Press and hold down this tab on the wire connec-tor and pull the connector apart.
Figure 12
Figure 12a
Overlay panel flush with top
of door.
Holes in gasket
retainer.
Magnetic Gasket remove starting at a corner, grasp and pull away from the door.
OVERLAY DOOR PANEL INSTALLATION
Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20. Also see Table "D" for the height dimension and door styles. The window cut out is for glass door models only. If your appliance has a lock also drill the lock hole in the panel, see Figure 22.
Overlay panel to be centered on width of door.
19
Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock extension, cam stop washer, spring washer, and set screw to the lock as shown in Figure 21 and 23.
Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.
OVERLAY DOOR PANEL INSTALLATION
17⁄32"(13.7 mm)
31/2"(89 mm)
1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.
Hin
ge s
ide
of d
oor
Counter bore lock holeon back side.
Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.
SECTION A-A SCALE 1 : 1
LOCK
NUT
BRASS EXTENSION
CAM
PHILLIPS SCREW
13/16 COUNTERBORE 7/16 DEEP
1/2 HOLE
3/4 INCHWOOD PANEL
SPRING WASHER
INNERDOOR
Figure 21
Figure 22a
#10 x 1/2"screw
Figure 22
17
Figure 18Left Hand Hinged Door
24" (61 cm) wide appliance
! CAUTION
OVERLAY DOOR PANEL INSTALLATION
Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
Figure 20Right Hand Hinged Door
24" (61 cm) wide appliance
233⁄4"(60.3 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places
47⁄8"(12.4 cm)
327⁄32"(9.8 cm)
13⁄16"(3 cm)
14"(35.6 cm)
1⁄4" (6 mm)radius ispermissible
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
"A"(See Table D)
2"(5.1 cm)
311⁄16"(9.4 cm)
41⁄8"(10.5 cm)
11⁄2"(3.8 cm)typical
1⁄4"(6 mm)Deep
111⁄16"(4.3 cm)
Hin
ge s
ide
of d
oor
Top of door
Clearance for hingeat top and bottom
Clearance for hingeat top and bottom
Clearance for screw head,
4 places
Figure 17Left Hand Hinged Door
24" (61 cm) wide appliance
233⁄4"(60.3 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
47⁄8"(12.4 cm)
327⁄32"(9.8 cm)
13⁄16"(3 cm)
14"(35.6 cm)
1⁄4" (6 mm)radius ispermissible
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
"A"(See Table D)
2"(5.1 cm)
311⁄16"(9.4 cm)
41⁄8"(10.5 cm)
11⁄2"(3.8 cm)typical
1⁄4"(6 mm)Deep
111⁄16"(4.3 cm)
Hin
ge s
ide
of d
oor
Top of door
Clearance for screw head, 4 places
Figure 19Right Hand Hinged Door
24" (61 cm) wide appliance
This sidefacing interior
This sidefacing interior
15⁄32"(2.9 cm)
15⁄32"(2.9 cm)
17
Figure 18Left Hand Hinged Door
24" (61 cm) wide appliance
! CAUTION
OVERLAY DOOR PANEL INSTALLATION
Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
Figure 20Right Hand Hinged Door
24" (61 cm) wide appliance
233⁄4"(60.3 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places
47⁄8"(12.4 cm)
327⁄32"(9.8 cm)
13⁄16"(3 cm)
14"(35.6 cm)
1⁄4" (6 mm)radius ispermissible
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
"A"(See Table D)
2"(5.1 cm)
311⁄16"(9.4 cm)
41⁄8"(10.5 cm)
11⁄2"(3.8 cm)typical
1⁄4"(6 mm)Deep
111⁄16"(4.3 cm)
Hin
ge s
ide
of d
oor
Top of door
Clearance for hingeat top and bottom
Clearance for hingeat top and bottom
Clearance for screw head,
4 places
Figure 17Left Hand Hinged Door
24" (61 cm) wide appliance
233⁄4"(60.3 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
47⁄8"(12.4 cm)
327⁄32"(9.8 cm)
13⁄16"(3 cm)
14"(35.6 cm)
1⁄4" (6 mm)radius ispermissible
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
"A"(See Table D)
2"(5.1 cm)
311⁄16"(9.4 cm)
41⁄8"(10.5 cm)
11⁄2"(3.8 cm)typical
1⁄4"(6 mm)Deep
111⁄16"(4.3 cm)
Hin
ge s
ide
of d
oor
Top of door
Clearance for screw head, 4 places
Figure 19Right Hand Hinged Door
24" (61 cm) wide appliance
This sidefacing interior
This sidefacing interior
15⁄32"(2.9 cm)
15⁄32"(2.9 cm)