26-INCH 36V 10AH CITY BREEZE WOMEN'S ELECTRIC ROAD BIKE FS26LDYEBKA

• For safety reasons, it is most important that you read this Quick Start Guide before you operate the bike. Improper handling can reduce its riding performance and most importantly, cause danger to your safety and health.

• Never attempt to dismantle or disassemble any of the electric components of the bike.

• Ensure all parts are tightened and locked before riding.

• Ensure that the battery charger and charging plug are always kept dry.

• The charger should only be cleaned with a dry cloth. Never use a cloth wet with oil or any other liquid.

Know your electric bike This product incorporates many features and functions that have not previously been commonly built into bicycles. Read this Quick Start guide thoroughly to ensure your familiarity with these features and how they affect usage of the bike.

Ride defensively

• Always be aware of other vehicles around you. • Do not assume that drivers or other cyclists see you. • Always be prepared to take evasive action or stop suddenly.

SAFETY & WARNINGS

WARNING: Always wear a helmet

• Helmets can significantly reduce the possibility and severity of head injuries. Always wear a helmet that complies with your state laws when riding the bike.

• Check with your local police department for requirements in your community. • Do not wear loose clothing that can become tangled in the moving parts of the

bike. • Wear sturdy shoes and eye protection. Check your state laws concerning other

protective wear that may be required when riding the bike.

Make yourself easy to see Make yourself more visible by wearing bright reflective (high visibility) clothing. Keep any reflectors (not included) clean and properly aligned. Signal before turning so that drivers and other cyclists can anticipate your actions.

Ride within your limits Take it slow until you are familiar with the conditions that you typically encounter. Be very careful in wet conditions as traction can be greatly reduced and brakes become less effective.

Never ride beyond your abilities. Remember that alcohol, drugs, fatigue and inattention can significantly reduce your ability to make good judgments and ride safely.

Know the law Cyclists are required to adhere to traffic rules. Additionally, some communities regulate the use of motorised bicycles regarding minimum age requirements and necessary equipment.

Check with your local police department for specific details.

Correct frame size

• When selecting a new bicycle, the frame size is a very important safety consideration. Most full-sized bicycles come in a range of frame sizes. These sizes usually refer to the distance between the centre of the bottom bracket and the top of the frame seat tube.

• For safe and comfortable riding, there should be a clearance of 3.3-5cm between the groin area of the intended rider and the top tube of the bicycle frame, while the rider straddles the bicycle with both feet flat on the ground.

• The ideal clearance will vary depending on the type of bicycles and rider preference. This makes straddling easier when off the seat and safer in situations such as sudden stops.

Battery care

• Ensure to check over the battery pack before using for the first time.

• The battery pack will arrive partially charged. To ensure full battery pack capacity, completely charge the battery pack before using it for the first time.

• Even with proper care, rechargeable batteries do not last forever. Every time the battery is discharged and subsequently recharged, its relative capacity decreases by a small percentage. You can maximise the life of your battery by following the instructions below.

• The recommended charge time for the Li-ION battery is 5-6 hours.

• For a complete, 100% charge, leave the battery on the charger for one full hour after the charger indicator light turns green.

• Never charge batteries for more than 18 hours straight.

• Li-ion batteries do not have a “memory”. Partial discharge/charge cycles will not harm the batteries' capacity or performance.

• The rated output capacity of the battery is measured at 25°C. Any variation in this temperature will alter the performance of the battery and shorten its expected life. High temperatures will reduce overall battery life and run time.

• Always be sure to turn the bike power switch to “OFF” after every use. If you leave the power switch in the “ON” position or your product has not been charged for a long period, the battery may reach a stage at which it will no longer hold power.

WARNING: Many electric bicycle service and repair tasks require specialised knowledge and tools. Do not attempt to perform any adjustments/modifications or services on the product if you are not qualified or authorised to perform them. Improper adjustment or service may result in damage to the product or accidents which can cause serious injury or death.

Helmets When riding a bicycle, always wear a properly fitted helmet which completely covers the forehead. Many states require specific safety devices. It is the user’s responsibility to familiarise themselves with the laws of the state where the product is used and to comply with all applicable laws, including properly equipping the rider and bike as the law requires.

The correct helmet should:

• Be comfortable

• Be lightweight

• Have good ventilation

• Fit correctly

• Cover your forehead

Display overview

A Voltage for showing the power level for the battery.

B Speed for showing the current speed by pedal assist.

C

Five assist levels, the biggest one-fifth level, add the assist level by pressing the button “up”, “down” button for decreasing assist level.

D

Mileage for recording the distance which Electric Bike covers, when it is full of one mile, the displayer showing the figure.

OVERVIEW

Reflector

Rear carrier Magnesium alloy

Removable battery

Saddle

Seat post

Frame

Outer tube

Head tube

Handlebar

Grip Brake level

Basket

Headlight Magnesium

fork

Holder

Front fender Rim

Front disc brake Reflector

Pedal Crank set

Chain Rear fender Chain

Rear derailleur Disc brake

Handlebar installation

A. Insert the handlebar stem into the frame.

B. Lift the quick-release then close to lock the stem in place.

A B

Saddle installation

A. Insert the seat post into the seat post tube.

B. Rotate the quick-release latch by hand and tighten.

A B

ASSEMBLY

Pedal installation

A. The pedals are a pair marked with “R” & “L”; “R” for right, “L” for left.

B. Screw the pedals into the relevant pedal arm.

C. Tighten by wrench.

Left pedal and right pedal Rotate the pedal into pedal arm

Rotate to front to fasten the pedal

Battery charging

Adaptor Australia standard plug Battery connector plug

• Connect the adaptor to the power plug, then connect the battery connection to the battery.

• Plug in the power cable, and the light will turn red to indicate charging is in process. • The battery is fully charged when the light has turned green.

Charging Fully charged

Riding the electric bike

A. Insert the key into the ignition and turn clockwise to ON to power up the battery.

B. Press and hold the middle button of the display to switch on power to the bike.

C. Pedal forward one and a half rotations to power on the motor.

D. Ensure to pay careful attention to your surroundings when starting up the electric bike.

Frame 6061 aluminium

Front fork Magnesium alloy

Motor 250W brushless

Battery 36V/10Ah lithium Ion battery

Brake Front and rear disc brakes

Derailleur Shimano 6-speed

Range 45km

Charging time 5-6 hours

Maximum loading 110kg

Weight without/with battery 28kg/30kg

Packing size 143 x 25 x 65.5cm

SPECIFICATIONS

Seat Saddle pedals

Charger Assembly tools

Electric bike

IN THE BOX

NOTES

Need more information? We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require,

head online to help.kogan.com