25270_28_en
TRANSCRIPT
-
7/26/2019 25270_28_en
1/2
Top of Tank Line, SS Type: 25270/28Design meets the requirements of PED 97/23/EC and harmonized standards
Purchase Order Data
Company: Project:
Purchase order No.:
Quantity: Tag No.:
Operating Conditions
Fluid:
Density: 0.55g/cm3 g/cm3:
Viscosity: 600cSt cSt:
Operation pressure: max. 28bar(g)@20C *1) bar(g):
Design pressure: " bar(g):
Operation temperature: -40C ... +400C *1) C:
Design temperature: " C:Gaskets for top service connection: NBR / PTFE / Graphite
Process Connections Special flange execution
Process flange EN1092-1:2013
- EN1092-1/01 A/DN50/PN40/316L
- Type A : with flat face
Process flange ASME B16.5:2013
- ANSI/ASME B16.5 / 2'' class 300 RFSF
- RF SF: with raised face
Dimensions
Tank depth L
Length L1 (M + 245 mm)
C1
C2
Measuring length M (L - 200 mm)
Length L4 (M + 100 mm)
Connection pipe length L5 (L - 140 mm)
Immersion depth E
Design and Materials
-- -
0 0
0 0
95
150
0 0
0
-06-
-
Standard Special
-
7/26/2019 25270_28_en
2/2
Design and Materials
Max. 28bar(g)@20C, up to max. 500C for ToT float chambers in SS EN 1.4401, 1.4436 & 1.4404, 1.4435 resp. ANSI 316&316L
Other flanges on request
Notes:
- EN1092-1:2013 flange PN10 and PN16 up to DN150use identical interface dimensions
- EN1092-1:2013 flange PN25 and PN40 up to DN150use identical interface dimensions
- Tolerated max. pressure @ specified temperaturefor the ToT is given eithter by the
float chamber or by the process flange
--- Lower value sets the limitation! ---
DS_VLI_Top_of_Tank_Line_20150716_E WEKA AG - Schrlistrasse 8 - CH-8344 Bretswil
Subject to change without notice Phone +41 43 833 43 43 - Fax +41 43 833 43 49
revised 06.11.2013/ Wb [email protected] - www.weka-ag.ch
-07-
Operatingrang
e AlNiCo Magnet
NBR gasket
Pressure-temperature rating for Top of Tank Line SS 25270/28
Graphite pure ore spiral wound gasket 316
PC indication rail
Al or SS standard indication rai l
Al oder SS high temperature indication rail
SS screws and nuts in A2-70
PTFE pure or spiral wound gasket 316
6.0 6.0 6.0 6.0 5.4 5.0 4.7 4.4 4.2 4.1 4.03.9
16.0 16.0 16.0
16.0
14.513.4
12.7
11.8 11.410.9 10.7
10.5
38.5
35.7
33.4
31.630.3
29.4 28.828.2
0.0
5.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
-200 -150 -100 -50 0 50 100 150 200 250 300 350 400 450 500
Pressure(barg)
Temperature of fluid (C)
ToT Type 25270/28
Additional range of float chamberwithout float and magnet holder
EN 1092-1:2013 PN6 flangedouble certified 1.4401/1.4436 & 1.4404/1.4435Material group 14E0
EN 1092-1:2013 PN16 flangedouble certified 1.4401/1.4436 & 1.4404/1.4435Material group 14E0
EN 1092-1:2013 PN40 flangedouble certified 1.4401/1.4436 & 1.4404/1.4435Material group 14E0
ASME B16.5:2013 class150 flangedouble certified 316&316LMaterial group 2.2 resp. 2A2
ASME B16.5:2013 class300 flangedouble certified 316&316LMaterial group 2.2 resp. 2A2