25.aug.2003

A selection of level sensors made in stainless steel

Level sensor type S3Replace Type S2 and W2

• Material: 316 stainless steel.

• 1 ¼” BSP threads for assembly in tank.

• For level measurement, all characteristics can be made available.

• For fuel and water

Level sensor type S5 Replace Type TR

• Material: 316 stainless steel.

• Standard 5-hole flange for assembly in tank.

• For level measurement, all characteristics can be made available.

• For fuel and water.

Level sensor type SD Replace type TRD

• Material: 316 stainless steel.

• Standard 5-hole flange for assembly in tank.

• For level measurement, all characteristics can be made available.

• Damping tube gives stable reading on non damped gauges.

• For fuel, water and holding tanks

Level sensor type TN

• Material: 304 stainless steel• Standard bayonet fitting for

assembly in tank.• For level measurement, all

characteristics can be made available.

• Tubes for suction and return of fuel

• Option: Filter• Option: Air vent pipe.• On request: Material in 316

stainless steel.

Fuel sensor type TB

• Material: 304 stainless steel• Standard bayonet fitting for

assembly in tank.• For level measurement, all

characteristics can be made available.

• Tubes for suction and return of fuel

• Option: Filter (as shown)• Option: Air vent pipe.• On request: Material in 316

stainless steel.

Options

All our sensors can be custom made in terms of:

• Filter and filter position.

• Dimensions of tubes• Lengths• Characteristics (Ohm)• Cable length and type• Electrical connections

Level sensor type TU

• Material: Sensor head made in PA-GF30 (Nylon, reinforced with glass fiber), tube in 316 stainless steel.

• Standard bayonet fitting for assembly in tank.

• For level measurement, all characteristics can be made available.

• For AdBlue, fuel and water

Sensor type TZAdBlue sensor in 316 stainless steel and PA-GF30

Suction/return AdBlue, level indication, tubes for water heating and ventilation

Cover with M16x1.5 threads

• Material: Made in PA-GF30 (Nylon, reinforced with glass fiber.

• Standard bayonet fitting for assembly in tank.

• M16 threads for standard fittings (Air ventilation or connection to second tank)

• Standard color: black

Cover

• Material: Made in PA-GF30 (Nylon, reinforced with glass fiber.

• Standard bayonet fitting for assembly in tank.

• Standard color: black